price quote for: aftermarket tractor/skidsteer · pdf filecaterpillar: confidential green...

Price quote for: AFTERMARKET TRACTOR/SKIDSTEER ATTACHMENTS

Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #:Toll Free #:Fax #:Email Address:

1.0 Manufacturer's Name

Attachment Description Skid Steer Attachments

Warranty Term (months, years)

Discount to be applied to Price List

Date & I.D. of Price List

2.0 Delivery ChargeSee Special Terms and ConditionsDelivery Starting Point-City, State, Zip Code:

Price Per Loaded Mile:

3.0 Price for additional Service Manual

4.0 Price for additional Parts Manual

5.0 Installation - Per Hour (Shop Rate) $114.00 Installation services may be requested on an "as needed" basis.(See Special Terms and Conditions)

6.0 Extended Warranty OptionsUse this section to offer performance/warranty options,number these items starting with 6.1, 6.2, etc.(Specify years, miles or hours extended term covers.)

Price: $6.1 $6.2 $

$15.00

$0.00

800-352-2812952-887-5820

29.6%

7/21/2012, Skid Steer Loader Worktools

NO FLAT RATE ALLOWED

$1.00

Nearest Ziegler Facility

1 Year

Ziegler Inc.Jeff Schmidt, Collin Kingston, Brent Nicklay901 W 94th Street

Caterpillar

[email protected]

Minneapolis, MN 55420952-888-4121

mailto:[email protected]

CATERPILLAR MACHINE PRICE LIST WT-SSLSKID STEER LOADER WORK TOOLS Ship Weight LIST PRICE

lbs AT FACTORY

Standard Equipment:

This Price List consists of Work Toolsfor all models of Skid Steer Loader,Multi-Terrain Loader andCompact Track Loader.

216, 226, 228, 232, 236, 242, 246, 247,248, 252, 256, 257, 259, 262, 267, 268,272, 277, 279, 287, 289, 297 and 299.

NOTE :BCP Product-Work Tools are available viaBridge Orders. Delivery will be withinten days of the order being placed.Delivery will be by parts or work toolstocking truck to dealer facility.

For ordering Hammers, please usethe Hammer Price List. Hammerscannot be ordered using 0P-0096.

CWTS Product- Work Tools are FOB CWTSvia LTL carrier unless otherwise notedin this Price List. For availabilitycall 1-800-255-2372.

0P-0096 SKID STEER LOADER WORK TOOLS 0 NC............................

0P-0188 MULTI TERRAIN WORK TOOLS 0 NC................................

0P-6322 COMPACT TRACK LOADER WORK TOOL 0 NC.........................

CMOPS orders for machines and work toolsMUST be ordered separately.

Supersedes 17JUL2012 Subject to change without notice Effective 21JUL2012Printed in USA Caterpillar: Confidential Green

US-A D U. S. DOLLAR CURRENCY WT-SSL-001

CATERPILLAR MACHINE PRICE LIST WT-SSLREF Ship Weight LIST PRICE

USE NO. lbs AT FACTORYCATERPILLAR WORK TOOLS

216 THRU 299 CTL, MTL, AND SSL LOADERS

WORK TOOL COMPATIBILITY CHART

Chart illustrates which work tools are approved formaximum system performance.

NOTE: WORK TOOLS REQUIRING HF/XPS CAN ONLY BE USED ON MACHINES WITHHF/XPS OR XHP OPTION. WORK TOOLS REQUIRING XHP CAN ONLY BEUSED ON MACHINES WITH XHP OPTION.

287289

226 248 257 262 277 297216 242 228 232 236 246 247 268 252 256 259 272 267 279 299___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___

BUCKETS

GP 60" C C C C C C C C C C C C C C C66" C C C C C C C C C C C C C C C72" C C C C C C C C C C C C C C C78" C C C C C C C C C C C C C C C84" C C C C C C C C C C C C C C C

___________________________________________________________

MP 60" C C C C C C C C C C C C C C C66" C C C C C C C C C C C C C C C72" C C C C C C C C C C C C C C C78" C C C C C C C C C C C C C C C84" C C C C C C C C C C C C C C C

___________________________________________________________Dirt

54" C C C C C C C C C C C C C C C60" C C C C C C C C C C C C C C C66" C C C C C C C C C C C C C C C72" C C C C C C C C C C C C C C C78" C C C C C C C C C C C C C C C

___________________________________________________________

LM 72" C C C C C C C C C C C C C C C78" C C C C C C C C C C C C C C C84" C C C C C C C C C C C C C C C96" C C C C C C C C C C C C C C C

___________________________________________________________Utility

60" C C C C C C C C C C C C C C C66" C C C C C C C C C C C C C C C72" C C C C C C C C C C C C C C C

___________________________________________________________AUGERSA14B C C C C C C C C C C C C C C CA19B C C C C C C C C C C C C C C CA26B XPS C C C C C C C C C

___________________________________________________________





216 THRU 299 CTL, MTL, AND SSL LOADERS (CONT.)

WORK TOOL COMPATIBILITY CHART (Cont.)


287289

226 248 257 262 277 297216 242 228 232 236 246 247 268 252 256 259 272 267 279 299___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___

BACKHOESBH150 C C C C C C C C C C CBH160 C C C C C C C C C

___________________________________________________________ANGLEBLADES

72" C C C C C C C C C C C C C C C84" C C C C C C C C C C C C C C C

___________________________________________________________DOZERBLADES


___________________________________________________________BROOMSBA18 C C C C C C C C C C C C C C CBP15B L C C C C C L C C C C C C C CBP18B C C C C C C L C C C CBU115 L C C C C C L C C C C C C C CBU118 C C C C C C L C C C C

___________________________________________________________

BRUSHCUTTERSBR160 C C CBR166 C C C C C C C C C C C C C C CBR172 C C C C C C C C C C C C C C CBR272 HF C C CBR378 XPS C C C C C C

___________________________________________________________COLDPLANERSPC203 C C C C C C C C C C C C C C CPC204 C C C C C C C C C C C C C CPC205B SFHF C C C CPC205 XPS C C C C C C C C CPC206 XPS C C C C C C C C CPC210 XPS L C L C C CPC408B XHP C CPC412B XHP C C

___________________________________________________________CARRIAGES/TINES C C C C C C C C C C C C C C C

___________________________________________________________UTILITYFORKS


___________________________________________________________Supersedes 17JUL2012 Subject to change without notice Effective 21JUL2012

Printed in USA Caterpillar: Confidential GreenUS-A D U. S. DOLLAR CURRENCY WT-SSL-003






287289

226 248 257 262 277 297216 242 228 232 236 246 247 268 252 256 259 272 267 279 299___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___

INDUSTRIALGRAPPLE BUCKETS

60" C C C C C C C C C C C C C C C66" C C C C C C C C C C C C C C C72" C C C C C C C C C C C C C C C78" C C C C C C C C C C C C C C C

___________________________________________________________INDUSTRIALGRAPPLE FORKS


___________________________________________________________INDUSTRIALGRAPPLE RAKES


___________________________________________________________UTILITYGRAPPLE BUCKETS


___________________________________________________________UTILITYGRAPPLE FORKS


___________________________________________________________LANDSCAPERAKESLR15B L L L L L L L L L L L L L L LLR18B L L L L L L L L L L L

___________________________________________________________LANDSCAPETILLERSLT13B C C C C C C C C C C C C C C CLT18B C C C C C C C C C C C

___________________________________________________________MATERIALHANDLINGARM C C C C C C C C C C C C C C C

___________________________________________________________MULCHERHM312 XPS C C C C C CHM315 XPS C C C C C C








287289

226 248 257 262 277 297216 242 228 232 236 246 247 268 252 256 259 272 267 279 299___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___

POWERBOX RAKESPR172 C C C C C C C C C C C C C C CPR184 C C C C C C C C C C C C C C CPR190 C C C C C C C C C C C C C C C

___________________________________________________________SHEARSS305 C C C C C C C C C

___________________________________________________________SNOWBLOWERSSR117 C C C CSR118 C C C C C C C C CSR121 C C C C C C C C CSR318 XPS C C C C C C C C CSR321 XPS C C C C C C C C C

___________________________________________________________STUMP GRINDERSSG16B C C C C C C C C C C C C C C CSG18B XPS C C C C C C C C C

___________________________________________________________TRENCHERST6B C C C C C C C C C C C C C C CT9B C C C C C C C C C C C C C C CT15B XPS C C C C C C C C C

___________________________________________________________VIBRATORYCOMPACTORSCV16B L L L L L C L C C C L C C C CCV18B C C C C C C C C

___________________________________________________________WHEEL SAWSSW45 3" XPS L L LW C W L W C CSW45 6" XPS L L W C W L W C CSW45 8" XPS L L W C W L W C CSW60 6" XPS L LW W C CSW60 8" XPS L LW W C C

___________________________________________________________

C = CompatibleL = compatible, but lift restrictions applyW = Compatible, but counter weights required






AUGERS

W 218-3178 AUGER, A14B 377 $2,439 NI.......................................(BCP Product)Direct drive unit with 2" hex output shaft.Includes:225-3895 Drive Group211-5044 Mounting Group225-0896 Lines GroupREQUIRES: Standard Flow Hydraulics

W 219-7706 AUGER, A19B 417 $2,894 NI.......................................(BCP Product)Planetary drive unit with 2" hex output shaft.Includes:230-5578 Drive Group211-5044 Mounting Group161-5858 Lines GroupREQUIRES: Standard Flow Hydraulics

W 246-1486 AUGER, A26B, HF 391 $4,625 NI...................................(BCP Product)Planetary drive unit with 2" hex output shaftIncludes:225-8809 Drive Group211-5044 Mounting Group246-1497 Lines GroupREQUIRES: High Flow Hydraulics and Kit #241-8673for use with A-Series Machines.

****************************************************************** Matrix provides recommended Auger / Bit Combinations.* Auger Bit Tree Bit* 6" 9" 12" 18" 24" 30" 36" 24" 36"* ---------------------------------* A14B O O O O O A ! O !* A19B O O O O O O A O A* A26B O O O O O O O O O* Combination limits depend upon soil conditions & machine model.*****************************************************************

AUGER BITS

Standard Duty, Approx. 50" (1270mm) Length, HEX Shaft, Double FlightBit teeth are hardened, reversible and forged from medium carbonalloy steel.

W 153-4083 BIT, AUGER 6" 50 $311 NI.......................................(BCP Product)

Includes TWO teeth and pilot pointW 153-4084 BIT, AUGER 9" 75 $497 NI.......................................

(BCP Product)Includes FOUR teeth and pilot point






AUGERS (Cont.)

W 153-4085 BIT, AUGER 12" 100 $610 NI.....................................(BCP Product)

Includes FOUR teeth and pilot pointW 366-7752 BIT, AUGER 15" STANDARD 109 $701 NI............................

(BCP Product)Indcludes FIVE teeth and pilot point

W 153-4086 BIT, AUGER 18" 144 $807 NI.....................................(BCP Product)

Includes SIX teeth and pilot pointW 153-4089 BIT, AUGER 24" 200 $1,011 NI.....................................

(BCP Product)Includes EIGHT teeth and pilot point

W 217-3194 BIT, AUGER 30" 212 $1,129 NI.....................................(BCP Product)

Includes TEN teeth and pilot pointW 153-4091 BIT, AUGER 36" 380 $1,569 NI.....................................

(BCP Product)Includes TWELVE teeth and pilot point

SPECIAL APPLICATION BITS

W 372-0260 BIT, AUGER 6" INDUSTRIAL 57 $492 NI..............................(BCP Product)Includes TWO teeth and pilot point

W 372-0261 BIT, AUGER 9" INDUSTRIAL 72 $585 NI..............................(BCP Product)

W 372-0262 BIT, AUGER 12" INDUSTRIAL 91 $665 NI.............................(BCP Product)

W 372-0263 BIT, AUGER 16" INDUSTRIAL 114 $981 NI............................(BCP Product)Includes SIX teeth and pilot point

W 372-0264 BIT, AUGER 18" INDUSTRIAL 107 $1,010 NI............................(BCP Product)Includes SIX teeth and pilot point

W 372-0265 BIT, AUGER 24" INDUSTRIAL 151 $1,329 NI............................(BCP Product)Includes EIGHT teeth and pilot point






AUGERS (Cont.)

W 153-4092 TREE BIT, AUGER 24" 163 $921 NI.................................(BCP Product)Tapered bit, includes FIVE teeth on 24" (610mm) width, FOUR teeth

on 12" (305mm) width and pilot pointW 153-4095 TREE BIT, AUGER 36" 310 $1,444 NI.................................

(BCP Product)Tapered bit, includes SEVEN teeth on 36" (914mm) width, SIX teeth

on 18" (457mm) width and pilot pointW 372-0230 ROCK HEAD, 6" BOLT-ON 23 $281 NI...............................

(BCP Product)

W 372-0231 ROCK HEAD, 9" BOLT-ON 33 $351 NI...............................(BCP Product)

W 372-0232 ROCK DRILL HEAD, 12" STANDARD 41 $421 NI........................(BCP Product)

W 372-0233 ROCK HEAD, 15" BOLT-ON 47 $492 NI..............................(BCP Product)

W 372-0234 ROCK DRILL HEAD, 18" STANDARD 55 $561 NI........................(BCP Product)

W 372-0235 ROCK DRILL HEAD, 24" STANDARD 79 $736 NI.......................(BCP Product)

ADAPTER

W 156-6329 ADAPTER, AUGER - HEX TO ROUND 15 $172 NI.......................(BCP Product)

HEX output shaft 2" (50mm) to round output shaft 2 9/16" (65mm)W 217-3191 ADAPTER, AUGER - ROUND TO HEX 15 $147 NI.......................

(BCP Product)Round output shaft 2.56" (65mm) to HEX output shaft 2" (50mm)

EXTENSION

W 372-0256 EXTENSION, TELESCOPING 3' 43 $351 NI............................(BCP Product)

FOR USE WITH: All Auger Bits






AUGERS (Cont.)

W 372-0257 EXTENSION, TELESCOPING 6' 77 $596 NI............................(BCP Product)

FOR USE WITH: All Auger BitsW 156-6328 EXTENSION, AUGER 12" 20 $154 NI................................

(BCP Product)12" (305mm) length HEX shaft

FOR USE WITH: All Auger BitsW 217-3192 EXTENSION, AUGER 24" 33 $207 NI................................

(BCP Product)24" (610mm) length HEX shaft

FOR USE WITH: All Auger Bits

Available through Parts only, NO BRIDGE ORDERS-----------------------------------------------Replacement teeth and hardware for all auger bits:153-4094 Standard Duty Tooth174-9566 Hard Face Tooth optional174-9567 Carbide Inserted Tooth optional153-4093 Pilot Point

Required Pilot Point Hardware:7X-2549 (1) Bolt6V-7687 (1) Locknut

Required Teeth Hardware:6V-8959 (1) Bolt6V-7687 (1) Locknut

BACKHOES

Quick-coupler mounted Backhoe for in-cab operation. Buckets arenot included with the Backhoes, these must be ordered separately.One set of Bucket Pins are included with the BH150 and BH160.

Backhoe Mounting Groups






BACKHOES (Cont.)

W 258-3639 GROUP, BACKHOE MOUNTING 106 $515 NI..........................(BCP Product)Mandatory for use with 304-9900 & 304-9901 on C-Series machines

W 367-9770 GROUP, BACKHOE MOUNTING 106 $515 NI..........................(BCP Product)Kit allows BH150 models to mount on C-Series machinesMandatory for use with 304-9902 & 304-9903 on C-Series machines

W 304-9904 GROUP, MOUNTING, BH160 50 $451 NI.............................(BCP Product)Mandatory for use with 304-9900 on machines PRIOR TO C-Seriesmachines PRIOR TO C-Series

W 304-9905 GROUP, MOUNTING, BH150 53 $469 NI.............................(BCP Product)Mandatory for use with 304-9902 & 304-9903 onmachines PRIOR TO C-SeriesNot compatible with the following PRIOR TO C-Series machines:246, 262, 277 and 287






BACKHOES (Cont.)

BH30 / BH30W BACKHOE ACCESSORIES

BH30W BACKHOE MOUNTING FOR USE WITH C-SERIES MACHINES

Please order one 258-3639 Backhoe Mounting Group and two211-9558 link arms (available through parts only) to mount aBH30W to a C-Series machine.

BH30 / BH30W BACKHOE BUCKETS

The following 302.5 MHE Work Tools can be used with the BH30 and BH30WBackhoe attachments. For additional details, please refer to theWT-MHE price list.

Only the 10" Digging Bucket includes mounting pins.

W 176-7283 BUCKET-DIG, 10" 112 $719 NI....................................(BCP Product)






W 153-7863 BUCKET-DC, 32" 179 $858 NI.....................................(BCP Product)








BACKHOES (Cont.)

BH30 / BH30W BACKHOE BUCKET PINS

Recommended: A set of Bucket Pins for each additional bucketordered when machine is equipped with a quick coupler.

W 154-2683 PINS, BUCKET 13 $100 NI........................................(BCP Product)Includes 2 bucket pins and hardwareFOR USE WITH 240-4060 Quick Coupler

BH150 / BH160 BACKHOE BUCKETS

The following 303.5 MHE buckets can be used with the BH150 and BH160Backhoe attachments. For additional details, please refer to theWT-MHE price list.

HEAVY DUTY

W 303-1324 BUCKET, 12", 1.7 CFT, HD 139 $892 NI.............................(BCP Product)Includes 3 J200 tooth tips



W 303-1327 BUCKET, 20", 3.3 CFT, HD 193 $1,057 NI.............................(BCP Product)Includes 5 J200 tooth tips

W 303-1328 BUCKET, 24", 4.2 CFT, HD 217 $1,117 NI............................(BCP Product)Includes 5 J200 tooth tips

W 303-1329 BUCKET, 30", 5.6 CFT, HD 253 $1,289 NI.............................(BCP Product)Includes 5 J200 tooth tips






BACKHOES (Cont.)

DITCH CLEANING

W 279-4322 BUCKET-DC, 40" 234 $1,050 NI.....................................(BCP Product)0.17 CYD / 4.59 CFT Heaped CapacityIncludes rear grading edge

W 279-4323 BUCKET-DC, 47" 234 $1,069 NI.....................................(BCP Product).209 CYD / 5.64 CFT Heaped Capactiy

W 282-9315 BUCKET-DC, 55" 234 $1,178 NI.....................................(BCP Product).249 CYD / 6.72 CFT Heaped Capacity

BH150 / BH160 BACKHOE BUCKET PINS

W 154-2638 PINS,BUCKET 11 $125 NI........................................(BCP Product)INCLUDES: 2 bucket pins and hardwareFOR USE WITH: 240-4077 Quick Coupler

BACKHOE HAMMER GUARD

Hammer guard REQUIRED for operator protection against flyingobjects on backhoes.

W 211-2082 GUARD, OP PROTECTION MESH 13 $613 NI..........................(BCP Product)Provides a fine mesh guard mounted to front of cab.For use with machines when operating hydraulic hammersor other applications which might produce flying objects.

ADDITIONAL AUXILIARY HYDRAULIC BACKHOE TOOLS

AUGERS

Hydraulic lines, Auxiliary Front REQUIRED for operation ofthese Work Tools.

W 218-3198 A14B AUGER, DRIVE UNIT 264 $2,481 NI..............................(BCP Product)INCLUDES: DIRECT drive unit, hydraulic lines with quick disconnects,mounting bracket, hardware and 2" (50mm) HEX output shaft.






BACKHOES (Cont.)

W 220-7137 A19B AUGER, DRIVE UNIT 205 $3,104 NI..............................(BCP Product)INCLUDES:PLANETARY drive unit, hydraulic lines with quick disconnects,mounting bracket, hardware and 2" (50mm) HEX output shaft.

AUGER ATTACHMENTS

ADAPTERS

W 156-6329 ADAPTER, AUGER - HEX TO ROUND 15 $172 NI.......................(BCP Product)HEX output shaft 2" (50mm) to round output shaft 2 9/16" (65mm)

W 217-3191 ADAPTER, AUGER - ROUND TO HEX 15 $147 NI.......................(BCP Product)Round output shaft 2.56" (65mm) to HEX output shaft 2" (50mm)

AUGER BITS

Standard Duty, Approx. 50" (1270mm) Length, Hex Shaft, Double FlightBit teeth are hardened, reversible and forged from medium carbonalloy steel.

W 153-4083 BIT, AUGER 6" 50 $311 NI.......................................(BCP Product)INCLUDES: 2 teeth and pilot point

W 153-4084 BIT, AUGER 9" 75 $497 NI.......................................(BCP Product)INCLUDES: 4 teeth and pilot point

W 153-4085 BIT, AUGER 12" 100 $610 NI.....................................(BCP Product)INCLUDES: 4 teeth and pilot point

W 153-4086 BIT, AUGER 18" 144 $807 NI.....................................(BCP Product)INCLUDES: 6 teeth and pilot point

W 153-4089 BIT, AUGER 24" 200 $1,011 NI.....................................(BCP Product)INCLUDES: 8 teeth and pilot pointFor use with A14B and A19B Auger Drive Unit

W 153-4092 TREE BIT, AUGER 24" 163 $921 NI.................................(BCP Product)Tapered bit, includes FIVE teeth on 24" (610mm) width, FOUR teethon 12" (305mm) width and pilot point.For use with A14B and A19B Auger Drive Unit

W 217-3194 BIT, AUGER 30" 212 $1,129 NI.....................................(BCP Product)Includes TEN teeth and pilot point






BACKHOES (Cont.)

EXTENSIONS

W 156-6328 EXTENSION, AUGER 12" 20 $154 NI................................(BCP Product)12" (305mm) HEX shaft

W 217-3192 EXTENSION, AUGER 24" 33 $207 NI................................(BCP Product)24" (610mm) length HEX shaft

TILT DITCH CLEANING BUCKET

W 279-4325 BUCKET - TILTING, DC, 47" 357 $3,454 NI............................(BCP Product).209 CYD / 5.6 CFT Heaped CapacityIncludes rear grading edge

COMPACTOR - PIN ON

W 222-3780 CVP16 COMPACTOR PLATE 474 $5,600 NI.............................Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & Services(CWTS PRODUCT)REQUIRES Mounting Bracket And Connector Lines

W 222-6443 BLADE, BACKFILL 34 $717 NI.....................................Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & Services(CWTS PRODUCT)FOR USE WITH: CVP16 COMPACTOR

W 280-9827 MOUNTING BRACKET, PIN-ON 84 $819 NI............................(CWTS PRODUCT)

W 265-7461 BRACKET, SWIVEL 180 $1,286 NI...................................(CWTS PRODUCT)FOR USE WITH: 222-3780 Compactor and 280-9827 Mounting Bracket

W 203-0977 LINES, CONNECTOR 22 $618 NI...................................Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & Services(CWTS PRODUCT)

COUPLER

W 240-4077 QUICK COUPLER,PIN GRABBER,MAN. 66 $1,358 NI.......................(BCP Product)Base machine includes one set of pins and hardwareto attach one bucket.REQUIRES: 154-2638 bucket pins for EACH ADDITIONAL bucket






BACKHOES (Cont.)

THUMB

W 281-6681 THUMB, HYDRAULIC 136 $2,221 NI..................................(CWTS PRODUCT)No-LinkIncludes Thumb Group w/2 Teeth

BLADES

ANGLE BLADES

Heavy duty, high capacity design for moving dirt, gravel, livestockwaste and snow.

W 177-1989 ANGLE BLADE, 72" 690 $3,114 NI...................................(BCP Product)REQUIRES: Standard Flow HydraulicsBolt-on cutting edge, 1 piece72" (1829mm) overall width24" (610mm) blade heightHydraulic Angling - 30 degree left or right of center4 Trip Springs2 Heavy Duty Adjustable Skid FeetIncludes - Hydraulic lines with quick disconnects,

mounting bracket and hardwareW 177-1990 ANGLE BLADE, 84" 730 $3,318 NI..................................

(BCP Product)REQUIRES: Standard Flow HydraulicsBolt-on cutting edge, 1 piece84" (2134mm) overall width24" (610mm) blade heightHydraulic Angling - 30 degree left or right of center4 Trip Springs2 Heavy Duty Adjustable Skid FeetIncludes - Hydraulic lines with quick disconnects,

mounting bracket and hardware

ANGLE BLADE OPTIONS

Snow kits include guard, markers, and mounting hardware.Non-metallic edge not included in snow kits.

W 225-9522 KIT, SNOW AND IMPACT, 72" 50 $608 NI...........................(BCP Product)

W 225-9523 KIT, SNOW AND IMPACT, 84" 50 $608 NI...........................(BCP Product)






BLADES (Cont.)

Available through Parts - NO BRIDGE ORDERS----------------------------------------165-8477 Bolt on Non-metallic 72" edge165-8478 Bolt on Non-metallic 84" edge

Required Hardware for 72" and 84" edgePart # Description 72" Qty 84" Qty------ ----------- ------- -------8T-4140 Bolt 6 78T-4778 Locknut 6 7165-7095 Washer 6 7

DOZER BLADES

Designed for rough and finish grading of dirt and gravel,as well as light dozing applications.

W 231-5277 BLADE, DOZER, 6-WAY, 79" 1,083 $6,517 NI.........................(BCP Product)REQUIRES: Standard Flow HydraulicsBolt-on cutting edge, 3 Pieces79" (2002mm) overall width24" (619mm) overall heightHydraulic Angling - 30 degrees left or right of centerHydraulic Tilt - 10 degrees left or right of center2 Heavy duty Adjustable Skid FeetIncludes - Hydraulic lines with quick disconnects,

mounting bracket and hardwareREQUIRES: CONTROL, WORK TOOL, ELECTRICAL(order with machine)

W 231-5275 BLADE, DOZER, 6-WAY, 92" 1,164 $7,158 NI.........................(BCP Product)REQUIRES: Standard Flow HydraulicsBolt-on cutting edge, 3 Pieces92" (2342mm) overall width24" (619mm) overall heightHydraulic Angling - 30 degrees left or right of centerHydraulic Tilt - 10 degrees left or right of center2 Heavy Duty Adjustable Skid FeetIncludes - Hydraulic lines with quick disconnects,

mounting bracket and hardwareREQUIRES: Control, Work Tool, Electrical(order with machine)

BROOMS

ANGLE BROOMS






BROOMS (Cont.)

Control, Work Tool, Electrical also REQUIRED for operation ofBA18 with Hydraulic Angling. (Order with machine)

W 241-8235 BROOM, MANUAL ANGLE, BA18 900 $7,232 NI.........................(BCP Product)REQUIRES: Standard Flow HydraulicsMANUAL Angling - 31 degree left or right of center91" (2311mm) overall width84" (2134mm) sweeping width - straight67" (1702mm) sweeping width - angled32" (813mm) brush diameterBrush material - 50% polypropylene / 50% steel wireFour heavy duty storage standsIncludes - hydraulic lines with quick disconnects,

mounting bracket and hardwarecW 241-8236 BROOM, HYDRAULIC ANGLE, BA18 920 $9,238 NI.......................

(BCP Product)HYDRAULIC Angling - 31 degree left or right of centerHydraulic angle change with electrohydraulic valve91" (2311mm) overall width84" (2134mm) sweeping width - straight67" (1702mm) sweeping width - angled32" (813mm) brush diameterBrush material - 50% polypropylene / 50% steel wireFour heavy duty storage standsIncludes - Hydraulic lines with quick disconnects,

mounting bracket and hardwareREQUIRES: Control, Work Tool, Electrical

( order with machine )

ANGLE BROOM OPTIONS

W 166-0320 KIT, WATER SPRINKLER 20 $613 NI.................................(BCP Product)Work tool water sprinkling kit complete with sprinkler heads (6),hoses, mounting hardware and quick disconnects for effectivedust control.FOR USE WITH 166-0287 or 166-0288 BroomREQUIRES: Control, Work Tool, Electrical

( order with machine )Water Tank, Machine( reference Machine Attachments section ofthis price list to order )






BROOMS (Cont.)

W 248-5788 KIT, WATER SPRINKLER 20 $869 NI.................................(BCP Product)Work tool water sprinkling kit complete with sprinkler heads (6),hoses, mounting hardware and quick disconnects for effectivedust control.FOR USE WITH 241-8235 or 241-8236 BroomREQUIRES: Control, Work Tool, Electrical


W 242-7199 KIT, DEFLECTOR 47 $467 NI......................................(BCP Product)Angle Broom Deflector Kit includes steel cowl extension andrubber debris deflector flap. All hardware included to mountkit to Angle Broom.

PICKUP BROOMS

W 241-8233 BROOM, PICKUP, BP15B 960 $6,767 NI...............................(BCP Product)REQUIRES: Standard Flow Hydraulics75" (1905mm) overall width60" (1524mm) working width26" (660mm) brush diameterAdjustable brush heightBrush material - 50% polypropylene / 50% steel wireIncludes: Hydraulic lines with quick disconnects andbrush frame chains.REQUIRES: Bracket

W 241-8234 BROOM, PICKUP, BP18B 1,032 $7,736 NI.............................(BCP Product)REQUIRES: Standard Flow Hydraulics87" (2210mm) overall width72" (1829mm) working width26" (660mm) brush diameterAdjustable brush heightBrush material - 50% polypropylene / 50% steel wireIncludes: Hydraulic lines with quick disconnects andbrush frame chains.REQUIRES: Bracket






BROOMS (Cont.)

PICK UP BROOM BRACKETS

NOTE: Pick Up Broom Brackets are required for use with A & B Seriesmachines. They are not needed for C Series machines.

W 296-3649 BRACKET, BROOM 51 $392 NI....................................(BCP Product)Supports brush frame while dumpingIncludes right and left side bracket assemblies toattach to machine lift armsREQUIRED FOR: 216, 226, 228, 236, 246, 247, 248, 267 or277 A & B Series machines

W 206-7974 BRACKET 50 $324 NI...........................................(BCP Product)Supports brush frame while dumpingIncludes right and left side bracket assemblies and chains toattach to machine lift armsREQUIRED FOR: 252, 262, 268 or 287 A & B Series machines

W 296-3648 BRACKET, BROOM 34 $263 NI....................................(BCP Product)Supports brush frame while dumpingIncludes right and left side bracket assemblies toattach to machine lift armsREQUIRED FOR: 232, 242, 257 or 259 A & B Series machines

UTILITY BROOMS

W 221-1980 BROOM, UTILITY, BU115 904 $4,849 NI..............................(BCP Product)71" (1810mm) overall width59" (1510mm) sweeping width26" (660mm) brush diameterBrush material: 100% polypropyleneRequires: Standard Flow Hydraulics

W 221-1990 BROOM, UTILITY, BU118 992 $5,269 NI..............................(BCP Product)83" (2115mm) overall width73" (1865mm) sweeping width26" (660mm) brush diameterBrush material: 100% PolypropyleneRequires: Standard Flow Hydraulics






BROOMS (Cont.)

PICK UP AND UTILITY BROOM OPTIONS

W 242-7200 BRUSH, GUTTER, B-SERIES 119 $2,592 NI.............................(BCP Product)100% steel wireLeft or right side mountAll hydraulic lines includedFOR USE WITH: BP15B OR BP18BNOTE: 242-7200 Gutter Brush requires mounting kit 257-5229 when usedon BU115 and BU118 Brooms. Order 257-5229 from the Parts System.

W 257-3140 MOUNTING BRACKET, NOZZLE 2 $54 NI............................(BCP Product)Additional mounting brackets for sprinkler heads on UtilityBrooms only. FOUR REQUIRED PER BROOM.

W 256-9335 KIT, WATER SPRINKLER 10 $229 NI.................................(BCP Product)Work tool water sprinkling kit complete with sprinkler heads (4)hoses, mounting hardware and quick disconnects for effectivedust control.FOR USE WITH 241-8233, 241-8234, 221-1980 or 221-1990 BroomsREQUIRES: Control, Work Tool, Electrical


Available through Parts only - NO BRIDGE ORDERS-------------------------------------------------

Edge GP, Cutting for BU115 and BP15B 241-9437 (Qty 1)4F3648 Bolt (Qty 6)6V8188 Nut (Qty 6)

Edge GP, Cutting for BU118 and BP18B 241-9472 (Qty 1)4F3648 Bolt (Qty 7)6V8188 Nut (Qty 7)

Kit - Poly Bristle for BA18 Brooms 166-0322 (Qty 1)Includes 22 poly bristle assemblies

Kit - Wire Bristle for BA18 Brooms 166-0323 (Qty 1)Includes 21 wire bristle assemblies

Kit - Poly Bristle for Utility & Push Brooms 165-9069 (Qty 1)Includes 18 poly bristle assemblies

Kit - Wire Bristle for Utility & Push Brooms 165-9070 (Qty 1)Includes 17 wire bristle assembliles






BRUSHCUTTERS

NOTE: Operator protection against flying objects RECOMMENDED.If not ordered with machine; Door, Cab, Polycarbonate shouldbe ordered. Please see machine price list for availability.

W 264-9500 BRUSHCUTTER, BR160, 60" 940 $6,032 NI............................(BCP Product)60" (1524mm) working width62" (1575mm) overall widthRequires: 60 LPM Standard Flow Hydraulics. Not compatible with80 LPM.

W 264-9600 BRUSHCUTTER, BR166, 66" 1,020 $6,313 NI..........................(BCP Product)66" (1676mm) working width68" (1727mm) overall widthRequires: Standard Flow Hydraulics

W 264-9400 BRUSHCUTTER, BR172, 72" 1,094 $6,593 NI..........................(BCP Product)72" (1829mm) working width74" (1880mm) width overallRequires: Standard Flow Hydraulics

W 264-9300 BRUSHCUTTER, BR272, 72" HF 1,096 $6,874 NI........................(BCP Product)72" (1829mm) working width74" (1880mm) overall widthFor use with 226B and 242B machines equipped with High Flow Option.

W 264-9100 BRUSHCUTTER, BR378, 78" HF,XPS 1,175 $8,276 NI....................(BCP Product)78" working width80" overall widthRequires: High Flow XPS or High Flow Hydraulics

NOTE: Engine Debris Kit and Turbo Debris Guard Kit are recommendedfor use in applications which create airborne debris, such as:mulching, brush cutting, paper recycling and certain agriculturepractices. Please refer to the machine price pages for part numbersunder Field Installed Attachments: Kit, Debris Barrier, Engine andKit, Turbo Debris Guard.






BUCKETS

GENERAL PURPOSE BUCKETS

All purpose buckets. For construction, landscaping, industrialand more aggressive job site requirements.

W 279-5364 BUCKET-GP, BASE EDGE 60" 448 $947 NI............................(BCP Product).47 CYD / 12.7 CFT (.36 CUM) Heaped CapacityIncludes - Base Edge with drilled mounting holes

W 279-5365 BUCKET-GP, BOCE 60" 448 $1,147 NI................................(BCP Product).47 CYD / 12.7 CFT (.36 CUM) Heaped CapacityIncludes - Bolt On Edge, 1 Piece

W 279-5366 BUCKET-GP, BOT 60" 448 $1,361 NI.................................(BCP Product).47 CYD / 12.7 CFT (.36 CUM) Heaped CapacityIncludes - 8 Single Strap Bolt-on UniteethRecommended for use with C-Series machines

W 279-5368 BUCKET-GP, BASE EDGE 66" 561 $1,293 NI............................(BCP Product).52 CYD / 14.0 CFT (.40 CUM) Heaped CapacityIncludes - Base Edge with drilled mounting holes

W 279-5369 BUCKET-GP, BOCE 66" 561 $1,519 NI................................(BCP Product).52 CYD / 14.0 CFT (.40 CUM) Heaped CapacityIncludes - Bolt-on cutting edge, 1 Piece

W 279-5370 BUCKET-GP, BOT 66" 561 $1,704 NI.................................(BCP Product).52 CYD / 14.0 CFT (.40 CUM) Heaped CapacityIncludes - 8 Single Strap Bolt-on Uniteeth










BUCKETS (Cont.)



W 292-9270 BUCKET-GP, BASE EDGE 84" 635 $1,663 NI............................(BCP Product).82 CYD / 22.2 CFT (.63 CUM)Includes - Base Edge with drilled mouting holes

W 296-8192 BUCKET-GP, BOCE 84" 723 $1,946 NI................................(BCP Product).82 CYD / 22.2 CFT (.63 CUM)Includes - Bolt-on cutting edge, 1 Piece

W 296-8191 BUCKET-GP, BOT 84" 669 $2,081 NI.................................(BCP Product).82 CYD / 22.2 CFT (.63 CUM)Includes - 9 Single Strap Bolt-on Uniteeth

DIRT BUCKETS

Lower capacity buckets. For light duty construction or landscapingwork.

W 279-5435 BUCKET-DT, BOCE 54" 392 $867 NI................................(BCP Product).39 CYD / 10.5 CFT (.30 CUM) Heaped CapacityIncludes - Bolt-on cutting edge, 1 PieceRecommended for use on all Series of machines

W 152-0231 BUCKET-DT, BOCE 60" 395 $1,290 NI................................(BCP Product).44 CYD / 11.9 CFT (.34 CUM) Heaped CapacityIncludes - Bolt On Edge, 1 Piece

W 279-5438 BUCKET-DT, BOCE 60" 451 $986 NI................................(BCP Product).44 CYD / 11.9 CFT (.34 CUM) Heaped CapacityIncludes - Bolt On Edge, 1 PieceRecommended for use on all Series of machines

W 279-5441 BUCKET-DT, BOCE 66" 512 $1,185 NI................................(BCP Product).48 CYD / 13.0 CFT (.37 CUM) Heaped CapacityIncludes - Bolt On Edge, 1 PieceRecommended for use on all Series of machines






BUCKETS (Cont.)

W 285-6090 BUCKET-DT, BOCE 72" 546 $1,247 NI................................(BCP Product).53 CYD / 14.3 CFT (.41 CUM) Heaped CapacityIncludes - Bolt-on cutting edge, 1 Piece

Recommended for use on all Series of machinesW 268-4083 BUCKET-DT, BOCE 78" 583 $1,375 NI................................

(BCP Product).57 CYD / 15.4 CFT (.44 CUM) Heaped CapacityIncludes - Bolt-on cutting edge, 1 Piece

LIGHT MATERIAL BUCKETS

Highest capacity buckets. Ideal for handling light duty material,such as landscaping mulch, fertilizer, livestock feed and litter.Often used in landscaping and agricultural applications.

W 279-5421 BUCKET-LM, BASE EDGE 72" 668 $1,547 NI...........................(BCP Product).90 CYD / 24.3 CFT (.69 CUM) Heaped CapacityIncludes - Base Edge with drilled mounting holesRecommended for use with C-Series machines

W 279-5420 BUCKET-LM, BOCE 72" 668 $1,793 NI................................(BCP Product).90 CYD / 24.3 CFT (.69 CUM) Heaped CapacityIncludes - Bolt-on cutting edge, 1 Piece

W 279-5424 BUCKET-LM, BASE EDGE 78" 706 $1,643 NI...........................(BCP Product).98 CYD / 26.5 CFT (.75 CUM) Heaped CapacityIncludes - Base Edge with drilled mounting holes

W 279-5425 BUCKET-LM, BOCE 78" 706 $1,907 NI................................(BCP Product).98 CYD / 26.5 CFT (.75 CUM) Heaped CapacityIncludes - Bolt-on cutting edge, 1 Piece

W 279-5430 BUCKET-LM, BOCE 84" 746 $2,003 NI................................(BCP Product)1.1 CYD / 29.7 CFT (.84 CUM) Heaped CapacityIncludes - Bolt-on cutting edge, 1 PieceRecommended for use with C-Series machines

W 296-7597 BUCKET-LM, BOCE 96" 806 $2,179 NI................................(BCP Product)1.22 CYD / 32.8 CFT (.93 CUM) Heaped CapacityIncludes - Bolt-on cutting edge, 1 piece






BUCKETS (Cont.)

MULTI PURPOSE BUCKETS

Similar applications as GP Buckets but with clamping versatility.

W 279-5382 BUCKET-MP, BASE EDGE, 60" 806 $3,960 NI...........................(BCP Product).39 CYD / 10.5 CFT (.30 CUM) Heaped CapacityIncludes - Base Edge with drilled mounting holesRecommended for use with C-Series machines

W 279-5381 BUCKET-MP, BOCE, 60" 806 $4,126 NI...............................(BCP Product).39 CYD / 10.5 CFT (.30 CUM) Heaped CapacityIncludes - Bolt-on cutting edge, 1 Piece

W 279-5380 BUCKET-MP, BOT 60" 806 $4,363 NI.................................(BCP Product).39 CYD / 10.5 CFT (.30 CUM) Heaped CapacityIncludes - 8 Single Strap Bolt-on UniteethRecommended for use with C-Series machines

W 279-5390 BUCKET-MP, BASE EDGE 66" 856 $4,140 NI...........................(BCP Product).44 CYD / 12 CFT (.34 CUM) Heaped CapacityIncludes - Base Edge with drilled mounting holes

W 279-5391 BUCKET-MP, W/BO EDGE 66" 856 $4,325 NI...........................(BCP Product).44 CYD / 12 CFT (.34 CUM) Heaped CapacityIncludes - Bolt-on cutting edge, 1 Piece

W 279-5392 BUCKET-MP, BOT 66" 856 $4,546 NI.................................(BCP Product).44 CYD / 12 CFT (.34 CUM) Heaped CapacityIncludes - 8 Single Strap Bolt-on UniteethRecommended for use with C-Series machines

W 279-5398 BUCKET-MP, BASE EDGE 72" 905 $4,656 NI...........................(BCP Product).48 CYD / 13.1 CFT (.37 CUM) Heaped CapacityIncludes - Base Edge with drilled mounting holesRecommended for use with C-Series machines

W 279-5399 BUCKET-MP, BOCE 72" 905 $4,868 NI................................(BCP Product).48 CYD / 13.1 CFT (.37 CUM) Heaped CapacityIncludes - Bolt-on cutting edge, 1 Piece

W 279-5400 BUCKET-MP, BOT 72" 905 $5,058 NI.................................(BCP Product).48 CYD / 13.1 CFT (.37 CUM) Heaped CapacityIncludes - 8 Single Strap Bolt-on Uniteeth

W 279-5403 BUCKET-MP, BASE EDGE 78" 954 $4,989 NI...........................(BCP Product).52 CYD / 14.1 CFT (.40 CUM) Heaped CapacityIncludes - Base Edge with drilled mounting holes






BUCKETS (Cont.)

W 279-5402 BUCKET-MP, BOCE 78" 954 $5,197 NI................................(BCP Product).52 CYD / 14.1 CFT (.40 CUM) Heaped CapacityIncludes - Bolt-on cutting edge, 1 Piece


W 293-0139 BUCKET-MP, BASE EDGE 84" 915 $5,340 NI...........................(BCP Product).56 CYD / 15.2 CFT (.43 CUM) Heaped CapacityIncludes - Base Edge with drilled mounting holes

W 296-8057 BUCKET-MP, BOCE 84" 1,003 $5,560 NI..............................(BCP Product).56 CYD / 15.2 CFT (.43 CUM) Heaped CapacityIncludes - Bolt-on cutting edge, 1 Piece







BUCKETS (Cont.)

UTILITY BUCKETS

Higher capacity buckets. For landscaping and agricultural workrequiring grading, leveling, and stockpiling material.

W 285-6096 BUCKET-UT, BASE EDGE 60" 531 $1,083 NI............................(BCP Product).56 CYD / 15.1 CFT (.43 CUM) Heaped CapacityIncludes - Base Edge with drilled mounting holesRecommended for use with C-Series machines

W 285-6095 BUCKET-UT, BOCE 60" 531 $1,278 NI................................(BCP Product).56 CYD / 15.1 CFT (.43 CUM) Heaped CapacityIncludes - Bolt-on cutting edge, 1 PieceRecommended for use with C-Series machines

W 285-6099 BUCKET-UT, BASE EDGE 66" 569 $1,343 NI............................(BCP Product).62 CYD / 16.5 CFT (.48 CUM) Heaped CapacityIncludes - Base Edge with drilled mounting holesRecommended for use with C-Series machines

W 285-6100 BUCKET-UT, BOCE 66" 569 $1,514 NI................................(BCP Product).62 CYD / 16.5 CFT (.48 CUM) Heaped CapacityIncludes - Bolt-on cutting edge, 1 Piece

W 285-6102 BUCKET-UT, BASE EDGE 72" 607 $1,547 NI............................(BCP Product).67 CYD / 17.8 CFT (.52 CUM) Heaped CapacityIncludes - Base Edge with drilled mounting holes

W 285-6101 BUCKET-UT, BOCE 72" 607 $1,742 NI................................(BCP Product).67 CYD / 17.8 CFT (.52 CUM) Heaped CapacityIncludes - Bolt-on cutting edge, 1 Piece






BUCKETS (Cont.)

NOTE: Available through Parts only- NO BRIDGE ORDERS------------------------------------------------BOLT-ON TOOTH BARS :

Series I - Toothbars for use with General Purpose and Multi Purposebuckets with bare base edges.

136-8734 For use with: 60" GP or MP BucketsIncludes 7 uniteeth





Series II - Toothbars for use with General Purpose and Multi Purposebuckets fitted with bolt-n cutting edges.





264-2084 For use with: 84" HC or MP BucketsIncludes 8 uniteeth

Required Mounting Hardware for Series I andand Series II Toothbars:2J3507-Nut 2 pcs.3B4516-Lockwasher 2 pcs.5P8250-Washer 2 pcs.8S9093-Bolt 2 pcs.






COLD PLANERS

CAT Cold Planers are designed for small to medium size paving jobs inresidential and commercial applications. Cold planers are used toeconomically restore asphalt and concrete paved surfaces to aspecified grade or level. They are ideal for milling bumps orimperfections in expanded pavements, removing cracked or deterioratedpavement, removing traffic lane stripes and working on jobs whereweight restrictions limit the use of dedicated planers.

www.cat.com/coldplaners

W 381-8300 COLD PLANER, PC104B 1,474 $12,851 NI..............................(BCP Product)REQUIRES: Standard Flow Hydraulics14" (350mm) drum width - 42 all purpose conical bits68" (1720mm) overall widthHydraulic SideshiftManual tilt and depthIncludes DIRECT drive unit with 6" (150mm) maximum depth of cut,hydraulic lines with quick disconnects,mounting bracket and hardware.

W 224-7396 COLD PLANER, PC203 1,433 $13,457 NI...............................(BCP Product)REQUIRES: Standard Flow Hydraulics14" (350mm) drum width - 42 all purpose conical bits68" (1720mm) overall widthHydraulic SideshiftManual tilt and depthIncludes DIRECT drive unit with 6" (150mm) maximum depth of cut,

hydraulic lines with quick disconnects,mounting bracket and hardware.

W 224-7395 PC204 COLD PLANER 1,521 $16,089 NI...............................(BCP Product)REQUIRES: Standard Flow Hydraulics18" (450mm) drum width - 48 all purpose conical bits68" (1720mm) overall widthSelf-LevelingIndependent left/right depth controlHydraulic SideshiftSpring TiltIncludes DIRECT drive unit with 6" (150mm) maximum depth of cut,

hydraulic lines with quick disconnects,mounting brackets and hardware.






COLD PLANERS (Cont.)

W 381-8310 PC205B COLD PLANER 1,610 $16,193 NI..............................(BCP Product)REQUIRES: High Flow Hydraulics or Standard Flow Hydraulics with casedrain kit18" (450mm) drum width - 48 all purpose conical bits68" (1720mm) overall widthSelf levelingIndependent left/right depth controlHydraulic SideshiftSpring tiltIncludes PLANETARY drive unit with 6" (150mm) maximum depth of cut,hydraulic lines with quick disconnects,mounting brackets and hardware.

W 246-7315 COLD PLANER, PC205 1,654 $17,765 NI...............................(BCP Product)Requires: Left Joystick to be WT Deluxe and Right Joystickto be Hydraulic Proportional.REQUIRES: High Flow Hydraulics18" (450mm) drum width - 48 all purpose conical bits68" (1720mm) overall widthSelf levelingElectro-Hydraulic Independent left/right depth controlElectro-Hydraulic SideshiftElectro-hydraulic tiltIncludes PLANETARY drive unit with 6" (150mm) maximum depth of cut,

hydraulic lines with quick disconnects,mounting bracket and hardware.

W 246-7314 COLD PLANER, PC206 1,998 $21,981 NI...............................(BCP Product)Requires: Left Joystick to be WT Deluxe and Right Joystickto be Hydraulic Proportional.REQUIRES: High Flow XPS Hydraulics24" (600mm) drum width - 60 all purpose conical bits68" (1720mm) overall widthSelf-LevelingElectro-Hydraulic Independent left/right depth controlElectro-Hydraulic SideshiftElectro-Hydraulic TiltIncludes PLANETARY drive unit with 7" (170mm) maximum depth of cut,








W 246-7313 COLD PLANER, PC210 2,381 $28,801 NI...............................(BCP Product)Requires: Left Joystick to be WT Deluxe and Right Joystickto be Hydraulic Proportional.REQUIRES: High Flow XPS Hydraulics40" (1000mm) drum width - 78 all purpose conical bits68" (1720mm) overall widthSelf LevelingElectro-Hydraulic Independent left/right depth controlElectro-Hydraulic SideshiftElectro-Hydraulic TiltIncludes 2 PLANETARY drive unit with 5" (130mm) maximum depth of cut,


W 381-8330 COLD PLANER, PC306B 2,061 $22,569 NI..............................(BCP Product)REQUIRES: Left joystick WT Deluxe, right joystick Hydraulic ProportionREQUIRES: High Flow or High Flow XPS Hydraulics24" (600mm) drum width - 60 all purpose conical bits73" (1858mm) overall widthSelf LevelingElectro-Hydraulic independent left/right depth controlElectro-Hydraulic sideshiftElectro-Hydraulic tiltCold Planer mounted switch to enable float or tilt controlIncludes PLANETARY drive unit with 7" (170mm) maximum depth of cut,hydraulic lines with 1/2" quick disconnects, case drain line and 14pin electrical harness, mounting brackets, and hardware.Recommend use with AMICS

W 381-8360 COLD PLANER, PC310B 2,315 $29,583 NI..............................(BCP Product)REQUIRES: Left joystick WT Deluxe, right joystick Hydraulic ProportionREQUIRES: High Flow XPS Hydraulics40" (1000mm) drum width - 78 all purpose conical bits73" (1858mm) overall widthSelf LevelingElectro-Hydraulic independent left/right depth controlElectro-Hydraulic sideshiftElectro-Hydraulic tiltCold Planer mounted switch to enable float or tilt controlIncludes 2 PLANETARY drive units with 5" (130mm) maximum depth of cut,hydraulic lines with 1/2" quick disconnects, case drain line and14 pin electrical harness, mounting brackets, and hardware.







W 381-8350 COLD PLANER, PC408B 2,290 $24,985 NI.............................(BCP Product)Requires: Left Joystick to be WT Deluxe and Right Joystick to beHydraulic ProportionalREQUIRES: XHP Hydraulics30" (750mm) drum width - 60 extreme duty all purpose bits73" (1860mm) overall widthSelf LevelingElectro-Hydraulic Independent left/right depth controlElectro-Hydraulic SideshiftElectro-Hydraulic TiltFloat-Tilt SwitchMax Pro Pressure GaugeExtreme Duty BitsIncludes 2 PLANETARY drive units with 7" (170mm) maximum depth of cut,hydraulic lines with 3/4" quick disconnects, case drain line and14 pin electrical harness, mounting brackets and hardware.

W 381-8370 COLD PLANER, PC412B 2,575 $32,100 NI..............................(BCP Product)Requires: Left Joystick to be WT Deluxe and Right Joystick to beHydraulic ProportionalREQUIRES: XHP Hydraulics47" (1200mm) drum width - 90 extreme duty all purpose bits73" (1860mm) overall widthSelf LevelingElectro-Hydraulic Independent left/right depth controlElectro-Hydraulic SideshiftElectro-Hydraulic TiltFloat-Tilt SwitchMax Pro Pressure GaugeExtreme Duty BitsIncludes 2 PLANETARY drive units with 5" (130mm) maximun depth of cut,hydraulic lines with 3/4" quick disconnects, case drain line and14 pin electrical harness, mounting brackets and hardware.

COLD PLANER OPTIONS

W 206-2567 KIT, WATER SPRINKLER 10 $311 NI.................................(BCP Product)Work tool water sprinkling kit complete with sprinkler heads (4),hoses, mounting hardware and quick disconnects for effectivedust control.REQUIRES: Control, Work Tool, Electrical

(Order with machine )Water Tank, Machine(Reference Machine Attachments section ofthis price list to order )

FOR USE WITH: PC3







W 231-2590 KIT, WATER SPRINKLER 22 $200 NI.................................(BCP Product)Work tool water sprinkling kit complete with sprinkler heads (2),hoses, mounting hardware and quick disconnects for effectivedust control.REQUIRES: Control Work Tool, Electrical

(order with machine)Water Tank, Machine

(reference Machine Attachments section ofthis price list to order)

FOR USE WITH: PC203, PC204, or PC205

W 231-2591 KIT, WATER SPRINKLER 24 $244 NI.................................(BCP Product)Work tool water sprinkling kit complete with sprinkler heads (3),hoses, mounting hardware and quick disconnects for effectivedust control.REQUIRES: Control Work Tool, Electrical



FOR USE WITH: PC206

W 231-2592 KIT, WATER SPRINKLER 26 $294 NI.................................(BCP Product)Work tool water sprinkling kit complete with sprinkler heads (4),hoses, mounting hardware and quick disconnects for effectivedust control.REQUIRES: Control, Work Tool, Electrical



FOR USE WITH: PC210







Available through Parts - NO BRIDGE ORDERS-------------------------------------------------------------------Replacement Conical Drum bits and holders for PC203, PC204,PC205, PC206 and PC210:

222-7571 All Purpose bit (asphalt & concrete)227-7340 Concrete bit226-9308 Block Holder for bit

PC203 / PC204 / PC205

Cut Cut Depth Number ofWidth Max / Min Conical Bits~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

231-2572 Drum, Optional, 3" 8" / 2" 24231-2573 Drum, Optional, 6" 8" / 2" 24231-2574 Drum, Optional, 8" 8" / 2" 36231-2575 Drum, Optional, 12" 8" / 2" 42231-2576 Drum, Optional, 14" 8" / 2" 42231-2577 Drum, Optional, 16" 6" / 0" 48224-7360 Drum, Optional, 18" 6" / 0" 48231-2579 Drum, Concrete, 18" 6" / 0" 66

PC206

231-2580 Drum, Optional, 3" 8" / 2" 24231-2581 Drum, Optional, 6" 8" / 2" 28231-2582 Drum, Optional, 8" 8" / 2" 36231-2583 Drum, Optional, 12" 8" / 2" 42231-2584 Drum, Optional, 14" 8" / 2" 42231-2585 Drum, Optional, 16" 8" / 2" 48231-2586 Drum, Optional, 18" 8" / 2" 48231-2587 Drum, Concrete, 18" 8" / 1" 66224-7384 Drum, Optional, 24" 7" / 0" 60231-2588 Drum, Concrete, 24 7" / 0" 78

COMPACTORS

VIBRATORY COMPACTORS






COMPACTORS (Cont.)

W 231-8600 VIBRATORY COMPACTOR, CV16B 2,174 $12,171 NI......................(BCP Product)REQUIRES: Standard Flow Hydraulics73" (1855mm) overall width66" (1676mm) drum width24" (610mm) Diameter SMOOTH drum designDrum Frequency - 2946 vpm @ max flowDynamic (centrifugal) Force - 11,903 lb (5399 kg)Spring loaded dual-direction non-metallic scraper barIncludes DIRECT drive unit, hydraulic lines with quick

disconnects, mounting bracket and hardware

W 231-8601 VIBRATORY COMPACTOR, CV18B 2,260 $13,051 NI......................(BCP Product)REQUIRES: Standard Flow Hydraulics80" (2032mm) overall width73" (1854mm) drum width24" (610mm) diameter SMOOTH drum designDrum Frequency - 2946 vpm @ max flowDynamic (centrifugal) Force - 11,903 lb (5399 kg)Spring loaded dual-direction non-metallic scraper barIncludes DIRECT drive unit, hydraulic lines with quick


CONVERSION KITS

Conversion kits are available to convert work tools to function onthe new B3 High Flow and D Series machines (not for C2 machines).

The secondary auxiliary circuits are moving from the machine to thework tool. The following kits provide the Bill of Material for thechange. Please consult the list below for the required work toolconversion kit.

The work tool interface for B3 High Flow and D Series machinesconsists of two 1/2" Quick Disconnects (QD), case drain line and14 pin electrical connector. These hydraulic lines provide flow forstandard flow, high flow (HF) and High Flow XPS (HF XPS), based on themachine configuration.

The SSL/CTL D XHP work tool interface consists of two 3/4" Quickdisconnects, case drain line and 14 pin electrical connector. Thesehydraulic lines provide standard flow, high flow XPS and XHP flow,based on the machine configuration. Please review the marketingbulletin explaining the conversion process. It is located atdealer.cat.com under the SSL/CTL machines section.






CONVERSION KITS (Cont.)

Compatibility Guide arranged by modelModel B3 HF/D Series XHPA14B, A19B Not Required 382-6184A26B 382-6152 382-6190BA18 (Manual Angle) Not Required 382-6184BA18 (Hydraulic Angle) 375-6445 382-6187BH27/BH30/BH30W Not Required 382-6184Angle Blade Not Required 382-6181Dozer Blades 375-6445 382-6185BP15B, BP18B Not Required 382-6184BR160, BR166, BR172 Not Required 382-6186BR272, BR378 382-6193 382-6190BU115, BU118 Not Required 382-6184Grapple Rakes Not Required 382-6181Hammers Not Required 382-6183HM312, HM315 382-6180 382-6180 & 382-6192Industrial Grapple Buckets Not Required 382-6181LR15B, LR18B Not Required 382-6184LT13B, LT18B Not Required 382-6184

MP Buckets Not Required 382-6181PR172, PR184, PR184

(Manual Angle) 382-6184 382-6184(Hydraulic Angle) 375-6445 382-6185

SR117, SR118, SR121S/N WSG00274/SNB00246/ SNR00241 and below

375-6445 382-6189S/N WSG00275/SNB00247/ SNR00242 and above

375-6445 382-6185S305 375-6445 382-6188SG16B 375-6445 382-6185SG18B 382-6170 382-6170 & 382-6192SR318, SR321 382-6151 382-6189PC203, PC204 Not Required 382-6184PC205, PC206, PC210 379-0420 379-0420 & 382-6192SW45, SW60 379-0420 379-0420 & 382-6192T6B, T9B Not Required 382-6184T15B 382-6160 382-6160 & 382-6192Utility Grapple Forks Not Required 382-6181Utility Grapple Buckets Not Required 382-6181

FORKS

PALLET FORK CARRIAGE

W 351-9371 CARRIAGE, 46" 207 $622 NI......................................(BCP Product)Standard Hook CarriageDoes Not Include Fork TinesOverall Carriage width with step, 50" (1270mm)






FORKS (Cont.)

W 353-1693 CARRIAGES, 6 PER SKID 1,242 $3,400 NI.............................(BCP Product)6 pcs. of 3519371 Carriage

PALLET FORK TINES

W 195-6943 PALLET FORK, 1.5" X 4" X 36" 92 $169 NI...........................(BCP Product)Order quantity of 2 for a pair.

W 243-0001 TINE, FORK 12 PCS., 36" 1,104 $1,851 NI............................(BCP Product)12 pcs. of 1956943 Forks

W 195-6942 FORK, PALLET 1.5" X 4" X 42" 104 $193 NI.........................(BCP Product)Order quantity of 2 for a pair.


W 195-8545 FORK, PALLET 1.5" X 4" X 48" 114 $225 NI..........................(BCP Product)Order quantity of 2 for a pair.


CARRIAGE WITH ASSEMBLED TINES

W 353-1694 FORKS, 36" PALLET W/ CARRIAGE 391 $1,007 NI.......................(BCP Product)Includes 1 pc. of 3519371 carriage and 2 pcs. of 1956943 forks



INDUSTRIAL GRAPPLE FORKS

W 279-5350 FORKS, INDUSTRIAL GRAPPLE, 66" 1,106 $5,963 NI.....................(BCP Product)66" (1676mm) WideIncludes - two cylinders, two heavy duty grapple assemblies,

and NINE round fork tines.






FORKS (Cont.)

W 279-5360 FORKS, INDUSTRIAL GRAPPLE, 72" 1,208 $7,115 NI.....................(BCP Product)72" (1829mm) WideIncludes - two cylinders, two heavy duty grapple assemblies,and ELEVEN round fork tines.






FORKS (Cont.)

UTILITY GRAPPLE FORKS

W 285-6114 FORKS, UTILITY GRAPPLE, 66" 671 $2,501 NI..........................(BCP Product)66" (1676mm) wideIncludes - one cylinder, one grapple assembly,and SEVEN round fork tines

W 285-6115 FORKS, UTILITY GRAPPLE, 72" 719 $2,653 NI..........................(BCP Product)72" (1829mm) wideIncludes - one cylinder, one grapple assembly,and NINE round fork tines

UTILITY FORKS

Light duty design, for agriculture and landscaping applications, fortransporting small bales, removing dry compacted livestock waste,loosening of bedding materials and soil aeration.

W 165-8736 FORKS, UTILITY, 66" 430 $1,019 NI.................................(BCP Product)66" (1676 mm) WideIncludes Carriage and SEVEN Round Fork Tines.

W 285-6105 FORKS, UTILITY, 66" 437 $1,026 NI.................................(BCP Product)66" (1676mm) wideIncludes carriage and SEVEN round fork tines.Recommended for use with C-Series machines

W 165-8737 FORKS, UTILITY, 72" 500 $1,165 NI.................................(BCP Product)72" (1829 mm) WideIncludes Carriage and NINE Round Fork Tines.

W 285-6110 FORKS, UTILITY, 72" 484 $1,178 NI.................................(BCP Product)72" (1829mm) wideIncludes carriage and NINE round fork tines.Recommended for use with C-Series machines

GRAPPLES

INDUSTRIAL GRAPPLE BUCKETS

Heavy duty design to handle a wide array of bulky, irregularly shapedobjects encountered in demolition, industrial, construction, recyclingand other aggressive applications.






GRAPPLES (Cont.)

W 157-7223 BUCKET, IND. GRAP, 60" BASE 959 $4,339 NI..........................(BCP Product)Includes - Base Edge with drilled mounting holes,two cylinders and two heavy duty grapple assemblies

W 157-7226 BUCKET, IND. GRAP, 60" BOCE 1,045 $4,517 NI........................(BCP Product)Includes - Bolt-on cutting edge, 1 Piece,two cylinders and two heavy duty grapple assemblies

W 157-7224 BUCKET, IND. GRAP, 66" BASE 988 $4,551 NI..........................(BCP Product)Includes - Base Edge with drilled mounting holes,two cylinders and two heavy duty grapple assemblies


W 157-7225 BUCKET, IND. GRAP, 72" BASE 1,019 $5,088 NI........................(BCP Product)Includes - Base Edge with Drilled Mounting Holes,two cylinders and two heavy duty grapple assemblies


W 217-6229 BUCKET, IND GRAP 78" BASE 1,056 $5,625 NI.........................(BCP Product)Includes - Base Edge with drilled mounting holes,two cylinders and two heavy Duty grapple assemblies

W 217-6230 BUCKET, IND. GRAP, 78" BOCE 1,142 $5,838 NI........................(BCP Product)Includes - Bolt-on cutting edge, 1 Piece,two Cylinders and two heavy duty grapple assemblies






GRAPPLES (Cont.)

INDUSTRIAL GRAPPLE RAKES

Heavy duty design with verticle tines to handle a wide array ofirregularly shaped objects encountered in land clearing, industrial,construction, recycling and other aggressive applications.

W 286-9300 RAKE, IND. GRAPPLE, 72" 1,070 $4,026 NI............................(BCP Product)Includes two cylinders and two heavy duty grapple assemblies withNINE tines.

W 286-9301 RAKE, IND. GRAPPLE, 84" 1,115 $4,508 NI............................(BCP Product)Includes two cylinders and two heavy duty grapple assemblies withELEVEN tines.

UTILITY GRAPPLE BUCKETS

W 285-6111 BUCKET, UTILITY GRAPPLE, 66" 803 $3,092 NI.........................(BCP Product)66" (1676mm) wideIncludes Bolt-on cutting edge, 1 Piece,one cylinder with one grapple assembly

W 285-6112 BUCKET, UTILITY GRAPPLE 72" 841 $3,338 NI..........................(BCP Product)72" (1829mm) wideIncludes Bolt-on cutting edge, 1 Piece,one cylinder with one grapple assembly

UTILITY GRAPPLE GROUP

Not installed; fits onto Utility Forks or Utility Bucket.

W 165-8734 GRAPPLE, UTILITY 210 $1,531 NI....................................(BCP Product)One Cylinder, one grapple assemblyIncludes - hydraulic lines with quick disconnects andmounting hardware

HAMMERS

When ordering Hammers, use the Hammer Price List. Hammers cannot beordered using 0P-0096.






LANDSCAPE RAKES

W 224-9220 LANDSCAPE RAKE, LR15B 1,309 $7,856 NI............................(BCP Product)REQUIRES: Standard Flow Hydraulics66" (1676mm) overall width62" (1576mm) working width55" (1397mm) raking widthRake bars on conveyer chainsPoppet valve contolled circuitryIncludes - CHAIN drive unit, hydraulic lines with quick

disconnects, mounting bracket and hardwareW 224-9221 LANDSCAPE RAKE, LR18B 1,437 $8,557 NI............................

(BCP Product)REQUIRES: Standard Flow Hydraulics76" (1930mm) overall width74" (1880mm) working width67" (1702mm) raking widthRake bars on conveyer chainsPoppet valve controlled circuitryIncludes - CHAIN drive unit, hydraulic lines with quick


LANDSCAPE TILLERS

W 219-7165 LANDSCAPE TILLER, LT13B 907 $6,018 NI.............................(BCP Product)REQUIRES: Standard Flow Hydraulics68" (1727mm) overall width, offset to cover right side tire52" (1321mm) working width24 Bi-Rotational hardened tinesBi-Directional Hydraulic MotorIncludes - DIRECT drive unit, 6" (152mm) maximum working depth,

hydraulic lines with quick disconnects, mounting bracketand hardware

W 219-0426 LANDSCAPE TILLER, LT18B 735 $7,243 NI.............................(BCP Product)REQUIRES: Standard Flow Hydraulics86" (2184mm) overall width73" (1854mm) working width36 Bi-Rotational hardened tinesBi-Directional Hydraulic MotorIncludes - DIRECT drive unit, 6" (152mm) maximum working depth,

hydraulic lines with quick disconnects, mounting bracketand hardware






MACHINE ATTACHMENTS

MACHINE WATER TANKS

Control, Work Tool, and Electrical also REQUIRED for operationof machine water tank and any work tool sprinkler kit. (Orderwith machine)

W 346-1834 TANK, WATER, B-SERIES MACHINES 164 $1,779 NI......................(BCP Product)Mounted to top of cab42 gallon capacityIncludes tank, pump, filter, lines, mounting brackets andquick disconnectFOR USE WITH: A- and B-series machinesWater Sprinkler Kit: Angle Broom

Pick Up BroomUtility BroomCold Planer

INCLUDES: Harness for use with B3 high flow machinesW 346-1833 TANK, WATER, C-SERIES MACHINES 141 $1,779 NI......................

(BCP Product)Mounted to top of cab42 gallon capacityIncludes tank, pump, filter, lines, mounting brackets andquick disconnectFOR USE WITH: C-series machinesWater Sprinkler Kit: Angle Broom

Pick Up BroomUtility BroomCold Planer

MATERIAL HANDLING ARM

The all purpose Material Handling Arm is a useful work tool forvirtually all types of applications; including industrial,construction, and agriculture. The heavy duty design is also idealfor landscaping to load, carry, and set trees and large shrubs.Designed for two person operation.






MATERIAL HANDLING ARM (Cont.)

W 216-8756 ARM, MATERIAL HANDLING 280 $1,690 NI............................(BCP Product)Lift Capacity : Maximum 2000 lbs.

( not to exceed rated load capacity of machine )Overall Width, with step, 52" (1319mm)Maximum horizontal reach 84" (2135mm)Maximum vertical reach 53" (1357mm)Single bent boom design with heavy duty clasped hookTwo hook locations and easy access load tie down pointsTwo compartments for chains and hooks

One person operation REQUIRES center mounted step(step and hardware available through Parts, see below)

Available through Parts - NO Bridge OrdersNote:Optional Step-Assembly for One-Person Operation:Part # Description Qty------ ----------- ---188-7176 Step Assembly 18T-4121 Washer 68T-4133 Nut 68T-4195 Bolt 6

MULCHER

NOTE: Engine Debris Kit and Turbo Debris Guard Kit are recommendedfor use in applications which create airborne debris, such as:mulching, brush cutting, paper recycling and certain agriculturepractices. Please refer to the machine price pages for part numbersunder: Field Installed Attachments Kit, Debris Barrier, Engine andKit, Turbo Debris Guard.

W 247-5900 MULCHER, HM312, CARBIDE TEETH 2,315 $22,694 NI....................(BCP Product)48" (1220mm) drum width - 28 fixed teeth65" (1650mm) overall width8" (200mm) Max cutting diameterV-belt drive

Includes: -Hydraulic lines with quick disconnect-Adjustable push/guard frame-Hydraulically operated front hood

Requires: -High Flow XPS Hydraulics-Door Gp-Polycarbonate-Guard, Manual Coupler 231-2578 (Qty two req'd)






MULCHER (Cont.)

W 308-0250 MULCHER, HM315, CARBIDE TEETH 2,365 $30,246 NI....................(BCP Product)57" (1448mm) drum width - 34 fixed teeth72" (1829mm) overall width8" (200mm) Max cutting diameterPolychain belt driveFor use in hardwood applications



W 327-3942 MULCHER, HM315, CHISEL TEETH 2,380 $30,246 NI......................(BCP Product)57" (1448mm) drum width - 34 fixed teeth72" (1829mm) overall width8" (200mm) Max cutting diameterV-belt driveFor use in vine and softwood applications



MULCHER OPTIONS

W 231-2578 GUARD, MANUAL COUPLER 7 $58 NI...............................(BCP Product)Required if used in conjunction with machine that has manual coupler.Protects manual levers from debris damage. Two required per machine.







MULCHER (Cont.)

NOTE: To order a complete set of teeth, please order28 pieces for an HM312 and 34 pieces for an HM315.

2475913 TOOTH, CARBIDE; Recommended for hardwoods2475914 TOOTH, CARBIDE, SEVERE DUTY; Recommended for hardwoods3080221 TOOTH, CHISEL; INCLUDES: 308-0222 Insert3080222 INSERT GROUP, CHISEL; Replacement insert for 308-0221Recommended for vines and softwoods

POWER BOX RAKES

W 276-4405 POWER BOX RAKE-HYDRAULIC,PR172 925 $9,671 NI.....................(BCP Product)72" (1829mm) working width81" (2057mm) overall widthRequires: Standard Flow hydraulicsRequires: Control, work tool, electricalHydraulic angling +/- 20 degrees

W 276-4415 POWER BOX RAKE-HYDRAULIC,PR184 1,050 $10,226 NI...................(BCP Product)84" (2134mm) working width93" (2362mm) overall widthRequires: Standard Flow hydraulicsRequires: Control, work tool, electricalHydraulic angling +/- 20 degrees

W 276-4425 POWER BOX RAKE-HYDRAULIC,PR190 1,320 $11,029 NI...................(BCP Product)90" (2286mm) working width99" (2515mm) overall widthRequires: Standard Flow hydraulicsRequires: Control, work tool, electricalHydraulic angling +/- 20 degrees

W 277-8210 POWER BOX RAKE-MANUAL, PR172 900 $9,272 NI.......................(BCP Product)72" (1829mm) working width81" (2057mm) overall widthRequires: Standard Flow hydraulicsManual angling +/- 20 degrees

W 277-8215 POWER BOX RAKE-MANUAL, PR184 1,026 $9,597 NI....................(BCP Product)84" (2134mm) working width93" (2362mm) overall widthRequires: Standard Flow hydraulicsManual angling +/- 20 degrees






POWER BOX RAKES (Cont.)

W 277-8220 POWER BOX RAKE-MANUAL, PR190 1,296 $10,439 NI.....................(BCP Product)90" (2286mm) working width99" (2515mm) overall widthRequires: Standard Flow hydraulicsManual angling +/- 20 degrees






SAWS

REQUIRED: Machine Counterweights for 228: 158-9940

WHEEL SAWS

W 246-7308 WHEEL SAW, SW45, 3" 2,294 $22,683 NI.............................(BCP Product)Requires: Left Joystick to be WT Deluxe and Right Joystickto be Hydraulic Proportional.REQUIRES: High Flow Hydraulics and Control, work tool, electrical.REQUIRES: Machine Counterweights: 185-99413" (80mm) Wheel Width 64 Concrete Conical Bits18" (450mm) Dig DepthIncludes hydraulic sideshift, hydraulic lines with quick disconnects,mounting bracket and hardware.Note: Cannot be used with trench cleaning device.

W 246-7309 SW45 WHEEL SAW, 6" 2,125 $26,076 NI.............................(BCP Product)Requires: Left Joystick to be WT Deluxe and Right Joystickto be Hydraulic Proportional.REQUIRES: High Flow Hydraulics and Control, work tool, electrical.REQUIRES: Machine Counterweights: 185-99416" (160mm) Wheel Width 56 Concrete Conical Bits.18" (450mm) Dig DepthIncludes trench cleaning device, hydraulic sideshift, hydrauliclines with quick disconnects, mounting bracket, and hardware.

W 246-7310 WHEEL SAW, SW45, 8" 2,198 $26,978 NI............................(BCP Product)Requires: Left Joystick to be WT Deluxe and Right Joystickto be Hydraulic Proportional.REQUIRES: High Flow Hydraulics8" (200mm) Wheel Width 96 Concrete Conical Bits.17" (450mm) Dig DepthIncludes trench cleaning device, hydraulic sideshift, hydraulic lineswith quick disconnects, mounting bracket and hardware.

W 246-7311 WHEEL SAW, SW60, 6" 2,537 $30,282 NI.............................(BCP Product)Requires: Left Joystick to be WT Deluxe and Right Joystickto be Hydraulic Proportional.REQUIRES: High Flow Hydraulics and Control, work tool, electrical.6" (160mm) Wheel Width 96 Concrete Conical Bits.24" (600mm) Dig DepthIncludes trench cleaning device, hydraulic sideshift, hydraulic lineswith quick disconnects, mounting bracket and hardware.REQUIRED: Machine Counterweights: 185-9941Recommend: Heavy-Duty tire fitment.






SAWS (Cont.)

W 246-7312 WHEEL SAW, SW60, 8" 2,575 $31,464 NI.............................(BCP Product)Requires: Left Joystick to be WT Deluxe and Right Joystickto be Hydraulic Proportional.REQUIRES: High Flow Hydraulics and Control, work tool, electrical.REQUIRES: Machine Counterweights: 185-99418" (200mm) Wheel Width 96 Concrete Conical Bits.24" (600mm) Dig DepthIncludes trench cleaning device, hydraulic sideshift, hydraulic lineswith quick disconnects, mounting bracket and hardware.

Replacement Conical Drum bits and holders for all Wheelsaws:222-7571 All Purpose bit (asphalt & concrete)227-7340 Concrete Bit226-9308 Block Holder for bit219-5464 SW45 Wide Deflector RHS and Discharge Blanking Plates Kit230-7025 SW60 Discharge Blanking Plates Kit

Recommendation: An inventory holding of at least 100 of each tipis advised.

SHEARS

Standard S305 Equipment includes 360 degrees rotatable tool,speed valve for faster jaw closing, removable and reversiblecutters, and easy cutting-tolerance adjustment.

W 171-5557 S305 HYDRAULIC SCRAP SHEAR 1,544 $34,061 NI.......................Lane 1 Work Tool - Ships loose from Caterpillar Work Tool & Services(CWTS PRODUCT)INCLUDES: 171-5495 S305 HYDRAULIC SCRAP SHEAR

171-5558 Mounting bracket171-5565 Line, connecting

FOR USE WITH: Skid Steers 232, 236, 242, 246, 248, 252,256, 262, 272, 279, 289

SSL must be equipped with the work tool electrical control group

SNOW BLOWERS

Hydraulic operated direct drive, reversible auger and impeller, andnon-binding 180 degree rotating chute and deflector.






SNOW BLOWERS (Cont.)

NOTE: Operator protection against flying objects REQUIRED.If not ordered with machine; Door, Cab, Polycarbonate shouldbe ordered. Please see machine price list for availability.

W 286-0724 SNOW BLOWER, SR117, 67" 890 $8,008 NI...........................(BCP Product)70" (1778mm) overall width67" (1702mm) working width30' (9.1m) throwing distanceMachine joystick control of chute and deflectorREQUIRES: 60 LPM Standard Flow Hydraulics andControl, Work Tool, Electrical. Not compatible with 80 LPM.

W 286-0725 SNOW BLOWER, SR118, 73" 990 $8,885 NI............................(BCP Product)76" (1930mm) Overall width73" (1854mm) Working width40' (12.2m) Throwing distanceMachine joystick control of chute and deflectorREQUIRES: Standard Flow Hydraulics and Control, Work Tool, Electrical

W 286-0726 SNOW BLOWER, SR121, 85" 1,220 $9,282 NI.........................(BCP Product)88" (2235mm) overall width85" (2159mm) working width40' (12.2m) throwing distanceMachine joystick control of chute and deflectorREQUIRES: Standard Flow Hydraulics and Control, Work Tool, Electrical

W 286-0727 SNOW BLOWER, SR318, 73" 990 $9,593 NI...........................(BCP Product)76" (1930mm) overall width73" (1854mm) working width45' (13.7m) throwing distanceMachine joystick control of chute and deflectorREQUIRES: High Flow Hydraulics and Control, Work Tool, Electrical

W 286-0728 SNOW BLOWER, SR321, 85" 1,220 $10,190 NI.........................(BCP Product) NEW UNITS AVAILABLE FALL 201188" (2235mm) Overall width85" (2159mm) Working width45' (13.7m) Throwing distanceMachine joystick control of chute and deflectorREQUIRES: High Flow Hydraulics and Control, Work Tool, Electrical






SNOW PUSHES

W 385-6401 SNOW PUSH, SSL, STD DTY 10' 1,700 $7,715 NI......................(BCP Product)126" (3200mm) Overall width121" (3061mm) Working width4 Moldboard Sections

W 385-6402 SNOW PUSH, SSL, STD DTY 12' 2,000 $8,207 NI......................(BCP Product)156" (3962mm) Overall width151" (3823mm) Working width5 Moldboard Sections

STUMP GRINDERS

W 248-5785 STUMP GRINDER, SG16B 834 $8,536 NI...............................(BCP Product)REQUIRES: Standard Flow Hydraulics46" (1175mm) overall width18" (457mm) diameter cutting wheel with 32 carbide teethMANUAL adjustable cutting headHydraulic controlled boom swing - 70 degree range of motionElectro-hydraulic controlled boom extension 11" (280mm)Includes DIRECT drive unit, hydraulic lines with quick

disconnects, mounting bracket and hardwareRequires: Left Joystick to be WT Deluxe and Right Joystickto be Hydraulic Proportional

W 246-1487 STUMP GRINDER, SG18B 880 $9,472 NI...............................(BCP Product)REQUIRES: High Flow Hydraulics and Control, work tool, electrical.46" (1175mm) overall width18" (457mm) diameter cutting wheel with 32 carbide teethHYDRAULIC adjustable cutting headHydraulic controlled boom swing - 70 degree range of motionElectro-hydraulic controlled boom extension 11" (280mm)Includes DIRECT drive unit, hydraulic lines with quick

disconnects, mounting bracket and hardware.REQUIRES: Kit #241-8673 for use with A-Series Machines






TRENCHERS

Includes DIRECT drive unit with one 18"(457mm) spoil auger - rightside, hydraulic lines with quick disconnects, mounting bracket andhardware.

W 253-9509 TRENCHER, T6B, MANUAL,NO CHAIN 861 $4,690 NI.....................(BCP Product)36" (914mm) BoomRequires: Standard flow hydraulicsNo chain included

W 261-4806 TRENCHER,T6B, MAN. 6" STANDARD 1,012 $5,229 NI...................(BCP Product)36" (914mm) BoomRequires: Standard flow hydraulics6" (152mm) cutting width; standard cup teeth indouble standard pattern

W 261-8557 TRENCHER,T6B, MAN. 8" STD 1,028 $5,360 NI........................(BCP Product)36" (914mm) BoomRequires: Standard flow hydraulics8" (203mm) cutting width; standard cup teeth indouble standard pattern

W 261-8559 TRENCHER, T6B, MAN. 6" COMBO 1,035 $5,494 NI.....................(BCP Product)36" (914mm) BoomRequires: Standard flow hydraulics6" (152mm) cutting width; 50/50 Carbide/Cup teeth indouble standard pattern

W 261-8561 TRENCHER, T6B,MAN 6" ROCKFROST 1,064 $5,763 NI...................(BCP Product)36" (914mm) BoomRequires: Standard flow hydraulics6" (152mm) cutting width; Rock/Frost teeth indouble standard pattern

W 261-8563 TRENCHER,T6B, MAN 6"TERMINATOR 1,012 $6,033 NI...................(BCP Product)36" (914mm) BoomRequires: Standard flow hydraulics6" (152mm) cutting width; flat-top chain &Terminator teeth in double standard pattern

W 256-0695 TRENCHER, T6B, HYD, NO CHAIN 925 $5,349 NI.......................(BCP Product)36" (914mm) Boom, hydraulic sideshift: 19" (483mm) bothleft and right of centerRequires: Standard flow hydraulicsNo chain included






TRENCHERS (Cont.)

W 261-4859 TRENCHER, T6B,HYD. 6" STANDARD 1,076 $5,886 NI...................(BCP Product)36" (914mm) BoomRequires: Standard flow hydraulics6" (152mm) cutting width; standard cup teeth indouble standard pattern

W 261-8558 TRENCHER, T6B, HYD. 8" STD 1,092 $6,018 NI........................(BCP Product)36" (914mm) BoomRequires: Standard flow hydraulics8" (203mm) cutting width; standard cup teeth indouble standard pattern

W 261-8560 TRENCHER, T6B, HYD 6" COMBO 1,099 $6,151 NI......................(BCP Product)36" (914mm) BoomRequires: Standard flow hydraulics6" (152mm) cutting width; 50/50 Carbide/Cup teeth indouble standard pattern

W 261-8562 TRENCHER, T6B,HYD 6" ROCKFROST 1,128 $6,421 NI...................(BCP Product)36" (914mm) BoomRequires: Standard flow hydraulics6" (152mm) cutting width; Rock/Frost teeth indouble standard pattern

W 261-8564 TRENCHER,T6B, HYD 6"TERMINATOR 1,076 $6,689 NI...................(BCP Product)36" (914mm) BoomRequires: Standard flow hydraulics6" (152mm) cutting width; flat-top chain &Terminator teeth in double standard pattern

W 208-2700 TRENCHER, T9B, MANUAL,NO CHAIN 973 $5,053 NI.....................(BCP Product)REQUIRES: Standard Flow HydraulicsMANUAL sideshift.48" (1219mm) Boom, NO CHAIN INCLUDED.

W 233-2346 TRENCHER, T9B,MAN. 6" STANDARD 1,076 $5,390 NI...................(BCP Product)REQUIRES: Standard Flow HydraulicsMANUAL sideshift.48" (1219mm) Boom, 6" (152mm) cutting width.

W 233-2350 TRENCHER, T9B, MAN. 6" COMBO 1,154 $7,193 NI.....................(BCP Product)REQUIRES: Standard Flow HydraulicsMANUAL sideshift.48" (1219mm) Boom, 6" (152mm) cutting width.Combo- 50/50 Carbide/Std Cup Chain.






TRENCHERS (Cont.)

W 241-4251 TRENCHER, T9B,MAN 6" ROCKFROST 1,184 $7,794 NI...................(BCP Product)REQUIRES: Standard Flow HydraulicsMANUAL sideshift.48" (1219mm) Boom, 6" (152mm) cutting width.

W 208-2708 TRENCHER, T9B, HYD, NO CHAIN 987 $5,726 NI.......................(BCP Product)REQUIRES: Standard Flow HydraulicsHYDRAULIC sideshift -- 22" (559mm) right of center.48" (1219mm) Boom, NO CHAIN INCLUDED.

W 241-4252 TRENCHER, T9B,HYD. 6" STANDARD 1,121 $5,974 NI...................(BCP Product)REQUIRES: Standard Flow HydraulicsHYDRAULIC sideshift -- 22" (559mm) right of center.48" (1219mm) Boom, 6" (152mm) cutting width.

W 241-4253 TRENCHER, T9B, HYD. 8" STD. 1,186 $6,758 NI........................(BCP Product)REQUIRES: Standard Flow HydraulicsHYDRAULIC sideshift -- 22" (559mm) right of center.48" (1219mm) Boom, 8" (202mm) cutting width.

W 241-4254 TRENCHER, T9B, HYD. 6" COMBO 1,199 $7,868 NI.....................(BCP Product)REQUIRES: Standard Flow HydraulicsHYDRAULIC sideshift -- 22" (559mm) right of center.48" (1219mm) Boom, 6" (152mm) cutting width.Combo - 50/50 Carbide/Std Cup Chain.

W 241-4255 TRENCHER, T9B,HYD 6" ROCKFROST 1,229 $8,278 NI...................(BCP Product)REQUIRES: Standard Flow HydraulicsHYDRAULIC sideshift -- 22" (559mm) right of center.48" (1219mm) Boom, 6" (152mm) cutting width.

W 246-1482 TRENCHER, T15B, HF, NO CHAIN 1,055 $8,449 NI......................(BCP Product)REQUIRES: High Flow HydraulicsHYDRAULIC sideshift -- 22" (559mm) right of center.60" (1524mm) Boom, NO CHAIN INCLUDED.

W 246-1483 TRENCHER, T15B, HF 6" STANDARD 1,212 $9,285 NI....................(BCP Product)REQUIRES: High Flow HydraulicsHYDRAULIC sideshift -- 22" (559mm) right of center.60" (1524mm) Boom, 6" (152mm) cutting width.

W 246-1484 TRENCHER, T15B, HF 8" STD. 1,287 $10,693 NI.........................(BCP Product)REQUIRES: High Flow HydraulicsHYDRAULIC sideshift -- 22" (559mm) right of center.60" (1524mm) Boom, 8" (202mm) cutting width.






TRENCHERS (Cont.)

W 246-1485 TRENCHER, T15B, HF COMBO 1,301 $12,624 NI.........................(BCP Product)REQUIRES: High Flow HydraulicsHYDRAULIC sideshift -- 22" (559mm) right of center.60" (1524mm) Boom, 6" (152mm) cutting width.Combo - 50/50 Carbide/Std Cup Chain.

TRENCHER OPTIONS

W 268-3271 CRUMBER ARM 36" 45 $290 NI....................................(BCP Product)FOR USE WITH T6B

W 264-7601 CRUMBER ARM 48" 49 $322 NI....................................(BCP Product)FOR USE WITH: T9 OR T9B

W 179-6313 CRUMBER ARM 60" 54 $344 NI....................................(BCP Product)FOR USE WITH: T15A OR T15B

W 264-7597 SHOE, CRUMBER ARM 6" - 8" 9 $103 NI.............................(BCP Product)FOR USE WITH ALL MODELS

W 264-7598 SHOE, CRUMBER ARM 10" - 12" 15 $111 NI..........................(BCP Product)FOR USE WITH ALL MODELS


For 36" Boom:Replacement Chain Assemblies259-0312 6" Standard Cup261-4860 6" Carbide/Cup261-4805 6" Rock/Frost243-6349 6" Terminator258-8644 8" Standard Cup

Replacement Tooth Groups263-3420 6" Standard Cup263-3421 8" Standard Cup263-3422 6" Carbide/Cup263-3423 8" Carbide/Cup263-3424 6" Rock/Frost263-3426 10" Standard263-3427 12" Standard






TRENCHERS (Cont.)


For 48" Boom:Replacement Chain Assemblies189-5956 6" Standard Cup222-7742 6" 50/50 Carbide/Cup208-2690 6" 50/50 Conical/Cup222-7743 6" Rock-Frost262-7624 6" Terminator222-7916 8" Standard Cup208-2694 8" 50/50 Carbide/Cup208-2693 8" 50/50 Conical/Cup208-2678 10" Standard Cup

Replacement Tooth Groups (48" Boom)166-0821 6" Single Standard194-4681 8" Double Standard194-4682 10" Double Standard195-3900 12" Double Standard208-2781 6" 50/50 Carbide208-2784 8" 50/50 Carbide208-2780 6" 50/50 Rock-Frost208-2783 8" 50/50 Rock-Frost208-2782 6" Rock-Frost


For 60" BoomReplacement Chain Assemblies189-5957 6" Standard Cup222-7747 6" 50/50 Carbide/Cup208-2695 6" 50/50 Conical/Cup208-2697 6" Rock-Frost262-7623 6" Terminator222-8523 8" Standard Cup208-2699 8" 50/50 Carbide/Cup208-2698 8" 50/50 Conical/Cup208-2679 10" Standard Cup

Replacement Tooth Groups (60" Boom)189-0702 6" Single Standard193-5727 8" Double Standard193-5728 10" Double Standard208-2791 6" 50/50 Carbide208-2794 8" 50/50 Carbide208-2790 6" 50/50 Rock-Frost208-2793 8" 50/50 Rock-Frost208-2792 6" Rock/Frost193-5729 12" Double Standard






KITS

W 296-0582 KIT, DEMO CONTROL HARNESS 2 $279 NI...........................(BCP Product)Enables Caterpillar dealers to quickly and easily demonstrate anelectronically controlled work tool on a machine that is notequipped with Control, Work Tool, Electrical.



price quote for: aftermarket tractor/skidsteer · pdf filecaterpillar: confidential green...

Documents