price sheet/boq - engineering projectsengineeringprojects.com/.../2795_004---price-bid.pdf ·...

Total Amount(

Rs.)

1 2 3 4 5= (3 x 4 ) 3 + 5

In figures In words In figures In words

1

CONSTRUCTION

COST(A)434728095.9

2

ELECTRICAL

WORKS (B)50631482.88

3

INTERNAL

PLUMBING

WORKS( C)

22039179.51

4

EXTERNAL

DEVELOPMENT

WORKS(D)

77787937.22

585186695.5

PRICE SHEET/BOQ

Construction of Proposed ITBP Complex at 53rd Bn. PO –Palin ,Mandal -Kalikiri,

Distt- Chittoor, AP-517234PRICE SCHEDULE

SI. No. DESCRIPTION

ESTIMATED COST

(Rs.)

TO BE QUOTED BY TENDERER

% ( - ) Below / At ParAmount ( - ) Below / At

Par Estimated Cost

SIGNATURE OF BIDDER WITH

SEAL

TOTAL COST

TOTAL AMOUNT IN WORDS TO BE QUOTED BY CONTRACTOR

SUM

DSR - ITEMS NON DSR - ITEMS

1.0 CONSTRUCTION COST (A) 3704,92,987.88 411,81,345.27

2.0 ELECTRICAL WORKS (B) 212,40,365.00 267,06,115.00

3.0 INTERNAL PLUMBING WORKS (C) 161,14,898.50 47,55,536.65

4.0 EXTERNAL DEVELOPMENT WORKS (D) 576,42,255.31 160,20,564.04

Total Cost (X) = A+B+C+D 4654,90,506.69 886,63,560.96

Grand Total

Grand Total (in Crores) 55.42

Detailed Estimate for Construction of Proposed ITBP Complex at Kalikiri,

Chittoor (A.P)

SUMMARY OF COST

S.No DESCRIPTION TOTAL AMOUNT (Rs.)

5541,54,067.65

Page 1 of 1

SUM

DSR - ITEMS NON DSR - ITEMS

1.0 EARTH WORK 7472790.95

2.0 CONCRETE WORK 10877374.65

3.0 REINFORCED CEMENT CONCRETE 190243239.97

4.0 MASONRY WORK 44227662.40

5.0 STONE WORKS 10450720.02

6.0 MARBLE & GRANITE WORK 3149204.35 908600.00

7.0 WOOD AND PVC WORK 28608934.55 13488730.25

8.0 STEEL WORKS 11609860.22

9.0 FLOORING WORKS 20274762.80 15176434.00

10.0 ROOFING WORKS 450696.20

11.0 FINISHING WORK 32885618.00 1156861.00

12.0 ROAD FANCING & ROAD WORK

13.0 ALUMINIUM WORK 8764738.95

14.0 WATER PROOFING WORK 11928104.85

I CONSTRUCTION COST (X) 370492987.88 41181345.27

II ELECTRICAL WORKS (Y)

III INTERNAL PLUMBING WORKS (Z)

Total Cost (A) = X+Y+Z 370492987.88 41181345.27

TOTAL (C+D+E)

Grand Total (in Crores) 41.17

Detailed Estimate for Construction of Proposed ITBP Complex at Kalikiri,

Chittoor (A.P)

SUMMARY OF COST

S.No DESCRIPTION TOTAL AMOUNT (Rs.)

411674333.15

Page 1 of 1

Estimate-

DSR - ITEMS NON DSR -

ITEMS

1.0 2.0 EARTH WORK

1.1 2.6 Earth work in excavation by mechanical means (Hydraulic excavator) /

manual means over areas (exceeding 30cm in depth. 1.5 m in width

as well as 10 sqm on plan) including disposal of excavated earth, lead

upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly

dressed.

1.1.1 2.6.1 All kinds of soil Cum 32.00 155.60 4979.20

1.2 2.7 Earth work in excavation by mechanical means (Hydraulic excavator) /

manual means over areas (exceeding 30 cm in depth, 1.5 m in width

as well as 10 sqm on plan) including disposal of excavated earth, lead

upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly

dressed.

1.2.1 2.7.1 Ordinary Rock Cum 32.00 244.60 7827.20

1.2.2 2.7.3 Hard rock (blasting prohibited) Cum 42.00 618.10 25960.20

1.3 2.8 Excavation work by mechanical means (Hydraulic excavator)/ manual

means in foundation trenches or drains (not exceeding 1.5m in width or

10 sqm on plan), including upto 1.5 m, including getting out the

excavated soil and disposal ofdressing of sides and ramming of

bottoms, lift surplus excavated soils as directed, within a lead of 50 m.


1.4 2.9 Excavation work by mechanical means (Hydraulic excavator)/ manual

means in foundation trenches or drains (not exceeding 1.5m in width or

10 sqm on plan), including upto 1.5 m, including getting out the

excavated soil and disposal ofdressing of sides and ramming of

bottoms, lift surplus excavated soils as directed, within a lead of 50 m.

1.4.1 2.9.1 Ordinary Rock Cum 4515.00 263.50 1189702.50

1.4.2 2.9.3 Hard rock (blasting prohibited) Cum 4692.00 620.55 2911620.60

QUANTITY

Schedule of Quantities for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)

S.No.DSR -

CodeDESCRIPTION OF ITEMS UNIT

RATE

(Rs.)

AMOUNT (Rs.)

1/29

Estimate-


ITEMS

QUANTITY


S.No.DSR -


RATE

(Rs.)

AMOUNT (Rs.)

1.5 2.25 Filling available excavated earth (excluding rock) in trenches, plinth,

sides of foundations etc. in layers not exceeding 20cm in depth,

consolidating each deposited layer by ramming and watering, lead up

to 50 m and lift upto 1.5 m.

Cum 11297.00 112.40 1269782.80

1.6 2.26 Extra for every additional lift of 1.5 m or part thereof in excavation /

banking excavated or stacked materials


1.6.2 2.26.2 Ordinary or hard rock Cum 2030.00 82.95 168388.50

1.7 2.34 Supplying chemical emulsion in sealed containers including delivery as

specified

1.7.1 2.34.1 Chlorpyriphos / Lindane emulsifiable concentrate of 20% Litre 2313.00 185.95 430102.35

1.8 2.35 Diluting and injecting chemical emulsion for POST-

CONSTRUCTIONAL anti-termite treatment (excluding the cost of

chemical emulsion):

1.8.1 2.35.1 Along external wall where the apron is not provided using chemical

emulsion @ 7.5 litres / sqm of the vertical surface of the substructure

to a depth of 300 mm including excavation channel along the wall &

rodding etc. complete:

1.8.1.1 2.35.1.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration. Metre 2670.00 15.40 41118.00

1.9 16.3 Supplying and stacking at site

1.9.1 16.3.8 Red bajri Cum 256.00 1459.40 373606.40

1.9.2 16.3.9 Good Earth Cum 1408.00 320.90 451827.20

TOTAL OF EARTH WORKS 7472790.95

2/29

Estimate-


ITEMS

QUANTITY


S.No.DSR -


RATE

(Rs.)

AMOUNT (Rs.)

2.0 4.0 CONCRETE WORK

2.1 4.1 Providing and laying in position cement concrete of specified grade

excluding the cost of centring and shuttering -

All work upto plinth level:

2.1.1 4.1.3 1:2:4 (1 Cement: 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size)Cum 284.00 5466.30 1552429.20

2.1.2 4.1.8 1:4:8 (1 Cement: 4 coarse sand : 8 graded stone aggregate 40 mm

nominal size)Cum 1973.00 4301.15 8486168.95

2.2 4.11 Providing and laying damp-proof course 50mm thick with cement

concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate

20mm nominal size).

Sqm 258.00 314.85 81231.30

2.3 4.12 Extra for providing and mixing water proofing material in cement

concrete work in doses by weight of cement as per manufacturer's

specifications

Per 50

Kg

Cement

126.00 48.15 6066.90

2.4 4.13 Applying a coat of residual petroleum bitumen of grade of VG-10 of

approved quality using 1.7kg per square metre on damp proof course

after cleaning the surface with brushes and finally with a piece of cloth

lightly soaked in kerosene oil.

Sqm 258.00 132.00 34056.00

2.5 4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1

cement :3 coarse sand : 6graded stone aggregate 20mm nominal size)

over 75mm bed by dry brick ballast 40mm nominal size well rammed

and consolidated and grouted with fine sand including finishing the top

smooth

Sqm 1711.00 419.30 717422.30

TOTAL OF CONCRETE WORKS 10877374.65

3/29

Estimate-


ITEMS

QUANTITY


S.No.DSR -


RATE

(Rs.)

AMOUNT (Rs.)

3.0 5.0 REINFORCED CEMENT CONCRETE

Form Work

3.1 5.9 Centring and shuttering including strutting, propping etc. and removal

of form for :

3.1.1 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete. Sqm 5903.00 196.45 1159644.35

5.9.2 Walls (any thickness) including attached pilasters, buttresses, plinth

and string courses etc.Sqm 2572.80 360.80 928266.24

3.1.2 5.9.3 Suspended floors, roofs, landings, balconies and access platform.Sqm 25263.58 401.65 10147116.91

3.1.3 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers.Sqm 26501.62 332.15 8802513.08

3.1.4 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts. Sqm 17512.16 453.35 7939137.74

REINFORCED CEMENT CONCRETE

3.2 5.22 Steel Reinforcement for R.C.C. work, including straightening, cutting,

bending, placing in position and binding all complete up to plinth and

above plinth level.

3.2.1 5.22.6 Thermo-mechanically treated bars KG 1319925.00 68.10 89886892.50

3.3 5.33 Providing and laying in position machine batched and machine mixed

design mix M-25 grade cement concrete for reinforced cement

concrete work, using cement content as per approved design mix,

including pumping of concrete to site of laying but excluding the cost of

centering, shuttering, finishing and reinforcement, including admixtures

in recommended proportions as per IS: 9103 to accelerate, retard

setting of concrete, improve workability without impairing strength and

durability as per direction of Engineer-in-charge.

(Note :- Cement content considered in this item is @ 330 kg/cum.

Excess/ less cement used as per design mix is

payable/recoverable separately).

3.3.1 5.33.1 All works up to plinth level. Cum 3252.00 6296.15 20475079.80

3.3.2 5.33.2 All works up to floor V level. Cum 7257.00 7014.55 50904589.35

TOTAL OF REINFORCED CEMENT CONCRETE WORKS 190243239.974/29

Estimate-


ITEMS

QUANTITY


S.No.DSR -


RATE

(Rs.)

AMOUNT (Rs.)

MASONRY WORK

4.1 6.34 Brick work with non modular fly ash bricks conforming to IS:12894,

class designation 10 average compressive strength in super structure

above plinth level up to floor V level in :

4.1.1 6.34.2 Cement mortar 1:6 (1 cement : 6 Coarse sand). Cum 5308.00 6006.20 31880909.60

4.2 6.4 Brick work with non modular fly ash bricks conforming to IS:12894,

class designation 10 average compressive strength in super structure

above plinth level up to floor V level in :

4.2.1 6.4.2 Cement mortar 1:6 (1 cement: 6 coarse sand) Cum 213.00 6006.20 1279320.60

4.3 6.12 Half brick masonry with common burnt clay F.P.S. (non modular) bricks

of class designation 7.5 in foundations and plinth in

4.3.1 6.12.2 cement mortar 1:4 (1 cement : 4 coarse sand) Sqm 836.00 751.10 627919.60

4.4 6.45 Half brick masonry with non modular fly ash bricks of class designation

10, conforming to IS : 12894, in super structure above plinth and upto

floor V level.

4.4.1 6.45.2 Cement mortar 1 : 4 (1 cement : 4 coarse sand) Sqm 12651.00 751.10 9502166.10

4.5 6.15 Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at

every third course of half brick masonry. Sqm 13487.00 69.50 937346.50

TOTAL OF MASONRY WORKS 44227662.40

STONE WORKS

5.1 MR Random rubble masonry with hard stone in foundation and plinth

including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse

sand : 12 graded stone aggregate 20 mm nominal size) upto plinth

level with Cement mortar 1:6 (1 cement : 6 coarse sand)inclusive of

labour cutting and dressing of stone. (The Stone boulders shall be

issued free of cost at site)

Cum 2178.60 2930.89 6385228

5/29

Estimate-


ITEMS

QUANTITY


S.No.DSR -


RATE

(Rs.)

AMOUNT (Rs.)

5.2 MR Random rubble masonry with hard stone in superstructure above

plinth level and upto floor five level including levelling up with cement

concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone

aggregate 20 mm nominal size) above plinth level with Cement mortar

1:6 (1 cement : 6 coarse sand)inclusive of labour cutting and dressing

of stone(The Stone boulders shall be issued free of cost at site). (The

Stone boulders shall be issued free of cost at site)

Cum 1157.00 3513.82 4065492

Total of Stone Works 10450720.02

MARBLE AND GRANITE WORKS

6.1 MR Providing and fixing 18 mm thick gang saw cut, mirror polished,

premoulded and prepolished, machine cut for kitchen platforms, vanity

counters, window sills , facias and similar locations of required size,

approved shade, colour and texture laid over 20 mm thick base

cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white

cement, mixed with matching pigment, epoxy touch ups, including

rubbing, curing, moulding and polishing to edges to give high gloss

finish etc. complete at all levels.

6.1.1 MADANAPALLI Granite Stone of any colour and shade

6.1.1.1 Area of slab over 0.50 sqm Sqm 413.00 2200.00 908600

6.2 8.3 Providing edge moulding to 18 mm thick marble stone counters,

Vanities etc., including machine polishing to edge to give high gloss

finish etc. complete as per design approved by Engineer-in-Charge.

6.2.1 8.3.2 Granite work Metre 494.00 230.55 113891.70

6.3 8.4 Extra for fixing marble / granite stone, over and above corresponding

basic item, in facia and drops of width upto 150 mm with epoxy resin

based adhesive, including cleaning etc. complete Metre 494.00 247.40 122215.60

6/29

Estimate-


ITEMS

QUANTITY


S.No.DSR -


RATE

(Rs.)

AMOUNT (Rs.)

6.4 8.5 Extra for providing opening of required size & shape for wash basin/

kitchen sink in kitchen platform, vanity counter and similar location in

marble/ Granite/stone work, including necessary holes for pillar taps

etc. including moulding, rubbing and polishing of cut edges etc.

complete

Each 153.00 386.60 59149.80

6.5 8.9 Stone tile (polished) work for wall lining over 12 mm thick bed of

cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3

kg/sqm including pointing in white cement complete.

6.5.1 8.9.1.2 Granite of any colour and shade Sqm 1485.00 1921.85 2853947.25

TOTAL OF MARBLE AND GRANITE WORKS 3149204.35 908600.00

WOOD AND PVC WORK

7.1 MR Providing wood work in frames of doors, windows, clerestory windows

and other frames, wrought framed and fixed in position with hold fast

lugs or with dash fasteners of required dia & length ( hold fast lugs or

dash fastener shall be paid for separately). African Medium 2nd class

Teak wood

Cum 105.75 79727.00 8431130

7.2 9.9 Providing and fixing glazed shutters for doors, windows and clerestory

windows using 4 mm thick float glass panes, including ISI marked M.S.

pressed butt hinges bright finished of required size with necessary

screws

7.2.1 9.9.1 Second class teak wood

7.2.1.1 9.9.1.2 30 mm thick shutters Sqm 1881.00 2939.75 5529669.75

7.3 9.20 Providing and fixing ISI marked flush door shutters conforming to IS:

2202 (Part I) decorative type, core of block board construction with

frame of 1st class hard wood and well matched teak 3 ply veneering

with vertical grains or cross bands and face veneers on both faces of

shutters

7.3.1 9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with

necessary screws.Sqm 2803.00 2606.45 7305879.35

7/29

Estimate-


ITEMS

QUANTITY


S.No.DSR -


RATE

(Rs.)

AMOUNT (Rs.)

7.3.2 9.20.2 30 mm thick including ISI marked Stainless Steel butt hinges with

necessary screws. Sqm 641.00 2374.15 1521830.15

7.4 9.23 Extra for providing lipping with 2nd class teak wood battens 25 mm

minimum depth on all edges of flush door shutters (over all area of

door shutter to be measured).

Sqm 3444.00 365.85 1259987.40

7.5 9.47 Providing and fixing nickel plated M.S. pipe curtain rods with nickel

plated brackets.

7.5.1 9.47.2 25 mm dia (heavy type) metre 2015.00 138.20 278473.00

7.6 9.48 Providing and fixing M.S. grills of required pattern in frames of windows

etc. with M.S. flats, square or round bars etc. including priming coat

with approved steel primer all complete.

7.6.1 9.48.1 Fixed to steel windows by welding KG 28677.00 109.00 3125793.00

7.7 9.69 Providing and fixing oxidised M.S. Safety chain with necessary fixtures

for doors, (weighting not less than 450 gms) Each 156.00 78.00 12168.00

7.8 9.76 Providing and fixing bright finished brass 100 mm mortice latch and

lock with 6 levers and a pair of lever handles of approved quality with

necessary screws etc. complete.

Each 1404.00 546.40 767145.60

7.9 9.77 Providing and fixing bright finished brass 100 mm mortice latch with

one dead bolt and a pair of lever handles of approved quality with

necessary screws etc. complete

Each 429.00 476.70 204504.30

7.10 9.83 Providing and fixing aluminium die cast body tubular type universal

hydraulic door closer (having brand logo with ISI, IS : 3564, embossed

on the body, door weight upto 35 kg and door width upto 700 mm),

with necessary accessories and screws etc. complete.

Each 2.00 753.75 1507.50

8/29

Estimate-


ITEMS

QUANTITY


S.No.DSR -


RATE

(Rs.)

AMOUNT (Rs.)

7.11 9.84 Providing and fixing aluminium extruded section body tubular type

universal hydraulic door closer (having brand logo with ISI, IS : 3564,

embossed on the body, door weight upto 36 kg to 80 kg and door width

from 701 mm to 1000 mm), with double speed adjustment with

necessary accessories and screws etc. complete.

Each 4.00 1043.60 4174.40

7.12 9.90 Providing and fixing special quality chromium plated brass cupboard

locks with six levers of approved quality including necessary screws

etc.

complete.

7.12.1 9.90.1 Size 40 mm Each 252.00 174.70 44024.40

7.13 9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised

(anodic coating not less than grade AC 10 as per IS : 1868 )

transparent or dyed to required colour or shade, with necessary screws

etc. complete

7.13.1 9.97.1 300 x10 mm Each 4544.00 112.10 509382.40

7.13.2 9.97.4 150 x 10 mm Each 5560.00 65.35 363346.00

7.13.3 9.97.5 100 x 10 mm Each 272.00 52.35 14239.20

7.14 9.100 Providing and fixing aluminium handles, ISI marked, anodised (anodic

coating not less than grade AC 10 as per IS : 1868) transparent or

dyed to required colour or shade, with necessary screws etc. complete

:

7.14.1 9.100.2 100 mm Each 5560.00 55.10 306356.00

7.15 9.101 Providing and fixing aluminium hanging floor door stopper, ISI marked,

anodised (anodic coating not less than grade AC 10 as per IS : 1868)

transparent or dyed to required colour and shade, with necessary

screws etc. complete.

7.15.1 9.101.1 Single rubber stopper Each 2440.00 37.50 91500.00

7.16 9.114 Providing and fixing magnetic catcher of approved quality in cupboard /

ward robe shutters, including fixing with necessary screws etc.

complete.

7.16.1 9.114.1 Triple strip vertical type Each 432.00 28.60 12355.209/29

Estimate-


ITEMS

QUANTITY


S.No.DSR -


RATE

(Rs.)

AMOUNT (Rs.)

7.17 9.127 Providing & Fixing decorative high pressure laminated sheet of plain /

wood grain in gloss / matt / suede finish with high density protective

surface layer and reverse side of adhesive bonding quality conforming

to IS : 2046 Type S, including cost of adhesive of approved quality.

7.17.1 9.127.2 1.0 mm thick Sqm 1200.00 676.40 811680.00

7.18 9.129 Providing and fixing cup board shutters 25 mm thick, with Pre-

laminated flat pressed three layer particle board or graded wood

particle board IS: 12823 marked, exterior grade (Grade l Type ll),

having one side decorative lamination and other side balancing

lamination, including IInd class teak wood lipping of 25 mm wide x12

mm thick with necessary screws and bright finished stainless steel

piano hinges, complete as per direction of the Engineer-in-Charge.

Sqm 4.00 1629.75 6519.00

7.19 9.130 Providing and fixing cup board shutters with 25 mm thick veneered

particle board IS : 3097 marked, exterior grade (Grade I), of approved

make, including IInd class teak wood lipping of 25 mm wide x 12 mm

thick with necessary screws and bright finished stainless steel piano

hinges, complete as per direction of Engineer-in-Charge.

7.19.1 9.130.1 With decorative veneering on one side and commercial veneering on

other side.Sqm 306.00 1409.05 431169.30

10/29

Estimate-


ITEMS

QUANTITY


S.No.DSR -


RATE

(Rs.)

AMOUNT (Rs.)

7.20 9.133 Providing and fixing, in position concealed G.I. section for wall paneling

using board of required thickness fixed on the „W‟ profile (0.55 mm

thick) having a knurled web of 51.55 mm and two flanges of 26 mm

each with lips of 10.55 mm, placed @ 610 mm C/C in perimeter

channel having one flange of 20 mm and another flange of 30 mm with

thickness of 0.55 mm and web of length 27 mm. Perimeter channel is

fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C

with fully threaded selftapping dry wall screws. Board is fixed to the „W‟

profile with 25 mm countersunk ribbed head screws @ 200 mm C/C.,

all complete as per the drawing & directions of engineer-in-charge, the

joints of the boards are finished with specially formulated jointing

compound and 48 mm wide jointing tape to provide seamless finish.

7.20.1 9.133.1 Tapered edge calcium silicate board made with calcareous & siliceous

materials reinforced with cellulose fiber manufactured through

autoclaving process to give stable crystalline structure with

compressive strength 225 kg/ sq.cm, Bending strength 100 kg/sq.cm.

7.20.1.1 9.133.1.1 10mm thick Sqm 177.00 1002.15 177380.55

7.21 9.135 Providing and fixing fly proof stainless steel grade 304 wire gauge, to

windows and clerestory windows using wire gauge with average width

of

aperture 1.4 mm in both directions with wire of dia. 0.50 mm all

complete.

7.21.1 9.135.1 With 2nd class teak wood beading 62X19 mm Sqm 3280.00 1600.95 5251116.00

7.21.2 9.135.2 With 12 mm aluminum U beading Sqm 224.00 1317.55 295131.20

7.22 9.130 Providing and fixing cup board shutters with 25 mm thick veneered

particle board IS : 3097 marked, exterior grade (Grade I), of approved

make, including IInd class teak wood lipping of 25 mm wide x 12 mm

thick with necessary screws and bright finished stainless steel piano

hinges, complete as per direction of Engineer-in-Charge.

7.22.1 9.130.1 With decorative veneering on one side and commercial veneering on

other side.Sqm 199.00 1409.05 280400.95

9.135.1 With 2nd class teak wood beading 62X19 mm Sqm 2.00 1600.95 3201.90

11/29

Estimate-


ITEMS

QUANTITY


S.No.DSR -


RATE

(Rs.)

AMOUNT (Rs.)

7.23 MR Providing and fixing Stainless steel modular kitchen with chimney as

per achitectural drawings and as instructed by Engineer-in-charge. Sqm 632.20 8000.00 5057600

TOTAL OF WOOD AND PVC WORKS 28608934.55 13488730.25

STEEL WORKS

8.1 10.2 Structural steel work riveted, bolted or welded in built up sections,

trusses and framed work, including cutting, hoisting, fixing in position

and applying a priming coat of approved steel primer all complete.1569.00 73.95 116027.55

8.2 10.5 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6

mm angle iron and 3 mm M.S. gusset plates at the junctions and

corners, all necessary fittings complete, including applying a priming

coat of approved steel primer.

8.2.1 10.5.2 Using flats 30x6mm for diagonal braces and central cross piece. Sqm 1307.10 2906.65 3799282.22

10.14 Providing and fixing pressed steel door frames conforming to IS: 4351,

manufactured from commercial mild steel sheet of 1.60 mm thickness,

including hinges, jamb, lock jamb, bead and if required angle threshold

of mild steel angle of section 50x25 mm, or base ties of 1.60 mm,

pressed mild steel welded or rigidly fixed together by mechanical

means, including M.S. pressed butt hinges 2.5 mm thick with mortar

guards, lock strikeplate and shock absorbers as specified and applying

a coat of approved steel primer after pre-treatment of the surface as

directed by Engineerin-charge:

10.14.3 Profile E

10.14.3.1 Fixing with adjustable lugs with split end tail to each jamb Metre 33.00 424.20 13998.60

8.3 10.25 Steel work welded in built up sections/ framed work, including cutting,

hoisting, fixing in position and applying a priming coat of approved

steel primer using structural steel etc. as required.

8.3.1 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and

similar works Sqm 2092.00 90.10 188489.20

12/29

Estimate-


ITEMS

QUANTITY


S.No.DSR -


RATE

(Rs.)

AMOUNT (Rs.)

8.4 10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow

tubes, channels, plates etc., including welding, grinding, buffing,

polishing and making curvature (wherever required) and fitting the

same with necessary stainless steel nuts and bolts complete, i/c fixing

the railing with necessary accessories & stainless steel dash fasteners

, stainless steel bolts etc., of required size, on the top of the floor or the

side of waist slab with suitable arrangement as per approval of

Engineer-in-charge, (for payment purpose only weight of stainless steel

members shall be considered excluding fixing accessories such as

nuts, bolts, fastenersetc.).

KG 12283.00 619.40 7608090.20

TOTAL OF STEEL WORKS 11609860.22

FLOORING WORKS

9.1 MR Providing and laying polished Granite stone (MADANAPALLI) flooring,

skirting, risers, treads etc. in required design and patterns, in linear as

well as curvilinear portions etc. complete as per the architectural

drawings with 18mm thick stone slab over 20 mm (average) thick base

of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with

cement slurry and pointing with white cement slurry admixed with

pigment of matching shade including rubbing, curing and polishing etc.

all complete as specified and as directed by the Engineer- in-Charge.

sqm 11102.00 1367.00 15176434.00

9.2 11.4 52 mm thick cement concrete flooring with concrete hardener topping,

under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse

sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12

mm thick cement hardener consisting of mix 1:2 (1 cement hardener

mix : 2 graded stone aggregate 6 mm nominal size) by volume,

hardening compound mixed @ 2 litre per 50 kg of cement or as per

manufacturer‟s specifications. This includes cost of cement slurry, but

excluding the cost of nosing of steps etc. complete.

Sqm 225.00 535.25 120431.25

13/29

Estimate-


ITEMS

QUANTITY


S.No.DSR -


RATE

(Rs.)

AMOUNT (Rs.)

9.3 11.20 Chequerred precast cement concrete tiles 22 mm thick in footpath &

courtyard, jointed with neat cement slurry mixed with pigment to match

the shade of tiles, including rubbing and cleaning etc. complete, on 20

mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).

9.3.1 11.20.4 Ordinary cement without any pigment Sqm 225.00 658.15 148083.75

9.4 11.24 Extra for pre finished nosing to treads of steps of marble stone. sqm 404.00 274.90 111059.60

9.5 11.25 Extra for marble / granite stone flooring in treads of steps and risers

using single length up to 2.00 metre. sqm 593.00 320.30 189937.90

9.6 Analyse

d on

DSR-

2014

Providing and laying polished Granite stone (MADANAPALLI) flooring,








9.6.1 11.26.1 sqm 512.00 1367.00 699904.00

.

9.7 11.36 Providing and fixing Ist quality ceramic glazed wall tiles conforming to

IS : 15622 (thickness to be specified by the manufacture ) of approved

make in all colours, shades except burgundy, bottle green, black of any

size as approved by The Architect in skirting, risers of steps and dados

over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand)

and jointing with grey cement slurry @ 3.3kg per sqm including

pointing in white cement mixed with pigment of matching shade

complete.

Sqm 6086.00 836.65 5091851.90

14/29

Estimate-


ITEMS

QUANTITY


S.No.DSR -


RATE

(Rs.)

AMOUNT (Rs.)

9.8 11.38 Providing and laying Ceramic glazed floor tiles of size 300x300 mm

(thickness to be specified by the manufacturer), of 1st quality

conforming to IS : 15622, of approved make, in all colours, shades,

except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed

of cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing

the joints with white cement and matching pigments etc., complete

sqm 1213.00 904.45 1097097.85

9.9 11.40 Providing and laying rectified Glazed Ceramic floor tiles of size

300x300 mm or more (thickness to be specified by the manufacturer),

of 1st quality conforming to IS : 15622, of approved make, in all

colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on

20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), including

pointing the joints with white cement and matching pigments etc.,

complete.

sqm 2403.00 1009.60 2426068.80

9.1 11.41 Providing and laying vitrified floor tiles in different sizes (thickness to

be specified by the manufacturer) with water absorption less than

0.08% and conforming to IS : 15622, of approved make, in all colours

and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4

coarse sand), including grouting the joints with white cement and

matching pigments etc., complete.

9.10.1 11.41.2 Size of Tile 600x600mm. Sqm 6467.00 1405.95 9092278.65

9.11 11.46 Providing and laying Vitrified tiles in different sizes (thickness to be

specified by manufacturer), with water absorption less than 0.08 % and

conforming to I.S. 15622, of approved make, in all colours & shade, in

skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1

cement: 3 coarse sand), including grouting the joint with white cement

& matching pigments etc. complete.

9.11.1 11.46.2 Size of Tile 600x600mm. Sqm 730.00 1415.40 1033242.00

15/29

Estimate-


ITEMS

QUANTITY


S.No.DSR -


RATE

(Rs.)

AMOUNT (Rs.)

9.1 16.68 Providing and laying 60mm thick factory made cement concrete

interlocking paver block of M -30 grade made by block making

machine with strong vibratory compaction and of approved size and

design/ shape laid in required colour and pattern over and including

50mm thick compacted bed of course sand, filling the joints with

coarse sand etc. all complete as per the direction of Engineer-

incharge.

Sqm 254.00 536.65 136309.10

9.13 Analyse

d on

DSR-

2014

Providing and laying polished Granite stone (MADANAPALLI) flooring,








sqm 94.00 1367.00 128498.00

TOTAL OF FLOORING WORKS 20274762.80 15176434.00

ROOFING WORKS

10.1 12.21 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 stone aggregate 10mm and down gauge) including

finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per

standard design :

10.1.1 12.21.1 In 75x75mm deep chase Metre 2933.00 143.10 419712.30

10.2 12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400

micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse

sand) and a coat of neat cement, rounding the edges and making and

finishing the outlet complete.

Each 166.00 186.65 30983.90

16/29

Estimate-


ITEMS

QUANTITY


S.No.DSR -


RATE

(Rs.)

AMOUNT (Rs.)

10.3 12.45 Providing and fixing at all height false ceiling including providing and

fixing of frame work made of special sections power pressed from M.S.

sheet and galvanised in accordance with zinc coating of grade 350 as

per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm

thick with flanges of 22mm and 37mm at 1200mm centre to centre one

flange fixed to the ceiling with dash fastener 12.5mm diax40mm long

with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required

length, and other end of angle hanger being fixed with nut and bolts to

G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to

centre to which the ceiling section 0.5mm thick button wedge of 80mm

with tapered flanges of 26mm each having clips of 10.5mm at 450mm

centre to centre shall be fixed in a direction perpendicular to G.I.

channel with connecting clips made out of 2.64mm diax230mm long

G.I. wire at every junction including fixing the gypsum board with

ceiling section and perimeter channels 0.5mm thick 27mm high having

flanges of 20mm and 30mm long, the perimeter of ceiling fixed to

wall/partition with the help of rawl plugs at 450mm centre to centre with

25mm long drive-all screws @ 230mm interval including jointing and

fixing to a flush finish of tapered and square edges of the board with

recommended filler, jointing tapes, finisher and two coats of primer

suitable for board as per manufactures specification and also including

the cost of making openings for light fittings, grills, diffusers, cutouts

made with frame of perimeter channels suitably fixed all complete as

per drawing and specification and direction of the Engineer in Charge

but excluding the cost of painting with :

10.3.1 12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS:

2095- Part Isqm 315.00 907.10 285736.50

17/29

Estimate-


ITEMS

QUANTITY


S.No.DSR -


RATE

(Rs.)

AMOUNT (Rs.)

10.4 12.50 Providing and fixing precoated galvanised iron profile sheets (size,

shape and pitch of corrugation as approved by Engineer-in-charge)

0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams

per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy

primer on both side of the sheet and polyester top coat 15-18 microns.

Sheet should have protective guard film of 25 microns minimum to

avoid scratches during transportation and should be supplied in single

length upto 12 metre or as desired by Engineerin-charge. The sheet

shall be fixed using self drilling / self tapping screws of size (5.5x 55

mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or

curved surfaces, excluding the cost of purlins, rafters and trusses and

including cutting to size and shape wherever required.

sqm 64.00 622.00 39808.00

10.5 12.51 Providing and fixing precoated galvanised steel sheet roofing

accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating

120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7

microns epoxy primer on both side of the sheet and polyester top coat

15-18 microns using self drilling/ self tapping screws complete

10.5.1 12.51.1 Flashings/ Aprons.( Upto 600 mm ) Metre 40.00 633.90 25356.00

10.5.2 12.51.6 Gutter (600 mm over all girth) Metre 16.00 622.00 9952.00

18/29

Estimate-


ITEMS

QUANTITY


S.No.DSR -


RATE

(Rs.)

AMOUNT (Rs.)

10.6 12.52 Providing and fixing tiled false ceiling of approved materials of size

595x595 mm in true horizontal level, suspended on inter locking metal

grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/

sqm, both side inclusive) consisting of main “T” runner with suitably

spaced joints to get required length and of size 24x38 mm made from

0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center

and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum)

sheet, 1200 mm long spaced between main “T” at 600 mm center to

center to form a grid of 1200x600 mm and secondary cross “T” of

length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum)

sheet to be interlocked at middle of the 1200x600 mm panel to form

grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying

false ceiling tiles of approved texture in the grid including, required

cutting/making, opening for services like diffusers, grills, light fittings,

fixtures, smoke detectors etc. Main “T” runners to be suspended from

ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to

ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI

adjustable rods with galvanised butterfly level clips of size 85 x 30 x

0.8 mm spaced at 1200 mm center to center along main T, bottom

exposed width of 24 mm of all T-sections shall be pre-painted with

polyester

paint, all complete for all heights as per specifications, drawings and as

directed by Engineer-in-charge.

10.6.1 12.52.4 12.5 mm thick fully Perforated Gypsum Board tile made from

plasterboard having glass fibre conforming to IS: 2095 part I, of size

595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with

center borders of 48 mm and the side borders of 30 mm, backed with

non woven tissue on the back side, having an NRC ( Noise Reduction

Coefficient) of 0.79, with 50 mm resin bonded glass wool backing.

Sqm 63.00 1155.20 72777.60

10.7 12.57 Providing and fixing thermal insulation with Resin Bonded Fibre glass

wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick,

wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawel

plug & washers and held in position by criss crossing GI wire etc.

complete as per directions of Engineer-in-Charge.

Sqm 177.00 319.90 56622.30

19/29

Estimate-


ITEMS

QUANTITY


S.No.DSR -


RATE

(Rs.)

AMOUNT (Rs.)

450696.20

FINISHING WORK

11.1 13.4 12 mm cement plaster of mix :

11.1.1 13.4.2 1:6 (1 cement: 6 coarse sand) Sqm 46701.00 158.40 7397438.40

11.2 13.4 12 mm cement plaster of mix : (Ceiling)


11.3 13.5 15 mm cement plaster on rough side of single or half brick wall of mix :


13.12 18 mm cement plaster in two coats under layer 12 mm thick cement

plaster 1:5 (1 cement: 5 coarse sand) and a top layer 6 mm thick

cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with

sponge.

Sqm 140.00 228.90 32046

11.4 13.33 Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine

sand):

11.4.1 13.33.2 Raised and cut pointing Sqm 3316.00 276.70 917537.20

11.5 13.46 Finishing walls with Acrylic Smooth exterior paint of required shade

11.5.1 13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and

including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm Sqm 33992.30 90.00 3059307.00

11.6 13.41 Distempering with oil bound washable distemper of approved brand

and manufacture to give an even shade

11.6.1 13.41.1 New work (two or more coats) over and including water tinna- ble

priming coat with cement primer sqm 694.00 89.70 62251.80

11.7 13.60 Wall painting with acrylic emulsion paint of approved brand and

manufacture to give an even shade

11.7.1 13.60.1 Two or more coats on new work sqm 64632.00 80.50 5202876.00

TOTAL OF ROOFING WORKS

20/29

Estimate-


ITEMS

QUANTITY


S.No.DSR -


RATE

(Rs.)

AMOUNT (Rs.)

11.8 13.61 Painting with synthetic enamel paint of approved brand and

manufacture to give an even shade

11.8.1 13.61.1 Two or more coats on new work sqm 10919.00 74.40 812373.60

11.9 13.69 Polishing on wood work with ready mixed wax polish of approved

brand and manufacture :

11.9.1 13.69.1 New work sqm 751.00 85.15 63947.65

11.10 13.80 Providing and applying white cement based putty of average thickness

1 mm, of approved brand and manufacturer, over the plastered wall

surface to prepare the surface even and smooth complete.Sqm 65160.00 89.65 5841594.00

11.11 MR Providing and laying cornices and moulding with P.O.P as per drawing.Mtr 8831.00 131.00 1156861.00

TOTAL OF FINISHING WORKS 32885618.00 1156861.00

ROAD WORK (Fencing)

12.1 16.53 Providing and fixing concertina coil fencing with required dia 610 mm

(having 15 Nos. round per 6 metre length) upto 3m height of wall with

existing angle iron "Y" shaped placed 2.4 m or 3.00 m apartand with 9

horizontal R.B.T stud tied with G.I. staples and G.I. clips to retain

horizontal including necessary bolts or G.I. barbed wire tied to angle

iron all complete as per direction of Engineer-in-charge with reinforced

barbed tape (R.B.T.) / Spring core (2.5mm thick) wire of high tensile

strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight

43.478gm/metre (cost of M.S. angle, C.C. block shall be paid

separately)

12.1.1 Metre 20670.00 287.05 5933323.50

12.2 16.19 Supplying at site Angle iron post & strut of required size including

bottom to be split and bent at right angle in opposite direction for 10

cm length and drilling holes upto 10 mm dia. etc. complete. KG 5501.00 70.90 390020.90

ROAD AND PATH WORKS

21/29

Estimate-


ITEMS

QUANTITY


S.No.DSR -


RATE

(Rs.)

AMOUNT (Rs.)

13.1 16.1 Preparation and consolidation of sub grade with power road roller of 8

to 12 tonne capacity after excavating earth to an average of 22.5 cm.

depth, dressing to camber and consolidating with road roller including

making good the undulations etc. and re-rolling the sub grade and

disposal of surplus earth lead upto 50 metres.

Sqm 17127.00 81.29 1392253.83

13.1.1 2.6 Earthwork excavation in over areas in all kinds of soils cum 600.00 155.60 93360.00

13.2 16.3 Supplying and stacking at site.

13.2.1 16.3.2 63 mm to 45 mm size stone aggregate. (Free issue of material) Cum 1028.00 134.40 138163.20

13.3 16.3.7 Stone screening 11.2 mm nominal size (Type B) Cum 1028.00 1471.00 1512188.00

13.3.1 16.3.10 Moorum. Cum 3230.00 646.35 2087710.50

13.4 16.4 Laying, spreading and compacting stone aggregate of specified sizes

to WBM specifications including spreading in uniform thickness, hand

picking , rolling with 3 wheeled road / vibratory roller 8-10 tonne in

stages to proper grade and camber, applying and brooming requisite

type of screening / binding material to fillup interstices of coarse

aggregate watering and compacting to the required density.

Cum 3393.00 425.05 1442194.65

13.5 16.30 Providing and applying tack coat using hot straight run bitumen of

grade VG - 10, including heating the bitumen, spraying the bitumen

with mechanically operated spray unit fitted on bitumen boiler,

cleaning and preparing the existing road surface as per specifications :

13.5.1 16.30.2 On bituminous surface @ 0.50 Kg / sqm Sqm 16966.00 53.75 911922.50

22/29

Estimate-


ITEMS

QUANTITY


S.No.DSR -


RATE

(Rs.)

AMOUNT (Rs.)

13.6 16.36 Providing and laying Bitumen Penetration Macadam with hard stone

aggregate of quality, size and grading as specified, with bitumen of

suitable penetration grade, including required key aggregate as

specified, spreading coarse aggregate with the help of self propelled/

tipper tail mounted aggregate spreader and applying bitumen by a

pressure distributor and then spreading key aggregate with the help of

aggregate spreader complete, including consolidation with road roller

of minimum 8 to 10 tonne capacity to achieve specified values of

compaction and surface accuracy

13.6.1 16.36.1 For 50mm compacted thickness using coarse aggregate of size 50-20

mm graded @ 0.60 cum per 10 sqm key aggregate of size 12.5 mm

graded @ 0.15 cum per 10 sqm. With paving asphalt grade VG - 10 @

50 kg/ 10 sqm.

Sqm 16966.00 455.85 7733951.10

13.7 16.38 2.5 cm thick bitumastic sheet with hot bitumen of approved quality,

using stone chippings (60% with 12.5 mm nominal size and 40% with

10 mm nominal size) @ 1.65 cum per 100 sqm and coarse sand @

1.65 cum per 100 sqm of road surface and with bitumen @ 56 kg/cum

of stone chippings and @ 128 kg/cum of sand over a tack coat with

hot straight run bitumen, including consolidation with road roller of 8 to

10 tonne etc. complete. (tack coat to be paid separately) :

13.7.1 16.38.1 With paving Asphalt grade VG - 10 Sqm 8483.00 289.60 2456676.80

13.8 13.61 Painting FOR KERB/RRM WALL with synthtic enamel paint

13.8.1 New work (Two or more coats Sqm 4631.00 74.40 344546.40

16.63 Random rubble masonry with hard stone in foundation

and plinth including levelling up with cement

concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded

stone aggregate 20 mm nominal size) upto plinth CUM854.29

2930.92503838.56

16.68level with Cement mortar 1:6 (1 cement : 6 coarse sand)inclusive of labour

cutting and

13.9

23/29

Estimate-


ITEMS

QUANTITY


S.No.DSR -


RATE

(Rs.)

AMOUNT (Rs.)

13.10 16.52 Providing and fixing precast lime fly ash concrete blocks 1:2:3:6 (1

lime: 2fly ash : 3 coarse sand : 6 graded stone aggregate 20 mm

nominal size),including sand) in foot paths, including preparation of sub

grade with a hand rammer,finishing with 10mm thick cement mortar

1:3 (1 cement : 3 coarselaying 10 mm thick leveling course of fine sand

(jamuna SAND)

Cum 120.00 6537.00 784440.00

13.11 16.93 Providing and placing in position 100mm thick factory made machine

batched & machine mixed Precast RCC Rectangular Covers on drains

of footpath of various sizes,of M-25 grade cement concrete for RCC

work, including cost of centering, shuttering, reinforcement of 8mm

dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways ,

neat cement punning on finished surface, properly encased on all

edges with 1.6 mm thick , 100mm wide MS sheet duly painted over

priming coat , reinforcement to be welded at edges with MS sheet

and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage

,all leads & lift, handling at site etc. all complete as per direction of

Engineer-in-Charge

Sqm 1323.00 2090.30 2765466.90

TOTAL OF ROAD WORKS 30490056.84

14 ALUMINIUM WORK

24/29

Estimate-


ITEMS

QUANTITY


S.No.DSR -


RATE

(Rs.)

AMOUNT (Rs.)

14.1 21.1 Providing and fixing aluminium work for doors, windows, ventilators

and partitions with extruded built up standard tubular sections/

appropriate Z section and other section of approved make conforming

to IS: 733 and IS: 1285, fixed with rawl plugs and screws or with fixing

clips, or with expansion hold fasteners including necessary filling up of

gaps at junctions at top, bottom and sides with required PVC/neoprene

felt etc. Aluminium section shall be smooth, rust free, straight, mitred

and jointed mechanically wherever required including cleat angle,

Aluminium snap beading for glazing /panelling , C.P. brass/stainless

steel screws, all complete as per architectural drawings and the

direction of Engineer-in-charge. (Glazing and panelling to be paid for

separately).

14.1.1 21.1.1 For fixed portion

14.1.1.1 21.1.1.1 Anodised aluminium (anodised transparent or dyed to required shade

according to IS: 1868, Minimum anodic coating of grade AC 15) Kg 3738.00 348.50 1302693.00

14.2 21.1.2 For shutters of doors, windows & ventilators including providing and fixing

hinges/ pivots and making provision for fixing of fitting wherever required

including the cost of PVC/neoprene gasket required (Fittings shall be paid

for separately)

14.2.1 21.1.2.1 Anodised aluminium (anodised transparent or dyed to required shade

according to IS: 1868, Minimum anodic coating of grade AC 15) Kg 8724.00 405.90 3541071.60

14.3 21.3 Providing and fixing glazing in aluminium door, window, ventilator

shutters and partitions etc. with PVC / neoprene gasket etc. complete

as per the architectural drawings of engineer-in-charge. (Cost of

aluminium snap beading shall be paid in basic item)

14.3.1 21.3.2 With float glass panes of 5.5 mm thickness Sqm 622.00 1054.20 655712.40

14.4 21.8 Filling the gap in between aluminium frame & adjacent RCC/ Brick/

Stone work by providing weather silicon sealant over backer rod of

approved quality as per architectural drawings and direction of

Engineer-in-charge complete.

25/29

Estimate-


ITEMS

QUANTITY


S.No.DSR -


RATE

(Rs.)

AMOUNT (Rs.)

14.4.1 21.8.1 Upto 5mm depth and 5 mm width metre 1750.00 88.75 155312.50

14.5 21.13 Providing and fixing 100mm brass locks (best make of approved

quality) for aluminium doors including necessary cutting and making

good etc.

complete.

Each 1.00 418.65 418.65

14.6 21.16 Providing and fixing aluminium round shape handle of outer dia 100

mm with SS screws etc. complete as per direction of Engineerin-

charge.

14.6.1 21.16.1 Anodized (AC 15 ) aluminium Each 12.00 65.60 787.20

14.7 21.17 Providing and fixing anodised aluminium grill (anodised transparent or

dyed to required shade according to IS: 1868 with minimum anodic

coating of grade AC 15) of approved design/pattern, with approved

standard section and fixed to the existing window frame with C.P.

brass/ stainless steel screws @ 200 mm centre to centre, including

cutting the grill to proper opening size for fixing and operation of

handles and fixing approved anodised aluminium standard section

around the opening, all complete as per requirement and direction of

Engineer-in-charge. (Only weight of grill to be measured for payment).

KG 7585.00 403.35 3059409.75

14.8 9.97 P/F aluminium tower bolts ISI Marked anodised (anodic coating not

less then grade AC 10 as per IS :1868) transparent or dyed to required

colour or shade with necessary screw etc. complete.

14.8.1 9.97.3 200 x 10 mm Each 10.00 79.25 792.50

14.8.2 9.97.4 150 x 10 mm Each 403.00 65.35 26336.05

14.9 9.100 Providing and fixing aluminium handles, ISI marked, anodised (anodic

coating not less than grade AC 10 as per IS : 1868) transparent or

dyed to required colour or shade, with necessary screws etc. complete

:

14.9.1 9.100.2 100 mm Each 403.00 55.10 22205.30

TOTAL OF ALUMINIUM WORK 8764738.95

26/29

Estimate-


ITEMS

QUANTITY


S.No.DSR -


RATE

(Rs.)

AMOUNT (Rs.)

WATER PROOFING WORK

15.1 22.3 Providing and laying water proofing treatment to vertical and horizontal

surfaces of depressed portions of W.C., kitchen and the like consisting

of :

(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water

proofing compound conforming to IS 2645 in recommended

proportions including rounding off junction of vertical and horizontal

surface.

(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand)

mixed with water proofing compound in recommended proportion

including rounding off junction of vertical and horizontal surface.

(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7

kg. per sqm of area

(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC

sheet should be 100 mm wide and pasted to each other with bitumen

@ 1.7 kg/sqm).

Sqm 5063.00 522.90 2647442.70

27/29

Estimate-


ITEMS

QUANTITY


S.No.DSR -


RATE

(Rs.)

AMOUNT (Rs.)

15.2 22.7 Providing and laying integral cement based water proofing treatment

including preparation of surface as required for treatment of roofs,

balconies, terraces etc consisting of following operations: a) Applying a

slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with

water proofing compound conforming to IS. 2645 and approved by

Engineer-in-charge over the RCC slab including adjoining walls upto

300mm height including cleaning the surface before treatment. b)

Laying brick bats with mortar using broken bricks/brick bats 25 mm to

115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand)

admixed with water proofing compound conforming to IS : 2645 and

approved by Engineer-in-charge over 20 mm thick layer of cement

mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water

proofing compound conforming to IS : 2645 and approved by Engineer-

in-charge to required slope and treating similarly the adjoining walls

upto 300 mm height including rounding of junctions of walls and slabs

c) After two days of proper curing applying a second coat of cement

slurry using 2.75kg/ sqm of cement admixed with water proofing

compound conforming to IS : 2645 and approved by Engineer-in-

charge. d) Finishing the surface with 20 mm thick jointless cement

mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water

proofing compound conforming to IS : 2645 and approved by Engineer-

in-charge including laying glass fibre cloth of approved quality in top

layer of plaster and finally finishing the surface with trowel with neat

cement slurry and making pattern of 300x300 mm square 3mm deep.

e) The whole terrace so finished shall be flooded with water for a

minimum period of two weeks for curing and for final test. All above

operations to be done in order and as directed and specified by the

Engineer-in-Charge :

28/29

Estimate-


ITEMS

QUANTITY


S.No.DSR -


RATE

(Rs.)

AMOUNT (Rs.)

15.3 22.7.1 With average thickness of 120mm and minimum thickness at khurra as

65 mm.Sqm 9103.00 1019.05 9276412.15

14.4 MR Providing and filling cinder blocks including proper watering and

compaction in sunken areas all complete as per drawings and as

directed by the Engineer-in-charge

Cum 5.00 850.00 4250.00

TOTAL OF WATER PROOFING WORKS 11928104.85

29/29

DSR

Item

no.

Description Unit Rate (in Rs.) Total Qty Total Amount Total Amount

DSR N.DSR

(NS) Supplying & fixing 75mm x 75mm x 10 mm zinc

passivated box with mould cord outlet complete

with RJ 45 sockets as required for computer data

point.

450.00 64.00 28,800.00

(NS) Supplying & laying CAT 6 for LAN wiring in PVC

conduit / Cable Tray complete as required.

0

70.00 1700 1,19,000.00

(NS) Supplying and fixing of the following sheet steel

clad wall / recess mounting telephone tag blocks

of krone make constructed from 14 SWG sheet

steel finished with red oxide coating of two coats

of paint with hinged gasketted powder coated

door and complete.

0

a) 05 pairs Each 1000.00 8 8,000.00

0

b) 10 pairs Each 1500.00 8 12,000.00

0

c) 20 pairs Each 2500.00 8 20,000.00

d) 50 pairs Each 5000.00 3 15,000.00

0

(NS) Supplying of following type recessed / surface

mounted fluorescent light fixture complete with

electronic choke earthing point and with TL-5 /

CFL lamps complete as required. (HAVELLS /

BAJAJ / WIPRO)

0

0

a) 22W LED (4') Each 3100.00 415 12,86,500.00

b) 15W LED Downlighter

Each 3100.00 125 387500

c) 15W CFL Downlighter

Each 3100.00 200 620000d) 12 W LED (2')

Each 2150.00 5 10750

e) 18W LED (2')

Each 2150.00 25 53750f) 18W LED Batton (4')

Each 650.00 20 13000

0

g) 10W LED bulkhead Each 1900.00 102 193800

(NS) Supplying of 305 mm 1400 RPM exhaust fan

complete with louver and bird guard screen with 3

core flexible wire as required. 0

Each 2800.00 302 845600

Supplying of ceiling fan, complete with blades

with suitable length of down rods shackle

insulator earthing point including connection etc .

as required. 0

0

a) 1200 mm sweep Each 1600.00 773 1236800

(NS) AC 0

Each 39000.00 13 507000

(NS) Desert Cooler 0

Each 14000.00 90 1260000

(NS) Supplying, installation, testing and commissioning

of inteligent analouge photoelectric optical type

smoke detector and mounting base with LED light

complete as required.

0

3350.00 440 1474000


of inteligent analouge photoelectric optical type

heat detector and mounting base with LED light


0

3350.00 32 107200


of duel tone electronic hooter suitable for wall

mounted complete as required.

0

6310.00 37 233470


of manual call box in suitable enclosure with

arrangement to raise the alarm when the glass is

manually broken complete as required.

0

5720.00 38 217360

COMBINED BOQ for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P) BILL OF QUANTITY-ELECTRICAL - ITBP BASE CAMP

Page 1 of 8


of microprocessor based addressable main fire

alarm control panel of 4 zone capacity as

complete with batteries, battery charger

illuminated numeric digram complete as required.

0

125000.00 6 750000

(NS) Supplying, fixing and commissioning following

nos. ways audio luminious indicators with rest

buttons and buzzers mounted in concealed GI

sheet steel enclosure including interconnection

numbering etc. complete as required.

a 12 WAY Each 9000.00 1 9000

b 4 WAY Each 5500.00 1 5500

1.10

Wiring for light point/ fan point/ exhaust fan

point/ call bell point with 1.5 sq.mm FR PVC

insulated copper conductor single core cable in

surface / recessed medium class PVC conduit,

with modular switch, modular plate, suitable GI

box and earthing the point with 1.5 sq.mm. FR

PVC insulated copper conductor single core cable

etc as required.

1.10.1 Group A Point

518.00 704 3,64,672.00

Light

point

585.00 2124 12,42,540.00

Fan point

585.00 600 3,51,000.00

exhaust

point

585.00 385 2,25,225.00

(1.10.3) Wiring for light point / fan point /exhaust fan

point/ call bell point with 1.5 sq.mm FRLS PVC


surface / recessed medium class PVC Conduit,

with modular switch,modular plate ,suitable GI

Box and earthing the point with 1.5 sq.mm FRLS


etc. as required.

a) Group C

Point 718.00 1358 9,75,044.00

1.11

Wiring for twin control light point with 1.5 sq.mm

FR PVC insulated copper conductor single core

cable in surface / recessed medium class PVC

conduit, 2 way modular switch, modular plate,

suitable GI box and earthing the point with 1.5

sq.mm. FR PVC insulated copper conductor single

core cable etc as required.

Point 0.00

770.00 710 5,46,700.00

-1.12 Wiring for light /power plug with 2x4 sq.mm FRLS


in surface /recessed PVC conduit along with 1 No

4 sq.mm FRLS PVC insulated copper conductor

single core cable for loop earthing as required.

Point 0.00

Meter 162.00 7860 12,73,320.00

-1.13 Wiring for light /power plug with 4x4 sq.mm FRLS


in surface /recessed PVC conduit along with 2 No

4 sq.mm FRLS PVC insulated copper conductor

single core cable for loop earthing as required.

Meter

0.00

Meter 275 745 2,04,875.00

1.14

Wiring for circuit/ submain wiring alongwith earth

wire with the following sizes of FRLS PVC

insulated copper conductor, single core cable in

surface/ recessed medium class PVC conduit as

required

0.00

(1.14.1) 2x1.5 sq.mm + 1x1.5 sq.mm earth wire Meter106 3280 3,47,680.00

(1.14.2) 2x2.5 sq.mm + 1 x 2.5 sq.mm earth wire Meter0.00

131 5370 7,03,470.00

(1.14.3) 2 x 4 sq.mm + 1 x 4 sq.mm earth wire Meter0.00

162 470 76,140.00

0.00

1.10.2 Group B Point

Page 2 of 8

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 221 885 1,95,585.00

0.00

1.14.5 2 X 10 sq. mm + 1 X 10 sq. mm earth wire 0.00

Metre 327.00 580 1,89,660.00

0.00

1.14.10 4 X 10 sq. mm + 2 X 10 sq. mm earth wire Mtr. 597 1635 9,76,095.00

(1.14.11

)

4x16 sq.mm + 2x16 sq.mm earth wire0.00

Mtr. 883 440 3,88,520.00

1.17 Supplying and drawing following sizes of FR PVC


the existing surface/ recessed steel/ PVC conduit

as required.

0.00

1.17.2 2 x 1.5 sq. mm 36.00 3250 1,17,000.00

1.17.3 3 x 1.5 sq. mm 0.00

50.00 3700 1,85,000.00

0.00

1.17.11 3 x 2.5 sq. mm Metre 75.00 8240 6,18,000.00

1.17.21 3 x 4 sq. mm 0.00

109.00 14450 15,75,050.00

1.18 Supplying and drawing following pair 0.5 sq mm

FR PVC insulated annealed copper conductor,

unarmored telephone cable in the existing

surface/ recessed steel/ PVC conduit as required.

0.00

1.18.2 2 Pair 18.00 3151 56,718.00

1.19

Supplying and drawing co-axial TV cable RG-6

grade, 0.7 mm solid copper conductor PE

insulated, shielded with fine tinned copper braid

and protected with PVC sheath in the existing


Mtr. 0.00

28 3460.00 96,880.00

1.21

Supplying and fixing of following sizes of medium

class PVC conduit along with accessories in

surface/recess including cutting the wall and

making good the same in case of recessed conduit

as required.

0.00

1.21.1 20 mm Mtr. 53 7480 3,96,440.00

1.21.2 25 mm 0.00

Mtr. 65 18315.00 11,90,475.00

1.21.3 32 mm 0.00

Metre 85.00 3415 2,90,275.00

1.24 Supplying and fixing following modular switch/

socket on the existing modular plate & switch box

including connections but excluding modular plate

etc. as required.

0.00

1.24.6 Telephone socket outlet 0.00

Each 95.00 266 25,270.00

1.24.7 TV antenna socket outlet 0.00

94.00 405 38,070.00

1.24.8 Bell push 0.00

111.00 42 4,662.00

1.25

Supplying and fixing stepped type electronic fan

regulator on the existing modular plate switch box


etc. as required.

0.00

284.00 956 2,71,504.00

1.26

Supplying and fixing modular blanking plate on

the existing modular plate & switch box excluding

modular plate as required.

0.00

23.00 1366 31,418.00

1.27 Supplying and fixing following size/ modules, GI

box alongwith modular base & cover plate for

modular switches in recess etc as required.0.00

1.27.1 1 or 2 Module (75mmX75mm) Each 166.00 522 86,652.00

1.31

Supplying and fixing suitable size GI box with

modular plate and cover in front on surface or in

recess, including providing and fixing 3 pin 5/6

amps modular socket outlet and 5/6 amps

modular switch, connection etc. as required. (For

light plugs to be used in non residential buildings).

0.00

303.00 2284 6,92,052.00

1.32



recess, including providing and fixing 6 pin 5/6 &

15/16 amps modular socket outlet and 15/16

amps modular switch, connection etc. as required.

0.00

395.00 1519 6,00,005.00

1.34Supplying and fixing brass batten/ angle holder

including connection etc. as required.0.00

Page 3 of 8

74.00 1871 1,38,454.00

1.38 Supplying and fixing call bell/ buzzer suitable for

single phase, 230 volts, complete as required.

0.00

Each 61 140 8,540.00

1.41

Installation, testing and commissioning of pre-

wired, fluorescent fitting / compact fluorescent

fitting/ LED of all types, complete with all

accessories and tube etc. directly on ceiling/ wall,

including connection with 1.5 sq. mm FRLS PVC

insulated, copper conductor, single core cable and

earthing etc. as required

0.00

91 650 59,150.00

1.44 Installation, testing and commissioning of ceiling

fan, including wiring the down rods of standard

length (upto 30 cm) with 1.5 sq. mm FRLS PVC

insulated, copper conductor, single core cable etc.

as required.

0.00

Each 95 228 21,660.00

1.45

Installation, testing and commissioning of ceiling



insulated, copper conductor, single core cable,

including providing and fixing phenolic laminated

sheet cover on the fan box etc. as required.

0.00

122 728 88,816.00

1.5 Installtion of exhasut fan up to 450 mm sweep in

the existing opening, including making the hole to

suit the size of the abvoe fan, making good the

damage, connection testiing and commissioning

etc as requried

0.00

Each 204 71 14,484.00

1.50Installation of exhaust fan in the existing opening,

including making good the damage, connection,

testing, commissioning etc. as required.

0.00

1.50.1 Upto 450 mm sweep Each 204 489 99,756.00

1.51Extra for fixing the louvers/ shutters complete

with frame for a exhaust fan of all sizes.0.00

90.00 428 38,520.00

2.7 Supplying and fixing following way prewired SP&N

MCB distribution board of steel sheet for 240 volts

on surface/ recess complete with loose wire box,

terminal connectors for all incoming and outgoing

circuits, duly prewired with suitable size FR PVC

insulated copper conductor up to terminal blocks,

tinned copper bus bar, neutral link, earth bar, din

bar, detachable gland plate, interconnections,

powder painted including earthing etc. as

required. (But without MCB/ RCCB/ Isolator)

0.00

2.7.4 4(2+4) Each 2508.00 2 5,016.00

2.7.5 2 + 8 way, Double door Each 2995.00 37 1,10,815.00

2.7.6 2 + 12 way, Double door 0.00

Each 3613.00 32 1,15,616.00

2.8 Supplying and fixing following way prewired TP&N

MCB distribution board of steel sheet for 415 volts

on surface/ recess complete with loose wire box,

terminal connectors for all incoming and outgoing

circuits, duly prewired with suitable size FR PVC

insulated copper conductor up to terminal blocks,

tinned copper bus bar, neutral link, earth bar, din

bar, detachable gland plate, interconnections,

powder painted including earthing etc. as

required.(But without MCB/ RCCB/ Isolator)

0.00

(2.8.5) 4 way (4+12) Double door Each 7357 6 44,142.00

0.00

(2.8.6) 6 way (4+18) Double door Each 9496 10 94,960.00

0.002.8.7 8 way (4 + 24), Double door Each 10405 99 10,30,095.00

0.00

2.8.8 12 way (4 + 36), Double door Each 12782 97 12,39,854.00

2.9.5 4W-2DR 7901 3 23,703.00

2.10

Supplying and fixing 5 amps to 32 amps rating,

240/415 volts, "C" curve, miniature circuit breaker

suitable for inductive load of following poles in

the existing MCB DB complete with connections,

testing and commissioning etc. as required

0.00

2.10.1 Single pole Each 169 3393 5,73,417.00

Page 4 of 8

2.10.5 3POLE Each 696 60 41,760.00

2.12 Supplying and fixing following rating, double pole,

240 volts, isolator in the existing MCB DB

complete with connections, testing and

commissioning etc. as required.

0.00

2.12.1 40 amps Each 218 25 5,450.00

2.12.2 63 amps 0.00

Each 250 8 2,000.00

2.13

Supplying and fixing following rating, four pole,

415 volts, isolator MCB in the existing MCB DB



0.00

2.13.2 63 amps Each 670 131 87,770.002.13.3 63 amps Each 851 6 5,106.00

2.14

Supplying and fixing following rating, double pole,

(single phase and neutral), 240 volts, residual

current circuit breaker (RCCB), having a sensitivity

current upto 300 milliamperes in the existing MCB

DB complete with connections, testing and

commissioning etc. as required

0.00

(2.14.1) a) 25 amps Each 1645 20 32,900.00

0.00

(2.14.2) a) 40 amps Each 1714 40 68,560.00

0.00

2.14.3 63 amps Each 2237 171 3,82,527.00

2.18

Supplying and fixing 20 amps, 240 volts, SPN

industrial type, socket outlet, with 2 pole and

earth, metal enclosed plug top alongwith 20 amps

"C" curve, SP, MCB, in sheet steel enclosure, on

surface or in recess, with chained metal cover for

the socket out let and complete with connections,

testing and commissioning etc. as required.

0.00

954 82 78,228.00

(2.20) Supplying and fixing 30 amps, 415 volts TPN

industrial type, socket outlet with 4 pole and earth

metal enclosed plug top along with 30 amps 'C'

Curve, TP, MCB in sheet steel encloser on

surface or in recess with chained metal cover for

the socket outlet and complete with conncections,

testing & commissioning etc as required.

0.00

Each 2473 9 22,257.00

5.2 Earthing with G.I. earth pipe 4.5 metre long, 40

mm dia including accessories, and providing

masonry enclosure with cover plate having locking

arrangement and watering pipe etc. with

charcoal/ coke and salt as required.

Set 3926 2 7,852.00

5.4

Earthing with G.I. earth plate 600 mm X 600 mm X

6 mm thick including accessories, and providing

masonry enclosure with cover plate having locking

arrangement and watering pipe of 2.7 metre long

etc. with charcoal/ coke and salt as required.

0.00

4490 61 2,73,890.00

(5.6) Earthing with Copper earth plate 600 mm x 600

mm x 3 mm thick including accessories and

providing masonary enclosure with cover plate

having locking arrangement and watering pipe of

2.7 mtr long etc. with charoal or coke and salt as

required.

Set 9292 4 37,168.00

(5.8) Supplying and laying 25 mm x 5 mm Copper strip

at 0.50 meter below ground as strip earth

electrode , including connection/terminating with

G.I. nut, bolt, spring, washer etc. as required.

Set 753 300 2,25,900.00

5.9

Supplying and laying 25 mm X 5 mm G.I strip at

0.50 metre below ground as strip earth electrode,

including connection/ terminating with G.I. nut,

bolt, spring, washer etc. as required. (Jointing

shall be done by overlapping and with 2 sets of

G.I. nut bolt & spring washer spaced at 50mm)

0.00

109.00 1560 1,70,040.00

5.11

Providing and fixing 25 mm X 5 mm G.I. strip in 40

mm dia G.I. pipe from earth electrode including

connection with G.I. nut, bolt, spring, washer

excavation and re-filling etc. as required.

0.00

421.00 850 3,57,850.00

5.16 Providing and fixing 6 SWG dia G.I. wire on

surface or in recess for loop earthing as required.

Page 5 of 8

Metre 700.00 20 14,000.00

6.2

Providing and fixing of lightning conductor finial,

made of 25 mm dia 300 mm long, G.I. tube,

having single prong at top, with 85 mm dia 6 mm

thick G.I. base plate including holes etc. complete

as required.

0.00

369.00 22 8,118.00

6.4 72.00 2 144.00

6.7

Providing and fixing G.I. tape 20 mm X 3 mm thick

on parapet or surface of wall for lightning

conductor complete as required.(For horizontal

run)

0.00

68.00 1560 1,06,080.00

6.8



conductor complete as required.(For vertical run)

0.00

98.00 320 31,360.00

6.9 Fixing of copper/ G.I. tape 20 mm X 3 mm thick on

parapet or surface of wall for lightning conductor

complete as required.(For horizontal run)0.00

35.00 280 9,800.00

0.00

6.10 Fixing of copper/ G.I. tape 20 mm X 3 mm thick on

parapet or surface of wall for lightning conductor

complete as required.(For vertical run)0.00

72.00 459 33,048.00

0.00

6.12 Providing and fixing testing joint made of 20mm x

3mm thick GI strip, 125mm long with 4 Nos. GI

bolts,nuts,chuck nuts and spring washers etc.

complete as required. (6.12)

0.00

71.00 32 2,272.00

6.14 Providing and laying GI tape 32mm x 6mm from

earth electrode directly in ground as required.

(6.14)

0.00

141 650 91,650.00

7.1 Laying of one number PVC insulated and PVC

sheathed / XLPE power cable of 1.1 KV grade of

following size direct in ground including

excavation, sand cushioning, protective covering

and refilling the trench etc as required.

0.00

7.1.2 Above 35 sq. mm and upto 95 sq. mm Metre 202 1290 2,60,580.00

0.00

7.1.3 Above 95 sq. mm and upto 185 sq. mm Metre 210 240 50,400.00

MR E-

12

Supply of 3.5 cx95 sq. Mm Aluminium Arm cable ,

1.1 kv grade XLPE insulated0.00

3C95 600 1290.00 7,74,000.00

3C150 1000 240.00 2,40,000.00

MR-RA

E-1,2,2^

Supplying of following type recessed / surface



CFL lamps complete as required.

0.00 0.00

Supply of lighting CFL bulbs 18 watt. Each 223 1420 3,16,660.00

0.00 0

Supply of 1X 36 watt tube light. 1200 989 11,86,800.00

MR-RA

E-3

Supplying ,testing and commissioning of motion

sensor device for controlling lights .0.00 0

Each 1600 42 67,200.00

MR E-6

Supply of exhaust fan with 250 mm sweep with

rust proof body and noice less operation complete

with louvers.

0

Each 1525.00 240 3,66,000.00

MR E-7

Supply , fixing testing and commissioning of

desert cooler with suitable size , body of

minimum 20 SWG GI sheet of .8 mm thick with

fan GEC motor 30' and of Honey Comb paper pad

(three speed -high ,medium and low , air delivery

4500 m3/hour) with metallic blade duly painted

with anti corrosive oven cured paint fitted with

the body, pump motor duly assembled and

complete in all respect .

0

Each 14300.00 440 62,92,000.00

MR E-8


water cooler (ISI )with 150 ltr/ hour cooling

capacity , 150 ltr storage capacity with 2 faucets

complete in all respect

0

Each 65700.00 6 3,94,200.00

Page 6 of 8

MR E-

11

Supplying ,installation ,testing and

commissioning of cubical type LT panel

suitable for 415 V, 3 phase 4 wire 50 Hz AC

supply , fabricated in compartmentalized

design from CRCA sheet of 2 mm thickfor

frame work and covers , 3 mm thick for gland

plates i/c cleaning and finishing complete

with 7 tank process for powder coating in

approved shade having 200 Amp. capacity

extentible type TPN aluminium alloy bus-bars

of high conductivity ,DMC/SMC bus bar

support with short circuit withstand capacity

of 31 MVA for 1 sec. ,bottom base channel of

MS section not less than 100mmx50mmx5

mm thick fabrication shall be done in

transportable section ,intire panel shall have

a comman copper earth busbar of size

25mmx5 mm at the rear with 2 no. earth

stud,solid connections from main bus bar to

switch gears with required size of AL. bus

bars and control wiring .

Incoming:

160 Amp TP +N MCCB,35 KA (Ics=Icu upto 433 V)

CT of ratio 160/5 Amps = 3 no.

Multifunction meter - V,I,KWH,PF

3 nos. phase indication LED lampswith 6 Amp

backup MCB

Outgoing:

100 Amp 4 pole MCCB=1 No.

10 no. 63 Amp. 4 pole MCB ,C Curve

2 no. 63 Amp. double pole MCB,curve

Set 150000 3 4,50,000.00

MR

Supplying and fixing of the following sheet steel





door and complete.0

Set 1000 8 8,000.00

MR - RA

E-1

Supply of 3cx150 sq. Mm Aluminium Arm cable ,

1.1 kv grade XLPE insulated 0

Set 1000 240 2,40,000.00

0.00

MR - RA

E-3Supply of lighting CFL bulbs ( 8 Watt to 14 watt) 0.00

223 449 1,00,127.00

MR - RA

E-4Supply of 28 watt tube light. 0.00

904 242 2,18,768.00

MR - RA

E-5

Supplying of 1200mm A.C Ceiling fan sweep

complete 0.00

Each 1600 256 4,09,600.00

MR - RA

E-6


rust proof body and noise less operation complete

with louvers. 0

1470 132 1,94,040.00

MR - RA

E-7

Supplying ,installation ,testing and commissioning

of cubical type meter panel board suitable for 415

V, 3 phase 4 wire 50 Hz AC supply , fabricated in

compartmentalized design from CRCA sheet of 2

mm thick for frame work and covers , 3 mm thick

for gland plates i/c cleaning and finishing

complete with 7 tank process for powder coating

in approved shade having 200 Amp. capacity

extendable type TPN aluminium alloy bus-bars of

high conductivity ,DMC/SMC bus bar support with

short circuit withstand capacity of 31 MVA for 1

sec. ,bottom base channel of MS section not less

than 100mmx50mmx5 mm thick fabrication shall

be done in transportable section ,entire panel

shall have a common copper earth bus bar of size



switch gears with required size of AL. bus bars and

control wiring .

0

257000 2 5,14,000.00

Page 7 of 8

MR - RA

E-8

Supplying ,installation ,testing and commissioning

of cubical type meter panel board suitable for 415

V, 3 phase 4 wire 50 Hz AC supply , fabricated in

compartmentalized design from CRCA sheet of 2

mm thick for frame work and covers , 3 mm thick

for gland plates i/c cleaning and finishing

complete with 7 tank process for powder coating

in approved shade having 200 Amp. capacity

extendable type TPN aluminium alloy bus-bars of

high conductivity ,DMC/SMC bus bar support with

short circuit withstand capacity of 31 MVA for 1

sec. ,bottom base channel of MS section not less

than 100mmx50mmx5 mm thick fabrication shall

be done in transportable section ,entire panel

shall have a common copper earth bus bar of size



switch gears with required size of AL. bus bars and

control wiring .

237000 2 4,74,000.00

MR E-7










Each 14300 120 17,16,000.00

MR E-8


water cooler (ISI )with 150 ltr/ hour cooling

capacity , 150 ltr storage capacity with 2 faucets

complete in all respect

0.00

Each 65700 6 3,94,200.00

(NS) Supplying of following type recessed / surface



CFL lamps complete as required. (HAVELLS /

BAJAJ / WIPRO)

0.00

d) 18W LED Batton (4') 0.00

Each 650 20 13,000.00

MR

Supplying, Fixing, Testing & Commitioning of High

quality, compact and aesthetically designed wall

mounting box speaker to suit interiors as in

Offices & Office Buildings. Clear and clean sound

for speech and music. 8W/100V capacity of

reputed brand.

Each 1400 120 1,68,000.00

(NS) Ceiling Light Point for fall ceiling 0.00

b) 8W LED 0.00

Each 2500 124 3,10,000.00


of microprocessor based addressable main fire

alarm control panel of 2 zone capacity as

complete with batteries, battery charger

illuminated numeric digram complete as required.

No. 75000 2 1,50,000.00

0.00

MR Water Coolers Each 15000 20 3,00,000.00

MR AIR Coolers

Each 10000 140 14,00,000.00

212,40,365.00 253,19,965.00

fire fighting system 9,06,150.00

Solar System 4,80,000.00

479,46,480.00

Total=

Grand Total=

Page 8 of 8

PROJECT - PROPOSED 120 MEN BARRACK BUILDING AT "BHOPAL"

BILL OF QUANTITIES - FIRE FIGHTING WORKS

S. NO. DESCRIPTION UNIT QTY. RATE TOTAL

A. PIPING & VALVES

1 Providing and fixing M.S. pipe to I.S. 1239 (Heavy class) complete with all supports &

fittings like, unions, couplings, bends, elbows, tees, offsets,reducers, flanges as per table 'E'

etc. to complete the work as per the requirement at site including painting with one coat of

primer after surface preparartion and two coats of synthetic enamel paint, cutting and

making good the walls good complete. Pipe upto 40 mm dia threaded joints with holdtite,

50 mm dia and above should be welded joint ( all type ) ( internal works/External Works).

a. 50 mm dia. RM 12 360.00 4,320.00

b. 25mm dia RM 6 1300.00 7,800.00

c. 150mm dia RM 108 1800.00 1,94,400.00

2 Providing and fixing cast iron dual plate wafer type non return valves of PN1.6 including

nuts, bolts,1.5mm thick compressed asbestos gasket including matching flanges as per

table "E" complete

a. 150 mm dia. Nos 1 8200.00 8,200.00

3 Providing and fixing C.I. butterfly valves PN 1.6 complete with bolts, nuts 1.5mm thick

compressed asbestos gasket companion flanges as per table "E" complete.

a. 150 mm dia with lever Nos 12 6500.00 78,000.00

4 Providing and fixing brass ball valve (full bore type) with plastic coated lever and screwed

female ends tested to 20 Kg/ cm2 of approved quality as specified.

a. 50 mm dia. Nos 10 900.00 9,000.00

5 Providing and fixing gunmetal single acting air release valve with screwed inlet 25 mm dia..

Nos 2 1200.00 2,400.00

6 Providing and fixing blank flanges as per table 'E' with asbestos gasket, nut, bolts, washers

complete

a. 150 mm dia. Nos 2 600 1,200.00

TOTAL C/F TO SUMMARY 3,05,320.00

B. FIRE HYDRANT ACCESSORIES

-1-




1 Providing and fixing SS306 Single headed landing valve conforming to IS -5290 (Type-A)

with 63 mm dia. single instantaneous female coupling on the outlet SS316 metal blank cap

and chain, necessary companion flanges, nuts, bolts, washer and gasket complete as per

specification. (ISI marked). All parts and body shall be of SS306 as per IS:5290.

a. Single outlet Nos 10 5500.00 55,000.00

2 Providing and fixing first aid fire hose reel drum wall mounting, swinging type(Powder

coated finish in fire red) fitted with 20 mm dia. 30 m long high pressure hose(IS:12585,

Type-2) with 5 mm outlet SS nozzle with shut off valve (IS:8090). Name of

Manufacturer should be embossed on the drum and complete hose reel drum shall be

conforming to IS:884) Nos 8 6000.00 48,000.00

3 Providing and fixing 63 mm dia. 15m long rubberized lined hose including SS306 male and

female instantaneous type coupling approved by fire authority, machine wound with

copper wire complete in all respects. Hose shall conform to IS 636 Type-A and coupling to

IS 903 -1975 ( ISI marked) Nos 20 4800.00 96,000.00

4 Providing and fixing standard short size SS306 branch pipe with gunmetal nozzle 16 mm

dia. outlet with standard instantaneous type 63 mm dia. coupling. (ISI marked, IS:903)

Nos 10 2500.00 25,000.00

5 Providing and fixing door with frame for all internal fire hydrants fabricated from 20x20x3

mm and 40x20x3 mm aluminium hollow box sections mounted with 3 no. of 100 mm

Aluminium butt hinge on Aluminium angle frame of 45x45x5 mm size with hold fasts fixed

to wall with P.C.C. (1:2:4) blocks 100x100x100 mm including 2 nos allen key lock for

locking along with padlock arrangement & fully glazed with 4 mm thick float glass

approved by local Fire Authority, powder coated fire red finish with " fire hose' written on

front suitable to house 15 mm long two length of canvas hose with couplings, one no of

branch pipe, one fire mans axe and two numbers of portable extinguishers, first aid fire

hose and supports for hoses, branch pipes, Axe and hose reel. Size 2100x 900 mm

complete as per approved design including necessary fixing arrangement for hoses & axe

and branch pipe.)

Nos 8 7600.00 60,800.00

-2-




6 Providing and fixing gunmetal fire brigade inlet head as per IS:904 Specification tested

for 20 Kg/cm2 with 63 mm dia. instantaneous type inlet and 100/150mm dia.. flanged

outlet with built-in check valve for fire brigade connection to under ground tanks and fire

risers including companion flanges as portable " E" including nuts, bolts & washers etc.

a. Three way Nos 1 10000.00 10,000.00

7 Providing and fixing gunmetal fire brigade suction 150 mm dia. for fire tank complete with

PVC Cap companion flange as per table "E" nuts, bolts, gasket etc

150 mm Nos. 1 7500.00 7,500.00

8 Supplying and fixing of Fire Man's Axe with heavy insulated rubber tested upto 20 KV and

confirming to IS :926. Nos. 8 470.00 3,760.00

8 Air Cushion Tank for Risers

Providing and fixing of air vessel of the following specifications fabricated with MS Pipe of

thickness specified.

specifications

a. Diameter : 200 mm

b. Shell Thickness: 6.35 mm

c. Dish Ends : 10 mm

d. Height : 1000 mm

e. Finishing: Two coats of red enamal

paint over primer out side and two

coats of epoxy coating inside.

f. Material of construction: M.S

g. Test Pressure: 20 Kg/Sq.Cm.

i. Height of supporting legs: 400 mm

j. Quantity Each 2 15225.00 30,450.00

Note: Contractor should submit general arrangement drawings before fabrication of vessel

and ultrosonic test report to be submitted on supply of vessel and test to be conducted at

the presence of Plumbing-In-Charge. Also cost shall include two nos. Gunmetal NRV(ISI

Marked)

-3-




9 Providing and fixing "Y" suction strainer with flanged connection 150 mm dia. suitable

for 2280 lpm discharge with stainless steel 20 mesh complete including companion

flanges etc. suitable for 150 dia. inlet and 150 dia. outlet including inside with rubberized

paint and outside with two coats of enamel paint of approved shade after surface

preparation necessary stainless steel nuts, bolts, washers etc..

Nos 1 15000.00 15,000.00


C. TERRACE FIRE FIGHTING PUMPS & EQUIPMENT

Notes: Each Pumps will be provided with mechanical seal, Love joy coupling, coupling

guard, base frame, anti-vibration pads, bourdon pressure gauge, anti-vibration pipe

sections on suction and delivery, cable and earth wire from pump motor to motor control

panel. Cable size from pump to control panel will be 3cx16sqmm copper conductor

armoured cable. Each pump shall be of CI body, bronze impeller, SS shaft and mechanical

seal

1. Supplying, installing, testing & commissioning of electric driven automatic pressurisation

pump set consisting of the following :

Each 1 125000.00 1,25,000.00

Horizontally mounted centrifugal end suction type Terrace pump complete for delivery of

900 ltrs/minute against a total head of 35 metres approx complete with arrangement for

testing of the working of the pumping set as required. Rate shall also include Mechanical

Seal.

Squirrel cage induction motor suitable for 415 V, 50 Hz, AC supply of suitable 10 HP rating

for the above pum with synchronous speed of 2900 RPM T.E.F.C. type such as confirming

to IPL55 and flexible coupling and coupling guard with the pump.

Common bed plate of fabricated mild steel channel or cast iron type.

-4-




2 Manufacturing supplying installation testing and commissioning of common control pannel

for fire fighting pump system comprising of Terrace pump. All the components shall be

housed in 2 MM thick CRCA MS Sheet. The control pannel shall be cubical type dust and

vermin proof hinged and lockable doors and deed friend operation. The panel shall be

powder coated with siemense gray and doors will be sky blue. All internal control wiring

shall be 1.5 MM sqm copper provided. Seperate compartment for each

motor/pumpstarter, busbar chamber, cable alley and in comer. All MCCB shall be door

lockable type copper earthing bus bar shall be provided, control panel shall also be

provided with potential free contacts for Building management system and level controller

for all the pumps for dry run protection. Panel is complete with following

Each 1 35000.00 35,000.00

Panel shall be complete with 40A MCB(35 KA) main incomer, phase indicating lights with 6

A MCB, Voltmeter to read voltage between 0-440V with voltage selector switch,

Amperemeter to read current between 0-250 A with ampere selector switch, 32A(10 KA)

MCB with socket for welding, 1 No. DOL starter for pump, 1 No. auto manual switch , 1 No

single phase preventors complete with earthing of panel and motors.


E. FIRE EXTINGUISHERS & MISC. ITEMS

1 Providing and fixing Carbon-di-oxide fire extinguishers consisting of welded M.S cylindrical

body, squeeze lever discharge valve fitted with internal discharge tube, 30cms long high

pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS : 15683

finished externally with red enamel paint and fixed to wall with brackets with rawl

plug/dash fasteners complete with internal charge. Capacity 4.5 kg. ISI Marked.( Contractor

should submit test certificate form manufacturer along with serial number of every

extinguishers supplied.)

Nos 8 6597.50 52,780.00

2 Providing and fixing ABC powder type fire extinguishers consisting of welded M.S.

cylindrical body automatic modular ABC powder type extinguisher actuated through a

sprinkler head mounted on The extinguisher body finished externally with red enamel paint

and fixed to ceiling with brackets complete with internal charge. [For Transformer/DG/LT

panel room]

a. Capacity 4 Kg.(IS:15683) Nos 8 3045.00 24,360.00

-5-




3 Providing and fixing of self illuminated / auto glow "EXIT" signs printed on

photoluminescent sheet containing self illuminated base chemical, of appropriate size not

less than 400 x 150 mm, suspended from ceiling or fixed to the walls with accessories as

required and as directed at site. Nos 12 1,015.00 12,180.00

TOTAL C/F TO SUMMARY 89,320.00

9,06,150.00

-6-

S.No. Description Unit Rate Qty. Amount

1. MR Providing and fixing solar water heater without

electrical back-up with following specs:

System capacity:125 LPD

System type:Thermosyphon Circulation

SOLAR COLLECTORS

Type of collector:Cu-Cu, Ultra sonically welded

Size of collector:2080x1070x100mm

Absorber area:2 sqm

Absorber Coating:Selective coated black chrome

Nelson

Collectors absorbtivity:>0.95

Collectors emmissivity:<0.20

Collector box material:Extruded Aluminium frame

1.4mm

Fin width:120mm

Hardware:SS-304

Weight:40 Kgs(Dry)

INSULATING MATERIAL FOR SOLAR COLLECTORS

Material:Rockwool

Thickness of bottom insulation:50mm :

Thickness of side insulation:25mm

Thermal conductivity:0.029 W/mk

Density:40 Kg./cum

COLLECTOR’S GLAZING MATERIAL :

Material:Toughned clear glass

Thickness:4mm

Transitivity:88%

Glass Beeding:EPDM

COLLECTOR’S STANDS

Material:30x30x3mm thick

ANNEX -4D BOQ FOR SOLAR WATER SYSTEM


Details of protective coating:powder coated

HOT WATER STORAGE TANK

No. of tank with capacity: 1 No 125 lts

Material:SS-304

Capacity:125 lts.

Insulating material for tank:Glass wool

Thermal conductivity of insulation:0.028 to 0.033

W/mk :

Density of insulation material:48 Kg/cum

Thickness of insulation material:100mm :

Cladding material:Al 22 SWG

SYSTEM PIPING:GI B class (IS:1239)

Pipe fitting :ISI Marked

Valves:Gunmetal

Insulation:Glass wool

Insulation material density:48kg/m

Insulation thickness:50mm

Insulation cover:Wiremesh finished with aluminium

cladding

INSTRUMATION & CONTROLS

Water meter

Type:IS marked

Material:Gunmetal

Vane type:Metallic form designed

End connection:screwed end

Temperature Gauge

Type:Dial gauge, mercury in type tube

Material:SS stem

Vane type:0-120 deg celcius

End connection:1/2" BSP

Gate valve

Type:Screwed

Material:Gunmetal


Make:ISI Quality

Strainer

Type:Y type

Material:cast Iron

Purpose:Filtration of suspended material Set 40000 4 160000.00

For 03 barracks = ( 160000x 03 =480000) 4,80,000.00

DSR

Item

no.

Description

UnitRate (in

Rs.)Total

DSR N.DSR

1.10

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5

sq.mm FR PVC insulated copper conductor single core cable in surface /

recessed medium class PVC conduit, with modular switch, modular plate,

suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated

copper conductor single core cable etc as required.

Light point 585.00 197 115245

Fan point 585.00 75 43875

exhaust

point585.00 33 19305

1.11

Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper

conductor single core cable in surface / recessed medium class PVC conduit,

2 way modular switch, modular plate, suitable GI box and earthing the point

with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as

required.Point 770.00 144 110880

1.10.2

Group B

Point

Detailed Estimate for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P) (BARRACKS )

ANNEX-4B :Estimate for providing internal Electrical installation in barracks to be constructed in ITBP Chapra(Bihar)

Total Amount

1.14

Wiring for circuit/ submain wiring alongwith earth wire with the following

sizes of FRLS PVC insulated copper conductor, single core cable in surface/

recessed medium class PVC conduit as required

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 221.00 60 13260

1.14.104 X 10 sq. mm + 2 X 10 sq. mm earth wire

Mtr. 597 440 262680

1.17 Supplying and drawing following sizes of FR PVC insulated copper conductor,

single core cable in the existing surface/ recessed steel/ PVC conduit as

required.1.17.2 2 x 1.5 sq. mm Metre 36.00 920 33120

1.17.3 3 x 1.5 sq. mm Metre 50.00 240 12000

1.17.11 3 x 2.5 sq. mm Metre 75.00 1680 126000

1.17.21 3 x 4 sq. mm

Metre109.00 1800 196200

1.18 Supplying and drawing following pair 0.5 sq mm FR PVC insulated annealed

copper conductor, unarmored telephone cable in the existing surface/

recessed steel/ PVC conduit as required.1.18.2 2 Pair Metre 18.00 80 1440

1.19

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper

conductor PE insulated, shielded with fine tinned copper braid and protected

with PVC sheath in the existing surface/ recessed steel/ PVC conduit as

required.

Mtr. 28 50 1400

1.21

Supplying and fixing of following sizes of medium class PVC conduit along

with accessories in surface/recess including cutting the wall and making good

the same in case of recessed conduit as required.

1.21.1 20 mm Mtr. 53 1320 69960

1.21.2 25 mm Mtr. 65 2340 152100

1.21.3 32 mm Metre 85.00 200 17000

1.24 Supplying and fixing following modular switch/ socket on the existing

modular plate & switch box including connections but excluding modular

plate etc. as required.

1.24.6 Telephone socket outlet Each 95.00 2 190

1.24.7 TV antenna socket outlet Each 94.00 1 94

1.25

Supplying and fixing stepped type electronic fan regulator on the existing

modular plate switch box including connections but excluding modular plate

etc. as required.

Each 284.00 75 21300

1.26

Supplying and fixing modular blanking plate on the existing modular plate &

switch box excluding modular plate as required. Each 23.00 134 3082

1.27 Supplying and fixing following size/ modules, GI box alongwith modular base

& cover plate for modular switches in recess etc as required.

1.27.1 1 or 2 Module (75mmX75mm) Each 166.00 134 22244

1.31

Supplying and fixing suitable size GI box with modular plate and cover in

front on surface or in recess, including providing and fixing 3 pin 5/6 amps

modular socket outlet and 5/6 amps modular switch, connection etc. as

required. (For light plugs to be used in non residential buildings).Each 303.00 180 54540

1.32

Supplying and fixing suitable size GI box with modular plate and cover in

front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16

amps modular socket outlet and 15/16 amps modular switch, connection

etc. as required.Each 395.00 15 5925

1.34Supplying and fixing brass batten/ angle holder including connection etc. as

required.Each 74.00 140 10360

1.38Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts,

complete as required.Each 61 6 366

1.41

Installation, testing and commissioning of pre-wired, fluorescent fitting /

compact fluorescent fitting/ LED of all types, complete with all accessories

and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm

FRLS PVC insulated, copper conductor, single core cable and earthing etc. as

required

Each 91 341 31031

1.45

Installation, testing and commissioning of ceiling fan, including wiring the

down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC

insulated, copper conductor, single core cable, including providing and fixing

phenolic laminated sheet cover on the fan box etc. as required.Each 122 75 9150

1.50

Installation of exhaust fan in the existing opening, including making good the

damage, connection, testing, commissioning etc. as required.

1.50.1 Upto 450 mm sweep Each 204 39 7956

1.51Extra for fixing the louvers/ shutters complete with frame for a exhaust fan

of all sizes.Each 90.00 39 3510

2.7 Supplying and fixing following way prewired SP&N MCB distribution board of

steel sheet for 240 volts on surface/ recess complete with loose wire box,

terminal connectors for all incoming and outgoing circuits, duly prewired

with suitable size FR PVC insulated copper conductor up to terminal blocks,

tinned copper bus bar, neutral link, earth bar, din bar, detachable gland

plate, interconnections, powder painted including earthing etc. as required.

(But without MCB/ RCCB/ Isolator)

2.7.5 2 + 8 way, Double door Each 2995.00 1 2995

2.8 Supplying and fixing following way prewired TP&N MCB distribution board of

steel sheet for 415 volts on surface/ recess complete with loose wire box,

terminal connectors for all incoming and outgoing circuits, duly prewired

with suitable size FR PVC insulated copper conductor up to terminal blocks,

tinned copper bus bar, neutral link, earth bar, din bar, detachable gland

plate, interconnections, powder painted including earthing etc. as


2.8.7 8 way (4 + 24), Double door Each 10405 4 41620


2.10

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve,

miniature circuit breaker suitable for inductive load of following poles in the

existing MCB DB complete with connections, testing and commissioning etc.

as required

2.10.1 Single pole Each 169 195 32955

2.12 Supplying and fixing following rating, double pole, 240 volts, isolator in the


as required.

2.12.1 40 amps Each 218 1 218

2.13

Supplying and fixing following rating, four pole, 415 volts, isolator MCB in the


as required.

2.13.2 63 amps Each 670 8 5360

2.14

Supplying and fixing following rating, double pole, (single phase and neutral),

240 volts, residual current circuit breaker (RCCB), having a sensitivity current

upto 300 milliamperes in the existing MCB DB complete with connections,


2.14.3 63 amps Each 2237 24 53688

2.18

Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet,

with 2 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve,

SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal

cover for the socket out let and complete with connections, testing and

commissioning etc. as required. Each 954 2 1908

5.4

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including

accessories, and providing masonry enclosure with cover plate having locking

arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke

and salt as required.Set 4490 4 17960

5.9

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as

strip earth electrode, including connection/ terminating with G.I. nut, bolt,

spring, washer etc. as required. (Jointing shall be done by overlapping and

with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) Metre 109.00 50 5450

5.11

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from

earth electrode including connection with G.I. nut, bolt, spring, washer


Metre 421.00 60 25260

6.2

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm

long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I.

base plate including holes etc. complete as required. Each 369.00 2 738

6.7

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of

wall for lightning conductor complete as required.(For horizontal run)Metre 68.00 120 8160

6.8

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of

wall for lightning conductor complete as required.(For vertical run)Metre 98.00 40 3920

6.12 Providing and fixing testing joint made of 20mm x 3mm thick GI strip,

125mm long with 4 Nos. GI bolts,nuts,chuck nuts and spring washers etc.

complete as required. (6.12) Nos. 71.00 4 284

6.14 Providing and laying GI tape 32mm x 6mm from earth electrode directly in

ground as required. (6.14)Mtr. 141 50 7050

7.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of

1.1 KV grade of following size direct in ground including excavation, sand

cushioning, protective covering and refilling the trench etc as required.

7.1.2 Above 35 sq. mm and upto 95 sq. mm Metre 202 180 36360

MR E-

12

Supply of 3.5 cx95 sq. Mm Aluminium Arm cable , 1.1 kv grade XLPE

insulated

Metre

600 180 108000

MR-RA

E-

1,2,2^

Supplying of following type recessed / surface mounted fluorescent light

fixture complete with electronic choke earthing point and with TL-5 / CFL

lamps complete as required.

Supply of lighting CFL bulbs 18 watt. Each 223 140 31220

Supply of 1X 28 watt tube light. Each 1200 223 267600

MR-RA

E-3

Supplying ,testing and commissioning of motion sensor device for

controlling lights .Each 1600 14 22400

MR E-4

Supplying of ceiling fan, complete with blades with suitable length of down

rods shackle insulator earthing point including connection etc . as required.-

(1200 SWEEP)Each 1600.00 75 120000

MR E-5Supplying of 305 mm 1400 RPM exhaust fan complete with louver and bird

guard screen with 3 core flexible wire as required.Each 1760.00 33 58080

MR

Supplying, Fixing, Testing & Commitioning of High quality, compact and

aesthetically designed wall mounting box speaker to suit interiors as in

Offices & Office Buildings. Clear and clean sound for speech and music.

8W/100V capacity of reputed brand.Each 1400.00 40 56000

MR E-

10

Supplying, Fixing, Testing & Commitioning Four Zone Amplifier with mic and

should be ideal for multi-speaker installations where a user needs to

separately set power levels for Four separate areas of 1000 Watt capacity

complete in all respect and as required. Each 15000.00 1 15000

MR E-

11

Supplying ,installation ,testing and commissioning of cubical type LT

panel suitable for 415 V, 3 phase 4 wire 50 Hz AC supply , fabricated in

compartmentalized design from CRCA sheet of 2 mm thickfor frame

work and covers , 3 mm thick for gland plates i/c cleaning and finishing

complete with 7 tank process for powder coating in approved shade

having 200 Amp. capacity extentible type TPN aluminium alloy bus-

bars of high conductivity ,DMC/SMC bus bar support with short circuit

withstand capacity of 31 MVA for 1 sec. ,bottom base channel of MS

section not less than 100mmx50mmx5 mm thick fabrication shall be

done in transportable section ,intire panel shall have a comman

copper earth busbar of size 25mmx5 mm at the rear with 2 no. earth

stud,solid connections from main bus bar to switch gears with

required size of AL. bus bars and control wiring .

Incoming:




3 nos. phase indication LED lampswith 6 Amp backup MCB

Outgoing:



2 no. 63 Amp. double pole MCB,curve Set 150000 150000

MR

Supplying and fixing of the following sheet steel clad wall / recess mounting

telephone tag blocks of krone make constructed from 14 SWG sheet steel

finished with red oxide coating of two coats of paint with hinged gasketted

powder coated door and complete.

a) 05 pairs Set 1000 1000

MR E-7

Supply , fixing testing and commissioning of desert cooler with suitable size ,

body of minimum 20 SWG GI sheet of .8 mm thick with fan GEC motor 30'

and of Honey Comb paper pad (three speed -high ,medium and low , air

delivery 4500 m3/hour) with metallic blade duly painted with anti corrosive

oven cured paint fitted with the body, pump motor duly assembled and


Each 14300.00 40 572000

MR E-8

Supply , fixing testing and commissioning of water cooler (ISI )with 150 ltr/

hour cooling capacity , 150 ltr storage capacity with 2 faucets complete in all

respect

Each 65700.00 2 131400

FIRE ALARM SYSTEM

1.21.2 Supplying and fixing of following sizes of PVC conduit along with acessories in

surface/recess including cutting the wall and making good the same in case

of recessed conduit as required.

a) 25mm Meter 62.00 850 52700

(1.17.2)Supplying and drawing of FR PVC insulated copper conductor single core

cable of 2x1.5 sq.mm. in existing conduit as required.Meter 36.00 1000 36000

MR RA

E-13

Supplying, installation, testing and commissioning of inteligent analouge

photoelectric optical type smoke detector and mounting base with LED light


Each 3350.00 50 167500

MR RA

E-13

Supplying, installation, testing and commissioning of inteligent analouge

photoelectric optical type heat detector and mounting base with LED light


Each 3350.00 5 16750

MR RA

E-14

Supplying, installation, testing and commissioning of duel tone electronic

hooter suitable for wall mounted complete as required. Nos. 6310.00 5 31550

MR RA

E-15

Supplying, installation, testing and commissioning of manual call box in

suitable enclosure with arrangement to raise the alarm when the glass is

manually broken complete as required.

Nos. 5720.00 5 28600

MR

Supplying, installation, testing and commissioning of microprocessor. based

main fire alarm control panel of 4 zone capacity as complete with batteries,

battery charger illuminated numeric digram complete as required.No. 30500.00 2 61000

88700

For One Block 1727967 1926800

3654767

For 03 barracks = (3654767 x 03 =10964301) 10964301

Total

Total=

Grand Total=

S.NO DSR ITEM NO. DESCRIPTION QTY UNIT RATE AMOUNT

DSR 2014

AMOUNT NS

SUB-HEAD I: INTERNAL WIRING

All wiring Item FRLS including provision of conduit, conduit

accsories , circuit wiring, switch, box and all fitting completed

as required.

1 (1.10.3) Wiring for light point / fan point /exhaust fan point/ call bell

point with 1.5 sq.mm FRLS PVC insulated copper conductor

single core cable in surface / recessed medium class PVC

Conduit, with modular switch,modular plate ,suitable GI Box

and earthing the point with 1.5 sq.mm FRLS PVC insulated

copper conductor single core cable etc. as required.

a) Group C 196 Point 718.00 140728.00

2 -1.11 Wiring for twin control light point with 1.5 sq.mm FRLS PVC

insulated copper condutor single core cable in surface /

recessed PVC conduit 2 way modular switch,modular

plate,suitable GI box and earthing the point with 1.5 sq.mm

.FRLS PVC insulated copper conductor single core cable etc as

required.

6 Point 770.00 4620.00

3 -1.12 Wiring for light /power plug with 2x4 sq.mm FRLS PVC insulated

copper conductor single core cable in surface /recessed PVC

conduit along with 1 No 4 sq.mm FRLS PVC insulated copper

conductor single core cable for loop earthing as required.

1800 Meter 162.00 291600.00

Detailed Estimate for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)

INTERNAL INSTALLATION ELECTRICAL WORK FOR GOS MESS

Page 1





60 Meter 275.00 16500.00

5 Wiring for circuit/submain wiring alongwith earth wire with the

following sizes of FR PVC insulated copper conductor single core

cable in surface/recessed PVC Conduit as required.

(i) (1.14.1) 2x1.5 sq.mm + 1x1.5 sq.mm earth wire 800 Meter 106.00 84800.00

(ii) (1.14.2) 2x2.5 sq.mm + 1 x 2.5 sq.mm earth wire 1000 Meter 131.00 131000.00

(iii) (1.14.3) 2 x 4 sq.mm + 1 x 4 sq.mm earth wire 120 Meter 162.00 19440.00

(iv) (1.14.4) 2x6 sq.mm + 1x6 sq.mm earth wire 60 Meter 221.00 13260.00

(v) (1.14.10) 4x10 sq.mm + 2x10 sq.mm earth wire. 60 Meter 597.00 35820.00

(vi) (1.14.11) 4x16 sq.mm + 2x16 sq.mm earth wire 80 Meter 883.00 70640.00

5 (1.31) Supplying and fixing suitable size GI box with modular plate

and cover in front on surface or in recess, including providing

and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps

modular switch ,connection etc as required.

55 Each 276.00 15180.00

6 (1.32) Supplying and fixing suitable size GI box with modular plate and

cover in front on surface or in recess including providing and

fixing 6 pin 15/16 and 5/6 amps modular socket outlet with

shulter and 15/16 amps modular switch connection, etc as

required.

29 Each 303.00 8787.00

7 Supplying and fixing of following sizes of medium class PVC

conduit along with acessories in surface/recess including

cutting the wall and making good the same in case of recessed

conduit as required.

Page 2

(i) (1.21.2) 25 mm 500 Meter 65.00 32500.00

(ii) (1.21.3) 32 mm 300 Meter 85.00 25500.00

9 (2.18) Supplying and fixing 20 amps, 240 volts SPN industrial type,

socket outlet with 2 pole and earth metal enclosed plug top

along with 20 amps 'C' Curve, SP, MCB in sheet steel encloser

on surface or in recess with chained metal cover for the socket

outlet and complete with conncections, testing &

commissioning etc as required.

5 Each 868.00 4340.00


DSR 2014

AMOUNT NS

10 (2.20) Supplying and fixing 30 amps, 415 volts TPN industrial type,


along with 30 amps 'C' Curve, TP, MCB in sheet steel encloser




2 Each 2473.00 4946.00

11 (NS) Supplying & fixing 75mm x 75mm x 10 mm zinc passivated box

with mould cord outlet complete with RJ 45 sockets as required

for computer data point. 5 Each 450.00 2250.00

12 (NS) Supplying & laying CAT 6 for LAN wiring in PVC conduit / Cable

Tray complete as required. 100 Each 70.00 7000.00

SUB-HEAD I TOTAL NS: Rs. 9250.00

SUB-HEAD I TOTAL DSR : Rs. 899661.00

Page 3


DSR 2014

AMOUNT NS

SUB-HEAD II:- DISTRIBUTION BOARDS

1 (2.8) Supplying and fixing following way prewired TP & N, MCB

distribution board of sheet steel for 415 volts on surface /recess

complete with loose wire box, terminal connectors for all

incoming and outgoing circuits, duly prewired with suitable size

FRLS PVC insulated copper condutor up to terminal blocks,

tinned copper bus bar, neutral link, earth bar, din bar,

detachable gland plate, interconnections, powder painted

including earthing etc. as required. (But without

MCB/RCCB/Isoltor).

(2.8.5) 4 way (4+12) Double door 1 Each 7357.00 7357.00



2 (2.7) Supplying and fixing following way, single pole and neutral,

prewired, sheet steel, MCB distribution board, 240 volts, on

surface /recess, complete with loose wire box, terminal blocks,

duly prewired with suitable size FRLS PVC insulated copper

condutor upto terminal blocks, tinned copper bus bar, neutral

link, earth bus, din bar, detachable gland plate,

interconnections, powder painted including earthing etc as

required. (But without MCB/RCCB/Isolator)

(2.7.5) 2+8/10 Way, Double door 4 Each 2508.00 10032.00

4 Supply and fixing 5 amps to 32 amps rating.240/415 volts.'C'

curve miniature circuit breaker suitable for inductive load of

following poles in the existing MCB DB complete with

connections,testing and commisioning etc.as required

(2.10.1) a) Single pole 64 Each 169.00 10816.00

Page 4

5 2.12 Supply and fixing following rating,double pole,240 volts,MCB in

the existing MCB DB complete with connection ,testing and


(2.12.1) a) 40 amps 1 Each 218.00 218.00

6 Supply and fixing following rating,four pole,415 volts,MCB in



(2.13.2) a) 63 amps 3 Each 670.00 2010.00

7 Supply and fixing following rating,double pole (single phase and

neutral),240 volts,RCCB having a sensitivity current upto 300

amp in the existing MCB DB complete with connection ,testing

and commissioning etc. as required.

(2.14.1) a) 25 amps 4 Each 1645.00 6580.00

(2.14.2) a) 40 amps 6 Each 1714.00 10284.00

SUB-HEAD II TOTAL NS: Rs. 0.00

SUB-HEAD II TOTAL DSR : Rs. 59841.00

Page 5


DSR 2014

AMOUNT NS

SUB-HEAD III :- WIRING FOR TELEPHONE & TV POINTS

1 Supplying and fixing of following size/modules, GI box along

with modular base & cover plate for modular switches in recess

etc as required.

(1.27.1) a) 75 mm x 75 mm x 60 mm deep 37 Each 166.00 6142.00

2 Supplying and drawing following pair, 0.5.mm dia FR PVC

insulated annealed copper conductor, unarmoured telephone

cable in the existing surface/ recessed steel/ PVC conduit as

required.

a) (1.18.2) 2 Pair 200 Meter 18.00 3600.00

3 (1.19) Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm

solid copper conductor PE insulated, shielded with fine tinned

copper braid and protected with PVC sheath in the existing


100 Meter 28.00 2800.00

4 Supplying and fixing following modular switch/ socket on the

existing modular plate and switch box including connections

but excluding plate etc .as required.

(1.24.6) a) Telephone socket outlet 8 Each 95.00 760.00

(1.24.7) a) TV socket outlet 9 Each 94.00 846.00

5 Supplying and fixing of the following sheet steel clad wall /

recess mounting telephone tag blocks of krone make

constructed from 14 SWG sheet steel finished with red oxide

coating of two coats of paint with hinged gasketted powder

coated door and complete.

Page 6

(NS) a) 10 pairs 1 Each 1500.00 1500.00

(NS) b) 20 pairs 1 Each 2500.00 2500.00

SUB-HEAD III TOTAL NS: Rs. 4000.00

SUB-HEAD III TOTAL DSR : Rs. 14148.00


DSR 2014

AMOUNT NS

SUB-HEAD IV:- EARTHING

1 (5.4) Earthing with G.I earth plate 600 mm x 600 mm x 6 mm thick

including accessories and providing masonary enclosure with

cover plate having locking arrangement and watering pipe of

2.7 mtr long etc. with charoal or coke and salt as required.

2 Set 4490.00 8980.00

2 (5.9) Supplying and laying 25 mm x 5 mm G.I. strip at 0.50 meter

below ground as strip earth electrode , including

connection/terminating with G.I. nut, bolt, spring, washer etc.

as required. 200 Meter 109.00 21800.00

3 (5.11) Providing & fixing 25mm x 5mm GI Strip in 40mm dia GI pipe

from earth elecrode including connections with GI nut, bolt,

spring, washer excavation and re-fiiling etc. as required.

75 Meter 421.00 31575.00

SUB-HEAD IV NS TOTAL:- Rs.

SUB-HEAD IV DSR TOTAL:- Rs. 62355.00

Page 7


DSR 2014

AMOUNT NS

SUB-HEAD V:- LIGHTING FIXTURE AND FANS & WATER COOLERS

1 (NS) Supplying of following type recessed / surface mounted

fluorescent light fixture complete with electronic choke

earthing point and with TL-5 / CFL lamps complete as required.

(HAVELLS / BAJAJ / WIPRO)

b) 22W LED (4') 42 Each 3100.00 130200.00

2 (NS) Ceiling Light Point for fall ceiling

b) 8W LED 81 Each 2500.00 202500.00

3 (NS) Supplying of 305 mm 1400 RPM exhaust fan complete with

louver and bird guard screen with 3 core flexible wire as

required. 12 Each 2800.00 33600.00

4 (NS) Supplying of ceiling fan, complete with blades with suitable

length of down rods shackle insulator earthing point including

connection etc . as required.

a) 1200 mm sweep 37 Each 1400.00 51800.00

5 1.41 Installation, testing and commissioning of pre-wired,

fluorescent fitting / compact fluorescent fitting of all types, with

all accessories and tube etc. directly on ceiling/ wall, including

connection with 1.5 sq. mm FR PVC insulated, copper

conductor, single core cable and earthing etc. as required.

24 Each 91.00 2184.00

6 1.44 Installation, testing and commissioning of ceiling fan, including

wiring the down rods of standard length (upto 30 cm) with 1.5

sq. mm FRLS PVC insulated, copper conductor, single core cable

etc. as required. 37 Each 95.00 3515.00

Page 8

7 1.5 Installtion of exhasut fan up to 450 mm sweep in the existing

opening, including making the hole to suit the size of the abvoe

fan, making good the damage, connection testiing and

commissioning etc as requried 12 Each 204.00 2448.00

8 1.51 Extra for fixing the louvers/ shutters complete with frame for a

exhaust fan of all sizes. 12 Each 90.00 1080.00

9 (1.25) Supplying and fixing stepped type electronic fan regulator on

the existing modular plate switch box including connections but

excluding modular plate etc.as required.

37 Each 284.00 10508.00

10 15.1 Supplying,installing,testing and commissioing of Passive

Infrared (PIR) technology based occupancy sensors having high

performance, non regulating programmable type suitable for

connected load upto 10 amp, for mounting height upto 2.8mtr

and for 5 meter diameter covergae along with necessary fixing

arrnagements i/c programming at site etc. complete as

required. (In toilets only)

Each 3173.00 0.00

11 MR Water Coolers 12 Each 15000.00 180000.00

12 MR AIR Coolers 12 Each 10000.00 120000.00

SUB-HEAD V NS TOTAL:- Rs. 718100.00

SUB-HEAD V DSR TOTAL:- Rs. 19735.00

Page 9

S.NO DESCRIPTION DSR 2014 NS

1 SUB-HEAD I: INTERNAL WIRING 899661.00 9250.00

2 SUB-HEAD II:- DISTRIBUTION BOARDS 59841.00 0.00

3 SUB-HEAD III :- WIRING FOR TELEPHONE & TV 14148.00 4000.00

4 SUB-HEAD IV:- EARTHING 62355.00 0.00

5 SUB-HEAD V:- LIGHT FIXTURES & FANS 19735.00 718100.00

1055740.00 731350.00

TOTAL DSR+NS 1787090.00

SUMMARY FOR INTERNAL ELECTRICAL WORKS FOR SOS MESS

NOTE:- PANEL & CABLE HAVE NOT BEEN CONSIDERED IN THIS ESTIMATE

Page 10

S.NO DSR ITEM

NO.

DESCRIPTION QTY UNIT RATE AMOUNT

DSR 2014

AMOUNT NS




as required.







a) Group C 213 Point 718.00 152934.00






required.

9 Point 770.00 6930.00





2500 Meter 162.00 405000.00


INTERNAL INSTALLATION ELECTRICAL WORK FOR SOS MESS

Page 1





80 Meter 275.00 22000.00










5 (1.31) Supplying and fixing suitable size GI box with modular plate

and cover in front on surface or in recess, including providing

and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps


79 Each 276.00 21804.00


cover in front on surface or in recess including providing and

fixing 6 pin 15/16 and 5/6 amps modular socket outlet with

shulter and 15/16 amps modular switch connection, etc as

required.

53 Each 303.00 16059.00


conduit along with acessories in surface/recess including

cutting the wall and making good the same in case of recessed

conduit as required.

Page 2

(i) (1.21.2) 25 mm 600 Meter 65.00 39000.00

(ii) (1.21.3) 32 mm 400 Meter 85.00 34000.00

Page 3

9 (2.18) Supplying and fixing 20 amps, 240 volts SPN industrial type,


along with 20 amps 'C' Curve, SP, MCB in sheet steel encloser




10 Each 868.00 8680.00

S.NO DSR ITEM

NO.


DSR 2014

AMOUNT NS

10 (2.20) Supplying and fixing 30 amps, 415 volts TPN industrial type,


along with 30 amps 'C' Curve, TP, MCB in sheet steel encloser




2 Each 2473.00 4946.00

11 (NS) Supplying & fixing 75mm x 75mm x 10 mm zinc passivated box

with mould cord outlet complete with RJ 45 sockets as required

for computer data point. 5 Each 450.00 2250.00





Page 4

S.NO DSR ITEM

NO.


DSR 2014

AMOUNT NS










MCB/RCCB/Isoltor).

















Page 5





(2.12.1) a) 40 amps 1 Each 218.00 218.00

6 Supply and fixing following rating,four pole,415 volts,MCB in



(2.13.2) a) 63 amps 3 Each 670.00 2010.00





(2.14.1) a) 25 amps 4 Each 1645.00 6580.00

(2.14.2) a) 40 amps 6 Each 1714.00 10284.00



Page 6

S.NO DSR ITEM

NO.


DSR 2014

AMOUNT NS


1 Supplying and fixing of following size/modules, GI box along

with modular base & cover plate for modular switches in recess

etc as required.


2 Supplying and drawing following pair, 0.5.mm dia FR PVC

insulated annealed copper conductor, unarmoured telephone

cable in the existing surface/ recessed steel/ PVC conduit as

required.

a) (1.18.2) 2 Pair 300 Meter 18.00 5400.00

3 (1.19) Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm

solid copper conductor PE insulated, shielded with fine tinned

copper braid and protected with PVC sheath in the existing


200 Meter 28.00 5600.00


existing modular plate and switch box including connections

but excluding plate etc .as required.



5 Supplying and fixing of the following sheet steel clad wall /

recess mounting telephone tag blocks of krone make

constructed from 14 SWG sheet steel finished with red oxide

coating of two coats of paint with hinged gasketted powder

coated door and complete.

(NS) a) 10 pairs 1 Each 1500.00 1500.00

(NS) b) 20 pairs 1 Each 2500.00 2500.00

Page 7



S.NO DSR ITEM

NO.


DSR 2014

AMOUNT NS





2.7 mtr long etc. with charoal or coke and salt as required.

2 Set 4490.00 8980.00







spring, washer excavation and re-fiiling etc. as required.

75 Meter 421.00 31575.00



Page 8

S.NO DSR ITEM

NO.


DSR 2014

AMOUNT NS



fluorescent light fixture complete with electronic choke

earthing point and with TL-5 / CFL lamps complete as required.

(HAVELLS / BAJAJ / WIPRO)

a) 22W LED (4') 45 Each 3100.00 139500.00

b) 18W LED Batton (4') 10 Each 650.00 6500.00

c) 15W LED Downlighter 35 Each 3100.00 108500.00

d) 10W LED Bulkhead 92 Each 1900.00 174800.00

2 (NS) Ceiling Light Point for fall ceiling

b) 8W LED 43 Each 2500.00 107500.00



required. 15 Each 2800.00 42000.00




a) 1200 mm sweep 38 Each 1400.00 53200.00





conductor, single core cable and earthing etc. as required.

51 Each 91.00 4641.00

Page 9








commissioning etc as requried 15 Each 204.00 3060.00





excluding modular plate etc.as required.

38 Each 284.00 10792.00

10 15.1 Supplying,installing,testing and commissioing of Passive

Infrared (PIR) technology based occupancy sensors having high


connected load upto 10 amp, for mounting height upto 2.8mtr

and for 5 meter diameter covergae along with necessary fixing

arrnagements i/c programming at site etc. complete as

required. (In toilets only)

14 Each 3173.00 44422.00

11 MR Water Coolers 2 Each 15000.00 30000.00



Page 10







1364519.00 675250.00




Page 11

S.NO DSR ITEM

NO.

DESCRIPTION QTY UNIT RATE AMOUNT DSR

2014

AMOUNT NS




as required. 1 (1.10.3) Wiring for light point / fan point /exhaust fan point/ call bell point with

1.5 sq.mm FRLS PVC insulated copper conductor single core cable

in surface / recessed medium class PVC Conduit, with modular

switch,modular plate ,suitable GI Box and earthing the point with

1.5 sq.mm FRLS PVC insulated copper conductor single core cable

etc. as required.

a) Group C 225 Point 718.00 161550.00





900 Meter 162.00 145800.00





100 Meter 275.00 27500.00











SCHEDULE OF QUANTITIES FOR INTERNAL INSTALLATION ELECTRICAL WORK FOR MI HOSPITAL


cover in front on surface or in recess, including providing and fixing

3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch

,connection etc as required.

61 Each 276.00 16836.00


cover in front on surface or in recess including providing and fixing

6 pin 15/16 and 5/6 amps modular socket outlet with shulter and

15/16 amps modular switch connection, etc as required.

14 Each 303.00 4242.00


conduit along with acessories in surface/recess including cutting the

wall and making good the same in case of recessed conduit as

required.

(i) (1.21.2) 25 mm 400 Meter 65.00 26000.00

(ii) (1.21.3) 32 mm 250 Meter 85.00 21250.00

8 (2.18) Supplying and fixing 20 amps, 240 volts SPN industrial type, socket

outlet with 2 pole and earth metal enclosed plug top along with 20

amps 'C' Curve, SP, MCB in sheet steel encloser on surface or in

recess with chained metal cover for the socket outlet and complete

with conncections, testing & commissioning etc as required.

5 Each 868.00 4340.00

S.NO DSR ITEM

NO.


2014

AMOUNT NS

9 (2.20) Supplying and fixing 30 amps, 415 volts TPN industrial type, socket

outlet with 4 pole and earth metal enclosed plug top along with 30

amps 'C' Curve, TP, MCB in sheet steel encloser on surface or in

recess with chained metal cover for the socket outlet and complete

with conncections, testing & commissioning etc as required.

2 Each 2473.00 4946.00

10 (NS) Supplying & fixing 75mm x 75mm x 10 mm zinc passivated box with

mould cord outlet complete with RJ 45 sockets as required for

computer data point. 4 Each 450.00 1800.00



12 (NS) Supplying, fixing and commissioning following nos. ways audio

luminious indicators with rest buttons and buzzers mounted in

concealed GI sheet steel enclosure including interconnection

numbering etc. complete as required.

a 12 WAY 1 Each 9000.00 9000.00

b 4 WAY 1 Each 5500.00 5500.00



S.NO DSR ITEM

NO.


2014

AMOUNT NS




complete with loose wire box, terminal connectors for all incoming

and outgoing circuits, duly prewired with suitable size FRLS PVC

insulated copper condutor up to terminal blocks, tinned copper bus

bar, neutral link, earth bar, din bar, detachable gland plate,

interconnections, powder painted including earthing etc. as

required. (But without MCB/RCCB/Isoltor).




prewired, sheet steel, MCB distribution board, 240 volts, on surface

/recess, complete with loose wire box, terminal blocks, duly

prewired with suitable size FRLS PVC insulated copper condutor

upto terminal blocks, tinned copper bus bar, neutral link, earth bus,

din bar, detachable gland plate, interconnections, powder painted

including earthing etc as required. (But without MCB/RCCB/Isolator)


3 2.9 Supplying and fixing following way prewired vertical type 415 volts

TP&N MCB distribution board surface/recssed of sheet steel dust

protected duly powder painted inclusive of 200amps tinned copper

bsu bar common neutral link earth bar din bar for mounting MCB's

terminal connectors for all incoming and outgoing circuits duly

prewired with FRLS PVC insulated copper conductor upto the

trminal connector/ neutral link earthing etc. as required (But without

MCB/MCCB) (Note: VTPN DB is normally used where 3 phase

outlets are required).

2.9.5 4 way double door 1 Each 7901.00 7901.00

4 Supply and fixing 5 amps to 32 amps rating.240/415 volts.'C' curve

miniature circuit breaker suitable for inductive load of following

poles in the existing MCB DB complete with connections,testing

and commisioning etc.as required


(2.10.5) b) Triple pole 11 Each 696.00 7656.00

5 2.12 Supply and fixing following rating,double pole,240 volts,MCB in the

existing MCB DB complete with connection ,testing and


(2.12.1) a) 40 amps 2 Each 218.00 436.00

6 Supply and fixing following rating,four pole,415 volts,MCB in the

existing MCB DB complete with connection ,testing and


(2.13.2) a) 63 amps 2 Each 670.00 1340.00

(2.13.3) b) 100 amps 1 Each 851.00 851.00


neutral),240 volts,RCCB having a sensitivity current upto 300 amp

in the existing MCB DB complete with connection ,testing and


(2.14.1) a) 25 amps 3 Each 1645.00 4935.00

(2.14.2) a) 40 amps 3 Each 1714.00 5142.00



S.NO DSR ITEM

NO.


2014

AMOUNT NS


1 Supplying and fixing of following size/modules, GI box along with

modular base & cover plate for modular switches in recess etc as

required.


2 Supplying and drawing following pair, 0.5.mm dia FR PVC insulated

annealed copper conductor, unarmoured telephone cable in the

existing surface/ recessed steel/ PVC conduit as required.

a) (1.18.2) 2 Pair 200 Meter 18.00 3600.00

3 (1.19) Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid

copper conductor PE insulated, shielded with fine tinned copper

braid and protected with PVC sheath in the existing surface/

recessed steel/ PVC conduit as required.

100 Meter 28.00 2800.00


existing modular plate and switch box including connections but

excluding plate etc .as required.



5 Supplying and fixing of the following sheet steel clad wall / recess

mounting telephone tag blocks of krone make constructed from 14

SWG sheet steel finished with red oxide coating of two coats of

paint with hinged gasketted powder coated door and complete.

(NS) a) 10 pairs 1 Each 1500.00 1500.00

(NS) b) 20 pairs 1 Each 2500.00 2500.00



S.NO DSR ITEM

NO.


2014

AMOUNT NS



including accessories and providing masonary enclosure with cover

plate having locking arrangement and watering pipe of 2.7 mtr long

etc. with charoal or coke and salt as required. 4 Set 4490.00 17960.00

1 (5.6) Earthing with Copper earth plate 600 mm x 600 mm x 3 mm thick

including accessories and providing masonary enclosure with cover

plate having locking arrangement and watering pipe of 2.7 mtr long

etc. with charoal or coke and salt as required. 2 Set 9292.00 18584.00

2 (5.8) Supplying and laying 25 mm x 5 mm Copper strip at 0.50 meter


connection/terminating with G.I. nut, bolt, spring, washer etc. as

required. 100 Meter 753.00 75300.00

2 (5.9) Supplying and laying 25 mm x 5 mm G.I. strip at 0.50 meter below

ground as strip earth electrode , including connection/terminating

with G.I. nut, bolt, spring, washer etc. as required.250 Meter 109.00 27250.00

3 (5.11) Providing & fixing 25mm x 5mm GI Strip in 40mm dia GI pipe from

earth elecrode including connections with GI nut, bolt, spring,

washer excavation and re-fiiling etc. as required. 100 Meter 421.00 42100.00



S.NO DSR ITEM

NO.


2014

AMOUNT NS

SUB-HEAD V:- LIGHTING FIXTURE AND FANS

1 (NS) Supplying of following type recessed / surface mounted fluorescent light


lamps complete as required. (HAVELLS / BAJAJ / WIPRO)

a) 22W LED (4') 50 Each 3100.00 155000.00

b) 15W LED Downlighter 90 Each 3100.00 279000.00

c) 12 W LED (2') 5 Each 2150.00 10750.00

d) 18W LED Batton (4') 20 Each 650.00 13000.00

2 (NS) Supplying of 305 mm 1400 RPM exhaust fan complete with louver

and bird guard screen with 3 core flexible wire as required.21 Each 2800.00 58800.00

3 (NS) Supplying of ceiling fan, complete with blades with suitable length

of down rods shackle insulator earthing point including connection

etc . as required.

a) 1200 mm sweep 34 Each 1400.00 47600.00

(NS) Add cost of AC 9 Each 34000.00 306000.00

(NS) Add cost of Desert Cooler 17 Each 14000.00 238000.00

4 1.41 Installation, testing and commissioning of pre-wired, fluorescent

fitting / compact fluorescent fitting of all types, with all accessories

and tube etc. directly on ceiling/ wall, including connection with 1.5

sq. mm FR PVC insulated, copper conductor, single core cable and

earthing etc. as required. 68 Each 91.00 6188.00


wiring the down rods of standard length (upto 30 cm) with 1.5 sq.

mm FRLS PVC insulated, copper conductor, single core cable etc.

as required. 34 Each 95.00 3230.00


opening, including making the hole to suit the size of the abvoe fan,

making good the damage, connection testiing and commissioning

etc as requried 21 Each 204.00 4284.00



9 (1.25) Supplying and fixing stepped type electronic fan regulator on the

existing modular plate switch box including connections but

excluding modular plate etc.as required. 34 Each 284.00 9656.00

10 15.1 Supplying,installing,testing and commissioing of Passive Infrared

(PIR) technology based occupancy sensors having high


connected load upto 10 amp, for mounting height upto 2.8mtr and

for 5 meter diameter covergae along with necessary fixing

arrnagements i/c programming at site etc. complete as required. (In

toilets only) 5 Each 3173.00 15865.00



S.NO DSR ITEM

NO.


2014

AMOUNT NS

SUB-HEAD VI:- FIRE ALARM SYSTEM

1 (1.17.2) Supplying and drawing of FR PVC insulated copper conductor

single core cable of 2x1.5 sq.mm. in existing conduit as required. 750 Meter 36.00 27000.00

2 (NS) Supplying, installation, testing and commissioning of inteligent

analouge photoelectric optical type smoke detector and mounting

base with LED light complete as required. 60 Each 2950.00 177000.00


analouge photoelectric optical type heat detector and mounting

base with LED light complete as required. 3 Each 2400.00 7200.00

4 (NS) Supplying, installation, testing and commissioning of duel tone

electronic hooter suitable for wall mounted complete as required.3 Nos. 950.00 2850.00

5 (NS) Supplying, installation, testing and commissioning of manual call

box in suitable enclosure with arrangement to raise the alarm when

the glass is manually broken complete as required.3 Nos. 800.00 2400.00

6 (NS) Supplying, installation, testing and commissioning of

microprocessor based addressable main fire alarm control panel of

2 zone capacity as complete with batteries, battery charger

illuminated numeric digram complete as required. 2 No. 75000.00 150000.00

SUB HEAD VI TOTAL:-NS Rs. 339450.00

SUB HEAD VI TOTAL:-DSR Rs. 27000.00






5 SUB-HEAD V:- LIGHT FIXTURES , FANS ,Desert cooler & Acs 41113.00 1108150.00

6 SUB-HEAD VI:- FIRE ALARM 27000.00 339450.00

1098882.00 1488900.00


7

SUMMARY FOR INTERNAL ELECTRICAL WORKS FOR MI HOSPITAL


S.NO DSR ITEM

NO.


2014

AMOUNT NS


All wiring Item FRLS including provision of conduit, conduit accsories , circuit

wiring, switch, box and all fitting completed as required.

1 (1.10.3) Wiring for light point / fan point /exhaust fan point/ call bell point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable in surface /

recessed medium class PVC Conduit, with modular switch,modular plate

,suitable GI Box and earthing the point with 1.5 sq.mm FRLS PVC insulated


a) Group C 700 Point 718.00 502600.00

2 -1.11 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper

condutor single core cable in surface / recessed PVC conduit 2 way modular

switch,modular plate,suitable GI box and earthing the point with 1.5 sq.mm

.FRLS PVC insulated copper conductor single core cable etc as required.

10 Point 770.00 7700.00

3 -1.12 Wiring for light /power plug with 2x4 sq.mm FRLS PVC insulated copper

conductor single core cable in surface /recessed PVC conduit along with 1 No

4 sq.mm FRLS PVC insulated copper conductor single core cable for loop

earthing as required.

2500 Meter 162.00 405000.00

4 -1.13 Wiring for light /power plug with 4x4 sq.mm FRLS PVC insulated copper

conductor single core cable in surface /recessed PVC conduit along with 2 No

4 sq.mm FRLS PVC insulated copper conductor single core cable for loop

earthing as required.

500 Meter 275.00 137500.00

5 Wiring for circuit/submain wiring alongwith earth wire with the following sizes

of FR PVC insulated copper conductor single core cable in surface/recessed

PVC Conduit as required.


BOQ and Estimate of ADMIN BLOCK for internal electrical installation







5 (1.31) Supplying and fixing suitable size GI box with modular plate and cover in front

on surface or in recess, including providing and fixing 3 pin 5/6 amps modular

socket outlet and 5/6 amps modular switch ,connection etc as required.

216 Each 276.00 59616.00

6 (1.32) Supplying and fixing suitable size GI box with modular plate and cover in front

on surface or in recess including providing and fixing 6 pin 15/16 and 5/6

amps modular socket outlet with shulter and 15/16 amps modular switch

connection, etc as required.

114 Each 303.00 34542.00

7 Supplying and fixing of following sizes of medium class PVC conduit along with

acessories in surface/recess including cutting the wall and making good the

same in case of recessed conduit as required.

(i) (1.21.2) 25 mm 2000 Meter 65.00 130000.00

(ii) (1.21.3) 32 mm 500 Meter 85.00 42500.00

9 (2.18) Supplying and fixing 20 amps, 240 volts SPN industrial type, socket outlet with

2 pole and earth metal enclosed plug top along with 20 amps 'C' Curve, SP,

MCB in sheet steel encloser on surface or in recess with chained metal cover

for the socket outlet and complete with conncections, testing &


25 Each 868.00 21700.00

S.NO DSR ITEM

NO.


2014

AMOUNT NS

10 (2.20) Supplying and fixing 30 amps, 415 volts TPN industrial type, socket outlet with

4 pole and earth metal enclosed plug top along with 30 amps 'C' Curve, TP,

MCB in sheet steel encloser on surface or in recess with chained metal cover

for the socket outlet and complete with conncections, testing &


3 Each 2473.00 7419.00

11 (NS) Supplying & fixing 75mm x 75mm x 10 mm zinc passivated box with mould

cord outlet complete with RJ 45 sockets as required for computer data point.

50 Each 450.00 22500.00

12 (NS) Supplying & laying CAT 6 for LAN wiring in PVC conduit / Cable Tray complete

as required. 1200 Each 70.00 84000.00



S.NO DSR ITEM

NO.


2014

AMOUNT NS


1 (2.8) Supplying and fixing following way prewired TP & N, MCB distribution board of

sheet steel for 415 volts on surface /recess complete with loose wire box,

terminal connectors for all incoming and outgoing circuits, duly prewired with

suitable size FRLS PVC insulated copper condutor up to terminal blocks, tinned

copper bus bar, neutral link, earth bar, din bar, detachable gland plate,

interconnections, powder painted including earthing etc. as required. (But

without MCB/RCCB/Isoltor).




2 (2.7) Supplying and fixing following way, single pole and neutral, prewired, sheet

steel, MCB distribution board, 240 volts, on surface /recess, complete with

loose wire box, terminal blocks, duly prewired with suitable size FRLS PVC

insulated copper condutor upto terminal blocks, tinned copper bus bar,

neutral link, earth bus, din bar, detachable gland plate, interconnections,

powder painted including earthing etc as required. (But without

MCB/RCCB/Isolator)

(2.7.5) 2 + 8/10 way, Double door 5 Each 2995.00 14975.00

3 2.9 Supplying and fixing following way prewired vertical type 415 volts TP&N MCB

distribution board surface/recssed of sheet steel dust protected duly powder

painted inclusive of 200amps tinned copper bsu bar common neutral link

earth bar din bar for mounting MCB's terminal connectors for all incoming and

outgoing circuits duly prewired with FRLS PVC insulated copper conductor

upto the trminal connector/ neutral link earthing etc. as required (But without

MCB/MCCB) (Note: VTPN DB is normally used where 3 phase outlets are

required).

2.9.5 4 way double door 2 Each 7901.00 15802.00

4 Supply and fixing 5 amps to 32 amps rating.240/415 volts.'C' curve miniature

circuit breaker suitable for inductive load of following poles in the existing

MCB DB complete with connections,testing and commisioning etc.as required


(2.10.5) b) Triple pole 49 Each 696.00 34104.00

5 2.12 Supply and fixing following rating,double pole,240 volts,MCB in the existing

MCB DB complete with connection ,testing and commissioning etc. as

required.

(2.12.1) a) 40 amps 5 Each 218.00 1090.00

6 Supply and fixing following rating,four pole,415 volts,MCB in the existing MCB

DB complete with connection ,testing and commissioning etc. as required.

(2.13.2) a) 63 amps 10 Each 670.00 6700.00

(2.13.3) b) 100 amps 5 Each 851.00 4255.00

7 Supply and fixing following rating,double pole (single phase and neutral),240

volts,RCCB having a sensitivity current upto 300 amp in the existing MCB DB

complete with connection ,testing and commissioning etc. as required.

(2.14.1) a) 25 amps 8 Each 1645.00 13160.00

(2.14.2) a) 40 amps 25 Each 1714.00 42850.00



S.NO DSR ITEM

NO.


2014

AMOUNT NS


1 Supplying and fixing of following size/modules, GI box along with modular

base & cover plate for modular switches in recess etc as required.


2 Supplying and drawing following pair, 0.5.mm dia FR PVC insulated annealed

copper conductor, unarmoured telephone cable in the existing surface/


a) (1.18.2) 2 Pair 750 Meter 18.00 13500.00

3 (1.19) Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper

conductor PE insulated, shielded with fine tinned copper braid and protected

with PVC sheath in the existing surface/ recessed steel/ PVC conduit as

required.

150 Meter 28.00 4200.00

4 Supplying and fixing following modular switch/ socket on the existing modular

plate and switch box including connections but excluding plate etc .as

required.



5 Supplying and fixing of the following sheet steel clad wall / recess mounting

telephone tag blocks of krone make constructed from 14 SWG sheet steel

finished with red oxide coating of two coats of paint with hinged gasketted

powder coated door and complete.

(NS) a) 10 pairs 5 Each 1500.00 7500.00

(NS) b) 20 pairs 5 Each 2500.00 12500.00

(NS) c) 50 pairs 3 Each 5000.00 15000.00



S.NO DSR ITEM

NO.


2014

AMOUNT NS


1 (5.4) Earthing with G.I earth plate 600 mm x 600 mm x 6 mm thick including

accessories and providing masonary enclosure with cover plate having locking

arrangement and watering pipe of 2.7 mtr long etc. with charoal or coke and

salt as required. 4 Set 4490.00 17960.00

1 (5.6) Earthing with Copper earth plate 600 mm x 600 mm x 3 mm thick including

accessories and providing masonary enclosure with cover plate having locking

arrangement and watering pipe of 2.7 mtr long etc. with charoal or coke and

salt as required. 2 Set 9292.00 18584.00

2 (5.8) Supplying and laying 25 mm x 5 mm Copper strip at 0.50 meter below ground

as strip earth electrode , including connection/terminating with G.I. nut, bolt,

spring, washer etc. as required.

200 Meter 753.00 150600.00

2 (5.9) Supplying and laying 25 mm x 5 mm G.I. strip at 0.50 meter below ground as

strip earth electrode , including connection/terminating with G.I. nut, bolt,

spring, washer etc. as required. 400 Meter 109.00 43600.00

3 (5.11) Providing & fixing 25mm x 5mm GI Strip in 40mm dia GI pipe from earth

elecrode including connections with GI nut, bolt, spring, washer excavation

and re-fiiling etc. as required. 150 Meter 421.00 63150.00



S.NO DSR ITEM

NO.


2014

AMOUNT NS

SUB-HEAD V:- LIGHTING FIXTURE AND FANS

1 (NS) Supplying of following type recessed / surface mounted fluorescent light


lamps complete as required. (HAVELLS / BAJAJ / WIPRO)

a) 22W LED (4') 270 Each 3100.00 837000.00

b) 15W CFL Downlighter 200 Each 3100.00 620000.00

c) 18W LED (2') 15 Each 2150.00 32250.00

d) 10W LED bulkhead 10 Each 1900.00 19000.00

2 (NS) Supplying of 305 mm 1400 RPM exhaust fan complete with louver and bird

guard screen with 3 core flexible wire as required. 21 Each 2800.00 58800.00

3 (NS) Supplying of ceiling fan, complete with blades with suitable length of down

rods shackle insulator earthing point including connection etc . as required.

a) 1200 mm sweep 117 Each 1400.00 163800.00

(NS) AC 4 Each 39000.00 156000.00

(NS) Desert Cooler 73 Each 14000.00 1022000.00

4 1.41 Installation, testing and commissioning of pre-wired, fluorescent fitting /

compact fluorescent fitting of all types, with all accessories and tube etc.

directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC

insulated, copper conductor, single core cable and earthing etc. as required.

495 Each 91.00 45045.00

5 1.44 Installation, testing and commissioning of ceiling fan, including wiring the

down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC

insulated, copper conductor, single core cable etc. as required.

117 Each 95.00 11115.00

6 1.5 Installtion of exhasut fan up to 450 mm sweep in the existing opening,

including making the hole to suit the size of the abvoe fan, making good the

damage, connection testiing and commissioning etc as requried

21 Each 204.00 4284.00

7 1.51 Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of

all sizes. 21 Each 90.00 1890.00

9 (1.25) Supplying and fixing stepped type electronic fan regulator on the existing

modular plate switch box including connections but excluding modular plate

etc.as required. 117 Each 284.00 33228.00

10 15.1 Supplying,installing,testing and commissioing of Passive Infrared (PIR)

technology based occupancy sensors having high performance, non regulating

programmable type suitable for connected load upto 10 amp, for mounting

height upto 2.8mtr and for 5 meter diameter covergae along with necessary

fixing arrnagements i/c programming at site etc. complete as required. (In

toilets only)

15 Each 3173.00 47595.00



S.NO DSR ITEM

NO.


2014

AMOUNT NS


1 (1.17.2) Supplying and drawing of FR PVC insulated copper conductor single core cable

of 2x1.5 sq.mm. in existing conduit as required. 2000 Meter 36.00 72000.00

2 (NS) Supplying, installation, testing and commissioning of inteligent analouge

photoelectric optical type smoke detector and mounting base with LED light

complete as required. 180 Each 2950.00 531000.00

3 (NS) Supplying, installation, testing and commissioning of inteligent analouge

photoelectric optical type heat detector and mounting base with LED light

complete as required. 10 Each 2400.00 24000.00

4 (NS) Supplying, installation, testing and commissioning of duel tone electronic

hooter suitable for wall mounted complete as required. 15 Nos. 950.00 14250.00

5 (NS) Supplying, installation, testing and commissioning of manual call box in

suitable enclosure with arrangement to raise the alarm when the glass is

manually broken complete as required. 15 Nos. 800.00 12000.00

6 (NS) Supplying, installation, testing and commissioning of microprocessor based

addressable main fire alarm control panel of 4 zone capacity as complete with

batteries, battery charger illuminated numeric digram complete as required.

5 No. 125000.00 625000.00



S.NO DSR ITEM

NO.


2014

AMOUNT NS

SUB-HEAD VII:- LIGHTING CONDUCTOR

1 (6.1)Providing and fixing of lighting conductor finial, made of 25mm dia 300 mm

long, copper tube, having single prong at top , with 85mm dia 3 mm thick

copper base plate including holes etc. complete as required.2 Each 764.00 1528.00

2 (6.4) Jointing copper / G.I tape (with another copper / G.I tape, base of the finial or

any other metallic object) by riveting / nut bolting/ sweating and soldering etc

as required. 2 Each 72.00 144.00

3 (6.7) Providing and fixing G.I tape 20 mm X 3 mm on parapet or surface of wall for

lighting conductor compete as required.(for horizontal run). 600 Meter 68.00 40800.00

4 (6.10) Providing and fixing G.I tape 20 mm X 3 mm on parapet or surface of wall for

lighting conductor compete as required.(for vertical run). 300 Meter 72.00 21600.00

5 (6.12) Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125

mm long. With 4 nos of tinned brass bolts, nuts, check nuts and spring

washers etc. complete as required. 5 Each 71.00 355.00

6 (6.14) Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in

ground as required. 250 Meter 141.00 35250.00

SUB HEAD VI TOTAL:-NS Rs.







5 SUB-HEAD V:- LIGHT FIXTURES & FANA 143157.00 2908850.00

6 SUB-HEAD VI:- FIRE ALARM 72000.00 1206250.00

7 SUB-HEAD VII:- LIGHTNING CONDUCTOR 99677.00 0.00

2983394.00 4256600.00


SUMMARY FOR INTERNAL ELECTRICAL WORKS FOR ADMIN. BLOCK


S.NO DSR ITEM

NO.


2014

AMOUNT NS




as required.







a) Group C 24 Point 718.00 17232.00






required.

2 Point 770.00 1540.00





160 Meter 162.00 25920.00





5 Meter 275.00 1375.00


INTERNAL INSTALLATION ELECTRICAL WORK FOR BIIN TYPE MAGAZINE

Page 1











cover in front on surface or in recess, including providing and

fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps


8 Each 276.00 2208.00


conduit along with acessories in surface/recess including cutting

the wall and making good the same in case of recessed conduit

as required.

(i) (1.21.2) 25 mm 45 Meter 65.00 2925.00

(ii) (1.21.3) 32 mm 35 Meter 85.00 2975.00


Page 2

S.NO DSR ITEM

NO.


2014

AMOUNT NS










MCB/RCCB/Isoltor).

















Page 3




(2.12.1) a) 40 amps 1 Each 218.00 218.00





(2.14.1) a) 25 amps 2 Each 1645.00 3290.00

SUB-HEAD II TOTAL NS: Rs.


S.NO DSR ITEM

NO.


2014

AMOUNT NS





2.7 mtr long etc. with charoal or coke and salt as required.1 Set 4490.00 4490.00







spring, washer excavation and re-fiiling etc. as required.20 Meter 421.00 8420.00



Page 4

S.NO DSR ITEM

NO.


2014

AMOUNT NS



fluorescent light fixture complete with electronic choke earthing

point and with TL-5 / CFL lamps complete as required. (HAVELLS

/ BAJAJ / WIPRO)

b) 22W LED (4') 8 Each 3100.00 24800.00



required. 2 Each 2800.00 5600.00




a) 1200 mm sweep 2 Each 1400.00 2800.00





conductor, single core cable and earthing etc. as required.12 Each 91.00 1092.00





Page 5




commissioning etc as requried2 Each 204.00 408.00





excluding modular plate etc.as required.2 Each 284.00 568.00




1 (1.17.2) Supplying and drawing of FR PVC insulated copper conductor

single core cable of 2x1.5 sq.mm. in existing conduit as

required. 500 Meter 36.00 18000.00


analouge photoelectric optical type smoke detector and

mounting base with LED light complete as required.50 Each 2950.00 147500.00


analouge photoelectric optical type heat detector and

mounting base with LED light complete as required.4 Each 2400.00 9600.00

4 (NS) Supplying, installation, testing and commissioning of duel tone

electronic hooter suitable for wall mounted complete as

required. 4 Nos. 950.00 3800.00

Page 6

5 (NS) Supplying, installation, testing and commissioning of manual call

box in suitable enclosure with arrangement to raise the alarm

when the glass is manually broken complete as required.4 Nos. 800.00 3200.00

6 (NS) Supplying, installation, testing and commissioning of

microprocessor based addressable main fire alarm control

panel of 4 zone capacity as complete with batteries, battery

charger illuminated numeric digram complete as required.1 No. 125000.00 125000.00








4 SUB-HEAD VI:- FIRE ALARM SYSTEM 18000.00 289100.00

170764.00 322300.00




Page 7

DSR

Item

no.

Description Unit Rate (in Rs.) GF FF SF TF Total Total Amount Total Amount

DSR N.DSR

1.10




surface / recessed medium class PVC conduit,

with modular switch, modular plate, suitable GI

box and earthing the point with 1.5 sq.mm. FR


etc as required.

1.10.1 Group A Point

518.00 352 1,82,336.00

Light

point

#REF! #REF! #REF!

0.00

0.00

0.00

0.00

585.00 66 66 66 66 264 1,54,440.00

0.00

585.00 94 54,990.00

585.00 25 14,625.00

Fan point 0.00

#REF! #REF! #REF!

Detailed Estimate for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P) (Residential Block - Type - II) ANNEX-4B :Estimate for providing internal Electrical installation in barracks to be constructed in ITBP Chittur (AP)


Page 1 of 10

585.00 16 16 16 16 64 37,440.00

0.00

585.00 24 14,040.00

585.00 7 4,095.00

exhaust

point

#REF! #REF! #REF!

0.00

585.00 16 9,360.00

585.00 4 2,340.00

585.00 12 12 12 12 48 28,080.00

0.00

585.00 16 9,360.00

585.00 4 2,340.00

(1.10.3)

1.11

Wiring for twin control light point with 1.5 sq.mm

FR PVC insulated copper conductor single core

cable in surface / recessed medium class PVC

conduit, 2 way modular switch, modular plate,

suitable GI box and earthing the point with 1.5

sq.mm. FR PVC insulated copper conductor single


Point 770.00 8.00 8.00 8.00 8.00 32 24,640.00


Page 2 of 10

1.14

Wiring for circuit/ submain wiring alongwith earth

wire with the following sizes of FRLS PVC


surface/ recessed medium class PVC conduit as

required1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 221.00 50 50 11,050.00

1.14.10 4 X 10 sq. mm + 2 X 10 sq. mm earth wire Mtr. 597 30.00 40.00 50.00 60.00 180 1,07,460.00

1.17 Supplying and drawing following sizes of FR PVC


the existing surface/ recessed steel/ PVC conduit

as required.1.17.2 2 x 1.5 sq. mm Metre 36.00 110.00 110.00 110.00 110.00 440 15,840.00

1.17.3 3 x 1.5 sq. mm Metre 50.00 60.00 60.00 60.00 60.00 240 12,000.00

1.17.11 3 x 2.5 sq. mm Metre 75.00 160.00 160.00 160.00 160.00 640 48,000.00

1.17.21 3 x 4 sq. mm Metre 109.00 310.00 310.00 310.00 310.00 1240 1,35,160.00

1.18 Supplying and drawing following pair 0.5 sq mm

FR PVC insulated annealed copper conductor,

unarmored telephone cable in the existing


1.18.2 2 Pair Metre 18.00 60.00 20.00 20.00 20.00 120 2,160.00

1.19



insulated, shielded with fine tinned copper braid

and protected with PVC sheath in the existing


Mtr. 28 120.00 100.00 100.00 100.00 420 11,760.00

1.21

Supplying and fixing of following sizes of medium

class PVC conduit along with accessories in

surface/recess including cutting the wall and

making good the same in case of recessed conduit

as required.

1.21.1 20 mm Mtr. 53 100.00 100.00 100.00 100.00 400 21,200.00

1.21.2 25 mm Mtr. 65 300.00 300.00 300.00 300.00 1200 78,000.00

1.21.3 32 mm Metre 85.00 50.00 50.00 50.00 50.00 200 17,000.00

1.24 Supplying and fixing following modular switch/

socket on the existing modular plate & switch box


etc. as required.

Page 3 of 10

1.24.6 Telephone socket outlet Each 95.00 4 4 4 4 16 1,520.00

1.24.7 TV antenna socket outlet Each 94.00 12.00 12.00 12.00 12.00 48 4,512.00

1.25

Supplying and fixing stepped type electronic fan

regulator on the existing modular plate switch box


etc. as required.

Each 284.00 16 16 16 16 64 18,176.00

1.26

Supplying and fixing modular blanking plate on

the existing modular plate & switch box excluding

modular plate as required.

Each 23.00 29.00 29.00 29.00 29.00 116 2,668.00

1.27 Supplying and fixing following size/ modules, GI

box alongwith modular base & cover plate for

modular switches in recess etc as required.

1.27.1 1 or 2 Module (75mmX75mm) Each 166.00 4.00 4.00 4.00 4.00 16 2,656.00

1.31



recess, including providing and fixing 3 pin 5/6

amps modular socket outlet and 5/6 amps

modular switch, connection etc. as required. (For

light plugs to be used in non residential buildings).

Each 303.00 44.00 44.00 44.00 44.00 176 53,328.00

1.32



recess, including providing and fixing 6 pin 5/6 &

15/16 amps modular socket outlet and 15/16

amps modular switch, connection etc. as

required.

Each 395.00 36.00 36.00 36.00 36.00 144 56,880.00

1.34Supplying and fixing brass batten/ angle holder

including connection etc. as required.Each 74.00 50 50 50 50 200 14,800.00

1.38 Supplying and fixing call bell/ buzzer suitable for

single phase, 230 volts, complete as required.

Each 61 4 4 4 4 16 976.00

Page 4 of 10

1.41


wired, fluorescent fitting / compact fluorescent

fitting/ LED of all types, complete with all

accessories and tube etc. directly on ceiling/ wall,

including connection with 1.5 sq. mm FRLS PVC

insulated, copper conductor, single core cable and


Each 91 16 16 16 16 64 5,824.00

1.45

Installation, testing and commissioning of ceiling



insulated, copper conductor, single core cable,

including providing and fixing phenolic laminated

sheet cover on the fan box etc. as required.

Each 122 16.00 16.00 16.00 16.00 64 7,808.00

1.50Installation of exhaust fan in the existing opening,

including making good the damage, connection,

testing, commissioning etc. as required.

1.50.1 Upto 450 mm sweep Each 204 12.00 12 12 12 48 9,792.00

1.51Extra for fixing the louvers/ shutters complete

with frame for a exhaust fan of all sizes.Each 90.00 12.00 12 12 12 48 4,320.00

2.7 Supplying and fixing following way prewired SP&N

MCB distribution board of steel sheet for 240

volts on surface/ recess complete with loose wire

box, terminal connectors for all incoming and

outgoing circuits, duly prewired with suitable size

FR PVC insulated copper conductor up to terminal

blocks, tinned copper bus bar, neutral link, earth

bar, din bar, detachable gland plate,

interconnections, powder painted including

earthing etc. as required. (But without MCB/

RCCB/ Isolator)

2.7.5 2 + 8 way, Double door Each 2995.00 4.00 4 11,980.00

Page 5 of 10

2.8 Supplying and fixing following way prewired TP&N

MCB distribution board of steel sheet for 415

volts on surface/ recess complete with loose wire

box, terminal connectors for all incoming and

outgoing circuits, duly prewired with suitable size

FR PVC insulated copper conductor up to terminal

blocks, tinned copper bus bar, neutral link, earth

bar, din bar, detachable gland plate,


earthing etc. as required.(But without MCB/

RCCB/ Isolator)

2.8.7 8 way (4 + 24), Double door Each 10405 4 4.00 4.00 4.00 16 1,66,480.00

2.8.8 12 way (4 + 36), Double door Each 12782 4.00 4.00 4.00 4.00 16 2,04,512.00

2.10

Supplying and fixing 5 amps to 32 amps rating,

240/415 volts, "C" curve, miniature circuit breaker

suitable for inductive load of following poles in

the existing MCB DB complete with connections,


2.10.1 Single pole Each 169 80.00 80.00 80.00 80.00 320 54,080.00

2.12 Supplying and fixing following rating, double pole,

240 volts, isolator in the existing MCB DB



2.12.1 40 amps Each 218 4.00 4 872.00

2.13

Supplying and fixing following rating, four pole,

415 volts, isolator MCB in the existing MCB DB


commissioning etc. as required.2.13.2 63 amps Each 670 4.00 4.00 4.00 4.00 16 10,720.00

2.14

Supplying and fixing following rating, double pole,

(single phase and neutral), 240 volts, residual

current circuit breaker (RCCB), having a sensitivity

current upto 300 milliamperes in the existing MCB



2.14.3 63 amps Each 2237 4.00 4.00 4.00 4.00 16 35,792.00

Page 6 of 10

2.18



earth, metal enclosed plug top alongwith 20 amps

"C" curve, SP, MCB, in sheet steel enclosure, on

surface or in recess, with chained metal cover for

the socket out let and complete with connections,


Each 954 4.00 4 3,816.00

5.4

Earthing with G.I. earth plate 600 mm X 600 mm X

6 mm thick including accessories, and providing

masonry enclosure with cover plate having

locking arrangement and watering pipe of 2.7

metre long etc. with charcoal/ coke and salt as

required.

Set 4490 4.00 4 17,960.00

5.9

Supplying and laying 25 mm X 5 mm G.I strip at

0.50 metre below ground as strip earth electrode,

including connection/ terminating with G.I. nut,

bolt, spring, washer etc. as required. (Jointing

shall be done by overlapping and with 2 sets of

G.I. nut bolt & spring washer spaced at 50mm)

Metre 109.00 30.00 30 3,270.00

5.11

Providing and fixing 25 mm X 5 mm G.I. strip in 40

mm dia G.I. pipe from earth electrode including

connection with G.I. nut, bolt, spring, washer


Metre 421.00 50.00 50 21,050.00

6.2

Providing and fixing of lightning conductor finial,

made of 25 mm dia 300 mm long, G.I. tube,

having single prong at top, with 85 mm dia 6 mm

thick G.I. base plate including holes etc. complete

as required.

Each 369.00 2.00 2 738.00

6.7



conductor complete as required.(For horizontal

run)

Metre 68.00 120.00 120 8,160.00

6.8



conductor complete as required.(For vertical run)

Metre 98.00 40.00 40 3,920.00

Page 7 of 10

6.12 Providing and fixing testing joint made of 20mm x

3mm thick GI strip, 125mm long with 4 Nos. GI

bolts,nuts,chuck nuts and spring washers etc.

complete as required. (6.12)

Nos. 71.00 4.00 4 284.00

6.14 Providing and laying GI tape 32mm x 6mm from

earth electrode directly in ground as required.

(6.14)

Mtr. 141 50 50 7,050.00

7.1 Laying of one number PVC insulated and PVC

sheathed / XLPE power cable of 1.1 KV grade of

following size direct in ground including

excavation, sand cushioning, protective covering

and refilling the trench etc as required.

7.1.2 Above 35 sq. mm and upto 95 sq. mm Metre 202 150 0 0 0 150 30,300.00

MR E-

12

Supply of 3.5 cx95 sq. Mm Aluminium Arm cable ,

1.1 kv grade XLPE insulated Metre600 150 0 0 0 150 90,000.00

MR-RA

E-1,2,2^

Supplying of following type recessed / surface



CFL lamps complete as required.

Supply of lighting CFL bulbs 18 watt. Each 223 50 50 50 50 200 44,600.00

Supply of 1X 36 watt tube light. Each 1200 16 16 16 16 64 76,800.00

MR E-4

Supplying of ceiling fan, complete with blades

with suitable length of down rods shackle

insulator earthing point including connection etc .

as required.-(1200 SWEEP)

Each 1600.00 16 16 16 16 64 1,02,400.00

MR E-6


rust proof body and noice less operation

complete with louvers.

Each 1525.00 12 12 12 12 48 73,200.00

Page 8 of 10

MR E-7










Each 14300.00 16 16 16 16 64 9,15,200.00

MR E-

11

Supplying ,installation ,testing and

commissioning of cubical type LT panel

suitable for 415 V, 3 phase 4 wire 50 Hz AC

supply , fabricated in compartmentalized

design from CRCA sheet of 2 mm thickfor

frame work and covers , 3 mm thick for gland

plates i/c cleaning and finishing complete

with 7 tank process for powder coating in

approved shade having 200 Amp. capacity

extentible type TPN aluminium alloy bus-bars

of high conductivity ,DMC/SMC bus bar

support with short circuit withstand capacity

of 31 MVA for 1 sec. ,bottom base channel of

MS section not less than 100mmx50mmx5

mm thick fabrication shall be done in

transportable section ,intire panel shall have

a comman copper earth busbar of size



switch gears with required size of AL. bus

bars and control wiring .

Incoming:



Page 9 of 10


3 nos. phase indication LED lampswith 6 Amp

backup MCB

Outgoing:



2 no. 63 Amp. double pole MCB,curve Set 150000 1 1,50,000.00

MR

Supplying and fixing of the following sheet steel





door and complete.

a) 05 pairs Set 1000 1 1,000.00

For One Block 0.00 14,53,200.00

14,53,200.00

For 5 Blocks of Type II QTRS 72,66,000.00

Total=

Grand Total=

Page 10 of 10

DSR N.DSR

1.10

Wiring for light point/ fan point/ exhaust fan point/ call bell point

with 1.5 sq.mm FR PVC insulated copper conductor single core

cable in surface / recessed medium class PVC conduit, with

modular switch, modular plate, suitable GI box and earthing the

point with 1.5 sq.mm. FR PVC insulated copper conductor single


Light point 94 585 54990

Fan point 24 585 14040

exhaust

point16 585 9360

call bell

point4 585 2340

1.11

Wiring for twin control light point with 1.5 sq.mm FR PVC

insulated copper conductor single core cable in surface /

recessed medium class PVC conduit, 2 way modular switch,

modular plate, suitable GI box and earthing the point with 1.5

sq.mm. FR PVC insulated copper conductor single core cable etc

as required.

Point 12 770 9240

1.14

Wiring for circuit/ sub main wiring along with earth wire with the

following sizes of FRLS PVC insulated copper conductor, single

core cable in surface/ recessed medium class PVC conduit as

required

1.14.10 4X 10 sq. mm + 2 X 10 sq. mm earth wire Mtr. 100 597 59700

Detailed Estimate for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P) (Residential Block - Type - IV)

BOQ and Estimate of Type-IV residential Quarters for internal electrical installation (Project- ITBP Chapra)

DSR No. Description Unit Total/flat RATE Amount


1.17 Supplying and drawing following sizes of FR PVC insulated copper

conductor, single core cable in the existing surface/ recessed

steel/ PVC conduit as required.

1.17.3 3 x 1.5 sq. mm Meter 240 50 12000

1.17.21 3 x 4 sq. mm Meter 500 109.00 54500

1.18

Supplying and drawing following pair 0.5 sq mm FR PVC insulated

annealed copper conductor, unarmored telephone cable in the


1.18.2 2 Pair Metre 200 18 3600

1.19

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid

copper conductor PE insulated, shielded with fine tinned copper

braid and protected with PVC sheath in the existing surface/


Mtr. 100 28 2800

1.21

Supplying and fixing of following sizes of medium class PVC

conduit along with accessories in surface/recess including cutting

the wall and making good the same in case of recessed conduit as

required.

1.21.1 20 mm Mtr. 300 53 15900

1.21.2 25 mm Mtr. 300 65 19500

1.21.3 32 mm Metre 50 85.00 4250

1.24 Supplying and fixing following modular switch/ socket on the

existing modular plate & switch box including connections but

excluding modular plate etc. as required.

1.24.6 Telephone socket outlet Each 12 95.00 1140

1.24.7 TV antenna socket outlet Each 16 94.00 1504

1.24.8 Bell push Each 4 111.00 444

1.25

Supplying and fixing stepped type electronic fan regulator on the

existing modular plate switch box including connections but


Each 24 284.00 6816

1.26Supplying and fixing modular blanking plate on the existing

modular plate & switch box excluding modular plate as required.Each 36 23.00 828

1.27 Supplying and fixing following size/ modules, GI box along with

modular base & cover plate for modular switches in recess etc as

required.

1.27.1 1 or 2 Module (75mmX75mm) Each 12 166.00 1992

1.31

Supplying and fixing suitable size GI box with modular plate and


fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps

modular switch, connection etc. as required.

Each 72 303 21816

1.32

Supplying and fixing suitable size GI box with modular plate and


fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16

amps modular switch, connection etc. as required.

Each 68 395 26860

1.34 Supplying and fixing brass batten/ angle holder including

connection etc. as required. Each66

74.004884

1.38Supplying and fixing call bell/ buzzer suitable for single phase, 230

volts, complete as required.Each 4 61 244

1.41

Installation, testing and commissioning of pre-wired, fluorescent

fitting / compact fluorescent fitting of all types, complete with all

accessories and tube etc. directly on ceiling/ wall, including

connection with 1.5 sq. mm FRLS PVC insulated, copper

conductor, single core cable and earthing etc. as required

Each 28 91 2548

1.45

Installation, testing and commissioning of ceiling fan, including

wiring the down rods of standard length (up to 30 cm) with 1.5

sq. mm FRLS PVC insulated, copper conductor, single core cable,

including providing and fixing phenolic laminated sheet cover on

the fan box etc. as required.

Each 24 122 2928

1.50

Installation of exhaust fan in the existing opening, including

making good the damage, connection, testing, commissioning

etc. as required.

1.50.1 Up to 450 mm sweep Each 16 204 3264

2.8 Supplying and fixing following way prewired TP&N MCB

distribution board of steel sheet for 415 volts on surface/ recess



FR PVC insulated copper conductor up to terminal blocks, tinned

copper bus bar, neutral link, earth bar, din bar, detachable gland

plate, interconnections, powder painted including earthing etc. as



2.10

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C"

curve, miniature circuit breaker suitable for inductive load of


connections, testing and commissioning etc. as required

2.10.1 Single pole Each 30 169 5070

2.13 Supplying and fixing following rating, four pole, 415 volts, isolator

in the existing MCB DB complete with connections, testing and


2.13.2 63 amps Each 4 670 2680

2.14 Supplying and fixing following rating, double pole, (single phase

and neutral), 240 volts, residual current circuit breaker (RCCB),

having a sensitivity current up to 300 milliamperes in the existing

MCB DB complete with connections, testing and commissioning

etc. as required.

2.14.3 63 amps Each 4 2237 8948

2.18

Supplying and fixing 20 amps, 240 volts, SPN industrial type,

socket outlet, with 2 pole and earth, metal enclosed plug top

along with 20 amps "C" curve, SP, MCB, in sheet steel enclosure,

on surface or in recess, with chained metal cover for the socket

out let and complete with connections, testing and

commissioning etc.

as required.

Each 4 954 3816

5.4

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick

including accessories, and providing masonry enclosure with

cover plate having locking arrangement and watering pipe of 2.7

meter long etc. with charcoal/ coke and salt as required.

Set 4 4490 17960

5.9 Supplying and laying 25 mm X 5 mm G.I strip at 0.50 meter below

ground as strip earth electrode, including connection/

terminating with G.I. nut, bolt, spring, washer etc. as required.

(Jointing shall be done by overlapping and with 2 sets of G.I. nut

bolt & spring washer spaced at 50mm)

Meter 50 109 5450

6.2

Providing and fixing of lightning conductor finial, made of 25 mm

dia 300 mm long, G.I. tube, having single prong at top, with 85

mm dia 6 mm thick G.I. base plate including holes etc. complete

as required.

Each 1 369 369

6.9

Fixing of copper/ G.I. tape 20 mm X 3 mm thick on parapet or

surface of wall for lightning conductor complete as required.(For

horizontal run)

Meter 60 35 2100

6.10

Fixing of copper/ G.I. tape 20 mm X 3 mm thick on parapet or

surface of wall for lightning conductor complete as required.(For

vertical run)

Meter 50 72 3600

7.1 Laying of one number PVC insulated and PVC sheathed / XLPE

power cable of 1.1 KV grade of following size direct in ground

including excavation, sand cushioning, protective covering and

refilling the trench etc as required.

7.1.3 Above 95 sq. mm and upto 185 sq. mm Metre 60 210.00 12600

MR - RA E-

1

Supply of 3cx150 sq. Mm Aluminium Arm cable , 1.1 kv grade

XLPE insulatedMtr 60 1000.00 60000

MR - RA E-

8

Supplying ,installation ,testing and commissioning of cubical type

meter panel board suitable for 415 V, 3 phase 4 wire 50 Hz AC

supply , fabricated in compartmentalized design from CRCA sheet

of 2 mm thick for frame work and covers , 3 mm thick for gland

plates i/c cleaning and finishing complete with 7 tank process for

powder coating in approved shade having 200 Amp. capacity

extendable type TPN aluminium alloy bus-bars of high

conductivity ,DMC/SMC bus bar support with short circuit

withstand capacity of 31 MVA for 1 sec. ,bottom base channel of

MS section not less than 100mmx50mmx5 mm thick fabrication

shall be done in transportable section ,entire panel shall have a

common copper earth bus bar of size 25mmx5 mm at the rear

with 2 no. earth stud,solid connections from main bus bar to

switch gears with required size of AL. bus bars and control wiring

.

Set 1 237000 237000

Incoming:

160 Amp TP +N MCCB,35 KA (Ics=Icu up to 433 V)



3 nos. phase indication LED lamps with 6 Amp backup MCB

Outgoing:


8 no. 63 Amp. 4 pole MCB,curve

8 no. Space for energy meters ( As per Fig. 7 ,CPWD

specifications),encluded meters

MR - RA E-

3Supply of lighting CFL bulbs ( 8 Watt to 14 watt) Each 66 223 14718

MR - RA E-

4Supply of 28 watt tube light. Each 28 904 25312

MR - RA E-

9

Supplying of 1200mm A.C Ceiling fan sweep completeEach 24 2660.00 63840

MR - RA E-

6

Supply of exhaust fan with 300 mm sweep with rust proof body

and noise less operation complete with louvers. Each 16 1470 23520

425645 424390

850035

1700070

Total

For 2 Blocks of Type IV = 850035 x 2=1700070)

DSR N.DSR

1.10



insulated copper conductor single core cable

in surface / recessed medium class PVC

conduit, with modular switch, modular plate,

suitable GI box and earthing the point with

1.5 sq.mm. FR PVC insulated copper

conductor single core cable etc as required.

Light point 25 585 14625

Fan point 7 585 4095

exhaust

point4 585 2340

call bell

point2 585 1170

Detailed Estimate for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P) BOQ and Estimate of Type-V residential Quarters for internal electrical installation

DSR No. Description Unit Total/flat RATE Amount


1.11

Wiring for twin control light point with 1.5

sq.mm FR PVC insulated copper conductor

single core cable in surface / recessed

medium class PVC conduit, 2 way modular

switch, modular plate, suitable GI box and

earthing the point with 1.5 sq.mm. FR PVC

insulated copper conductor single core cable

etc as required.

Point 3 770 2310

1.14

Wiring for circuit/ sub main wiring along with

earth wire with the following sizes of FRLS

PVC insulated copper conductor, single core

cable in surface/ recessed medium class PVC

conduit as required

1.14.10 4X 10 sq. mm + 2 X 10 sq. mm earth wire Mtr. 30 597 17910

1.17 Supplying and drawing following sizes of FR

PVC insulated copper conductor, single core

cable in the existing surface/ recessed steel/

PVC conduit as required.

1.17.3 3 x 1.5 sq. mm Meter 100 50.00 5000

1.17.21 3 x 4 sq. mm Meter 250 109.00 27250

1.18

Supplying and drawing following pair 0.5 sq

mm FR PVC insulated annealed copper

conductor, unarmored telephone cable in the

existing surface/ recessed steel/ PVC conduit

as required.

1.18.2 2 Pair Metre 60 18 1080

1.19



insulated, shielded with fine tinned copper

braid and protected with PVC sheath in the

existing surface/ recessed steel/ PVC conduit

as required.

Mtr. 60 28 1680

1.21

Supplying and fixing of following sizes of

medium class PVC conduit along with

accessories in surface/recess including cutting

the wall and making good the same in case of

recessed conduit as required.

1.21.1 20 mm Mtr. 220 53 11660

1.21.2 25 mm Mtr. 150 65 9750

1.21.3 32 mm Metre 30 85.00 2550

1.24 Supplying and fixing following modular

switch/ socket on the existing modular plate

& switch box including connections but


1.24.6 Telephone socket outlet Each 4 95.00 380

1.24.7 TV antenna socket outlet Each 4 94.00 376

1.24.8 Bell push Each 2 111.00 222

1.25

Supplying and fixing stepped type electronic

fan regulator on the existing modular plate

switch box including connections but


Each 7 284.00 1988

1.26 Supplying and fixing modular blanking plate

on the existing modular plate & switch box

excluding modular plate as required.

Each

16 23.00 368

1.27 Supplying and fixing following size/ modules,

GI box along with modular base & cover plate

for modular switches in recess etc as

required.

1.27.1 1 or 2 Module (75mmX75mm) Each 16 166.00 2656

1.31


modular plate and cover in front on surface

or in recess, including providing and fixing 3

pin 5/6 amps modular socket outlet and 5/6

amps modular switch, connection etc. as

required.

Each 13 303 3939

1.32


modular plate and cover in front on surface

or in recess, including providing and fixing 6

pin 5/6 & 15/16 amps modular socket outlet

and 15/16 amps modular switch, connection

etc. as required.

Each 24 395 9480

1.34Supplying and fixing brass batten/ angle

holder including connection etc. as required.Each 15 74.00 1110

1.38

Supplying and fixing call bell/ buzzer suitable

for single phase, 230 volts, complete as

required.

Each 2 61 122

1.41


wired, fluorescent fitting / compact

fluorescent fitting of all types, complete with

all accessories and tube etc. directly on

ceiling/ wall, including connection with 1.5 sq.

mm FRLS PVC insulated, copper conductor,

single core cable and earthing etc. as required

Each 10 91 910

1.45

Installation, testing and commissioning of

ceiling fan, including wiring the down rods of

standard length (up to 30 cm) with 1.5 sq.

mm FRLS PVC insulated, copper conductor,

single core cable, including providing and

fixing phenolic laminated sheet cover on the

fan box etc. as required.

Each 7 122 854

1.50

Installation of exhaust fan in the existing

opening, including making good the damage,

connection, testing, commissioning etc. as

required.

1.50.1 Up to 450 mm sweep Each 4 204 816

2.8 Supplying and fixing following way prewired

TP&N MCB distribution board of steel sheet

for 415 volts on surface/ recess complete

with loose wire box, terminal connectors for

all incoming and outgoing circuits, duly

prewired with suitable size FR PVC insulated

copper conductor up to terminal blocks,

tinned copper bus bar, neutral link, earth bar,

din bar, detachable gland plate,


earthing etc. as required.(But without MCB/

RCCB/ Isolator)


2.10

Supplying and fixing 5 amps to 32 amps

rating, 240/415 volts, "C" curve, miniature

circuit breaker suitable for inductive load of

following poles in the existing MCB DB



2.10.1 Single pole Each 30 169 5070

2.13 Supplying and fixing following rating, four

pole, 415 volts, isolator in the existing MCB



2.13.2 63 amps Each 1 670 670

2.14 Supplying and fixing following rating, double

pole, (single phase and neutral), 240 volts,

residual current circuit breaker (RCCB), having

a sensitivity current up to 300 milliamperes in

the existing MCB DB complete with

connections, testing and commissioning etc.

as required.

2.14.3 63 amps Each 3 2237 6711

2.18



earth, metal enclosed plug top along with 20

amps "C" curve, SP, MCB, in sheet steel

enclosure, on surface or in recess, with

chained metal cover for the socket out let

and complete with connections, testing and

commissioning etc.

as required.

Each 3 954 2862

5.2 Earthing with G.I. earth pipe 4.5 metre long,

40 mm dia including accessories, and

providing masonry enclosure with cover plate

having locking arrangement and watering

pipe etc. with charcoal/ coke and salt as

required.

Set 2 3926 7852

5.9 Supplying and laying 25 mm X 5 mm G.I strip

at 0.50 meter below ground as strip earth

electrode, including connection/ terminating

with G.I. nut, bolt, spring, washer etc. as

required. (Jointing shall be done by

overlapping and with 2 sets of G.I. nut bolt &

spring washer spaced at 50mm)

Meter 8 109 872

5.16 Providing and fixing 6 SWG dia G.I. wire on

surface or in recess for loop earthing as

required.

Meter 20 35 700

MR - RA-3Supply of lighting CFL bulbs ( 8 Watt to 14

watt)Each 15 223 3345

MR - RA-4 Supply of 28 watt tube light. Each 10 904 9040

MR - RA-9

Supplying of 1200mm A.C Ceiling fan sweep

complete Each 7 2660.00 18620

MR - RA-6

Supply of exhaust fan with 300 mm sweep

with rust proof body and noise less operation

complete with louvers.

Each 4 1470.00 5880

162160 36885

199045

Total

Grand Total

DSR Item no. Description Unit RateQty. Per

Flat

DSR N.DSR

1.10 Wiring for light point/ fan point/ exhaust fan point/ call bell

point with 1.5 sq.mm FR PVC insulated copper conductor


conduit, with modular switch, modular plate, suitable GI

box and earthing the point with 1.5 sq.mm. FR PVC

insulated copper conductor single core cable etc as

required.

1.10.1 Group A Point 518.00 352 1,82,336.00

1.11

Wiring for twin control light point with 1.5 sq.mm FR PVC

insulated copper conductor single core cable in surface /

recessed medium class PVC conduit, 2 way modular switch,

modular plate, suitable GI box and earthing the point with

1.5 sq.mm. FR PVC insulated copper conductor single core

cable etc as required.

Point 770.00 32 24,640.00

1.14

Wiring for circuit/ sub main wiring along with earth wire

with the following sizes of FRLS PVC insulated copper

conductor, single core cable in surface/ recessed medium

class PVC conduit as required

1.14.5 2 X 10 sq. mm + 1 X 10 sq. mm earth wire Mtr. 327 290 94,830.00

1.17 Supplying and drawing following sizes of FR PVC insulated

copper conductor, single core cable in the existing surface/


1.17.3 3 x 1.5 sq. mm Meter 50.00 600 30,000.00

1.17.21 3 x 4 sq. mm Meter 109.00 800 87,200.00


BOQ and Estimate of Type-III -32 residential Quarters for internal electrical installation

Amount

Page 1 of 7

1.18 Supplying and drawing following pair 0.5 sq mm FR PVC

insulated annealed copper conductor, unarmored

telephone cable in the existing surface/ recessed steel/

PVC conduit as required.

1.18.2 2 Pair Metre 18.00 400 7,200.00

1.19

Supplying and drawing co-axial TV cable RG-6 grade, 0.7

mm solid copper conductor PE insulated, shielded with fine

tinned copper braid and protected with PVC sheath in the


Mtr. 28 200 5,600.00

1.21

Supplying and fixing of following sizes of medium class PVC

conduit along with accessories in surface/recess including

cutting the wall and making good the same in case of

recessed conduit as required.

1.21.1 20 mm Mtr. 53 350 18,550.00

1.21.2 25 mm Mtr. 65 500 32,500.00

1.21.3 32 mm Metre 85.00 100 8,500.00

1.24 Supplying and fixing following modular switch/ socket on

the existing modular plate & switch box including

connections but excluding modular plate etc. as required.

1.24.6 Telephone socket outlet Each 95.00 16 1,520.00

1.24.7 TV antenna socket outlet Each 94.00 48 4,512.00

1.24.8 Bell push Each 111.00 16 1,776.00

1.27 Supplying and fixing following size/ modules, GI box along

with modular base & cover plate for modular switches in

recess etc as required.

1.27.1 1 or 2 Module (75mmX75mm) Each 166.00 64 10,624.00

1.25

Supplying and fixing stepped type electronic fan regulator

on the existing modular plate switch box including

connections but excluding modular plate etc. as required.

Each 284.00 64 18,176.00

Page 2 of 7

1.26

Supplying and fixing modular blanking plate on the existing

modular plate & switch box excluding modular plate as

required.

Each 23.00 148 3,404.00

1.31

Supplying and fixing suitable size GI box with modular plate

and cover in front on surface or in recess, including

providing and fixing 3 pin 5/6 amps modular socket outlet

and 5/6 amps modular switch, connection etc. as required.

.

Each 303.00 144 43,632.00

1.32

Supplying and fixing suitable size GI box with modular plate

and cover in front on surface or in recess, including

providing and fixing 6 pin 5/6 & 15/16 amps modular

socket outlet and 15/16 amps modular switch, connection

etc. as required.

Each 395.00 192 75,840.00

1.34 Supplying and fixing brass batten/ angle holder including

connection etc. as required. Each 74.00152 11,248.00

1.38Supplying and fixing call bell/ buzzer suitable for single

phase, 230 volts, complete as required.Each 61 16 976.00

1.41

Installation, testing and commissioning of pre-wired,

fluorescent fitting / compact fluorescent fitting of all types,

complete with all accessories and tube etc. directly on

ceiling/ wall, including connection with 1.5 sq. mm FRLS

PVC insulated, copper conductor, single core cable and


Each 91 88 8,008.00

1.45

Installation, testing and commissioning of ceiling fan,

including wiring the down rods of standard length (up to 30

cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor,

single core cable, including providing and fixing phenolic

laminated sheet cover on the fan box etc. as required.

Each 122 64 7,808.00

1.50

Installation of exhaust fan in the existing opening, including

making good the damage, connection, testing,


1.50.1 Up to 450 mm sweep Each 204 48 9,792.00

Page 3 of 7

2.7 Supplying and fixing following way prewired SP&N MCB

distribution board of steel sheet for 240 volts on surface/

recess complete with loose wire box, terminal connectors

for all incoming and outgoing circuits, duly prewired with

suitable size FR PVC insulated copper conductor up to

terminal blocks, tinned copper bus bar, neutral link, earth

bar, din bar, detachable gland plate, interconnections,

powder painted including earthing etc. as required. (But

without MCB/ RCCB/ Isolator)

2.7.6 2 + 12 way, Double door Each 3613 16 57,808.00

2.10

Supplying and fixing 5 amps to 32 amps rating, 240/415

volts, "C" curve, miniature circuit breaker suitable for

inductive load of following poles in the existing MCB DB

complete with connections, testing and commissioning etc.

as required

2.10.1 Single pole Each 169 366 61,854.00

2.12Supplying and fixing following rating, double pole, 240

volts, isolator in the existing MCB DB complete with


2.12.2 63 amps Each 250 4 1,000.00

2.14

Supplying and fixing following rating, double pole, (single

phase and neutral), 240 volts, residual current circuit

breaker (RCCB), having a sensitivity current up to 300

milliamperes in the existing MCB DB complete with


2.14.3 63 amps Each 2237 4 8,948.00

5.4

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm

thick including accessories, and providing masonry

enclosure with cover plate having locking arrangement and

watering pipe of 2.7 meter long etc. with charcoal/ coke

and salt as required.

Set 4490 4

17,960.00

Page 4 of 7

5.9 Supplying and laying 25 mm X 5 mm G.I strip at 0.50 meter

below ground as strip earth electrode, including

connection/ terminating with G.I. nut, bolt, spring, washer

etc. as required. (Jointing shall be done by overlapping and

with 2 sets of G.I. nut bolt & spring washer spaced at

50mm)

Meter 109.00 36

3,924.00

6.2 Providing and fixing of lightning conductor finial, made of

25 mm dia 300 mm long, G.I. tube, having single prong at

top, with 85 mm dia 6 mm thick G.I. base plate including

holes etc. complete as required.

Each 369.00 2

738.00

6.9 Fixing of copper/ G.I. tape 20 mm X 3 mm thick on parapet

or surface of wall for lightning conductor complete as

required.(For horizontal run)

Meter 35.00 80

2,800.00

6.10 Fixing of copper/ G.I. tape 20 mm X 3 mm thick on parapet

or surface of wall for lightning conductor complete as

required.(For vertical run)

Meter 72.00 30

2,160.00

7.1 Laying of one number PVC insulated and PVC sheathed /

XLPE power cable of 1.1 KV grade of following size direct in

ground including excavation, sand cushioning, protective

covering and refilling the trench etc as required.

7.1.3 Above 95 sq. mm and upto 185 sq. mm Metre 210.00 60 12,600.00

MR - RA E-1Supply of 3cx150 sq. Mm Aluminium Arm cable , 1.1 kv

grade XLPE insulatedMtr 1000.00 60

60,000.00

.

Page 5 of 7

MR - RA E-7

Supplying ,installation ,testing and commissioning of

cubical type meter panel board suitable for 415 V, 3 phase

4 wire 50 Hz AC supply , fabricated in compartmentalized

design from CRCA sheet of 2 mm thick for frame work and

covers , 3 mm thick for gland plates i/c cleaning and

finishing complete with 7 tank process for powder coating

in approved shade having 200 Amp. capacity extendable

type TPN aluminium alloy bus-bars of high conductivity

,DMC/SMC bus bar support with short circuit withstand

capacity of 31 MVA for 1 sec. ,bottom base channel of MS

section not less than 100mmx50mmx5 mm thick

fabrication shall be done in transportable section ,entire

panel shall have a common copper earth bus bar of size

25mmx5 mm at the rear with 2 no. earth stud,solid

connections from main bus bar to switch gears with

required size of AL. bus bars and control wiring .

Set 257000 1

2,57,000.00

Incoming:

160 Amp TP +N MCCB,35 KA (Ics=Icu up to 433 V)



3 nos. phase indication LED lamps with 6 Amp backup MCB

Outgoing:


16 no. 63 Amp. double pole MCB,curve

16 no. Space for energy meters ( As per Fig. 7 ,CPWD

specifications),included meters

Page 6 of 7

MR - RA E-3 Supply of lighting CFL bulbs ( 8 Watt to 14 watt) Each 223 152 33,896.00

MR - RA E-4 Supply of 28 watt tube light. Each 904 88 79,552.00

MR - RA E-5Supplying of 1200mm A.C Ceiling fan sweep complete

Each 1600.00 128 2,04,800.00

MR - RA E-6Supply of exhaust fan with 300 mm sweep with rust proof

body and noise less operation complete with louvers. Each 1470.00 48 70,560.00

8,58,464.00 7,05,808.00

15,64,272.00

31,28,544.00

For One Block

For 2 Blocks of Type III QTRS

Page 7 of 7

S.NO. DESCRIPTION D.S.R AMOUNT NON-DSR AMOUNT

I EXTERNAL SEWERAGE SYSTEM 95,83,145.72 0.00

II EXTERNAL DRAINAGE SYSTEM 105,52,349.75 1,74,873.96

III EXTERNAL WATER SUPPLY SYSTEM 20,11,757.65 42,37,100.30

IV UNDER GROUND WATER TANK & PUMP ROOM 23,15,991.24 13,91,896.80

V ROAD WORK 311,60,754.05 0.00

VI EXTERNAL ELECTRICAL SYSTEM & LIGHTING WORK 20,18,256.90 102,16,692.98

TOTAL 576,42,255.31 160,20,564.04

Proposed construction of external development & bulk services (civil & electrical works) for ITBP at Kalikiri,

Chittoor (A.P)

EXTERNAL SEWERAGE, DRAINAGE, WATER SUPPLY SYSTEM, ROAD WORK &

EXTERNAL ELECTRICAL SYSTEM & LIGHTING WORK

ABSTRACT OF COST

TOTAL COST 736,62,819.35

AMOUNT (in Rs.)

Signature of EPIL

1 / 1

EXT (CIVIL&ELECT) WORK SUMMARY

EXTERNAL DEVELOPMENT BULK SERVICES Signature of Contractor

DSR 2014 NON-DSR

[1] EXTERNAL SEWERAGE SYSTEM

SECTION-I - SEWERAGE NETWORK 60,52,158.72

SECTION-II- SWERAGE TREATMENT PLANT (MECH & ELECTRICAL WORKS & AMC FOR STP) 35,30,987.00

TOTAL [I] 95,83,145.72

[2] EXTERNAL DRAINAGE SYSTEM

SECTION-I - DRAINAGE NETWORK 97,28,591.65

SECTION-II - RAIN WATER HARVESTING PITS (4 nos) 8,23,758.10 1,74,873.96

TOTAL [II] 105,52,349.75 1,74,873.96

[3] EXTERNAL WATER SUPPLY SYSTEM

SECTION-I - DISTRIBUTION NETWORK FOR FRESH WATER SUPPLY 20,11,757.65 6,74,520.30

SECTION-III - PUMPING MACHINERY 1,67,580.00

SECTION -V - permission from local body authorities 17,00,000.00

SECTION-VI - TUBEWELLS 16,95,000.00

TOTAL [III] 20,11,757.65 42,37,100.30

[4] ROAD WORK

ROAD WORK / HORTICULTURE / EARTH WORK / SIGNAGES/GUARD ROOMS 311,60,754.05 0.00

TOTAL [IV] 311,60,754.05 0.00

[5] UNDER GROUND WATER TANK & PUMP ROOM WORK

UNDER GROUND WATER TANK & PUMP ROOM 23,15,991.24 13,91,896.80

TOTAL [V] 23,15,991.24 13,91,896.80

TOTAL [I TO V] 556,23,998.41 58,03,871.06

GRAND TOTAL 614,27,869.47

SECTION [A]

Proposed construction of external development & bulk services (civil & electrical works) for ITBP at

Kalikiri, Chittoor (A.P)

EXTERNAL SEWERAGE, DRAINAGE, WATER SUPPLY & ROAD WORK

S.NO NAME OF SUB-HEADAMOUNT [INR]

SUMMARY OF COST

Signature of EPIL

1 / 1

EXT. CIVIL WORK SUMMARY


S.

No DSR.14 DESCRIPTION UNIT QTY RATE AMOUNT

[1

]EXTERNAL SEWERAGE SYSTEM

SEWERAGE NETWORK

(D.S.R. 2014 ITEMS)

1. Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and

dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated

soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including

consolidating each deposited layer by ramming, watering, etc. and disposing of surplus

excavated soil as directed, within a lead of 50 m :

2.10.1 All kinds of soil2.10.1.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia metre 720.00 208.30 1,49,976.00

2 2.11 Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m,

but not exceeding 3 m. (Rate is over corresponding basic item for depth upto 1.5 metre). metre 1180.00 281.21 3,31,821.90

3 2.12 Extra for excavating trenches for pipes, cables, etc, in all kinds of soil for depth exceeding 3 m in

depth, but not exceeding 4.5 m. (Rate is over corresponding basic item for depth upto 1.5

metre.) metre 1770.00 722.80 12,79,357.77

19.10 supply and laying of Stoneware pipe19.1.4 250 mm. dia. RCC Pipes metre 239.00 696.50 1,66,463.50

19.1.5 300 mm. dia. RCC Pipes metre 478.00 770.40 3,68,251.20

400 mm. dia. RCC Pipes metre 2200.00 881.00 19,38,200.00

5 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering. (for RCC pipe bedding) by 1:4:8 (1 cement : 4 coarse sand : 8 graded

stone agg. 40 mm nominal size) Cum 15.00 4301.15 64,517.25

BILL OF QUANTITIES (EXTERNAL SEWERAGE, DRAINAGE AND WATER SUPPLY SYSTEM)

SECTION-I

4

Signature of EPIL

1 / 14

EXT SWD BOQ


S.


8 19.11 Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at

top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12 mm thick with

cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement

foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal

size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4

graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all

complete as per standard design :

19.11.1 1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560 mm

internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than

182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20

mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm

thick cement plaster at the external surface shall be paid for separately) :

19.11.1.2 With Sewer bricks conforming IS : 4885 each 8.00 17166.25 1,37,330.00

9 19.12 Extra depth for circular type manhole 1.22 m internal dia (at bottom) beyond 1.68 m to 2.29 m

:19.12.2 With Sewer bricks conforming IS : 4885 metre 7.00 6856.95 47,998.65

12 19.16 Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS :

10910, on 12 mm dia steel bar conforming to IS : 1786, having minimum cross section as 23

mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm

space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides

necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing

and suitable to with stand the bend test and chemical resistance test as per specifications and

having manufacture's permanent identification mark to be visible even after fixing, including

fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6

graded stone aggregate 20 mm nominal size) complete as per design.each 150.00 311.60 46,740.00

Signature of EPIL

2 / 14

EXT SWD BOQ


S.


13 19.22 Providing sand cast iron drop connection externally for 60 cm drop from branch sewer line to

main sewer manhole including inspection and cleaning eye with chain and lid, sand cast iron drop

pipe and bend encased all-round with cement concrete 1:5:10 (1 cement : 5 fine sand : 10

graded stone aggregate 40 mm nominal size) with all centering and shuttering required, cutting

holes in walls and making good with brick work in cement mortar 1:4 (1 cement : 4 coarse sand)

plastered with cement mortar 1:3 (1 cement : 3 coarse sand) on inside plastered with plastered

with cement mortar 1:3 (1 cement : 3 coarse sand) on inside of the manhole wall, lead caulked

joints between sand cast iron pipes and fittings, stiff cement mortar 1:1 (1 cement : 1 fine sand)

joints between sand cast iron tee and S.W. pipe, making required channels between complete as

per standard design and specifications :

19.22.2 150 mm dia sand cast iron drop connection each 15.00 8544.30 1,28,164.50

14 19.23 Extra for depths beyond 60 cm of sand cast iron drop connection complete :

19.23.2 For 150 mm dia sand cast iron drop connection metre 15.00 2508.70 37,630.50

15 Constructing brick masonry manhole with F.P.S. bricks in cement mortar 1 : 4 (1 cement : 4

coarse sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 grade stone

aggregate 20mm nominal size); foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8

graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement

mortar 1:3 (1cement 3 coarse sand ) finished with a floating coat of neat cement and making

channels in cement concrete 1:2:4 (1cement : 2 coarse sand: 4 graded stone aggregate 20 mm

nominal size) finishd with a floating coat of neat cement complete as per standard design

19.7.1.1 Inside size 90 x 80 cm & 45 cm deep including CI cover with frame (light duty) 455 x 610mm

internal dimension total wt. of cover & frame to be not less than 38 kg (wt. of cover 23 kg and

wt. of frame 15 kg) each 50.00 8507.00 4,25,350.00

19.7.2.1 Inside size 120 X 90 cm. and 90 cm. deep including CI cover with frame (medium duty) 500 mm

internal diameter, total weight of cover and frame to be not less than 116 kg (wt of cover 58 kg

and wt. of frame 58 kg.) each 41.00 18304.45 7,50,482.45

16 Extra for depth for manhole with F.P.S. bricks19.8.1.1 size 90 X 80 cm m 10.00 5638.20 56,382.00

Signature of EPIL

3 / 14

EXT SWD BOQ


S.


19.8.1.2 size 1.2m X 90 cm m 20.00 6174.65 1,23,493.00

[A] 60,52,158.72

60,52,158.72

[2] EXTERNAL DRAINAGE SYSTEM

DRAINAGE NETWORK(D.S.R. 2012 ITEMS)

2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in

foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including

dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated

soil and disposal of surplus excavated soil as directed, within a lead of 50 m.Upto 1.5 M depth.

2.8.1 All kinds of soil. Cum 1625.00 157.50 2,55,937.50


centering and shuttering. by 1:4:8 (1 cement : 4 coarse sand : 8 graded stone agg. 40 mm

nominal size) - for PCC bed of drains Cum 345.00 4301.15 14,83,896.75

3 4.1.3 Providing and laying in position cement concrete of specied grade excluding the cost of

centering and shuttering (for filling of drain haunches) by 1:2:4 (1 cement : 2 coarse sand : 4

graded stone agg. 20 mm nominal size) Cum 290.00 5466.30 15,85,227.00

4 6.1.1 Brick work with common burnt clay FPS bricks of class designation 7.5 in foundation and plinth

by Cement mortar 1:4 (1 cement : 4 coarse sand) Cum 966.00 4918.65 47,51,415.90

5 13.1.1 12 mm thick cement plaster of mix 1:4 (1 cement : 4 fine sand). Sq.m 3900.00 163.35 6,37,065.00

SLAB CULVERT6 5.3+diff.

of

5.2.2&5.2

.3

Reinforced cement concrete work in RCC culvert slab with 1:1.5:3 (1 cement : 1.5 coarse

sand and 3 gradded stone aggregate of 20 mm nominal size) excluding centering and shuttering

and reinforcement. (Rate 6778.20+(7074.30 - 6570.00)=7282.50Cum 51.00 7282.50 3,71,407.50

TOTAL D.S.R. 2014

SECTION -I

1

Signature of EPIL

4 / 14

EXT SWD BOQ


S.


7 5.22.6 Reinforcement for RCC work including staightening, cutting, bending, placing in position and

binding all complete upto plinth level using Thermo-Mechanically Treated bars Kg 7800.00 68.10 5,31,180.00

8 5.9.3 Centering and shuttering including struting, proping etc and removal of form for suspended

floors roofs etc for culvert slab Sqm 280.00 401.65 1,12,462.00

[A] 97,28,591.65

97,28,591.65

RAIN WATER HARVESTING[A] DESILTING CHAMBER (1 No.)

2.6 Earth work In excavation by mechanical means (Hydraulic excavator)/manual means over areas

(exceeding 30cm in depth. 1.5m in width as per as 10 sq.m on plan) including disposal of

excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly

dressed.

2.6.1 All kinds of soil Cu.M 221.00 155.60 34,387.60

2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in

layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and watering

, lead up to 50 m and lift up to 1.5m. Cu.M 15.00 112.40 1,686.00

2.26 Extra for every additional lift of 1.5 m or part there of in:2.26.1 All kinds of soil. Cu.M 15.00 46.25 693.75

4.1 Providing and laying in position cement cncrete of specified grade excluding the cost of centring

and shuttering - all work upto plinth level.

4.1.8 1:4:8 (1 cement :4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Cu.M 1.50 4301.15 6,451.73

5.9 Centring and shuttering including strutting, proppintg etc. and removal of form for:5.9.3 Suspended floors,roofs, landings, balconies and access platform. Sq.M 2.00 401.65 803.30

5.9.16 Edges of slabs and breaks in floors and walls,5.9.16.1 Under 20 cm wide R.M. 5.00 116.40 582.00

5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and

binding all complete.

TOTAL D.S.R. 2013

SECTION-II

Signature of EPIL

5 / 14

EXT SWD BOQ


S.


5.22.6 Thermo Mechanically Treated bars. Kg. 10.00 68.10 681.00

5.33 Providing and laying in position machine batched, machine mixed and machine vibrated design

mix cement concrete of specified grade for reinforced cement concrete structural elements

excluding the cost of centring, shuttering, l finishing and reinforcement. including Admixtures in

recomended proportions. (as per IS 9103) to accelerate, retard setting of concrete improve work

ability without impairing strength and durability as per directio of Engineer in charge M-25 grade

reinforced cement concrete. by using 410kg. of cement per cum. of concrete. All work up to floor

V level Cu.M 5.00 6296.15 31,480.75

6.1 Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in:6.1.1 Cement mortar 1:4 (1 cement: 4 coarse sand) Cu.M 5.00 4918.65 24,593.25

13.1.1 12 mm thick cement plaster of mix 1:4 (1 cement : 4 fine sand). Cum 15.00 163.35 2,450.25

19.1 Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement

mortar in the proportion of 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete:

19.1.3 200 mm diameter R.M. 5.00 462.15 2,310.75

1,06,120.38

NON DSR ITEMSNS.1 Supplying & Filling with coarse sand in Trench Cu.M 1.50 1218.56 1,827.84

NS.2 Supplying & Fixing SFRC Mainhole Cover & Frame (Size 900x600) R.M. 3.00 2620.00 7,860.00

9,687.84

[B] RECHARGE PIT (1 No.)

DSR ITEMS

2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in

foundation trenches or drains (not exceeding 1.5m in width or 10 Sq.M on plan) including

dressing of sides and ramming ob bottoms, lift upto 1.5m, including getting out the excavated

soil and disposal of surplus excavated soil as directed, withen a lead of 50m.

2.8.1 All kinds of soil Cu.M 15.00 157.50 2,362.50

2.26 In all kind of soil upto 1.5m to 3.0m. depth Cu.M 15.00 162.66 2,439.90

2.26.1 In all kind of soil upto 3.0m to 4.5m. depth Cu.M 10.00 46.25 462.50

NON-DSR

DSR 2012

Signature of EPIL

6 / 14

EXT SWD BOQ


S.


2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in

layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and watering

, lead up to 50 m and lift up to 1.5m. Cu.M 15.00 112.40 1,686.00

4.1 Providing and laying in position cement cncrete of specified grade excluding the cost of centring

and shuttering - all work upto plinth level.4.1.8 1:4:8 (1 cement :4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Cu.M 2.00 4301.15 8,602.30

5.9 Centring and shuttering including strutting, proppintg etc. and removal of form for:5.9.3 Suspended floors,roofs, landings, balconies and access platform. Sq.M 12.00 401.65 4,819.80

5.9.16 Edges of slabs and breaks in floors and walls,5.9.16.1 Under 20 cm wide R.M. 15.00 116.40 1,746.00

5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and

binding all complete.5.22.6 Thermo Mechanically Treated bars. Kg. 85.00 68.10 5,788.50

5.33 Providing and laying in position machine batched, machine mixed and machine vibrated design

mix cement concrete of specified grade for reinforced cement concrete structural elements

excluding the cost of centring, shuttering, l finishing and reinforcement. including Admixtures in

recomended proportions. (as per IS 9103) to accelerate, retard setting of concrete improve work

ability without impairing strength and durability as per directio of Engineer in charge M-25 grade

reinforced cement concrete. by using 410kg. of cement per cum. of concrete. All work up to floor

V level Cu.M 3.00 6296.15 18,888.45

6.1 Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in:6.1.1 Cement mortar 1:4 (1 cement: 4 coarse sand) Cu.M 10.00 4918.65 49,186.50

13.1.1 12 mm thick cement plaster of mix 1:4 (1 cement : 4 fine sand). Cum 15.00 163.35 2,450.25

19.1 Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement

mortar in the proportion of 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete:

19.1.3 200 mm diameter R.M. 3.00 462.15 1,386.45

99,819.15

NON DSR ITEMSNS.3 Supplying & Filling with coarse sand in Trench Cu.M 3.00 457.50 1,372.50

DSR 2014

Signature of EPIL

7 / 14

EXT SWD BOQ


S.


NS.4 Drilling of recharge bore well 300mm dia by manual / rig machine upto a depth till 5 meter above

highest level. R.M. 15.00 565.25 8,478.75

NS.5 Providing & Lovering 160mm outer dia PVC tube well casing slotted pipe 6kg/ sq.cm with top

socket & plug. R.M. 15.00 452.20 6,783.00

NS.6 Filling of 1.6 - 4.8mm pea gravel around tube well. Cu.M 1.50 3990.00 5,985.00

NS.7 Supplying & Laying stone borders 50-150mm size Cu.M 3.00 771.40 2,314.20

NS.8 Steel Wire Fabric Sq.M 12.00 452.20 5,426.40

NS.9 Supplying & Fixing 560dia SFRC Cover & Frame Heavy Duty. Each 3.00 1223.60 3,670.80

NON-DSR 34,030.65

Total DSR For 4 Pits (Section II) 8,23,758.10

Total NON-DSR For 4 Pits (Section II) 1,74,873.96

[3

]

EXTERNAL WATER SUPPLY SYSTEM

SECTION-III DISTRIBUTION NETWORK FOR FRESH WATER SUPPLY(D.S.R. 2014 ITEMS)

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and

dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated

soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including

consolidating each deposited layer by ramming, watering, etc. and disposing of surplus

excavated soil as directed, within a lead of 50 m :

2.10.1 All kinds of soil2.10.1.1 Pipes, cables etc, not exceeding 80 mm dia. metre 2005.00 127.55 2,55,737.75

2.10.1.2 Pipes etc exceeding 80 mm but not exceeding 300 mm dia. metre 130.00 208.30 27,079.00

2 18.12 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.

External work18.12.6 50 mm dia nominal bore metre 1754.00 399.50 7,00,723.00

18.12.8 80 mm dia nominal bore metre 668.00 637.05 4,25,549.40

1

Signature of EPIL

8 / 14

EXT SWD BOQ


S.


3 18.40 Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved

quality :

18.40.6 50 mm diameter pipe metre 1754.00 14.15 24,819.10

18.40.8 80 mm diameter pipe metre 668.00 20.25 13,527.00

4 18.41 Providing and filling sand of grading zone V or coarser grade, all- round the G.I. pipes in external

work :18.41.5 40 mm diameter pipe metre 70.00 71.75 5,022.50

Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 :

18.72.1 100 mm dia Ductile Iron Class K-7 pipes metre 30.00 924.05 27,721.50

18.72.2 150 mm dia Ductile Iron Class K-7 pipes metre 40.00 1336.70 53,468.00

18.72.3 200 mm dia Ductile Iron Class K-7 pipes metre 60.00 1849.00 1,10,940.00

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including

testing of joints and the cost of rubber gasket :18.70.1 100 mm dia pipes Joint 5.00 61.85 309.25

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions

etc. (the tail pieces if required will be paid separately) :

18.31.1.2 100 mm. dia. Class II Each 3.00 3921.30 11,763.90



9 18.59 Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber

insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) :

18.59.1 50 mm dia Each 5.00 4778.30 23,891.50

18.59.2 80 mm dia Each 5.00 6172.10 30,860.50

5

7

8

Signature of EPIL

9 / 14

EXT SWD BOQ


S.


10 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)

:18.17.4 50 mm nominal bore Each 5.00 750.75 3,753.75

18.17.6 80 mm nominal bore Each 5.00 1920.60 9,603.00


centering and shuttering (for thrust blocks at bends and junctions of water lines ) by 1:2:4 (1

cement : 2 coarse sand : 4 graded stone agg. 20 mm nominal size) Cum 10.00 5466.30 54,663.00

12 18.33.1 Constructing brick masonry chamber 600 x 600 x 750 mm inside with common burnt clay

F.P.S.(non modular) bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse

sand) for Sluice Valve / Air Valve, with C. I. surface box 100 mm top diameter, 160 mm

bottom diameter and 180mm deep (inside) with chained lid and RCC top slab with 1 : 2 : 4 mix

(1 cement : 2 coarse sand : 4 grade stone aggregate 20 mm nominal size); i/c necessary

excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand: 10 graded stone aggregate 40

mm nominal size) and inside plastering with cement mortar 1 : 3 (1 cement : 3 coarse sand )

12 mm thick finished with a floating coat of neat cement complete as per standard design Each 15.00 6754.30 1,01,314.50

13 18.80 Disinfecting C.I. water mains by flushing with water containing bleaching powder @ 0.5 gms

per litre of water and cleaning the same with fresh water, operation to be repeated three times

including getting the sample of water from the disinfected main tested in the municipal

laboratory. 100.00

18.80.2 100 mm diameter C.I. pipe metre 40.00 926.60 37,064.00



[A] 20,11,757.65

20,11,757.65

MAIN DISTRIBUTION NETWORK FOR FRESH WATER SUPPLY ( NON DSR)

TOTAL D.S.R. 2014

SECTION-III

Signature of EPIL

10 / 14

EXT SWD BOQ


S.


1 Excavating trenches upto 1.5 meter depth in all kind of soil of required width for pipes.

including excavation for sockets and dressing of sides ramming of bottoms including getting out

the excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth

including consolidating each deposited layer by ramming, watering, etc & disposing of surplus

excavated soil as directed within a lead of 50m or as directed at site by engg-in-charge.

Pipes etc from 80 mm and above but not exceeding 300 mm dia. metre 203.00 152.95 31,048.85

2 Supply, laying, jointing, testing and commissioning of M.D.P.E. pipes (PE 80) including

transportation upto the site, jointing by electro fusion welding, providing and fixing all

electrofusion fittings i.e. bends, tees, couplers, junctions, tapers, reducers, adopters, end caps,

flanges with nut and bolts for fixing of appurtenances complete in all respects. (Make : Duraline /

Reliance / Kimplas)(PN 8)

110 mm. OD. (PN 8) metre 50.00 1057.30 52,865.00

160 mm. OD. (PN 8) metre 150.00 2101.40 3,15,210.00

200 mm. OD. (PN 8) metre 10.00 3192.00 31,920.00

3 Supply, fixing in position, testing ISI marked cast iron double flanged sluice valves as per

IS:14846-2000, (PN 10) with SS stem, bolts, nuts, 3 mm thick rubber gaskets including

transporting to worksite, Complete as per drawings & directions of the Engineer-in-charge. (MAKE : Kirloskar /Venus / IVC / Zaloto / Audco)

100 mm nominal dia Each 4.00 10201.10 40,804.40



4 Providing and laying cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone agg. 20

mm nominal size) for thrust blocks at bends and junctions of water lines including necessary

excavation, centering, shuttering etc as directed and required at site to complete the work..Cum. 3.00 5639.20 16,917.60

Signature of EPIL

11 / 14

EXT SWD BOQ


S.


5 Constructing brick masonry chamber 600 x 600 x 1050 mm inside with F.P.S. brick work in

cement mortar 1:4 (1 cement : 4 coarse sand) for Sluice Valve, necessary excavation,

foundation concrete 1:4:8 (1 cement : 4 coarse sand: 8 graded stone aggregate 40 mm nominal

size) and inside plastering with cement mortar 1 : 3 (1 cement : 3 coarse sand ) 12 mm thick

finished with a floating coat of neat cement complete as per standard design including fixing

of CI/SFRC cover and frame in 150 mm thick cement concrete 1:2:4 (1cement : 2 coarse sand : 4

gradded stone aggregate of 20 mm nominal size) including centering, shuttering, excavation,

refilling and disposal of surplus earth as directed complete in all respects. (The cost of cover and

frame shall be seperate) Each 8.00 7315.00 58,520.00

6 Providing Precast Cement Concrete / SFRC Valve Chamber cover and frame conforming to IS :

12592-2002., The concrete mix should be not less than M 30.Heavy duty, HD-20 grade designation - 600x600 mm internal size. Each 8.00 3059.00 24,472.00

[A] 6,74,520.30

6,74,520.30

PUMPING MACHINERY

IMPORTANT NOTES :

a) The Tenderer must submit along with his offer, the make and the model of the pump unit

proposed by him.

b) Required power supply would be made available to the main distribution panel by other

agency. Cabling from main distribution board to motor control centre (MCC) for each package and

from MCC to individual pump is in the scope of this contract.c) Wherever mechanical seal has been asked for, it must be `factory fitted` at pump

manufacturer`s works.

SUBMERSIBLE DRAINAGE PUMPS

Supply, installing, testing and commissioning drainage pumping system in the sumps of

plant room comprising of the following:

SECTION-IV

TOTAL

Signature of EPIL

12 / 14

EXT SWD BOQ


S.


a) 2 Nos.Vertical fully floodable type submersible drainage pumps in close coupled design

single stage, suitable for handling minimum 12 mm dia solids.Duty

Discharge of each pump : 9 M3/hr.

Working Head : 10 M

Material of Construction (M.O.C):

Corrosion Resistant in general : Bearings — Anti friction,

prelubricated ball bearings,

packed with grease for life. Motor: — Dry Motor with built in over

load protection Protection - IP68.

Insulation Class - F

b) Electric control panel for automatic operation of pumps as per the water level in the sump.The

pump operation shall be controlled with magnetic float type level controller.The Panel shall

comprise of incoming MCB, digital voltmeter & ammeter, On-Off lamps, starters with circuit

breakers for each pump, rotating start sequence, both pumps to work simultaneously to

meet peak flow

There shall be an audio-visual alarm, if any pump fails to start.c) Power cabling between panel and pumps.

NS d) Pump suspension systemwith Stainless Steel Sling wire with `U` clamp. Set 1.00 167580.00 1,67,580.00

Details of Pump offered

(To be filled in by the tenderer)Make:

Model:

HP/KW:

M.O.C : Casing —………………..

: Impeller — ……………..

: Shaft — ……………….

TOTAL for Submersible Drainage Pumps 1,67,580.00

Signature of EPIL

13 / 14

EXT SWD BOQ


S.


MR Liasioning and Installation charges for Electricity Board and Gram panchayath

On reciept of official challans, payments will be released to the contractor JOB 1.00 1700000.00 17,00,000.00

TOTAL (SECTION-V) 17,00,000.00

TUBE WELLSBoring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I),

including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire &

running charges of all equipments, tools, plants & machineries,submersible pump of suitable capacity required for

the job, all complete as per direction of Engineer -in-charge,

Rocky strata including Boulders( 1000 feet)

6" dia 3 Job 1 565000.00 16,95,000.00

16,95,000.00

SECTION-VI

TOTAL (SECTION-VI)

SECTION-V

Signature of EPIL

14 / 14

EXT SWD BOQ


DSR 2014 NON-DSR

IV ROAD WORK 30490056.84

V DRAINAGE 59211.00

VI HORTICULTURE AND LAND SCAPING 129385.00

TOTAL 30678652.84 0.00

GRAND TOTAL 30678652.84

PROPOSED CONSTRUCTION OF EXTERNAL DEVELOPMENT & BULK SERVICES (CIVIL & ELECTRICAL WORKS)

29th BATTALION FOR ITBP AT JABALPUR (M.P.)

S.NO NAME OF SUB-HEADAMOUNT

SUMMARY OF COST

ROAD WORK, HORTICULTURE, EARTH WORK & SIGNAGES

Signature of EPIL

1 / 1

ROAD WORK SUMMARY


V

14 19.6 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars

jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine

sand) including testing of joints etc. complete :19.6.2 150 mm dia. R.C.C. pipe R.M 170.00 348.30 59,211.00

59,211.00

VI

Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the

excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and

mixing withsludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by

20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water,

filling with earth if necessary, watering and finally fine dressing, leveling etc.including stacking and

disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed,

within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for

separately).

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or

sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part

of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of

rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if

needed to be paid for separately) :

cum 1145.00 113.00 1,29,385.00

1,29,385.00

HORTICULTURE AND LAND SCAPING 23.0

BILL OF QUANTITIES

ROAD WORK, HORTICULTURE & EARTH WORK

S

NoDSR -2014 DESCRIPTION UNIT QTY

[TOTAL V]

RATE

(in Rs)

AMOUNT

(in Rs)

DRAINAGE 19.0

Signature of EPIL

1 / 1

ROAD WORK BOQ



I CIVIL WORKS 2285256.05 0.00

II PLUMBING WORK 1368070.00

III INTERNAL ELECTRICAL WORK 30735.19 23826.80

TOTAL 2315991.24 1391896.80

GRAND TOTAL



PUMP ROOM & UNDERGROUND WATER TANK

SUMMARY OF COST

3707888.04

Signature of EPIL

1 / 1

PUMP ROOM & UGT SUMM


DSR 2012 NON-DSR

I EARTH WORK 109527.50

II CONCRETE WORK 129165.95

III REINFORCED CEMENT CONCRETE 1327513.55

IV BRICK WORK 84086.80

V STEEL WORK 24036.40

VI FLOORING 285787.50

VII FINISHING 53604.45

VIII WATER SUPPLY 2494.05

IX DRAINAGE 11185.10

X WATER PROOFING 257854.75

TOTAL 2285256.05 0.00


Proposed construction of external development & bulk services (civil & electrical works) for ITBP

at Kalikiri, Chittoor (A.P)

CIVIL WORK


SUMMARY OF COST

PUMP ROOM & UNDER GROUND TANK

Signature of EPIL

1 / 1

PUMP ROOM & UGT CIVIL SUMMARY


I

1 2.6 Earth work in excavation by mechanical means (Hydraulic excavator) / manual

means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm

on plan) including disposal of excavated earth, lead upto 50m and lift upto

1.5m, disposed earth to be levelled and neatly dressed.2.6.1 All kinds of soil. Cu.M 158.00 155.60 24584.80

2 2.7 Earth work in excavation by mechanical means (Hydraulic excavator) / manual

means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm

on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5

m, disposed earth to be levelled and neatly dressed.2.7.1 Ordinary Rock Cu.M 262.00 244.60 64085.20

4 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of

foundations etc. in layers not exceeding 20cm in depth, consolidating Each

deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Cu.M 55.00 85.05 4677.75

5 2.26 Extra for every additional lift of 1.5 m or part thereof in excavation /banking

excavated or stacked materials.2.26.2 Ordinary or hard rock. Cu.M 150.00 82.95 12442.50

6 2.28 Surface dressing of the ground including removing vegetation and in-equalities

not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto

1.5 m.2.28.1 All kinds of soil. 100 Sq.M 3.00 1245.75 3737.25

[TOTAL I] 109527.50

II

7 4.1 Providing and laying in position cement concrete of specified grade excluding

the cost of centering and shuttering - All work upto plinth level.

EARTH WORK 2.0

CONCRETE WORK 4.0

BILL OF QUANTITIES


S


RATE

(in Rs)

AMOUNT

(in Rs)

Signature of EPIL

1 / 10

PUMP ROOM & UGT BOQ


S


RATE

(in Rs)

AMOUNT

(in Rs)

4.1.8 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal

size)

Cu.M 15.00 4301.15 64517.25

8 4.2 Providing and laying cement concrete in retaining walls, return walls, walls

(any thickness) including attached pilasters, columns, piers, abutments, pillars,

posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks,

anchor blocks, plain window sills, fillets, sunken floor,etc., up to floor five

level, excluding the cost of centering, shuttering and finishing :

4.2.3 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal

size)

Cu.M 3.00 6450.00 19350.00

4.2.5 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal

size).

Cu.M 3.00 5818.00 17454.00

9 4.10 Providing and laying damp-proof course 40mm thick with cement concrete

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal

size).

Sq.M 8.00 257.80 2062.40

10 4.12 Extra for providing and mixing water proofing material in cement concrete work

in doses by weight of cement as per manufacturer’s specification.

per Bag

of 50 kg

cement

2.00 48.15 96.30

11 4.13 Applying a coat of residual petroleum bitumen of grade of VG-10 of approved

quality using 1.7kg per square metre on damp proof course after cleaning the

surface with brushes and finally with a piece of cloth lightly soaked in kerosene

oil.

Sq.M 4.00 132.00 528.00

12 4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3

coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick

bed of dry brick ballast 40 mm nominal size, well rammed and consolidated

and grouted with fine sand including finishing the top smooth

Sq.M 60.00 419.30 25158.00

[TOTAL II] 129165.95


Signature of EPIL

2 / 10

PUMP ROOM & UGT BOQ


S


RATE

(in Rs)

AMOUNT

(in Rs)

13 5.9 Centering and shuttering including strutting, propping etc. and removal of form

for :(a) 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete. Sq.M 20.00 196.45 3929.00

(b) 5.9.2 Walls (any thickness) including attached pilasters, butteresses, plinth and

string courses etc.

Sq.M 350.00 360.80 126280.00

(c) 5.9.3 Suspended floors, roofs, landings, balconies and access platform. Sq.M 150.00 401.65 60247.50

(d) 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. Sq.M 60.00 332.15 19929.00

(e) 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts. Sq.M 30.00 453.35 13600.50

(f) 5.9.7 Stairs, (excluding landings) except spiral-staircases. Sq.M 5.00 395.65 1978.25

(g) 5.9.15 Small lintels not exceeding 1.5m clear span, moulding as in cornices, window

sills, string courses, bands, copings, bed plates, anchor blocks and the like.

Sq.M 3.00 196.45 589.35

(h) 5.9.16 Edges of slabs and breaks in floors and walls.5.9.16.1 Under 20 cm wide Sq.M 80.00 116.40 9312.00

(i) 5.9.19 Weather shade, Chajjas, corbels etc., including edges. Sq.M 2.00 492.35 984.70

14 5.22 Steel reinforcement for R.C.C. work including straightening, cutting, bending,

placing in position and binding all complete upto plinth level.5.22.6 Thermo-Mechanically Treated bars. Kg 8000.00 68.10 544800.00

15 5.22A Steel reinforcement for R.C.C. work including straightening, cutting, bending,

placing in position and binding all complete above plinth level.5.22A.6 Thermo-Mechanically Treated bars. Kg 1000.00 68.10 68100.00

16 5.30 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C

Projections

R.M 4.00 30.75 123.00

17 5.33 Providing and laying in position machine batched and machine mixed design

mix M-25 grade cement concrete for reinforced cement concrete work, using

cement content as per approved design mix, including pumping of concrete to

site of laying but excluding the cost of centering, shuttering, finishing and

reinforcement, including admixtures in recommended proportions as per IS:

9103 to accelerate, retard setting of concrete, improve workability without

impairing strength and durability as per direction of Engineer-in-charge.

(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less

cement used as per design mix is payable/recoverable separately).

Signature of EPIL

3 / 10

PUMP ROOM & UGT BOQ


S


RATE

(in Rs)

AMOUNT

(in Rs)

(a) 5.33.1 All works upto plinth level. Cu.M 65.00 6269.15 407494.75

(b) 5.33.2 All works above plinth level upto floor V level. Cu.M 10.00 7014.55 70145.50

1327513.55

IV

18 6.34 Brick work with common FLYASH bricks of class designation 7.5 in foundation

and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) Cu.M 6.00 6006.20 36037.20

19 6.34 Brick work with common FLYASH bricks of class designation 7.5 in

superstructure above plinth level up to floor V level in all shapes and sizes in :

6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cu.M 8.00 6006.20 48049.60

TOTAL [IV] 84086.80

V

20 10.5 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm

angle iron and 3mm M.S. gusset plates at the junctions and corners, all

necessary fittings complete, including applying a priming coat of approved

steel primer.10.5.1 Using M.S. angels 40x40x6 mm for diagonal braces. Sq.M 4.00 3073.85 12295.40

21 10.14 Providing and fixing pressed steel door frames confirming to IS:4351

manufactured from commercial mild steel sheet of 1.60mm thickness including

hinges jamb, lock jamb, bead and if required angle threshold of mild steel

angle of section 50x25 mm, or base ties of 1.60mm, pressed mild steel welded

or rigidly fixed together by mechanical means, including M.S. pressed butt

hinges 2.5mm thick with mortar guard,lock strike-Plate nad shock absorbers as

specified and applying a coat of approved steel primer after pre-treament of

the surface as directed by Engineer-in Charge.10.14.1 Profile B10.14.1.1 Fixing with adjustable lug with split end tail to Each jamb. R.M 15.00 377.70 5665.50

TOTAL [III]

BRICK WORK 6.0

STEEL WORK 10.0

Signature of EPIL

4 / 10

PUMP ROOM & UGT BOQ


S


RATE

(in Rs)

AMOUNT

(in Rs)

22 10.25 Steel work welded in built up sections/ framed work including cutting, hoisting,

fixing in position and applying a priming coat of approved steel primer using

structural steel etc. as required.10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar

works.

Kg 50.00 90.10 4505.00

23 10.26 Providing and fixing hand rail of approved size by welding etc. to steel ladder

railing, balcony railing, staircase railing and similar works, including applying a

priming coat of approved steel primer.10.26.1 M.S. tube. Kg 15.00 104.70 1570.50

24036.40

VI

24 11.3 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate) finished with a floating coat of neat cement including cement slurry,

but excluding the cost of nosing of steps etc. complete.11.3.1 40mm thick with 20mm nominal size stone aggregate. Sq.M 80.00 353.35 28268.00

25 MR Madanapalli slab flooring over 20 mm (average) thick base laid over and

jointed with grey cement slurry mixed with pigment to match the shade of the

slab including rubbing and polishing complete with base of cement mortar 1 : 4

(1 cement : 4 coarse sand) :25 mm thick. Sq.M 60.00 1364.00 81840.00

26 MR Madanapalli slabs 20 mm thick in risers of steps, skirting, dado and pillars laid

on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and

jointed with grey cement slurry mixed with pigment to match the shade of the

slabs, including rubbing and polishing complete.

Sq.M 8.00 1364.00 10912.00

TOTAL [V]

FLOORING 11.0

Signature of EPIL

5 / 10

PUMP ROOM & UGT BOQ


S


RATE

(in Rs)

AMOUNT

(in Rs)

27 11.36 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS :

15622 (thickness to be specified by the manufacturer ) of approved make in all

colours, shades except burgundy, bottle green, black of any size as approved

by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick

bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey

cement slurry @ 3.3kg per sqm including pointing in white cement mixed with

pigment of matching shade complete.

Sq.M 150.00 836.65 125497.50

28 11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be

specified by the manufacturer) of 1st quality conforming to IS : 15622 of

approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on

20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing

the joints with white cement and matching pigment etc., complete.

Sq.M 50.00 785.40 39270.00

285787.50

VII

29 13.2 15 mm cement plaster on the rough side of single or half brick wall of mix :13.2.2 1:6 (1 cement: 6 fine sand) Sq.M 50.00 172.80 8640.00

30 13.4 12 mm cement plaster of mix :13.4.1 1:4 (1 cement: 4 coarse sand) Sq.M 60.00 172.30 10338.00

31 13.16 6 mm cement plaster of mix :13.16.1 1:3 (1 cement: 3 fine sand) Sq.M 150.00 134.70 20205.00

32 13.18 Neat Cement punning Sq.M 60.00 41.40 2484.00

33 13.37 White washing with lime to give an even shade:13.37.1 New work (three or more coats) Sq.M 40.00 16.20 648.00

34 13.41 Distempering with oil bound washable distemper of approved brand and

manufacture to give an even shade13.41.1 New work (two or more coats) over and including water thinnable priming coat

with cement primer.

Sq.M 60.00 89.70 5382.00

35 13.47 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone

additives of required shade

[TOTAL VI]

FINISHING 13.0

Signature of EPIL

6 / 10

PUMP ROOM & UGT BOQ


S


RATE

(in Rs)

AMOUNT

(in Rs)

13.47.1 New work (Two or more coats applied @ 1.43 ltr/ 10 Sq.M. over and including

priming coat of exterior primer applied @ 2.20 kg/ 10 Sq.M).New work (Two or

more coats applied @ 1.43 ltr/ 10 Sq.M. over and including priming coat of

exterior primer applied @ 2.20 kg/ 10 Sq.M).

Sq.M 50.00 94.95 4747.50

36 13.50 Applying priming coat :13.50.4 With ready mixed red oxide zinc chromate primer of approved brand and

manufacture on steel work (second coat)

Sq.M 3.00 14.65 43.95

37 13.61 Painting with synthetic enamel paint of approved brand and manufactrur to

given an even shade:13.61.1 Two or more coats on new work Sq.M 15.00 74.40 1116.00

53604.45

VIII

38 18.10 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c

cutting and making good the walls etc.a) 18.10.3 25 mm dia. nominal bore R.M 3.00 304.15 912.45

b) 18.10.6 50 mm dia. nominal bore R.M 3.00 527.20 1581.60

2494.05

IX

[TOTAL VIII]

WATER SUPPLY 18.0

[TOTAL VII]

DRAINAGE 19.0

Signature of EPIL

7 / 10

PUMP ROOM & UGT BOQ


S


RATE

(in Rs)

AMOUNT

(in Rs)

39 19.16 Providing orange colour safety foot rest of minimum 6 mm thick plastic

encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786

having minimum cross section as 23 mmx25mm and over all minimum length

263 mm and width as 165mm with minimum 112 mm space between protruded

legs having 2 mm tread on top surface by ribbing or chequering besides

necessary and adequate anchoring projections on tail length on 138 mm as per

standard drawing and suitable to with stand the bend test and chemical

resistance test as per specifications and having manufacture's permanent

identification mark to be visible even after fixing, including fixing in manholes

with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6

graded stone aggregate 20 mm nominal size) complete as per design.

Eah 25.00 311.60 7790.00

40 19.19 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of

required shape and approved quality19.19.1 L D -2.5

19.19.1.1 Rectangular shape 600x450mm internal dimensions Each 3.00 1131.70 3395.10

11185.10

X WATER PROOFING 22.0

[TOTAL IX]

Signature of EPIL

8 / 10

PUMP ROOM & UGT BOQ


S


RATE

(in Rs)

AMOUNT

(in Rs)

41 22.1 Providing and laying integral cement based treatment for water proofing on

horizontal surface at all depth below ground level for under ground structures

as directed by Engineer-in-Charge and consisting of : i) Ist layer of 22mm to

25mm thick approved and specified rough stone slab over a 25mm thick base

of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing

compound conforming to IS:2645 in the recommended proportion over the

leveling course (leveling course to be paid separately). Joints sealed and

grouted with cement slurry mixed with water proofing compound. ii) 2nd layer

of 25mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water

proofing compound in recommended proportions. iii) Finishing top with stone

aggregate of 10mm to 12mm nominal size spreading @ 8 cudm/sqm

thoroughly embedded in the 2nd layer.

22.1.1 Using rough kota stone. Sq.M 130.00 1022.45 132918.50

42 22.2 Providing and laying integral cement based treatment for water proofing on the

vertical surface by fixing specified stone slab 22 mm to 25mm thick with

cement slurry mixed with water proofing compound conforming to IS:2645 in

recommended proportions with a gap of 20mm (minimum) between stone slabs

and the receiving surfaces and filling the gaps with neat cement slurry mixed

with water proofing compound and finishing the exterior of stone slab with

cement mortar 1:3 (1 cement : 3 coarse sand) 20mm thick with neat cement

punning mixed with water proofing compound in recommended proportion

complete at all levels and as directed by Engineer-in-charge :

22.2.1 Using rough Kota stone Sq.M 80.00 1243.25 99460.00

Signature of EPIL

9 / 10

PUMP ROOM & UGT BOQ


S


RATE

(in Rs)

AMOUNT

(in Rs)

43 22.7 Providing and laying integral cement based water proofing treatment including

preparation of surface as required for treatment of roofs, balconies, terraces

etc consisting of following operations: a) Applying a slurry coat of neat cement

using 2.75 kg/sqm. of cement admixed with water proofing compound

conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab

including adjoining walls upto 300mm height including cleaning the surface

before treatment. b) Laying brick bats with mortar using broken bricks/brick

bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5

coarse sand) admixed with water proofing compound conforming to IS : 2645

and approved by Engineer-in-charge over 20 mm thick layer of cement mortar

of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound

conforming to IS : 2645 and approved by Engineer-in-charge to required slope

and treating similarly the adjoining walls upto 300 mm height including

rounding of junctions of walls and slabs c) After two days of proper curing

applying a second coat of cement slurry using 2.75kg/ sqm of cement admixed

with water proofing compound conforming to IS : 2645 and approved by

Engineer-in-charge. d) Finishing the surface with 20 mm thick jointless cement

mortar of mix

1:4 (1 cement :4 coarse sand) admixed with water proofing compound

conforming to IS : 2645 and approved by Engineer-in-charge including laying

glass fibre cloth of approved quality in top layer of plaster and finally finishing

the surface with trowel with neat cement slurry and making pattern of 300x300

mm square 3mm deep. e) The whole terrace so finished shall be flooded with

water for a minimum period of two weeks for curing and for final test. All above

operations to be done in order and as directed and specified by the Engineer-in-

Charge :22.7.1 With average thickness of 120mm and minimum thickness at khurra as 65 mm. Sq.M 25.00 1019.05 25476.25

[TOTAL XIII]257854.75

Signature of EPIL

10 / 10

PUMP ROOM & UGT BOQ


DSR 2012 NON-DSR

1 PUMP HOUSE EQUIPMENTS 1368070.00

Total C/F To Summary 1368070.00



Chittoor (A.P)

SUMMARY OF COST


PLUMBING WORK


Signature of EPIL

1 / 1

PUMP ROOM& UGT PLUMBING SUMMARY


SNo DESCRIPTION QTY UNIT RATE (Rs.) AMOUNT (Rs.)

APUMPS, PANELS AND RELATED PIPES & ACCESSORIES (WITHIN

PUMP ROOM)

Providing, fixing and testing in position ISI marked (IS : 1239) G.I pipes

(heavy class) manufactured from seamless pipes, in concealed or exposed

works complete with all necessary G.I fittings i.e. sockets, elbows, tees,

bends, unions, plugs and clamps including cutting chases and making good

the walls (on terrace the pipes shall be supported at suitable interval and

inside ducts these shall be properly clamped through duct walls). The

Galvanization shall conform to IS : 4736. The work shall include the painting

with two coats of anti-corrosive paints on buried and concealed pipe works

and with two coats enamel paint of approved quality and shade over a coat of

primer on exposed pipe works, complete as required by the Engg-in-charge

for proper completion of the work.

(Make : Jindal(Hissar) / Prakash Surya / Jotindra)

80mm nominal bore (wall thickness - 4.8 mm) 11 R.M. 1,263.00 13,893.00



1

BILL OF QUANTITIES

PLUMBING WORKS

Signature of EPIL

1 / 7

PUMP ROOM& UGT PLUMBING BOQ



Providing and fixing in position M.S. / G.I. pipe one side flanged sleeves of

upto 600 mm long (heavy class) with M.S. puddle flange fabricated out of 6

mm thick MS plate in RCC walls of water tanks / retaining walls during the

time of casting the same including hot dipped galvanization after fabrication

and painting with two coats of anti corrosive paint over primer.

100 NB 3 Nos. 3,990.00 11,970.00

150 NB 1 Nos. 5,320.00 5,320.00

Providing and fixing in position M.S. / G.I. pipe both side flanged sleeves of





80 NB 1 Nos. 3,325.00 3,325.00

150 NB 1 Nos. 5,985.00 5,985.00

Providing and fixing in position M.S. / G.I. pipe one side screwed sleeves of





80 NB 3 Nos. 1,995.00 5,985.00

2

3

4

Signature of EPIL

2 / 7




Supply, installing, testing and commissioning of non clog submersible type

drainage / dewatering pump suitable for automatic operation, float valve

operated, automatic / manual operation, including NRV & all accessories, nlet

& outlet arrangements, required cable etc. complete in all respects. (Make :

Grundfos / ITT / WILO / DP / Nocchi / KSB)

3 lps at 10 meter, 10 mm max particle size, 50 Hz, 240 volts, IP 68, F

insulation, Float level switches, impeller in CI / Polypropylene, casing in CI /

polyurethan and shaft in stainless steel (1 set comprises of two number

dewatering pumps)

1 Set 1,33,000.00 1,33,000.00

Supply & fixing in position ISI marked cast iron double flanged butterfly

valves (PN 16) as per IS:13095, with SS disc, shaft, seating rings, internal

fastening, nuts, bolts including transporting to worksite, 3 mm thick rubber

gaskets etc. including testing, Complete as per drawings & directions of the

Engineer-in-charge.

(MAKE : Venus / IVC / SKS / Zoloto / Audco / Advance / CRI)

80 mm nominal dia2 Nos. 4,515.00 9,030.00

150 mm nominal dia2 Nos. 10,327.00 20,654.00

Providing & fixing cast iron body strainer made up of SS screen tested to a

min. pressure of 15 kg/sqcm complete with flanged ends as required. (make

: CIM / Zoloto / Audco / Advance)

150 mm nominal bore 1 Nos. 16,558.00 16,558.00

5

6

7

Signature of EPIL

3 / 7




Providing, fixing, testing and commissioning of three phase, 50 HZ, AC, PLC

based, vertical inline multi stage variable cum fixed speed hydropneumatic

pumping sets, in SS MOC (Impeller - SS 304, Shaft - 316), housing in cast

iron, enclosure class IP 55, Insulation F class, electrical control panel with

contactors, relays, circuit breakers, starters, branch ammeters, incoming

voltmeter, selector switches, equal load sharing, low level guard and other

protection as per manufacturers specifications complete with common base

frame, pressure gauge on the delivery side including non-return valve,

isolating valves on suction and delivering sides, suction and delivery headers,

pressure tanks bladder/diaphragm type with pre-pressurized air, complete in

all respects. The booster pumps shall consistes of 3 nos. hydropneumatic

pumps (1 variable speed and 2 fixed types in configuration of 2 pumps

working and 1 pump stand by). The Complete pumping system and panel

shall be assembled and tested at the pump manufacturer factory. Systems

assembled by the dealers locally will not be accepted.

(Make : Grundfos / WILO / ITT)

Discharge : 300 lpm (each) at 70 meter head, 2900 rpm, 415 volts, 50 HZ, 2 x

170 liters pressure tanks. 1 Set 8,64,500 8,64,500.00

8

Signature of EPIL

4 / 7




9 Providing, fixing, testing and commissioning of electrical control panel for

water supply pumps / equipments with magnetic type level controllers and

digital type level indicators. The panel will be suitable for automatic start-stop

arrangement of water supply pumps and other equipments as required. The

panel will have necessary indication & protection, Star delta starters for above

5 HP pumps & DOL Starters for upto 5 HP pumps, digital ammeter &

voltmeter with selector switches on incomer and ammeter with selector switch

on all outgoing feeders, phase indicating lights, pump ON / OFF lights, power

ON / OFF lights, switches for auto-manual operation of pumps, cyclic

convertor for alternate running of working and stand by pumps, overload

relays, single phasing preventor, dry suction cut off, necessary contactors

inclusive of SS level sensing probes to be installed in water reservoirs for the

proper completion of the system.

The system will include Digital type multi level indicator display system of

water levels for 2 nos water tanks / compartments.

The control panel will be floor / wall mounted type fabricated out of 14 SWG

CRCA MS sheet, IP 54 enclosure, duly powder coated of min. 60 micron

thickness of standard seimens grey shade over primer coats with 7 tank

treatment for degreasing, derusting, phosphatising & passivation complete.

The panel will be compartmentlized with front operation having Separate bus

bar and cable alley chamber, ventillation louvers, 415 V electrolitic Aluminium

Bus Bar, removable gland plates, cable glands, including connection with

outgoing feeders complete in all respect.

Signature of EPIL

5 / 7




The MCCB shall be Ics = 100% Icu, with rotary handle & pad locking

arrangement, with trip setting as per load requirement. TP MCCB shall be with

solid isolable neutral link. The breaking capacity specified is Ics value. The

MCCB shall be of thermo magnetic type. All outgoing MCB's shall be C type

with 10 KA breaking capacity.

The system is inclusive of suitable PVC insulated armoured multi core copper

control cable FRLS grade of required length with supporting arrangements for

the proper completion of the system.

The suitable size PVC / XLPE insulated armoured aluminium conductor

power cable from control panel to pumps will be included in above item along

with terminations, cable glands & cable trays etc as required. (Cable Make :

Universal / CCI / NICCO / Finolex / Polycab / Skytone)

The following pumps shall be controlled by the panel :

(a) One set of Hydropneumatic water transfer pump set control panel. (The

control panel of hydropneumatic pumps will be supplied by the pump

manufacturer) (To cut off pump when water level is low in suction tank)

(b) Two sets of tubewell submersible pumps (To cut off pump when water

level is high in delivery tank and start when delivery water tank level is low)

(c) One set of filter feed pump of water treatment unit. (To cut off pump when

water level is high in delivery tank and start when delivery water tank level is

low)

Signature of EPIL

6 / 7




(d) 1 nos. Dewatering Pump Control unit for two nos. single phase pumps, to

operate Pumps alternatively and in case of Excess inflow into the Sump, Both

Pumps Will Start Automatically With Audio, Visual & Alarm Including All

Standard Accessories Like Ammeter, Auto Manual switch, DOL Starter,

Indicating Lights, And Pumps On/ Off Lights, Protection MCB, Etc.

(Panel Make : Elegant / Aqua / Advance / Adlec / Ambit / Tricolite / Milestone /

Vidyut control / ASES (Agni Suraksha), Swithgear & accessories make : ABB

/ Schnieder / L&T / Seimens)

INCOMER : 125 AMP FP MCCB (25 KA)

BUS BAR : 200 AMP, 500 Volts, 3 phase 50 HZ TPN high conductivity

electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable

sleeves. The current density of bus bar shall be minimum 1.00 sq mm / amp.

OUT GOINGS :

1 no 63 AMP TP MCCB (25 KA) - for hydropneumatic pump set panel

2 no 16 AMP TP MCB (10KA) - for filter feed pumps

2 no 25 AMP TP MCB (10KA) - for tubewell pump

1 no 20 AMP DP MCB (10KA) - for dewatering pumps control unit

2 no 20 AMP TP MCB (10KA) - for spare

8 no 6 / 10 / 16 Amp DP MCB (10KA) - for Light / fan / spares 1 Set 2,39,400.00 2,39,400.00

13,68,070.00 TOTAL OF SUBHEAD A

Signature of EPIL

7 / 7



S. NO DESCRIPTION DSR-2012 NON-DSR

I INTERNAL WIRING 24537.00 12806.50

II DISTRIBUTION BOARDS & MCB's 1276.30

III EARTHING SYSTEM 4279.49

IV MISCELLANEOUS 4381.00

V INTERNAL LIGHTING FIXTURES & FANS 642.40 6639.30

TOTAL 30735.19 23826.80

GRAND TOTAL


Chittoor (A.P)

SUMMARY OF COST

INTERNAL ELECTRICAL

PUMP ROOM & UNDERGROUND TANK

54561.99

Signature of EPIL

1 / 1

PUMP ROOM & UGT ELECT SUMMARY


S.No DSR-2014 DESCRIPTION UNIT QTY Rate Amount

SUB HEAD (I) :- INTERNAL WIRING (DSR)

Point wiring in PVC conduit, with piano type switch :-

Wiring for light point/fan point/exhaust fan point/call bell point

with 1.5 sqmm FR PVC insulated copper conductor single core cable

in surface / recessed PVC conduit, with piano type switch, phenolic

laminated sheet, suitable size M.S. box and earthing the point with 1.5

sqmm FR PVC insulated copper conductor single core cable etc. as

required.1.8.2 PT 5.00 543.00 2715.00

Power plug wiring in PVC conduit (2 x 4 sqmm.) :-1.12 Wiring for power plug with 2 x 4 sqmm. FR PVC insulated, copper

conductor single core cable in surface / recessed PVC conduit along

with 1 no 4 sqmm FR PVC insulated copper conductor single core cable

for loop earthing as required. M 1.00 162.00 162.00

Circuit / Sub main wiring in PVC conduit :-

Wiring for circuit / submain wiring alongwith earth wire with the

following sizes of PVC insulated, copper conductor single core cable in

surface/ recessed PVC conduit as required.1.14.10 4 x 6 sq.mm. + 2 x 6 sq.mm. Earth wire M 14.00 597.00 8358.00

1.14.11 4 x 10 sq.mm. + 2 x 10 sq.mm. Earth wire M 14.00 883.00 12362.00

S/F light plug point piano type accessories :-1.29 Supply and fixing metal box of 150 mm x 75 mm x 60 mm deep

(nominal size) on surface or in recess with suitable size of phenolic

laminated sheet cover in front including providing and fixing 3 pin

5/6 amps socket outlet and 5/6 amps. piano type switch, connection,

painting etc. as required. Each 2.00 194.00 388.00

S/F power plug point piano type accessories :-

4

5

BILL OF QUANTITIES

ELECTRICAL WORKS

1

2

3

Signature of EPIL

1 / 6

PUMP ROOM & UGT ELCT. BOQ



1.30 Supply and fixing metal box of 180 mm x 100 mm x 60 mm deep

(nominal size) on surface or in recess with suitable size of phenolic

laminated sheet cover in the front including providing and fixing 6 pin

5/6 & 15/16 amps socket outlet and 15/16 amp piano type switch,

connection, painting etc as required.Each 2.00 276.00 552.00

TOTALSUB HEAD (I) (DSR) 24537.00

SUB HEAD (I) :- INTERNAL WIRING (NON DSR)1 Supply all materials, receiving, storing, handling, fixing, laying, wiring and testing

for power outlets using ISI marked (IS:694) single core, flexible, flame

retardant low smoke (FRLS), stranded copper conductors PVC insulated 1100

Volt grade wiring in concealed/ exposed system using 20/25 mm ERW black

stove enamelled screwed type, ISI marked rigid steel conduit of wall thickness

16 SWG conforming to IS 9537 part II including all conduit accessories, such as

bends, tees, draw boxes, MS point control boxes with zinc plating and yellow

passivation, together with wiring accessories such as white modular plate type

switches and sockets, cover plate, grid plate etc. including submain wiring

from DB to outlet with Cu earth continuity wire, conduit being laid in recess

(concealed) either in ceiling slab / wall, chasing on surface or under false ceiling

including required clamping arrangement and required length of MS flexible

conduit or in wooden partitions etc. complete as required at site.

a 20 amp SPN industrial metal clad outlet in MS box with 20 amp C series MCB and

metal plug top instead of modular switch & sockets by 2x6 + 4 sq mm copper

wires. 2 NOS 5812.00 11624.00

b 3 pin 16 amp shuttered socket outlet connected to AC switch by 2x4 + 2.5 sq

mm copper wires. (A C socket outlet provided outside at about 2500 mm height).

The AC switch will be provided under separate item as below.1 NOS 1182.50 1182.50

TOTAL SUB HEAD (I) NON DSR 12806.50

SUB HEAD (II) :- DISTRIBUTION BOARDS & MCB's

Supplying and fixing 5 amps. to 32 amps. rating, 240 volts `C' series,

miniature circuit breaker (MCB)suitable for inductive load of

following poles in the existing MCB DB complete with connections,


2.52.1 single pole Each 1.00 125.00 125.00

2.52.3 single pole and neutral Each 323.20

2.52.4 triple pole and neutral Each 1.00 667.50 667.50

5

1

Signature of EPIL

2 / 6




2 2.53 Supplying & fixing single pole, blanking plate in the existing MCB DB

complete etc. as required. Each 1.00 2.50 2.50

Supplying and fixing following rating, double pole, 240 volts, isolator in the

existing MCB DB complete with connections, testing and commissioning

etc. as required.

2.54.1 40 amps. Each 1.00 220.70 220.70

2.54.2 63 amps. Each 1.00 260.60 260.60

Supplying and fixing following way, single pole and neutral, sheet

steel, SP MCB distribution board consumer unit , 240 volts, on

surface / recess, complete with tinned copper busbar, neutral busbar,

earth bar, din bar,hinged front acrylic cover for the MCB knobs,

detachable gland plate, interconnections, phosphatized and powder

painted including earthing etc. as required. (But without MCB / RCCB /

Isolator) 2.32.3 2 + 12 way SPN Each 1001.50

Supplying and fixing following way, three pole and neutral, sheet steel, TP MCB

distribution board, 415 volts,on surface /recess, complete with tinned

copper busbar, neutral busbar, earth bar, din bar, detachable gland plate,

interconnections, phosphatized and powder painted including earthing etc. as

required (But without MCB / RCCB / Isolators).

2.33.4 4 way (4 + 12), Double door, horizontal type Each R.O 1743.60

TOTAL SUB HEAD (II) DSR 1276.30

3

4

5

Signature of EPIL

3 / 6




SUB HEAD (III) :- EARTHING SYSTEM

1 3.5 Earthing with GI earth plate 600mm x 600 mm x 6mm thick including

accessories and providing masonary enclosure with cover plate having

locking arrangement and watering pipe etc. (but without charcoal or

coke and salt ) complete as required. Set 1.00 2108.00 2108.00

2 3.7 Extra for using salt and charcoal for G.I. or copper plate earth

electrode as required. Set 1.00 801.99 801.99

3 3.12 Supplying and laying 6 SWG G.I. wire at 0.50 M. below ground level

for conductor earth electrode, including soldering etc as required.M 10.00 79.80 798.00

4 3.15 Providing and laying earth connections from earth electrode with 6

SWG dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as

required. M 5.00 114.30 571.50

TOTAL SUB HEAD (III) DSR 4279.49

Signature of EPIL

4 / 6




SUB HEAD (IV) :- MISCELLANEOUS

1 Providing, Laying and jointing of Spigot & socket type RCC NP-3

pipes suitable for rubber ring joints including rings, testing of joints

etc. for cable laying along roads, under road crossings or for entry into

the building as required.MR 150 mm dia. M 2.00 352.45 704.90

2 Providing, Laying 150 mm thick PCC 1:2:4 (1 cement : 2 coarse sand :

4 stone aggregate) all round RCC pipes for cable laying. The PCC shall

be cured as required. MR 150 mm diameter RCC Pipe CUM 1.00 3676.10 3676.10

TOTAL SUB HEAD (IV) NON DSR 4381.00

Signature of EPIL

5 / 6




SUB HEAD (V) :- INTERNAL LIGHTING FIXTURES & FANS

SUPPLY OF LIGHTING FIXTURES

Supply of wall / ceiling surface mounted fluorescent tube light

luminaires with all accessories as per standard item ballasts, starters,

capacitor, control gear box, including required nos. fluorescent tube etc

complete as required as per the standard catalogue item.

MR 1 x 18 watt Slimlite plus (Philips TMS 500/118) Nos 2.00 774.00 1548.00

MR 1 x 36 watt Slimlite (Philips TMS 500/136) Nos 2.00 945.65 1891.30

SUPPLY OF CEILING & EXHAUST FANS

Supply of AC 230/250 volts, 50 HZ ceiling fan with standard down

rod, blades, 2 nos. caps etc. complete (Make : Bajaj / Crompton)

1400 mm sweep

Supply of AC 230/250 volts, 50 HZ exhaust fans including providing

nuts, bolts, mounting frame and other accessories etc. complete

(Make : Bajaj / Crompton Khaitan)MR 300 mm sweep 1400 rpm Nos 2.00 1600.00 3200.00

TOTAL SUB HEAD (V) NON DSR 6639.30

ERECTION OF LIGHTING FIXTURES AND FANS

1 1.35 Erection of wall bracket / ceiling fittings of all sizes and shapes

containing upto two GLS lamps per fitting, complete with all accessories

including connections etc. as required. Each 2.00 25.20 50.40

2 1.52 Installation of exhaust fan upto 450 mm sweep in the existing

opening, including making the hole to suit the size of the above fan,

making good the damage, connections, testing, commissioning etc. as

required. Each 2.00 296.00 592.00

TOTAL SUB HEAD (V) DSR 642.40

1

1

2

Signature of EPIL

6 / 6



S.

NO. DESCRIPTION DSR 2012 NON DSR

1 LT PANEL, FEEDER PILLARS AND CAPACITOR PANELS 1727543.00

2 CABLE & ACCESSARY 142606.10 1976434.00

3 MISCELLANEOUS 111996.00

4 EARTHING & LIGHTNING PROTECTION 551949.50

5 TWO POLE STRUCTURE 829920.00

6 D.G. 2467830.00

7 EXTERNAL LIGHTING SYSTEM 2411193.00

ELECTRICAL SUBSTATION 1875650.80 139827.48

TOTAL 2018256.90 10216692.98

GRAND TOTAL



SUMMARY OF COST

EXTERNAL ELECTRICAL & LIGHTING SYSTEM

12234949.88

Signature of EPIL

1 / 1

EXT. ELECT. & LIGHTING SUMMARY


S.No DSR 2012 DESCRIPTION QTY UNIT RATE AMOUNT

1 Main L.T. Panel

Suppy , installation, testing, Design, manufacture, supply inspection, handling,

assembling, affecting proper connections, testing and commissioning of 14 SWG

CRCA sheet steel fabricated cubical type Main L.T. Panel with PLC based load

manager, floor mounting, dust & vermin proof, front operated construction,

enclosure class - IP 52, powder coated after proper treatment with 9 tank process

with top/bottom removable gland plates, as required, double compression type

cable glands, earth bus, hinged and lockable doors to achieve dust and vermin

proof complete with all inter connections small wiring by min. 2.5 sq. mm. FRLS

copper wires, ckt labels etc. The Aluminium Bus Bar shall be of suitable length, 500

volts, 3 phase 50 Hz TPN, electrolytic aluminium as per IS 8623 . The panel feeders

shall be suitable for terminating suitable nos. 3.5 / 4 core armoured aluminium cable

or Aluminium Bus Duct as required.

All Incoming / bus coupler / Outgoings ACB's shall have inbuilt microprocesor based

Over load protection (L), Short Circuit protection (S), Instantaneous Short Circuit

protection (I), Earth Fault protection (G), Shunt Trip releases. All ACB should have

Ics=Icu=Icw=50 KA for 1 sec, fully rated at 50 deg C ambient temperature & shall be

supplied with adopter terminal connection whose orientation can be changed at site.

All ACB shall be supplied with all standard accessories i.e. auxillary switch with 4NO

+ 4NC contacts, cradle, handle, safety shutter in confirmity with IS:60947

All incoming & outgoing MCCB's shall be microprocessor based with O/L & S/C and

E/F protection.

BILL OF QUANTITIES


Signature of EPIL

1 / 37

ELECTRICAL ESTIMATE



BILL OF QUANTITIES


All MCCB's shall be Ics = 100% Icu, with rotary handle & pad locking arrangement,

with adjustable O/L & S/C trip setting as per load requirement. All TP MCCB shall

be with heavy duty solid isolable neutral link.

The breaking capacity specified for all ACB's and MCCB's breakers is Ics value

(service rating).

The instrument chamber shall be separate and shall comprise of flush type

ammeter, voltmeter, selector switches, cast resin type CT's & PT's, etc. Separate

CT's shall be provided for protective and measuring system and for APFCR of

capacitor bank with suitable VA.

All Energy Analyser / TVM Shall have RS 485 Modbus RTU on board

Communication protocol for SCADA communication.

The fault withstanding capacity of panel & its control gear shall be min. 35 KA rms

for 1 sec.

GA drawings shall be got approved from Owners / Architects / Consultants

before fabrication.The panel has to be specifically fabricated as per the

space available at basement level. The existing column positions will also be

considered.

ACB Make and model :- ABB E-max, L&T-U Power Omega, Schneider - Master

Pact - NW, Siemens - 3WL, Legrand-DMX3

MCCB Make and model :- ABB - T-max, L&T - D sine, Schneider - Compact NS /

NSX, Siemens - 3VL, Legrand-DPX

INCOMERS from 1 Nos. 400 KVA Transformers

Signature of EPIL

2 / 37

ELECTRICAL ESTIMATE



BILL OF QUANTITIES


1 no. 630 AMP. Four Pole, Electrically operated 3 position motorized (220 V

AC) drawout type Air Circuit Breaker with all inbuilt protections, with

microprocessor based release, over current, earth fault, short circuit, Instantaneous

short circuit, closing coil (220 V AC), trip coil (24 V DC), shunt trip release with LCD

/ LED display for event history & measurement of current parameters, 35 KA

Breaking Capaciy with all standard accessories i.e. auxillary switch with 4NO + 4NC

contacts, cradle, handle, safety shutter in confirmity with IS:60947

ACB and Release Make / model :- ABB E-max (PR122), L&T-U Power Omega

(MTX 2.5G), Schneider - Master Pact -NW (Micrologic 6.0A), Siemens - 3WL

(ETU45B), Legrand - DMX3 (MP4-LSIG)

The ACB shall be electrically interlocked with the bus coupler, DG incomers and

other transformer incomers.

1 nos. 200 amp TP MCCB (35 KA) for Fire Fighting Pump Panel. (For one

transformer incomer only)

Protection releases / relays, Metering & Accessories for each Transformer

incomers

Over Voltage / Under Voltage relay / release with timer.

Backup earth fault relay.

Restricted earth fault relay.

Master trip relay.

Trip Circuit Supervison relay.

TNC switch.

Signature of EPIL

3 / 37

ELECTRICAL ESTIMATE



BILL OF QUANTITIES


Auto manual selector switch.

1 nos. 0-500 volt range digital type voltmeter with selector switch

1 set of 3 CT's of ratio 630/5A, Class 1.0 accuracy 15 VA burden for metering.

1 set of 3 CT's of ratio 630/5A, Class 1.0 accuracy 15 VA burden for APFCR.

1 set - 415 / √3 / 110 / √3 Class 1.0 accuracy 100 VA burden PT along with primary

and secondary fuse.

1 set of 4 CT's of ratio 630/1A, Class PS for protection.

1 no. CT's of ratio 630/5A, Class 5P20 for protection.

1 no. 0-630 Amp range digital type ammeter with selector switch.

Energy analyser (digital type) consisting of I, V, KW, KWH, KVA, PF, HZ, MDI (EM

6400 of Conzerve or equi.) with RS 485 communication port for communication /

report generation.

Power factor meter.

Frequency meter.

3 Nos. LED type phase indicating lamps, each lamp shall be with bakup MCB along

with hooter, auxillary relay, 2 sets of push buttons.

5 Nos. LED type indicating lamp for indicating the status of feeder - ON / OFF /

TRIP / Trip circuit healthy / DC supply healthy. Each lamp shall be with bakup MCB.

INCOMERS from 2 Nos. 125 KVA D G sets

Signature of EPIL

4 / 37

ELECTRICAL ESTIMATE



BILL OF QUANTITIES


2 nos. 400 AMP. Four Pole, Electrically operated motorized MCCB.


with microprocessor based adjustable O/L & S/C, E/F & reverse power relay with

trip setting as per load requirement. . The breaking capacity specified is Ics value.


ammeter, voltmeter, selector switches, CT's, PT's, etc

The MCCB shall be electrically interlocked with the bus coupler and Transformer

incomers.

BUS COUPLER

2 nos. 400 AMP. Four Pole, Electrically operated motorized MCCB.


with microprocessor based adjustable O/L & S/C, E/F & reverse power relay with

trip setting as per load requirement. . The breaking capacity specified is Ics value.



BUS BARS

1 sections of 630 AMP & 1 sections of 400 AMP, 415 Volts, 3 phase 50 HZ TPN

high conductivity electrolytic Aluminium bus bar of suitable length, SMC / DMC

supports, with colour coading and insulated by heat shrinkable sleeves and clip on

shrouds for joints. The current density of bus bar shall be minimum 1.00 sq mm /

amp.

Signature of EPIL

5 / 37

ELECTRICAL ESTIMATE



BILL OF QUANTITIES


The Maximum allowable temperature for the Bus bar to be restricted to 85 deg C.

The temperature rise should be restricted to 35 deg C above design ambient

temperature of 50 deg C.

CHANGE OVER SWITCH

1 nos. 200 Amp four pole On Load Change Over switch for Fire Pump feeder.

PLC for load management / automation

Design, manufacturing, testing at works, supply of PLC BASED , AUTOLOAD

TRANSFER, AUTOLOAD BALANCING PANEL FOR 2 nos.125 KVA D.G. sets

complete as required to acheive the desired functions. (Make : ALLEN BRADLEY /

SIEMENS / MITSUBISHI / ABB)

PLC shall be provided in main LT panel for interlocking between different incomers

and bus couplers to avoid unintentional paralleling of different supplies.

PLC is not envisazed for D G synchronization

In addition to required hardware and software following components shall also be

provided.

Based on the load requirement only required no. of DG sets shall be operated.

Monitoring of DG set safeties (mechanical as well as electrical).

PLC Hardware as required

Auxiliary relays/contactor/metering/protection etc as required

Signature of EPIL

6 / 37

ELECTRICAL ESTIMATE



BILL OF QUANTITIES


230 V AC, UPS of suitable rating

Annunciators as required

One no. Battery charger set consisting of Transformer / Rectifier, DC ammeter, DC

voltmeter, Charging rate selector switch, Off/Trickle/boost.

All control wiring from PLC to various feeders with min. of 2.5 sq mm copper FRLS

cable.

The PLC provided for Load Management & for interlocking of Breakers shall

perform to achieve the system as described in given Main Schemetic

Diagram.

OUTGOINGS -

All outgoing feeders shall be provided with one set of phase indication lamps and trip

indication lamps with protection fuses/MCB and ammeter with selector switch with

suitable ratio CT's of accuracy class 1.0

20 nos. outgoing feeders shall be provided with electronic dual reading KWHR

meter with RS 485 communication port, CT's with accuracy class 1, control circuits

and wiring as per SLD.

MCCB Make and model :- ABB - T-max, L&T - D sine, Schneider - Compact NS /

NSX, Siemens - 3VL, Legrand-DPX

5 nos. 200 AMPS TP MCCB. (35 KA)

9 nos. 100 AMPS TP MCCB. (35 KA)

6 nos. 63 AMPS TP MCCB. (35 KA) 1 Set 9,71,400 9,71,400

Signature of EPIL

7 / 37

ELECTRICAL ESTIMATE



BILL OF QUANTITIES


2AUTOMATIC POWER FACTOR CORRECTION PANEL (CAPACITOR

PANEL)

Supply , Installation, Testing commissioning, Design, manufacture, supply,

inspection, handling, assembling, affecting proper connections, testing and

commissioning of 14 SWG CRCA sheet steel fabricated cubical type 100 KVAR A

P F C Panel consisting of 5 / 10 / 15 / 20 / 25 / 50 KVAR capacitor units in tier

formation, housed in an integrated cubicle type automatic switching ON and OFF

control panel, floor mounting, dust & vermin proof, front operated construction,

enclosure class - IP 52, powder coated after proper treatment with 9 tank process

with top/bottom removable gland plates, as required, double compression type

cable glands, earth bus, hinged and lockable doors to achieve dust and vermin

proof complete with all inter connections small wiring by min. 2.5 sq. mm. copper

wires, ckt labels etc. The Aluminium Bus Bar shall be of suitable length, 500 volts, 3

phase 50 Hz TPN, electrolytic aluminium as per IS 8623 .

All outgoings MCCB's shall be thermal-magnetic based with inbuilt O/L & S/C

release.



be with heavy duty solid isolable neutral link. The breaking capacity specified is Ics

value. The instrument chamber shall be separate and shall comprise of flush type


Capacitor duty contactors should be used for switching individual capacitor banks.

The fault withstanding capacity of panel & its control gear shall be min. 35 KA rms

for 1 sec.

Signature of EPIL

8 / 37

ELECTRICAL ESTIMATE



BILL OF QUANTITIES


The capacitor panel shall be integrated with the main L T Panel as per schematic

diagram.

INCOMING

Incomer circuit breaker has been included in the main panel.

1 set- 3 CTs , ratio 200/5A Class 1.0 accuracy 15 VA burden for metering.

1Nos- (0-200A) digital Ameter with selector switch

Micro processor based automatic power factor control relay (including power

factor meter) in 8 steps for automatic cut off or add on capacitor units to keep the

power factor at 0.95 with variation of loads. All associated auxiliary contactors /

relays shall be provided with in the scope of work.

Phase indicating lamps with HRC fuses, and indicating in each capacitor chamber

unit to indicate On/Off status of capacitor unit.

BUS BARS

200 AMP, 500 Volts, 3 phase 50 HZ TPN high conductivity electrolytic Aluminium

bus bar of suitable length, SMC / DMC supports, with colour coding and insulated by

heat shrinkable sleeves and clips on shrouds for joints. The current density of bus

bar shall be minimum 1.00 sq mm / amp.


The temperature rise should be restricted to 35 deg C above ambient temperature.

OUTGOINGS -

Signature of EPIL

9 / 37

ELECTRICAL ESTIMATE



BILL OF QUANTITIES


2 nos. of 63 AMPS TPN 35 KA MCCB and 80 amps AC3 duty contactor with 25

KVAR gas filled 415 V capacitor bank, auto-manual selector switch, start stop push

button for manual operation including on/off indicating lamps and delay timer

complete.

1 no. of 63 AMPS TPN 35 KA MCCB and 80 amps AC3 duty contactor with 20



complete.




complete.




complete.




complete.

1 Set 63,779 63,779.00

3 L T Breaker (near Transformer)

Signature of EPIL

10 / 37

ELECTRICAL ESTIMATE



BILL OF QUANTITIES


Supply, testing and commissioning of 630 AMP. Four Pole, Manually

operated 3 position fixed type Air Circuit Breaker with all builtin protections, with

microprocessor based releases/relays, over current, earth fault, short circuit,

Instantaneous over current, closing coil (220 V AC), trip coil (24 V DC), 50 KA

Breaking Capaciy with all standard accessories i.e. auxillary switch, protection CT's

with 4NO + 4NC contacts, cradle, handle, safety shutter in confirmity with IS:13947-

2. The ACB will be provided with digital type ammeter with selector switch and CT's,

3 Nos. LED type phase indicating lamps, each lamp shall be with bakup HRC

fuse/MCB along with hooter, auxillary relay, 2 sets of push buttons, 4 Nos. LED type

indicating lamp for indicating the status of feeder - ON / OFF / TRIP due to over

current, TRIP due to earth fault. Each lamp shall be with bakup HRC fuse/MCB.

ACB and Release Make / model :- ABB E-max (PR121), L&T-U Power (MTX

1.0G), Schneider - Master Pact - MVS (Micrologic 6.0G), Siemens - 3WT

(ETU45B), Legrand - DMX3 (MP4-LSIG)

The ACB will be provised inside outdoor type enclosure of suitable size made out

of CRCA M.S. sheet 2 mm thick (14 SWG) with locking arrangement (IP-54),

powder coated after proper treatment with 9 tank process, duly fixed on MS angle

iron frame work of size 50mm x 50mm x 6mm, 90 cm long legs out of which 45 cm

duly grouted in cement concrete 1:2:4 (1 cement : 2 sand :4 stone aggrete 20mm),

The sheet steel shall undergo minimum 9 tank treatment followed by finishing

powder coating of min 60 micron thickness.

1 Sets 1,59,600.00 1,59,600.00

Signature of EPIL

11 / 37

ELECTRICAL ESTIMATE



BILL OF QUANTITIES


4 Design, manufacture, supply, testing and commissioning of Common

Services Panel - 01 / 02 / 03 / 04 fabricated out of 16 SWG CRCA sheet steel,

IP52, wall / floor mounting type. The sheet steel shall undergo minimum 9 tank

treatment followed by finishing powder coating of min 60 micron thickness. the

board includes 415 V electrolitic Aluminium Bus Bar, removable gland plates, cable

glands, including connection with outgoing feeders complete in all respect.

The incoming MCCB shall be thermal-magnetic based with inbuilt O/L & S/C

release with E/F protection and all Outgoings MCCB's shall be thermal-magnetic

based with inbuilt O/L & S/C release.



be with solid isolable neutral link. The breaking capacity specified is Ics value. All

outgoing MCB's shall be C type with 10 KA breaking capacity.

The above board shall be complete with 3 nos. phase indicating lights, flush

mounted Ammeter, Voltmeter, CT's, PT's, selector switches, protective fuses etc. at

Incomer with all inter connections by min. 2.5 sq.mm. Copper wires.





Signature of EPIL

12 / 37

ELECTRICAL ESTIMATE



BILL OF QUANTITIES




OUT GOINGS :

5 no 63 AMP FP MCB (10 KA)2 SET 75,545 1,51,090.00

5 Design, manufacture, supply, testing and commissioning of Common

Services Panel - 05 fabricated out of 16 SWG CRCA sheet steel, IP52, wall / floor

mounting type. The sheet steel shall undergo minimum 9 tank treatment followed by

finishing powder coating of min 60 micron thickness. the board includes 415 V

electrolitic Aluminium Bus Bar, removable gland plates, cable glands, including

connection with outgoing feeders complete in all respect.











Signature of EPIL

13 / 37

ELECTRICAL ESTIMATE



BILL OF QUANTITIES








OUT GOINGS :

3 no 40 AMP DP MCB (10KA)1 SET 26,334 26,334.00

6 Design, manufacture, supply, testing and commissioning of External

Lighting Panel - 01 / 02 / 03 fabricated out of 16 SWG CRCA sheet steel, IP52,

wall / floor mounting type. The sheet steel shall undergo minimum 9 tank treatment

followed by finishing powder coating of min 60 micron thickness. the board includes

415 V electrolitic Aluminium Bus Bar, removable gland plates, cable glands,

including connection with outgoing feeders complete in all respect.








Signature of EPIL

14 / 37

ELECTRICAL ESTIMATE



BILL OF QUANTITIES











OUT GOINGS :

10 no 63 AMP FP MCB (10 KA)

5 no 40 AMP DP MCB (10 KA)2 SET 88,135 1,76,270.00

Metering Panels

7 Design, manufacture, supply, testing and commissioning of Metering

Panels - 01 / 02 / 03 / 04 / 05 Main / Sub Distribution Board cum meter panel

fabricated out of 14 / 16 SWG CRCA sheet steel, IP52, wall / floor mounting type.

The sheet steel shall undergo minimum 9 tank treatment followed by finishing

powder coating of min 60 micron thickness. the board includes 415 V electrolitic

Aluminium Bus Bar, removable gland plates, cable glands, including connection with

outgoing feeders complete in all respect.

Signature of EPIL

15 / 37

ELECTRICAL ESTIMATE



BILL OF QUANTITIES


The Distribution board shall have space suitable for housing 1 phase / 3 phase

electronic type KWHR meters and MCB's as required consisting of compartments

of suitable sizes each of 16 SWG MS sheet steel fabricated, dust & vermin proof

with hinged and lockable doors for following meters.(KWHR meters shall be

supplied by the local electric supply authority / under seperate item)

For 4 nos. 3 phase KWHR meters











Various Metering Panel Shown Below

a) Type - A


Signature of EPIL

16 / 37

ELECTRICAL ESTIMATE



BILL OF QUANTITIES







OUT GOINGS :

5 nos 63 AMP FP MCB (10 KA)2 SET 34,473 68,946

b) Type - B







OUT GOINGS :

3 nos 40 AMP FP MCB (10 KA)1 SET 26,334 26,334

Electronic Energy Meters and Revenue Collection System

Signature of EPIL

17 / 37

ELECTRICAL ESTIMATE



BILL OF QUANTITIES


8 Supply, installation, testing and commissioning of 3 phase, 4 wire, 50 Hz, dual

register, pre paid type electronic energy meters (As per IS : 15884 - 2010) and

revenue collection system with key pad technology along with home display /

freedom units having LCD display, lithium battery with inbuilt facility of tripping and

resetting of over loading in case of D G power at preset level, provision of change of

tarrif as per customer's requirements and as per manufacturers specifications. The

Meter should have inbuild disconnect switches as per BIS requirement with over load

and low balance alarm facility. The cost will also include common meter reading

instrument. The meter should be capable for full or partial backup,. For freedom

units the 3 pair flat telephone cable shall run from meter to each unit.

The system will include Supply, installation, testing and commissioning of DG

sensing switch mode power supply unit with discrimination receivers for sensing of

DG (SMPS and necessary lengths of PVC insulated armoured copper conductor

2x2.5 sq mm control wiring for DG power registration in electronic meters. The

control wiring shall run between D G panel to each block seperately. The control

wiring shall be connected to each meter. OR, Supply, installation, testing and

commissioning of mains sensing power line carrier based source discrimination

receivers of sensing of mains of suitable MVA rating. (LINE INJECTOR)

The system will include necessary vending software and data base designing, one

set of Intel Core 2 Duo level or higher PC with 1 GB RAM and 500 GB HDD of

HP/Dell/Samsung make with laser printer and token printer with serial port, UPS of

500 VA with 20 minute back up complete in all respects for full functioning of system

and ready for collection of revenues. The charges will include for necessary training

of vending system to operator and customers. (Meter & system Make : Secure-

Liberty) .

6 sets 13,965.00 83,790.00

Signature of EPIL

18 / 37

ELECTRICAL ESTIMATE



BILL OF QUANTITIES


TOTAL 17,27,543.00

8 Laying and testing of aluminium conductor cable PVC / XLPE insulated armoured,

served, sheathed 1100 volts grade. On surface the cable run shall be fixed by GI

clamps etc. of suitable size or on existing cable tray or inside pipe complete in all

respect .The armouring of the cable shall be properly connected with the earth

conductor including fixing of palm or pin type copper tin plated cable socket (lug) /

end terminations to the cable leads, insulating with tape and making connections

with brass / nickle plated double cmpression gland, providing cable tags complete in

all respect including supply of clamps, lugs, tape, tags and compression glands etc

complete upto the satisfaction of BSF. (The supply of terminations and glands shall

be under seperate item)

16 sqmm 4 core 50 M 33.20 1,660.00

240 sqmm 3 1/2 core 60 M 99.70 5,982.00

300 sqmm 3 1/2 core 60 M 99.70 5,982.00

9 Laying and testing of aluminium conductor cable PVC / XLPE insulated armoured,

served, sheathed 1100 volts grade at 750 mm below ground level over a cushion

of 75 mm thick fine river sand alround & protected with brick on sides & top including

excavation & back filling. The armouring of the cable shall be properly connected

with the earth conductor including fixing of palm or pin type copper tin plated cable

socket (lug) / end terminations to the cable leads, insulating with tape and making

connections with brass / nickle plated compression gland, providing cable tags

complete in all respect including supply of sand, bricks, clamps, lugs, tape, tags and

compression glands etc complete upto the satisfaction of BSF.(The supply of

terminations and glands shall be under seperate item)

CABLES

Signature of EPIL

19 / 37

ELECTRICAL ESTIMATE



BILL OF QUANTITIES


10 sqmm 4 core 60 M 79.80 4,788.00

16 sqmm 4 core 4,100 M 99.70 4,08,770.00

25 sqmm 4 core 150 M 99.70 14,955.00

70 sqmm 4 core 130 M 133.00 17,290.00

35 sqmm 3 1/2 core 60 M 99.70 5,982.00

50 sqmm 3 1/2 core 80 M 106.00 8,480.00

70 sqmm 3 1/2 core 70 M 119.00 8,330.00

95 sqmm 3 1/2 core 800 M 133.00 1,06,400.00

120 sqmm 3 1/2 core 1,600 M 159.00 2,54,400.00

150 sqmm 3 1/2 core 70 M 159.00 11,130.00

185 sqmm 3 1/2 core 70 M 172.00 12,040.00

240 sqmm 3 1/2 core 600 M 199.00 1,19,400.00

300 sqmm 3 1/2 core 1,600 M 199.00 3,18,400.00

TOTAL 9,390 13,03,989.00

10

Supply fixing of plam or pin type copper tin plated cable socket (lug) to the

cable leads, insulating with tape and making connections etc. complete in all

respects as per direction of BSF.

504 10 sq.mm.20 NOS 15.00 300.00

504 16 sq.mm.170 NOS 18.60 3,162.00

504 25 sq.mm.8 NOS 26.60 212.80

504 35 sq.mm.15 NOS 29.20 438.00

504 50 sq.mm.5 NOS 54.50 272.50

Signature of EPIL

20 / 37

ELECTRICAL ESTIMATE



BILL OF QUANTITIES


504 70 sq.mm.11 NOS 81.00 891.00

504 95 sq.mm.14 NOS 113.00 1,582.00

504 120 sq.mm.30 NOS 148.00 4,440.00

504 150 sq.mm.45 NOS 192.00 8,640.00

504 185 sq.mm.13 NOS 260.60 3,387.80

504 240 sq.mm.40 NOS 372.00 14,880.00

504 300 sq.mm.135 NOS 545.00 73,575.00

11 Supply and fixing brass nickle plated compression glands for PVC insulated

armoured, served, sheathed cable including rubber ring etc. complete in all

respect. The armouring of the cable shall be properly connected with the earth

conductor.

50316 sqmm 4 core

30 NOS 83.00 2,490.00

50325 sqmm 4 core

5 NOS 94.00 470.00

50370 sqmm 4 core

5 NOS 167.00 835.00

50335 sqmm 3 1/2 core

5 NOS 129.00 645.00

50350 sqmm 3 1/2 core

5 NOS 139.00 695.00

50370 sqmm 3 1/2 core

5 NOS 139.00 695.00

50395 sqmm 3 1/2 core

5 NOS 167.00 835.00

503120 sqmm 3 1/2 core

5 NOS 167.00 835.00

503150 sqmm 3 1/2 core

10 NOS 210.00 2,100.00

503185 sqmm 3 1/2 core

5 NOS 260.00 1,300.00

503240 sqmm 3 1/2 core

13 NOS 305.00 3,965.00

503300 sqmm 3 1/2 core

40 NOS 399.00 15,960.00

Signature of EPIL

21 / 37

ELECTRICAL ESTIMATE



BILL OF QUANTITIES


TOTAL 1,42,606.10

12 Supply of 3 core stranded aluminium conductor 11 KV grade XLPE (E) (Cross

linked Polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured

cable confirming to IS : 7098 (part II with latest amendments)

240 sq. mm 3 core 135 M 1,715.00 2,31,525.00

13 Laying and testing of 3 core stranded aluminium conductor XLPE insulated

armoured cable 11 KV grade, at a depth of 900 mm below ground level over a

cushion of 100 mm thick fine river sand alround and protected with well burnt bricks

on sides and on top put across or on surface fixed on GI clamps or on cable trey or

inside pipe etc as required including the supply of sand, bricks and clamps etc. The

armouring of the cable shall be properly connected with earth conductor by clamps

etc.

240 sq. mm 3 core 170 M 212.00 36,040.00

14 Supply and making heat shrinkable type Indoor end termination Kit of 11 KV

XLPE cable.

240 sq. mm 3 core 2 Set 13,699.00 27,398.00

15 Supply and making heat shrinkable type Outdoor end termination Kit of 11 KV

XLPE cable.

240 sq. mm 3 core 2 Set 20,216.00 40,432.00

CABLE TRAY

Signature of EPIL

22 / 37

ELECTRICAL ESTIMATE



BILL OF QUANTITIES


16 Supply and erection of Perforated type cable trays made out of prefabricated

Galvanized sheet steel including tees, bends, crossings, reducers, couplings to be

laid in cable trenches, over head on wall or hanged from ceiling including all

neccessary supports, brackets, grouting, levelling, suspention and fixing

arrangements, dash fastners, G.I. nuts & bolts complete in all respects.

750 mm (W) X 50 mm (H) X 2 mm (T)

30 M 1,995.00 59,850.00

600 mm (W) X 50 mm (H) X 2 mm (T) (Verticle run in shaft)

70 M 1,662.00 1,16,340.00

450 mm (W) X 50 mm (H) X 2 mm (T) 30 M 1,330.00 39,900.00

300 mm (W) X 35 mm (H) X 1.5 mm (T)

70 M 997.00 69,790.00

150 mm (W) X 35 mm (H) X 1.5 mm (T) (for LV services)

70 M 731.00 51,170.00

TOTAL 6,72,445.00

MISCELLANEOUS ITEMS

17 Providing and fixing M.V. danger notice plate of 200 mm x 150 mm made of mild

steel, 2 mm thick and vitreous enamelled painting white on both sides, and with

inscription in single red colour on front side as required .

2 NOS 425.00 850.00

18 Providing and fixing H.V. danger notice plate of 250 mm x 200 mm made of mild

steel, 2 mm thick and vitreous enamelled painting white on both sides, and with

inscription in single red colour on front side as required .

2 NOS 598.00 1,196.00

Signature of EPIL

23 / 37

ELECTRICAL ESTIMATE



BILL OF QUANTITIES


19 S/F of shock treatment chart (prescribed under I.E.rules) duly framed with glass

and supported from back with hard board with supply of all material labour T & P etc

for proper completion of work. (Approx front area = 1.20 sq M)

2 NOS 984.00 1,968.00

20 Supply and fixing of First aid box as approved by Indian red cross conforming to IS

: 2217.2 NOS 997.00 1,994.00

21 Supply of rubber gloves of 11 KV grade as per IS : 4770.

2 Set 532.00 1,064.00

22 Supply, laying, jointing, testing and commissioning of ISI marked (IS : 14930, part

2) H.D.P.E. (DWC) Double wall Corrugated pipe for cable laying having

corrugation on outer wall and plain smooth surface at inner side including

transportation upto the site, jointing, providing and fixing all fittings i.e. sockets,

couplers, reducers, end caps etc including excavation in all kind of soil upto 1 meter

depth of suitable width with back filling of soil into trenches to complete the works in

all respects.

104 mm. ID / 120 mm OD 170 M 352.00 59,840.00

23 Supply and fixing of cable route maker

4 NOS 399.00 1,596.00

24 Supplying and laying of 1000 mm wide x 12 mm thick chequered rubber matting of

tested quality to withstand 15KV dielectric strength as per IS 5424 complete in all

respects.

13 M 2,048.00 26,624.00

25 Supplying, Fixing, Testing, Commissioning of 1800 mm x 900 mm x 20 mm thick

chequered rubber matting of tested quality to withstand 11 KV dielectric strength

complete in all respects.4 NOS 4,216.00 16,864.00

TOTAL 1,11,996.00

Signature of EPIL

24 / 37

ELECTRICAL ESTIMATE



BILL OF QUANTITIES


G.I. EARTHING

26

Supply & burrying of 600mm x 600mm x 6.0mm G.I. plate, vertically for earthing

with its top at least 3 meters below ground level complete with 20 mm G.I. pipe for

watering funnel, 300 mm square C.I. frame with hinged cover, masonry housing,

alternate layers of coke and salt at least 150 mm thick alround including excavation

and back filling etc. complete in all respects.

13 NOS 6,556.00 85,228.00

27 Providing & fixing 20mm x 3mm G.I. strip on surface, in recess or in ground

including connections etc. as required . 135 M 66.50 8,977.50


including connections etc. as required.(Common Services & Nornal Metering

Panels )135 M 109.00 14,715.00


including connections etc. as required (Pig tail Transformers, DG sets, LT panels).

35 M 176.00 6,160.00


including connections etc. as required (equipment earth grid).

30 M 239.00 7,170.00

31 Providing & fixing 50mm x 10 mm G.I. strip on surface, in recess or in ground

including connections etc. as required.(Main earth Grid & Intrconnecting earth loop)

30 M 372.00 11,160.00

COPPER EARTHING

Signature of EPIL

25 / 37

ELECTRICAL ESTIMATE



BILL OF QUANTITIES


32

Supply & burrying of 600mm x 600mm x 6 mm copper plate, vertically for

earthing with its top at least 3 meters below ground level complete with 20 mm G.I.

pipe for watering funnel, 300 mm square C.I. frame with hinged cover, masonry

housing, alternate layers of coke and salt at least 150 mm thick alround including

excavation and back filling etc. complete in all respects.

3 NOS 13,433.00 40,299.00

Providing & fixing 32mm x 6mm insulated Copper strip on surface, in recess or in

ground including connections etc. as required.

40 M 811.00 32,440.00

ADVANCE LIGHTNING PROTECTION

33 Providing, fixing, testing and commissioning of High pulsar voltage OPR 60 Early

streamer emmission (ESE) Advance Lightning Protection system with 5 meter

high Pulsar 60 having 97 meter protection radius complies with NFC-17-102

standards. The Air terminal should be capable to collect the ambient electric field

and to should emit the upward streamer with the defined Gain in time. The

installation should be strictly followed as per manufacturers instructions. The system

should include the following items complete in all respects.

GI pipe fabrication support structure providing with suitable base plate, should have

provision for Guy wire clamping system, termination arrangement for the Down-

Conductor

GI pipe fabrication support structure providing with suitable base plate, should have

provision for Guy wire clamping system, termination arrangement for the Down-

Conductor

2 sets of 25 x 3 mm copper strip or 2 sets of 25 x 5 mm G. I. stripdown conductor

of suitable length as per building height with suitable mounting accessorries. The

mounting clamps should be conductive material.

Signature of EPIL

26 / 37

ELECTRICAL ESTIMATE



BILL OF QUANTITIES


2 sets of maintenance free Earth enhancing Chemical compound type safe earthing

with copper bonded steel rod with minimum 1.80 mts long and suitable termination

clamps.

1 Job 3,45,800.00 3,45,800.00

TOTAL 5,51,949.50

11 KV Compact Switch gear (RMU) Main near Two Pole strusture)

34 Providing, Fixing, testing and Commissioning of 11 KV, 630 amp, 18.4 KA Indoor

compact switchgear as per following details -

(a) Supply of 3 Way 11kV , 3Phase, 50Hz, 3 wire , earthed neutral, outdoor type floor

mounted, non extensible, having hinged arc proof cable doors, breaking capacity

18.4 kA, SF6 / VCB Ring Main Unit enclosed in robotically laser welded stainless

steel tank having IP67 degree of protection consisting of following:-

(i) 3 Nos. 630Amps tee off spring assisted type vacuum/SF6 circuit breaker unit

with self powered series trip microprocessor based numerical over current and

Earth fault relay for protection, fitted with fixed type voltage indicator device as per

IEC 61958 and ring core type protection Current transformer along with LV

compartment with Ammeter with selector switches.

1 SET 7,98,000.00 7,98,000.00

35 TRANSFORMER (11 KV / 0.4 KV) (400 KVA)

Signature of EPIL

27 / 37

ELECTRICAL ESTIMATE



BILL OF QUANTITIES


Supply, storing, inspection, handling, assembling, installing in correct aligned position

effecting proper connections, testing & commissioning of Outdoor mounted type

11 KV / 433 Volt Transfomer (as per ECBC norms & as per IS : 2026, P1 to P5),

3 phase, 4.5% impedance , Dyn 11 vector group, 50 cycles, (ONAN) oil immersed

naturally cooled, step down, copper wound, continuous duty, temperature rise

above 50oC in oil by thermometer 45

oC, in winding by resistance 50

oC and other

standard accessories as required including followings :

a) Cable Termination box with disconnecting facility for 11 KV 3C-240 sq mm XLPE

cable at 11 KV side

b) Cable Termination box with disconnecting facility for required nos. LT cable at LT

side.

c) Off Load Tap Changer on HV side + 7.5 % to - 7.5 % @ 2.5 % in manual mode

with position indicator and locking arrangements.

d) Unidirectional rollers.

e) Oil Conservator with filter cap, drain plug & oil level gauge

f) Earthing terminals 2 nos for body earthing.

g) 0.415 KV neutral seperately bought out on a bushing for neutral earthing.

h) Pressure release device. Double diaphragm explosion vent.

i) Radiators Detachable type with top & bottom shut off valve.

j) First filling of filtered dehydrated oil as per IS : 335 including make up fill during

installation.

Signature of EPIL

28 / 37

ELECTRICAL ESTIMATE



BILL OF QUANTITIES


k) Silica gel breather with connecting pipe & oil seal.

l) Rating, Diagram & Terminal marking plate of SS.

m) Sampling Valves for filteration, drainage and filling with plugs.

n) Air release plugs.

o) Thermometer pocket with plug.

p) Lifting Lugs.

q) Buchholz relay with gas release cock, alarm & shut off valve with separate set of

contacts for trip and alarm.

r) 150 mm Winding temperature indicator (WTI) with alarm.

s) 150 mm Oil temperature indicator (OTI) with alarm

t) Marshalling Box.

u) Clamping device.

v) Jacking Pads.

The work shall be complete in all respects up to the satisfaction of BSF.

400 KVA 1 set 8,29,920.00 8,29,920.00

TOTAL 8,29,920.00

DIESEL GENERATING SET

Signature of EPIL

29 / 37

ELECTRICAL ESTIMATE



BILL OF QUANTITIES


36 Supply, Fixing, testing and Commissioning of Silent type Diesel Generating Set at

0.8 PF, 415 Volts, 50 cycles per second, 1500 rpm, 3 phase, suitable for parallel

operation / PLC based load management, 0.85 load factor including sound proof

acoustic and weather proof enclosure, residential type silencer (as per CPCB

norms) fabricated out of CRCA sheet of 14 / 16 SWG thickness with min. 9 tank

pretreated before powder coating with ventillation system complete in all respects

comprising of the following.(Testing of DG sets should be done as per specified at

Technical specification).

Diesel Engine -

Diesel Engine suitable for driving alternator of above rating, compression ignition, 4

stroke cycle, Radiator cooled, turbo charged, battery starting, 1500 RPM, suitable

for above output of alternator at 40oC, 50% RH & at 1000 M MSL and confirming to

BS 5514, BS 649, IS 10000, capable of taking 10% overloading for one hour after

12 hrs of continuous loading, complete with all the accessories i.e. tachometer with

hour meter, flexible coupling with guard, crank case of steel, crank shaft, conncting

rods, electronic governing system, dynamically balanced flywheel, air intake

manifold, Air cleaner, anti vibration pads, starter motor, including all other

accessories required to complete the system.

Instrument Panel - Engine mounted Instrument Panel fitted with and having digital

display for followings :

Start stop switch with key

Water temperature indication

Lubrication oil pressure indication.

Signature of EPIL

30 / 37

ELECTRICAL ESTIMATE



BILL OF QUANTITIES


Lubrication oil temperature indication.

Battery charging indication

RPM indication

Over speed indication

Low Lube oil trip indication

Engine hours indication

Alternator -

Synchronous Alternator of above capacity at 0.8 PF, 3 phase, 415 volts, 50 cycles,

4 wire, 1500 RPM, suitable for operation at 40 deg C, 50% RH & at 1000 meter

above MSL, capable of taking 10% overlioading for one hour after 12 hrs of

continuous loading, brushless, self excited, self regulated through AVR, continuous

duty confirming to IS 4722, BS 2613 suitable for tropical conditions, class H

insulation, including terminal box suitable for cable termination as required.

Base Frame - Both the engine and alternator shall be mounted on suitable base

frame made of MS channel which shall be installed on cement concrete foundation

and vibration isolating arrangement as per recommendations of manufacturer.

Inbuilt Fuel tank of standard capacity complete with inlet and outlet connections, oil

indication gauge, drain plug, air breather, fuel transfer system for automatic fuel

refilling system with pump, piping, valves, level indicators etc. complete.

Signature of EPIL

31 / 37

ELECTRICAL ESTIMATE



BILL OF QUANTITIES


Exhaust System - Exhaust manifold with silencer complete with mineral wool / rock

wool insulation of minimum 50 mm thick of 150 Kg per cu M density on all sides,

with chicken mesh wrapping and 26 SWG aluminium sheet cladding complete as

required.

The D G set should be supplied with required hardware for external PLC based auto

load management system.

Starting system - 24 Volt DC starting system comprising of starter motors :

voltage regulator and arrangement for initial excitation complete with 12/24 Volts

suitable nos. lead acid type batteries of suitable AH.

Ventillation System - Arrangement for fresh air intake for cooling of the engine &

alternator, extraction, discharging hot air into the atmosphere as per standard

specifications.

125 KVA 2 SET 12,00,000 24,00,000.00

37 Supply, Fixing, testing and Commissioning of Exhaust gas piping system of Class

`B' MS pipe for upto 150 mm dia and for 200 mm dia & above MS pipe as per

IS:3589 with welded joints, cut to required lengths with necessary bends, fittings,

expansion joints of suitable diameter including providing hot dip galvanized

supporting / clamping arrangements at suitable intervals, anti vibration mounting,

with mineral wool / rock wool insulation of 50 mm thick of 150 Kg per cu M density

on all sides of exhaust pipe, with chicken mesh wrapping and 26 SWG aluminium

sheet cladding complete as required. The aluminum foil should be tightly cladded to

insulation surface of pipe. The aluminum cladding shall be lock with sheet metal

screws with other sections of aluminium foil. The measurement shall be done

longitudnally with any extra allownce for bends beyond centre line of bend. (Stack

height should be in accordance with emission regulations of CPCB, which will go

well above the top most terrace)

Signature of EPIL

32 / 37

ELECTRICAL ESTIMATE



BILL OF QUANTITIES


200 mm dia (wall thickness - 5.0 mm) 10 M 4,655.00 46,550.00

100 mm dia (wall thickness - 4.5 mm) 10 M 2,128.00 21,280.00

TOTAL 24,67,830.00

39 Supply of Octagonal Poles of 10 M height with 200 mm / 175 mm bottom A/F &

70 mm top A/F (across face) made up of 3mm thick HT sheet along with

galvanized base plate of size 290x290x16mm / 275x275x16mm suitable to

withstand max wind speed of 169 KM/hr and suitable for mounting decorative

double / single arm bracket with street lights. The internal and external surface of

poles shall be hot dip galvanized to 70 micron DFT. The pole will have a weather

proof camouflaged junction box at 500 mm ht. with flush cover for cable termination

block & earth stud with washer & nuts etc i/c provision for supporting cable of size up

to 2 Nos. of 4c x 35 sqmm i/c Supply of 4 nos. M24 X 750 mm long 'J' type EN 8

grade foundation bolts with nuts and washers, 63 Amp terminal block suitable for up

to 4 c x 35 Sq.mm Aluminium conductor cable. The Pole should be complete with all

required accessories to complete the work as directed by Engg-in-charge. (Make :

Bajaj / Schreder / Philips)

3 set 28,196.00 84,588.00

EXTERNAL LIGHTING SYSTEM

Signature of EPIL

33 / 37

ELECTRICAL ESTIMATE



BILL OF QUANTITIES


48 Erection of 6 meter high street light pole with single / double arm brackets with

luminaires including providing and casting in position 'M20' grade reinforced cement

concrete pole foundation of size 550mm (L) X 550mm (W) and 1200 mm (D) i/c

excavation of earth in all kind of soils including providing, cutting, bending and

placing in position, reinforcement of cold twisted main vertical bars of 12mm dia - 8

nos. and reinforcement ring of cold twisted bar of 8mm dia - with 190mm spacing,

i/c fixing of J bolts, terminal block, MCB's etc i/c providing & placing 63 / 75mm

(I.D.) DWC, HPDE Pipe of suitable length for cable entry & exit as required to

complete the work as per the satisfaction of Engg-in-Charge.

108 job 9,975.00 10,77,300.00

49 Supplying, drawing, connecting and testing of following size of PVC insulated FRLS

copper conductor (as per IS : 694) flexible multicore wire in the existing poles and

bracket from cable termination connector / MCB to the fitting i/c providing suitable

copper lugs connections etc. as reqd.

3 core 2.5 sq.mm (for 10 Mtr Poles) 5 job 1,330.00 6,650.00



3 core 2.5 sq.mm (for 7 Mtr Poles) 3 job 931.00 2,793.00

3 core 2.5 sq.mm (for 6 Mtr Poles) 3 job 798.00 2,394.00

SUPPLY OF EXTERNAL LIGHTING SYSTEM

Signature of EPIL

34 / 37

ELECTRICAL ESTIMATE



BILL OF QUANTITIES


Supply of factory wired HPSV street light luminaire with pressure die cast

aluminium housing, POT optics reflector, heat resistant toughened glass cover,

protection class as per model, complete with integral control gear box including

SON-T lamp, ballast, capacitor etc complete in all respects as per the standard

catalogue item.

1X150 watt HPSV (Philips - SGP 401 / SON -T 150) Esplanade IP-65 108 Nos 5490.00 5,92,920.00

Supply of factory wired Metal Halide / CDM-T street light luminaire with pressure

die cast aluminium housing, POT optics reflector, heat resistant toughened glass

cover, protection class as per model, complete with integral control gear box

including MH / CDM-T lamp, ballast, capacitor etc complete in all respects as per

the standard catalogue item.

1X250 watt MH (Philips - SGP 338/HPI-T 250) Velocity IP-66 3 Nos 18,633.00 55,899.00

53 Installation, testing and commissioning of CFL / HPSV / MH / CDMT type post top

lantern with required lamps complete with, control gears, ballast, capacitor etc.

including connection with 3x1.5 sqmm flexible fire retardant copper connecting wire

of required length complete as required.

- Nos 532.00 -

54 Installation, testing and commissioning of HPSV type street light fixture on steel

pole with required lamps, control gear box, ballast, capacitor, including connection

with 3x2.5 sqmm flexible fire retardant copper connecting wire of required length


108 Nos 931.00 1,00,548.00

51

52

ERECTION OF EXTERNAL LIGHTING FIXTURES

Signature of EPIL

35 / 37

ELECTRICAL ESTIMATE



BILL OF QUANTITIES


55 Installation, testing and commissioning of Metal Halide / CDMT type street light

fixture on steel pole with required lamps, control gear box, ballast, capacitor,

including connection with 3x2.5 sqmm flexible fire retardant copper connecting wire

of required length complete as required.

3 Nos 931.00 2,793.00

S/F of GI pipe (Class `B' - IS:1239) pole suitable for fixing of post top lantern

including IP 65, thermo plastic / 1.6 mmm tk Galvanized sheet steel cable junction

box of suitable size with terminals, knock outs for cable entry, glands etc complete

including Masonry work in cement concrete (1:2:4) for erecting the pole and ISI

marked 3x1.5 sqmm flexible fire retardant (FRLS) copper wire from cable box to

lamp for connections including two coat painting of the pole by an approved shade of

enamel paint on primer coat and necessary reducers & nipple on the top of pole for

fixing of post top lantern including supply & fixing of 63 mm dia PVC pipe of required

length & size for underground cable entry and exit upto the junction box, base plate

etc. The work shall be complete as required up to the satisfaction of Engg-in-charge.

50 mm dia. 3.2 m long

(2.4 m aboveground and 0.8 m below ground)18 Nos 4,655.00 83,790.00


(2.4 m aboveground and 0.8 m below ground)13 Nos 5,320.00 69,160.00


(3 m aboveground and 1 m below ground)18 Nos 5,985.00 1,07,730.00


(3.5 m aboveground and 1 m below ground)18 Nos 6,982.00 1,25,676.00

56

Signature of EPIL

36 / 37

ELECTRICAL ESTIMATE



BILL OF QUANTITIES


TOTAL 24,11,193

GRAND TOTAL 102,19,472

Signature of EPIL

37 / 37

ELECTRICAL ESTIMATE



I CIVIL WORKS 1361928.75 18680.00

II INTERNAL PLUMBING WORK 198469.15 33878.92

III INTERNAL ELECTRICAL WORK 315252.90 87268.56

TOTAL 1875650.80 139827.48



ELECTRICAL SUB-STATION BUILDING

SUMMARY OF COST

Signature of EPIL

1 / 1

ESS BUILDING SUMMARY


DSR 2012 NON-DSR

I EARTH WORK 31186.75

II CONCRETE WORK 62864.20


IV BRICK WORK 376535.70

V WOOD WORK 32661.25

VI STEEL WORK 52348.65

VII FLOORING 125129.45

VIII ROOFING 3271.50

IX FINISHING 103020.75

X ROADS 14586.00

XI NON SCHEDULE ITEMS 18680.00

TOTAL 1361928.75 18680.00

Proposed construction of external development & bulk services (civil & electrical works) for ITBP

at Kalikiri, Chittoor (A.P)

SUMMARY OF COST


CIVIL WORK


Signature of EPIL

1 / 1

ESS CIVIL SUMMARY


I

1 2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in

foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including

dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the

excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

2.8.1 All kinds of soil. Cu.M 70.00 70.00 130.80 9156.00

2 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations

etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming

and watering, lead up to 50 m and lift upto 1.5 m.

Cu.M 140.00 140.00 83.80 11732.00

2.27 Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming,

consolidating and dressing complete.

Cu.M 10.00 10.00 749.30 7493.00

2.28 Surface dressing of the ground including removing vegetation and in-equalities not

exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m.2.28.1 All kinds of soil. 100 Sq.M 3.00 3.00 935.25 2805.75

[TOTAL I] 31186.75

II

3 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level :4.1.8 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). Cu.M 13.00 13.00 3593.30 46712.90

4.2 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness)

including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses,

string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills,

fillets, sunken floor,etc., up to floor five level, excluding the cost of centering, shuttering

and finishing :4.2.3 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Cu.M 1.00 1.00 5272.40 5272.40

4.2.5 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). Cu.M 1.00 1.00 4781.40 4781.40

QTYAMOUNT

(in Rs)

EARTH WORK 2.0

CONCRETE WORK 4.0

BILL OF QUANTITIES

ELECTRICAL SUB STATION

S

NoDSR -2012 DESCRIPTION

ELECTRI

CAL SUB UNIT

RATE

(in Rs)

Signature of EPIL

1 / 9

ESS CIVIL BOQ


QTYAMOUNT

(in Rs)

S


ELECTRI

CAL SUB UNIT

RATE

(in Rs)

4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6

graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40

mm nominal size, well rammed and consolidated and grouted with fine sand including

finishing the top smooth

Sq.M 18.00 18.00 338.75 6097.50

[TOTAL II] 62864.20

III

5 5.9 Centering and shuttering including strutting, propping etc. and removal of form for :

(a) 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete. Sq.M 18.00 18.00 166.90 3004.20

(b) 5.9.3 Suspended floors, roofs, landings, balconies and access platform. Sq.M 50.00 50.00 311.20 15560.00

(c) 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. Sq.M 100.00 100.00 262.25 26225.00

(d) 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts. Sq.M 50.00 50.00 365.60 18280.00

5.9.15 Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string

courses, bands, copings, bed plates, anchor blocks and the like.

Sq.M 4.00 4.00 166.90 667.60

5.9.16 Edges of slabs and breaks in floors and walls.

5.9.16.1 Under 20 cm wide R.M. 35.00 35.00 99.45 3480.75

5.9.19 Weather shade, Chajjas, corbels etc., including edges. Sq.M 6.00 6.00 411.10 2466.60

5.11 Extra for additional height in centering, shuttering where ever required with adequate

bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a

height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be

measured)5.11.1 Suspended floors, roofs, landing, beams and balconies (Plan area to be measured). Sq.M 135.00 135.00 121.65 16422.75

6 5.22 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in

position and binding all complete upto plinth level.5.22.6 Thermo-Mechanically Treated bars. Kg 1500.00 1500.00 62.25 93375.00

7 5.22A Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in

position and binding all complete above plinth level.5.22A.6 Thermo-Mechanically Treated bars. Kg 2800.00 2800.00 62.25 174300.00

8 5.30 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. R.M. 8.00 8.00 22.25 178.00

REINFORCED CEMENT CONCRETE 5.0

Signature of EPIL

2 / 9

ESS CIVIL BOQ


QTYAMOUNT

(in Rs)

S


ELECTRI

CAL SUB UNIT

RATE

(in Rs)

9 5.33 Providing and laying in position machine batched and machine mixed design mix M-25

grade cement concrete for reinforced cement concrete work, using cement content as per

approved design mix, including pumping of concrete to site of laying but excluding the cost

of centering, shuttering, finishing and reinforcement, including admixtures in recommended

proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability

without impairing strength and durability as per direction of Engineer-in-charge.

(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used

as per design mix is payable/recoverable separately).(a) 5.33.1 All works upto plinth level. Cu.M 14.00 14.00 5242.15 73390.10

(b) 5.33.2 All works above plinth level upto floor V level. Cu.M 23.00 23.00 5781.50 132974.50

TOTAL [III] 560324.50

IV

10 6.34 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in

foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) Cu.M 33.00 33.00 6006.20 198204.60

11 6.34 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) Cu.M 18.00 18.00 6006.20 108111.60

12 6.34 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation

7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) Sq.M. 130.00 130.00 476.85 61990.50

13 6.15 Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course

of half brick masonry.

Sq.M. 130.00 130.00 63.30 8229.00

TOTAL [IV] 376535.70

V

9.21 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-

decorative type, core of block board construction with frame of 1st class hard wood and well

matched commercial 3 ply venerring with vertical grains or cross bands and face veneers on

both faces of shutters:9.21.1-9.15.1 35 mm thick without using ISI marked Stainless Steel butt hinges. Sq.M 3.00 3.00 1533.65 4600.95

Rate = 1578.30-44.65 = 1533.65

BRICK WORK 6.0

WOOD WORK 9.0

Signature of EPIL

3 / 9

ESS CIVIL BOQ


QTYAMOUNT

(in Rs)

S


ELECTRI

CAL SUB UNIT

RATE

(in Rs)

14 9.48 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats,

square or round bars etc. including priming coat with approved steel primer all complete

9.48.1 Fixed to steel windows by welding. Kg 230.00 230.00 90.75 20872.50

9.56 Providing and fixing ISI marked, IS : 1341, M.S. heavy weight butt hinges with necessary

screws etc. complete :9.56.2 100x75x3.50 mm Each 13.00 13.00 30.70 399.10

9.63 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with

necessary screws etc. complete :9.63.3 150x10 mm Each 3.00 3.00 35.80 107.40

9.64 Providing and fixing ISI marked 85x42mm oxidised M.S. pull bolt lock conforming to IS :

7534 with necessary screws bolts, nut and washers etc. complete.

Each 3.00 3.00 60.15 180.45

9.66 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with

necessary screws etc. complete :9.66.1 125 mm Each 5.00 5.00 23.75 118.75

9.96 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not

less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade

with nuts and screws etc. complete :9.96.2 250x16 mm Each 3.00 3.00 168.95 506.85

9.97 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less

than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with

necessary screws etc. complete :9.97.1 300x10 mm Each 3.00 3.00 100.40 301.20

9.97.3 200x10 mm Each 3.00 3.00 71.05 213.15

9.100 Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than

grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with

necessary screws etc. complete :9.100.1 125 mm Each 5.00 5.00 62.50 312.50

9.101 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic

coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour

and shade with necessary screws etc. complete.9.101.1 Single rubber stopper Each 3.00 3.00 28.60 85.80

Signature of EPIL

4 / 9

ESS CIVIL BOQ


QTYAMOUNT

(in Rs)

S


ELECTRI

CAL SUB UNIT

RATE

(in Rs)

9.119 Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness

of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined

with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door frame

profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket

weather seal to be provided through out the frame. The door frame to be fixed to the wall

using M.S. screws of 65/100mm size, complete as per manufacturers specification and

direction of Engineer-in-Charge.

R.M. 3.00 3.00 404.60 1213.80

9.120 Providing and fixing factory made panel PVC door shutter consisting of frame made out of

M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for

top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and

manufacture . M.S. frame covered with 5mm thick heat moulded PVC 'C' channel of size

30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered

in 45degree angle on both side forming styles; and 5mm thick, 95mm wide PVC sheet out of

which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form

top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm

shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided

both side of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet be provided as

gap insert for top rail & bottom rail. paneling of 5mm thick both side PVC sheet to be fitted

in the M.S. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm

wide PVC sheet beading on inner side, and joined together with solvent cement adhesive.

An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the

'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-

charge. Manufacturer’s specification & drawing.

9.120.1 30 mm thick plain PVC door shutters. R.M. 1.50 1.50 2499.20 3748.80

TOTAL [V] 32661.25

VI STEEL WORK 10.0

Signature of EPIL

5 / 9

ESS CIVIL BOQ


QTYAMOUNT

(in Rs)

S


ELECTRI

CAL SUB UNIT

RATE

(in Rs)

16 10.6 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths,

interlocked together through their entire length and jointed together at the end by end

locks, mounted on specially designed pipe shaft with brackets, side guides and

arrangements for inside and outside locking with push and pull operation complete,

including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured

from high tensile steel wire of adequate strength conforming to IS: 4454 – part 1 and M.S.

top cover of required thickness for rolling shutters.10.6.1 80x1.25mm M.S. laths with 1.25 mm thick top cover. Sq.M 5.00 5.00 1840.85 9204.25

17 10.7 Providing and fixing ball bearing for rolling shutters. Each 2.00 2.00 429.85 859.70

18 10.9 Extra for providing grilled rolling shutters manufactured out of 8 mm dia. M.S. bar instead

of laths as per design approved by Engineer-in-charge.(area of grill to be measured).

Sq.M 2.00 2.00 261.35 522.70

19 10.14 Providing and fixing pressed steel door frames conforming to IS: 4351 manufactured from

commercial mild steel sheet of 1.60 mm thickness including hinges, jamb, lock jamb, bead

and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.60

mm pressed mild steel welded or rigidly fixed together by mechanical means, including M.S.

pressed butt hinges, 2.5mm thick with mortar guards, lock strike-plate and shock absorbers

as specified and applying a coat of approved steel primer after pre-treatment of the surface

as directed by Engineer-in-charge:10.14.1 Profile B

10.14.1.1 Fixing with adjustable lugs with split end tail to each jamb. R.M 80.00 80.00 346.75 27740.00

10.25 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in

position and applying a priming coat of approved steel primer using structural steel etc. as

required.10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. Kg 180.00 180.00 77.90 14022.00

TOTAL [VI] 52348.65

VII

11.4 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm

thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement

hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, .hardening

compound mixed @ 2 litre per 50kg of cement or as per manufacturers specifications. This

includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.

Sq.M 40 40.00 420.50 16820.00

FLOORING 11.0

Signature of EPIL

6 / 9

ESS CIVIL BOQ


QTYAMOUNT

(in Rs)

S


ELECTRI

CAL SUB UNIT

RATE

(in Rs)

11.20 Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with

neat cement slurry mixed with pigment to match the shade of tiles including rubbing and

cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse

sand).11.20.2 Medium shade using 50% white cement 50% Grey cement. Sq.M 10.00 10.00 789.55 7895.50

21 mr mADANAPALLI slab flooring over 20 mm (average) thick base laid over and jointed with

grey cement slurry mixed with pigment to match the shade of the slab including rubbing

and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

25 mm thick. Sq.M 45.00 45.00 1364.00 61380.00

22 mr Madanapalli slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm

(average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement

slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing

complete.

Sq.M 15.00 15.00 1364.00 20460.00

11.31 Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. R.M. 5.00 5.00 52.45 262.25

11.32 Extra for madanapalli stone/ sand stone in treads of steps and risers using single length up

to 1.05 metre .

Sq.M 3.00 3.00 12.10 36.30

11.36 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness

to be specified by the manufacturer ) of approved make in all colours, shades except

burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting,

risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse

sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white

cement mixed with pigment of matching shade complete.

Sq.M 7.00 7.00 724.25 5069.75

11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by

the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such

as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement

: 4 Coarse sand) including pointing the joints with white cement and matching pigment etc.,

complete.

Sq.M 3.00 3.00 764.55 2293.65

mr Providing and laying madanapalli floor tiles in different sizes (thickness to be specified by

the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of

approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement

: 4 coarse sand) including grouting the joints with white cement and matching pigments

etc., complete.Size of Tile 600x600 mm Sq.M 8.00 8.00 1364.00 10912.00

[TOTAL VII] 125129.45

Signature of EPIL

7 / 9

ESS CIVIL BOQ


QTYAMOUNT

(in Rs)

S


ELECTRI

CAL SUB UNIT

RATE

(in Rs)

VIII

12.21 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone

aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement :

3 fine sand) as per standard design :12.21.1 In 75x75mm deep chase R.M. 30.00 30.00 109.05 3271.50

[TOTAL VIII] 3271.50

IX

23 13.2 15 mm cement plaster on the rough side of single or half brick wall of mix :

13.2.1 1:4 (1 cement: 4 fine sand) Sq.M 15.00 15.00 143.35 2150.25


24 13.4 12 mm cement plaster of mix :

13.4.1 1:4 (1 cement: 4 coarse sand) Sq.M 190.00 190.00 132.10 25099.00

13.10 15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat

cement on the rough side of single or half brick wall.

Sq.M 8.00 8.00 196.75 1574.00

25 13.16 6 mm cement plaster of mix :


13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to

prepare the surface even and smooth complete

Sq.M 190.00 190.00 83.80 15922.00

13.37 White washing with lime to give an even shade:

13.37.1 New work (three or more coats) Sq.M 40.00 40.00 11.75 470.00

26 13.41 Distempering with oil bound washable distemper of approved brand and manufacture to

give an even shade13.41.1 New work (two or more coats) over and including water thinnable priming coat with cement

primer.

Sq.M 180.00 180.00 66.70 12006.00

28 13.47 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of

required shade13.47.1 New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including priming coat

of exterior primer applied @ 2.20 kg/ 10 sqm).

Sq.M 180.00 180.00 80.45 14481.00

29 13.50 Applying priming coat :

13.50.3 With ready mixed red oxide zinc chromate primer of approved brand and manufacture on

steel galvanised iron/steel works

Sq.M 10.00 10.00 20.70 207.00

ROOFING 12.0

FINISHING 13.0

Signature of EPIL

8 / 9

ESS CIVIL BOQ


QTYAMOUNT

(in Rs)

S


ELECTRI

CAL SUB UNIT

RATE

(in Rs)

30 13.61 Painting with synthetic enamel paint of approved brand and manufacture to give an even

shade :13.61.1 Two or more coats on new work. Sq.M 30.00 30.00 53.85 1615.50

[TOTAL IX] 103020.75

X

16.70 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50mm

including strengthening with 2mm dia wire or nuts, bolts and washers as required complete

as per the direction of Engineer-in-charge.16.70.1 Made of G.I. wire of dia 4mm. Sq.M 30.00 30.00 486.20 14586.00

[TOTAL X] 14586.00

XI

1 N.S - 1 MS BOX TUBULAR SECTION

Providing and fixing factory made shutters with M.S. box tubular section 75x30x1.25mm

thick in windows and ventilators Side/Top/Centre Hung joints mitred and flash butt welded

to pressed steel frames of windows. (Glass beading & wire gauge to be measured

seperately).

Kg 130.00 130.00 96.00 12480.00

N.S - 2 Providing & fixing Float Glass 4mm thick (10Kg / Sqm) with steel beading of approved

shape & section with screws in pressed steel door, window & CSW's Frames/Shutter & M.S.

Tubular section shutters of doors & windows.

Sq.M 10.00 10.00 620.00 6200.00

18680.00

ROADS 16.0

[TOTAL XI]

NON SCHEDULE ITEMS

Signature of EPIL

9 / 9

ESS CIVIL BOQ


DSR 2012 NON-DSR

1 SANITARY FIXTURES 3317.30 18643.25

2 TOILET REQUISIES 1127.00 3812.00

3 SOIL , WASTE, VENT AND RAIN WATER PIPES AND FITTINGS 68436.75 4347.22

4 WATER SUPPLY PIPES AND FITTINGS 21822.90 7076.45

5 EXTERNAL SEWERAGE SYSTEM 103765.20

Total C/F To Summary 198469.15 33878.92



Chittoor (A.P)

SUMMARY OF COST


INTERNAL PLUMBING WORK


Signature of EPIL

1 / 1

ESS PLUMBING SUMMARY


S.

No DSR-2014 DESCRIPTION UNIT QTY RATE AMOUNT

I

1 17.2.1 Providing and fixing white vitreous china pedestal type water closet (European

type W.C. pan) with ISI marked white solid plastic seat and lid, 10 litre low

level white P.V.C. flushing cistern with manually controlled device (handle

lever), conforming to IS : 7231, with all fittings and fixtures complete including

cutting and making good the walls and floors wherever required. each 1.00 3,317.30 3317.30

TOTAL SUB HEAD (I) (DSR) 3317.30

2 17.7.1 Providing white viterous china Wash Basin size 550 x 450 mm with C.P.

brass pillar tap of an approved design and make, CI/MS brackets, 32 mm

C.P. brass waste of standard pattern, standard quality P.V.C. waste pipe.

(Parryware C0418 & Jaquar 021 or equivalent)each 1.00 2331.15 2331.15

3 17.4.1 Providing white vitreous china ISI marked half stall Urinal size 590 mm x

400 mm x 380 mm with C.P. spreader, C.P. brass waste and C.P.brass

bottle trap, brackets etc. (Parryware magnum C0575, C8095, Jaquar 773

or equivalent) each 1.00 3326.10 3326.10

4 MR Providing flushing valve for urinals complete with installation box, control

cock, batteries (Jaquar 51087 or equivalent) each 1.00 11209.00 11209.00

5 MR Providing 32 mm dia. C.P.Brass bottle trap with 190 mm long wall

connection pipe in place of P.V.C. waste pipe for wash basin discharge.

(Jaquar 773 or equivalent) each 1.00 865.00 865.00

6 MR Providing 40 mm dia. C.P.Brass bottle trap with 190 mm long wall

connection pipe in place of P.V.C. waste pipe for Sink discharge (Jaquar

777 or equivalent) each 1.00 912.00 912.00

BILL OF QUANTITIES

PLUMBING WORKS

SUB HEAD (I) :- SANITARY FIXTURES (DSR ITEMS)

SUB HEAD (I) :- SANITARY FIXTURES (NON DSR ITEMS)

Signature of EPIL

1 / 8

ESS PLUMBING BOQ


S.


TOTAL SUB HEAD (II) (NON-DSR) 18643.25

II

1 17.31 Providing & Fixing 600 X 450 mm bevelled edge mirror of superior glass (of

approved quality) complete with 6mm thick hard board ground fixed to wooden

cleats with C.P. brass screws and washers complete. each 1.00 793.00 793.00

2 17.34.2 Providing & fixing viterous china toilet paper holder. each 1.00 334.00 334.00

TOTAL SUB HEAD (II) (DSR) 1127.00

3 MR Providing and fixing of 450 mm long C. P. brass towel rail complete with C.P.

brass brackets each 1.00 417.00 554.00

4 MR Providing white vitreous china urinal partition for half stall urinals.

(Parryware C0571 or equivalent) each 2.00 1629.00 3258.00

TOTAL SUB HEAD (II) (NON-DSR) 3812.00

III

The following items include providing, fixing and testing in position of ISI marked

(IS : 3989) centrifugally cast spun iron soil, waste, vent and rain water

pipes and fittings cut to required lengths, fixing at wall, ceiling or on floor

including connections to all required fittings complete in all respects.

Providing & fixing pipes.

17.35.1.2 100mm dia Centrifugally cast (spun) iron S & S Pipe metre 30.00 917.75 27532.50

17.35.2.2 75mm dia Centrifugally cast (spun) iron S & S Pipe metre 15.00 791.30 11869.50

SUB HEAD (III) :- SOIL , WASTE, VENT AND RAIN WATER PIPES AND FITTINGS

(Centrifugally Cast Spun Iron) (DSR'2012)

1

SUB HEAD (II) :- TOILET REQUISIES (DSR'2012)

SUB HEAD (II) :- TOILET REQUISIES (NON-DSR)

Signature of EPIL

2 / 8

ESS PLUMBING BOQ


S.


Providing lead Caulked joints to sand cast iron/centrifugally cast (spun) iron

pipes & fittings of diameters.17.58.1 100 mm each 10.00 243.75 2437.50

17.58.2 75 mm each 5.00 205.30 1026.50

Providing & fixing M. S. holder - bat clamps of approved design to sand Cast

iron/cast iron (spun) pipe embedded in & including cement concrete blocks

10*10*10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate

20 mm nominal size). Including cost of cutting holes&making good the walls etc.

17.37.1 For 100 mm dia pipe each 10.00 152.90 1529.00

Providing & fixing sand cast iron S&S trap of self cleaning design with sand cast

iron screwed down or hinged grating with or without vent arm complete, including

cost of cutting & making good the walls and floors.

17.60.2.1 100 mm inlet & 75 mm outlet each 8.00 1020.90 8167.20

Providing & fixing Sand Cast iron S & S coller

17.57.1.2 100 mm dia each 7.00 318.35 2228.45

17.57.2.2 75 mm dia each 4.00 219.75 879.00

Providing & fixing sand cast iron S & S bend of required degree with access

door insertion rubber washer 3 mm thick, bolts & nuts complete .

17.38.1.2 100 mm dia each 4.00 385.70 1542.80

Providing & fixing heel rest sand cast iron S & S sanitary Bend.

17.40.1.2 100 mm dia each 4.00 371.75 1487.00

Providing & fixing plain sand cast iron S & S Bend of required degree.

17.39.1.2 100 mm dia each 4.00 335.75 1343.00

Providing & fixing single equal plain sand cast iron S&S junction of required

degree with access door, insertion rubber washer 3 mm thick bolts & nuts

complete.

17.43.1.2 100 * 100 * 100 mm each 4.00 623.80 2495.20

6

7

8

9

2

3

4

5

Signature of EPIL

3 / 8

ESS PLUMBING BOQ


S.


10 17.47.1.2 Providing & fixing single unequal 100*100*75 mm sand cast iron S & S junction

of required degree with access door,insertion rubber washers 3mm thick,

bolts&nuts complete. each 4.00 792.20 3168.80

Providing & fixing of sand cast iron S & S terminal guard .

17.56.1.2 100 mm dia each 6.00 434.50 2607.00

12 12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm

diameter and weighing not less than 440 grams. each 3.00 41.10 123.30

TOTAL SUB HEAD (III) (DSR'2012) 68436.75

13 MR Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over

floor traps. each 3.00 103.74 311.22

Providing and fixing in position G.I. medium class (IS:1239) waste pipes with all

necessary specials complete with cutting and chasing walls and floors etc. and

making good the same including painting the pipes with two coats of anti-

corrosive paint. The pipe run in toilet floor shall be covered be covered in and

around 75 mm thick 1:2:4 concrete.

MR 32mm nominal bore metre 5.00 364.40 1822.00

MR 40mm nominal bore metre 5.00 442.80 2214.00

TOTAL SUB HEAD (III) (NON-DSR) 4347.22

IV

Providing, fixing G. I. pipes complete with G. I. fittings and clamps including

cutting and making good the walls etc. (internal work) - (Exposed on wall)18.10.1 15mm dia nominal bore metre 12.00 215.10 2581.20

18.10.2 20mm dia nominal bore metre 5.00 249.30 1246.50

14

SUB HEAD (IV) :- WATER SUPPLY PIPES AND FITTINGS (DSR'2012)

1.

11

SUB HEAD (III) :- SOIL , WASTE, VENT AND RAIN WATER PIPES AND FITTINGS

(Centrifugally Cast Spun Iron) (NON DSR'2012)

Signature of EPIL

4 / 8

ESS PLUMBING BOQ


S.


Providing, fixing G. I. pipes complete with G. I. fittings and clamps including

cutting and making good the walls etc (internal work) - Concealed pipe

including painting with anti corrosive bitumastic paint, cutting chases and making

good the wall.



Painting G. I. pipes and fittings with synthetic enamel white paint over a ready

mixed priming coat, both of approved quality for new work.



Providing & fixing gun metal gate valve with C.I. wheel of approved quality

(screwed end)18.17.2 32 mm nominal bore each 2.00 501.50 1003.00

5 18.21.2.1 Providing & fixing 15 mm nominal bore 45 cm long unplasticised PVC

connection pipe with brass unions. each 5.00 68.60 343.00

6 18.49.1 Providing & fixing 15 mm nominal bore CP brass bib cock of approved quality

conforming to IS 8931. each 2.00 459.50 919.00

8 18.53.1 Providing & fixing 15 mm nominal bore C.P brass angle valve for basin mixer and

geyser points of approved quality conforming to IS 8931. each 4.00 507.70 2030.80

9 18.22.1 Providing & fixing 100 mm dia C.P brass shower rose with 15 mm inlet. each 2.00 72.05 144.10

10 18.32.1 Constructing brick masonry chamber 300 x 300 x 500 mm, inside with

F.P.S. brick work in cement mortar 1: 4 (1 cement : 4 coarse sand) for Stop

Cock, with C. I. surface box 100 x 100 x 75 mm (inside) with hinged cover fixed

in cement concrete slab 1:2:4mix (1cement : 2 coarse sand:4 grade stone

aggregate 20mm nominal size); necessary excavation, foundation concrete

1:5:10 (1 cement :5 fine sand: 10 graded stone aggregate 40mm nominal size)

and inside plastering with cement mortar 1 : 3 (1 cement : 3 coarse sand ) 12

mm thick finished with a floating coat of neat cement complete as per standard

designeach 2.00 1157.75 2315.50

2.

3.

4.

Signature of EPIL

5 / 8

ESS PLUMBING BOQ


S.


18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage

tank ISI : 12701 marked with cover and suitable locking arrangement and making

necessary holes for inlet, outlet and overflow pipes but without fittings and the

base support for tankPer

Litre 1000.00 7.25 7250.00

TOTAL SUB HEAD (IV) (DSR'2014) 21822.90

Providing & fixing brass ball float valve with bronze floats of approved

quality complete. (Make : Zoloto / Audco)MR 25 mm nominal dia each 3.00 1433.75 4301.25

Providing & fixing of hand lever operated forged brass body full way ball valve

type isolating valve having forged brass hard chrome plated mirror finish ball,

steel handle with PVC grip, teflon seat, screwed ends tested to a pressure of 15

kg/sqcm complete.MR 15 mm nominal bore each 2.00 541.30 1082.60

MR 20 mm nominal bore each 2.00 736.00 1472.00

Providing & fixing of medium class G.I.spout up to 300 mm. length including

cutting and making good the walls and floors etc. as required.MR a) 25 mm dia each 2.00 110.30 220.60

TOTAL SUB HEAD (IV) (NON-DSR) 7076.45

V

(DSR'2012)

SUB HEAD (IV) :- WATER SUPPLY PIPES AND FITTINGS (NON-DSR)

11

13

14

SUB HEAD (V) :- EXTERNAL SEWERAGE SYSTEM

Signature of EPIL

6 / 8

ESS PLUMBING BOQ


S.


Excavating trenches in all kind of soil of required width for pipes. including

excavation for sockets and dressing of sides, ramming of bottoms, including

getting out the excavated soil & then returning the soil as required, in layers not

exceeding 20 cm in depth including consolidating each deposited layer by

ramming, watering, etc & disposing of surplus excavated soil as directed within a

lead of 50m.up to 1.50 m depth

2.10.1.2 Pipes 80 mm to 300 mm diameter metre 35.00 208.30 7290.50

Providing, laying and jointing glazed stone ware pipes grade `A' with stiff

mixture of cement mortar in the proportion of 1:1 (1cement :1 fine

sand) including testing of joints etc complete.

19.1.2 150 mm diameter metre 35.00 314.35 11002.25

Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 coarse sand :

10 gradded stone aggregate 40 mm nominal size) alround S.W. Pipes

including bed concrete as per standard design.

19.2.2 150 mm diameter S.W.Pipe metre 25.00 724.70 18117.50

Constructing brick masonry manhole with F.P.S. bricks in cement mortar 1 : 4

(1 cement : 4 coarse sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse

sand : 4 grade stone aggregate 20mm nominal size); foundation concrete 1:4:8

mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal

size) inside plastering 12 mm thick with cement mortar 1:3 (1cement 3 coarse

sand ) finished with a floating coat of neat cement and making channels in

cement concrete 1:2:4 (1cement : 2 coarse sand: 4 graded stone aggregate 20

mm nominal size) finishd with a floating coat of neat cement complete as per

standard design

19.7.1.1 Inside size 90 x 80 cm & 45 cm deep including CI cover with frame (light duty)

455 x 610mm internal dimension total wt. of cover & frame to be not less than 38

kg (wt. of cover 23 kg and wt. of frame 15 kg) each 6.00 8507.00 51042.00

Extra for depth for manhole with F.P.S. bricks

19.8.1.1 size 90 X 80 cm metre 2.00 5638.20 11276.40

1

2

3

4

5

Signature of EPIL

7 / 8

ESS PLUMBING BOQ


S.


Providing and fixing square mouth S. W. Gully trap grade `A' complete with

C.I. grating brick masonry chamber with F.P.S bricks and water tight CI cover

with frame of 300 x 300 mm size (inside) the weight of cover to be not less than

4.50 kg and frame to be not less than 2.70 kg as per standard design

19.4.3.1 180 x 150 mm. size P type each 3.00 1678.85 5036.55

TOTAL SUB HEAD (V) (DSR'2012) 103765.20

6

Signature of EPIL

8 / 8

ESS PLUMBING BOQ


S. NO DESCRIPTION DSR-2012 NON-DSR

I INTERNAL WIRING 83391.00 34280.30

II DISTRIBUTION BOARDS & MCB's 7641.00

III EARTHING SYSTEM 220499.90

IV MISCELLANEOUS 9038.50

V INTERNAL LIGHTING FIXTURES & FANS 3721.00 43949.76

TOTAL COST OF ELECTRICAL WORKS 315252.90 87268.56

Proposed construction of external development & bulk services (civil & electrical works) for

ITBP at Kalikiri, Chittoor (A.P)

INTERNAL ELECTRICAL WORKS

SUMMARY OF COST


Signature of EPIL

1 / 1

ESS ELECTRICAL SUMMARY


S.


SUB HEAD (I) :- INTERNAL WIRING (DSR)

Point wiring in PVC conduit, with piano type switch :-

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sqmm FR PVC

insulated copper conductor single core cable in surface / recessed PVC conduit, with piano

type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sqmm

FR PVC insulated copper conductor single core cable etc. as required.1.8.2 PT 25.00 543.00 13575.00

Power plug wiring in PVC conduit (2 x 4 sqmm.) :-1.12 Wiring for power plug with 2 x 4 sqmm. FR PVC insulated, copper conductor single core cable

in surface / recessed PVC conduit along with 1 no 4 sqmm FR PVC insulated copper conductor

single core cable for loop earthing as required. M 8.00 162.00 1296.00

Circuit / Sub main wiring in PVC conduit :-

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of PVC

insulated, copper conductor single core cable in surface/ recessed PVC conduit as required.1.14.9 4 x 6 sq.mm. + 2 x 6 sq.mm. Earth wire M 55.00 389.00 21395.00

1.14.10 4 x 10 sq.mm. + 2 x 10 sq.mm. Earth wire M 75.00 597.00 44775.00

S/F light plug point piano type accessories :-1.29 Supply and fixing metal box of 150 mm x 75 mm x 60 mm deep (nominal size) on surface or in

recess with suitable size of phenolic laminated sheet cover in front including providing and fixing

3 pin 5/6 amps socket outlet and 5/6 amps. piano type switch, connection, painting etc. as

required. Each 5.00 194.00 970.00

S/F power plug point piano type accessories :-1.30 Supply and fixing metal box of 180 mm x 100 mm x 60 mm deep (nominal size) on surface or in

recess with suitable size of phenolic laminated sheet cover in the front including providing and

fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amp piano type switch, connection,

painting etc as required. Each 5.00 276.00 1380.00

TOTAL SUB HEAD (I) DSR 83391.00

SUB HEAD (I) :- INTERNAL WIRING (NON DSR)

4

5

BILL OF QUANTITIES

INTERNAL ELECTRICAL WORKS

1

2

3

Signature of EPIL

1 / 4

ESS ELECTRICAL BOQ


S.


1 Supply all materials, receiving, storing, handling, fixing, laying, wiring and testing for power

outlets using ISI marked (IS:694) single core, flexible, flame retardant low smoke (FRLS), stranded

copper conductors PVC insulated 1100 Volt grade wiring in concealed/ exposed system using

20/25 mm ERW black stove enamelled screwed type, ISI marked rigid steel conduit of wall

thickness 16 SWG conforming to IS 9537 part II including all conduit accessories, such as bends,

tees, draw boxes, MS point control boxes with zinc plating and yellow passivation, together with

wiring accessories such as white modular plate type switches and sockets, cover plate, grid

plate etc. including submain wiring from DB to outlet with Cu earth continuity wire, conduit being

laid in recess (concealed) either in ceiling slab / wall, chasing on surface or under false ceiling

including required clamping arrangement and required length of MS flexible conduit or in wooden

partitions etc. complete as required at site.

a MR 20 amp SPN industrial metal clad outlet in MS box with 20 amp C series MCB and metal plug top

instead of modular switch & sockets by 2x6 + 4 sq mm copper wires. 5 NOS 5696.30 28481.50

b MR 3 pin 16 amp shuttered socket outlet connected to AC switch by 2x4 + 2.5 sq mm copper wires. (A

C socket outlet provided outside at about 2500 mm height). The AC switch will be provided under

separate item as below. 5 NOS 1159.76 5798.80

TOTAL SUB HEAD (I) (NON DSR) 34280.30

SUB HEAD (II) :- DISTRIBUTION BOARDS & MCB's

Supplying and fixing 5 amps. to 32 amps. rating, 240 volts `C' series, miniature circuit

breaker (MCB)suitable for inductive load of following poles in the existing MCB DB complete

with connections, testing and commissioning etc. as required.2.10.1 single pole Each 5.00 169.00 845.00

2.10.2 single pole and neutral Each 441.00

2.10.5 triple pole and neutral Each 5.00 887.00 4435.00

2 2.11 Supplying & fixing single pole, blanking plate in the existing MCB DB complete etc. as required.Each 3.00 7.00 21.00

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

2.12.1 40 amps. Each 5.00 218.00 1090.00

2.12.2 63 amps. Each 5.00 250.00 1250.00

TOTAL SUB HEAD (II) 7641.00

SUB HEAD (IV) :- EARTHING SYSTEM

1

3

Signature of EPIL

2 / 4

ESS ELECTRICAL BOQ


S.


1 5.3 Earthing with GI earth plate 600mm x 600 mm x 6mm thick including accessories and providing

masonary enclosure with cover plate having locking arrangement and watering pipe etc. (but

without charcoal or coke and salt ) complete as required. Set 10.00 3557.00 35570.00

2 3.7 Extra for using salt and charcoal for G.I. or copper plate earth electrode as required. Set 10.00 801.99 8019.90

3 5.70 Supplying and laying 6 SWG G.I. wire at 0.50 M. below ground level for conductor earth

electrode, including soldering etc as required. M 25.00 27.00 675.00

4 3.15 Providing and laying earth connections from earth electrode with 6 SWG dia G.I. wire in 15 mm

dia G.I. pipe from earth electrode as required. M 25.00 27.00 675.00

5.60 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and

providing masonry enclosure with cover plate having locking arrangement and watering pipe of

2.7 metre long etc. with charcoal/ coke and salt as required. set 10.00 8359.00 83590.00

5.10 Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode

including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.M 85.00 1082.00 91970.00

TOTAL SUB HEAD (IV) 220499.90

SUB HEAD (V) :- MISCELLANEOUS

1 Providing, Laying and jointing of Spigot & socket type RCC NP-3 pipes suitable for rubber ring

joints including rings, testing of joints etc. for cable laying along roads, under road crossings or for

entry into the building as required.MR 150 mm dia. M 10.00 352.45 3524.50

2 Providing, Laying 150 mm thick PCC 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate) all round

RCC pipes for cable laying. The PCC shall be cured as required. MR 150 mm diameter RCC Pipe CUM 1.50 3676.00 5514.00

TOTAL SUB HEAD (IV) NON DSR 9038.50

SUB HEAD (V) :- INTERNAL LIGHTING FIXTURES & FANS

SUPPLY OF LIGHTING FIXTURES

Supply of wall / ceiling surface mounted fluorescent tube light luminaires with all accessories

as per standard item ballasts, starters, capacitor, control gear box, including required nos.

fluorescent tube etc complete as required as per the standard catalogue item.MR 1 x 18 watt Slimlite plus (Philips TMS 500/118) Nos 16.00 774.06 12384.96

MR 1 x 36 watt Slimlite (Philips TMS 500/136) Nos 8.00 945.60 7564.80

SUPPLY OF CEILING & EXHAUST FANS

Supply of AC 230/250 volts, 50 HZ ceiling fan with standard down rod, blades, 2 nos. caps etc.

complete (Make : Bajaj / Crompton)

1

1

Signature of EPIL

3 / 4

ESS ELECTRICAL BOQ


S.


MR 1400 mm sweep Nos 4.00 1600.00 6400.00

Supply of AC 230/250 volts, 50 HZ exhaust fans including providing nuts, bolts, mounting frame

and other accessories etc. complete (Make : Bajaj / Crompton Khaitan)

MR 300 mm sweep 1400 rpm Nos 10.00 1760.00 17600.00

TOTAL SUB HEAD (V) NON DSR 43949.76

ERECTION OF LIGHTING FIXTURES AND FANS

1 1.35 Erection of wall bracket / ceiling fittings of all sizes and shapes containing upto two GLS

lamps per fitting, complete with all accessories including connections etc. as required. Each 14.00 52.00 728.00

2 1.44 Installation, testing and commissioning of ceiling fan including wiring the down rod of standard

length (upto 30 cm.) with 1.5 sq. mm. PVC insulated, copper conductor, single core cable etc. as

required. Each 3.00 95.00 285.00

3 1.46 Installation, testing and commissioning of resistance type ceiling fan regulator in existing switch

box including connection with 1.5 sq.mm. PVC insulated, copper conductor, single core cable,

earthing the regulator etc. as required. Each 5.00 52.00 260.00

4 1.50.1 Installation of exhaust fan upto 450 mm sweep in the existing opening, including making the hole

to suit the size of the above fan, making good the damage, connections, testing, commissioning etc.

as required. Each 12.00 204.00 2448.00

TOTAL SUB HEAD (V) 3721.00

1

2

Signature of EPIL

4 / 4

ESS ELECTRICAL BOQ


2.8.1 ALL SOILS

A

PERIMATER OF WALL 6 27.22Total M3 27.22 157.50 4,286.52

16.3 Supplying and stacking at site 16.3.8 Gravel

Total filling at site at per item no. 6 56.40

Total Qty to be supplied at

siteM3

56.40 320.90 18,098.76

4.1

4.1.8

RRM BELOW 6 3.40under floor 6 5.64Total M3 9.04Total for 1 No. Blocks M3 9.00 4301.15 38,710.35

6.4

Sub Head : Earth workDSR Item No:- 2.9

Excavation work by mechanical means (Hydraulic excavator)/ manual

means in over areas (not exceeding 1.5m in width or 10 sqm on

plan), including upto 1.5 m, including getting out the excavated soil

and disposal ofdressing of sides and ramming of bottoms, lift surplus

excavated soils as directed, within a lead of 50 m..

Providing and laying in position cement concrete of specified grade

excluding the cost of centring and shuttering - All work upto plinth

level:

1:4:8 (1 Cement: 4 coarse sand : 8 graded stone aggregate 40 mm

nominal size)

Brick work with common burnt clay FPS (Non modular) bricks of

class designation 75 in super structure above plinth level upto floor

V level in all shapes and sizes in :

ESTIMATE FOR GUARD ROOM ON COMPOUND WALL AT ITBP,CHOTTOOR.S.No. Details of works Unit No Quantity

RATE AMOUNT

6.4.2 Cement mortar 1:6 (1 cement: 6 coarse sand)

A230 mm Brick Work in suerstructureGround FloorWALL 6 3.73TOTAL M3 3.73 6006.20 22,379.10

MR

PERIWALL 6 22.686 25.52

GRAND TOTAL Cum 48.20Total Cum 48.00 2930.89 1,40,682.52

MR

Ground FloorW1 18 171.00TOTAL RMT 171.00

1 0.5265 79727.00 41,976.27

TOTAL CUM

9.9.1.2

W1 sqm 18 35.1035.10 2374.15 83,332.67

Random rubble masonry with hard stone in foundation and plinth

including levelling up with cement concrete 1:6:12 (1 cement : 6

coarse sand : 12 graded stone aggregate 20 mm nominal size) upto

plinth level with Cement mortar 1:6 (1 cement : 6 coarse

sand)inclusive of labour cutting and dressing of stone (The Stone

boulders shall be issued free of cost at site)

Providing wood work in frames of doors, windows, clerestory

windows and other frames, wrought framed and fixed in position

with hold fast lugs or with dash fasteners of required dia & length

(hold fast lugs or dash fasteners shall be paid for separately).

Second class teak wood

Providing and fixing glazed shutters for doors, windows and

clerestory windows using 4 mm thick float glass panes, including ISI

marked M.S. pressed butt hinges bright finished of required size

with necessary screws

9.97

9.97.4W1 Each 36 36.00 65.35 2,352.60

ROOM 6 37.80 1367.00 51,672.60

SQM

13.5

13.5.21:6 (1 cement: 6 coarse sand)

EXTERNAL PLASTER

Total length by polyline 6 75.60Less W1 -3 -6.75

68.85 183.45 12,630.53

13.3313.33.2

PERI WALL 6 114.00

GRAND TOTAL Sqm 114.00 276.70 31,543.80

13.4613.46.1

Providing and laying polished Granite stone(MADANAPALLI) flooring

in required design and patterns, in linear as well as curvilinear

portions etc. complete as per the architectural drawings with 18mm

thick stone slab over 20 mm (average) thick base of cement mortar

1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry

and pointing with white cement slurry admixed with pigment of

matching shade including rubbing, curing and polishing etc. all

complete as specified and as directed by the Engineer- in-Charge.

15 mm cement plaster on rough side of single or half brick wall of

mix :

Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine Raised and cut pointing

Finishing walls with Acrylic Smooth exterior paint of required New work (Two or more coat applied @ 1.67 ltr/10 sqm over and

including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm

P/F aluminium tower bolts ISI Marked anodised (anodic coating not

less then grade AC 10 as per IS :1868) transparent or dyed to

required colour or shade with necessary screw etc. complete.

150 x 10 mm

Quantity as per item 68.85 Total SQM 68.85 90.00 6,196.50

10.2

Area of sheet roofing6 12.00

Total 12.00Assumed weight @ 15 KG per

per Sqm

180.00

GRAND TOTAL KG 180.00KG 180.00 73.95 13,311.00

12.50

Area of sheet roofing6 24.00

GRAND TOTAL Sqm 24.00Total for Sqm 24.00 622.00 14,928.00

4,82,101.21

Structural steel work riveted, bolted or welded in built up sections,

trusses and framed work, including cutting, hoisting, fixing in

position and applying a priming coat of approved steel primer all

complete

Providing and fixing precoated galvanised iron profile sheets (size,

shape and pitch of corrugation as approved by Engineer-in-charge)

0.50 mm (+ 0.05 %) total coated thickness with

S.NO. (DSR-14) DESCRIPTION UNIT NOS QTY. RATE

A. SANITARY INSTALLATIONS DSR N.DSR

1 DSR-17.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100

mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern,

including flush pipe, with manually controlled device (handle lever) conforming

to IS : 7231, with all fittings and fixtures complete, including cutting and making

good the walls and floors wherever required.

DSR-17.1.1White Vitreous china Orissa pattern W.C. pan of size 580x440

mm with integral type foot rests50 3392.8 169640

2 17.2 Providing and fixing white vitreous china pedestal type water closet

(European type W.C. pan) with seat and lid, 10 litre low level white P.V.C.

flushing cistern, including flush pipe, with manually controlled device (handle

lever), conforming to IS : 7231, with all fittings and fixtures complete, including

cutting and making good the walls and floors wherever

17.2.1 W.C. pan with ISI marked white solid plastic seat and lid 139 3317.000 461063.000

3 DSR-17.3 Providing and fixing white vitreous china pedestal type water closet (European

type) with seat and lid, 10 litre low level white vitreous china flushing cistern &

C.P. flush bend with fittings & C.I.brackets, 40mm flush bend, overflow

arrangement with specials of standard make and mosquito proof coupling of

approved municipal design complete including painting of fittings and brackets,

cutting and making good the walls and floors wherever required :

DSR-17.3.1 W.C. pan with ISI marked white solid plastic seat and lid. 115 4784.6 550229

17.5 Providing and fixing white vitreous china flat back half stall urinal of size

580x380x350 mm with white PVC automatic flushing cistern, with fittings,

standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P.

brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other

couplings in C.P. brass, including painting of fittings and cutting and making good

the walls and floors wherever required

17.5.1 Single half stall urinal with 5 litre P.V.C. automatic flushing

cistern

103 6591.100 678883.3

Combined BOQ for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)

BILL OF QUANTITY-PLUMBING - ITBP BASE CAMP

Amount

1

4 DSR-17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32

mm C.P. brass waste of standard pattern, including painting of fittings and

brackets, cutting and making good the walls wherever require :

5 DSR-17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. 82 2331.15 191154.3

17.7.3White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm

C.P. brass pillar taps 292127.9

61709.117.7.4 White Vitreous China Flat back wash basin size 550x 400 mm

with single 15 mm C.P. brass pillar tap

Each 225.000

1807.1 406597.5

6 17.28Providing and fixing P.V.C. waste pipe for sink or wash basin including

P.V.C. waste fittings complete.17.28.2 Flexible pipe17.28.2.2 40 mm dia Each 38 76.75 2916.5

7 17.8 Providing and fixing white vitreous china battery based infrared sensor operated

urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water

(250 ml & 500 ml consumption), having water inlet from back side, including

fixing to wall with suitable brackets all as per manufacturers specification and

direction of Engineer-in-charge.Each 1.00 16724.95

16724.95

8 17.29 Providing and fixing 100 mm sand cast Iron grating for gully trap. Each 20 29.50 590AR-2 Providing and Fixing angle stop cock(continental-053 KN) of jaquar make Each 257 931.000 239267

9 AR-2 Providing and fixing bib cock(continental -037 KN) of jaquar make Each 331 970.000 321070

AR-2 Providing and fixing of long body bib cock (continental-107 KN) Each 143 1335.000 190905

10 AR-1 Providing and fixing shower (HSH-1937) of jaquar make 207.000 1450.000 300150

11 AR-1 Providing and fixing towel rail of jaquar make

600 mm long towel rail with total length of 645 mm, width 78

mm and effective height of 88 mm, weighing not less than 190

Each 323.000 1364.000 440572

12 DSR 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983

with C.I. brackets and stainless steel plug 40 mm including painting of fittings and

brackets, cutting and making good the walls wherever required :

DSR 17.10.1 Kitchen sink with drain board

13 DSR 17.10.1.1 510x1040 mm bowl depth 250mm Each 6 7,052.15 42312.900

17.10.1.3 510x1040 mm bowl depth 200 mm Each 185 5,966.15 1103737.750

2

14 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of

approved quality) complete with 6 mm thick hard board ground fixed to wooden

cleats with C.P. brass screws and washers complete.

Each 381 793.950 302494.950

15 17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off, supported

on anodised aluminium angle frame with C.P. brass brackets and guard rail

complete fixed with 40 mm long screws, rawl plugs etc., complete.

Each 153.000 543.800 83201.400

16 DSR 17.34 Providing and fixing toilet paper holder :

DSR 17.34.1 C.P. brass Each 91 415.90 37846.900

DSR 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden

cleats with CP brass screws with concealed fitting arrangement of approved

quality and colour.

17 DSR 17.73.2 600mm long towel rail with total length of 645mm, width 78mm and effective

height of 88mm, weighing not less than 190gms.

Each 84 541.50

45486.000

18 17.37

Providing and fixing M.S. holder-bat clamps of approved design to Sand

Cast iron/cast iron (spun) pipe embedded in and including cement

concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4

graded stone aggregate 20 mm nominal size), including cost of cutting

holes and making good the walls etc.

17.37.1 For 100 mm dia pipe 63.00 152.90 9632.700

17.37.2 For 75 mm dia pipe Each 63 150.60 9487.800

CP BRASS FITTINGS

19MR Providing and fixing wall mixer in bathroom (Code - CON-273KNUPR) with

provision for overhead shower with 155 long bend pipeon upper side,

connecting legs & wall flages.

Each

43445.00

13780

20 MRProviding and fixing C.P. brass bib cock of approved quality conforming to

IS:893115 mm nominal bore Each 4 970.00 3880

21 MRProviding and fixing C.P. brass long body bib cock of approved quality

conforming to IS standards and weighing not less than 690 gms.

3

15 mm nominal bore Each 38 1335 50730

22 MRProviding and fixing C.P. brass stop cock (concealed) of standard design

and of approved make conforming to IS:8931.15 mm nominal bore Each 4 619.75 2479

23 MRProviding and fixing C.P. brass angle valve for basin mixer and geyser

points of approved quality conforming to IS:8931 a) 15 mm nominal bore

15 mm nominal bore Each 10 507.70 5077

24MR Providing and fixing wall mixer in kitchen sink (Code - CON-309KN) with sink

mixer wiht swinging casted spout (wall mounted model) with connection legs &

wall flanges also available

Each 1 2645.00 2645

25 DSR-17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32

mm C.P. brass waste of standard pattern, including painting of fittings and

brackets, cutting and making good the walls wherever require :

26 DSR-17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P.

brass pillar taps. Each 22 2331.15 51285.3

27 18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :18.22.2 150 mm diameter 56 86.35 4835.6

28 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth

102mm, height of 75mm with concealed fitting arrangements, weighing not less

than 106 gms

Each 224 164.950

36948.8

18.48 Providing and placing having three layers with thermoconductor material on

terrace (at all floor levels) polyethylene water storage tank, with cover and

suitable locking arrangement and making necessary holes for inlet, outlet and

overflow pipes but without fittings and the base support for tank.(2 tank of

capacity 5000 each)

per

litre

154047

15.000

2310705

NON DSR Providing and fixing of 12mm Toughened develled glass with bolts and nuts

145 2840.000 411800

4

29 18.8

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply, including all CPVC plain &

brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.

This includes jointing of pipes & fittings with one step CPVC solvent

cement and the cost of cutting chases and making good the same

including testing of joints complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the walls.

18.8.1 15 mm nominal outer dia Pipes metre 1582 270 427140

18.8.2 20 mm nominal outer dia Pipes metre 1645 296.40 48757830 DSR 18.8.3 25 mm nominal outer dia Pipes Each 386 351.30 135601.831 DSR 18.8.4 32 mm nominal outer dia Pipes Each 105 422.40 4435232 DSR 18.10 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting

and making good the walls etc.

33 DSR 18.10.3 25 mm dia nominal bore Metre 155 304.15 47143.25

18.10.5 40 mm dia nominal bore metre 895 425.65 380956.7534 DSR 18.10.6 50 mm dia nominal bore Metre 293.7 527.20 154838.64

35 18.17Providing and fixing gun metal gate valve with C.I. wheel of approved

quality

(screwed end) : 18.17.1 25 mm nominal bore Each 146 428.85 62612.1

18.17.3 40 mm nominal bore Each 11 585.5 6440.5


36 18.18Providing and fixing ball valve (brass) of approved quality, High or low

pressure, with plastic floats complete :18.18.2 20 mm dia Each 18 409.90 7378.2

18.18.3 25 mm dia Each 187 449.95 84140.6537 18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply including all CPVC plain & brass threaded

fittings This includes jointing of pipes & fittings with one step CPVC solvent

cement ,trenching ,refilling & testing of joints complete as per direction of

Engineer in Charge

18.9.6 50 mm dia Pipes to Tank metre 306 524.100 160374.618.9.3 25 mm nominal outer dia Pipes metre 1811.5 209.500 379509.25

5

38 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having


brass threaded fittings, including fixing the pipe with clamps at 1.00 m

spacing. This includes jointing of pipes & fittings with one step CPVC

solvent cement and testing of joints complete as per direction of Engineer

in Charge. Exposed on wall

39 DSR 18.7.2 20 mm nominal outer dia Pipes Each 33 190.55 6288.15

18.7.3 25 mm nominal outer dia Pipes

(Taking L.S qty.) 297.00 231.30 68696.140 DSR 18.7.4 32 mm nominal outer dia Pipes Each 50 296.70 1483541 DSR 18.7.5 40 mm nominal outer dia Pipes Each 35 407.90 14276.5

18.20 Providing and fixing brass ferrule with C.I. mouth cover including boring and

tapping the main

18.20.1 15 mm nominal bore each 176 245.850 43269.6

42 MR

Providing and placing having three layers with thermoconductor material

on terrace (at all floor levels) polyethylene water storage tank, with cover

and suitable locking arrangement and making necessary holes for inlet,

outlet and overflow pipes but without fittings and the base support for

tank.(1 tank of capacity 1000 each)

litre 5000 15.00

75000

43 MR

Providing and fixing uPVC SWR class-B(IS:13592) Nahani trap of self

cleaning design complete of approved make including cost of cutting and

making good the cut-outs in walls and floors etc. Complete in all respect

as per satisfaction of the engineerin -charge

MR 75 mm inlet and 75 mm out letEach 2 148.40 296.8

44 MR

Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection

moulded fittings complete including jointing with solvent cement

including cutting and making good the walls wherever required. (For soil

& waste pipes). Nothing extra will be paid for supports.(Inside Toilets &

Kitchen)

MR 110 mm outer dia Meter 15 450 6750


6

45 MR

Providing and fixing 100% stainless steel grating of approved make and

quality grade 304 on top of floor trap. The rate includes the cost of all

ancillary works and material as required to complete the works.0

125 mm Each 2 225.00 450

46 MR

Providing and fixing in position uPVC SWR grade special /fitting of

approved make including suitable jointing to ensure leak proof service and

including cutting holes in wall ,roof ,and floors etc and making good to its

original condition as per specification and satisfaction of the engineer -in -

charge.

Coupler

110 mm Each 2 62.10 124.2

tee

110x110x110 mm Each 0 196.30 0

Bend 87.5°

110 mm bend Each 3 120.50 361.5

cowl

110 mm Each 1 27.40 27.4

47 MR Providing and placing having three layers with thermoconductor material





litre

2

10000 15.00 300000

SOIL, WASTE, VENT & RAIN WATER PIPES

48 MR Providing and fixing uPVC SWR class-B(IS:13592) Nahani trap of self




MR 75 mm inlet and 75 mm out let Each 2 20 170.00 6800

7

49 MR Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection




Kitchen)

MR 110 mm outer dia Meter 2 120 400 96000




including cutting and making good the walls wherever required. (For soil,

waste, vent & rain water pipes). Nothing extra will be paid for supports.)

For Vertical Pipes



51 MR Providing and fixing 100% stainless steel grating of approved make and


ancillary works and material as required to complete the works.

125 mm Each 2 20 225.00 9000

52 MR Providing and fixing in position uPVC SWR grade special /fitting of




charge.Coupler

110 mm Each 25 62.10 1552.5

tee

110x110x110 mm Each 15 196.30 2944.5

Bend 87.5°

110 mm bend Each 5 120.50 602.5

cowl

110 mm Each 5 27.40 137

8

53 MR

Providing and placing having three layers with thermoconductor material





litre 3000 15.00 45000

C. SOIL, WASTE, VENT & RAIN WATER PIPES

54 MR

Providing and fixing uPVC SWR class-B(IS:13592) Nahani trap of self




MR 75 mm inlet and 75 mm out let Each 10 148.40 1484

55 MR





Kitchen)



56 MR



including cutting and making good the walls wherever required. (For soil,

waste, vent & rain water pipes). Nothing extra will be paid for supports.)

For Vertical Pipes



57 MR

Providing and fixing 100% stainless steel grating of approved make and



125 mm Each 5 225.00 1125

101mm Each 5 180.00 900

9

58 MR

Providing and fixing in position uPVC SWR grade special /fitting of




charge.Coupler

110 mm Each 5 62.10 310.5

tee

110x110x110 mm Each 0 196.30

Bend 87.5°

110 mm bend Each 5 120.50 602.5

cowl

110 mm Each 5 27.40 137NON DSR Providing and fixing of 12mm Toughened develled glass with bolts and nuts

Sqm 60 2840170400

59 DSR 18.51 Providing and fixing C.P. brass long body bib cock of approved quality


DSR 18.51.1 15 mm nominal bore Each 21 610.65 12823.65

61 DSR 18.50 Providing and fixing C.P. brass bib cock of approved quality conforming to

IS:8931

62 DSR 18.50.1 15 mm nominal bore Each 5 459.50 2297.5




64 DSR 18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser


65 DSR 18.53.1 15 mm nominal bore Each 240 507.70 121848

18 507.70 9138.6

DSR 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of

approved quality) complete with 6 mm thick hard board ground fixed to wooden

cleats with C.P. brass screws and washers complete. Each 32 793.95 25406.4

10

66 18.48 Providing and placing having three layers with thermoconductor material on


suitable locking arrangement and making necessary holes for inlet, outlet and

overflow pipes but without fittings and the base support for tank.(2 tank of

capacity 5000 each)

per

litre

10000 15.000 150000.000

67 MR Supplying automatic 'NO-Touch ' SS electric hand-driers complete with all

accessories & fittings.(Make:Euronics Model:EH-02) Each 23 6500.00 14950068 MR Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and

112 mm distance from wall of standard shape with bracket of the same materials

with snap fittings of approved quality and colour, weighing not less than 105

gms.

Each 25 228.85 5721.2569 MR Providing and fixing of CP brass Health faucet with 8mm dia 1mtr. Long PVC tube

and wall hook fixed to wall with rawl plug and CP brass screws complete. (Make:

Jaquar Cat. No.ALD-CHR-583)Each 64 975.00 62400

70 MR Prividing and Fixing 1.5 feet long connecting hose with nuts at both ends

complete.(Make: Jaquar Cat.No.ALD-803B) Each 110 250.00 27500B. WATER SUPPLY INTERNAL

71 DSR 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply, including all CPVC plain & brass threaded

fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes

jointing of pipes & fittings with one step CPVC solvent cement and testing of

joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

71.1 DSR 18.7.2 20 mm nominal outer dia Pipes Each 10 190.55 1905.5

71.2 DSR 18.7.3 25 mm nominal outer dia Pipes Each 10 231.30 2313



11

72 DSR 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal


fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of

pipes & fittings with one step CPVC solvent cement and the cost of cutting chases

and making good the same including testing of joints complete as per direction of

Engineer in Charge.

Concealed work, including cutting chases and making good the walls etc.




73 DSR 18.10 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting

and making good the walls etc.

73.1 DSR 18.10.3 25 mm dia nominal bore Metre 30 304.15 9124.5

73.2 DSR 18.10.5 40 mm dia nominal bore Metre 200 425.65 85130


74 DSR 18.40 Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint

of approved quality :


74.2 DSR 18.40.5 40 mm dia nominal bore Metre 805 11.85 9539.2574.3 DSR 18.40.6 50 mm dia nominal bore Metre 100 14.15 141574 DSR 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality

(screwed end) :

74.1 DSR 18.17.1 25 mm nominal bore Each 5 428.85 2144.25

74.2 DSR 18.17.4 50 mm nominal bore Each 8 750.75 6006

75 DSR 18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure,

with plastic floats complete :

75.1 DSR 18.18.2 20 mm dia Each 5 409.90 2049.5

75.2 DSR 18.18.3 25 mm dia Each 3 449.95 1349.85


76 MR Providing and fixing uPVC class-B(IS:13592) trap of self cleaning design complete

including cost of cutting and making good the cut-outs in walls and floors etc.

complete (P or S trap).Make:Akg/Kissan/Raksha

76.1 MR 100 mm inlet and 100 mm out let Each 101 550.00 55550

12

77 MR Providing and fixing 100mm dia nominal bore uPVC pipe (Class-III) inlet fitting

approximately 400mm long above the trap with one or more 32/ 40/ 50/ 65mm

dia holes for jointing waste pipes from waste appliances jointed and sealed with

epoxy based sealant complete.(Make-Akg/Kissan/RakshaEach 101 450.00 45450

78 MR Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded

fittings complete including jointing with solvent cement including cutting and

making good the walls wherever required. (For soil & waste pipes). Nothing extra

will be paid for supports.(Inside Toilets & Kitchen)



79 MR Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded

fittings complete including jointing with solvent cement including cutting and

making good the walls wherever required. (For soil, waste, vent & rain water

pipes). Nothing extra will be paid for supports.) For Vertical Pipes



80 MR Providing and fixing uPVC Pipes complete (IS: 4985 Class-III) with uPVC pipe

fittings e.g. elbows, tees, reducers, unions, plugs, flanges etc. and clamps and

jointing with solvent cement including chase cutting and making good the walls

etc. wherever required for waste connection from W. B.Sink, floor drains

etc.(Make-Akg/Kissan/Raksha



81 MR Providing and fixing 100% stainless steel grating of approved make and quality

grade 304 on top of floor trap. The rate includes the cost of all ancillary works

and material as required to complete the works.

81.1 127mm (Cat No.-SKSH5) Each 134 225.00 30150


MR Providing and fixing uPVC CLEANOUT PLUG for cleaning

For 110 OD uPVC Pipe Each 37 400.00 14800

82.1 DSR 12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement

concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm

nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm

cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,

rounding the edges and making and finishing the outlet complete.

Each 12 186.65 2239.8

13

4 186.65 746.6

5 186.65 933.25

6 186.65 1119.9

83.1 DSR-12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron grating

15 cm diameter and weighing not less than 440 grams.

Each 27 41.10 1109.7

AR-2 Providing and fixing stop cock (concealed) of jaquar make Each 417 1215.000 506655

84 19.4 Providing and fixing square-mouth S.W. gully trap class SP-1 complet with C.I.

grating brick masonry chamber with water tight C.I. cover with frame o f 300

x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame

to be not less than 2.70 kg as per standard design

19.4.1 100x100 mm size P type

19.4.1.1 With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5

Each 123 1571.250

193263.75

TOTAL C/F SOIL/WASTE & RAIN WATER-C

D. EXTERNAL

85 DSR-19.7

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse

sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded

stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement :

4 coarse sand : 8 graded stone aggregate 40mm nominal size), inside plastering

12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with

floating coat of neat cement and making channels in cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished

with a floating coat of neat cement complete as per standard design :

DSR-19.7.1

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty)

455x610 mm internal dimensions, total weight of cover and frame to be not less

than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :

DSR-19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 104 8,507.00 88472886 19.1 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture

of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including

testing of joints etc. complete :

19.1.1 100 mm diameter Meter 503 206.55 103894.65

19.1.2 150 mm diameter metre 540 314.35 169749

14

87 19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10

graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed

concrete as per standard design :

19.2.1 100 mm diameter S.W. pipe Meter 130 592.6 77038

19.2.2 150 mm diameter S.W. pipe metre 122 724.2 88352.419.8 Extra for depth for manholes

19.8.1 Size 90x80 cm


designation 7.5

Metre 34 5638.200

191698.819.6 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars

jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2

fine sand) including testing of joints etc. complete :

metre

19.6.3 250 mm dia. R.C.C. pipe Metre 660 468.600 30927619.6.2 150 mm dia. R.C.C. pipe Metre 680 348.300 23684419.21 Making connection of drain or sewer line with existing manhole including

breaking into and making good the walls, floors with cement concrete 1:2:4 mix

(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse

sand), finished with a floating coat of neat cement and making necessary

channels for the drain etc. complete

19.21.1 For pipes 100 to 250 mm diameter Each 40 364.600 1458419.27 Constructing brick masonry road gully chamber 50x45x60 cm with bricks in

cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast

R.C.C. horizontal grating with frame complete as per standard design :

19.27.1 With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5

Each 3 5 3957.50059362.5

MR Providing 125 Ltr capacity Solar Water Heater with storage tank and all other

required equipment including the cost of instalitation

Ltr 3 125.000 250.000

93750

88 12.44Providing and fixing to the inlet mouth of rain water pipe cast iron grating

15 cm diameter and weighing not less than 440 grams.Each

49.141.1

2018.01

89 12.41

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes

conforming to IS : 13592 Type A, including jointing with seal ring

conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)

Single socketed pipes.12.41.1 75 mm diameter metre 57 145.70 8304.9

15

12.41.2 110 mm diameter metre 8.000 231.65 1853.2

90 12.42 Providing and fixing on wall face unplasticised - PVC moulded fittings/

accessories for unplasticised Rigid PVC rain water pipes conforming to IS :

13592 Type A, including jointing with seal ring conforming to IS : 5382,

leaving 10 mm gap for thermal expansion.12.42.1 Coupler

12.42.1.1 75 mm each 24 108.65 2607.6

12.42.4 Single tee without door

12.42.4.1 75x75x75 mm each 40 195.30 7812

12.42.6 Shoe (Plain)

12.42.6.1 75 mm Shoe each 12 167.85 2014.2

12.42.1.2 110 mm each 12 138.30 1659.6

12.42.6.2 110 mm Shoe each 4 295.10 1180.4

91 17.60 Providing and fixing trap of self cleansing design with screwed down or hinged

grating with or without vent arm complete, including cost of cutting and making

good the walls and floors

17.60.2.1 Sand cast iron S&S as per IS: 3989 690 1020.900 704421

92 17.35 Providing and fixing soil, waste and vent pipes

17.35.1 100mm diameter pipe metre 1276 859.000 1096084

93 17.35.2 75mm diameter pipe

17.35.2.1 Sand cast iron S&S pipe as per IS: 1729 2066 709.100 1465000.6

17.39.1 100 mm dia

17.39.1.1 Sand cast iron S&S as per IS - 1729 Each 158 434.500 68651

17.39.2 75 mm dia 64.000 434.500 27808

17.39.2.1 Sand cast iron S&S as per IS - 1729 Each 185 219.750 40653.75

94 17.40 Providing and fixing heel rest sanitary bend 160.000 219.750 35160

17.40.1 100 mm dia


17.40.2 75 mm dia 149 318.350 47434.15


17.44 Providing and fixing single equal plain junction of required degree

17.44.1 100x100x100 mm



17.56 Providing and fixing terminal guard

17.56.1 100 mm

16


17.56.2 75 mm

17.56.2.1 Sand cast iron S&S as per IS - 1729 Each 97 197.000 19109

17.57 Providing and fixing collar

17.57.1 100 mm


17.57.2 75 mm


17.58 Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes

and fittings of diameter

17.58.2 75 mm Each 404 205.300 82941.2

17.58.1 100 mm Each 208.000 243.750 50700

17.59 Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast

(spun) iron pipes of diameter

17.59.2 75 mm Each 872.000 57.150 49834.8

17.59.1 100 mm Each 678.000 68.600 46510.8

TOTAL 16114899 4755537

Grand Total 20870435

17

S. No.DSR 2014

No.Item Unit No. L B H Quantity Rate Amount

Sanitary installation

1 17.1

Providing and fixing water closet squatting pan (Indian

type W.C. pan ) with 100 mm sand cast Iron P or S trap,

10 litre low level white P.V.C. flushing cistern, including

flush pipe, with manually controlled device (handle

lever) conforming to IS : 7231, with all fittings and

fixtures complete, including cutting and making good the

walls and floors wherever required.

17.1.1White Vitreous china Orissa pattern W.C. pan of size

580x440

mm with integral type foot rests

Each 12 3392.8 40713.6

1 17.2 Providing and fixing white vitreous china pedestal type water

closet

(European type W.C. pan) with seat and lid, 10 litre low level

white P.V.C. flushing cistern, including flush pipe, with manually

controlled device (handle lever), conforming to IS : 7231, with

all fittings and fixtures complete, including cutting and making

good the walls and floors wherever

17.2.1 W.C. pan with ISI marked white solid plastic seat and lid Each

GF Each 3 3.000

1st 2nd 3rd floor Each 6 6.000

9.000 3317.300 29855.700

Detailed Estimate for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P) (BARRACKS )

ANNEX-4A Sanitary installation and Drainage

Total

17.5 Providing and fixing white vitreous china flat back half stall

urinal of size 580x380x350 mm with white PVC automatic

flushing cistern, with fittings, standard size C.P. brass flush pipe,

spreaders with unions and clamps (all in C.P. brass) with waste

fitting as per IS : 2556, C.I. trap with outlet grating and other

couplings in C.P. brass, including painting of fittings and cutting

and making good the walls and floors wherever required

Each


cistern

24 24.000 6591.100 158186.400

2 17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P.

brass pillar taps, 32 mm C.P. brass waste of standard pattern,

including painting of fittings and brackets, cutting and making

good the walls wherever require:

17.7.4 White Vitreous China Flat back wash basin size 550x 400 mm


Each

GF Each 3 3.000


27.000 1807.10 48791.700

AR-2 Providing and Fixing angle stop cock(continental-053 KN) of

jaquar make

Each 27 27.000 931.00 25137.000

3 AR-2 Providing and fixing bib cock(continental -037 KN) of jaquar

make

Each

GF Each 3 3.000


9.000 970.000 8730.000

AR-2 Providing and fixing of long body bib cock (continental-107 KN) Each 21 21.000 1335.000 28035.000

4 AR-1 Providing and fixing shower (HSH-1937) of jaquar make

Each 21 21.000 1450.000 30450.000

Total

Total




Each

GF Each 3 3.000


33.000 1364.000 45012.000

6 17.31 Providing and fixing 600x450 mm beveled edge mirror of

superior glass (of approved quality) complete with 6 mm thick

hard board ground fixed to wooden cleats with C.P. brass

screws and washers complete.

Each 27 27.000 793.950 21436.650

7 17.33 Providing and fixing 600x120x5 mm glass shelf with edges

round off, supported on anodised aluminium angle frame with

C.P. brass brackets and guard rail complete fixed with 40 mm

long screws, rawl plugs etc., complete.

Each

GF Each 3 3.000

3.000 543.800 1631.400

8 18.65 Providing and fixing PTMT soap Dish Holder having length of

138mm, breadth 102mm, height of 75mm with concealed

fitting arrangements, weighing not less than 106 gms

Each 3 3.000 164.950 494.850

9 18.48 Providing and placing having three layers with

thermoconductor material on terrace (at all floor levels)

polyethylene water storage tank, with cover and suitable

locking arrangement and making necessary holes for inlet,

outlet and overflow pipes but without fittings and the base

support for tank.(2 tank of capacity 5000 each)

per

litre

10000 10000.000 15.000 150000.000

Water Supply External Work

Total

Total

10 18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply

including all CPVC plain & brass threaded fittings This includes

jointing of pipes & fittings with one step CPVC solvent cement

,trenching ,refilling & testing of joints complete as per direction

of Engineer in Charge

18.9.6 50 mm dia Pipes to Tank metre

Horizontal 1 16.000 16.000

For water tank vertical 1 18.000 18.000

34.000 524.10 17819.400

18.9.3 25 mm nominal outer dia Pipes metre

1 183.000 183.000

183.000 209.500 38338.500

11 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings, i/c fixing the

pipe with clamps at 1.00 m spacing. This includes jointing of

pipes & fittings with one step CPVC solvent cement and the

cost of cutting chases and making good the same including

testing of joints complete as per direction of Engineer in

Charge.

metre


1 122.000 122.000

122.000 270.000 32940.000

18.17 Providing and fixing gun metal gate valve with C.I. wheel of

approved quality (screwed end) :

18.17.1 25 mm nominal bore each 12 12 428.850 5146.200

18.17.4 50 mm nominal bore each 2 2.000 750.750 1501.500

18.18 Providing and fixing ball valve (brass) of approved quality, High

or low pressure, with plastic floats complete

Total

Total

Total

18.18.3 25 mm nominal bore 12 12.000 449.950 5399.400

18.20 Providing and fixing brass ferrule with C.I. mouth cover

including boring and tapping the main

each

18.20.1 15 mm nominal bore 4 4.000 245.850 983.400

AR-2 Providing and fixing stop cock (concealed) of jaquar make Each 27 27.000 1215.000 32805.000

30 19.4 Providing and fixing square-mouth S.W. gully trap class SP-1

complet with C.I. grating brick masonry chamber with water

tight C.I. cover with frame o f 300 x300 mm size (inside) the

weight of cover to be not less than 4.50 kg and frame to be not

less than 2.70 kg as per standard design



designation 7.5

Each 7 7.000 1571.250 10998.750

25 17.60 Providing and fixing trap of self cleansing design with screwed

down or hinged grating with or without vent arm complete,

including cost of cutting and making good the walls and floors

17.60.2.1 Sand cast iron S&S as per IS: 3989

Each 70 70.000

70.000 1020.900 71463.000

17 17.35 Providing and fixing soil, waste and vent pipes metre

17.35.1 100mm diameter pipe

Vertical 112 112.000

Horizontal 35 35.000

147.000 859.000 126273.000

Total

Total

19 17.35.2 75mm diameter pipe

17.35.2.1 Sand cast iron S&S pipe as per IS: 1729

Vertical 80 80.000


112.000 709.100 79419.200

20 17.39 Providing and fixing plain bend of required degree Each

17.39.1 100 mm dia

17.39.1.1 Sand cast iron S&S as per IS - 1729 Each 18 18.000 434.500 7821.000

17.39.2 75 mm dia


21 17.40 Providing and fixing heel rest sanitary bend

17.40.1 100 mm dia


17.40.2 75 mm dia


17.44 Providing and fixing single equal plain junction of required

degree

17.44.1 100x100x100 mm




17.56.1 100 mm


17.56.2 75 mm



17.57.1 100 mm


17.57.2 75 mm


17.58 Providing lead caulked joints to sand cast iron/centrifugally cast

(spun) iron pipes and fittings of diameter

Total

17.58.2 75 mm Each 60 60.000 205.300 12318.000

17.58.1 100 mm Each 32 32.000 243.750 7800.000

17.59 Providing and fixing M.S. stays and clamps for sand cast iron/

centrifugally cast (spun) iron pipes of diameter

17.59.2 75 mm Each 80 80.000 57.150 4572.000

17.59.1 100 mm Each 112 112.000 68.600 7683.200

18.10 Providing and fixing G.I. pipes complete with G.I. fittings and

clamps, i/c cutting and making good the walls etc.

18.10.6 50 mm dia nominal bore Metre 1 16.500 16.500

16.500 527.200 8698.800

19.7 Constructing brick masonry manhole in cement mortar 1:4 ( 1

cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1

cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size), foundation concrete 1:4:8 mix (1 cement : 4

coarse sand : 8 graded stone aggregate 40 mm nominal size),

inside plastering 12 mm thick with cement mortar 1:3 (1

cement : 3 coarse sand) finished with floating coat of neat

cement and making channels in cement concrete 1:2:4 (1

cement : 2 coarse sand : 4

19.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with

frame (light duty) 455x610 mm internal dimensions, total

weight

of cover and frame to be not less than 38 kg (weight of cover

23

kg and weight of frame 15 kg) :


designation 7.5

Each 6 6.000

6.000 8507.000 51042.000

19.8 Extra for depth for manholes

Total

Total

19.8.1 Size 90x80 cm


designation 7.5

Metre 2.000 2.000 5638.200 11276.400

19.6 Providing and laying non-pressure NP2 class (light duty) R.C.C.

pipes with collars jointed with stiff mixture of cement mortar in

the proportion of 1:2 (1 cement : 2 fine sand) including testing

of joints etc. complete :

metre

19.6.3 250 mm dia. R.C.C. pipe Metre 2 30.000 60.000

60.000 468.600 28116.000

19.6.2 150 mm dia. R.C.C. pipe Metre 1 20.000 20.000 348.300 6966.000

19.21 Making connection of drain or sewer line with existing manhole

including breaking into and making good the walls, floors with

cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded

stone aggregate 20 mm nominal size) cement plastered on

both sides with cement mortar 1:3 (1 cement : 3 coarse sand),

finished with a floating coat of neat cement and making

necessary channels for the drain etc. complete

19.21.1 For pipes 100 to 250 mm diameter Each 2 2.000 364.600 729.200

19.27 Constructing brick masonry road gully chamber 50x45x60 cm

with bricks in cement mortar 1:4 (1 cement : 4 coarse sand)

including 500x450 mm pre-cast R.C.C. horizontal grating with

frame complete as per standard design :

19.27.1 With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5

Each 5 5.000 3957.500 19787.500

MR Providing 125 Ltr capacity Solar Water Heater with storage

tank and all other required equipment including the cost of

instalitation

Ltr 1 125.000 250.000 31250.000

Total

For One Block 1249215

For 3 Blocks of Barracks = (1244992 x 3 = 3734977) 3747645

Total=

Grand Total=

S.NO. (DSR-14) DESCRIPTION UNIT QTY. RATE AMOUNT AMOUNT

A. SANITARY INSTALLATIONS

1 DSR-17.3 Providing and fixing white vitreous china pedestal type water closet

(European type) with seat and lid, 10 litre low level white vitreous china

flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40mm flush

bend, overflow arrangement with specials of standard make and mosquito

proof coupling of approved municipal design complete including painting of

fittings and brackets, cutting and making good the walls and floors wherever

required :

DSR-17.3.1 W.C. pan with ISI marked white solid plastic seat and lid.

Each 11 4784.60 52630.6

2 DSR-17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar

taps,32 mm C.P. brass waste of standard pattern, including painting of

fittings and brackets, cutting and making good the walls wherever require :

2.1 DSR-17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm

C.P. brass pillar taps.

Each 10 2331.15 23311.5

3 DSR 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS

13983 with C.I. brackets and stainless steel plug 40 mm including painting of

fittings and brackets, cutting and making good the walls wherever required :


3.1 DSR 17.10.1.1 510x1040 mm bowl depth 250mm

Each 2 7,052.15 14104.3

4 17.5 Providing and fixing white vitreous china flat back half stall urinal of size

580x380x350 mm with white PVC automatic flushing cistern, with fittings,

standard size C.P. brass flush pipe, spreaders with unions and clamps (all in

C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating

and other couplings in C.P. brass, including painting of fittings and cutting

and making good the walls and floors wherever required

2 6591.100 13182.2


cistern EachNON DSR Providing and fixing of 12mm Toughened develled glass with bolts and nuts

Sqm 60 2840.000 170400






6.1 DSR 18.53.1 15 mm nominal boreEach 110 507.70 55847

Detailed Estimate for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)BILL OF QUANTITY-PLUMBING .GO's MESS ITBP BASE CAMP


7.1 DSR 17.34.1 C.P. brass Each 11 415.90 4574.9

8 DSR 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of

approved quality) complete with 6 mm thick hard board ground fixed to

wooden cleats with C.P. brass screws and washers complete.

Each 12 793.95 9527.4

9 DSR 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden

cleats with CP brass screws with concealed fitting arrangement of approved

quality and colour.

9.1 DSR 17.73.2 600mm long towel rail with total length of 645mm, width 78mm and

effective height of 88mm, weighing not less than 190gms.Each 11 541.50 5956.5

10 DSR 18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :

10.1 DSR 18.22.2 150 mm diameter Each 9 86.35 777.15

11 DSR 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm,

breadth 102mm, height of 75mm with concealed fitting arrangements.

Weighing not less than 106 gms.Each 9 164.95 1484.55

11 18.48 Providing and placing having three layers with thermoconductor material on


suitable locking arrangement and making necessary holes for inlet, outlet

and overflow pipes but without fittings and the base support for tank.(2

tanks of capacity 5000 each)

per

litre

10000 15.000 150000.000

12 MR Supplying automatic 'NO-Touch ' SS electric hand-driers complete with all

accessories & fittings.(Make:Euronics Model:EH-02)

Each 0 6500.00 0

13 MR Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high

and 112 mm distance from wall of standard shape with bracket of the same

materials with snap fittings of approved quality and colour, weighing not less

than 105 gms.Each 2 228.85 457.7

14 MR Providing and fixing of CP brass Health faucet with 8mm dia 1mtr. Long PVC

tube and wall hook fixed to wall with rawl plug and CP brass screws

complete. (Make: Jaquar Cat. No.ALD-CHR-583) Each 11 975.00 10725


complete.(Make: Jaquar Cat.No.ALD-803B) Each 11 250.00 2750

B. WATER SUPPLY INTERNAL

1 DSR 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having


brass threaded fittings, including fixing the pipe with clamps at 1.00 m

spacing. This includes jointing of pipes & fittings with one step CPVC solvent

cement and testing of joints complete as per direction of Engineer in Charge.






2 DSR 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having


brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.

This includes jointing of pipes & fittings with one step CPVC solvent cement

and the cost of cutting chases and making good the same including testing of

joints complete as per direction of Engineer in Charge.





3 DSR 18.10 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c

cutting and making good the walls etc.




4 DSR 18.40 Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic

paint of approved quality :




4 DSR 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality

(screwed end) :



5 DSR 18.18 Providing and fixing ball valve (brass) of approved quality, High or low

pressure, with plastic floats complete :

5.1 DSR 18.18.2 20 mm dia Each 5 409.90 2049.5

5.2 DSR 18.18.3 25 mm dia Each 3 449.95 1349.85


1 MR Providing and fixing uPVC class-B(IS:13592) trap of self cleaning design

complete including cost of cutting and making good the cut-outs in walls and

floors etc. complete (P or S trap).Make:Akg/Kissan/Raksha


2 MR Providing and fixing 100mm dia nominal bore uPVC pipe (Class-III) inlet

fitting approximately 400mm long above the trap with one or more 32/ 40/

50/ 65mm dia holes for jointing waste pipes from waste appliances jointed

and sealed with epoxy based sealant complete.(Make-Akg/Kissan/Raksha

Each 30 450.00 13500


moulded fittings complete including jointing with solvent cement including

cutting and making good the walls wherever required. (For soil & waste

pipes). Nothing extra will be paid for supports.(Inside Toilets & Kitchen)




moulded fittings complete including jointing with solvent cement including

cutting and making good the walls wherever required. (For soil, waste, vent

& rain water pipes). Nothing extra will be paid for supports.) For Vertical

Pipes



5 MR Providing and fixing uPVC Pipes complete (IS: 4985 Class-III) with uPVC pipe

fittings e.g. elbows, tees, reducers, unions, plugs, flanges etc. and clamps

and jointing with solvent cement including chase cutting and making good

the walls etc. wherever required for waste connection from W. B.Sink, floor

drains etc.(Make-Akg/Kissan/Raksha



6 MR Providing and fixing 100% stainless steel grating of approved make and




7 MR Providing and fixing uPVC CLEANOUT PLUG for cleaning

For 110 OD uPVC Pipe

Each 5 400.00 2000

8 DSR 12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement

concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20

mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12

mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat

cement, rounding the edges and making and finishing the outlet complete.

Each 4 186.65 746.6

9 DSR-12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron grating

15 cm diameter and weighing not less than 440 grams.

Each 4 41.10 164.4


D. EXTERNAL

1 DSR-19.7

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4

coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand :

4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8

mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal

size), inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3

coarse sand) finished with floating coat of neat cement and making channels

in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 20mm nominal size) finished with a floating coat of neat cement

complete as per standard design :

DSR-19.7.1

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light

duty) 455x610 mm internal dimensions, total weight of cover and frame to

be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :

DSR-19.7.1.1

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 5 8,507.00 42535

2 DSR-19.4

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with

C.I. grating brick masonry chamber with water tight C.I. cover with frame of

300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg

and frame to be not less than 2.70 kg as per standard design :

DSR-19.4.1 100x100 mm size P type.

DSR-19.4.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 6 1571.25 9427.5

3 19.1 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff

mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand)

including testing of joints etc. complete :


4 19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10

graded stone aggregate 40 mm nominal size) all-round S.W. pipes including

bed concrete as per standard design :

19.2.1 100 mm diameter S.W. pipe Meter 14 592.6 8296.4

Total 678404 425033

Grand Total 1103437

S.NO. (DSR-14) DESCRIPTION UNIT QTY. RATE DSR NON DSR


1 DSR-17.3 Providing and fixing white vitreous china pedestal type water closet (European type) with

seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with

fittings & C.I.brackets, 40mm flush bend, overflow arrangement with specials of

standard make and mosquito proof coupling of approved municipal design complete

including painting of fittings and brackets, cutting and making good the walls and floors

wherever required :

DSR-17.3.1 W.C. pan with ISI marked white solid plastic seat and lid. Each 15 4784.60 71769

2 DSR-17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm

C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting

and making good the walls wherever require :

2.1 DSR-17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass

pillar taps. Each 18 2331.15 41960.7

3 DSR 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I.

brackets and stainless steel plug 40 mm including painting of fittings and brackets,

cutting and making good the walls wherever required :


3.1 DSR 17.10.1.1 510x1040 mm bowl depth 250mm Each 1 7,052.15 7052.15

4 17.5 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350

mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass

flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS

: 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting

of fittings and cutting and making good the walls and floors wherever required

Each 3 6591.100 19773.3


cisternNON DSR Providing and fixing of 12mm Toughened develled glass with bolts and nuts Sqm 60 2840.000 170400

5 DSR 18.51 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS

standards and weighing not less than 690 gms.






7.1 DSR 17.34.1 C.P. brass Each 15 415.90 6238.5

8 DSR 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved

quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P.

brass screws and washers complete. Each 18 793.95 14291.1

9 DSR 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with

CP brass screws with concealed fitting arrangement of approved quality and colour.

9.1 DSR 17.73.2 600mm long towel rail with total length of 645mm, width 78mm and effective height of

88mm, weighing not less than 190gms. Each 15 541.50 8122.5



Detailed Estimate for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P)BILL OF QUANTITY-PLUMBING SOS MESS ITBP BASE CAMP

11 DSR 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm,

height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms.

Each 13 164.95 2144.35

12 MR Supplying automatic 'NO-Touch ' SS electric hand-driers complete with all accessories &

fittings.(Make:Euronics Model:EH-02) Each 0 6500.00 0

13 MR Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112

mm distance from wall of standard shape with bracket of the same materials with snap

fittings of approved quality and colour, weighing not less than 105 gms.

Each 0 228.85 0

14 MR Providing and fixing of CP brass Health faucet with 8mm dia 1mtr. Long PVC tube and

wall hook fixed to wall with rawl plug and CP brass screws complete. (Make: Jaquar Cat.

No.ALD-CHR-583) Each 15 975.00 14625


complete.(Make: Jaquar Cat.No.ALD-803B) Each 18 250.00 4500

16 MR Providing and placing having three layers with thermoconductor material on terrace (at

all floor levels) polyethylene water storage tank, with cover and suitable locking

arrangement and making necessary holes for inlet, outlet and overflow pipes but

without fittings and the base support for tank.(2 tank of capacity 5000 each)

litre 10000 15.00 150000

TOTAL C/F SANITARY-A 194436.4


1 DSR 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability

for hot & cold water supply, including all CPVC plain & brass threaded fittings, including

fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings

with one step CPVC solvent cement and testing of joints complete as per direction of

Engineer in Charge.







for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing

the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one

step CPVC solvent cement and the cost of cutting chases and making good the same






3 DSR 18.10 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and

making good the walls etc.




4 DSR 18.40 Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of

approved quality :





(screwed end) :



5 DSR 18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with

plastic floats complete :

5.1 DSR 18.18.2 20 mm dia Each 5 409.90 2049.5

5.2 DSR 18.18.3 25 mm dia Each 3 449.95 1349.85

TOTAL C/F WATER SUPPLY-B 269812.35


1 MR Providing and fixing uPVC class-B(IS:13592) trap of self cleaning design complete

including cost of cutting and making good the cut-outs in walls and floors etc. complete

(P or S trap).Make:Akg/Kissan/Raksha



approximately 400mm long above the trap with one or more 32/ 40/ 50/ 65mm dia

holes for jointing waste pipes from waste appliances jointed and sealed with epoxy

based sealant complete.(Make-Akg/Kissan/Raksha Each 25 450.00 11250

3 MR Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded fittings

complete including jointing with solvent cement including cutting and making good the

walls wherever required. (For soil & waste pipes). Nothing extra will be paid for

supports.(Inside Toilets & Kitchen)





walls wherever required. (For soil, waste, vent & rain water pipes). Nothing extra will be

paid for supports.) For Vertical Pipes



5 MR Providing and fixing uPVC Pipes complete (IS: 4985 Class-III) with uPVC pipe fittings e.g.

elbows, tees, reducers, unions, plugs, flanges etc. and clamps and jointing with solvent

cement including chase cutting and making good the walls etc. wherever required for

waste connection from W. B.Sink, floor drains etc.(Make-Akg/Kissan/Raksha



6 MR Providing and fixing 100% stainless steel grating of approved make and quality grade

304 on top of floor trap. The rate includes the cost of all ancillary works and material as

required to complete the works.




8 DSR 12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over

P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement :

3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing

the outlet complete. Each 5 186.65 933.25


15 cm diameter and weighing not less than 440 grams. Each 5 41.10 205.5


D. EXTERNAL

1 DSR-19.7

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand )

with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate

20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8

graded stone aggregate 40mm nominal size), inside plastering 12mm thick with cement

mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and

making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 20mm nominal size) finished with a floating coat of neat cement complete as

per standard design :

DSR-19.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty)

455x610 mm internal dimensions, total weight of cover and frame to be not less than 38

kg (weight of cover 23 kg and weight of frame 15 kg) :

DSR-19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 5 8,507.00 42535

2 DSR-19.4 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating

brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size

(inside) the weight of cover to be not less than 4.50 kg and frame to be not less than

2.70 kg as per standard design :



3 19.1 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of

cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints

etc. complete :


4 19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone

aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per

standard design :

19.2.1 100 mm diameter S.W. pipe Meter 14 592.6 8296.4

TOTAL C/F SOIL/WASTE & RAIN WATER-C 64289

Total A+B+C 528538 571225

Grand Total 1099763

S.NO. DSR NO. DESCRIPTION UNIT QTY. RATE


1 17.3

Providing and fixing white vitreous china pedestal type water closet (European type)

with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush

bend with fittings & C.I.brackets, 40mm flush bend, overflow arrangement with

specials of standard make and mosquito proof coupling of approved municipal design

complete including painting of fittings and brackets, cutting and making good the walls

and floors wherever required :

17.3.1 W.C. pan with ISI marked white solid plastic seat and lid. Each 1 4784.60 4784.6

2 17.7

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm

C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting

and making good the walls wherever require :

17.7.3White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass

pillar tapsEach 2 2127.90 4255.8

3 17.28Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste

fittings complete.

17.28.2 Flexible pipe

17.28.2.2 40 mm dia Each 2 76.75 153.5

4 17.8 Providing and fixing white vitreous china battery based infrared sensor operated urinal of

approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml

consumption), having water inlet from back side, including fixing to wall with suitable

brackets all as per manufacturers specification and direction of Engineer-in-charge.

Each 1 16724.95 16724.95

Detailed Estimate for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P) BILL OF QUANTITY-PLUMBING BIIN TYPE MAGAZINE ITBP BASE CAMP

AMOUNT

5 17.29 Providing and fixing 100 mm sand cast Iron grating for gully trap. Each 1 29.50 29.5

6 17.31

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved


brass screws and washers complete.

Each 2 793.95 1587.9

7 17.34 Providing and fixing toilet paper holder :

17.34.1 C.P. brass Each 1 415.90 415.9

8 17.37

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast

iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of

1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size),

including cost of cutting holes and making good the walls etc.



9 17.73

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats

with CP brass screws with concealed fitting arrangement of approved quality and

colour.

17.73.2600mm long towel rail with total length of 645mm, width 78mm and effective height of

88mm, weighing not less than 190gms.Each 2 541.50 1083

CP BRASS FITTINGS

10

MR Providing and fixing wall mixer in bathroom (Code - CON-273KNUPR) with provision for

overhead shower with 155 long bend pipeon upper side, connecting legs & wall flages. Each 1 3445.00 3445

11 MR Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931


12 MRProviding and fixing C.P. brass long body bib cock of approved quality conforming to

IS standards and weighing not less than 690 gms.


13 MRProviding and fixing C.P. brass stop cock (concealed) of standard design and of

approved make conforming to IS:8931.

15 mm nominal bore Each 1 619.75 619.75

14 MRProviding and fixing C.P. brass angle valve for basin mixer and geyser points of

approved quality conforming to IS:8931 a) 15 mm nominal bore


15 18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :

18.22.2 150 mm diameter Each 1 86.35 86.35

16 18.65

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth

102mm, height of 75mm with concealed fitting arrangements. Weighing not less than

106 gms.

Each 1 164.95 164.95

17 18.8

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal


fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of

pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and

making good the same including testing of joints complete as per direction of Engineer

in Charge. Concealed work, including cutting chases and making good the walls.

18.8.1 15 mm nominal outer dia Pipes metre 15 270.00 4050


18 18.10Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/ccutting and

making good the walls etc. Internal work - Exposed on wall

18.10.3 25 mm dia nominal bore (Taking LS Qty.) metre 20 304.15 6083

18.10.4 32 mm dia nominal bore metre 343.20 0

18.10.5 40 mm dia nominal bore metre 15 425.65 6384.75

19 18.17Providing and fixing gun metal gate valve with C.I. wheel of approved quality

(screwed end) :


18.17.2 32 mm nominal bore Each 0 501.5 0



20 18.18Providing and fixing ball valve (brass) of approved quality, High or low pressure, with


18.18.2 20 mm dia Each 409.90 0

18.18.3 25 mm dia Each 1 449.95 449.95

21 MR

Providing and placing having three layers with thermoconductor material on terrace (at

all floor levels) polyethylene water storage tank, with cover and suitable locking

arrangement and making necessary holes for inlet, outlet and overflow pipes but

without fittings and the base support for tank.(1 tank of capacity 1000 each)

litre 5000 15.00 75000


22 MR

Providing and fixing uPVC SWR class-B(IS:13592) Nahani trap of self cleaning design

complete of approved make including cost of cutting and making good the cut-outs in

walls and floors etc. Complete in all respect as per satisfaction of the engineerin -

charge

MR 75 mm inlet and 75 mm out let Each 2 148.40 296.8

23 MR

Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded

fittings complete including jointing with solvent cement including cutting and making

good the walls wherever required. (For soil & waste pipes). Nothing extra will be paid

for supports.(Inside Toilets & Kitchen)



24 MR

Providing and fixing 100% stainless steel grating of approved make and quality grade

304 on top of floor trap. The rate includes the cost of all ancillary works and material as


125 mm Each 2 225.00 450

25 MR

Providing and fixing in position uPVC SWR grade special /fitting of approved make

including suitable jointing to ensure leak proof service and including cutting holes in

wall ,roof ,and floors etc and making good to its original condition as per specification

and satisfaction of the engineer -in -charge.

Coupler

110 mm Each 2 62.10 124.2

tee

110x110x110 mm Each 0 196.30 0

Bend 87.5°

110 mm bend Each 3 120.50 361.5

cowl

110 mm Each 1 27.40 27.4

26 12.44Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm

diameter and weighing not less than 440 grams.Each 1 41.10 41.1

27 12.41

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming

to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving

10 mm gap for thermal expansion, (i) Single socketed pipes.

12.41.1 75 mm diameter metre 5 145.70 728.5

28 12.42

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for

unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including

jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal

expansion.

12.42.1 Coupler

12.42.1.1 75 mm each 2 108.65 217.3

12.42.1.2 110 mm each 2 138.30 276.6


12.42.4.1 75x75x75 mm each 5 195.30 976.5


12.42.6.1 75 mm Shoe each 2 167.85 335.7

12.42.6.2 110 mm Shoe each 1 295.10 295.1

D. EXTERNAL

29 19.7

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand )

with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse

sand : 8 graded stone aggregate 40mm nominal size), inside plastering 12mm thick

with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat

cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4

graded stone aggregate 20mm nominal size) finished with a floating coat of neat

cement complete as per standard design :

19.7.1

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty)

455x610 mm internal dimensions, total weight of cover and frame to be not less than

38 kg (weight of cover 23 kg and weight of frame 15 kg) :

19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 1 8,507.00 8507

30 19.4

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I.

grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm

size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less

than 2.70 kg as per standard design :

19.4.1 100x100 mm size P type.

19.4.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 1 1571.25 1571.25

31 19.1

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of

cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of

joints etc. complete :



71906 97730

Grand Total 169636

Total

S.NO.

(DSR-14)DESCRIPTION UNIT QTY.

RATE

DSR

AMOUNT

NON DSR

AMOUNT


1 DSR-17.3 Providing and fixing white vitreous china pedestal type water closet (European type) with


fittings & C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard

make and mosquito proof coupling of approved municipal design complete including

painting of fittings and brackets, cutting and making good the walls and floors wherever

required :

DSR-17.3.1 W.C. pan with ISI marked white solid plastic seat and lid. Each 21 4784.60 100476.6

2 DSR-17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P.

brass waste of standard pattern, including painting of fittings and brackets, cutting and

making good the walls wherever require :

2.1 DSR-17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar

taps. Each 22 2331.15 51285.3

3 DSR 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I.

brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting

and making good the walls wherever required :


3.1 DSR 17.10.1.1 510x1040 mm bowl depth 250mm Each 1 7,052.15 7052.15

4 17.5 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm

with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe,

spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I.

trap with outlet grating and other couplings in C.P. brass, including painting of fittings and

cutting and making good the walls and floors wherever required

Each 6 6591.100 39546.6


cistern

NON DSR Providing and fixing of 12mm Toughened develled glass with bolts and nuts Sqm 100 2840.000 284000

5 DSR 18.50 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931


6 DSR 18.51 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS







ANNEX-2E BILL OF QUANTITY-PLUMBING MI HOSPITAL ITBP BASE CAMP

1


8.1 DSR 17.34.1 C.P. brass Each 21 415.90 8733.9

9 DSR 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved


brass screws and washers complete. Each 20 793.95 15879

10 DSR 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with

CP brass screws with concealed fitting arrangement of approved quality and colour.

10.1 DSR 17.73.2 600mm long towel rail with total length of 645mm, width 78mm and effective height of

88mm, weighing not less than 190gms. Each 29 541.50 15703.5



12 DSR 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm,

height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms.

Each 21 164.95 3463.95

13 18.48 Providing and placing having three layers with thermoconductor material on terrace (at all

floor levels) polyethylene water storage tank, with cover and suitable locking

arrangement and making necessary holes for inlet, outlet and overflow pipes but without

fittings and the base support for tank.(2 tank of capacity 5000 each)

per

litre

10000 15.000 150000.000

14 MR Supplying automatic 'NO-Touch ' SS electric hand-driers complete with all accessories &

fittings.(Make:Euronics Model:EH-02) Each 0 6500.00 0

15 MR Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm

distance from wall of standard shape with bracket of the same materials with snap fittings

of approved quality and colour, weighing not less than 105 gms.

Each 0 228.85 0

16 MR Providing and fixing of CP brass Health faucet with 8mm dia 1mtr. Long PVC tube and wall

hook fixed to wall with rawl plug and CP brass screws complete. (Make: Jaquar Cat.

No.ALD-CHR-583) Each 21 975.00 20475

17 MR Prividing and Fixing 1.5 feet long connecting hose with nuts at both ends complete.(Make:

Jaquar Cat.No.ALD-803B) Each 42 250.00 10500




fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with

one step CPVC solvent cement and testing of joints complete as per direction of Engineer

in Charge.






2


for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing

the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one

step CPVC solvent cement and the cost of cutting chases and making good the same






3 DSR 18.10 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and

making good the walls etc.




4 DSR 18.40 Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of

approved quality :





(screwed end) :



6 DSR 18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with


6.1 DSR 18.18.2 20 mm dia Each 8 409.90 3279.2

6.2 DSR 18.18.3 25 mm dia Each 2 449.95 899.9


1 MR Providing and fixing uPVC class-B(IS:13592) trap of self cleaning design complete including

cost of cutting and making good the cut-outs in walls and floors etc. complete (P or S

trap).Make:Akg/Kissan/Raksha


3


approximately 400mm long above the trap with one or more 32/ 40/ 50/ 65mm dia holes

for jointing waste pipes from waste appliances jointed and sealed with epoxy based

sealant complete.(Make-Akg/Kissan/Raksha Each 21 450.00 9450



walls wherever required. (For soil & waste pipes). Nothing extra will be paid for

supports.(Inside Toilets & Kitchen)





walls wherever required. (For soil, waste, vent & rain water pipes). Nothing extra will be

paid for supports.) For Vertical Pipes



5 MR Providing and fixing uPVC Pipes complete (IS: 4985 Class-III) with uPVC pipe fittings e.g.

elbows, tees, reducers, unions, plugs, flanges etc. and clamps and jointing with solvent

cement including chase cutting and making good the walls etc. wherever required for

waste connection from W. B.Sink, floor drains etc.(Make-Akg/Kissan/Raksha



6 MR Providing and fixing 100% stainless steel grating of approved make and quality grade 304

on top of floor trap. The rate includes the cost of all ancillary works and material as






8 DSR 12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4

(1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C.

sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse

sand) and a coat of neat cement, rounding the edges and making and finishing the outlet

complete. Each 6 186.65 1119.9


15 cm diameter and weighing not less than 440 grams. Each 6 41.10 246.6


D. EXTERNAL

4

1 DSR-19.7Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand )

with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate

20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded

stone aggregate 40mm nominal size), inside plastering 12mm thick with cement mortar

1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making

channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate

20mm nominal size) finished with a floating coat of neat cement complete as per standard

design :

DSR-19.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610

mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight

of cover 23 kg and weight of frame 15 kg) :

DSR-19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 10 8,507.00 85070

2 DSR-19.4 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating

brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size

(inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70

kg as per standard design :



3 19.1 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of

cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints

etc. complete :


4 19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone

aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per

standard design :

19.2.1 100 mm diameter S.W. pipe Meter 30 592.6 17778

TOTAL C/F SOIL/WASTE & RAIN WATER-C 775140.7 501475

Grand Total 1276616

5

S. No.DSR 2014

No.Item Unit No. L B H Quantity Rate Amount



(European type W.C. pan) with seat and lid, 10 litre low level white

P.V.C. flushing cistern, including flush pipe, with manually controlled

device (handle lever), conforming to IS : 7231, with all fittings and

fixtures complete, including cutting and making good the walls and

floors wherever


GF Each 4 4.000


16.000 3,317.30 53,076.80

2 17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass

pillar taps, 32 mm C.P. brass waste of standard pattern, including

painting of fittings and brackets, cutting and making good the walls

wherever require:



Each

GF Each 4 4.000


16.000 1,807.10 28,913.60

3 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as

per IS 13983 with C.I. brackets and stainless steel plug 40 mm

including painting of fittings and brackets, cutting and making good

the walls wherever required :

17.10.1 Kitchen sink with drain board

17.10.1.3 510x1040 mm bowl depth 200 mm Each 16 5,966.15 95,458.40

Detailed Estimate for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P) (Residential Block - Type - II)


Total

Total

AR-2 Providing and Fixing angle stop cock(continental-053 KN) of jaquar

make

Each 16 16.000 931.00 14,896.00

4 AR-2 Providing and fixing bib cock(continental -037 KN) of jaquar make Each

GF Each 12 12.000


48.000 970.00 46,560.00

AR-2 Providing and fixing of long body bib cock (continental-107 KN) Each 16 16.000 1,335.00 21,360.00


Each 16 16.000 1,450.00 23,200.00




Each

GF Each 8 8.000


32.000 1,364.00 43,648.00

7 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior

glass (of approved quality) complete with 6 mm thick hard board

ground fixed to wooden cleats with C.P. brass screws and washers

complete.

Each 16 27.000 793.95 21,436.65

8 17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off,

supported on anodised aluminium angle frame with C.P. brass

brackets and guard rail complete fixed with 40 mm long screws, rawl

plugs etc., complete.

Each

GF Each 4 4.000


16.000 543.80 8,700.80

9 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm,

breadth 102mm, height of 75mm with concealed fitting

arrangements, weighing not less than 106 gms

Each 16 16.000 164.95 2,639.20

Total

Total

Total

10 18.48 Providing and placing having three layers with thermoconductor

material on terrace (at all floor levels) polyethylene water storage

tank, with cover and suitable locking arrangement and making

necessary holes for inlet, outlet and overflow pipes but without


per

litre

10000 10000.000 15.00 1,50,000.00


11 18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all

CPVC plain & brass threaded fittings This includes jointing of pipes &

fittings with one step CPVC solvent cement ,trenching ,refilling &

testing of joints complete as per direction of Engineer in Charge


Horizontal 1 12.000 12.000


18.000 524.10 9,433.80

18.9.3 25 mm nominal outer dia Pipes metre

Horizontal 8 12.000 96.000


144.500 209.50 30,272.75


having thermal stability for hot & cold water supply, including all

CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps

at 1.00 m spacing. This includes jointing of pipes & fittings with one

step CPVC solvent cement and the cost of cutting chases and making

good the same including testing of joints complete as per direction

of Engineer in Charge.

metre


16 9.000 144.000

144.000 270.00 38,880.00

18.17 Providing and fixing gun metal gate valve with C.I. wheel of


Total

Total

Total

18.17.1 25 mm nominal bore each 4 4 428.85 1,715.40

18.17.4 50 mm nominal bore each 2 2.000 750.75 1,501.50

18.18 Providing and fixing ball valve (brass) of approved quality, High or

low pressure, with plastic floats complete

18.18.3 25 mm nominal bore 16 16.000 449.95 7,199.20

18.20 Providing and fixing brass ferrule with C.I. mouth cover including

boring and tapping the main

each

18.20.1 15 mm nominal bore 16 16.000 245.85 3,933.60

AR-2 Providing and fixing stop cock (concealed) of jaquar make Each 48 48.000 1,215.00 58,320.00

13 19.4 Providing and fixing square-mouth S.W. gully trap class SP-1 complet

with C.I. grating brick masonry chamber with water tight C.I. cover

with frame o f 300 x300 mm size (inside) the weight of cover to be

not less than 4.50 kg and frame to be not less than 2.70 kg as per

standard design



designation 7.5

Each 8 8.000 1,571.25 12,570.00

14 17.60 Providing and fixing trap of self cleansing design with screwed down

or hinged grating with or without vent arm complete, including cost

of cutting and making good the walls and floors

17.60.2.1 Sand cast iron S&S as per IS: 3989

GF Each 8 8.000


32.000 1,020.90 32,668.80



Vertical 51 51.000


67.000 859.00 57,553.00

Total

Total


17.35.2.1 Sand cast iron S&S pipe as per IS: 1729



214.000 709.10 1,51,747.40


17.39.1 100 mm dia

17.39.1.1 Sand cast iron S&S as per IS - 1729 Each 8 8.000 434.50 3,476.00

17.39.2 75 mm dia



17.40.1 100 mm dia


17.40.2 75 mm dia



17.44.1 100x100x100 mm




17.56.1 100 mm


17.56.2 75 mm



17.57.1 100 mm


17.57.2 75 mm


18 17.58 Providing lead caulked joints to sand cast iron/centrifugally cast


17.58.2 75 mm Each 32 32.000 205.30 6,569.60

17.58.1 100 mm Each 16 16.000 243.75 3,900.00

Total

19 17.59 Providing and fixing M.S. stays and clamps for sand cast iron/


17.59.2 75 mm Each 96 96.000 57.15 5,486.40

17.59.1 100 mm Each 48 48.000 68.60 3,292.80

20 18.10 Providing and fixing G.I. pipes complete with G.I. fittings and clamps,

i/c cutting and making good the walls etc.


18.600 527.20 9,805.92

21 19.7 Constructing brick masonry manhole in cement mortar 1:4 ( 1


cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal

size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8

graded stone aggregate 40 mm nominal size), inside plastering 12

mm thick with cement mortar 1:3 (1 cement : 3 coarse sand)

finished with floating coat of neat cement and making channels in

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4

22 19.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with

frame (light duty) 455x610 mm internal dimensions, total weight

of cover and frame to be not less than 38 kg (weight of cover 23


23 19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5

Each 8 8.000

Each 4 4.000

12.000 8,507.00 1,02,084.00

24 19.8 Extra for depth for manholes

19.8.1 Size 90x80 cm


designation 7.5

Metre 4.000 4.000 5,638.20 22,552.80

Total

Total

25 19.6 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes

with collars jointed with stiff mixture of cement mortar in the

proportion of 1:2 (1 cement : 2 fine sand) including testing of joints

etc. complete :

metre


80.000 468.60 37,488.00

19.6.2 150 mm dia. R.C.C. pipe Metre 2 50.000 100.000 348.30 34,830.00

26 19.21 Making connection of drain or sewer line with existing manhole



stone aggregate 20 mm nominal size) cement plastered on both

sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished

with a floating coat of neat cement and making necessary channels

for the drain etc. complete

19.21.1 For pipes 100 to 250 mm diameter Each 2 2.000 364.60 729.20

39

19.1

Providing, laying and jointing glazed stoneware pipes class SP-1 with

stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1


19.1.1 100 mm diameter metre 25 206.55 5,163.75


40

19.2

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse

sand : 10 graded stone aggregate 40 mm nominal size) all-round

S.W. Pipes including bed concrete as per standard design :

19.2.1 100 mm diameter S.W. Pipe metre 25 592.60 14,815.00

19.2.2 150 mm diameter S.W. pipe metre 30 724.20 21,726.00

For One Block 12,17,955.47

For 5 Blocks of Type II QTRS 60,89,777.35

Total

Total=

Grand Total=

S. No.

DSR

2014

No.

Item Unit No. L B H Quantity Rate Amount


1

17.3

Providing and fixing white vitreous china pedestal type water

closet (European type) with seat and lid, 10 litre low level white

vitreous china flushing cistern & C.P. flush bend with fittings &

C.I.brackets, 40mm flush bend, overflow arrangement with

specials of standard make and mosquito proof coupling of

approved municipal design complete including painting of

fittings and brackets, cutting and making good the walls and

floors wherever required :

17.3.1 W.C. pan with ISI marked white solid plastic seat and lid. Each

GF Each 4 4.000


16.000 4,784.60 76,553.60


(European type W.C. pan) with seat and lid, 10 litre low level white

P.V.C. flushing cistern, including flush pipe, with manually controlled

device (handle lever), conforming to IS : 7231, with all fittings and

fixtures complete, including cutting and making good the walls and

floors wherever


GF Each 4 4.000


16.000 3,317.30 53,076.80

Detailed Estimate for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P) (Residential Block - Type - III-32 QTRS)


Total

Total

Page 1 of 8

3 17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass

pillar taps, 32 mm C.P. brass waste of standard pattern, including

painting of fittings and brackets, cutting and making good the walls

wherever require:



Each

GF Each 8 8.000


32.000 1,807.10 57,827.20

4 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as

per IS 13983 with C.I. brackets and stainless steel plug 40 mm

including painting of fittings and brackets, cutting and making good

the walls wherever required :17.10.1 Kitchen sink with drain board

17.10.1.3 510x1040 mm bowl depth 200 mm Each 16 5,966.15 95,458.40

5 AR-2 Providing and Fixing angle stop cock(continental-053 KN) of jaquar

make

Each 48 48.000 931.00 44,688.00

6 AR-2 Providing and fixing bib cock(continental -037 KN) of jaquar make Each

GF Each 8 8.000


32.000 970.00 31,040.00

7 AR-2 Providing and fixing of long body bib cock (continental-107 KN) Each 32 32.000 1,335.00 42,720.00


Each 32 32.000 1,450.00 46,400.00




Each

GF Each 8 8.000


32.000 1,364.00 43,648.00

Total

Total

Total

Page 2 of 8

10 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior

glass (of approved quality) complete with 6 mm thick hard board

ground fixed to wooden cleats with C.P. brass screws and washers

complete.

Each 32 27.000 793.95 21,436.65

11 17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off,

supported on anodised aluminium angle frame with C.P. brass

brackets and guard rail complete fixed with 40 mm long screws,

rawl plugs etc., complete.

Each

GF Each 8 8.000


32.000 543.80 17,401.60

12 18.65 Providing and fixing PTMT soap Dish Holder having length of

138mm, breadth 102mm, height of 75mm with concealed fitting

arrangements, weighing not less than 106 gms

Each 32 32.000 164.95 5,278.40

13 18.48 Providing and placing having three layers with thermoconductor

material on terrace (at all floor levels) polyethylene water storage

tank, with cover and suitable locking arrangement and making

necessary holes for inlet, outlet and overflow pipes but without


per litre 10000 10000.000 15.00 1,50,000.00



having thermal stability for hot & cold water supply including all

CPVC plain & brass threaded fittings This includes jointing of pipes &

fittings with one step CPVC solvent cement ,trenching ,refilling &

testing of joints complete as per direction of Engineer in Charge


Horizontal 1 25.000 25.000


57.000 524.10 29,873.70

15 18.9.3 25 mm nominal outer dia Pipes metre

Horizontal 1 110.000 110.000


270.000 209.50 56,565.00

Total

Total

Total

Page 3 of 8


having thermal stability for hot & cold water supply, including all

CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps

at 1.00 m spacing. This includes jointing of pipes & fittings with one

step CPVC solvent cement and the cost of cutting chases and

making good the same including testing of joints complete as per

direction of Engineer in Charge.

metre


4 32.000 128.000

128.000 270.00 34,560.00

17 18.17 Providing and fixing gun metal gate valve with C.I. wheel of


18.17.1 25 mm nominal bore each 8 8 428.85 3,430.80

18.17.4 50 mm nominal bore each 2 2.000 750.75 1,501.50

18 18.18 Providing and fixing ball valve (brass) of approved quality, High or

low pressure, with plastic floats complete

18.18.3 25 mm nominal bore 40 40.000 449.95 17,998.00

19 18.20 Providing and fixing brass ferrule with C.I. mouth cover including

boring and tapping the main

each

18.20.1 15 mm nominal bore 32 32.000 245.85 7,867.20

20 AR-2 Providing and fixing stop cock (concealed) of jaquar make Each 32 32.000 1,215.00 38,880.00

21 19.4 Providing and fixing square-mouth S.W. gully trap class SP-1

complet with C.I. grating brick masonry chamber with water tight

C.I. cover with frame o f 300 x300 mm size (inside) the weight of

cover to be not less than 4.50 kg and frame to be not less than 2.70

kg as per standard design



designation 7.5

Each 8 8.000 1,571.25 12,570.00

Total

Page 4 of 8

22 17.60 Providing and fixing trap of self cleansing design with screwed down

or hinged grating with or without vent arm complete, including cost

of cutting and making good the walls and floors

17.60.2.

1

Sand cast iron S&S as per IS: 3989

GF Each 32 32.000


160.000 1,020.90 1,63,344.00





250.000 859.00 2,14,750.00


17.35.2.

1

Sand cast iron S&S pipe as per IS: 1729



330.000 709.10 2,34,003.00


17.39.1 100 mm dia

17.39.1.

1

Sand cast iron S&S as per IS - 1729 Each 32 32.000 434.50 13,904.00

17.39.2 75 mm dia

17.39.2.

1



17.40.1 100 mm dia

17.40.1.

1


17.40.2 75 mm dia

Total

Total

Total

Page 5 of 8

17.40.2.

1



17.44.1 100x100x100 mm

17.44.1.

1


17.44.2.

1



17.56.1 100 mm

17.56.1.

1


17.56.2 75 mm

17.56.2.

1



17.57.1 100 mm

17.57.1.

1


17.57.2 75 mm

17.57.2.

1


26 17.58 Providing lead caulked joints to sand cast iron/centrifugally cast


17.58.2 75 mm Each 32 32.000 205.30 6,569.60

17.58.1 100 mm Each 16 16.000 243.75 3,900.00

27 17.59 Providing and fixing M.S. stays and clamps for sand cast iron/


17.59.2 75 mm Each 76 76.000 57.15 4,343.40

17.59.1 100 mm Each 51 51.000 68.60 3,498.60

28 18.10 Providing and fixing G.I. pipes complete with G.I. fittings and

clamps, i/c cutting and making good the walls etc.


18.600 527.20 9,805.92Total

Page 6 of 8

29 19.7 Constructing brick masonry manhole in cement mortar 1:4 ( 1


cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal

size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8

graded stone aggregate 40 mm nominal size), inside plastering 12

mm thick with cement mortar 1:3 (1 cement : 3 coarse sand)

finished with floating coat of neat cement and making channels in

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4

30 19.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with

frame (light duty) 455x610 mm internal dimensions, total weight

of cover and frame to be not less than 38 kg (weight of cover 23



designation 7.5

Each 8 8.000

Each 4 4.000

12.000 8,507.00 1,02,084.00

19.8 Extra for depth for manholes

19.8.1 Size 90x80 cm


designation 7.5

Metre 4.000 4.000 5,638.20 22,552.80

19.6 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes

with collars jointed with stiff mixture of cement mortar in the

proportion of 1:2 (1 cement : 2 fine sand) including testing of joints

etc. complete :

metre


40.000 468.60 18,744.00

19.6.2 150 mm dia. R.C.C. pipe Metre 2 30.000 60.000 348.30 20,898.00

Total

Total

Page 7 of 8

19.21 Making connection of drain or sewer line with existing manhole



stone aggregate 20 mm nominal size) cement plastered on both

sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished

with a floating coat of neat cement and making necessary channels

for the drain etc. complete

19.21.1 For pipes 100 to 250 mm diameter Each 12 12.000 364.60 4,375.20

39

19.1

Providing, laying and jointing glazed stoneware pipes class SP-1 with

stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1




40

19.2

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse

sand : 10 graded stone aggregate 40 mm nominal size) all-round

S.W. Pipes including bed concrete as per standard design :

19.2.1 100 mm diameter S.W. Pipe metre 80 592.60 47,408.00

19.2.2 150 mm diameter S.W. pipe metre 120 724.20 86,904.00

For One Block 19,58,292.6

For 2 Blocks of Type III -32 QTRS 39,16,585.1Total=

Grand Total=

Page 8 of 8

S.NO.

DSR NO.DESCRIPTION UNIT QTY. RATE


1 17.1

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand

cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe,

with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and

fixtures complete, including cutting and making good the walls and floors wherever required.

17.1.1White Vitreous china Orissa pattern W.C. pan of size 580x440

mm with integral type foot restsEach 4 3392.8 13571.2

2 17.3 Providing and fixing white vitreous china pedestal type water closet (European type) with seat

and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings

& C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and

mosquito proof coupling of approved municipal design complete including painting of fittings

and brackets, cutting and making good the walls and floors wherever required :


3 17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P.

brass waste of standard pattern, including painting of fittings and brackets, cutting and making

good the walls wherever require :

17.7.3 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar

tapsEach 12 2127.90 25534.8

4 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I.

brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and

making good the walls wherever required :



5 17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings

complete.


17.28.2.2 40 mm dia Each 16 76.75 1228


BILL OF QUANTITY-PLUMBING TYPE-IV ITBP BASE CAMP

AMOUNT

6 17.29 Providing and fixing 100 mm sand cast Iron grating for gully trap. Each 6 29.50 177

7 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality)

complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws

and washers complete.

Each 12 793.95 9527.4


17.34.1 C.P. brass Each 12 415.90 4990.8

9 17.37 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron

(spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1

cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of

cutting holes and making good the walls etc.



10 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP

brass screws with concealed fitting arrangement of approved quality and colour.

17.73.2 600mm long towel rail with total length of 645mm, width 78mm and effective height of

88mm, weighing not less than 190gms.Each 12 541.50 6498

CP BRASS FITTINGS

11 MR Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS

standards and weighing not less than 690 gms jaguar make continental series.


12 18.52 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved

make conforming to IS:8931.


13 18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved

quality conforming to IS:8931 a) 15 mm nominal bore



18.22.2 150 mm diameter Each 12 86.35 1036.2

15 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm,

height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms.Each 12 164.95 1979.4

17 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability



one step CPVC solvent cement and testing of joints complete as per direction of Engineer in

Charge. Exposed on wall


(Taking L.S qty.)

18 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability

for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the

pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step

CPVC solvent cement and the cost of cutting chases and making good the same including

testing of joints complete as per direction of Engineer in Charge. Concealed work, including

cutting chases and making good the walls.




19 18.1 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/ccutting and making

good the walls etc. Internal work - Exposed on wall


18.10.6 50 mm dia nominal bore metre 70 527.20 36904

20 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality

(screwed end) :





21 18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic

floats complete :

18.18.2 20 mm dia Each 409.90 0

18.18.3 25 mm dia Each 8 449.95 3599.6

22 MR Providing and placing having three layers with thermoconductor material on terrace (at all

floor levels) polyethylene water storage tank, with cover and suitable locking arrangement and

making necessary holes for inlet, outlet and overflow pipes but without fittings and the base

support for tank.(2 tank of capacity 5000 each)

litre 10000 15.00 150000

SOIL, WASTE, VENT & RAIN WATER PIPES

23 MR Providing and fixing uPVC SWR class-B(IS:13592) Nahani trap of self cleaning design

complete of approved make including cost of cutting and making good the cut-outs in walls

and floors etc. Complete in all respect as per satisfaction of the engineerin -charge



complete including jointing with solvent cement including cutting and making good the walls

wherever required. (For soil & waste pipes). Nothing extra will be paid for supports.(Inside

Toilets & Kitchen)





wherever required. (For soil, waste, vent & rain water pipes). Nothing extra will be paid for

supports.) For Vertical Pipes



26 MR Providing and fixing 100% stainless steel grating of approved make and quality grade 304 on

top of floor trap. The rate includes the cost of all ancillary works and material as required to

complete the works.

125 mm Each 20 225.00 4500

27 MR Providing and fixing in position uPVC SWR grade special /fitting of approved make including

suitable jointing to ensure leak proof service and including cutting holes in wall ,roof ,and

floors etc and making good to its original condition as per specification and satisfaction of the

engineer -in -charge.

Coupler

110 mm Each 25 62.10 1552.5

tee

110x110x110 mm Each 15 196.30 2944.5

Bend 87.5°

110 mm bend Each 5 120.50 602.5

cowl

110 mm Each 5 27.40 137

28 12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and

weighing not less than 440 grams.Each 4 41.10 164.4

29 12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS :

13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap

for thermal expansion, (i) Single socketed pipes.



30 12.42 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for

unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing

with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

12.42.1 Coupler

12.42.1.1 75 mm each 10 108.65 1086.5


12.42.4.1 75x75x75 mm each 5 195.30 976.5


12.42.6.1 75 mm Shoe each 5 167.85 839.25

EXTERNAL

31 19.7 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with

R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone

aggregate 40mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1

cement : 3 coarse sand) finished with floating coat of neat cement and making channels in

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal

size) finished with a floating coat of neat cement complete as per standard design :

19.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610

mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of

cover 23 kg and weight of frame 15 kg) :


32 19.4 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick

masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the

weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per

standard design :



33

19.1

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement

mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc.

complete :



34

19.2

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone

aggregate 40 mm nominal size) all-round S.W. Pipes including bed concrete as per standard

design :

19.2.1 100 mm diameter S.W. Pipe metre 35 592.6 20741

19.2.2 150 mm diameter S.W. pipe metre 56 724.2 40555.2

For One Block 614478 281027

Total 895505

For 2 Blocks of Type IV = (895505 x 2 = 1791009 ) 1791009

Total=

Grand Total=

S.NO. DSR NO. DESCRIPTION UNIT QTY. RATE DSR N.DSR

A.

1 17.1

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand

cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe,

with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and

fixtures complete, including cutting and making good the walls and floors wherever required.

17.1.1White Vitreous china Orissa pattern W.C. pan of size 580x440

mm with integral type foot restsEach 1 3392.8 3392.8

2 17.3

Providing and fixing white vitreous china pedestal type water closet (European type) with


fittings & C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard

make and mosquito proof coupling of approved municipal design complete including painting

of fittings and brackets, cutting and making good the walls and floors wherever required :


3 17.7

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P.

brass waste of standard pattern, including painting of fittings and brackets, cutting and

making good the walls wherever require :

17.7.3White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar

tapsEach 3 2127.90 6383.7

4 17.10

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I.

brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting

and making good the walls wherever required :



5 17.28Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings

complete.


17.28.2.2 40 mm dia Each 4 76.75 307

Detailed Estimate for Construction of Proposed ITBP Complex at Kalikiri, Chittoor (A.P) BILL OF QUANTITY-PLUMBING TYPE-V ITBP BASE CAMP

SANITARY INSTALLATIONS

6 17.29 Providing and fixing 100 mm sand cast Iron grating for gully trap. Each 7 29.50 206.5

7 17.31

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved

quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass

screws and washers complete.

Each 3 793.95 2381.85


17.34.1 C.P. brass Each 2 415.90 831.8

9 17.37

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron

(spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1

cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of

cutting holes and making good the walls etc.



10 17.73Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP

brass screws with concealed fitting arrangement of approved quality and colour.

17.73.2600mm long towel rail with total length of 645mm, width 78mm and effective height of

88mm, weighing not less than 190gms.Each 3 541.50 1624.5

CP BRASS FITTINGS

11MR Providing and fixing wall mixer in bathroom (Code - CON-273KNUPR) with provision for overhead

shower with 155 long bend pipeon upper side, connecting legs & wall flages.Each 3 3445.00 10335

12

MR Providing and fixing wall mixer in kitchen sink (Code - CON-309KN) with sink mixer wiht swinging

casted spout (wall mounted model) with connection legs & wall flanges also available Each 1 2645.00 2645

13 MR Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931


14 MRProviding and fixing C.P. brass long body bib cock of approved quality conforming to IS



15 MRProviding and fixing C.P. brass stop cock (concealed) of standard design and of approved

make conforming to IS:8931.


16 MRProviding and fixing C.P. brass angle valve for basin mixer and geyser points of approved

quality conforming to IS:8931 a) 15 mm nominal bore



18.22.2 150 mm diameter Each 3 86.35 259.05

18 18.65Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm,

height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms.Each 3 164.95 494.85

19 18.7

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability



one step CPVC solvent cement and testing of joints complete as per direction of Engineer in

Charge. Exposed on wall

18.7.3 25 mm nominal outer dia Pipes metre 12 231.30 2775.6

(Taking L.S qty.)

20 18.8

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability

for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the

pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step

CPVC solvent cement and the cost of cutting chases and making good the same including

testing of joints complete as per direction of Engineer in Charge. Concealed work, including

cutting chases and making good the walls.



21 18.10Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/ccutting and making

good the walls etc. Internal work - Exposed on wall

18.10.3 25 mm dia nominal bore (Taking LS Qty.) metre 35 304.15 10645.25

18.10.4 32 mm dia nominal bore metre 343.20 0


22 18.17Providing and fixing gun metal gate valve with C.I. wheel of approved quality

(screwed end) :





23 18.18Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic

floats complete :

18.18.2 20 mm dia Each 409.90 0

18.18.3 25 mm dia Each 2 449.95 899.9

24 MR

Providing and placing having three layers with thermoconductor material on terrace (at all

floor levels) polyethylene water storage tank, with cover and suitable locking arrangement

and making necessary holes for inlet, outlet and overflow pipes but without fittings and the

base support for tank.(1 tank of capacity 3000 each)

litre 3000 15.00 45000


25 MR

Providing and fixing uPVC SWR class-B(IS:13592) Nahani trap of self cleaning design

complete of approved make including cost of cutting and making good the cut-outs in walls

and floors etc. Complete in all respect as per satisfaction of the engineerin -charge


26 MR

Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded fittings


wherever required. (For soil & waste pipes). Nothing extra will be paid for supports.(Inside

Toilets & Kitchen)



27 MR

Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded fittings


wherever required. (For soil, waste, vent & rain water pipes). Nothing extra will be paid for

supports.) For Vertical Pipes



28 MR

Providing and fixing 100% stainless steel grating of approved make and quality grade 304 on

top of floor trap. The rate includes the cost of all ancillary works and material as required to

complete the works.

125 mm Each 5 225.00 1125

101mm Each 5 180.00 900

29 MR

Providing and fixing in position uPVC SWR grade special /fitting of approved make

including suitable jointing to ensure leak proof service and including cutting holes in wall

,roof ,and floors etc and making good to its original condition as per specification and

satisfaction of the engineer -in -charge.

Coupler

110 mm Each 5 62.10 310.5

tee

110x110x110 mm Each 0 196.30 0

Bend 87.5°

110 mm bend Each 5 120.50 602.5

cowl

110 mm Each 5 27.40 137

30 12.44Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter

and weighing not less than 440 grams.Each 0 41.10 0

31 12.41

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS

: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap

for thermal expansion, (i) Single socketed pipes.



32 12.42

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for

unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including

jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

12.42.1 Coupler

12.42.1.1 75 mm each 2 108.65 217.3

12.42.1.2 110 mm each 2 138.30 276.6


12.42.4.1 75x75x75 mm each 25 195.30 4882.5


12.42.6.1 75 mm Shoe each 10 167.85 1678.5

12.42.6.2 110 mm Shoe each 3 295.10 885.3

D. EXTERNAL

33 19.7

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with

R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone

aggregate 40mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1

cement : 3 coarse sand) finished with floating coat of neat cement and making channels in

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal

size) finished with a floating coat of neat cement complete as per standard design :

19.7.1

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610

mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of

cover 23 kg and weight of frame 15 kg) :


34 19.4

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating

brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside)

the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per

standard design :



35 19.1

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement

mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc.

complete :



36 19.2

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone

aggregate 40 mm nominal size) all-round S.W. Pipes including bed concrete as per standard

design :

19.2.1 100 mm diameter S.W. Pipe metre 30 592.6 17778

19.2.2 150 mm diameter S.W. pipe metre 10 724.2 7242

155372 102300

Grand Total 257671

Total

price sheet/boq - engineering projectsengineeringprojects.com/.../2795_004---price-bid.pdf ·...

Documents