price list / order termsedge.rit.edu/content/p10010/public/pdf/linxtech_rf_pricelist.pdf · the...

WIRELESS MADE SIMPLE ®

PRICE LIST / ORDER TERMS

Linx RF modules make it easy and cost-effective to add wireless capabilities to any product. That’s because Linx modules containall the components necessary for the transmission of RF. Since no external components (except an antenna) are needed, the modules are easily applied, even by persons lacking previous RF design experience. This conserves valuable engineering resourcesand greatly reduces the product’s time to market. Once in production, Linx RF modules improve yields, reduce placement costs,and eliminate the need for testing or adjustment.

Prices Effective 10/9/09

www.linxtechnologies.com

The LR Series is ideal for the wireless transfer of serial data, control, or command information in the favorable 260-470MHz band.The receiver’s advanced synthesized superhet architecture achieves an outstanding typical sensitivity of -112dBm, which providesa 5-10 times improvement in range over previous solutions. The transmitter’s synthesized architecture minimizes the effects of antennaloading, providing a more stable, consistent performance. When paired, a reliable wireless link is formed, capable of transferringdata at rates of up to 10,000bps over distances of up to 3,000 feet. Applications operating at short distances or lower data rateswill also benefit from increased link reliability and superior noise immunity. Housed in tiny reflow-compatible SMD packages, theLR Series modules are footprint compatible with the popular LC Series (the transmitter pin-out is slightly different), allowing existingusers an instant path to improved range and lower cost. No external components are required (except an antenna), allowing foreasy integration, even by engineers without previous RF experience.

LR Series - Long-Range, Low-Cost RF Data Module

• Long-range• Low cost • PLL synthesized architecture• Direct serial interface• Data rates to 10,000bps• No external RF components

required (except antenna)

• Low power consumption• Wide temperature range (-40 to +70°C) • Compact surface-mount package• Adjustable transmitter output power• RSSI and power-down functions• No production tuning necessary

Quantity TX RX<200 $5.95 $9.80

200-999 $5.38 $9.63

1,000-4,999 $4.80 $8.65

5,000+ Call CallPart # DescriptionTXM-***-LR LR Series Transmitter

RXM-***-LR LR Series Receiver

*** = 315, 418 (standard), 433MHz

159 ORT LANE • MERLIN, OR 97532PHONE: (800) 736-6677 • FAX: (541) 471-6251

RF MODULES

LC Series - Low-Cost Ultra-Compact RF Data Module

Quantity TX<200 $5.60

200-999 $4.90

1,000-4,999 $4.38

5,000+ CallPart # DescriptionTXM-***-LC LC Series Transmitter

*** = 315, 418 (standard), 433MHz

The LC Series is ideally suited for volume use in OEM applications such as remote control, security, identification, and periodic datatransfer. Housed in a compact surface-mount package, the LC Series modules utilize a highly-optimized SAW architecture toachieve an unmatched blend of performance, size, efficiency, and cost. When the transmitter is paired with a matching KH2 Seriesor LR Series receiver, a highly reliable wireless link is formed, capable of transferring serial data at rates of up to 5,000bps overdistances of up to 3,000 feet. As with all Linx modules, the LC Series requires no tuning or external RF components (except an antenna).

• Ultra-compact size• Low cost in volume • High-performance SAW

architecture• Direct serial interface• Low power consumption• 5kbps maximum data rate• Wide voltage range• No production tuning necessary• No external RF components

required (except antenna)• Wide temperature range



www.l inxtechnologies.com

RF MODULES

• Complete RF / control solution• On-board encoding / decoding• Transfers status of 8 data lines• 310 (59,049) selectable addresses• Compact size• Low power consumption

• Up to 3,000ft range• No production tuning necessary• Cost-effective• User-friendly SMD construction• Directly connect switches, contacts, micros, etc.• No external RF components required (except antenna)

KH2 Series - Integrated Transmitter / Encoder and Receiver / Decoder ModulesThe KH2 Series is well-suited for OEM applications, such as remote control / command, security, and automation. The KH2transmitter combines a highly optimized SAW-based RF transmitter with an on-board encoder. The KH2 receiver combines asensitive superhet receiver with an on-board decoder. The transmitter module accepts up to eight parallel inputs, allowing directconnection of switches, contacts, or microprocessor control lines. The receiver module provides eight logic-level outputs forconnection of devices under control, such as relays, motors, indicators, or microprocessor lines. Ten tri-state address lines are alsoprovided to allow for security and the creation of 310 (59,049) unique transmitter / receiver relationships. Together, the modulesform a reliable wireless connection capable of operation over distances of up to 3,000 feet. The modules are also individuallycompatible with a complete family of FCC pre-certified OEM products, which include keyfob and handheld transmitters, relay andAC control modules. Housed in compact reflow-compatible SMD packages, the modules require no tuning or external RF components(except an antenna).

Quantity TX / ENC RX / DEC<200 $7.80 $11.95

200-999 $6.70 $10.80

1,000-4,999 $6.30 $9.75

5,000+ Call CallPart # DescriptionTXE-***-KH2 KH2 Series Transmitter

RXD-***-KH2 KH2 Series Receiver

*** = 315, 418 (standard), 433MHz

The LT Series transceiver is ideal for the wireless bi-directional transfer of serial data, control, and command information in the favorable260 to 470MHz band. The low-cost modules allow for the transparent transfer of serial data at rates of up to 10kbps over distancesof up to 3,000 feet. Data can originate from virtually any serial data source, including microcontrollers, RS-232, or a Linx transcoderIC. Applications operating over shorter distances or at lower data rates will also benefit from increased link reliability and superiornoise immunity. The modules operate over a 2.1 to 3.6VDC range and feature very low power consumption (7.6mA TX, 6.1mA RX,11.5µA sleep), a wide operational temperature range (-40° to +85°C), adjustable transmitter power with up to +10dBm output, anda typical receiver sensitivity in excess of -112dBm. These RoHS-compliant modules are housed in a tiny SMD package that iswell-suited to both prototyping and high-volume production. As with all Linx RF modules, no external RF components are required(except an antenna), which allows for rapid integration, even by engineers without previous RF design experience.

LT Series - Long-Range, Low-Cost RF Transceiver Module

• Long-range• Low cost • PLL synthesized architecture• Direct serial interface• Data rates to 10,000bps• No external RF components

required (except antenna)

• Low power consumption• Wide temperature range (-40 to +85°C) • Compact surface-mount package• Adjustable transmitter output power• RSSI and power-down functions• No production tuning necessary

Quantity Price<200 $12.89

200-999 $11.75

1,000-4,999 $10.90

5,000+ CallPart # DescriptionTRM-***-LT LT Series Transceiver

*** = 315, 418 (standard), 433MHz




RF MODULES

HP3 Series - High-Performance Synthesized Multi-Channel Analog / Digital RF Module

• Complete 900MHz RF TX / RX solution• Wide-range analog interface (50Hz - 28kHz)• Direct serial data interface• Very high data rate (up to 56kbps)• Wide supply voltage range (2.8 - 13VDC)• No external components required (except antenna)

• Microprocessor-based synthesized architecture• Qualified data output, true RSSI, CTS functions• Up to 1,000ft range• Up to 100 RF channels • No production tuning required• Horizontal or vertical mount

Part # <200 200-999 1,000-4,999 5,000+

TXM-900-HP3-PPO $23.60 $21.30 $18.90 Call

TXM-900-HP3-PPS $24.10 $21.80 $19.40 Call

TXM-900-HP3-SPO $23.60 $21.30 $18.90 Call

TXM-900-HP3-SPS $23.75 $21.46 $19.06 Call

RXM-900-HP3-PPO $28.95 $27.60 $26.70 Call

RXM-900-HP3-PPS $29.95 $28.55 $27.65 Call

RXM-900-HP3-SPO $26.16 $24.94 $24.13 Call

RXM-900-HP3-SPS $26.95 $25.75 $24.90 Call

The HP3 Series is designed for the cost-effective, high-performance wireless transfer of analog or digital data in the popular 902-928MHz band. All HP3 Series parts feature eight parallel selectable channels, and models are available which add serial selectionof 100 channels. To ensure robust performance, HP3 Series modules employ FM / FSK modulation and an advanced microprocessor-controlled synthesized architecture. The receiver uses a highly sensitive dual conversion superhet architecture and, when pairedwith an HP3 Series transmitter, forms a reliable link for transferring analog and digital information over distances of up to 1,000 feet.Transmitter and receiver modules are available in reduced-size SIP or compact SMD packages. The SIP pin arrangement isidentical to previous HP versions, eliminating the need for existing users to make PCB changes. Like all Linx modules, the HP3Series requires no tuning or external RF components (except an antenna), making integration straightforward.

Quantity TX RX<200 $11.95 $13.95

200-999 $10.30 $12.80

1,000-4,999 $9.57 $11.30

5,000+ Call CallPart # DescriptionTXM-***-ES ES Series Transmitter

RXM-***-ES ES Series Receiver

*** = 869, 916MHz

Housed in a tiny SMD package, the ES Series utilizes an advanced FM / FSK-based synthesized architecture to provide superiorperformance and noise immunity when compared to AM / OOK solutions. An outstanding 56kbps maximum data rate and wide-range analog capability make the ES Series equally at home with digital data or analog sources such as audio. A host of usefulfeatures including RSSI, PDN, audio reference, LVL ADJ, low-voltage detect, and a microprocessor clock source are provided. Likeall Linx modules, the ES Series requires no tuning or external RF components (except an antenna).

• Ultra-compact SMD package• FM / FSK modulation for performance / noise immunity• Precision-frequency synthesized architecture • Excellent sensitivity for outstanding range performance• Direct interface to analog and digital sources• High data rate - 56,000bps max.• Wide-range analog capability including audio 20Hz-28kHz

• Very low current for long life in battery-powered applications• No production tuning necessary• No external RF components required (except antenna)• User powerdown input• RSSI signal strength output• Low-voltage detect and microprocessor clock output on TX• Cost-effective

ES Series - High-Performance Single-Channel FSK RF Module




RF MODULES

The SG Series GPS receiver module is a self-contained high-performance GPS receiver with an on-board LNA and SAW filter. Basedon the SiRFstar III chipset, it provides exceptional sensitivity, even in dense foliage and urban canyons. The module’s very low powerconsumption helps maximize runtimes in battery powered applications. With over 200,000 effective correlators, the SG Seriesreceiver can acquire and track up to 20 satellites simultaneously in just seconds, even at the lowest signal levels. Housed in a compactreflow-compatible SMD package, the receiver requires no programming or additional RF components (except an antenna) to forma complete GPS solution. These features, along with the module’s standard NMEA data output, make the SG Series easy tointegrate, even by engineers without previous RF or GPS experience.

• Low-Cost• Ultra-Compact• Low power consumption (46mW)• High sensitivity (-159dBm)

• Easy serial interface• Reflow compatible SMD package• On-board LNA & SAW Filter• RoHS compliant

SG Series - High-Performance, cost-effective GPS Receiver Module

The SR Series GPS receiver module is a self-contained high-performance GPS receiver with an on-board antenna, LNA and SAWfilter. Based on the SiRFstar III chipset, it provides exceptional sensitivity, even in dense foliage and urban canyons. The module’svery low power consumption helps maximize runtimes in battery powered applications. With over 200,000 effective correlators, theSR Series receiver can acquire and track up to 20 satellites simultaneously in just seconds, even at the lowest signal levels. Housedin a compact reflow-compatible SMD package, the receiver requires no programming or additional RF components to form acomplete GPS solution. These features, along with the module’s standard NMEA data output, make the SR Series easy to integrate,even by engineers without previous RF or GPS experience.

• Low-Cost• Ultra-Compact• Low power consumption (46mW)• Integral ceramic patch antenna• On-board LNA & SAW Filter

• High sensitivity (-159dBm)• Easy serial interface• Reflow compatible SMD package• RoHS compliant

SR Series - High-Performance, cost-effective GPS Receiver Module

Quantity B T<200 $24.95 N/A

200-999 $23.20 N/A

1,000-4,999 $21.74 $21.74

5,000+ Call CallPart # DescriptionRXM-GPS-SG-x SG Series Receiver

x = T (Tape / Reel, 1,000pcs./reel), B (Bulk)

Quantity B T<200 $34.95 N/A

200-999 $32.49 $32.49

1,000-4,999 $30.46 $30.46

5,000+ Call CallPart # DescriptionRXM-GPS-SR-x SR Series Receiver

x = T (Tape / Reel, 250pcs./reel), B (Bulk)




BROADBAND AMPLIFIERS

Applications:• TX / RX range enhancement*• IF or RF buffering• Driver or final stage for PA• General-purpose gain blocks

Features:• High-output model• 10MHz-4GHz broadband operation• +18dB small signal gain at 900MHz• Up to +17dBm (50mW) linear output power• 4.8dB noise figure• Operates from a single supply• Prematched for 50Ω impedance I/O• No external RF components required• Exceptional gain flatness• Compact surface-mount package

The BBA Series is a family of low-cost, high-performance broadband RF amplifiers. The modules are ideally suited to a widerange of amplification and buffering applications, including extending the range of Linx’s own RF modules (where legally appropriate).Housed in a compact SMD package, the hybrid amps are matched to 50-ohm source and load impedances. The modules utilizea GaHBT gain stage, which yields high gain and IP3, excellent flatness, and low noise.

The BBA-519-A is the high-power model and is suitable for the final gain stage in a transmitter. This amplifier can boost the outputpower of a transmitter to much higher levels and provides a significant increase in range (where legally appropriate). While itssmall signal gain is less than the BBA-322-A, its compression point is in excess of +18dBm, allowing amplification in excess of 50mW.This makes the BBA-519-A well suited to transmitter output amplification, driver and final PA stages, and general purpose amplificationat higher power levels than the BBA- 322-A.

BBA-519-A - High-Power RF Amplifier

*IMPORTANT NOTEThe purchaser of this device should be aware that approvals may be required by applicable governing bodies for systems producing RF energy. It is theresponsibility of the user to determine and adhere to the appropriate regulations for the region in which operation is intended.


200-999 $11.25

1,000-4,999 $10.13

5,000+ CallPart # DescriptionBBA-519-A High Power Amplifier




INTERFACE MODULESThe Linx interface modules are designed to reliably convert data from one form to another while quickly and easily integrating intoour customer’s designs. The first member of the interface family is the QS Series USB module. The QS module makes adding aUSB interface exceptionally easy by making the USB operations invisible to the user. This saves development time and costs, allowingour customers to bring their products to market quickly and efficiently.

The Linx QS Series USB module allows the rapid and cost-effective addition of USB to virtually any device. Housed in a compactSMD package, the QS module provides a complete solution for bi-directional data transfer between USB and serial CMOS / TTLlogic-level sources. The module can be directly connected to virtually any serial device, including microprocessors, RS-232 / RS-485 level converters, or Linx RF modules. The QS Series USB module requires no external components (except a USB jack) andincludes all necessary firmware and drivers, freeing the designer from complicated programming. Power can be supplied externallyor from the USB bus. Both USB 1.1 and USB 2.0 are supported at data rates to 3Mbps.

QS Series - Low Cost, Compact USB Interface Module

QS Series Master Development System

This development system is designed to assist in the rapid evaluation and integration of the QS Series USB module. It contains afully assembled board and comprehensive software that demonstrates the interface of a microcontroller or RS-232 device with aPC via the module. Much of the source code is included to help speed development of custom software. A prototyping area witha signal breakout header and complete documentation speeds the addition of USB to virtually any device.

Part # Description PriceMDEV-USB-QS QS Master Development Kit $129

• USB <---> microcontroller interface• USB <---> RS-232 interface• USB <---> serial data interface• Integrated RS-232 level converter• On-board demo microcontroller• User prototyping area• Pre-assembled for immediate use• Demonstration software included

Master Kit Contains:2 USB modules*1 Fully assembled evaluation board• Full documentation• Free technical support• Support software CD• Sample source code* Listed quantity includes module mounted on development board.

INSTANT

UNIVERSAL SERIAL BUSUSB


200-999 $9.10

1,000-4,999 $8.90

5,000+ CallPart # DescriptionSDM-USB-QS-S QS Series USB Module

INSTANT

UNIVERSAL SERIAL BUSUSB




EVALUATION KITS

LC Series Basic Evaluation Kit

Part # Description PriceEVAL-***-LC LC Series Basic Evaluation Kit $139*** = 315, 418 (standard), 433MHz

This kit is a quick way to evaluate the field performance of the popular LC Series.This kit is a cost-effective starting point and a valuable benchmark to compare theperformance of your own design. The kit features pre-built evaluation boards withaudible and visual indication for range and interference testing in anticipated useenvironments.

Basic Kit Contains:• 2 LC Series transmitter modules*• 2 LR Series receiver modules*• 2 CW Series antennas (HD Series with 315MHz kits)• 2 Fully assembled evaluation boards • 1 CR2032 lithium battery• 2 AAA batteries• 4 CONREVSMA001 RP-SMA connectors*• 1 Ea. transmitter and receiver manuals • FCC Part 2 and Part 15 guidelines • Free technical support

Evaluation / development kits put you on the fast track to wireless success. Each kit contains everything necessary to evaluate theLinx module family of your choice and then integrate it into your product in record time. Clear documentation will guide you throughthe legal and technical issues of application while fully assembled evaluation boards allow immediate module evaluation under actualfield conditions. In addition, you’ll receive unlimited no-charge support from Linx’s knowledgeable application engineers.

Linx requires the purchase of an evaluation kit prior to selling individual modules to a user. This is to ensure that every customerhas all the tools necessary to correctly and legally bring wireless function to their product. Evaluation kits serve as a common pointof reference among all of our customers and allow us to assist more effectively in explaining layout concepts or troubleshootingapplication difficulties.

LR Series Basic Evaluation KitThe LR Series Basic Evaluation Kit allows the field performance of the LR Seriesmodules to be evaluated. This kit is a cost-effective starting point and a valuablebenchmark to compare the performance of your own design. The kit features pre-built evaluation boards with audible and visual indication for range and interferencetesting in anticipated use environments.

* Listed quantity includes those populated on evaluation boards


Basic Kit Contains:• 2 LR Series transmitter modules*• 2 LR Series receiver modules*• 2 CW Series antennas (HD Series with 315MHz kits)• 2 Fully assembled evaluation boards • 1 CR2032 lithium battery• 2 AAA batteries• 4 CONREVSMA001 RP-SMA connectors*• 1 Ea. transmitter and receiver manuals • FCC Part 2 and Part 15 guidelines • Free technical support

Part # Description PriceEVAL-***-LR LR Series Basic Evaluation Kit $139*** = 315, 418 (standard), 433MHz

WIRELESS MADE SIMPLE ® www.l inxtechnologies.com


EVALUATION KITS

This kit allows rapid evaluation of the KH2 Series and serves as a valuable reference during the design process. The kit featurespre-built evaluation boards for range testing and benchmarking. Additional modules and guidelines for integrating KH2 Seriesmodules into your own design are also included.

Basic Kit Contains:• 2 KH Series transmitter / encoder modules*• 2 KH Series receiver / decoder modules*• 2 CW Series antennas (HD Series with 315MHz kits)• 2 Fully assembled evaluation boards• 1 CR2032 lithium battery• 2 AAA batteries • 4 CONREVSMA001 RP-SMA connectors*• 1 Ea. transmitter and receiver manuals• FCC Part 2 and Part 15 guidelines• Free technical support

KH2 Series Basic Evaluation Kit

Part # Description PriceEVAL-***-KH2 KH2 Series Basic Evaluation Kit $149*** = 315, 418 (standard), 433MHz

LT Series Basic Evaluation KitThe LT Series Basic Evaluation Kit allows the field performance of the LT Series modules to be evaluated. This kit is a cost-effective starting point and a valuable benchmark to compare the performance of your own design. The kit features pre-builtevaluation boards with audible and visual indication for range and interference testing in anticipated use environments. The on-board transcoders provide bi-directional remote control with confirmation, and a prototyping area allows circuitry to be developedon the board.


Basic Kit Contains:• 4 LT Series transceiver modules*• 2 CW Series antennas (HD Series with 315MHz kits)• 2 Fully assembled evaluation boards • 4 AAA batteries• 4 CONREVSMA001 RP-SMA connectors*• 1 Transceiver manual• FCC Part 2 and Part 15 guidelines • Free technical support

Part # Description PriceEVAL-***-LT LT Series Basic Evaluation Kit $149*** = 315, 418 (standard), 433MHz

NEW





EVALUATION KITS

This kit is a quick way to evaluate the field performance of the popular ES Series modules. The kit does not allow for the level ofdevelopment that our Master Development System does, but it is a cost-effective starting point for many basic applications. Thedevelopment boards feature audible and visual indication for range testing and a small prototyping area with signal breakout headerfor the user’s circuit.

Basic Kit Contains:• 2 ES Series transmitter modules*• 2 ES Series receiver modules*• 2 CW Series antennas• 2 Fully assembled evaluation boards• 1 9V battery• 2 AAA batteries• 4 CONREVSMA001 RP-SMA connectors*• 1 Ea. transmitter and receiver manuals• FCC Part 2 and Part 15 guidelines• Free technical support

ES Series Basic Evaluation Kit

Part # Description PriceEVAL-***-ES ES Series Basic Evaluation Kit $179*** = 869, 916MHz



DEVELOPMENT SYSTEMS “YOUR FAST TRACK TO WIRELESS SUCCESS”


Part # Description PriceMDEV-900-HP3-PPS-RS232 Master System for HP3 Pinned RS232 $299MDEV-900-HP3-SPS-RS232 Master System for HP3 SMD RS232 $299MDEV-900-HP3-PPS-USB Master System for HP3 Pinned USB $324MDEV-900-HP3-SPS-USB Master System for HP3 SMD USB $324

HP3 Master Development System

Master System Features:• On-board encoder / decoder ICs• Integrated RS-232 or USB• Relay output for external loads • 85dB buzzer for range testing• Efficient 1/4-wave antennas• User prototyping area• 5V on-board regulator• Pre-assembled for immediate use

Master System Contains:• 2 Transmitter modules*• 2 Receiver modules*• 2 CW Series antennas• 2 9V batteries• 2 Fully assembled development boards• 4 CONREVSMA001 RP-SMA connectors*• 1 Ea. transmitter and receiver manuals• FCC Part 2 and Part 15 guidelines• Free technical support• Support software CD

This Master Development System provides a versatile platform to evaluate the Linx HP3 module family and then begin integrationof it into your own design. The system includes a pair of populated development boards which feature on-board encoder / decoderICs with buzzer and relay outputs to allow range and interference testing in anticipated use environments. For applications requiringsoftware development, the system also includes two (2) of either an RS-232 or USB interface module and demonstration software.When you are ready to begin development, a convenient prototyping area with breakout headers and regulated power supplyallows for rapid testing and interface. Finally, when you have integrated the modules into your product, the system will continue toserve as a valuable benchmark to compare the performance of your own layout and design.

* Listed quantity includes those populated on development boards

ES Series Master Development SystemThis Master Development System provides the most complete opportunity to evaluate the Linx ES Series modules and then beginthe integration of them into your own design. It features an on-board encoder / decoder with buzzer and relay outputs, which allowrange and interference testing in anticipated use environments. When you are ready to begin development, a convenient prototypingarea with breakout headers and regulated power supply allows for rapid testing and interface. For applications requiring softwaredevelopment, an on-board RS-232 serial interface and demonstration software are provided. Finally, when you have integrated themodules into your own product, the system will continue to serve as a valuable benchmark to compare the performance of yourown layout and design.

Part # Description PriceMDEV-***-ES-USB Master System for ES USB Interface $324MDEV-***-ES-RS232 Master System for ES RS232 Interface $299

*** = 869, 916MHz

Master System Features:• On-board encoder / decoder ICs• Integrated RS-232 or USB interface• Relay output for external loads • 85dB buzzer for range testing• Efficient 1/4-wave antennas• User prototyping area• 5V on-board regulator• Pre-assembled for immediate use


Master System Contains:• 2 Transmitter modules*• 2 Receiver modules*• 2 CW Series antennas• 2 9V batteries• 2 Fully assembled development boards• 4 CONREVSMA001 RP-SMA connectors*• 1 Ea. transmitter and receiver manuals• FCC Part 2 and Part 15 guidelines• Free technical support• Support software CD




DEVELOPMENT SYSTEMS

SG Series Master Development SystemThe fast track to GPS success. The Linx MDEV-GPS-SG contains everything needed to rapidly evaluate the SG Series GPSmodules and implement them in record time. This all-inclusive Master Development System features a pre-assembled developmentboard with an on-board OLED display for standalone testing. The system can also be attached to a PC via USB and operated usingthe supplied software. The software shows satellite positions, SNR, satellites in use, NMEA data, coordinates, and even themodule’s position on GoogleTM Maps! For development, a convenient prototyping area with breakout headers and regulated powersupply allows for rapid testing and interface. Direct technical support for the system and all on-board Linx products is also included.

Part # Description PriceMDEV-GPS-SG Master System for SG Series $249

Master System Features:• Integrated USB interface• OLED Display• User prototyping area• 5V on-board regulator• Pre-assembled for immediate use


Master System Contains:• 2 Receiver modules*• 1 SH Series antenna• 4 AAA batteries• 1 Fully assembled development board• 1 CONREVSMA001 RP-SMA connector*• 1 receiver manual• Free technical support• Support software CD

SR Series Master Development SystemThe fast track to GPS success. The Linx MDEV-GPS-SR contains everything needed to rapidly evaluate the SR Series GPSmodules and implement them in record time. This all-inclusive Master Development System features a pre-assembled developmentboard with an on-board OLED display for standalone testing. The system can also be attached to a PC via USB and operated usingthe supplied software. The software shows satellite positions, SNR, satellites in use, NMEA data, coordinates, and even themodule’s position on GoogleTM Maps! For development, a convenient prototyping area with breakout headers and regulated powersupply allows for rapid testing and interface. Direct technical support for the system and all on-board Linx products is also included.

Part # Description PriceMDEV-GPS-SR Master System for SR Series $289

Master System Features:• Integrated USB interface• OLED Display• User prototyping area• 5V on-board regulator• Pre-assembled for immediate use


Master System Contains:• 2 Receiver modules*• 1 SH Series antenna• 4 AAA batteries• 1 Fully assembled development board• 1 CONREVSMA001 RP-SMA connector*• 1 receiver manual• Free technical support• Support software CD




DEVELOPMENT SYSTEMS

MS Series Master Development SystemThis comprehensive development system is designed to assist in the rapid evaluation and integration of the MS Series encodersand decoders. The all-inclusive development system contains all of the tools necessary to fully explore the capabilities of the MSSeries encoders and decoders. It features pre-assembled evaluation boards, which include everything needed to quickly test theoperation of the encoder and decoder. On-board Linx RF modules provide a wireless link for basic remote control operation, whichallows the encoder and decoder to be quickly tested in a wireless environment. When you are ready to begin development, a largeprototyping area with breakout headers and regulated power supply allows for rapid testing and integration of your own design. Inaddition to its stand-alone functions, the board can also be connected to a PC via USB. Included software audibly and visuallydemonstrates the powerful capabilities of the MS Series.

Part # Description PriceMDEV-LICAL-MS MS Master Development Kit w/ LR Modules $249MDEV-LICAL-MS-ES MS Master Development Kit w/ ES Modules $249

Master System Features:• User prototyping area• Breakout header• On-board 3V regulator (5V for ES

Series receiver)• USB interface• Pre-assembled for immediate use• Demonstration software included• Satifies the kit requirements for

the MS, LR, or ES Series

Master System Contains:• 2 MS Series encoders*• 2 MS Series decoders*• 1 418MHz LR or 916MHz ES Series transmitter*• 1 418MHz LR or 916MHz ES Series receiver*• 2 CW Series antennas• 2 Fully assembled development boards• 2 9V batteries• Full documentation• Free technical support• Support software CD* Listed quantity includes those populated on development boards

HS Series Master Development System

Part # Description PriceMDEV-LICAL-HS HS Master Development Kit w/ LR Modules $299MDEV-LICAL-HS-ES HS Master Development Kit w/ ES Modules $299

Master System Features:• User prototyping area• Breakout header• On-board 3V voltage regulator (5V for

ES Series receiver)• USB interface• Pre-assembled for immediate use• Demonstration software included• Satisfies the kit requirements for the

HS, LR, or ES Series

Master System Contains:• 2 HS Series encoders*• 2 HS Series decoders*• 1 418MHz LR or 916MHz ES Series transmitter*• 1 418MHz LR or 916MHz ES Series receiver*• 2 CW Series antennas• 2 Fully assembled evaluation boards• 2 9V batteries• Full documentation• Free technical support• Support software CD* Listed quantity includes those populated on development boards

This all-inclusive development system contains all of the tools necessary to fully explore the capabilities of the HS Series encodersand decoders, and assist in the rapid evaluation and integration of the parts into an end product. It features pre-assembled evaluationboards, which include everything needed to quickly test the operation of the encoder and decoder. On-board Linx RF modules providea wireless link for basic remote control operation, which allows the encoder and decoder to be quickly tested in a wirelessenvironment. When you are ready to begin development, a large prototyping area with breakout headers and regulated powersupply allows for rapid testing and integration of your own design. In addition to its stand-alone functions, the board can also beconnected to a PC via USB. Included software audibly and visually demonstrates the powerful capabilities of the HS Series.




DEVELOPMENT SYSTEMS

MT Series Master Development System

Master System Features:• User prototyping area• Breakout header• On-board 3V regulator• USB interface• Pre-assembled for immediate use• Demonstration software included

Master System Contains:• 4 MT Series transcoders*• 2 418MHz LT Series transceivers*• 2 CW Series antennas• 2 Fully assembled evaluation boards• 2 9V batteries• Full documentation• Free technical support• Support software CD* Listed quantity includes those populated on development boards

This all-inclusive development system contains all of the tools necessary to fully explore the capabilities of the MT Series transcoders,and assist in the rapid evaluation and integration of the parts into an end product. It features pre-assembled evaluation boards,which include everything needed to quickly test the operation of the transcoder. On-board Linx RF modules provide a wireless linkfor basic remote control operation, which allows the transcoder to be quickly tested in a wireless environment. When you are readyto begin development, a large prototyping area with breakout headers and regulated power supply allows for rapid testing and integrationof your own design. In addition to its stand-alone functions, the board can also be connected to a PC via USB. Included softwaredemonstrates the powerful capabilities of the MT Series.

Part # Description PriceMDEV-LICAL-MT MT Series Master Development Kit $299




INTEGRATED CIRCUITSLS SeriesThe Linx LS Series encoders and decoders provide an extremely simple, yet reliable, protocol for the transmission of switchclosures or button contacts. This series can find use in any basic, low-cost remote control application. Simply take a data line highon the encoder and a corresponding line will go high on the decoder. No programming or addressing is required, making integrationof the LS extremely easy while maintaining a robust link.

MS SeriesMS Series encoders and decoders are ideal for remote control and command, security, keyless entry, and a host of similarapplications. The encoder IC allows the status of up to eight buttons or contacts to be transferred with high level of uniqueness viaan RF or infrared link. The decoder then reproduces the button states on its outputs. The MS Series has several unique featuresthat make it superior to competitive solutions. These include the ability to easily define user groups and assign permissions toindividual output lines. Outputs can be latched or momentary and secure address assignments can be instantly changed withoutcumbersome DIP switches or cut traces. The large, twenty-four bit address size provides for over 16,000,000 unique addresses,making transmissions highly unique and secure, and minimizing the possibility of multiple devices having conflicting addresses.The decoder can learn up to 40 different encoders and outputs the originating encoder ID for logging or identification. Housed intiny 20-pin SSOP packages, MS Series parts feature low supply voltage and low current consumption.

Quantity ENC DEC<200 $2.89 $2.89

200-999 $2.67 $2.67

1,000-4,999 $2.42 $2.42

5,000+ Call CallPart # DescriptionLICAL-ENC-LS001 LS Series Encoder

LICAL-DEC-LS001 LS Series Decoder


200-999 $2.95 $2.95

1,000-4,999 $2.73 $2.73

5,000+ Call CallPart # DescriptionLICAL-ENC-MS001 MS Series Encoder

LICAL-DEC-MS001 MS Series Decoder

Features:• No addressing or programming • Easy to use • Very low current consumption • Four data lines

• Easy serial interface • Selectable baud rates • High noise immunity• Standard PDIP package

Applications Include:• Range Testing • Simple Remote Control • Wire Elimination • Remote Status Monitoring • Lighting Control

Features:• Secure 224 possible addresses • 8 data lines • Low 2.0-5.5V operating voltage • Low supply current (370µA @ 3V) • Ultra-low 0.1µA standby current • Definable recognition authority • True serial encoding

• Excellent noise immunity • Selectable baud rates • No programmer required • Direct serial interface • Small SMD package • Latched or momentary outputs • Encoder ID output by decoder

Applications Include:• Keyless Entry • Door and Gate Openers • Security Systems • Remote Device Control • Car Alarms / Starters • Remote Status Monitoring • Call / Paging Systems

COMPLIAN

T

RoHS

COMPLIAN

T

RoHS




INTEGRATED CIRCUITSHS Series - Encoder and Decoder with CipherLinx®

Encrypted Remote Control TechnologyHS Series encoders and decoders are designed to provide maximum security for Remote Keyless Entry (RKE) and remote controlapplications. The series consists of an encoder that will encode the status of up to 8 buttons or contact closures into a highlysecure encrypted transmission, and a decoder that will decode, authenticate, and replicate the button or contact states. The seriesuses CipherLinx® encrypted remote control technology, which is based on a core algorithm developed by the United States NationalSecurity Agency (NSA), which is considered one of the most secure encryption algorithms available. One of the key features ofCipherLinx® technology is that it will never send or accept the same packet twice. This alone makes it more secure than the popular“rolling code” type devices, which could repeat packets multiple times. Furthermore, CipherLinx® changes codes on every packet,not just every button press. In addition to offering state-of-the-art security, the parts also offer innovative features, including up to8 data lines, multiple baud rates, individual “button level” user permissions, an optional keypad PIN, encoder identity output, lowpower consumption and easy “programming free” setup. The compelling combination of security, features, and ease of use makethe HS Series the logical choice for all high-security RKE applications.

Applications Include:• Keyless Entry / Access Control• Door and Gate Openers • Security Systems • Remote Device Control • Car Alarms / Starters • Remote Status Monitoring • Home / Industrial Automation


200-999 $3.22 $3.22

1,000-4,999 $2.99 $2.99

5,000+ Call CallPart # DescriptionLICAL-ENC-HS001 HS Series Encoder

LICAL-DEC-HS001 HS Series Decoder

Features:• CipherLinx® security technology • Secure data authentication• ISE evaluated• Never loses sync• Never sends or accepts the same packet twice• Optional PIN-protected encoder access• 8 selectable data lines• Wide 2.0 to 5.5V operating voltage• Low supply current (500µA @ 3V)• Ultra-low 0.2µA sleep current• Selectable baud rates• No programmer required• Encoder ID available at decoder• “Button level” permissions• True serial encoding• Excellent noise immunity

EVALUATEDCOMPLIAN

T

RoHS

MT SeriesThe MT Series transcoder IC provides unprecedented features for bi-directional remote control and command applications. Encoderand decoder ICs are commonly used to allow the status of inputs, such as switch or button closures, to be sent in one directionacross a wireless link. While the MT can perform these basic uni-directional functions with ease, it also allows the bi-directionalexchange of information and reception confirmation.

The transcoder provides eight lines which can be configured as inputs or outputs. The outputs can be individually set for latchedor momentary operation. Recognition of the individual outputs can be easily defined for each device by the manufacturer or enduser. This allows the creation of user groups, relationships, and permissions. A large twenty-four bit address size makes transmissionshighly unique, minimizing the possibility of conflict between multiple devices. An automatic confirmation indicates that the transmissionwas successfully received. The MT also outputs the ID of the originating transcoder for logging or identification.

A Serial Interface Engine (SIE) allows the transcoder to be configured and controlled from an external microcontroller or PC.Permissions and users can be configured, modes and functions set, and external data added to the transmission. A targetingfeature allows commands to be directed to specific devices. The MT is housed in a tiny 20-pin SSOP package, and features lowsupply voltage, current consumption and selectable baud rates. It is also compatible with Linx MS Series encoder and decoder ICs.

Features:• Bi-directional control• Automatic confirmation• Secure 224 possible addresses• 8 status lines• Serial Interface Engine (SIE)• Latched and/or momentary outputs• Definable recognition authority

• Transmitter ID output• Custom data transfer• Device targeting• Wide operating voltage• Low supply current (370µA @ 3V)• True serial encoding• Selectable baud rates• No programmer required

Applications Include:• Keyless Entry • Door and Gate Openers • Security Systems • Remote Device Control • Car Alarms / Starters • Remote Status Monitoring • Call / Paging Systems


200-999 $2.97

1,000-4,999 $2.89

5,000+ CallPart # DescriptionLICAL-TRC-MT MT Series Transcoder




PRE-CERTIFIED OEM RF PRODUCTS

The Keyfob transmitter is ideal for general-purpose remote control and command applications. It has been pre-certified for FCCPart 15, Industry Canada, and European CE (433.92MHz only) compliance, reducing development costs and time to market.Available in 315, 418 (standard), and 433.92MHz, this stylish and compact remote has a range of up to 750 feet when combinedwith the KH2 Series or LR Series receiver. The Keyfob can be configured with 1 to 5 buttons and the keypad and labeling can bemodified to meet specific customer requirements. Selectable addressing provides security and allows the creation of up to 1,024distinct transmitter-receiver relationships. The Keyfob is available in black, white, or translucent colors. The transmission can bedecoded using a matching Linx Function Module, KH2 Series receiver / decoder, or an LR or LT Series receiver paired with adecoder IC or microcontroller. The unit operates from a single 3V CR2032 lithium button cell.

Keyfob Transmitter


200-999 $13.78

1,000-4,999 $10.90

5,000+ Call

Part # CMD -KEY#-***-xxx# Number of buttons: 1 to 5

*** 315, 418 (standard), 433MHz

xxx Leave blank for standard Black

CGY= Gray • CBL = Blue • WHT = White

CRE = Red • CPU = Purple

The Linx MS Series Keyfob transmitter is ideal for remote control and command applications. Available in 315, 418 (standard), and433.92MHz versions, it has been pre-certified for FCC Part 15, Industry Canada, and European CE (433.92MHz only) compliance.This dramatically reduces development cost and time to market. The high-performance synthesized design provides superiorfrequency accuracy and minimizes body proximity effects. When combined with an LR or LT Series receiver, the Keyfob canoperate at distances of up to 750 feet. Ease of use and security are dramatically enhanced by the on-board MS Series encoder,which allows instant creation of up to 16,777,216 (224) unique addresses without cumbersome DIP switches or cut traces. Whenpaired with a MS Series decoder, Keyfob identity can be determined and button permissions established. The Keyfob is availablewith 1 to 5 buttons and can be custom labeled. The unit operates from a single 3V CR2032 lithium button cell.

MS Keyfob Transmitter


200-999 $14.75

1,000-4,999 $11.30

5,000+ Call

Part # OTX-***-HH-KF#-MS-xxx# Number of buttons: 1 to 5

*** 315, 418 (standard), 433MHz




Custom KeyfobsWith a one-time NRE and minimum order, Linx can configure the keypad and label areas to meet your specific requirements. Casecolor, button colors and labels, and logos can all be customized for a specific company or product, adding a great deal of uniquenessand professionalism to the product. Contact Linx for details.

INS

TANT RF

PRECERT

IFIED

* 1,000 piece minimum order for color cases



OEM PRODUCT EVALUATION KITS


Part # Description PriceEVAL-***-KEY# Keyfob Basic Evaluation Kit $119*** = 315, 418 (standard), 433MHz# = Number of buttons: 1 to 5

The Basic Evaluation Kit is an ideal starting point to evaluate the performance of Linx’s popular keyfob transmitters and beginintegration into your own product. The pre-certified keyfobs allow OEM customers to rapidly incorporate wireless functions in a widevariety of remote control and command applications. The kit contains two keyfob transmitters, along with a pre-assembleddemonstration / development board based on the KH2 Series receiver module. An antenna, battery, extra KH2 receiver, and fulldocumentation are also provided. The system may be ordered with keyfobs in 1 to 5-button configurations. (The 5-button configurationis supplied unless otherwise specified.

Basic Kit Contains:• 2 Keyfob transmitters • 2 KH2 Series receiver modules*• 1 CW Series antenna (HD Series with 315MHz kits)• 1 Fully assembled evaluation board with batteries• 2 CONREVSMA001 RP-SMA connectors*• 1 Ea. Keyfob and KH2 receiver manuals • FCC Part 2 and Part 15 guidelines• Free technical support

Keyfob Basic Evaluation Kit

MS Keyfob Master Development System

The MS Keyfob Master Development System is an ideal starting point to evaluate theperformance of Linx's popular MS Keyfob transmitters and begin integration into yourproduct. These FCC pre-certified Keyfobs allow OEMs to rapidly incorporate wirelessfunctions in a variety of remote control and command applications.

The all-inclusive development system features a pre-assembled evaluation board, whichincludes everything needed to quickly test the operation of the transmitter, receiver, anddecoder. When you are ready to begin development, a convenient prototyping area withbreakout headers and regulated power supply on the receiver / decoder board allows forrapid testing and interface. In addition to its stand-alone functions, the board can also beconnected to a PC via a USB connection. Included software audibly and visuallydemonstrates the powerful capabilities of the system.

Part # Description Price

MDEV-***-HH-KF5-MS MS Keyfob Master Development System $149.95*** = 315, 418 (standard), 433MHz

Master System Features:• User prototyping area• Breakout header• On-board 3V regulator• USB Interface• Pre-assembled boards for immediate use• Demonstration software• Satisfies the kit purchase requirement

for the MS, LR, and QS Series modules

Master System Contains:• 2 MS Keyfob transmitters• 2 MS Series decoders*• 2 LR Series receivers*• 1 CW Series antenna (HD Series with 315MHz)• 1 Fully assembled evaluation board• 1 9V battery• 2 CONREVSMA001 RP-SMA connectors*• Full documentation• Free technical support• Support software CD

* Listed quantity includes module mounted on development board

* Listed quantity includes module mounted on development board





The Long-Range Handheld transmitter is ideal for general-purpose remote control and command applications that require longertransmission distances. As a part of our Holtek encoder-based OEM family, it has been pre-certified for FCC Part 15, Industry Canada,and European CE (433.92MHz only) compliance, reducing costs and time to market. Available in 315, 418 (standard), and433.92MHz, this small remote has a transmission range of up to 1,000 feet when combined with the KH2, LR, or LT Series receiver.The transmitter unit can be configured with 1 to 8 buttons and the keypad and labeling can be modified to meet specific OEMcustomer requirements. Selectable addressing provides security and allows the creation of up to 1,024 distinct transmitter-receiverrelationships. The address can be easily changed via an externally accessible DIP switch. The transmission can be decoded usinga matching Linx Function Module, KH2 Series receiver / decoder, or a Linx LR or LT Series receiver paired with a decoder IC ormicrocontroller. The unit uses a single 3V CR2032 lithium button cell.

Long-Range Handheld Transmitter

The Compact Handheld transmitter is ideal for general remote control and command applications. As a part of our Holtek encoder-based OEM family, it has been pre-certified for FCC Part 15, Industry Canada, and European CE (433.92MHz only) compliance,reducing development costs and time to market. Available in 315, 418 (standard), and 433.92MHz, this compact remote has atransmission range of up to 750 feet when combined with the KH2, LR, or LT Series receiver. The transmitter unit can be configuredwith 1 to 8 buttons and the keypad and labeling can be modified to meet specific OEM customer requirements. Selectable addressingprovides security and allows the creation of up to 1,024 distinct transmitter-receiver relationships. The address can be easilychanged via an externally accessible DIP switch. The transmission can be decoded using a matching Linx Function Module, KH2Series receiver / decoder, or a Linx LR or LT Series receiver paired with a decoder IC or microcontroller. The unit uses a single3V CR2032 lithium button cell.

Compact Handheld Transmitter

INS

TANT RF

PRECERT

IFIED

Part # CMD-HHLR-***-xxx-xx*** 315, 418 (standard), 433MHz

xx MD - leave blank for standard buttons




Now available with metal domebuttons for a more tactile feel!

Quantity Standard Metal Dome<200 $24.95 $25.55

200-999 $22.30 $22.90

1,000-4,999 $19.70 $20.30

5,000+ Call Call

Part # CMD-HHCP-***-xxx-xx*** 315, 418 (standard), 433MHz

xx MD - leave blank for standard buttons




Quantity Standard Metal Dome<200 $21.95 $22.55

200-999 $19.75 $20.35

1,000-4,999 $18.24 $18.84

5,000+ Call Call

Now available with metal domebuttons for a more tactile feel!

This handheld remote is capable of up to 100ft. transmission ranges when combined with the KH2, LR, or LT Series receiver. Ithas 8 buttons and selectable addressing allows the creation of up to 256 distinct transmitter / receiver relationships. The transmissioncan be decoded using a matching Linx Function Module, a KH2 Series receiver / decoder, or an LR or LT Series receiver pairedwith a decoder IC or a microcontroller. The unit operates from a single 3V lithium button cell and is FCC pre-approved.

Full-Size Handheld Transmitter

Part # CMD-HHTX-****** = 315, 418 (standard), 433MHz


200-999 $22.00

1,000-4,999 $19.50

5,000+ Call

Custom Transmitter KeypadsWith a one-time NRE and minimum order, Linx can configure the keypad and labelareas to meet your specific requirements. Button placement, colors, and logos canall be customized for a specific company or product, adding a great deal ofuniqueness and professionalism to the product. Contact Linx for details.








The Linx OTX-***-HH-LR8-MS Long-Range Handheld Transmitter is ideal for general-purpose remote control and commandapplications that require longer transmission distances. This unit has been pre-certified for FCC Part 15, Industry Canada, and EuropeanCE (433.92MHz only) compliance, reducing costs and time to market. Available in 315, 418 (standard), or 433.92MHz, this smallremote has a transmission range of up to 1,000 feet when combined with the LR or LT Series receiver. The transmitter unit canbe configured with 1 to 8 buttons and the keypad and labeling can be modified to meet specific OEM customer requirements. Easeof use and security are dramatically enhanced by the on-board MS Series encoder, which allows instant creation of up to 16,777,216(224) unique addresses without cumbersome DIP switches or cut traces. When paired with a MS Series decoder, transmitter identitycan be determined and button permissions established. The unit uses a single 3V CR2032 lithium button cell.

MS Long-Range Handheld Transmitter

The Linx OTX-***-HH-CP8-MS Compact Handheld Transmitter is ideal for general-purpose remote control and command applications.This unit has been pre-certified for FCC Part 15, Industry Canada, and European CE (433.92MHz only) compliance, reducingcosts and time to market. Available in 315, 418 (standard), or 433.92MHz, this compact remote has a transmission range of up to750 feet when combined with the LR or LT Series receiver. The transmitter unit can be configured with 1 to 8 buttons and the keypadand labeling can be modified to meet specific OEM customer requirements. Ease of use and security are dramatically enhancedby the on-board MS Series encoder, which allows instant creation of up to 16,777,216 (224) unique addresses without cumbersomeDIP switches or cut traces. When paired with a MS Series decoder, transmitter identity can be determined and button permissionsestablished. The unit uses a single 3V CR2032 lithium button cell.

MS Compact Handheld Transmitter

Part # OTX-***-HH-LR8-MS*** = 315, 418 (standard), 433MHz

Quantity Standard<200 $32.80

200-999 $29.50

1,000-4,999 $28.75

5,000+ Call

Part # OTX-***-HH-CP8-MS*** = 315, 418 (standard), 433MHz


200-999 $28.09

1,000-4,999 $27.37

5,000+ Call

INS

TANT RF

PRECERT

IFIED






The HS Long-Range Handheld RF transmitter is ideal for remote control and command applications that require the highest levelof security. As a part of our HS encoder-based OEM family, it has been pre-certified for FCC Part 15, Industry Canada, andEuropean CE (433.92MHz only) compliance, reducing costs and time to market. Available in 315, 418 (standard), or 433.92MHz,this small remote has a compact external antenna and is capable of transmitting over distances of up to 1,000 feet when combinedwith the LR or LT Series receiver. The transmitter unit can be configured with 1 to 8 buttons and the keypad and labeling can bemodified to meet specific OEM customer requirements. Security is dramatically enhanced by the on-board HS Series encoder, whichuses CipherLinx® technology, a high-security encryption algorithm and wireless protocol. When paired with an HS Series decoder,transmitter identity can be determined and button permissions established. The unit uses a single 3V CR2032 lithium button cell.

HS Long-Range Handheld Transmitter

The HS Compact Handheld RF transmitter is ideal for remote control and command applications that require the highest level ofsecurity. As a part of our HS encoder-based OEM family, it has been pre-certified for FCC Part 15, Industry Canada, and EuropeanCE (433.92MHz only) compliance, reducing costs and time to market. Available in 315, 418 (standard), or 433.92MHz, this compactremote uses an internal antenna element and is capable of transmitting over distances of up to 750 feet when combined with theLR or LT Series RF receiver. The transmitter unit can be configured with 1 to 8 buttons and the keypad and labeling can be modifiedto meet specific OEM customer requirements. Security is dramatically enhanced by the on-board HS Series encoder, which usesCipherLinx® technology, a high-security encryption algorithm and wireless protocol. When paired with an HS Series decoder,transmitter identity can be determined and button permissions established. The unit uses a single 3V CR2032 lithium button cell.

HS Compact Handheld Transmitter

Part # OTX-***-HH-LR8-HS*** = 315, 418 (standard), 433MHz


200-999 $29.75

1,000-4,999 $28.90

5,000+ Call

Part # OTX-***-HH-CP8-HS*** = 315, 418 (standard), 433MHz


200-999 $28.30

1,000-4,999 $27.50

5,000+ Call

INS

TANT RF

PRECERT

IFIED





This Basic Evaluation Kit allows for rapid testing of Linx’s popular handheld transmitters and speeds integration into your ownproduct. The pre-certified HHLR, HHCP, and HHTX transmitters allow OEM customers to rapidly incorporate wireless functions ina wide variety of wireless products. The kit contains two handheld transmitters, along with a pre-assembled demonstration /development board based on the KH2 Series receiver module. An antenna, battery, extra KH2 receiver, and full documentationare also provided. Customization of the handheld transmitter’s button area is available on OEM orders.

Basic Kit Contains:• 2 HH Series transmitters • 2 KH2 Series receiver modules*• 1 CW Series antenna (HD Series with 315MHz kits)• 1 Fully assembled evaluation board with batteries• 2 CONREVSMA001 RP-SMA connectors*• 1 Ea. keyfob and KH2 receiver manuals• FCC Part 2 and Part 15 guidelines• Free technical support

Part # Description PriceEVAL-***-HHTX Handheld Evaluation Kit - Full-Size Handheld Transmitter $129EVAL-***-HHCP Handheld Evaluation Kit - Compact Handheld Transmitter $129EVAL-***-HHLR Handheld Evaluation Kit - Long-Range Handheld Transmitter $129*** = 315, 418 (standard), 433MHz

TX (Full-Size)CP (Compact) LR (Long-Range)

Holtek-Based Handheld Basic Evaluation Kits

MS Handheld Transmitter Master Development SystemThe Linx MS Handheld transmitters are ideal for remote control and command applications.Available in 315, 418 (standard), or 433.92MHz versions, they have been pre-certified for FCCPart 15, Industry Canada, and European CE (433.92MHz) compliance. This dramatically reducesdevelopment cost and time to market. When combined with an LR Series receiver, the transmitterscan operate at distances of up to 1,000 feet (LR) or 750 feet (CP).

This comprehensive development system is designed to assist in the rapid evaluation andintegration of the Handheld transmitters. The all-inclusive kit features a pre-assembled evaluationboard, which includes everything needed to quickly test the operation of the transmitter, receiver,and decoder. When you are ready to begin development, a convenient prototyping area withbreakout headers and regulated power supply on the receiver / decoder board allows for rapidtesting and interface. In addition to its stand-alone functions, the board can also be connectedto a PC via a USB connection. Included software audibly and visually demonstrates the powerfulcapabilities of the system. Technical support for the kit and all on-board Linx products is included.


MDEV-***-HH-CP8-MS MS Compact Handheld Transmitter Master Development System $149.95MDEV-***-HH-LR8-MS MS Long-Range Handheld Transmitter Master Development System $149.95*** = 315, 418 (standard), 433MHz

Master System Features:• User prototyping area• Breakout header• On-board 3V regulator• USB Interface• Pre-assembled boards for immediate use• Demonstration software• Satisfies the kit purchase requirement for

the MS, LR, and QS Series modules

Master System Contains:• 2 MS Handheld transmitters • 2 MS Series decoders*• 2 LR Series receivers*• 1 CW Series antenna (HD Series with 315MHz)• 1 Fully assembled evaluation board• 1 9V battery• 2 CONREVSMA001 RP-SMA connectors*• Full documentation • Free technical support • Demonstration software CD* Listed quantity includes those populated on evaluation boards CP (Compact)

LR (Long-Range)





PRE-CERTIFIED OEM RF PRODUCTSHS Handheld Transmitter Master Development SystemThe HS Handheld RF transmitter is ideal for remote control and command applications thatrequire the highest level of security. This RF transmitter is based upon the HS Series encoder,which uses CipherLinx® encrypted remote control technology that provides ultimate RF securityand unprecedented features. As a part of our HS encoder-based OEM family, it has been pre-certified for FCC Part 15, Industry Canada, and European CE (433MHz only) compliance, reducingcosts and time to market. Available in 315, 418 (standard), or 433.92MHz, this small remote hasa compact external antenna (LR8) or internal antenna (CP8) and is capable of transmitting overdistances of up to 1,000 feet (LR) or 750 feet (CP) when combined with the LR Series RF receiver.

This comprehensive Master Development System is designed to assist in the rapid evaluationand integration of the HS Long-Range Handheld transmitters. The all-inclusive system featuresa pre-assembled evaluation board, which includes everything needed to quickly test the operationof the transmitter, receiver, and decoder. When you are ready to begin development, a convenientprototyping area with breakout headers and regulated power supply on the receiver / decoderboard allows for rapid testing and interface. In addition to its stand-alone functions, the board canalso be connected to a PC via a USB connection. Powerful demonstration software is includedwhich audibly and visually demonstrates the capabilities of the system. Technical support forthe system and all on-board Linx products is included.


MDEV-***-HH-CP8-HS HS Compact Handheld Transmitter Master Development System $149.95MDEV-***-HH-LR8-HS HS Long-Range Handheld Transmitter Master Development System $149.95*** = 315, 418 (standard), 433MHz

Master System Features:• User prototyping area• Breakout header• On-board 3V regulator• USB Interface• Pre-assembled boards for immediate use• Demonstration software• Satifies the kit purchase requirement for

the HS, LR, and QS Series modules

Master System Contains:• 2 HS Handheld transmitters • 2 HS Series decoders*• 2 LR Series receivers*• 1 CW Series antenna (HD Series with 315MHz)• 1 Fully assembled evaluation board• 1 9V battery• 2 CONREVSMA001 RP-SMA connectors*• Full documentation • Free technical support • Demonstration software CD* Listed quantity includes module mounted on development board

CP (Compact)LR (Long-Range)

NEW





The Relay Function Module is a member of the Linx Holtek-based pre-certified OEM product line. The modules have been testedfor FCC and Industry Canada compliance and can be quickly customized to meet a specific OEM’s labeling requirements. This greatlyreduces the time and expense of bringing an RF-based product to market. The Relay Function Modules provide four latched ormomentary relay outputs that are capable of switching external AC- or DC-powered loads of up to 5 amps. They incorporate a LinxLR Series receiver and an on-board Holtek decoder IC. Selectable addressing provides security and allows the creation of 256 distincttransmitter / receiver relationships to avoid unwanted interaction when multiple systems are in use. The antenna rotates and swivelsto a variety of positions to allow for maximum range. When paired with a compatible Linx OEM Handheld transmitter or transmittermodule, the Relay Function Module serves as a reliable wireless switching device at distances of up to 1,000 feet.

The AC Function Module plugs directly into a 110VAC wall receptacle and is capable of switching devices at loads up to 1,800 watts(15 amps) or 1HP at 120VAC. Devices connect via a standard NEMA 5-15 North American power plug. The antenna rotates andswivels to a variety of positions to allow for maximum range when plugged into a power strip or floor outlet. DIP switches allow forthe selection of which transmitter buttons will activate the unit. Selectable addressing provides security and allows the creation of16 distinct transmitter / receiver relationships to avoid unwanted interaction when multiple systems are in use. When paired witha compatible Linx OEM Handheld transmitter or transmitter module, the AC Function Module serves as a reliable wireless switchingdevice at distances of up to 100 feet. Labeling can be modified to meet specific customer requirements. The unit is pre-approvedas a Class B device to allow immediate integration and sale in most OEM products.


200-999 $34.80

1,000-4,999 $32.60

5,000+ CallPart # FCTN-WALL-****** = 315, 418 (standard), 433MHz


200-999 $38.30

1,000-4,999 $36.80

5,000+ CallPart # FCTN-RLY4-****** = 315, 418 (standard), 433MHz

Front Back

OEM Relay Function Module

OEM AC Function Module

INS

TANT RF

PRECERT

IFIED

The AC wall adaptor can power the OEM Relay Function Module from an AC wall socket.AC Wall Adaptor


PWRACAWALL16V1A AC Wall Adaptor $12.95

159 ORT LANE • MERLIN, OR 97532PHONE: (800) 489-1634 • FAX: (541) 471-6251www.antennafactor .com

PERMANENT-MOUNT ANTENNAS

RA Version(Actual Size)

ST Version(Actual Size)

Permanent-mount antennas are designed to mount directly to a product’s circuit board, thereby maximizing performance, eliminatingthe cost of a connector, and meeting FCC requirements for antenna attachment. These antennas are ideally suited to OEMapplications that require a compact, cosmetically attractive, low-cost antenna solution. Custom colors and logo options are alsoavailable for volume OEM customers.

JJB Series Antenna

LP Series Reduced-Height Antenna

RA Series Antenna

LP Series antennas feature an internal helix, which greatly reduces the overall height while offering near monopoleperformance in a rugged package. The LP mounts to a PCB via a single screw and meets Part 15 requirements.

The RA Series offers maximum mounting and orientation flexibility in a cost-effective, reduced-height package.The antenna’s innovative articulating base allows it to tilt 180° and rotate 360° for optimum orientation. The RA mountsto a PCB via a single screw and meets Part 15 requirements.

PW Series Whip Antenna

Quantity Price (All Frequencies)<200 $1.79

200-999 $1.47

1,000-4,999 $1.33

5,000+ CallPart # ANT-***-PW-LP*** = 315, 418, 433, 868, 916MHz, 2.4GHz Standard in black


200-999 $2.07

1,000-4,999 $1.86

5,000+ CallPart # ANT-***-PW-RA*** = 315, 418, 433, 868, 916MHz Comes standard in black


200-999 $1.41

1,000-4,999 $1.08

5,000+ CallPart # ANT-***-JJB-xx*** = 868, 916MHz, 2.45GHz Comes standard in black

xx = RA (Right Angle) or ST (Straight)

• Low cost• Outstanding performance• Omni-directional pattern• Wide bandwidth• Flexible main shaft• Rugged & weatherized• Integral 8½-inch RG-174 coax cable• Use with plastic* or metal enclosures

*Requires proximity ground plane

• Very low cost• Compact housing• Excellent performance• Omni-directional pattern• Weather resistant• Screw-mount• Use with plastic* or metal enclosures


• Low cost• Reduced-height helical whip• Tilts and rotates• Excellent performance• Omni-directional pattern• Screw-mount• Use with plastic* or metal enclosures


• Very low cost• Ultra-compact package• Easily concealed internally • Good for internal or external mounting• Excellent performance• Omni-directional pattern• Use with plastic* or metal enclosures


Designed for permanent attachment, PW Series antennas give outstanding performance in a rugged and cost-effective package. The antenna is attached by placing its base through a 1/4” hole in the product and securingit with a nut or by threading it into a PEM-style insert. This method of attachment is highly secure and saves thecost of an antenna connector. The antenna is fed through the base with RG-174 coax cable, which may besoldered directly to the board or attached using a 50-ohm connector. Standard cable length is 8.5”. Customlengths and terminations are available by special order. The 2.4GHz version is 1/2-wave, the rest are 1/4-wave.

This tiny permanent-mount antenna is ideal for applications requiring an internal or small external antennawith performance close to that of a 1/4-wave whip. Available in a right angle or straight form. The antenna attachesdirectly to a user’s PCB.

Quantity 418 433 868 916 2.4<200 $5.07 $4.97 $4.88 $4.78 $4.95

200-999 $4.81 $4.72 $4.63 $4.53 $4.57

1,000-4,999 $4.16 $4.08 $4.00 $3.92 $4.27

5,000+ Call Call Call Call CallPart # ANT-***-PW-QW*** = 418, 433, 868, 916MHz, 2.4GHz Comes standard in black


PERMANENT-MOUNT ANTENNAS

PMB Series Antenna

PMA Series 1/4-wave whip antennas combine outstanding value and unique style. The stylish package is resistantto damage and abuse thanks to its highly flexible internal element. The PMA mounts to a PCB via a single screwand meets Part 15 requirements.

PMA Series Antenna

PMC Series 1/4-wave antennas combine a blade-type element with a rugged package that is resistant to damageand abuse. The antennas feature a heavy-duty mounting base and the element can be rotated 360°. The PMC mountsto a PCB via a single screw and meets Part 15 requirements.

PMB Series antennas combine a soft blade-type element with a rugged package that is resistant to damage andabuse. The antenna features a molded tab that allows coding of the product’s enclosure to control 360-degreerotational travel. The PMB mounts to a PCB via one or two screws and meets Part 15 requirements.

PMC Series Antenna

Designed for permanent attachment, the PML 1/2-wave whip tilts 180 degrees and delivers outstanding performancein a cost-effective package. An internal counterpoise eliminates external ground plane dependence and maximizesperformance. The antenna is attached by placing its base through a 1/4” hole in the product and securing it with anut or by threading it into a PEM-style insert. This method of attachment is highly secure and saves the cost of anantenna connector. The PML attaches to a PCB or connector via 8.5” of RG-178 coax cable. Custom lengths andterminations are available by special order.

PML Series Antenna


200-999 $5.37

1,000-4,999 $4.64

5,000+ CallPart # ANT-***-PML*** = 868, 916MHz Comes standard in black


200-999 $1.60

1,000-4,999 $1.52

5,000+ CallPart # ANT-***-PMA*** = 868, 916MHz Comes standard in black


200-999 $2.40

1,000-4,999 $2.28

5,000+ CallPart # ANT-***-PMB*** = 868, 916MHz Comes standard in charcoal grey


200-999 $2.59

1,000-4,999 $2.35

5,000+ CallPart # ANT-***-PMC*** = 868, 916MHz Comes standard in black

• Cost-effective• Internal counterpoise• Tilts 180 degrees• Outstanding performance• Omni-directional pattern• Low VSWR• Integral 8½-inch RG-178 coax cable

• Low cost• Omni-directional pattern• Fully weatherized• Flexible main shaft• Rugged & damage-resistant• Screw-mount

• Low cost• Soft blade-type element• Rotates 360 degrees• Omni-directional pattern• Weather resistant• Flexible main shaft• Damage-resistant• Screw-mount

• Low cost• Heavy-duty blade-type element• Rotates 360 degrees• Omni-directional pattern• Weather resistant• Flexible main shaft• Screw-mount


CONNECTORIZED ANTENNASAntenna Factor’s connectorized antennas feature Part 15 compliant RP-SMA connectors that allow removal of the antenna forreplacement or transport. Connector City offers a wide variety of PCB and chassis-mount mating connectors. Many of the antennasalso feature reduced-height packages, which are significantly more compact than a straight “whip” style. Reduced-height antennasprovide excellent performance; however, their operational bandwidth is narrower than a straight whip (typically 20-40MHz).

Quantity 315 - 916MHz 2.4GHz<200 $4.73 $3.47

200-999 $4.39 $3.22

1,000-4,999 $3.94 $2.89

5,000+ Call CallPart # ANT-***-CW-RH-xxx*** = 315, 418, 433, 868, 916MHz, 2.4GHz

xxx = Blank for RP-SMA connector; SMA for SMA connectorComes standard in black; custom colors available in production quantities

The RH Series utilizes a helical element to greatly reduce the physical length of the antenna housing. They areideal for small products where cosmetic or functional requirements dictate a compact, aesthetically pleasing antennapackage. Despite their tiny size, RH Series antennas are ruggedly constructed and able to withstand punishingenvironments just like our larger whips. RH Series antennas attach via a Part 15 compliant RP-SMA connector.The 2.45GHz version is also available with a standard SMA connector.

• Reduced-height helical whip• Excellent performance• Omni-directional pattern• Very low VSWR• Heavy-duty construction• Damage-resistant• Fully weatherized• Flexible main shaft• Part 15 compliant RP-SMA connector• Use with plastic* or metal enclosures


HD Series Heavy Duty Antenna


200-999 $5.13

1,000-4,999 $4.63

5,000+ CallPart # ANT-***-CW-HD*** = 315, 418, 433, 868, 916MHzComes standard in black; custom colors available in production quantities

This reduced-height 1/4-wave antenna is ready for years of use thanks to a flexible internal helical that is overmoldedwith a heavy-duty protective jacket. It’s an excellent choice for outdoor applications or for use in adverse environmentswhere the antenna must resist shock, harsh weather, and tampering. HD Series antennas attach via an FCC Part15 compliant RP-SMA connector.

Actual SizeRH Series Reduced-Height Antenna

Quantity 418 433 868 916 2.4<200 $5.74 $5.61 $5.48 $5.36 $5.75

200-999 $5.51 $5.39 $5.27 $5.15 $5.31

1,000-4,999 $4.93 $4.82 $4.71 $4.60 $4.97

5,000+ Call Call Call Call CallPart # ANT-***-CW-QW*** = 418, 433, 868, 916MHz

xxx = Blank for RP-SMA connector

SMA for SMA connector (916MHz, 2.4GHz only)Comes standard in black; custom colors available in production quantities

CW Series Whip AntennaCW Series 1/4-wave antennas deliver outstanding performance in a rugged and cosmetically attractive package.These antennas feature an FCC Part 15 compliant RP-SMA connector. This simplifies packaging and shipment,allowing for easy field replacement while complying with FCC requirements. A wide variety of matching connectorsallows for numerous mounting options. The 916MHz and 2.4GHz versions are also available with a standard SMAconnector. The 2.4GHz version is 1/2-wave, the rest are 1/4-wave.

• Low cost• Excellent performance• Omni-directional pattern• Wide bandwidth• Very low VSWR• Fully weatherized• Flexible main shaft• Rugged & damage-resistant• Part 15 compliant RP-SMA connector• Use with plastic* or metal enclosures


• Reduced-height helical whip• Excellent performance• Omni-directional pattern• Low VSWR• Fully weatherized• Rugged & damage-resistant• Part 15 compliant RP-SMA connector• Standard SMA connector available for 2.45GHz• Available in black or custom colors• Use with plastic* or metal enclosures


RP-SMA

Standard SMA connector is available at 916MHz. Call for pricing.

SMA RP-SMA(916, 2.4 Only)

SMA RP-SMA


CONNECTORIZED ANTENNAS

HW Series 1/2-wave center-fed dipole antennas deliver outstanding performance in a rugged and cosmeticallyattractive package. allows the antenna to tilt 90 degrees and rotate 360 degrees. The 315, 418, and 433MHzversions have a 1/4-wave element. The 868 and 916MHz versions have a center-fed 1/2-wave element with an internalground reference which reduces external ground plane dependence and maximizes performance. HW Seriesantennas attach via a standard SMA or Part 15 compliant RP-SMA connector. Custom colors and connectors areavailable for volume OEM customers.

• Low cost• Internal counterpoise• Excellent performance• Omni-directional pattern• Outstanding VSWR• Rugged & damage-resistant• Part 15 compliant RP-SMA connector


200-999 $5.48

1,000-4,999 $5.23

5,000+ CallPart # ANT-***-CW-HW-xxx*** = 315, 418, 433, 868, 916MHz

xxx = SMA (SMA) or Blank (RP-SMA) connectorComes standard in black; custom colors available in production quantities

HW Series 1/2-Wave Dipole Antenna

SMA RP-SMA

• Internal counterpoise• Excellent performance• Omni-directional pattern• Very low VSWR• Fully weatherized• Rugged & damage-resistant• Standard SMA or Part 15 compliant RP-SMA connector

CT Series 1/2-Wave Dipole Antenna


200-999 $4.41

1,000-4,999 $3.96

5,000+ CallPart # ANT-2.4-CW-CT-xxxxxx = SMA (SMA) or RPS (RP-SMA) connectorComes standard in black; custom colors available in production quantities

The CT Series 1/2-wave 2.4GHz antenna delivers outstanding performance in a rugged and cosmetically-attractivepackage. The antenna’s internal counterpoise eliminates external ground plane dependence and maximizesperformance. CT Series antennas attach using a standard SMA or Part 15 compliant RP-SMA connector, thoughalternate connectors and custom colors are available for volume OEM customers.

SMA RP-SMA


RIGHT-ANGLE CONNECTORIZED ANTENNASAntenna Factor’s connectorized antennas feature Part 15 compliant right-angle RP-SMA connectors to allow removal for replacementor transport. Many of the antennas also feature reduced-height packages that are significantly more compact than a straight “whip”style. Reduced-height antennas provide excellent performance; however, their operational bandwidth is narrower than a straightwhip (typically 20-40MHz), so greater care should be exercised in layout and placement.

*Note* The listed frequencies are the antenna’s typical center frequencies.

The RCS Series is ideally suited for products requiring an attractive, yet compact, 1/4-wave antenna in a right-angle form factor.The antennas attach via a Part 15 compliant RP-SMA connector. The 2.45GHz version is also available with a standard SMAconnector.

RCS Series Ultra-Compact Right-Angle Antenna


200-999 $4.49

1,000-4,999 $4.03

5,000+ CallPart # ANT-***-CW-RCS-xxx *** = 315, 418, 433, 868, 916MHz, 2.4GHz


SMA for SMA connector (2.4GHz only)Comes standard in black; custom colors available in production quantities

• Reduced-height helical whip• Right-angle mount• Excellent performance• Omni-directional pattern• Fully weatherized• Part 15 compliant RP-SMA connector• Standard SMA connector available for 2.45GHz• Use with plastic* or metal enclosures


RAH Series Right-Angle AntennaThe RAH Series utilizes a helical element to greatly reduce the physical length of the antenna housing. They are ideal for productsrequiring an ultra-compact, aesthetically pleasing 1/4-wave antenna in a right-angle form factor. Despite their tiny size, they areruggedly constructed and able to withstand punishing environments just like our larger whips. The antennas attach via a Part 15compliant RP-SMA connector. The 2.45GHz version is also available with a standard SMA connector.

• Low cost• Ultra-compact• Right-angle mount• Excellent performance• Omni-directional pattern• Fully weatherized• Flexible main shaft• Rugged & damage-resistant• Part 15 compliant RP-SMA connector• Use with plastic* or metal enclosures


Actual Size

SMA RP-SMA(2.45GHz Only)

The RCL Series is useful in products where additional height above the product’s case is needed or a slightly wider operationalbandwidth is desired. The 2.45GHz version has a center-fed 1/2-wave element with an internal ground reference. The 916MHz versionhas a 1/4-wave element. The antennas attach via a Part 15 compliant RP-SMA connector.

RCL Series Compact Right-Angle Antenna


200-999 $4.88

1,000-4,999 $4.38

5,000+ CallPart # ANT-***-CW-RCL*** = 916MHz, 2.4GHz Comes standard in black; custom colors available in production quantities

• Right-angle mount• Excellent performance• Omni-directional pattern• Fully weatherized• Rugged & damage-resistant• Part 15 compliant RP-SMA connector• Use with plastic* or metal enclosures

*916MHz requires proximity ground plane*2.45GHz features internal counterpoise

RP-SMA

Quantity 315 - 916MHz 2.4GHz<200 $6.20 $3.57

200-999 $5.75 $3.32

1,000-4,999 $5.16 $2.98

5,000+ Call CallPart # ANT-***-CW-RAH-xxx*** = 315, 418, 433, 868, 916MHz, 2.4GHz


SMA for SMA connector (2.4GHz only)Comes standard in black; custom colors available in production quantities SMA RP-SMA

(2.45GHz Only)


ARTICULATING CONNECTORIZED ANTENNAS

• Internal counterpoise• Tilts and rotates• Excellent performance• Omni-directional pattern• Very low VSWR• Fully weatherized• Rugged & damage-resistant• Standard SMA or Part 15 compliant RP-SMA connector

RCT Series 1/2-Wave Right-Angle Tilt / Swivel Antenna


200-999 $5.75

1,000-4,999 $5.16

5,000+ CallPart # ANT-2.4-CW-RCT-xxxx = SS (SMA) or RP (RP-SMA) connectorComes standard in black; custom colors available in production quantities

The RCT Series 1/2-wave antenna delivers outstanding performance with an innovative articulating base that allows it to tilt 90°and rotate 360° for optimum orientation. The antenna’s internal counterpoise eliminates external ground plane dependence andmaximizes performance. The RCT attaches via a standard SMA or Part 15 compliant RP-SMA connector.

SMA RP-SMA

RAF Series Dual-Band Right-Angle Tilt / Swivel Antenna


200-999 $6.27

1,000-4,999 $5.48

5,000+ CallPart # ANT-DB1-RAF-xxxxxx = blank (RP-SMA) or SMA (SMA) connectorComes standard in black; custom colors available in production quantities

SMA RP-SMA

• Tilts and rotates• Dual-band (2.45GHz and 5.8GHz) • Excellent performance• Omni-directional pattern• Very low VSWR• Rugged & damage-resistant• Standard SMA or Part 15 compliant RP-SMA

connector

The RAF is a compact, cosmetically attractive, dual-band, 1/2-wave antenna covering the popular 2.45 and emerging 5.8GHzbands. The antenna features a tilt and swivel joint which allows it to be oriented at straight or right angles to the product orconveniently folded for storage and shipment. It attaches using an SMA or Part 15 compliant RP-SMA connector.

HWR Series 1/2-Wave Right-Angle Tilt / Swivel Antenna


200-999 $6.57

1,000-4,999 $6.30

5,000+ CallPart # ANT-***-CW-HWR-xxx*** = 315, 418, 433, 868, 916MHz, 1.4GHz

xxx = SMA (SMA) or RPS (RP-SMA) connectorComes standard in black; custom colors available in production quantities

HWR Series antennas deliver outstanding performance in a rugged and cosmetically attractive package. Thearticulating base allows the antenna to tilt 90 degrees and rotate 360 degrees. The 315, 418, and 433MHz versionshave a 1/4-wave element. The 868 and 916MHz versions have a center-fed 1/2-wave element with an internalground reference. The antennas attach via a standard SMA or Part 15 compliant RP-SMA connector. Custom colorsand connectors are available for volume OEM customers.

• Low cost• Tilts and rotates• Omni-directional pattern• Outstanding VSWR• Rugged & damage-resistant• Standard SMA or Part 15 compliant RP-

SMA connector• Custom terminations for volume OEMs• Use with plastic* or metal enclosures

*315, 418, 433MHz require proximity ground plane*868, 916MHz, 1.4GHz feature internal counterpoise

SMA RP-SMA


INTERNAL ANTENNAS

HE Series antennas are designed for direct PCB mounting. Thanks to the HE’s compact size, they are ideal for internal concealmentinside a product’s housing. The HE is also very low in cost, making it well suited to high-volume applications.*NOTE* HE Series antennas have a very narrow bandwidth (approximately 10MHz of the specified center frequency); thus, care in placement andlayout is required. In addition, they are not as efficient as whip-style antennas, so they are generally better suited for use on the transmitter endwhere attenuation is often required anyway. Use on both transmitter and receiver ends is recommended only in instances where a short range (<30%of whip style) is acceptable.

The Splatch uses a grounded-line technique to achieve outstanding performance from a tiny surface mount element. This uniqueantenna is designed for hand- or reflow-mounting directly to a product’s circuit board. Its low cost makes it ideal for volumeapplications. Unlike many compact antennas, the Splatch exhibits good proximity performance, making it an appropriate choicefor handheld applications such as remote controls, pagers, and alert devices.

Surface StyleThrough-Hole StyleEnd Views

HE (Helical Element) Series Antenna

SP Series SMD Planar Antenna (The “Splatch”)

• Very low cost• Compact for physical concealment• Precision-wound coil• Rugged phosphor-bronze construction• Surface-mount and through-hole mount styles

• Very low cost• Ultra-compact package• Direct PCB attachment• Ideal for concealed / internal mounting• Perfect for compact portable devices• Suitable for hand- or reflow-assembly• Resistant to proximity effects

Quantity Price (All Frequencies) <200 $0.67

200-999 $0.48

1,000-4,999 $0.30

5,000+ CallPart # ANT-***-HETH (Through-Hole)

ANT-***-HESM (Surface-Mount)*** = 315, 418, 433, 916MHzAntenna dimensions may vary by frequency


200-999 $1.38

1,000-4,999 $1.25

5,000+ CallPart # ANT-***-SP*** = 315, 403, 418, 433, 458, 868, 916MHz

The size, cosmetic, or physical requirements of many wireless designs precludes the use of traditional antenna styles. To meetthe unique antenna needs of many product designs, Antenna Factor offers a variety of antennas designed for internal mounting.

The exciting CHP Series is among the world’s smallest high-performance chip antennas. Favorable electrical specifications, stability,and cost-effectiveness make the CHP Series the logical choice for a wide variety of applications, including Bluetooth, 802.11,home RF, ZigBee, and other popular and emerging standards. The antennas use advanced multilayer LTCC technology and aproprietary hybrid element to achieve size and performance characteristics superior to other designs. The incredibly compact SMDpackage measures a mere 6.5mm (L) x 2.2mm (W) x 1.0mm (H) and is fully compatible with hand- and reflow-attachment processes.

CHP Series Antenna

• Outstanding cost-effectiveness• Incredibly compact SMD package• Superior LTCC technology• Low loss • Wide bandwidth • 50-ohm characteristic impedance • Favorable linear polarization • No external matching required • Highly stable over temperature and time • Fully hand- and reflow-assembly compatible• RoHS compliant

Actual Size

Side View

Quantity 868MHz 916MHz 2.45GHz<200 $3.51 $3.51 $1.45

200-999 $3.24 $3.24 $1.28

1,000-4,999 $3.11 $3.11 $1.14

5,000+ Call Call CallPart # ANT-***-CHP-x*** = 868MHz, 916MHz, 2.45GHz

x = T (Tape / Reel), B (Bulk <1,500 pcs.)2.45GHz

868MHz 916MHzCOMPLIAN

T

RoHS


ANTENNA EVALUATION KITS

Part # Description PricePAEK-*** Permanent-Mount Antenna Evaluation Kit $49.95*** = 418, 433, 868, 916MHz

Kit Includes:• 2 PW-QW Series permanent-mount antennas• 2 LP Series reduced-height antennas• 2 RA Series right-angle tilt-swivel antennas• 2 SP Series SMD planar antennas• 2 JJB Series ultra-miniature antennas (868, 916MHz only)

Permanent-Mount Antenna Evaluation Kit

Kit Includes:1/4-wave whip antennas• 2 RH Series reduced-height antennas• 2 HD Series heavy-duty antennas• 2 CW Series connectorized antennas• 2 RCS Series right-angle antennas (916MHz only)• 2 RCL Series right-angle antennas (916MHz only)

Connectorized Antenna Evaluation KitCompare whip antenna styles and performance. This handy kit contains two (2) of each whip-antenna style at the frequency of your choice and a sampling of Linx RP-SMA connectors.

Compare whip antenna styles and performance. This handy kit contains two (2) of eachpermanent-mount 1/4-wave antenna styles at the frequency of your choice.

Kit Includes:• 6 Chip antennas• 1 Evaluation board• 1 Antenna data guide

Chip Antenna Evaluation KitThis handy kit contains six (6) chip antennas and a test board to allow you to evaluate theperformance of the chip antenna.

Actual Size

Part # Description PriceCAEK-*** Connectorized Antenna Evaluation Kit $49.95*** = 418, 433, 868, 916MHz

Part # Description PriceAEK-***-CHP Chip Antenna Evaluation Kit $18.95*** = 868, 916MHz, 2.4GHz

Kit Includes:• 6 SP Series antennas*• 1 Evaluation board• 1 Antenna data guide

SP Series Antenna Evaluation KitThis handy kit contains six (6) SP Series antennas and a test board to allow you to evaluatethe performance of the antenna.

Part # Description PriceAEK-***-SP SP Series Antenna Evaluation Kit $18.95*** = 315, 403, 418, 433, 458, 868, 916MHz

RP-SMA Connectors• 2 Right-angle• 2 Vertical PCB• 2 Bulkhead• 2 PCB edge-mount• 2 Multi-mount

* Listed quantity includes those populated on test board

* Listed quantity includes those populated on test board


SPECIALTY ANTENNAS

Ant-Skins Antenna Covers

Quantity Price (All Lengths)<200 $0.74

200-999 $0.59

1,000-4,999 $0.50

5,000+ CallPart # ANT-SKN-V1-xxxxxxxx = 1.50, 3.15, 4.25in Comes standard in black

These low-cost sleeves provide the external ruggedness and cosmetic appeal of expensive whip antennas but are hollow to coverthe low-cost internal element of a user’s choosing, such as a wire, rod, or flexible shaft. The sleeve is designed to allow a widerange of mounting options in metal or plastic housings of various thicknesses. Ant-skins can also reduce your parts inventory sincea wide range of frequency lengths can be accommodated by a single sleeve.

• Recesses provided to accommodate 6 different thicknesses of case materials bysimply “pulling” the ant-skin through thecase until it is in the correct position

• Generous cavity to accommodate many different elements including flexible cable,wire, or rod

• Squared base for permanent spin-proofmounting option

• Cost-effective• Provides a cosmetically attractive, profes-

sional appearance

The WRT Series antenna is ideally suited for applications such as wireless vending, security, traffic, or power equipment whichrequire an unobtrusive, tamper-resistant antenna solution. The tiny 19 x 11mm radome installs through a small hole on the productand is anchored by a threaded base. An adhesive foam compression ring is used to resist the elements. The antenna also featuresan integral counterpoise, which eliminates the need for a proximity ground plane. The antenna's coax feed is available with SMAor RP-SMA terminations. Alternate coax lengths, connectors, and custom colors are available for volume OEM customers.

• Low cost• Unobtrusive• Tamper resistant• Integral counterpoise• Indoor / outdoor• Adhesive or permanent mount

WRT Series Antenna


200-999 $8.21

1,000-4,999 $7.88

5,000+ CallPart # ANT-***-WRT-xxx*** = 868MHz, 916MHz, 2.45GHz

xxx = SMA (SMA) or RPS (RP-SMA) connector

NEW


STICK-ON ANTENNASThese antennas are designed for mounting on flat, non-conductive surfaces such as windows, drywall, ceiling tiles, plastic, etc.Their compact size and unobtrusive appearance make them well suited to a wide range of applications, from automotive interiorsto in-building networks.

HDP Series Dual-Band Stick-On Antenna


200-999 $5.63

1,000-4,999 $5.06

5,000+ CallPart # ANT-DB1-HDP-xxxxxx = RPS, TNC Comes standard in black

The HDP is a compact, center-fed, dual-band antenna covering the 860 to 960MHz and 1.77 to 1.88GHz bands. Its durable,unobtrusive housing sticks permanently with integral adhesive to flat, non-conductive surfaces such as windows, drywall, ceilingtiles, plastic, etc. The antenna is supplied with 9.8 feet (3m) of RG-174 cable and attaches via a TNC or Part 15 compliant RP-SMA connector.

VDP Series Tri-Band Stick-On Antenna


200-999 $5.85

1,000-4,999 $5.29

5,000+ CallPart # ANT-DB1-VDP-xxxxxx = RPS, TNC Comes standard in black

The VDP is a compact, tri-band antenna covering the 860 to 960MHz, 1.77 to 1.88GHz, and 2.45GHz bands. Its durable,unobtrusive housing sticks permanently with integral adhesive to flat, non-conductive surfaces such as windows, drywall, ceilingtiles, plastic, etc. The antenna is supplied with 9.8 feet (3m) of RG-174 cable center-fed from the bottom. The VDP attaches via aTNC or Part 15 compliant RP-SMA connector.

MHW Series AntennaMHW Series dipole antennas feature a durable, unobtrusive housing that sticks permanently with integral adhesive to flat, non-conductive surfaces such as windows, drywall, ceiling tiles, plastic, etc. The antennas are well suited to low-power devices, butare capable of operation at levels to 10 watts. The MHW is supplied with either 6.5 feet (2m) or 15 feet (4.6m) of RG-174 cableand attaches via a standard SMA or Part 15 compliant RP-SMA connector. Custom cable lengths and connectors are availablefor volume OEM customers.


200-999 $7.18

1,000-4,999 $6.32

5,000+ CallPart # ANT-***-MHW-RPS-x

ANT-***-MHW-SMA-x*** = 418, 433, 916MHz, x = “S” for Short cable, “L” for Long cable Comes standard in black

• Compact & unobtrusive• Adhesive for flat surfaces• Excellent performance• Omni-directional pattern• Very low VSWR• Two flexible shafts• Rugged & damage-resistant• 6.5- or 15-foot RG-174 coax cable• Standard SMA or Part 15 compliant RP-SMA connector• Custom lengths and terminations for volume OEMs

• Dual-band (860-960MHz and 1.77-1.88GHz)• Center-fed• Compact & unobtrusive• Adhesive for flat surfaces• Excellent performance• Omni-directional pattern• Low VSWR• Fully weatherized• Rugged & damage-resistant• 9.8-foot RG-174 coax cable• TNC or Part 15 compliant RP-SMA connector

• Tri-band (860-960MHz, 1.77-1.88GHz, and 2.45GHz)• Center-fed from the bottom• Compact & unobtrusive• Adhesive for flat surfaces• Excellent performance• Omni-directional pattern• Low VSWR• Fully weatherized• Rugged & damage-resistant• 9.8-foot RG-174 coax cable• TNC or Part 15 compliant RP-SMA connector


MAGNETIC-MOUNT ANTENNA SYSTEM

THROUGH-HOLE MOUNT ANTENNAS

The Magnetic-Mount Antenna system allows customers to select between 40, 66, or 85mm bases that contain a powerful magnetsuitable for semi-permanent installation on metal surfaces. The base is covered with a thin protective layer to protect finishedsurfaces, such as those on automobiles. Completing the system is a variety of interchangeable elements covering frequencies from824MHz to 2.4GHz. The base is supplied with 13.1ft of RG-58 coax cable terminated in a TNC or RG-174 coax cable terminatedin an RP-SMA connector. Other cable terminations are available on volume OEM orders.

Part # S01-011 S01-010 S01-005 S01-006 S01-008 S01-012Frequency 2.4GHz 860-960MHz 860-960MHz 824-960MHz 824-960MHz 824-896MHzRange 1.7-1.8GHz 1.9GHzGain 0dBi 0dBi 3dBi 5dBi 3dBi 5dBi

B50

B66

B85

Quantity S01-005 S01-006 S01-008 S01-010 S01-011 S01-012 B50 B66 B85

<200 $2.25 $2.70 $2.90 $2.22 $2.20 $3.90 $4.40 $4.95 $5.50

200-999 $1.88 $2.25 $2.50 $1.85 $1.83 $3.60 $4.20 $4.73 $5.25

1,000-4,999 $1.69 $2.03 $2.25 $1.66 $1.64 $3.37 $3.70 $4.16 $4.63

5,000+ Call Call Call Call Call Call Call Call Call

Part # ANT-ELE-S01-xxx xxx = Last 3 part numbers above ANT-MAG-Bxx-xxxComes standard in black xx= 50, 66, 85mm base xxx = RPS or TNC connector

RMS Series Dual-Band Through-Hole Mount Antenna


200-999 $7.80

1,000-4,999 $7.15

5,000+ CallPart # ANT-DB1-RMS-xxxxxx = RPS, TNC Comes standard in black

The RMS is a compact, unobtrusive, dual-band antenna covering the 860 to 960MHz and 1.77 to 1.88GHz bands. Its durable,unobtrusive housing is designed for permanent mounting through a metal surface such as an automobile roof or trunk. The antennais supplied with 14 feet (4.3m) of RG-58 cable and attaches via a TNC or Part 15 compliant RP-SMA connector.

RMT “Techno” Series Dual-Band Through-Hole Mount Antenna


200-999 $6.80

1,000-4,999 $6.44

5,000+ CallPart # ANT-DB1-RMT-xxxxxx = RPS, TNC Comes standard in black

The RMT is a futuristic-looking dual-band antenna covering the 860 to 960MHz and 1.77 to 1.88GHz bands. Its compact, durablehousing is designed for permanent mounting through a metal surface such as an automobile roof or trunk. The antenna is suppliedwith 14 feet (4.3m) of RG-58 cable and attaches via a TNC or Part 15 compliant RP-SMA connector.

Magnetic-Mount Antenna System

• Dual-band (860-960MHz and 1.77-1.88GHz)• Compact & unobtrusive• Through-hole mount• Excellent performance• Omni-directional pattern• Fully weatherized• Flexible main shaft• Rugged & damage-resistant• 14-foot RG-58 coax cable

• Dual-band (860-960MHz and 1.77-1.88GHz)• Futuristic appearance• Through-hole mount• Excellent performance• Omni-directional pattern• Low VSWR• Fully weatherized• Flexible main shaft• Rugged & damage-resistant• 14-foot RG-58 coax cable

The RMG Series combines a high-performance internal GPS antenna with a connector for mounting asecondary antenna. A wide range of connectorized antennas can be attached enabling the coverage of allpopular frequencies. The GPS antenna and connector are housed in a sleek, durable base intended forpermanent through-hole mounting. A 5m RG-174 cable is provided foreach antenna and each may be terminated in a variety of connectortypes. The cables feed through a threaded metal post with a compressiongasket, which resists the intrusion of water or dirt, and protects theattachment surface.


GPS ANTENNASGPS capabilities are being integrated into a diverse array of products. As with any RF system, the antenna plays a critical role inthe performance and reliability of the product. Antenna Factor offers a variety of high-performance, low-cost GPS antennas to meetthe needs of this rapidly expanding market. Additional cable terminations are available to volume OEM customers by special order.

SH Series Active GPS Antenna

UC Series Active GPS Antenna

• Compact• High-gain, low-noise design• Low current consumption• Wide operating voltage• Wide operating temperature• Fully weatherized• Rugged & damage-resistant• Magnetic mount

• Compact• High-gain, low-noise design• Low current consumption• Wide operating voltage• Protection circuit• Wide operating temperature• Fully weatherized• Rugged & damage-resistant• Magnetic and / or screw mount


200-999 $23.80

1,000-4,999 $19.20

5,000+ CallPart # ANT-GPS-SH-xxxxxx = SMA, MCX, MMX


200-999 $19.76

1,000-4,999 $17.25

5,000+ CallPart # ANT-GPS-UC-xxxxxx = SMA, MCX

UC Series GPS antennas deliver high-gain, low-noise performance in a rugged and cosmetically attractivepackage. They feature a wide operating temperature, wide operating voltage, and low current consumption. Theantennas attach via a standard SMA or MCX connector.

SH Series GPS antennas combine superior performance, advanced operational and protection features, and lowpower consumption. The SH accepts supply voltages from +2.5VDC to +12VDC and is protected against shorts, overcurrent, or reverse polarity situations. The antennas attach via a SMA, MCX, or MMCX connector.

• On-board amplified GPS antenna• Connector for second antenna element• Wide range of secondary frequencies• Rugged and water-resistant• Separate RG-174 cables for each antenna• Threaded metal stud mount• Standard and custom cable terminations


200-999 $27.80

1,000-4,999 $26.80

5,000+ CallPart # ANT-DB2-RMG-xx-yy-zzxx = Antenna Connector; RP-SMA* (RP), SMA* (SM)

yy = Antenna Cable; RP-SMA* (RP), SMA (SM), MCX (MC)

zz = GPS Cable; SMA* (SM), MCX (MC), FME (FM)

RMG Series GPS Antenna and Base

* = Standard Connector


BASE STATION ANTENNAS

Center Frequency 2442MHzFrequency Range 2400-2483MHzBandwidth 83MHzImpedance 50ΩPolarization Vert. or horiz.VSWR <1.5F/B Ratio >16dB

Gain 9.5dBiBeamwidth 50° HMax. Power 100WWeight 1.4lbsConnector N-Style FemaleElement Material Stainless SteelMax. Wind Velocity 60m/s

2.4GHz 6-Element Yagi Antenna

2.4GHz 12-Element Yagi Antenna

418MHz 5-Element Yagi Antenna

ELECTRICAL SPECIFICATIONS

Center Frequency 2442MHzFrequency Range 2400-2483MHzBandwidth 83MHzImpedance 50ΩPolarization Vert. or horiz.VSWR <1.5F/B Ratio 18dB

Gain 12dBiBeamwidth 36°Max. Power 100WWeight 1.32lbsConnector N-Style FemaleElement Material Stainless SteelMax. Wind Velocity 60m/s


Center Frequency 418MHzFrequency Range 397-439MHzBandwidth 28MHzImpedance 50ΩPolarization Vert. or horiz.VSWR <1.5F/B Ratio >14dB



*NOTE* Use of these antennas may result in TX and RX emission levels in excess of legal limits

Antenna Factor offers Yagi antennas in models covering frequencies from 400MHz to 2.45GHz. These antennas are designed forlong distance directional communication and can greatly enhance the performance of RF links. Made of stainless steel and featuringsturdy mast mounts, these rugged antennas are constructed to withstand the stress of long-term use. All antennas are designedfor 50-ohm system matches with maximum inputs of 100W. See Connector City for stock extension cables.


200-999 $58.30

1,000-4,999 $54.95

5,000+ CallPart # ANT-418-YG5-N


200-999 $58.30

1,000-4,999 $54.95

5,000+ CallPart # ANT-916-YG5-N


200-999 $58.30

1,000-4,999 $54.95

5,000+ CallPart # ANT-2.4-YG6-N


200-999 $84.70

1,000-4,999 $79.45

5,000+ CallPart # ANT-2.4-YG12-N

Center Frequency 916MHzFrequency Range 881-951MHzBandwidth 70MHzImpedance 50ΩPolarization Vert. or horiz.VSWR <1.5F/B Ratio 14dB



916MHz 5-Element Yagi Antenna


BASE STATION ANTENNAS

Corner Antennas

ITEM SPECIFICATION

Model ANT-916-CN-N ANT-2.4-CN-N

Center Frequency 916MHz 2442MHz

Frequency Range 881-951MHz 2400-2483MHz

Bandwidth 72MHz 264MHz

Gain 10.2dBi 11dBi

Horizontal Beamwidth 58° H, 52° V 58° H, 54° V

Weight 2.6lbs 1.75lbs

VSWR <1.5

F/B Ratio >25dB

Polarization Vertical

Impedance 50Ω

Max. Power 100W

Cable RG-8/U

Connector N-Style Female (other connectors available for volume applications)

Antenna Factor “corner-style” antennas feature a wide >70MHz bandwidth, 25dB front-to-back ratio, high gain, and a widebeamwidth. They are designed for 50-ohm system matches with a maximum input of 100W. *NOTE* Use of these antennas may result in TX and RX emission levels in excess of legal limits


200-999 $69.80

1,000-4,999 $64.95

5,000+ CallPart # Description

ANT-916-CN-N 916MHz Corner Antenna

ANT-2.4-CN-N 2.45GHz Corner Antenna



www.connectorci ty .com

RP-SMA CONNECTORSLinx offers a variety of cost-effective PCB, cable-end, and bulkhead Reverse-Polarity SMA (RP-SMA) connectors. These high-qualityconnectors are designed to mate with RP-SMA antennas, such as the Antenna Factor CW, RH, and HD Series. In order to ensurethe acceptability of RP-SMA connectors under FCC Part 15.203, these connectors are available only to qualified OEM customers.These connectors are not available for sale to the general public. Dimension drawings are available from the Connector Citywebsite at www.connectorcity.com.

CONREVSMA001Female PCB Mount

CONREVSMA004Female Rear Mount Bulkhead (Solder Cup)

CONREVSMA006.031CONREVSMA006.062CONREVSMA006.062SQFemale PCB Edge Multi-Mount(for board thicknesses of 0.031” and 0.062”)

CONREVSMA007Male Cable End Crimp for RG-174, 178, 58

CONREVSMA008Extended Female PCB Mount

CONREVSMA009Right-Angle Female PCB Edge Multi-Mount

Part # <200 200-999 1,000-5,000

CONREVSMA001 $2.30 $2.09 $1.88

CONREVSMA002Female Right-Angle PCB Mount

CONREVSMA010Right-Angle Male - Female Adapter

CONREVSMA003.031CONREVSMA003.062Female PCB Edge-Mount(for board thicknesses of 0.031” and 0.062”)

Part # <200 200-999 1,000-5,000

CONREVSMA002 $2.60 $2.36 $2.13

Part # <200 200-999 1,000-5,000

CONREVSMA003.031 $2.41 $2.19 $1.97

CONREVSMA003.062 $2.86 $2.60 $2.34

Part # <200 200-999 1,000-5,000

CONREVSMA004 $2.52 $2.30 $2.07

Part # <200 200-999 1,000-5,000

CONREVSMA006.xxx $3.30 $3.00 $2.70

CONREVSMA006.062SQ $4.04 $3.68 $3.31

Part # <200 200-999 1,000-5,000

CONREVSMA008 $2.90 $2.63 $2.37

Part # <200 200-999 1,000-5,000

CONREVSMA009 $4.08 $3.71 $3.34

Part # <200 200-999 1,000-5,000

CONREVSMA010 $3.42 $3.11 $2.79

Part # <200 200-999 1,000-5,000

CONREVSMA007 $2.45 $2.23 $2.00

CONREVSMA007-R178 $2.45 $2.23 $2.00

CONREVSMA007-R58 $2.45 $2.23 $2.00

CONREVSMA005Female Bulkhead Rear Mount Cable End Crimp(for RG-174, 178, 58)

CONREVSMA002-LFemale Right-Angle PCB Mount - Extended

CONREVSMA001-SMDFemale Surface Mount

CONREVSMA003.031-LCONREVSMA003.062-LFemale PCB Edge-Mount - Extended(for board thicknesses of 0.031” and 0.062”)

Part # <200 200-999 1,000-5,000

CONREVSMA001-SMD $3.18 $2.89 $2.60

Part # <200 200-999 1,000-5,000

CONREVSMA002-L $3.27 $2.97 $2.67

Part # <200 200-999 1,000-5,000

CONREVSMA003.031-L $3.68 $3.34 $3.01

CONREVSMA003.062-L $3.68 $3.34 $3.01

Part # <200 200-999 1,000-5,000

CONREVSMA005 $3.51 $3.19 $2.87

CONREVSMA005-R178 N/A N/A $3.04




RP-SMA CONNECTORS

CONREVSMA012Right-Angle Male Cable End Crimp(for RG-174, 178, 58)

Part # <200 200-999 1,000-5,000

CONREVSMA012 $3.68 $3.34 $3.01


CONREVSMA012-R58 $3.68 $3.34 $3.01

CONREVSMA013.031CONREVSMA013.062Male PCB Edge-Mount(for board thicknesses of 0.031” and 0.062”)

Part # <200 200-999 1,000-5,000

CONREVSMA013.031 $5.92 $5.38 $4.84

CONREVSMA013.062 $5.92 $5.38 $4.84

Part # <200 200-999 1,000-5,000

CONREVSMA014 $3.18 $2.89 $2.60

CONREVSMA014-R178 $3.18 $2.89 $2.60

CONREVSMA014-R58 $3.18 $2.89 $2.60

CONREVSMA014Female Bulkhead Rear Mount Cable End Crimpwith O-Ring (for RG-174, 178, 58)

CONREVSMA015Female Bulkhead Front Mount Cable End Crimpwith O-Ring (for RG-174, 178, 58)

CONREVSMA011Female Cable End Crimp (for RG-174, 178, 58)

Part # <200 200-999 1,000-5,000

CONREVSMA011 $1.86 $1.69 $1.52


CONREVSMA011-R58 $2.04 $1.86 $1.67

Part # <200 200-999 1,000-5,000

CONREVSMA015 $3.71 $3.38 $3.04





SMA CONNECTORS

CONSMA001Female PCB Mount

Part # <200 200-999 1,000-5,000

CONSMA001 $2.90 $2.64 $2.38

CONSMA002Female Right-Angle PCB Mount

Part # <200 200-999 1,000-5,000

CONSMA002 $2.90 $2.64 $2.38

CONSMA001-SMDFemale Surface Mount

Part # <200 200-999 1,000-5,000

CONSMA001-SMD $3.53 $3.21 $2.89

CONSMA002-SMDFemale Right-Angle Surface Mount

Part # <200 200-999 1,000-5,000

CONSMA002-SMD $3.27 $2.97 $2.67

CONSMA003.031CONSMA003.062Female PCB Edge-Mount(for board thicknesses of 0.031” and 0.062”)

Part # <200 200-999 1,000-5,000

CONSMA003.031 $2.74 $2.49 $2.24

CONSMA003.062 $2.74 $2.49 $2.24

CONSMA002-LFemale Right-Angle PCB Mount - Extended

CONSMA003.031-LCONSMA003.062-LFemale PCB Edge-Mount - Extended(for board thicknesses of 0.031” and 0.062”)

Part # <200 200-999 1,000-5,000

CONSMA002-L $3.68 $3.34 $3.01

Part # <200 200-999 1,000-5,000

CONSMA003.031-L $4.54 $4.13 $3.71

CONSMA003.062-L $4.54 $4.13 $3.71

CONSMA006.031CONSMA006.062Female PCB Edge Multi-Mount(for board thicknesses of 0.031” and 0.062”)

CONSMA007Male Cable End Crimp (for RG-174, 178, 58)

Part # <200 200-999 1,000-5,000

CONSMA006.031 $4.08 $3.71 $3.34

CONSMA006.062 $4.08 $3.71 $3.34

Part # <200 200-999 1,000-5,000

CONSMA007 $1.82 $1.65 $1.49

CONSMA007-R178 $1.82 $1.65 $1.49

CONSMA007-R58 $1.82 $1.65 $1.49

CONSMA005Female Bulkhead Rear Mount Cable End Crimp(for RG-174, 178, 58)

Part # <200 200-999 1,000-5,000

CONSMA005 $3.68 $3.34 $3.01

CONSMA005-R178 $3.68 $3.34 $3.01

CONSMA005-R58 $2.45 $2.23 $2.00

CONSMA008Extended Female PCB Mount

CONSMA010Right-Angle Male - Female Adapter

Part # <200 200-999 1,000-5,000

CONSMA008 $2.97 $2.70 $2.43

Part # <200 200-999 1,000-5,000

CONSMA010 $4.08 $3.71 $3.34

CONSMA011Female Cable End Crimp (for RG-174, 178, 58)

Part # <200 200-999 1,000-5,000

CONSMA011 $2.18 $1.98 $1.78

CONSMA011-R178 $2.18 $1.98 $1.78

CONSMA011-R58 $2.18 $1.98 $1.78

CONSMA012Right-Angle Male Cable End Crimp(for RG-174, 178, 58)

Part # <200 200-999 1,000-5,000

CONSMA012 $2.64 $2.40 $2.16

CONSMA012-R178 $2.64 $2.40 $2.16

CONSMA012-R58 $2.64 $2.40 $2.16



SMA CONNECTORSCONSMA013.031CONSMA013.062Male PCB Edge-Mount(for board thicknesses of 0.031” and 0.062”)

Part # <200 200-999 1,000-5,000

CONSMA013.031 $3.88 $3.53 $3.17

CONSMA013.062 $3.88 $3.53 $3.17

Part # <200 200-999 1,000-5,000

CONSMA014 $3.68 $3.34 $3.01

CONSMA014-R178 $3.68 $3.34 $3.01

CONSMA014-R58 $3.27 $2.97 $2.67

CONSMA014Female Bulkhead Rear Mount Cable End Crimpwith O-Ring (for RG-174, 178, 58)

CONSMA015Female Bulkhead Front Mount Cable End Crimpwith O-Ring (for RG-174, 178, 58)

Part # <200 200-999 1,000-5,000

CONSMA015 $4.27 $3.88 $3.49

CONSMA015-R178 N/A N/A $3.88

CONSMA015-R58 N/A N/A $3.88

Part # <200 200-999 1,000-5,000

ADP-SMAF-SMAF $3.71 $3.37 $3.03

ADP-SMAF-SMAFFemale to Female Adaptor

Part # <200 200-999 1,000-5,000

ADP-SMAM-SMAM $3.99 $3.63 $3.27

ADP-SMAM-SMAMMale to Male Adaptor



MCX CONNECTORS

CONMCX001Female PCB Mount

Part # <200 200-999 1,000-5,000

CONMCX001 $2.38 $2.16 $1.94

CONMCX002Female Right-Angle PCB Mount

Part # <200 200-999 1,000-5,000

CONMCX002 $2.90 $2.64 $2.38

CONMCX001-SMDFemale Surface Mount

Part # <200 200-999 1,000-5,000

CONMCX001-SMD $2.67 $2.43 $2.19

CONMCX002-SMDFemale Right-Angle Surface Mount

Part # <200 200-999 1,000-5,000

CONMCX002-SMD $3.27 $2.97 $2.67

CONMCX003.031CONMCX003.062Female PCB Edge-Mount(for board thicknesses of 0.031” and 0.062”)

Part # <200 200-999 1,000-5,000

CONMCX003.031 $2.86 $2.60 $2.34

CONMCX003.062 $2.86 $2.60 $2.34

CONMCX003.031-LCONMCX003.062-LFemale PCB Edge-Mount - Extended(for board thicknesses of 0.031” and 0.062”)

Part # <200 200-999 1,000-5,000

CONMCX003.031-L $3.63 $3.30 $2.97

CONMCX003.062-L $3.63 $3.30 $2.97

CONMCX004Female Rear Mount Bulkhead (Solder Pot)

Part # <200 200-999 1,000-5,000

CONMCX004 $3.63 $3.30 $2.97

CONMCX007Male Cable End Crimp (for RG-174, 178)

Part # <200 200-999 1,000-5,000

CONMCX007 $1.82 $1.65 $1.49

CONMCX007-R178 $1.82 $1.65 $1.49

CONMCX005Female Bulkhead Rear Mount Cable End Crimp(for RG-174, 178)

Part # <200 200-999 1,000-5,000

CONMCX005 $3.27 $2.97 $2.67

CONMCX005-R178 $3.27 $2.97 $2.67

CONMCX011Female Cable End Crimp (for RG-174, 178)

Part # <200 200-999 1,000-5,000

CONMCX011 $2.54 $2.31 $2.08

CONMCX011-R178 $2.54 $2.31 $2.08

CONMCX012Right-Angle Male Cable End Crimp(for RG-174, 178)

Part # <200 200-999 1,000-5,000

CONMCX012 $2.74 $2.49 $2.24

CONMCX012-R178 $2.74 $2.49 $2.24



RP-MCX CONNECTORS

CONREVMCX001Female PCB Mount

Part # <200 200-999 1,000-5,000

CONREVMCX001 $2.04 $1.86 $1.67

CONREVMCX002-LFemale Right-Angle PCB Mount - Extended

Part # <200 200-999 1,000-5,000

CONREVMCX002-L $3.18 $2.89 $2.60

CONREVMCX001-SMDFemale Surface Mount

Part # <200 200-999 1,000-5,000

CONREVMCX001-SMD $2.52 $2.29 $2.06

CONREVMCX002-SMDFemale Right-Angle Surface Mount

Part # <200 200-999 1,000-5,000

CONREVMCX002-SMD $3.09 $2.81 $2.53

CONREVMCX003.062Female PCB Edge-Mount(for board thicknesses of 0.062”)

Part # <200 200-999 1,000-5,000

CONREVMCX003.062 $2.26 $2.06 $1.85

CONREVMCX003.062-LFemale PCB Edge-Mount - Extended(for board thicknesses of 0.062”)

Part # <200 200-999 1,000-5,000

CONREVMCX003.062-L $2.72 $2.48 $2.23

CONREVMCX007Male Cable End Crimp (for RG-174, 178)

Part # <200 200-999 1,000-5,000

CONREVMCX007 $3.27 $2.97 $2.67

CONREVMCX007-R178 $3.27 $2.97 $2.67

CONREVMCX005Female Bulkhead Rear Mount Cable End Crimp(for RG-174, 178)

Part # <200 200-999 1,000-5,000

CONREVMCX005 $2.26 $2.06 $1.85

CONREVMCX005-R178 $2.26 $2.06 $1.85

CONREVMCX011Female Cable End Crimp (for RG-174, 178)

Part # <200 200-999 1,000-5,000

CONREVMCX011 $2.45 $2.23 $2.00

CONREVMCX011-178 $2.45 $2.23 $2.00

CONREVMCX012Right-Angle Male Cable End Crimp(for RG-174, 178)

Part # <200 200-999 1,000-5,000

CONREVMCX012 $3.27 $2.97 $2.67

CONREVMCX012-R178 $3.27 $2.97 $2.67CONREVMCX002-SMD-LFemale Right-Angle Surface Mount - Extended

Part # <200 200-999 1,000-5,000

CONREVMCX002-SMD-L $3.18 $2.89 $2.60



MMCX CONNECTORS

CONMMCX001Female PCB Mount

Part # <200 200-999 1,000-5,000

CONMMCX001 $2.38 $2.16 $1.94

CONMMCX002Female Right-Angle PCB Mount

Part # <200 200-999 1,000-5,000

CONMMCX002 $2.74 $2.49 $2.24

CONMMCX001-SMDFemale Surface Mount

Part # <200 200-999 1,000-5,000

CONMMCX001-SMD $2.67 $2.43 $2.19

CONMMCX002-SMDFemale Right-Angle Surface Mount

Part # <200 200-999 1,000-5,000

CONMMCX002-SMD $3.08 $2.80 $2.52

CONMMCX007Male Cable End Crimp (for RG-174, 178)

Part # <200 200-999 1,000-5,000

CONMMCX007 $2.01 $1.83 $1.65

CONMMCX007-R178 $2.01 $1.83 $1.65

CONMMCX011Female Cable End Crimp (for RG-174, 178)

Part # <200 200-999 1,000-5,000

CONMMCX011 $2.54 $2.31 $2.08

CONMMCX011-R178 $2.54 $2.31 $2.08

CONMMCX012Right-Angle Male Cable End Crimp(for RG-174, 178)

Part # <200 200-999 1,000-5,000

CONMMCX012 $2.90 $2.64 $2.38

CONMMCX012-R178 $2.90 $2.64 $2.38



CABLE ASSEMBLIES

Part # <200 200-999 1,000-5,000

CONREVSMA005-C08.5 $5.36 $4.88 $4.39

CONREVSMA005C08.5RP-SMA Female Bulkhead to Unterminated w/ 8.5” RG-174 Cable

Part # <200 200-999 1,000-5,000

CONREVSMA014-C08.5 $5.03 $4.58 $4.12

CONREVSMA014C08.5RP-SMA Female Bulkhead with O-ring toUnterminated w/ 8.5” RG-174 Cable

Part # <200 200-999 1,000-5,000

C58LL-RPSM-2438-NM $12.62 $11.48 $10.33

C58LL-RPSM-2438-NMRP-SMA Male to N Male w/ 8’ Low Loss RG-58 CableMatched to Antenna Factor Yagi antennas

Part # <200 200-999 1,000-5,000

C58LL-SMAM-2438-NM $12.17 $11.06 $9.96

C58LL-SMAM-2438-NMSMA Male to N Male w/ 8’ Low Loss RG-58 CableMatched to Antenna Factor Yagi antennas

Part # <200 200-999 1,000-5,000

CSA-SMAM-216-RSFB $7.92 $7.20 $6.48

CSA-SMAM-216-RSFBSMA Male to RP-SMA Female Bulkhead Mountw/ 216mm (8.5”) of RG-174 cable

Part # <200 200-999 1,000-5,000

CSA-RPSM-216-RSFB $7.63 $6.94 $6.24

Part # <200 200-999 1,000-5,000

CSA-RPSM-216-SAFB $8.00 $7.28 $6.55

Part # <200 200-999 1,000-5,000

CSA-SMAM-216-SAFB $8.00 $7.28 $6.55

CSA-SMAM-216-SAFBSMA Male to SMA Female Bulkhead w/ 216mm (8.5”) of RG-174 cable

CSA-RPSM-216-RSFBRP-SMA Male to RP-SMA Female Bulkhead Mountw/ 216mm (8.5”) of RG-174 cable

CSA-RPSM-216-SAFBRP-SMA Male to SMA Female Bulkhead Mountw/ 216mm (8.5”) of RG-174 cable



SPECIALTY PRODUCTS

This battery holder accommodates 20mm coin cell batteries. This low-cost SMD holder provides a low profile while maintaining asecure hold on the battery. Ideal for keyfobs, remote controls, and other small handheld devices.


200-999 $0.20

1,000-4,999 $0.17

5,000+ CallPart # BAT-HLD-001

Battery Holder

Custom Cable AssembliesConnector City can produce cable assemblies for volume OEM customers. Specify theterminations, cable length, and cable type and Connector City can deliver a high-qualityassembly for a low cost. See our online assembly form at www.connectorcity.com.

The ADP-SMAM-RPSF converts an RP-SMA female connector to SMA male. This is suitable for interfacing Antenna Factorconnectorized antennas or RP-SMA terminated cables to standard test equipment. The ADP-RPSM-SMAF converts an RP-SMAmale connector to SMA female. This is suitable for connecting products using RP-SMA connectors for Antenna Factor antennasto standard test equipment.

RP-SMA to SMA Adaptor

Quantity ADP-SMAM-RPSF ADP-RPSM-SMAF<200 $4.96 $5.12

200-999 $4.51 $4.66

1,000-4,999 $4.06 $4.19

5,000+ Call Call

Part # Price

CTK-58-01 $119

CTK-174-02 $124

These high-quality crimping sets are ideal for low-volume connector assembly. All kits include crimp frame, cable cutter, and stripper in acustom padded hard case. Model CTK-58-01 comes with a die insert for RG-58/59/62. Model CTK-174-02 comes with two (2) die inserts:one for RG-174/179, and one for RG-58/59/62.

Crimp Kits




ADDITIONAL SERVICESLinx works to simplify any step in the RF implementation process that may cause a customer delay or frustration. While Linxdoes not participate in the actual design of a customer’s product or perform contract RF design services, Linx does offer a widerange of support services designed to assist a customer in achieving legality and to maximize the performance of ourcomponents. These services include:

FCC Pre-screen ServicesThe most difficult obstacle to overcome when bringing an RF-based product tomarket, aside from the design itself, is the approval process. To ensure a customerthe best opportunity to pass FCC testing, Linx offers unique low-cost pre-compliancetesting services. With this service, a product is screened just as it will be duringactual FCC testing. In addition to this screen, the actual design is evaluated by aLinx engineer to ensure that it is both legal and technically optimized. A pre-screenreport is then generated summarizing our findings and recommendations. Thisreport, along with additional documentation, will further ease your preparations forfinal approval testing.

Antenna Design AssistanceLinx offers a wide variety of standard antenna styles that will meet the needs of most user’s applications.Occasionally, a design will call for a custom antenna to meet physical or cosmetic constraints. Since thedesign of application-specific antennas calls for experience and equipment outside the scope of many ofour customers, Linx offers antenna design services. These services range from assistance in evaluationof a customer’s antenna configuration to actual antenna design. One of our most popular design specialtiesis small printed antennas, which are often incorporated directly on a PCB to reduce cost and eliminate avisible antenna.

Implementation AssistanceLinx does not undertake OEM design projects in most instances; however, our engineershave broad experience in almost every area of design and manufacturing. Linx is pleased tooffer our customers the benefit of that experience as it pertains to the integration of Linx RFproducts into a product design.

EducationAt Linx, we believe that our best customer is an informed customer. That is why ourcomprehensive manuals are supported by an online knowledge base and a growing libraryof informative application notes. Backed by the assistance of experienced support personnel,each customer has an opportunity to learn about our products and the basic principles of RF.

Internet SiteIf you have questions regarding any Linx product and have internet access, makewww.linxtechnologies.com your first stop. Our website is organized in an intuitiveformat to give you the answers you need. Day or night, the Linx website gives youinstant access to the latest information regarding the products and services of Linx.It’s all here: manual and software updates, knowledge base, application notes, FCCinformation, and much more.




TERMS AND CONDITIONS OF SALE1. PAYMENT TERMS Customer shall pay Linx in advance for all evaluation kits and orders for less than 1,000pieces of Product. Customer shall pay all other orders for Product without setoff ordeduction upon receipt of Linx’s invoice, unless prior credit approval has been grantedby Linx. Linx may extend NET 30 terms on approved accounts. Please completeLinx’s credit application for consideration of NET 30 terms. All prices quoted orcharged by Linx shall be F.O.B. Linx’s plant. Prices do not include sales, excise, use,or other taxes measured by the sales price of Product sold. Customer shall pay anyand all such taxes. Interest shall accrue on all past due amounts at the rate of 1.5%per month or the maximum allowed by law, whichever is less.2. QUANTITY DISCOUNTSLinx may, in its discretion, extend quantity pricing discounts to Customers withaccounts in good standing based on the amount of Product purchased in a six-monthperiod with up to four Product release dates. In the event of rescheduling or partialcancellations, Linx will retroactively invoice Customer to reflect the discount attributablefor the actual amount of Product accepted.3. EVALUATION KIT PURCHASE REQUIREMENTLinx requires the Customer to purchase an evaluation kit prior to the sale of individualmodules of Product. This policy ensures that each Customer has the tools necessaryto fairly evaluate our Products and legally use them for Customer’s application.4. CANCELLATIONSCustomer may cancel an order for standard Product at any time prior to shipmentby Linx. If the cancellation affects a quantity discount extended for a blanket order,Customer will be billed retroactively for the difference between the quantity of Productordered and quantity accepted. Cancellation of an order for custom Product at anytime or standard Product after shipment is not permitted.5. CHANGESLinx realizes Customer’s needs change rapidly and will attempt to accommodaterequested changes to Customer’s orders. Additional charges for requested changesmay apply.6. DELIVERYLinx will deliver the Products by placing them with a carrier for delivery to Customer.Delivery dates are estimated only. In no event shall Linx be liable to Customer orany third parties for any damages of any kind, direct or indirect, in the event of delayof delivery.7. INSPECTION AND ACCEPTANCECustomer shall promptly inspect and test all Products upon receipt. Customer shallbe deemed to have accepted all Products unless Customer gives written notice ofdefective or non-conforming Products within 15 days after receipt. Customer’s noticeshall describe the defect or non-conformity of the Products. Repair or replacementof any Products Linx determines to be defective or non-conforming shall be inaccordance with Linx’s Limited Warranty and Exclusions and Customer’s Remediesas provided for below.8. RETURNSAll Product returned to Linx must be accompanied by a valid Return MerchandiseAuthorization Number ("RMA#"), which may be obtained by calling our CustomerService Department at (541) 471-6256. Products not bearing an RMA# will be returnedat Customer’s expense. Customer may return for refund or credit new, unused, non-defective, or conforming Products that were shipped within the prior 120 days subjectto (a) a 15% restocking charge, or (b) no restocking charge when the return isaccompanied by a new order for Product that is at least twice the invoice amount(freight, insurance, and taxes excluded) of the returned Product.9. LIMITED WARRANTY AND EXCLUSIONSLinx warrants that its Products will conform to Linx’s current published specificationsand be free of defects in materials and workmanship for 90 days from the date ofpurchase when used in accordance with the guidelines and parameters specified byLinx’s documentation. Linx does not warrant against defects arising from improperdesign, application, or assembly practices, rework damage, exposure to moisture,impacts, excessive heat or cold, ESD, or overvoltage, or any other condition resultingfrom other than ordinary and appropriate usage.Linx does not warrant the suitability of its Products for any specific application byCustomer. NONE OF LINX’S PRODUCTS IS INTENDED FOR USE IN APPLICATIONSIN WHICH THE SAFETY OF LIFE OR PROPERTY IS AT RISK. Linx does not warrantany of its Products used in any application in which life or property is at risk.10. DISCLAIMER OF OTHER WARRANTIESLINX DISCLAIMS ALL WARRANTIES OF MERCHANTABILITY AND FITNESS FOR APARTICULAR PURPOSE.

11. CUSTOMER’S REMEDIESIn the event warranty service is required, an RMA# must be obtained from Linx priorto return. Linx will carefully assess Customer’s returned Product. If it is found toqualify for warranty status, Linx will, at its election, repair or replace the Productwithout charge (excluding inbound shipping), or refund the original purchase pricepaid.12. LIMITATIONS ON CUSTOMER’S REMEDIESIN NO EVENT SHALL LINX BE LIABLE FOR ANY OF CUSTOMER’S INCIDENTIAL ORCONSEQUENTIAL DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY LOSTPROFITS OR LOST REVENUES, ARISING IN ANY WAY FROM ANY DEFECTIVE ORNON-CONFORMING PRODUCTS OR FOR ANY OTHER BREACH OF CONTRACT BYLINX. The limitations on Linx’s liability is applicable to any and all claims or theoriesof recovery asserted by Customer, including, without limitation, breach of contract,breach of warranty, strict liability, or negligence. Customer assumes all liability(including, without limitation, liability for injury to person or property, economicloss, or business interruption) for all claims, including claims from third parties,arising from the use of the Products.13. LIMITATIONS ON TIME TO BRING ACTIONAny action by Customer against Linx must be commenced by Customer within oneyear after the cause of action has accrued.14. LINX’S REMEDIESUpon default by Customer, Linx shall have all the remedies afforded a seller of goodsat law or in equity, including, without limitation, the right to (a) immediately accelerateall amounts due from Customer, (b) suspend shipment of all Products ordered, and(c) cancel all orders for Products.15. INDEMNITYCustomer will indemnify, defend, protect, and hold harmless Linx from and againstall claims, damages, actions, suits, proceedings, demands, assessments, adjustments,costs, and expenses incurred by Linx as a result of or arising from any Productssold by Linx to Customer.16. FCC CERTIFICATIONLinx designs its Products taking into account compliance with FCC Part 15. HOWEVER,IT IS THE SOLE RESPONSIBILITY OF CUSTOMER TO VERIFY THEAPPROPRIATENESS OF THE PRODUCTS FOR EACH INDIVIDUAL APPLICATIONAND OBTAIN CERTIFICATION OF THE CUSTOMER’S COMPLETED GOODS INTOWHICH THE PRODUCTS ARE INCORPORATED.17. PROPRIETARY INFORMATIONLinx’s Products may contain proprietary, patented, or copyrighted techniques,components, or materials. Under no circumstances shall any Customer have anyright, title, or interest in any of Linx’s proprietary information.18. DELAYS AND FORCE MAJEURELinx shall not be in default for any delay in performance or delivery caused bycircumstances beyond its reasonable control, including, but not limited to, an act ofGod, fires, floods, wars, terror, government actions, accidents, labor troubles, laborshortages, unavailability of materials, unavailability of equipment, or unavailability oftransportation (“Force Majeure Event”). Linx may, without liability to Customer,suspend or cancel its performance upon the occurrence of any Force Majeure Eventwithout liability to Customer.19. COMPLETE AGREEMENTThese Terms and Conditions may be changed only by a written document executedby Linx and Customer. Any order, acknowledgment, or other form of acceptanceissued by Customer that modifies, conflicts with, or contradicts any provision ofthese Terms and Conditions is objected to and rejected by Linx.20. CHOICE OF LAWThe parties’ agreement shall be governed by the laws of the State of Oregon. Forinternational sales, the laws of the State of Oregon, and not the United NationsConvention on Contracts for the International Sales of Goods, shall apply.21. ARBITRATION AND ATTORNEY FEESAny and all claims arising under these Terms and Conditions, or arising in any wayfrom the sale or use of the Products, or otherwise, shall be resolved by binding,mandatory arbitration under the authority of the Arbitration Service of Portland beforea panel of three arbitrators. The arbitration shall be conducted in Portland, OR. Theprevailing party in the arbitration shall be entitled to an award of attorney fees andall other costs of arbitration against the non-prevailing party.

price list / order termsedge.rit.edu/content/p10010/public/pdf/linxtech_rf_pricelist.pdf · the...

Documents