price list 2016 -...
TRANSCRIPT
(all prices in Euro not included VAT /// all prices subject to change)valid from 01.2016
PRICE LIST 2016
EXPERTS IN FALL PROTECTION
Transport / Services / Presentation models / Gifts 54-55
Dimensions / Hole spacings / Drill patterns 56-57
Product OverviewAIO-Horizontal lifeline systems 08-17
AIO-ENDS 09
AIO-TYP 09
AIO-GLEIT 09
AIO-EDLE 10-11
AIO-SZH 11
AIO-EB 11-12
AIO-SEIL 12
AIO-STA 12-14
AIO-STX 15
AIO-SYST 15
AIO-SYST-SZH 16
AIO-FALZ 16
AIO-SAND 17
AIO-VARIO 17
KIT-Horizontal lifeline systems 18-19
LIFELINE–KIT 19
TEMP-Temporary lifeline systems 20-21
TEMP 21
VERT-Vertical lifeline systems 22-23
VERT 23
TAURUS-Rail systems 24-27
TAURUS 25-27
BARRIER-Guardrail systems / Side protection 28-31
BARRIER 28-31
LIGHT-Skylight protection systems 32-33
LIGHT 33
LIGHT-V2 33
LWP-LIGHT 33
MOBI 33
SDH / DAS-Safety hooks 34-35
SDH 35
DAS 35
FSG / FAS-Window safety railings 36-37
FSG 37
FAS 37
EAP-Single anchor points 38-45
EAP-STABIL 38-39
EAP-STX 39
EAP-SLING 39
EAP-POINT 39-40
EAP-QUAD 40-42
EAP-SPAR 42-43
EAP-LOCK 43
EAP-FALZ 43
EAP-SYST 44
EAP-SAND 45
EAP-VARIO 45
EAP-INDUSTRY 45
PSA-Personal protective equipments 46-47
STRING 46
PSA-SET 46
BRAKE 47
SHARK 47
KARI 47
TAPE 47
HSG 47
PSA-SCHRANK 47
Product accessories / Fastening accessories 48-49
Installation tools / Installation accessories 51
Fastening sets 52-53
Transport / Services / Presentation models / Gifts
QR-Codeto Product Finderwww.innotech.at
AIO-Horizontal lifeline systems
KIT-Horizontal lifeline systems
TEMP-Temporary lifeline systems
VERT-Vertical lifeline systems
TAURUS-Rail systems
BARRIER-Guardrail systems / Side protection
LIGHT-Skylight protection systems
SDH / DAS-Safety hooks
FSG / FAS-Window safety railings
EAP-Single anchor points
PSA-Personal protective equipments
Product accessories / Fastening accessories
Installation tools / Installation accessories
Fastening sets
Dimensions / Hole spacings / Drill patterns
4
AIO-Horizontal lifeline systems
EXPERTS IN FALL PROTECTION
INNOTECH‘s AIO Lifeline systems guarantee maximum range of mobility to rooftop workers. They can walk along either side of the system without decoupling and recoupling themselves. Flexible intermediate cable brackets and curve elements are perfectly adaptable to all sorts of roof and façade structures. The systems are equipped with the latest in pretension and shock absorption elements, in order to keep the fall stresses as low as possible. INNOTECH products are also statically and dynamically tested on the necessary substructures to fulfil the European standard EN 795:2015.
Certif ied to the latest technological standards:
EN 795:2012 TYP C und E
CEN/TS 16415:2013
AIO ALL-IN-ONE-Horizontal lifeline systems
BARRIER by INNOTECH® provides additional safety for persons who spend time on flat roofs. The multifaceted and customizable system can be adapted to a wide variety of roof types and preserves the aesthetic of the building. The VARIO system is anchored with a superimposed load, making it applicable without puncturing the rooftop.
Certif ied to the latest technological standards:
EN 13374:2013, EN ISO 14122-3:2014, DIN 14094-2:2007
NF E 85-015:2008
NEW! OPTIMISED SYSTEM! longer spacing (up to 2.2 m)
Angle adjustment (90°, 75°)
simple and fast installation with snap-lock mechanisms
BARRIER Guardrail systems /Side protection
TAURUS Rail systems
TAURUS, the aluminium rail system for use on all substructures, features variable rail connections and end units. These are easy to install and are adaptable to any surroundings thanks to curve and arch elements. Users of this system can move freely along the entire length of the rail and can work with the greatest range of motion. An automatic delaying unit, „Speed Control“, registers fall speeds. In case of a fall, the „Allround rail slider“ immediately stops movements in all directions.
Certified to the latest technological standards:
Horizontal-System: EN 795:2012 TYP D, CEN/TS 16415:2013
Vertical-System: EN 353-1:2002, CNB/P/11.073
CEN/TS 16415:2013
Allround-System: EN 795:2012 TYP D, EN 353-1:2002
CNB/P/11.073, CEN/TS 16415:2013
ALL PRICES IN EURO (VAT EXCL.)
© Vertical Work
5
AIO-Horizontal lifeline systems AIO ALL-IN-ONE-Horizontal lifeline systems
VERT Lifeline systems
EAP Single anchor points
Properly installed INNOTECH® Single anchor points provide safety at windows and on flat and angled roofs in cases where integrating a lifeline system cannot reasonably be implemented. A wide range of single anchor points are available to fit all sorts of roof structures. The EAP single anchor points can be installed on all kinds of substructures.
Certif ied to the latest technological standards:
EN 795:2012 TYP A
CEN/TS 16415:2013 TYP A
DIBt – general construction clearance
N°: Z-14.9-732
The VERTICAL lifeline system from INNOTECH® is used for affixing employees with personal protective equipment for secure ascent and descent of ladders. High ease-of-use is guaranteed through preassembled components that ensure simple and quick installation. The innovative safety function of the new slider excludes a wrong application of the system. Directly connected to the slider is a special shock absorber that offers best shock absorption. All these advantages lead to an absolute quick and easy ascent /descent – by using an intermediate bracket and a system that now can be completely passed over.
Certif ied to the latest technological standards:
EN 353-1:2014
BARRIER Guardrail systems /Side protection LIGHT Skylight protection systems
INNOTECH® develops solutions for many different types of skylights, in order to protect workers from falling through whether the skylight is open or closed. The products, featuring an innovative installation system, stand out thanks to their ease of setup and refitting. They also provide optimal light and smoke permeability. Their force absorption is among the best due to their innovative shock absorption system.
Certif ied to the latest technological standards:
statically and dynamically tested according to
EN 1263-1:2002
TAURUS Rail systems
ALL PRICES IN EURO (VAT EXCL.)
APPROVAL:
Z-14.9-732
✔
NEW!
6
AIO-Horizontal lifeline systems
EXPERTS IN FALL PROTECTION
SDH / DAS Safety roof hooks
TEMP, the temporary lifeline system from INNOTECH®, can be installed quickly and easily and is therefore especially practical for short-term needs on construction sites or in industrial settings (steel, façades, warehouse and bridge construction, etc.)A handy intermediate bracket and a cable drum including a braking mechanism ensure maximum flexibility for temporary use.
Certif ied to the latest technological standards:
EN 795:2012 Typ B and C
INNOTECH’s® Safety roof hooks only require a mini-mal wood layer and therefore adapt perfectly to the roof‘s particularities.SDH, which is available in various colors, has a gentle effect on the building‘s appearance and guarantees perfect safety - it passed the standards test in all stress directions, including along the „y“ axis!
Certif ied to the latest technological standards:
EN 517:2006 Typ B, stress-tested in all directions
TEMP Temporary lifeline systems
The flexible lifeline system LIFELINE-KIT, packaged in a handy bucket, is wonderfully suited for quick and simple setup at myriad support structures. Approved for 4 persons (including 1 person for administering first aid), it is ideal for use on construction sites of all kinds (steel, façades, warehouse and bridge construction, etc.
Certif ied to the latest technological standards:
EN 795:2012 Typ C
LIFELINE-KIT Lifeline systems
ALL PRICES IN EURO (VAT EXCL.)
7
AIO-Horizontal lifeline systems
QR-Codeto Product Finderwww.innotech.at
SDH / DAS Safety roof hooks
PSA personal protective equipment
Selecting the personal protective equipment from the INNOTECH® product portfolio provides the utmost safety for work on roofs, scaffoldings, ladders, façades, etc. High-quality systems can be easily combined to suit individual needs and offer a high degree of functionality, durability and user-friendliness.
Certif ied to the latest technological standards:
EN 361, EN 358, EN 354
FSG / FAS Window safety railings
INNOTECH‘s® telescoping window safety railing FSG is easy to adjust to different widths, making it universally applicable.This provides optimal safety to individuals who need to perform maintenance or cleaning duties at open windows. After use, the FSG can be removed quickly and easily. When stored it can take on a compact shape!
Certif ied to the latest technological standards:
EN 12811-1, EN13374, EN HD 1000,
tested with 125 kg ÖNORM B 4007
ALL PRICES IN EURO (VAT EXCL.)
8
AIO-Horizontal lifeline systems
EXPERTS IN FALL PROTECTION
AIO-system variants overview
ALL PRICES IN EURO (VAT EXCL.)
AIO-EB-12AIO-ENDS-10
AIO-STA-10BEF-401-10AIO-SZH-10
AIO-GLEIT-10
AIO-STA-12BEF-107AIO-EDLE-19
AIO-STA-10BEF-201AIO-EDLE-11
AIO-EDLE-12
AIO-SZH-11
AIO-EB-11AIO-ENDS-10
AIO-STA-11BEF-203 AIO-EB-10 AIO-ENDS-10
AIO-STA-10 BEF-206AIO-EB-10 AIO-ENDS-10
AIO-STA-16BEF-403AIO-SZH-10
AIO-SYST-20AIO-EDLE-10
AIO-VARIO-40AIO-EB-10AIO-ENDS-10
AIO-VARIO-20AIO-SZH-10
AIO-SAND-12AIO-SZH-10
AIO-SYST-04-SZHAIO-SZH-10
AIO-SYST-01AIO-SZH-10
AIO-STA-10 BEF-303AIO-EB-10 AIO-ENDS-10
AIO-STA-12BEF-404 BEF-404-1AIO-SZH-10
AIO-GLEIT-10
AIO-STX-10AIO-EB-142 x AIO-ENDS-10
9
AIO-Horizontal lifeline systems
ATTENTION: Read the latest INNOTECH instructions for installation and usage of the products!
AIO-ENDSIllustration Catalog N° Description
AIO-ENDS-10 END LOCK SET for horizontal lifeline sytem (EN 795 C)Material: stainless steel (AISI 304), aluminium (anodised)
Complete set for one cable span, constant spr ing pre-tension and indicator clamp!
Rating plate not included!
AIO-TYPAIO-TYP-20-DE AIO-TYP-20-DKAIO-TYP-20-ENAIO-TYP-20-ESAIO-TYP-20-FRAIO-TYP-20-ITAIO-TYP-20-NLAIO-TYP-20-PLAIO-TYP-20-RO AIO-TYP-20-SKAIO-TYP-20-SV
RATING PLATE (EN 795 C)Material: stainless steel (AISI 304), plast ic
for ident i f y ing a hor izontal l i fel ine system
Various fastening opt ions!
Revision plaque included!
DE = GERMAN / DK = DANISH / EN = ENGLISH / ES = SPANISHFR = FRENCH / IT = ITALIAN / NL = DUTCH / PL = POLISH / RO = ROMANIAN SK = SLOVAKIAN / SV = SWEDISH
AIO-TYP-21-DE AIO-TYP-21-DKAIO-TYP-21-ENAIO-TYP-21-ESAIO-TYP-21-FRAIO-TYP-21-ITAIO-TYP-21-NLAIO-TYP-21-PLAIO-TYP-21-RO AIO-TYP-21-SKAIO-TYP-21-SV
RATING PLATE (EN 795 C-E)Material: stainless steel (AISI 304), plast ic
for ident i f y ing a sel f-suppor t ing hor izontal l i fel ine system
Various fastening opt ions!
Revision plaque included!
DE = GERMAN / DK = DANISH / EN = ENGLISH / ES = SPANISHFR = FRENCH / IT = ITALIAN / NL = DUTCH / PL = POLISH / RO = ROMANIAN SK = SLOVAKIAN / SV = SWEDISH
AIO-GLEITAIO-GLEIT-10-A4 FREE TO MOVE SLIDER,
detachable, curve compatible (EN 795 B)Material: stainless steel (AISI 316)
can be at tached and detached at any point on the cable in the hor izontal l i fel ine systemfree to move over al l pass-through elements (intermediate cable brackets and curves)
1 pce. of triple-lock carabiner (EN 362) included!
AIO-GLEIT-11 FREE TO MOVE ANCHOR POINT SLIDER, not detachable, not curve compatible, (EN 795 C)Material: stainless steel (AISI 304)
free to move the pass-through elements in overhead l i fel ine systems (intermediate cable brackets)
1 pce. of triple-lock carabiner (EN 362) included!
AIO-GLEIT-12 FREE TO MOVE ANCHOR POINT SLIDER FOR CURVES, not detachable, curve compatible, (EN 795 C)Material: stainless steel (AISI 304)
free to move the pass-through elements in overhead l i fel ine systems (intermediate cable brackets and curves)
1 pce. of triple-lock carabiner (EN 362) and gap control gauge included!
AIO-GLEIT-13-A4 FREE TO MOVE ANCHOR POINT SLIDER, not detachable, curve compatible, (EN 795 C)Material: stainless steel (AISI 316)
free to move the pass-through elements (intermediate cable brackets and curves)
1 pce. of triple-lock carabiner (EN 362) included!
ALL PRICES IN EURO (VAT EXCL.)
Priceper piece/PU
359.00
30.00
30.00
364.00
364.00
525.00
269.00
10
AIO-Horizontal lifeline systems
EXPERTS IN FALL PROTECTION
Accessories for AIO-EDLE-10
AIO-EDLE-10- ROHRBOGEN-80
AIO-EDLE-10- ROHRBOGEN-105
AIO-EDLE-10- ROHRBOGEN-120
PIPE BEND, can be passed over (EN 795 C)Applicat ion: AIO-EDLE-10Material: stainless steel (AISI 316)
for set t ing up a 80°, 105° or 120° corner setPass-over capabil i t y : only outside!
AIO-EDLE-10 not included!
AIO-EDLEIllustration Catalog N° Description
AIO-EDLE-10 STANDARD CORNER PASS-THROUGH ELEMENT, 90°, can be passed over (EN 795 C)Mountable on: AIO-STA, AIO-STX, AIO-FALZ, AIO-SAND, AIO-VARIO, AIO-SYST, etc. Pass-over capabil i t y : inside and outside corners or overhead systemsConnect ion: thread M16Material: stainless steel (AISI 304)
for set t ing up a 90° corner set
Variably adjustable cable angle thanks to bent base plate!
AIO-EDLE-11 STANDARD-CURVED CORNER PASS-THROUGH ELEMENT, 135°, can be passed over (EN 795 C)Mountable on: AIO-STA, AIO-STX, AIO-FALZ, AIO-SAND, AIO-VARIO, AIO-SYST, etc. Pass-over capabil i t y : inside cornersConnect ion: thread M16 Material: stainless steel (AISI 304)
for set t ing up a 135° corner set
AIO-EDLE-12 FACADE CURVED CORNER PASS-THROUGH ELEMENT, 90°, can be passed over (EN 795 C)Mountable on: facadePass-over capabil i t y : inside and outside corners or overhead systemsConnect ion: fastening boreholes Ø 17 mmThrough boreholes: 134 mmEngagement posi t ions: 0°, 45°, 90°, 135°, 180°Material: stainless steel (AISI 304)
for set t ing up a 90° corner set
AIO-EDLE-13 FACADE CURVED CORNER PASS-THROUGH ELEMENT, 90°, can be passed over (EN 795 C)Mountable on: steel construct ionPass-over capabil i t y : inside and outside corners or overhead systemsConnect ion: fastening boreholes Ø 17 mmEngagement posi t ions: 0°, 45°, 90°, 135°, 180°Material: stainless steel (AISI 304)
for set t ing up a 90° corner set
Restr icted use as outside corners!
AIO-EDLE-14 STANDARD-CURVED CORNER PASS-THROUGH ELEMENT, variable, cannot be passed over (EN 795 C)Mountable on: AIO-STA, AIO-STX, AIO-FALZ, AIO-SAND, AIO-VARIO, AIO-SYST, etc. Pass-over capabil i t y : inside cornersConnect ion: thread M16 Material: stainless steel (AISI 304), plast ic
for set t ing up a var iable corner set
AIO-EDLE-16-1
AIO-EDLE-16-1,5
AIO-EDLE-16-3
SPECIAL CURVED CORNER PASS-THROUGH ELEMENT, EXTENSION TUBE, can be passed over (EN 795 C)Pass-over capabil i t y : special cornersLength: 1000 / 1500 / 3000 mmCurve corner: 0°Material: stainless steel (AISI 316)
Suitable bending dev ice or f lar ing tool required for connect ing to AIO-EDLE-12 / -13 / -17 / -18! (page 51)
AIO-EDLE-16-90 SPECIAL CURVED CORNER PASS-THROUGH ELEMENT, EXTENSION TUBE, 90° can be passed over (EN 795 C)Pass-over capabil i t y : special cornersLength: 1000 mmCurve corner: 90°Material: stainless steel (AISI 316)
Suitable bending dev ice or f lar ing tool required for connect ing to AIO-EDLE-12 / -13 / -17 / -18! (page 51)
ALL PRICES IN EURO (VAT EXCL.)
Priceper piece/PU
209.00
119.00
153.00
153.00
114.00
26.00
45.00
65.00
32.00
45.00
45.00
45.00
11
AIO-Horizontal lifeline systems
ATTENTION: Read the latest INNOTECH instructions for installation and usage of the products!
AIO-EDLEIllustration Catalog N° Description
AIO-EDLE-17 RETAINING BRACKET, offset on both sides, can be passed over (EN 795 C)Mountable on: AIO-STA, AIO-STX, AIO-FALZ, AIO-SAND, AIO-VARIO, AIO-SYST, etc. Pass-over capabil i t y : inside and outside corners or overhead systemsConnect ion: thread M16Engagement posi t ions: 0°, 45°, 90°, 135°, 180°Material: stainless steel (AISI 304)
Only for use with 2 pcs. of AIO-EDLE-16 and AIO-EDLE-18!
AIO-EDLE-18 RETAINING BRACKET, offset on one side, can be passed over (EN 795 C)Mountable on: AIO-STA, AIO-STX, AIO-FALZ, AIO-SAND, AIO-VARIO, AIO-SYST, etc. Pass-over capabil i t y : inside and outside corners or overhead systemsConnect ion: thread M16Engagement posi t ions: 0°, 45°, 90°, 135°, 180°Material: stainless steel (AISI 304)
Only for use with 1 pce. of AIO-EDLE-16!
AIO-EDLE-19 RETAINING BRACKET, variable up to 135°, can be passed over (EN 795 C)Mountable on: AIO-STA, AIO-STX, AIO-FALZ, AIO-SAND, AIO-VARIO, AIO-SYST, etc. Pass-over capabil i t y : inside and outside corners or overhead systemsConnect ion: thread M16Engagement posi t ions: 0°, 45°, 90°, 135°, 180°Material: stainless steel (AISI 304)
Angular displacement possible from 0°, 180° up to 135°!
Suitable bending dev ice or f lar ing tool required! (page 51)
(exact dimensions page 57)
AIO-EBAIO-EB-10 STANDARD-END LOCK FASTENING, short (EN 795 C)
Mountable on: AIO-STA, AIO-STX, AIO-FALZ, AIO-SAND, AIO-VARIO, AIO-SYST, etc. Connect ion: thread M16 Material: stainless steel (AISI 304)
for fastening the l i fel ine system with an end lock (AIO-ENDS-10)
AIO-EB-11 STANDARD- END LOCK FASTENING, facade (EN 795 C)Mountable on: facadeConnect ion: fastening boreholes Ø 17 mmThrough boreholes: 134 mmMaterial: stainless steel (AISI 304)
for fastening the l i fel ine system with an end lock (AIO-ENDS-10)
AIO-EB-12 STANDARD- END LOCK FASTENING, concrete wall (EN 795 C)Mountable on: concrete wall, facadesConnect ion: Ø 13 mm Material: stainless steel (AISI 304)
for fastening the l i fel ine system with an end lock (AIO-ENDS-10) 90° to the wall
Heav y duty anchors (BEF-104-A4) must not be used on weathered facades or insulat ion!(use 3 pcs. of adhesive anchorbil ts M12)
AIO-SZHAIO-SZH-10 STANDARD-INTERMEDIATE BRACKET, can be passed over (EN 795 C)
Mountable on: AIO-STA, AIO-STX, AIO-FALZ, AIO-SAND, AIO-VARIO, AIO-SYST, etc. Connect ion: thread M16Funct ion range: 220°Material: stainless steel (AISI 304)
For use on both sides without detaching the sl ider!
AIO-SZH-11 FACADES-INTERMEDIATE BRACKET, can be passed over (EN 795 C)Mountable on: facades Connect ion: fastening boreholes Ø 17 mmThrough boreholes: 134 mmFunct ion range: 220°Material: stainless steel (AISI 304)
ALL PRICES IN EURO (VAT EXCL.)
Priceper piece/PU
62.00
61.00
64.00
23.00
50.00
114.00
49.00
51.00
12
AIO-Horizontal lifeline systems
EXPERTS IN FALL PROTECTION
AIO-STA-10AIO-STA-10-300AIO-STA-10-400AIO-STA-10-500AIO-STA-10-600
AIO-STA-10-500-A4AIO-STA-10-600-A4
STANDARD POST in AIO-lifeline system (EN 795 C)Mountable on: concrete, wood, trapezoidal suppor t ing sheet, steel construct ion, etc.Post height: 300 / 400 / 500 / 600 mm, Ø 48 mmBase plate dimensions: 150 x 150 x 8 mmMaterial: galvanised steel / stainless steel (AISI 316)
Thermal insulat ion cap and sealing sleeve see Product accessories (page 48)!
Fastening sets not included! (see following page)Special lengths upon request!
AIO-SEILAIO-SEIL-30 STAINLESS STEEL CABLE (EN 795 C)
Dimensions: Ø 8 mm (7 x 7)Break ing load: 37 kNMaterial: stainless steel (AISI 316)
tested for INNOTECH-l i fel ine systems
AIO-EBIllustration Catalog N° Description
AIO-EB-13 CORNER-END LOCK FASTENING, 90° (EN 795 C)Mountable on: AIO-STA, AIO-STX, AIO-FALZ, AIO-SAND, AIO-VARIO, AIO-SYST, etc. Connect ion: thread M16Material: stainless steel (AISI 304)
for fastening two l i fel ine systems (AIO-ENDS-10) at an angle of 90°
AIO-EB-14 CORNER-END LOCK FASTENING, 30° – 180° (EN 795 C)Mountable on: AIO-STA, AIO-STX, AIO-FALZ, AIO-SAND, AIO-VARIO, AIO-SYST, etc. Connect ion: thread M16Material: stainless steel (AISI 304)
for fastening two l i fel ine systems (AIO-ENDS-10) at an angle of 30° – 180°
AIO-EB-15 STANDARD- END LOCK FASTENING, long (EN 795 C)Mountable on: AIO-STA, AIO-STX, AIO-FALZ, AIO-SAND, AIO-VARIO, AIO-SYST, etc. Connect ion: thread M16Material: stainless steel (AISI 304)
for fastening the l i fel ine system with an end lock (AIO-ENDS-10)
AIO-STA-11AIO-STA-11-340AIO-STA-11-470
STEEP ROOF POST in AIO-lifeline system (EN 795 C)Mountable on: concrete, wood, trapezoidal suppor t ing sheet, steel construct ion, etc.Post height: 340 / 470 mm, Ø 48 mmBase plate dimensions: 150 x 150 x 8 mmMaterial: galvanised steel
Thermal insulat ion cap and sealing sleeve see Product accessories (page 48)!
Fastening sets not included! (see following page)Special lengths upon request!
ALL PRICES IN EURO (VAT EXCL.)
98.00
210.00
7.60(per meter)
AIO-EBPrice
per piece/PU
112.00
75.00
36.00
103.00
13
AIO-Horizontal lifeline systems
ATTENTION: Read the latest INNOTECH instructions for installation and usage of the products!
Fastening sets for AIO-STA-10 und AIO-STA-11
Illustration Catalog Nr. Description
BEF-104-A4 CONCRETE (min. C20/25) – cracked and uncrackedMaterial: stainless steel (AISI 316)Package: 4 x anchor bol ts FISCHER FAZ II 12/10 A4
Dril l depth min. 105 mm (Ø 12 mm)!
BEF-201 WOOD – TIMBER RAFTER (min. 16 x 16 cm)Material: galvanised steel Package: 8 x fastening bol ts (8 x 140 mm)
8 x washer (coni form)
Min. penetrat ion into stat ic load-bearing construct ion: 100 mm!
BEF-203 WOOD –STEEP ROOF, TIMBER RAFTER (min. 8 x 10 cm)Material: galvanised steelPackage: 1 x steep roof fastening bar (1250 x 195 x 35 mm)
8 x fastening bol ts (8 x 220 mm) (includes fastening accessories for post instal lat ion)
Min. penetrat ion into stat ic load-bearing construct ion: 90 mm!
BEF-206 WOOD – RIDGE INSTALLATION, TIMBER RAFTER (min. 8 x 8 cm)Material: galvanised steel
Wood cross-sect ion of load-bearing wood min. 80 x 80 mm, strength of panell ing 20 mm!Min. penetrat ion into stat ic load-bearing construct ion: 80 mm!For the f ixat ion 12 pcs. fastening bolts are required.
Fastening material not included! (page 49)
BEF-303 TRAPEZOIDAL SUPPORTING SHEET, FASTENING FRAMEMaterial: galvanised steelDimensions: 840 x 840 x 40 mmSheet metal thickness: min. 0.6 mm
for opt imal load distr ibut ion on trapezoidal suppor t ing sheet, widely var ied useabil i t y
Fastening set (BEF-303-1 / BEF-303-3) not included!
BEF-303-1 TRAPEZOIDAL SUPPORTING SHEET, QUICK FASTENING BRACKETMaterial: galvanised steelPackage: 4 x fastening bracket
16 x bore fastenerSheet metal thickness: min. 0.6 mmRaised bead width: min. 60 mm(exact dimensions page 57)
BEF-303-3 TRAPEZOIDAL SUPPORTING SHEET, SPECIAL TOGGLE FASTENERMaterial: galvanised steelPackage: 4 x special toggle fastenerSheet metal thickness: min. 0.6 mmRaised bead width: max. 60 mmFree space under raised bead min. 115 mm, bore diameter Ø 28 mm(exact dimensions page 57)
BEF-401-10 STEEL CONSTRUCTION, COUNTER PLATE (150 x 150 x 8 mm)Material: galvanised steelMax. width of steel construct ion: 105 mm
Fastening accessories not included! (page 49)
BEF-403 STEEL CONSTRUCTION, COUNTER PLATE (140 x 20 x 10 mm)Material: galvanised steelPackaging unit : 2 piecesMax. width of steel construct ion: 105 mm
Fastening accessories not included! (page 49)
BEF-412 STEEL CONSTRUCTION, CLAMPING CONSOLEMaterial: galvanised steelFlange thickness: 10 up to 40 mmWidth of steel beam: 125 – 415 mm
ALL PRICES IN EURO (VAT EXCL.)
Priceper piece/PU
29.00
14.00
129.00
99.00
150.00
35.00
75.00
19.00
20.00
349.00
NEW!
14
AIO-Horizontal lifeline systems
EXPERTS IN FALL PROTECTION
AIO-STA-12Illustration Catalog N° Description
AIO-STA-12-300AIO-STA-12-400AIO-STA-12-500AIO-STA-12-600
AIO-STA-12-700AIO-STA-12-800
STANDARD POST (base plate 300 x 300 mm) in AIO-lifeline system (EN 795 C)Mountable on: concrete, hollow concrete slab, trapezoidal supporting sheet, steel construction, etc.Post height: 300 / 400 / 500 / 600 / 700 / 800 mm, Ø 48 mmBase plate dimensions: 300 x 300 x 8 mmMaterial: galvanised steel
Thermal insulat ion cap and sealing sleeve see Product accessories (page 48)!Fastening sets not included! (see below) Special lengths upon request!
AIO-STA-16AIO-STA-16-200AIO-STA-16-500
STANDARD POST, lateral base plate, in AIO-lifeline system (EN 795 C)Mountable on: concrete (anchoring depth at least 100 mm), steel construct ion, etc.Post height: 200 / 500 mm, Ø 48 mmBase plate dimensions: 150 x 192 x 8 mmMaterial: galvanised steel
(use 4 pcs. of adhesive anchor bol ts M12)Fastening sets not included! (see below)Special lengths upon request!
Fastening sets for AIO-STA-16
BEF-401-10 STEEL CONSTRUCTION, COUNTER PLATE (150 x 150 x 8 mm)Material: galvanised steelMax. width of steel construct ion: 105 mmFastening accessories not included! (page 49)
BEF-403 STEEL CONSTRUCTION, COUNTER PLATE (140 x 20 x 10 mm)Material: galvanised steelPackaging unit : 2 piecesMax. width of steel construct ion: 105 mmFastening accessories not included! (page 49)
Fastening sets for AIO-STA-12
BEF-104-A4 CONCRETE (min. C20/25) – cracked and uncrackedMaterial: stainless steel (AISI 316)Package: 4 x anchor bol ts FISCHER FAZ II 12/10 A4
Dril l depth min. 105 mm (Ø 12 mm)!
BEF-107 HOLLOW CONCRETE SLAB (min. C50/60, B4)Material: galvanised steelPackage: 8 x hollow core anchor FISCHER FHY-M10 x 52
8 x hex bol t M10 x 60 (DIN 933) / 8 x washer (M10)
hollow slab cross-sect ion (concrete thickness) min. 30 mm
BEF-303 TRAPEZOIDAL SUPPORTING SHEET, FASTENING FRAMEMaterial: galvanised steelDimensions: 840 x 840 x 40 mmSheet metal thickness: min. 0.6 mmfor opt imal load distr ibut ion on trapezoidal suppor t ing sheet, widely var ied useabil i t yFastening set (BEF-303-1 / BEF-303-3) not included!
BEF-303-1 TRAPEZOIDAL SUPPORTING SHEET, QUICK FASTENING BRACKETMaterial: galvanised steelPackage: 4 x fastening bracket / 16 x bore fastenerSheet metal thickness: min. 0.6 mmRaised bead width: min. 60 mm(exact dimensions page 57)
BEF-303-3 TRAPEZOIDAL SUPPORTING SHEET, SPECIAL TOGGLE FASTENERMaterial: galvanised steelPackage: 4 x special toggle fastenerSheet metal thickness: min. 0.6 mmRaised bead width: max. 60 mmFree space under raised bead min. 115 mm, bore diameter Ø 28 mm(exact dimensions page 57)
BEF-401-12 STEEL CONSTRUCTION, COUNTER PLATE (300 x 300 x 8 mm)Material: galvanised steelMax. width of steel construct ion: 185 mm or 255 mmFastening accessories not included! (page 49)
BEF-404 TRAPEZOIDAL SUPPORTING SHEET, SCREW FASTENERMaterial: galvanised steelPackage: 4 x counter plate incl. screw mater ial, sealing washerSheet metal thickness: min. 0.7 mmOnly for l imited use in the AIO- l i fel ine system (BEF-404-1)!
BEF-404-1 TRAPEZOIDAL SUPPORTING SHEET, STABILISATION BARMaterial: galvanised steel Package: 2 x suppor t bars / 4 x bore fastener / 4 x centr ing washerSheet metal thickness: min. 0.7 mmOnly in combinat ion of BEF-404 to stabil ise corner - and end points!
ALL PRICES IN EURO (VAT EXCL.)
Priceper piece/PU
139.00
155.00
29.00
49.00
150.00
35.00
75.00
39.00
75.00
59.00
129.00
19.00
20.00
NEW!
15
AIO-Horizontal lifeline systems
ATTENTION: Read the latest INNOTECH instructions for installation and usage of the products!
AIO-STX-10 Illustration Catalog N° Description
AIO-STX-10-100-250 QUICK INSTALLATION POST in AIO-lifeline system (EN 795 C)Mountable on: trapezoidal suppor t ing sheet
Material: steelMater ial thickness (without coat ing): min. 0.75 mmInsulat ion thickness: 100 – 250 mm
Post height: over aqui fer c. 200 mmMaterial: coated steel (RAL 9005), aluminium, stainless steel (AISI 304)
Af ter instal lat ion the post has to be sealed in professionally!
Fastening accessories (4 pcs. bore fastener per post) and installation tools not included! (page 51)
Accessories for STX-10
BBF-4,8-160-0-VZ
BBF-4,8-200-0-VZ
BBF-4,8-240-0-VZ
BBF-4,8-280-0-VZ
bore fastener, hexagonal A/F8, Ø 4.8 x 160, IR2, galvanised for insulat ion thickness of 100 – 140 mm, galvanisedbore fastener, hexagonal A/F8, Ø 4.8 x 200, IR2, galvanised for insulat ion thickness of 135 – 180 mm, galvanisedbore fastener, hexagonal A/F8, Ø 4.8 x 240, IR2, galvanised for insulat ion thickness of 175 – 220 mm, galvanisedbore fastener, hexagonal A/F8, Ø 4.8 x 280, IR2, galvanised for insulat ion thickness of 215 – 250 mm, galvanised
AIO-SYSTAIO-SYST-01-410-610 END-, CORNER POINT in AIO-lifeline system
for standing seam roofs (EN 795 C)Mountable on: (Double-) standing seam roofs
Material (Mater ial thickness): steel (min. 0.5 mm), aluminium (min. 0.7 mm)Width of prof i le: 410 – 610 mm
Material: aluminium, stainless steel (AISI 304)
Pre-assembled and without roof per forat ion!
Not sui table for copper roofs – use AIO-FALZ-45!
AIO-SYST-03-500 END-, CORNER POINT in AIO-lifeline system for ZAMBELLI RIB-ROOF SPEED 500 (EN 795 C)Mountable on: system roof ZAMBELLI RIB-ROOF SPEED 500
Material (Mater ial thickness): steel (min. 0.63 mm), aluminium (min. 0.7 mm)Width of prof i le : 410 – 510 mm
Material: aluminium, stainless steel (AISI 304)
Pre-assembled and without roof per forat ion!
AIO-SYST-04-305-333AIO-SYST-04-400-500
END-, CORNER POINT in AIO-lifeline system for system roofs (EN 795 C)Mountable on: system roofs similar to KALZIP, INTERFALZ
Material (Mater ial thickness): steel (min. 0.5 mm), aluminium (min. 0.7 mm)Width of prof i le : 305 – 333 mm or 400 – 500 mm
Material: aluminium, stainless steel (AISI 304)
Pre-assembled and without roof per forat ion!
AIO-SYST-06-465 END-, CORNER POINT in AIO-lifeline system for ZAMBELLI RIB-ROOF 465 (EN 795 C)Mountable on: system roof ZAMBELLI RIB-ROOF 465
Material (Mater ial thickness): steel (min. 0.63 mm), aluminium (min. 0.7 mm)Width of prof i le : 410 – 510 mm
Material: aluminium, stainless steel (AISI 304)
Pre-assembled and without roof per forat ion!
AIO-SYST-09-500 END-, CORNER POINT AND INTERMEDIATE CABLE BRACKET in AIO-lifeline system for ZAMBELLI RIB-ROOF Evolution (EN 795 C)Mountable on: system roof ZAMBELLI RIB-ROOF Evolut ion
Material (Mater ial thickness): aluminium (min. 0.7 mm)Width of prof i le : 410 – 510 mm
Material: aluminium, stainless steel (AISI 304)
For use as end point, AIO-SHOCK-10 must be ordered!Pre-assembled and without roof per forat ion!
AIO-SYST-20-475-695 END-, CORNER POINT in AIO- lifeline system for trapezoidal covering sheet (EN 795 C)Mountable on: trapezoidal cover ing sheet
Mater ial: steel, aluminiumMaterial thickness: min. 0.5 mmWidth of prof i le: 475 – 695 mm
Material: aluminium, stainless steel (AISI 304)
Fastening set and sealing strips for trapezoidal cover included!(exact dimensions page 57)
ALL PRICES IN EURO (VAT EXCL.)
Priceper piece/PU
250.00
1.00
1.50
2.00
3.00
225.00
279.00
279.00
279.00
279.00
225.00
16
AIO-Horizontal lifeline systems
EXPERTS IN FALL PROTECTION
AIO-SYST-SZH Illustration Catalog N° Description
AIO-SYST-01-410-610-SZH INTERMEDIATE CABLE BRACKET in AIO- lifeline system for standing seam roofs (EN 795 C)Mountable on: (Double-) standing seam roofs
Material (mater ial thickness): steel (min. 0.5 mm), aluminium (min. 0.7 mm)Width of prof i le: 410 – 610 mm
Material: aluminium, stainless steel (AISI 304)
Pre-assembled and without roof per forat ion!
Only for use as intermediate cable bracket in AIO- l i fel ine system!
Not sui table for copper roofs – use AIO-FALZ-25!
AIO-SYST-03-500-SZH INTERMEDIATE CABLE BRACKET in AIO- lifeline system for ZAMBELLI RIB-ROOF SPEED 500 (EN 795 C)Mountable on: system roof ZAMBELLI RIB-ROOF SPEED 500
Material (mater ial thickness): steel (min. 0.63 mm), aluminium (min. 0.7 mm)Width of prof i le: 410 – 510 mm
Material: aluminium, stainless steel (AISI 304)
Pre-assembled and without roof per forat ion!
Only for use as intermediate cable bracket in AIO- l i fel ine system!
AIO-SYST-04-305-333-SZHAIO-SYST-04-400-500-SZH
INTERMEDIATE CABLE BRACKET in AIO- lifeline system for system roofs (EN 795 C)Mountable on: system roofs similar to KALZIP, INTERFALZ
Material (mater ial thickness): steel (min. 0.5 mm), aluminium (min. 0.7 mm)Width of prof i le: 305 – 333 mm or 400 – 500 mm
Material: aluminium, stainless steel (AISI 304)
Pre-assembled and without roof per forat ion!
Only for use as intermediate cable bracket in AIO- l i fel ine system!
AIO-SYST-06-465-SZH INTERMEDIATE CABLE BRACKET in AIO- lifeline system for ZAMBELLI RIB-ROOF 465 (EN 795 C)Mountable on: system roof ZAMBELLI RIB-ROOF 465
Material (mater ial thickness): steel (min. 0.63 mm), aluminium (min. 0.7 mm)Width of prof i le: 410 – 510 mm
Material: aluminium, stainless steel (AISI 304)
Pre-assembled and without roof per forat ion!
Only for use as intermediate cable bracket in AIO- l i fel ine system!
AIO-SYST-20-475-695-SZH INTERMEDIATE CABLE BRACKET in AIO- lifeline system for trapezoidal covering sheet (EN 795 C)Mountable on: trapezoidal cover ing sheet
Mater ial: steel, aluminiumMaterial thickness: min. 0.5 mmWidth of prof i le: 475 – 695 mm
Material: aluminium, stainless steel (AISI 304)
distance from cable to raised bead c. 200 mm
Fastening set and sealing strips included!(exact dimensions page 57)
AIO-FALZ AIO-FALZ-45-640AIO-FALZ-45-790
END-, CORNER POINT in AIO-lifeline system for standing seam roofs (EN 795 C)Mountable on: (Double-) standing seam roofs
Material: aluminium, copper, titanium-zinc alloy, stainless steel, galvanised steel, etc.Mater ial thickness: min. 0.6 mmWidth of prof i le: 370 – 640 mm or 520 – 790 mm
Material: stainless steel (AISI 304)
Without roof per forat ion!
AIO-FALZ-25-640AIO-FALZ-25-790
INTERMEDIATE BRACKET in AIO-lifeline system for standing seam roofs (EN 795 C)Mountable on: standing seam roofs
Material: aluminium, copper, titanium-zinc alloy, stainless steel, galvanised steel, etc.Mater ial thickness: min. 0.6 mmWidth of prof i le: 370 – 640 mm or 520 – 790 mm
Material: stainless steel (AISI 304)
Without roof per forat ion!Only for use as intermediate cable bracket in AIO- l i fel ine system!Variable height adjustment up to 50 mm (VL-20-50) to increase the spacing between the l i fel ine system and the roof ing!
ALL PRICES IN EURO (VAT EXCL.)
Priceper piece/PU
178.00
178.00
178.00178.00
178.00
225.00
294.00314.00
174.00194.00
17
AIO-Horizontal lifeline systems
ATTENTION: Read the latest INNOTECH instructions for installation and usage of the products!
AIO-SANDIllustration Catalog N° Description
AIO-SAND-10-A2 END-, CORNER AND INTERMEDIATE CABLE BRACKET in AIO-lifeline system for trapezoidal sheet (EN 795 C)Mountable on: trapezoidal sheet
Material: steelMater ial thickness: min. 0.6 mmWidth of prof i le: 250 – 333.3 mm
Base plate dimensions: 360.5 x 415 x 2 mmMaterial: stainless steel (AISI 304)
Use as intermediate bracket, var iable height adjustment up to 50 mm (VL-20-50) to increase the spacing between the l i fel ine system and the roof ing!
Fastening set and sealing strips for trapezoidal cover included!(exact hole spacings page 57)
AIO-SAND-11-A2 END-, CORNER AND INTERMEDIATE CABLE BRACKET in AIO-lifeline system for trapezoidal sheet (EN 795 C)Mountable on: trapezoidal sheet
Material: steelMater ial thickness: min. 0.6 mmWidth of prof i le: 277.5 – 414 mm
Base plate dimensions: 389 x 430 x 2 mmMaterial: stainless steel (AISI 304)
Use as intermediate bracket, var iable height adjustment up to 50 mm (VL-20-50) to increase the spacing between the l i fel ine system and the roof ing!
Fastening set and sealing strips for trapezoidal cover included!(exact hole spacings page 57)
AIO-SAND-12-A2 END-, CORNER AND INTERMEDIATE CABLE BRACKET in AIO-lifeline system for trapezoidal sheet (EN 795 C)Mountable on: trapezoidal sheet
Material: aluminiumMaterial thickness: min. 0.7 mmWidth of prof i le: 250 – 333.3 mm
Base plate dimensions: 360.5 x 415 x 2 mmMaterial: stainless steel (AISI 304)
Use as intermediate bracket, var iable height adjustment up to 50 mm (VL-20-50) to increase the spacing between the l i fel ine system and the roof ing!
Fastening set and sealing strips for trapezoidal cover included!(exact hole spacings page 57)
AIO-VARIOAIO-VARIO-40 END-, CORNER POINT in AIO-lifeline system,
self-supporting (EN 795 C-E)Mountable on: f lat roofs up to 3° pi tch with parapet f inishDimensions: 1675 x 1675 mmWeight: c. 22 kgFinal weight: c. 350 kg
Filling material: concrete or 12 pcs. of concrete slabs (50 x 50 x 5 cm, 49 x 49 x 5 cm) or 16 pcs. of concrete slabs (50 x 50 x 3.8 cm)
Material: stainless steel (AISI 304)
Without roof per forat ion!
Concrete, concrete slabs not included!
AIO-VARIO-20 INTERMEDIATE ANCHOR POINT in AIO-lifeline system, self-supporting (EN 795 C-E)Mountable on: f lat roofs up to 3° pi tch with parapet f inishDimensions: 1675 x 586 mmWeight: c. 12 kgFinal weight: c. 180 kg
Filling material: concrete or 6 pcs. of concrete slabs (50 x 50 x 5 cm, 49 x 49 x 5 cm) or 8 pcs. of concrete slabs (50 x 50 x 3.8 cm)
Material: stainless steel (AISI 304)
Without roof per forat ion!
Variable height adjustment up to 50 mm (VL-20-50) to increase the spacing between the l i fel ine system and the roof ing!
Concrete, concrete slabs not included!
Product accessories (page 48)
ALL PRICES IN EURO (VAT EXCL.)
Priceper piece/PU
95.00
110.00
110.00
540.00
325.00
18 EXPERTS IN FALL PROTECTION
KIT-Horizontal lifeline systems
KIT-system variants overview
ALL PRICES IN EURO (VAT EXCL.)
LIFELINE-KIT
LIFELINE-KIT-SZH-10
AIO-EDLE-14
LIFELINE-KIT-EDLE-10
LIFELINE-KIT-EDLE-10
LIFELINE-KIT- SZH-10
LIFELINE-KIT
LIFELINE-KIT-SZH-10
AIO-EDLE-14
LIFELINE-KIT-EDLE-10
LIFELINE-KIT-EDLE-10
LIFELINE-KIT- SZH-10
19ATTENTION: Read the latest INNOTECH instructions for installation and usage of the products!
KIT-Horizontal lifeline systems
LIFELINE-KITIllustration Catalog N° Description
LIFELINE-KIT-10LIFELINE-KIT-15*LIFELINE-KIT-25*
PRE-ASSEMBLED HORIZONTAL LIFELINE SYSTEM (EN 795 C)Length: 10 / 15 / 25 mMaterial: stainless steel (AISI 304), aluminium (anodised), plast ic
Package includes:• 1 pce. end lock• 1 pce. shock absorber• Stainless steel cable
Quick assembly system – al l system components are in a single bucket!System is compat ible with al l AIO- l i fel ine system components!
*LIFELINE-KIT-15/-25 including 1 pce. of LIFELINE-KIT-SZH-10 (intermediate bracket)!
Corner and curve elements and intermediate brackets not included!
LIFELINE-KIT-EDLE-10 KIT-CORNER ELEMENT, cannot be passed over (EN 795 C)Mountable on: facade or wall Pass-over capabil i t y : inside and outside cornersConnect ion: fastening borehole Ø 17mmMaterial: stainless steel (AISI 304), aluminium (anodised)
Variable angle adjustment – with integrated shock absorber!
LIFELINE-KIT-SZH-10 KIT-INTERMEDIATE BRACKET, can be passed over (EN 795 C)Mountable on: AIO-STA, AIO-STX, AIO-FALZ, AIO-SAND, AIO-VARIO, AIO-SYST, etc. Connect ion: thread M16 Material: stainless steel (AISI 304)
Suitable for instal lat ion on posts – can only be passed over with steel carabiner!
Hex bolt M16 x 45 mm and hex nut M16 icluded!
ALL PRICES IN EURO (VAT EXCL.)
Priceper piece/PU
469.00519.00639.00
126.00
58.00
20 EXPERTS IN FALL PROTECTION
TEMP-Temporary lifeline systems
TEMP-system variants overview
ALL PRICES IN EURO (VAT EXCL.)
TEMP-ENDS-10
TEMP-ENDS-10
TEMP-ENDS-10
TEMP-SZH-10
TEMP-HASPEL
TEMP-SZH-10
TEMP-ENDS-10
TEMP-ENDS-10
TEMP-HASPEL
TEMP-HASPEL
BEF-412 BEF-412-1 AIO-STA-10
TEMP-ENDS-10
TEMP-ENDS-10
BEF-412 AIO-SZH-10 AIO-STA-10
BEF-412 BEF-412-1 AIO-STA-10
21ATTENTION: Read the latest INNOTECH instructions for installation and usage of the products!
TEMP-Temporary lifeline systems
TEMP Illustration Catalog N° Description
TEMP-ENDS-10 TEMPORARY END LOCK SET with integrated shock absorber (EN 795 B-C)Mountable on: steel or concrete beamApplicat ion: steel, facade or br idge construct ionLength of lashing strap: 4 mMaterial: aluminium (anodised), plast ic, galvanised steel
complete set for one cable span (PU = 2 pcs.)
can be quick ly at tached or detached at any point of the stainless steel cable (AIO-SEIL-30) – can be mounted on steel or concrete beams with lashing straps
Stainless steel cable (AIO-SEIL-30) not included!
TEMP-SZH-10 TEMPORARY INTERMEDIATE CABLE BRACKET (EN 795 B-C)Mountable on: steel or concrete beamApplicat ion: steel, facade or br idge construct ionLength of lashing strap: 2.5 mMaterial: aluminium (anodised), plast ic, galvanised steel
Can be mounted to steel or concrete beams with lashing straps (PU = 1 pce.)
TEMP-HASPEL-10-150TEMP-HASPEL-10-0
MOBILE CABLE PULLEY Material: stainless steel (AISI 304), galvanised steel
cable drum with brakes for pract ical rol l up of the stainless steel cable (AIO-SEIL-30)
TEMP-HASPEL-10-150 incl. stainless steel cable, weight ~85 kg!
Fastening sets for TEMP
BEF-412 STEEL CONSTRUCTION, CLAMPING CONSOLEMaterial: galvanised steelFlange thickness: 10 up to 40 mmWidth of steel beam: 125 – 415 mm
BEF-412-1 STEEL CONSTRUCTION, CLAMPING CONSOLEMaterial: galvanised steel
For creating end points with the temporary horizontal lifeline system (TEMP-ENDS-10)!
ALL PRICES IN EURO (VAT EXCL.)
Priceper piece/PU
520.00
139.00
2.490.002.190.00
349.00
79.00
22 EXPERTS IN FALL PROTECTION
VERT-Vertical lifeline systems
VERT-system variants overview
ALL PRICES IN EURO (VAT EXCL.)
VERT-SZH-50intermediate bracket
VERT-GLEIT-50free to move slider
VERT-SET-50fixation on the top
VERT-SET-50fixation at the ladder
VERT-SET-50fixation on the bottom
23ATTENTION: Read the latest INNOTECH instructions for installation and usage of the products!
VERT-Vertical lifeline systems
VERTIllustration Catalog N° Description
VERT-SET-50 VERTICAL COMPLETE SET with integrated shock absorber and cable pretension (EN 353-1)Mountable on: laddersRung dimensions: max. 45 x 45 mm, Ø 45 mmMaterial: stainless steel (AISI 304), aluminium
Additional safety fixation on the structure oft the building (VERT-SAFE-50) optionally available!Stainless steel cable (AIO-SEIL-30) not included! (page 12)
VERT-GLEIT-50 FREE TO MOVE SLIDER with integrated shock absorber, detachable, curve compatible (EN 353-1:2014)Material: stainless steel (AISI 304), (AISI 316)
can be quick ly at tached or detached at any point of the l i fel ine system
free to move the pass-through elements
1 pce. of triple lock carabiner (EN 362) included!
VERT-SZH-50 VERTIKAL-INTERMEDIATE BRACKET, can be passed over (EN 353-1)Mountable on: laddersRung dimensions: max. 45 x 45 mm, Ø 45 mmMaterial stainless steel (AISI 304)
Distance between intermediate bracket 5 m!
VERT-SAFE-50 ADDITIONAL PROTECTION for VERT-SET-50 (EN 353-1)Mountable on: structureMaterial: aluminium
Addit ional protect ion to fasten the VERT-SET-50 on the structure of the building!
VERT-TYP-50-CZVERT-TYP-50-DEVERT-TYP-50-DKVERT-TYP-50-ENVERT-TYP-50-ESVERT-TYP-50-FRVERT-TYP-50-HUVERT-TYP-50-ITVERT-TYP-50-NLVERT-TYP-50-PLVERT-TYP-50-PTVERT-TYP-50-ROVERT-TYP-50-SKVERT-TYP-50-SV
RATING PLATE (EN 353-1)Dimensions: 3 x 12 cmMaterial: plast ic
For st ick ing on VERT-SET-50!
Revision plaque included!
CZ = CZECH / DE = GERMAN / DK = DANISH / EN = ENGLISH / ES = SPANISHFR = FRENCH / HU = HUNGARIAN / IT = ITALIAN / NL = DUTCH / PL = POLISH PT = PORTUGUESE / RO = ROMANIAN / SK = SLOVAKIAN / SV = SWEDISH
Dimensions for VERT
ALL PRICES IN EURO (VAT EXCL.)
Priceper piece/PU
299.00
419.00
49.00
36.00
15.00
≥ 3
x
1050
≤≥
50≤ q
45
≥ 2
x
≤ 35
0≤
750
≤ 50
00≤
5000
≥ 50
NEW!
24 EXPERTS IN FALL PROTECTION
TAURUS-Rail systems
TAURUS-system variants overview
ALL PRICES IN EURO (VAT EXCL.)
TAURUS-BEF-10
TAURUS-BEF-90
TAURUS-BEF-12
TAURUS-VB-10
TAURUS-BEF-20
TAURUS-EA-10
TAURUS-BEF-30
TAURUS-EA-11
TAURUS-BEF-10or BEF-20
TAURUS-BEF-30 with STA-10
TAURUS-BEF-90
TAURUS-BEF-90
TAURUS-EA-10
TAURUS-EA-11
TAURUS-VB-10
TAURUS-RAIL-20
TAURUS-VB-10
TAURUS-VB-10
TAURUS-RAIL-40
TAURUS-RAIL-30
TAURUS-RAIL-30
TAURUS-RAIL-10
TAURUS-RAIL-10
TAURUS-RAIL-10
TAURUS-RAIL-10
TAURUS-BEF-30 with STA-10
TAURUS-EA-11
TAURUS-EA-11
TAURUS-AS-10 and AS-20
TAURUS-RAIL-50
TAURUS-AS-10 and AS-20
25ATTENTION: Read the latest INNOTECH instructions for installation and usage of the products!
TAURUS-Rail systems
TAURUSIllustration Catalog N° Description
TAURUS-BEF-10TAURUS-BEF-10-VE5
RAIL FASTENER for concreteMountable on: concrete, facade, steel construct ionPackaging unit : 1 piece / 5 piecesMaterial: aluminium
for fastening TAURUS-RAIL on concrete, facade and steel construct ion
Fastening accessories not included! (page 49)
TAURUS-BEF-12 RAIL FASTENER, steel construction, sliding nut M10Mountable on: steel construct ionPackaging unit : 5 piecesMaterial: stainless steel (AISI 304)
for fastening TAURUS-RAIL on steel construct ion
Fastening accessories not included! (page 49)(detai led i l lustrat ion page 56)
TAURUS-BEF-20 RAIL FASTENER for facadeMountable on: concrete, facade Through boreholes: 120 mmFor mount ing on concrete: 2 pcs. of adhesive anchorsMinimum dri l l depth for concrete: min. 100 mmMaterial: stainless steel (AISI 304)
for fastening TAURUS-RAIL on concrete and facade
Fastening accessories not included! (page 49)
TAURUS-BEF-30 RAIL FASTENER, fastening angleMountable on: AIO-STA postMaterial: stainless steel (AISI 304)
for fastening TAURUS-RAIL on AIO-STA post
Fastening accessories included!
TAURUS-BEF-40 RAIL FASTENER for woodMountable on: wood (min. 10/12 cm)Material: aluminium
for fastening TAURUS-RAIL on wood
Fastening accessories included!
TAURUS-BEF-90 FASTENING ELEMENT for ladderMountable on: rung
Rung dimension: max. Ø 47 mmMaterial: stainless steel (AISI 304)
for fastening TAURUS-RAIL on ladders
Fastening accessories included!
TAURUS-GLEIT-H-11 RAIL SLIDER, Horizontal (EN 795 D)Incl inat ion range: +/- 5°Material: stainless steel (AISI 304)
rai l sl ider for hor izontal usageSuitable for overhead systems!
TAURUS-PS-H-11-VE2 GUIDE SCREWS for TAURUS-GLEIT-H-11Packaging unit : 2 piecesMaterial: stainless steel (AISI 304)
Guide screw for TAURUS-GLEIT-H-11for f ix ing the sl ider dur ing abseil ing works!
TAURUS-GLEIT-V-20 RAIL SLIDER, Vertical (EN 353-1)Incl inat ion range: +/- 3°Material: stainless steel (AISI 304)
Rail sl ider for ver t ical usage including shock absorbing element!
TAURUS-GLEIT-A-30 RAIL SLIDER, Allround (EN 353-1 / EN 795 D)Material: stainless steel (AISI 304)
Rail sl ider for hor izontal and ver t ical usage including shock absorbing element!
ALL PRICES IN EURO (VAT EXCL.)
Priceper piece/PU
59.00249.00
39.00
79.00
34.00
69.00
39.00
379.00
49.00
629.00
799.00
26 EXPERTS IN FALL PROTECTION
TAURUS-Rail systems
TAURUSIllustration Catalog N° Description
TAURUS-RAIL-10-3000TAURUS-RAIL-10-6000
ALUMINIUM RAIL, straight runLength: 3000 / 6000 mmMaterial: aluminium
rail element with a straight run
TAURUS-RAIL-20-R320- 15TAURUS-RAIL-20-R320- 30TAURUS-RAIL-20-R320- 45TAURUS-RAIL-20-R320- 60TAURUS-RAIL-20-R320- 75TAURUS RAIL-20-R320- 90
RAIL CURVED CORNER, horizontalIncl inat ion: 15° / 30° / 45° / 60° / 75° / 90°Material: aluminium
Always instal l rai l fastening (TAURUS-BEF) on the rai l curved corner!
TAURUS-RAIL-30-R385-90 RAIL ARCH OUTSIDE, 90°Incl inat ion: 90°Material: aluminium
rail element for ver t ical and hor izontal (facade) usage
Always instal l rai l fastening (TAURUS-BEF) on the rai l curved corner!
TAURUS-RAIL-40-R385-90 RAIL ARCH INSIDE, 90°Incl inat ion: 90°Material: aluminium
rail element for ver t ical and hor izontal (facade) usage
Always instal l rai l fastening (TAURUS-BEF) on the rai l curved corner!
TAURUS-RAIL-50-1700-LITAURUS-RAIL-50-1700-RE
ALUMINIUM RAIL, TORSIONTorsion incl inat ion: 90°Length: 1700 mmMaterial: aluminium
rail element with a 90° torsion to lef t and r ight
TAURUS-TYP-10-CZTAURUS-TYP-10-DETAURUS-TYP-10-DKTAURUS-TYP-10-ENTAURUS-TYP-10-ESTAURUS-TYP-10-FR TAURUS-TYP-10-ITTAURUS-TYP-10-LTTAURUS-TYP-10-NLTAURUS-TYP-10-PLTAURUS-TYP-10-PTTAURUS-TYP-10-ROTAURUS-TYP-10-SKTAURUS-TYP-10-SVTAURUS-TYP-10-ZH
TAURUS RATING PLATE, horizontal (EN 795 D)Dimensions: 160 x 92 mmMaterial: stainless steel (AISI 304), plast ic
for ident i f y ing a hor izontal rai l system
Various fastening opt ions!
CZ = CZECH / DE = GERMAN / DK = DANISH / EN = ENGLISH / ES = SPANISHFR = FRENCH / IT = ITALIAN / LT = LITUANIAN / NL = DUTCH / PL = POLISH PT = PORTUGUESE / RO = ROMANIAN / SK = SLOVAKIAN / SV = SWEDISH ZH = CHINESE
TAURUS-TYP-20-CZTAURUS-TYP-20-DETAURUS-TYP-20-DKTAURUS-TYP-20-ENTAURUS-TYP-20-ESTAURUS-TYP-20-FR TAURUS-TYP-20-ITTAURUS-TYP-20-LTTAURUS-TYP-20-NLTAURUS-TYP-20-PLTAURUS-TYP-20-PTTAURUS-TYP-20-ROTAURUS-TYP-20-SKTAURUS-TYP-20-SVTAURUS-TYP-20-ZH
TAURUS RATING PLATE, vertical (EN 353-1)Dimensions: 160 x 92 mmMaterial: stainless steel (AISI 304), plast ic
for ident i f y ing a ver t ical rai l system
Various fastening opt ions!
CZ = CZECH / DE = GERMAN / DK = DANISH / EN = ENGLISH / ES = SPANISHFR = FRENCH / IT = ITALIAN / LT = LITUANIAN / NL = DUTCH / PL = POLISH PT = PORTUGUESE / RO = ROMANIAN / SK = SLOVAKIAN / SV = SWEDISH ZH = CHINESE
ALL PRICES IN EURO (VAT EXCL.)
Priceper piece/PU
87.00174.00
99.00
99.00
99.00
119.00
29.00
29.00
LI REr ightlef t
27ATTENTION: Read the latest INNOTECH instructions for installation and usage of the products!
TAURUS-Rail systems
TAURUSIllustration Catalog N° Description
TAURUS-TYP-30-CZTAURUS-TYP-30-DETAURUS-TYP-30-DKTAURUS-TYP-30-ENTAURUS-TYP-30-ESTAURUS-TYP-30-FR TAURUS-TYP-30-ITTAURUS-TYP-30-LTTAURUS-TYP-30-NLTAURUS-TYP-30-PLTAURUS-TYP-30-PTTAURUS-TYP-30-ROTAURUS-TYP-30-SKTAURUS-TYP-30-SVTAURUS-TYP-30-ZH
TAURUS RATING PLATE, all -round (EN 353-1 / EN 795 D)Dimensions: 160 x 92 mmMaterial: stainless steel (AISI 304), plast ic
for ident i f y ing an al l -round rai l system (ver t ical and hor izontal)Var ious fastening opt ions!
CZ = CZECH / DE = GERMAN / DK = DANISH / EN = ENGLISH / ES = SPANISHFR = FRENCH / IT = ITALIAN / LT = LITUANIAN / NL = DUTCH / PL = POLISH PT = PORTUGUESE / RO = ROMANIAN / SK = SLOVAKIAN / SV = SWEDISH ZH = CHINESE
TAURUS-TYP-35-CZTAURUS-TYP-35-DETAURUS-TYP-35-DKTAURUS-TYP-35-ENTAURUS-TYP-35-ESTAURUS-TYP-35-FR TAURUS-TYP-35-ITTAURUS-TYP-35-LTTAURUS-TYP-35-NLTAURUS-TYP-35-PLTAURUS-TYP-35-PTTAURUS-TYP-35-ROTAURUS-TYP-35-SKTAURUS-TYP-35-SVTAURUS-TYP-35-ZH
TAURUS INFORMATION SIGN (EN 353-1 / EN 795 D)Dimensions: 160 x 92 mmMaterial: stainless steel (AISI 304), plast ic
informat ion sign for an al l -round rai l system (ver t ical and hor izontal) that is f i xed on the transit ion from ver t ical to hor izontal
CZ = CZECH / DE = GERMAN / DK = DANISH / EN = ENGLISH / ES = SPANISHFR = FRENCH / IT = ITALIAN / LT = LITUANIAN / NL = DUTCH / PL = POLISH PT = PORTUGUESE / RO = ROMANIAN / SK = SLOVAKIAN / SV = SWEDISH ZH = CHINESE
TAURUS-EA-10 RAIL END UNIT, fixedMaterial: stainless steel (AISI 304)
no access to the system possible (end of the rai l)
Fastening accessories included!
TAURUS-EA-11 RAIL END UNIT, variableMaterial: stainless steel (AISI 304), aluminium
To step- in and step-out of TAURUS-GLEIT!
Fastening accessories included!
TAURUS-VB-10TAURUS-VB-10-VE5
RAIL CONNECTIONPackaging unit : 1 piece / 5 piecesMaterial: aluminium
Connect ing element for al ignment of two TAURUS-RAIL elements
Fastening accessories included!
TAURUS-VB-12TAURUS-VB-12-VE5
RAIL CONNECTIONPackaging unit : 2 pieces / 10 piecesMaterial: galvanised steel
for the al ignment of two TAURUS-RAIL elements
Rail connect ion must only be used together with TAURUS-BEF-12!
TAURUS-AS-10 STABILISATION VERTICAL ELEMENT, TAURUS (EN 353-1)Material: stainless steel (AISI 304), aluminium
for the ver t ical step-out of a ladder
TAURUS-AS-20 STABILISATION ELEMENT, TAURUS (EN 353-1)Material: stainless steel (AISI 304), aluminium
for the ver t ical step-over of a ladder
TAURUS-AS-10 must be ordered additionally!
ALL PRICES IN EURO (VAT EXCL.)
Priceper piece/PU
29.00
29.00
17.00
89.00
49.00209.00
6.0012.00
299.00
179.00
28 EXPERTS IN FALL PROTECTION
BARRIER-Guardrail systems
BARRIER-system variants overview
BARRIER-VARIO SIDE PROTECTION SYSTEM – held by deadweight loadMaterial: aluminium, stainless steel (AISI 304)Mountable on: f lat roofs (max. 10° pi tch)System pitch (preassembled): 90°, 75°
Without roof per forat ion – parapet of at least 50 mm required! Preassembled bracket with post, plast ic-encased concrete-counterweight (c. 25 kg) with carry ing handles!
For parapets < 150 mm, an additional toe board (expansion element) is required!
BARRIER-ATTIKA-SEITLICH SIDE PROTECTION SYSTEM – inside or outside of parapetMaterial: aluminium, stainless steel (AISI 304) Mountable on: parapet (inside or outside)System pitch: 90°, 75°, 60°
BARRIER-ATTIKA-SEITLICH (KLAPPBAR)
SIDE PROTECTION SYSTEM – inside of parapet (fold-away)Material: aluminium, stainless steel (AISI 304)Mountable on: parapet (inside)System pitch: 0°, 90°
system can be folded away (while not in use!)This model is avai lable in segments of up to 3 m (2 posts required per segment!)
No connect ion of the indiv idual segments necessary!(No door element can be buil t into this system.)
BARRIER-ATTIKA-OBEN SIDE PROTECTION SYSTEM – top of parapetMaterial: aluminium, stainless steel (AISI 304)Mountable on: parapet (top)System pitch: 90°
For parapets < 150 mm, an additional toe board (expansion element) is required!
BARRIER-DACH SIDE PROTECTION SYSTEM – roofMaterial: aluminium, stainless steel (AISI 304)Mountable on: roofSystem pitch: 90°
For parapets < 150 mm, an additional toe board (expansion element) is required!
ALL PRICES IN EURO (VAT EXCL.)
BARRIER-R30
BARRIER-T23
BARRIER-R11
BARRIER-S10
BARRIER-V10 / BARRIER-V81
BARRIER-R91
BARRIER-V10
BARRIER-V12 BARRIER-R21
BARRIER-R11
BARRIER-R30
BARRIER-V91
BARRIER-R50
BARRIER-T20
29ATTENTION: Read the latest INNOTECH instructions for installation and usage of the products!
BARRIER-Guardrail systems
BARRIERIllustration Catalog N° Description
BARRIER-A10 ADAPTER on the side of the parapetMountable on: concrete, steel construct ionSystem pitch: 90°, 75°, 60°Material: aluminium, stainless steel (AISI 304)
for fastening the post BARRIER-S13 to the inside of the parapet
Fastening set not included! (page 49)
BARRIER-A11 ADAPTER on the side of the parapet, foldableMountable on: concrete, steel construct ionSystem pitch: 90°, foldableMaterial: aluminium, stainless steel (AISI 304)
for fastening the post BARRIER-S13 to the inside of the parapet
Fastening set not included! (page 49)
BARRIER-A21 ADAPTER on the top of the parapetMountable on: concrete, steel construct ionEf fect ive height: 135 mmMaterial: aluminium, stainless steel (AISI 304)
for fastening the post BARRIER-S13 to the top of the parapet
Fastening set not included! (page 49)
BARRIER-A31 SPACER BRACKET for parapetMountable on: concrete, steel construct ionMaterial: aluminium, stainless steel (AISI 304)
2 di f ferent adjustment ranges (65 mm – 105 mm or 100 mm – 145 mm)for BARRIER-A10 and BARRIER-A11
Fastening accessories for BARRIER-A10 / -A11 included!
Fastening accessories for parapet not included! (page 49)
BARRIER-D81 ADAPTER for AIO-STA postMountable on: AIO-STA postMaterial: aluminium, stainless steel (AISI 304)
for fastening of the post BARRIER-S13 on an AIO-STA post
Fastening accessories included!
BARRIER-F20 TOE BOARDHeight x width x length: 170 x 20 x 3000 mmMaterial: aluminium
for BARRIER-S11 / S12 and VARIO-adapter BARRIER-V12For use i f no parapet is avai lable that is not higher than 150 mm!
Fastening accessories (BARRIER-F21/-F22/-F23) not included!
BARRIER-F21 TOE BOARD BRACKET for fastening the toe board to the post BARRIER-S13Height x width: 25 x 45 mmPackaging unit : 2 piecesMaterial: aluminium, stainless steel (AISI 304)
for fastening the toe board BARRIER-F20 to the post BARRIER-S13
BARRIER-F22 TOE BOARD BRACKET for fastening the toe board to the VARIO-foot unit BARRIER-V12 Material: aluminium, stainless steel (AISI 304)
for fastening the toe board BARRIER-F20 to the VARIO-foot uni t BARRIER-V12
BARRIER-F23 TOE BOARD CONNECTOR SETPackaging unit : 2 piecesMaterial: aluminium, stainless steel (AISI 304)
for connect ing two toe boards BARRIER-F20
ALL PRICES IN EURO (VAT EXCL.)
Priceper piece/PU
38.00
42.00
81.00
45.00
86.00
71.00
24.00
23.00
11.00
NEW!
30 EXPERTS IN FALL PROTECTION
BARRIER-Guardrail systems
BARRIERIllustration Catalog Nr. Description
BARRIER-R11 ALUMINIUM PIPE, straightDiameter x wall thickness x length: 35 x 2 x 3000 mmMaterial: aluminium
BARRIER-R21 LINEAR TIEMaterial: aluminium, stainless steel (AISI 304)
for connect ing two rai l pipes BARRIER-R11
BARRIER-R30 CORNER TIEMaterial: aluminium, plast ic
for creat ing a corner of 2 rai l pipes BARRIER-R11Angle free adjustable!
BARRIER-R40 WALL TIESMountable on: concrete, steel construct ionMaterial: aluminium, plast ic
Angle free adjustable!
Fastening accessories not included! (page 49)
BARRIER-R50 END SEALMaterial: aluminium, plast ic
end seal of two rai l pipes BARRIER-R11Project ion of the rai l pipe max. 500 mm!
BARRIER-R91 END CAP for BARRIER-R11Diameter: 36 mmPackaging unit : 2 piecesMaterial: plast ic
end cap for rai l pipe BARRIER-R11Project ion of the rai l pipe max. 350 mm!
BARRIER-S11-1080 POST, system VARIO, straight, fastenedLength: 1080 mmMaterial: aluminium
BARRIER-S12-1150 BOOMLength: 1150 mmMaterial: aluminium
standard length for VARIO system, escape route as per plans
Special lengths upon request!
BARRIER-S13-1050 POST, straight, fastenedLength: 1050 mmMaterial: aluminium
BARRIER-T20 DOOR SETMaterial: aluminium
opening selectable up to 800 mm max.For load-bearing implementat ion, 2 x BARRIER-V10 weights required for each door side!
Fastening accessories included!
BARRIER-R11 not included!
BARRIER-T23 SIDE BARLength x width x height:565 x 45 x 25 mmMaterial: aluminium
side bar for BARRIER-R11 pipeProject ion of pipe max. 500 mm!
Fastening accessories included!
End caps BARRIER-R91 not included!
ALL PRICES IN EURO (VAT EXCL.)
Priceper piece/PU
24.00
11.00
24.00
23.00
28.00
2.00
28.00
13.00
26.00
242.00
27.00
31ATTENTION: Read the latest INNOTECH instructions for installation and usage of the products!
BARRIER-Guardrail systems
BARRIERIllustration Catalog Nr. Description
BARRIER-V10 VARIO-WEIGHTHeight x width x length: 122 x 395 x 395 mmWeight: 25 kgMaterial: plast ic, concrete
plast ic-coated concrete weight for foot uni t BARRIER-V12
BARRIER-V12 VARIO-FOOT UNITMaterial: aluminium, stainless steel (AISI 304)
VARIO foot uni t without boom/post, for creat ion of a load-bearing collect ive side protect ion
BARRIER-V81 VARIO-ADAPTER FOOTApplicat ion: creat ion of a sky l ight fencing of max. 2000 x 2000 mmMaterial: aluminium, stainless steel (AISI 304)
for fastening the post BARRIER-S13 to a VARIO-weight BARRIER-V10
BARRIER-V91 VARIO-CORNER TIEMaterial: stainless steel (AISI 304)
for rectangular connect ion of two brackets of BARRIER-S12
BARRIER-Z11-DEBARRIER-Z11-DKBARRIER-Z11-ENBARRIER-Z11-ESBARRIER-Z11-FRBARRIER-Z11-ITBARRIER-Z11-NL
RATING PLATE for BARRIER (EN 13374 / EN ISO 14122-3)
DE = GERMAN / DK = DANISH / EN = ENGLISH ES = SPANISH / FR = FRENCH / IT = ITALIANNL = DUTCH
BARRIER-Z31 FLAME-SCARF ANGLE for BARRIER-V10Material: aluminiumPackaging unit : 1 piece
for holding a VARIO-weight BARRIER-V10 in posi t ion
Per BARRIER-V10 min. 2 pieces of BARRIER-Z31 required!
BARRIER-Z33-250 UNDERLAY MAT for BARRIER-V12Height x width x length: 3 x 250 x 250 mmMaterial: PolyurethanePack ing unit : 1 i tems
underlay mat for one VARIO-BARRIER-V12 foot uni t
BARRIER-Z50-3000 FOOTWAY RAIL for emergency escape routesHeight x width x length: 50 x 80 x 3000 mmApplicat ion: emergency escape routesMaterial: aluminium
for the creat ion of emergency escape routes using concrete slabs
BARRIER-Z90 DRILLING JIG for BARRIER-S13 / -V12Material: stainless steel (AISI 304)
for true to size dr i l l ing of the clearance holes when shor tening the post BARRIER-S13 / -V12
BARRIER-Z91 INSTALLATION TOOL for BARRIER
1 x magnet ic nut SW 10 mm and 13 mm for chuck adapter1 x open-end box wrench SW 13 mm1 x al len key SW 4 mm with power ball head1 x pipe cut ter with deburrer
ALL PRICES IN EURO (VAT EXCL.)
Priceper piece/PU
44.00
53.00
54.00
9.00
23.00
14.00
1.20
51.00
71.00
226.00
32
LIGHT
LIGHT-V2
LWP-LIGHT
EXPERTS IN FALL PROTECTION
LIGHT-Skylight protection systems
LIGHT-Skylight protection systems overview
ALL PRICES IN EURO (VAT EXCL.)
33ATTENTION: Read the latest INNOTECH instructions for installation and usage of the products!
LIGHT-Skylight protection systems
MOBIEAP-MOBI-2000-2000
EAP-MOBI-3000-3000
MOBILE SKYLIGHT PROTECTION SYSTEM (EN 1263-1) including single anchor point (EN 795 B)Sizes: 2 x 2 m (max. sky l ight size 1.5 x 1.5 m) 3 x 3 m (max. sky l ight size 2.7 x 2.7 m) Mater ial: plast ic, galvanised steel
mesh net for cover ing the sky l ight inlcuding lashing strap (Lashing strap can be also used as single anchor point!)
No oversizes possible!
Mandatory inspect ion of the test threads see Serv ices!
LWP-LIGHTLWP-LIGHT SKYLIGHT PROTECTION SYSTEM for translucent corrugated sheets (EN 1263-1)
Mesh width: max. 100 x 100 mmMaterial: galvanised steel high l ight and smoke permeabil i t y – easy instal lat ion and back f i t t ing transpor t costs on a t ime and mater ial basis! Di f ferent RAL colours and special sizes upon request!
LIGHTIllustration Catalog N° Description
LIGHT SKYLIGHT PROTECTION SYSTEM (EN 1263-1)Mesh width: max. 100 x 100 mmMaterial: galvanised steel
high l ight and smoke permeabil i t y – easy instal lat ion and back f i t t ing
For sizes < 1 m², 1 m² wil l be charged!
Each order must contain the inner clearance (L) and the frame prof i le of the sky l ight!
Size surcharge of EURO 60.00 per size uni t and transpor t costs on a t ime and mater ial basis!
Di f ferent RAL colours, other mesh width and special shapes (round, e.g.) on request!(see i l lustrat ion on page 57)
LIGHT-V2LIGHT-V2-GITTERMATTE-800-800-VZ
LIGHT-V2-GITTERMATTE-1000-1000-VZLIGHT-V2-GITTERMATTE-1300-800-VZ
LIGHT-V2-GITTERMATTE-1300-1300-VZLIGHT-V2-GITTERMATTE-2200-1000-VZ
SKYLIGHT PROTECTION SYSTEM (EN 1263-1)Mesh width: max. 60 x 100 mmMaterial: galvanised steel
high l ight and smoke permeabil i t y – easy instal lat ion and back f i t t ing
Standard sizes on stock!
Amount of shock absorbers at least required:800 x 800 / 1000 x 1000 = 8 pcs.1300 x 800 = 10 pcs.1300 x 1300 / 2200 x 1000 = 12 pcs.
Fastening sets for LIGHT-V2
LIGHT-V2-LIPPE-<3-DAEMPFER-SET FASTENING SET for LIGHT-V2 (water nose ≤ 3 mm)Length: 240 mmMaterial: galvanised steelPackaging unit : 8 pieces
Fastening screws and rating plate included!
LIGHT-V2-LIPPE->3-DAEMPFER-SET BEFESTIGUNGSSET für LIGHT-V2 (Dichtlippe > 3 mm)Length: 240 mmMaterial: galvanised steelPackaging unit : 8 pieces
Fastening screws and rating plate included!
ALL PRICES IN EURO (VAT EXCL.)
Priceper piece/PU
1–2 pcs.3–4 pcs.
up to 5 pcs.
Upon request!
198.00/m2
152.00/m2
45.0050.0055.0080.0090.00
60.00
60.00
MOBI279.00
319.00
Upon request!
NEW!
34
SDH-02
DAS-21
EXPERTS IN FALL PROTECTION
SDH / DAS-Safety roof hooks
SDH / DAS-Safety roof hooks overview
ALL PRICES IN EURO (VAT EXCL.)
35ATTENTION: Read the latest INNOTECH instructions for installation and usage of the products!
SDH / DAS-Safety roof hooks
SDH Illustration Catalog N° Description Color
SDH-02-ST-1SDH-02-ST-10
SDH-02-ST-A-1SDH-02-ST-A-10
SDH-02-ST-B-1SDH-02-ST-B-10
SDH-02-ST-R-1SDH-02-ST-R-10
SAFETY ROOF HOOK for quick installation (EN 517 B) Mountable on: wood (min. 8/8 cm)Material: galvanised steel (coated)
Min. penetration into stat ic load-bearing construction is 80 mm!
2 x hot-dip galvanised screws (8 x 220 mm) included!
grey (RAL 7004)
anthraci te (RAL 7021)
brown (RAL 8017)
red (RAL 8004)
DASDAS-21-A2-1
DAS-21-A2-10
DAS-21-A2-ADAS-21-A2-BDAS-21-A2-R
SAFETY ROOF HOOK with cable sling (EN 517 B)Mountable on: wood (min. 5/10 cm or 8/5 when instal led under counter bat ten)Cable length: 1 mMaterial: stainless steel (AISI 304)
4 x hot-dip galvanised nails included!(5 x 150 mm, min. 3 grooves)
nature coloured
anthraci te (RAL 7021)
brown (RAL 8217)
red (RAL 8004)
Accessories for DAS-21
ADK-105 CAP for cable lead-through on cold roofsDimensions: Ø 105 mmMaterial: plast ic
black
ALL PRICES IN EURO (VAT EXCL.)
Color Priceper piece/PU
grey (RAL 7004)
anthraci te (RAL 7021)
brown (RAL 8017)
red (RAL 8004)
46.00451.00
(PU=10 pcs.)
52.00514.00
(PU=10 pcs.)
52.00514.00
(PU=10 pcs.)
52.00514.00
(PU=10 pcs.)
nature coloured
anthraci te (RAL 7021)
brown (RAL 8017)
red (RAL 8004)
85.00830.00
(PU=10 pcs.)
91.0091.0091.00
black 5.00
NEW!
36
FSG
FAS
EXPERTS IN FALL PROTECTION
FSG / FAS-Window safety railings overview
FSG / FAS-Window safety railings ALL PRICES IN EURO (VAT EXCL.)
37ATTENTION: Read the latest INNOTECH instructions for installation and usage of the products!
FSGIllustration Catalog N° Description
FSG-01-PROFI WINDOW SAFETY RAILING (EN 12811-1 / EN HD 1000)Adjustable range: 400 – 910 mmWeight: 5 kgMaterial: galvanised steel, plast ic
Telescoping frame!
FSG-02-PROFI WINDOW SAFETY RAILING (EN 12811-1 / EN HD 1000)Adjustable range: 770 – 1720 mmWeight: 7 kgMaterial: galvanised steel, plast ic
Telescoping frame!
FSG-03 WINDOW SAFETY RAILING (EN 12811-1 / EN HD 1000)Adjustable range: 490 – 730 mmWeight: 4.6 kgMaterial: galvanised steel, plast ic
FSG-04 WINDOW SAFETY RAILING (EN 12811-1 / EN HD 1000)Adjustable range: 700 – 1160 mmWeight: 5 kgMaterial: galvanised steel, plast ic
FSG-05 WINDOW SAFETY RAILING (EN 12811-1 / EN HD 1000)Adjustable range: 1100 – 1570 mmWeight: 5.9 kgMaterial: galvanised steel, plast ic
Accessories for FSG
FSG-SCHUTZKAPPE REPLACEMENT PROTECTIVE CAP for FSG-01 to FSG-05Packaging unit : 1 pieceMaterial: plast ic
FASFAS-01 FALL PREVENTION SYSTEM FOR WINDOWS (EN 12811-1 / EN HD 1000)
Adjustable range: 390 – 620 mmWeight: 1.1 kgMaterial: galvanised steel, plast ic
FAS-02 FALL PREVENTION SYSTEM FOR WINDOWS (EN 12811-1 / EN HD 1000)Adjustable range: 615 – 1115 mm und 1115 – 1610 mmWeight: 3.2 kgMaterial: galvanised steel, plast ic
2 x FAS-guide rods included!
FAS-03 FALL PREVENTION SYSTEM FOR WINDOWS (EN 12811-1 / EN HD 1000)Adjustable range: 1550 – 2400 mmWeight: 5.3 kgMaterial: galvanised steel, plast ic
Accessories for FAS
FH-S-RFH-S-W
FH-S-R-1000FH-S-W-1000
GUIDE BUSH, TYPE-SColour: red / whitePackaging unit : 1 piece / 1000 piecesMaterial: plast ic
for usage for al l standard window prof i les
FH-B-RFH-B-W
GUIDE BUSH, TYPE-BColour: red / whitePackaging unit : 1 pieceMaterial: plast ic
for hollow cav i t y and centre spar prof i lesThreaded joint necessary!
SB-12 STEP DRILL BIT, Ø 6-12 mmMaterial: HSS-steel
for guide bush instal lat ion, for a ground joint
FSG / FAS-Window safety railings ALL PRICES IN EURO (VAT EXCL.)
Priceper piece/PU
605.00
729.00
530.00
540.00
550.00
12.00
285.00
285.00
575.00
1.001.00
950.00950.00
1.001.00
55.00
38 EXPERTS IN FALL PROTECTION
EAP-Single anchor points
Fastening sets for EAP-STABIL-10
BEF-104-A4 CONCRETE (min. C20/25) – cracked and uncrackedMaterial: stainless steel (AISI 316)Package: 4 x anchor bol ts FISCHER FAZ II 12/10 A4
Dril l depth min. 105 mm (Ø 12 mm)!
BEF-201 WOOD – TIMBER RAFTER (min. 16 x 16 cm)Material: galvanised steel Package: 8 x fastening bol ts (8 x 140 mm)
8 x washer (coni form)
Min. penetrat ion into stat ic load-bearing construct ion: 100 mm!
BEF-203 WOOD –STEEP ROOF, TIMBER RAFTER (min. 8 x 10 cm)Material: galvanised steelPackage: 1 x steep roof fastening bar (1250 x 195 x 35 mm)
8 x fastening bol ts (8 x 220 mm) (includes fastening accessories for post instal lat ion)
Min. penetrat ion into stat ic load-bearing construct ion: 90 mm!
BEF-206 WOOD – RIDGE INSTALLATION, TIMBER RAFTER (min. 8 x 8 cm)Material: galvanised steel
Wood cross-sect ion of load-bearing wood min. 80 x 80 mm, strength of panell ing 20 mm!Min. penetrat ion into stat ic load-bearing construct ion: 80 mm!For the f ixat ion 12 pcs. fastening bolts are required.
Fastening material not included! (page 49)
BEF-303 TRAPEZOIDAL SUPPORTING SHEET, FASTENING FRAMEMaterial: galvanised steelDimensions: 840 x 840 x 40 mmSheet metal thickness: min. 0.6 mm
for opt imal load distr ibut ion on trapezoidal suppor t ing sheet, widely var ied useabil i t y
Fastening set (BEF-303-1 / BEF-303-3) not included! (see below)
BEF-303-1 TRAPEZOIDAL SUPPORTING SHEET, QUICK FASTENING BRACKETMaterial: galvanised steelPackage: 4 x fastening bracket
16 x bore fastenerSheet metal thickness: min. 0.6 mmRaised bead width: min. 60 mm(exact dimensions page 57)
BEF-303-3 TRAPEZOIDAL SUPPORTING SHEET, SPECIAL TOGGLE FASTENERMaterial: galvanised steelPackage: 4 x special toggle fastenerSheet metal thickness: min. 0.6 mmRaised bead width: max. 60 mmFree space under raised bead min. 115 mm, bore diameter Ø 28 mm(exact dimensions page 57)
BEF-401-10 STEEL CONSTRUCTION, COUNTER PLATE (150 x 150 x 8 mm)Material: galvanised steelMax. width of steel construct ion: 105 mm
Fastening accessories not included! (page 49)
EAP-STABILIllustration Catalog N° Description
EAP-STABIL-10-300EAP-STABIL-10-400EAP-STABIL-10-500EAP-STABIL-10-600
SINGLE ANCHOR POINT-STANDARD POST with rotating anchorage eye (EN 795 A)Mountable on: concrete, wood, trapezoidal sheet, steel construct ion, etc.Post heights: 300 / 400 / 500 / 600 mm, Ø 48 mmBase plate dimensions: 150 x 150 x 8 mmMaterial: galvanised steel, stainless steel (AISI 304)
Thermal insulat ion cap and sealing sleeve see Product accessories (page 48)
Fastening set not included! (see below)
ALL PRICES IN EURO (VAT EXCL.)
29.00
14.00
129.00
99.00
150.00
35.00
75.00
19.00
Priceper piece/PU
119.00
NEW!
39ATTENTION: Read the latest INNOTECH instructions for installation and usage of the products!
EAP-Single anchor points
Fastening sets for EAP-STABIL-10
Illustration Catalog N° Description
BEF-403 STEEL CONSTRUCTION, COUNTER PLATE (140 x 20 x 10 mm)Material: galvanised steelPackaging unit : 2 piecesMax. width of steel construct ion: 105 mm
Fastening accessories not included! (page 49)
BEF-412 STEEL CONSTRUCTION, CLAMPING CONSOLEMaterial: galvanised steelFlange thickness: 10 up to 40 mmWidth of steel beam: 125 – 415 mm
EAP-STX-10EAP-STX-10-100-250 SINGLE ANCHOR POINT-STANDARD POST with rotating anchorage eye
for quick installation (EN 795 A)Mountable on: trapezoidal sheet
Material: steelMater ial thickness (without coat ing): min. 0.75 mmInsulat ion thickness: 100 – 250 mm
Post height over aqui fer c. 200 mmMaterial: coated steel (RAL 9005), aluminium, stainless steel (AISI 304)
Af ter instal lat ion the post has to be sealed in professionally!
Fastening material (4 pcs. bore fastener per post, see below) and installation tool (page 51) not included!
Fastening sets for STX-10
BBF-4,8-160-0-VZ
BBF-4,8-200-0-VZ
BBF-4,8-240-0-VZ
BBF-4,8-280-0-VZ
bore fastener, hexagonal A/F8, Ø 4.8 x 160, IR2, galvanised for insulat ion thickness of 100 – 140 mm, galvanisedbore fastener, hexagonal A/F8, Ø 4.8 x 200, IR2, galvanised for insulat ion thickness of 135 – 180 mm, galvanisedbore fastener, hexagonal A/F8, Ø 4.8 x 240, IR2, galvanised for insulat ion thickness of 175 – 220 mm, galvanisedbore fastener, hexagonal A/F8, Ø 4.8 x 280, IR2, galvanised for insulat ion thickness of 215 – 250 mm, galvanised
EAP-SLINGEAP-SLING-10
EAP-SLING-10-10STEEP ROOF SLING for steep roofs (EN 795 A)Mountable on: wood (min. 10/12 cm or 8/8 cm + min. 20 mm roof boarding)Cable diameter: Ø 5 mm, stainless steel (AISI 304)Sling length: 400 mmPackaging unit : 1 piece / 10 piecesMaterial: galvanised steel, stainless steel (AISI 304)
Min. penetrat ion into stat ic load-bearing construct ion is 100 or 80 mm!
Order additionally matching fastening bolts, according to the roof system (HBS Ø 8 mm, length= 100 – 400 mm)! (page 49)(detai led i l lustrat ion page 56)
EAP-POINTEAP-POINT-11-300EAP-POINT-11-400EAP-POINT-11-500 EAP-POINT-11-600
SINGLE ANCHOR POINT with rotating anchorage eye (EN 795 A)Mountable on: wood (min. 10/14 cm + min. 19 mm wood boarding or min. 14/14 cm without wood boarding)Post heights: 300 / 400 / 500 / 600 mm, Ø 18 mmDril l hole: Ø 18 mm (dr i l l depth min. 125 mm)Material: stainless steel (AISI 304)
EAP-POINT-12-300EAP-POINT-12-400EAP-POINT-12-500EAP-POINT-12-600
SINGLE ANCHOR POINT with rotating anchorage eye (EN 795 A)Mountable on: concrete (min. C16/20)Post heights 300 / 400 / 500 / 600 mm, Ø 18 mmDril l hole: Ø 18 mm (dr i l l depth min. 130 mm)Material: stainless steel (AISI 304)
quick instal lat ion with speci f ied torque
Ideal for annual inspect ion!
ALL PRICES IN EURO (VAT EXCL.)
250.00
1.00
1.50
2.00
3.00
46.00446.00
(PU=10 pcs.)
Priceper piece/PU
20.00
349.00
119.00
114.00
40 EXPERTS IN FALL PROTECTION
EAP-Single anchor points
EAP-QUAD-10 EAP-QUAD-10-300EAP-QUAD-10-400EAP-QUAD-10-500EAP-QUAD-10-600
EAP-QUAD-10-300-10EAP-QUAD-10-400-10EAP-QUAD-10-500-10EAP-QUAD-10-600-10
SINGLE ANCHOR POINT with rotating anchorage eye (EN 795 A)Mountable on: concrete, wood, trapezoidal sheet, steel construct ionPost heights: 300 / 400 / 500 / 600 mm, Ø 16 mmBase plate dimensions: 150 x 150 x 5 mmPackaging unit : 1 piece / 10 piecesMaterial: stainless steel (AISI 304)
Fastening set not included! (see below)
Fastening sets for EAP-POINT-13
BEF-110 CONCRETE (min. C20/25)Package: 1 x hammer capsule, FISCHER-Superbond-System
Dril l depth 120 mm (Ø 18 mm)!
Fastening sets for EAP-QUAD-10
BEF-104-A4 CONCRETE (min. C20/25) – cracked and uncrackedMaterial: stainless steel (AISI 316)Package: 4 x anchor bol ts FISCHER FAZ II 12/10 A4
Dril l depth min. 105 mm (Ø 12 mm)!
BEF-204 WOOD – TIMBER RAFTER (min. 16 x 16 cm)Material: galvanised steelPackage: 4 x fastening bol ts (8 x 120 mm)
4 x washers (coni form)
Min. penetrat ion into stat ic load-bearing construct ion is 110 mm!
BEF-303 TRAPEZOIDAL SUPPORTING SHEET, FASTENING FRAMEMaterial: galvanised steelDimensions: 840 x 840 x 40 mmSheet metal thickness: min. 0.6 mm
for opt imal load distr ibut ion on trapezoidal suppor t ing sheet, widely var ied useabil i t y
Fastening set (BEF-303-1 / BEF-303-3) not included! (page 41)
BEF-303-1 TRAPEZOIDAL SUPPORTING SHEET, QUICK FASTENING BRACKETMaterial: galvanised steelPackage: 4 x fastening bracket
16 x bore fastenerSheet metal thickness: min. 0.6 mmRaised bead width: min. 60 mm(exact dimensions page 57)
EAP-POINTAbbildung Bestell-Nr. Beschreibung
EAP-POINT-13-300-A2EAP-POINT-13-400-A2EAP-POINT-13-500-A2EAP-POINT-13-600-A2
SINGLE ANCHOR POINT with rotating anchorage eye (EN 795 A)Mountable on: concrete (min. C20/25)Post heights: 300 / 400 / 500 / 600 mm, Ø 16 mmDril l hole: Ø 18 mm (dr i l l depth min. 120 mm)Material: stainless steel (AISI 304)
For bounding in concrete: BEF-110, FISCHER FIS SB 390 S, HILTI HY 200 or HILTI HVU-TZ M16
Fastening set not included! (see below)
EAP-POINT-15-300-A2EAP-POINT-15-400-A2EAP-POINT-15-500-A2EAP-POINT-15-600-A2
SINGLE ANCHOR POINT with rotating anchorage eye (EN 795 A, DIBt)Mountable on: concrete (min. C20/25), steelPost heights: 300 / 400 / 500 / 600 mm, Ø 16 mmDril l hole: Ø 18 mm (dr i l l depth min. 100 mm)Material: stainless steel (AISI 304)
For bounding in concrete: FISCHER FIS SB 390 S
Fastening set not included!
ALL PRICES IN EURO (VAT EXCL.)
EAP-POINTPrice
per piece/PU
78.00
68.00
104.00
979.00(PU=10 pcs.)
29.00
14.00
150.00
35.00
10.00
NEW!
NEW!
41ATTENTION: Read the latest INNOTECH instructions for installation and usage of the products!
EAP-Single anchor points
Fastening sets for EAP-QUAD-10
Illustration Catalog Nr. Description
BEF-303-3 TRAPEZOIDAL SUPPORTING SHEET, SPECIAL TOGGLE FASTENERMaterial: galvanised steelPackage: 4 x special toggle fastenerSheet metal thickness: min. 0.6 mmRaised bead width: max. 60 mmFree space under raised bead min. 115 mm, bore diameter Ø 28 mm(exact dimensions page 57)
BEF-401-10 STEEL CONSTRUCTION, COUNTER PLATE (150 x 150 x 8 mm)Material: galvanised steelMax. width of steel construct ion: 105 mm
Fastening accessories not included! (page 49)
BEF-403 STEEL CONSTRUCTION, COUNTER PLATE (140 x 20 x 10 mm)Material: galvanised steelPackaging unit : 2 piecesMax. width of steel construct ion: 105 mm
Fastening accessories not included! (page 49)
EAP-QUAD-11EAP-QUAD-11-300EAP-QUAD-11-400EAP-QUAD-11-500EAP-QUAD-11-600
SINGLE ANCHOR POINT with rotating anchorage eye (EN 795 A)Mountable on: concrete, wood, trapezoidal sheet, steel construct ionPost heights: 300 / 400 / 500 / 600 mm, Ø 16 mmBase plate dimensions: 235 x 235 x 4 mmMaterial: stainless steel (AISI 304)
Fastening sets not included! (see below)
EAP-QUAD-12 EAP-QUAD-12-300EAP-QUAD-12-400EAP-QUAD-12-500EAP-QUAD-12-600
SINGLE ANCHOR POINT with rotating anchorage eye (EN 795 A)Mountable on: trapezoidal sheet
Material: steelMater ial thickness: min. 0.75 mm – max. 1.5 mm
Post heights: 300 / 400 / 500 / 600 mm, Ø 16 mmBase plate dimensions: 390 x 400 x 2 mmMaterial: coated steel (RAL 7035), stainless steel (AISI 304)
Fastening set included!(exact hole spacings page 56)
Fastening sets for EAP-QUAD-11
BEF-103 CONCRETE (min. C20/25) / HOLLOW CONCRETE SLAB (min. C50-60, B4)Material: galvanised steelPackage: 4 x screw- in anchor HILTI HUS-H 8 x 55 mm
Dril l depth on concrete min. 60 mm (Ø 8 mm), Hollow slab cross sect ion (concrete thickness) min. 35 mm!
BEF-205 WOOD – SANDWICH STRUCTURED COMPOSITEMaterial: galvanised steel Package: 4 x fastening bol ts (8 x 120 mm)
8 x fastening bol ts (6 x 40 mm)
Wood cross-sect ion of load-bearing wood min. 80 x 100 mm, strength of panell ing 20 mm!Min. penetrat ion into stat ic load-bearing construct ion: 95 mm!
BEF-501-A2 TRAPEZOIDAL SUPPORTING SHEET, UNIVERSAL FASTENERMaterial: stainless steel (AISI 304)Package: 4 x universal fastenerSheet metal thickness: min. 0.75 mm
ALL PRICES IN EURO (VAT EXCL.)
Priceper piece/PU
75.00
19.00
20.00
132.00
122.00
14.00
16.00
61.00
42 EXPERTS IN FALL PROTECTION
EAP-QUAD-13Illustration Catalog N° Description
EAP-QUAD-13-300EAP-QUAD-13-400EAP-QUAD-13-500EAP-QUAD-13-600
EAP-QUAD-13-300-10EAP-QUAD-13-400-10EAP-QUAD-13-500-10EAP-QUAD-13-600-10
SINGLE ANCHOR POINT with rotating anchorage eye (EN 795 A, DIBt)Mountable on: concrete, trapezoidal sheet Post heights: 300 / 400 / 500 / 600 mm, Ø 16 mmBase plate dimensions: 212 x 212 x 5 mmPackaging unit : 1 piece / 10 piecesMaterial: coated steel (RAL 7004), stainless steel (AISI 304)
Fastening set not included!(exact hole spacings page 56)
EAP-SPAREAP-SPAR-10-25 SINGLE ANCHOR POINT with rotating (replacement) anchorage eye (EN 795 A)
Mountable on: AIO-/EAP–STA(BIL), AIO-/EAP-SYST, AIO-/EAP-FALZ-45(-15), AIO-/EAP-SAND, steel constructionThread length to use: 29 mmThread: M16 (DIN 933, ISO 4017)Material: stainless steel (AISI 304)
Not sui table for AIO-/EAP-VARIO, EAP-POINT!
Fastening set included!
EAP-SPAR-11-50 SINGLE ANCHOR POINT with rotating anchorage eye (EN 795 A)Mountable on: steel construct ionThread length to use: 50 mmThread: M16Clamping range: 27 mmDril l hole: Ø 17 mmMaterial: stainless steel (AISI 304)
EAP-SPAR-11-125 SINGLE ANCHOR POINT with rotating anchorage eye (EN 795 A)Mountable on: concrete (min. C20/25)Thread length to use: 125 mmThread: M16Dril l hole: Ø 18 mm (dr i l l depth min. 125 mm)Material: stainless steel (AISI 304)
Not sui table for the instal lat ion on a f lat roof!
For bounding in concrete: FISCHER FIS SB 390 or HILTI HY 200
Fastening set not included!
EAP-ABP-10EAP-ABP-10-30-A4 SINGLE ANCHOR POINT with rotating abseiling eye (EN 795 A)
Mountable on: steel construction, AIO-STA (up to max. 500 mm length), AIO-SYST, AIO-FALZ-45Thread length to use: 29 mmThread: M16 (DIN 933, ISO 4017)Material: stainless steel (AISI 316)
for abseil ing
Fastening set included!
EAP-Single anchor points
Fastening sets for EAP-QUAD-13
BEF-104-A4 CONCRETE (min. C20/25) – cracked and uncrackedMaterial: stainless steel (AISI 316)Package: 4 x anchor bol ts FISCHER FAZ II 12/10 A4
Dril l depth min. 105 mm (Ø 12 mm)!
BEF-304 TRAPEZOIDAL SUPPORTING SHEET, BORE FASTENERMaterial: galvanised steelPackage: 12 x bore fastener
12 x centr ing washerSheet metal thickness: min. 0.75 up to max. 1.50 mm
BEF-307 TRAPEZOIDAL SUPPORTING SHEET, SPECIAL ANCHOR BOLTMaterial: stainless steel (AISI 304), plast icPackage: 4 x special anchor bol t Sheet metal thickness: min. 0.63 mm
BEF-502-A2 TRAPEZOIDAL SUPPORTING SHEET, SPECIAL TOGGLE FASTENERMaterial: stainless steel (AISI 304)Package: 4 x special toggle fastenerSheet metal thickness: min. 0.75 mm
ALL PRICES IN EURO (VAT EXCL.)
Priceper piece/PU
91.00
879.00(PU=10 pcs.)
49.00
24.00
28.00
55.00
29.00
17.00
32.00
84.00
NEW!
43ATTENTION: Read the latest INNOTECH instructions for installation and usage of the products!
EAP-SPARIllustration Catalog N° Description
EAP-SPAR-11-200EAP-SPAR-11-300EAP-SPAR-11-400EAP-SPAR-11-500
SINGLE ANCHOR POINT with rotating anchorage eye (EN 795 A)Mountable on: concrete (min. C20/25), red br ick, wood, steel construct ionClamping width: clamping width [mm] = thread length to use [mm] minus 110 mmTread length to use: 200 /300 /400 / 500 mmThread: M16Dril l hole: Ø 18 mm (dr i l l depth min. 125 mm)Material: stainless steel (AISI 304)
Not sui table for instal lat ion on f lat roof!
Fastening set not included!
EAP-LOCKEAP-LOCK-13 SINGLE ANCHOR POINT-detachable, with rotating anchorage eye (EN 795 A)
Mountable on: receptacle sleeve EAP-LOCK-11Material: stainless steel (AISI 304), aluminium, brass
Higher safet y through innovat ive double lock system!
EAP-LOCK-11-100EAP-LOCK-11-150EAP-LOCK-11-200EAP-LOCK-11-300EAP-LOCK-11-400EAP-LOCK-11-500
RECEPTACLE SLEEVE for EAP-LOCK-13 (EN 795 A) Mountable on: concrete (min. C20/25), red br ick, wood, steel construct ionThread length to use: 100 / 150 / 200 /300 / 400 / 500 mmThread: M22Dril l hole: Ø 24 mm (dr i l l depth min. 110 mm)Accessories: 2 pieces of replacement caps in red and white colourMaterial: stainless steel (AISI 304)
with internal thread M10, can be used for pull -out test
Also for the usage outside. The product must not be used when the outside is exposed to weather condit ions.
for bounding in concrete: FISCHER FIS SB 390 or HILTI HY 200
Fastening set not included!Special lengths upon request!
EAP-LOCK-12-REAP-LOCK-12-W
REPLACEMENT CAP for EAP-LOCK-11 in red or white colourMaterial: plast ic
EAP-FALZ EAP-FALZ-15-640EAP-FALZ-15-790
SINGLE ANCHOR POINT with rotating anchorage eye for standing seam roofs (EN 795 A)Mountable on: (Double-) standing seam roofs
Material: aluminium, copper, t i tanium-zinc, stainless steel, galvanised steel, etc.Mater ial thickness: min. 0.6 mmWidth of prof i le: 370 - 640 mm or 520 - 790 mm
Material: stainless steel (AISI 304)
Without roof per forat ion!
EAP-Single anchor points
Fastening sets for EAP-SPAR-11
BEF-411 STEEL CONSTRUCTION, CLAMPING CONSOLEMaterial: galvanised steelFlange thickness: max. 16 mmWidth of steel beam: 55 up to 400 mm(exact dimensions page 57)
EAP-SPAR-15-125 SINGLE ANCHOR POINT with rotating anchorage eye (EN 795 A, DIBt)Mountable on: concrete (min. C20/25), steel construct ionTread length to use: 125 mmThread: M16Dril l hole: Ø 18 mm (dr i l l depth min. 125 mm)Material: stainless steel (AISI 304)
For bounding in concrete: FISCHER FIS SB 390 S
Fastening set not included!
ALL PRICES IN EURO (VAT EXCL.)
Priceper piece/PU
55.00
55.00
59.00
145.00
29.0030.0033.0044.0047.0049.00
2.00 2.00
299.00 319.00
NEW!
44 EXPERTS IN FALL PROTECTION
EAP-SYSTIllustration Catalog N° Description
EAP-SYST-01-410-610 SINGLE ANCHOR POINT with rotating anchorage eye for standing seam roofs (EN 795 A)Mountable on: (Doublel -) standing seam roofs
Material (material thickness): steel (min. 0.5 mm), aluminium (min. 0.7 mm)Width of prof i le: 410 – 610 mm
Material: aluminium, stainless steel (AISI 304)
Pre-assembled and without roof per forat ion!
Not sui table for copper roofs – use EAP-FALZ-15!
EAP-SYST-02-410-590-P SINGLE ANCHOR POINT with rotating anchorage eye for PREFA-standing seam roofs (EN 795 A)Mountable on: PREFA-system roofs
Material (mater ial thickness): aluminium (min. 0.7 mm)Width of prof i le: 410 – 590 mm
Material: aluminium, stainless steel (AISI 304)
Pre-assembled and without roof per forat ion!
EAP-SYST-03-500-Z SINGLE ANCHOR POINT with rotating anchorage eye for ZAMBELLI RIB-ROOF Speed 500 (EN 795 A)Mountable on: system roof ZAMBELLI RIB-ROOF Speed 500
Material (material thickness): steel (min. 0.63 mm), aluminium (min. 0.7 mm)Width of prof i le: 410 – 510 mm
Material: aluminium, stainless steel (AISI 304)
Pre-assembled and without roof per forat ion!
EAP-SYST-04-305-333EAP-SYST-04-400-500
SINGLE ANCHOR POINT with rotating anchorage eye for system roofs (EN 795 A)Mountable on: system roofs similar to INTERFALZ, KALZIP
Material (material thickness): steel (min. 0.5 mm), aluminium (min. 0.7 mm)Width of prof i le: 305 – 333 mm or 400 – 500 mm
Material: aluminium, stainless steel (AISI 304)
Pre-assembled and without roof per forat ion!
EAP-SYST-06-465-Z SINGLE ANCHOR POINT with rotating anchorage eye for ZAMBELLI RIB-ROOF 465 (EN 795 A)Mountable on: system roof ZAMBELLI RIB-ROOF 465
Material (material thickness): steel (min. 0.63 mm), aluminium (min. 0.7 mm)Width of prof i le: 410 – 510 mm
Material: aluminium, stainless steel (AISI 304)
Pre-assembled and without roof per forat ion!
EAP-SYST-09-500-Z SINGLE ANCHOR POINT with rotating anchorage eye for ZAMBELLI RIB-ROOF EVOLUTION (EN 795 A)Mountable on: system roof ZAMBELLI RIB-ROOF EVOLUTION
Material (mater ial thickness): aluminium (min. 0.7 mm)Width of prof i le: 400 – 500 mm
Material: aluminium, stainless steel (AISI 304)
Pre-assembled and without roof per forat ion!
EAP-Single anchor points ALL PRICES IN EURO (VAT EXCL.)
Priceper piece/PU
195.00
Available at
PREFA
Available at
ZAMBELLI
225.00225.00
Available at
ZAMBELLI
Available at
ZAMBELLI
45ATTENTION: Read the latest INNOTECH instructions for installation and usage of the products!
EAP-SANDIllustration Catalog N° Description
EAP-SAND-10-A2 SINGLE ANCHOR POINT with rotating anchorage eye for trapezoidal sheet (EN 795 A)Mountable on: trapezoidal sheet
Mater ial: steelMater ial thickness min. 0.6 mmWidth of prof i le: 250 – 333.3 mm
Base plate dimensions: 360.5 x 415 x 2 mmMaterial: stainless steel (AISI 304)
Fastening set and sealing strips included!(exact hole spacings page 57)
EAP-SAND-11-A2 SINGLE ANCHOR POINT with rotating anchorage eye for trapezoidal sheet (EN 795 A)Mountable on: trapezoidal sheet
Mater ial: steelMater ial thickness: min. 0.6 mmWidth of prof i le: 277.5 - 414 mm
Base plate dimensions: 389 x 430 x 2 mmMaterial: stainless steel (AISI 304)
Fastening set and sealing strips included!(exact hole spacings page 57)
EAP-SAND-12-A2 SINGLE ANCHOR POINT with rotating anchorage eye for trapezoidal sheet (EN 795 A)Mountable on: trapezoidal sheet
Mater ial: aluminiumMaterial thickness: min. 0.6 mmWidth of prof i le: 250 – 333.3 mm
Base plate dimensions: 360.5 x 415 x 2 mmMaterial: stainless steel (AISI 304)
Fastening set and sealing strips included!(exact hole spacings page 57)
EAP-INDUSTRYEAP-INDUSTRY-11 SINGLE ANCHOR POINT-STAINLESS STEEL CLAMP
for metal roof systems (EN 795 A)Mountable on: metal roof systems similar to INTERFALZ, KALZIP
Mater ial thickness: min. 1 mmMaterial: stainless steel (AISI 304)
Without roof per forat ion!
Not sui table for standing seam cover ings!
EAP-VARIO EAP-VARIO-10 SINGLE ANCHOR POINT-SELF SUPPORTING
with rotating anchorage eye (EN 795 E)Mountable on: f lat roofs up to 3° pi tch with parapetDimensions: 1675 x 1675 x 167 mmWeight: c. 22 kgFinal weight: c. 350 kgCan be f i l led with: concrete or 12 pcs. of concrete slabs (50 x 50 x 5 cm, 49 x 49 x 5 cm) or 16 pcs. of concrete slabs (50 x 50 x 3.8 cm)Material: stainless steel (AISI 304)
Without roof per forat ion!
Concrete or concrete slabs not included!
EAP-Single anchor points ALL PRICES IN EURO (VAT EXCL.)
Priceper piece/PU
99.00
119.00
125.00
112.00
550.00
46 EXPERTS IN FALL PROTECTION
PSA-Personal protective equipment
BRAKEPSA-BRAKE-2PSA-BRAKE-5PSA-BRAKE-10PSA-BRAKE-15PSA-BRAKE-20PSA-BRAKE-25
KERNMANTLE ROPE (Ø 12 mm) with length adjusting device (EN 353-2 / EN 354 / EN 358 / EN 795)Lengths: 2 / 5 / 10 / 15 / 20 / 25 m
PSA-BRAKE-2 without integrated shock absorber for:• Restraint system (EN 354)• Posit ioning system (EN 358)
of f PSA-BRAKE-5 with integrated shock absorber for:• Fall arrest system / restraint system (EN 353-2)• Posit ioning system (EN 358)• Temporary hor izontal l i fel ine system (EN 795)
PSA-STRINGIllustration Catalog N° Description
PSA-STRING-1/MPSA-STRING-1/L
SAFETY HARNESS (EN 358 / EN 361)Sizes: M (height < 1.8 m and/or < 1 m midsect ion circumference) L (height > 1.8 m and/or > 1 m midsect ion circumference)
ex tendible basic safet y harness (< 1kg) with automat ic buck ler in a bag
PSA-STRING-2 LANYARD (EN 354)Length: 470 mm
extension for PSA-STRING-1 (for work on a steep roof e.g.)
2 pieces of TRIPLE-LOCK carabiner (aluminium) included!
PSA-STRING-3/MPSA-STRING-3/L
RESTRAINT AND POSITIONING HARNESS for PSA-STRING-1 (EN 358)Sizes: M (wearer height < 1.8 m and/or < 1 m midsect ion circumference) L (height > 1.8 m and/or > 1 m midsect ion circumference)
ex tension for PSA-STRING-1
for addit ional use as hip harness for restraint and posit ioning work (EN 363)
PSA-STRING-4 SHOULDER PAD for PSA-STRING-1Detachable shoulder pad for addit ional comfor t while wearing the safet y harness PSA-STRING-1
PSA-STRING-5 SEAT BOARD for PSA-STRING-1ex tension for safet y harness PSA-STRING-1 for the usage while work ing suspended by cable
PSA-SETPSA-SET-BASIC/MPSA-SET-BASIC/L
PSA-SET for universal usage1 pce. PSA-STRING-1, safet y harness, size M / L, EN 358 / EN 3611 pce. PSA-BRAKE-10, Kernmant le rope (Ø 12 mm) with guided t ype fal l arrester
and integrated shock absorber, length 10 m (EN 353-2 / EN 358 / EN 795)1 pce. PSA-KARI-1, (Tr iple-Lock-Carabiner, aluminium, EN 362)
PSA-SET-DACH/MPSA-SET-DACH/L
PSA-SET for work on the roof1 pce. PSA-STRING-1, safet y harness, sizes M / L, EN 358 / EN 3611 pce. PSA-STRING-2, length 470 mm, EN 3541 pce. PSA-BRAKE-10, Kernmant le rope (Ø 12 mm) with guided t ype fal l arrester
and integrated shock absorber, length 10 m (EN 353-2 / EN 358 / EN 795)1 pce. PSA-TAPE-80, (band sl ing, length 0.8 m, EN 354 / EN 566 / EN 795)1 pce. PSA-KARI-1, (Tr iple-Lock carabiner, aluminium, EN 362)2 pcs. KA-TL-10-362-A2, (Tr iple-Lock carabiner, stainless steel (AISI 304), EN 362)
ALL PRICES IN EURO (VAT EXCL.)
99.00135.00160.00175.00195.00215.00
Priceper piece/PU
109.00109.00
39.00
85.0085.00
29.00
145.00
269.00
329.00
NEW!
47ATTENTION: Read the latest INNOTECH instructions for installation and usage of the products!
PSA-Personal protective equipment
SHARKIllustration Catalog N° Description
PSA-SHARK-2PSA-SHARK-5PSA-SHARK-10PSA-SHARK-15
KERNMANTLE ROPE (Ø 6 mm) with steel core and length adjusting device (EN 353-2 / EN 354 / EN 358 / EN 795)Lengths: 2 / 5 / 10 / 15 m
PSA-SHARK-2 without integrated shock absorber:• Restraint system (EN 354)• Posit ioning system (EN 358)
of f PSA-SHARK-5 with integrated shock absorber:• Fall arrest system / restraint system (EN 353-2)• Posit ioning system (EN 358)• Temporary hor izontal l i fel ine system (EN 795)
Edge tested according to prEN 354:2008 Annex A und CNB11/P/11.054!
KARIPSA-KARI-1 TRIPLE-LOCK CARABINER, aluminium (EN 362)
Material: aluminiumLoad-bearing capacit y : 22 kN
Closes automat ical l y!
KA-TL-10-362-A2 TRIPLE-LOCK CARABINER, stainless steel (EN 362)Material: stainless steel (AISI 304)Load-bearing capacit y : 22 kNreplacement carabiner for AIO-GLEIT-10 / -13
Closes automat ical l y!
TAPEPSA-TAPE-60PSA-TAPE-80
PSA-TAPE-120PSA-TAPE-150PSA-TAPE-200
TAPE SLING (EN 354 / EN 566 / EN 795)Material: polyester (PES)Dimensions: 25 x 2 mm Lengths: 0.6 / 0.8 / 1.2 / 1.5 / 2.0 mLoad capacit y : 22 kN
• for creat ing anchor points (EN 795)• for use as mountain cl imbing equipment (EN 566)• for use as lanyard (EN 354)
HSG
HSG-41-HWPS-3HSG-41-HWS-6HSG-41-HWS-9HSG-41-HWS-12
FALL ARREST DEVICE (EN 360)Material case: aluminium, plast icLanyard: rope (galvanised steel), harness strap (plast ic)
with carabiner hook and swivel at tachment
wire rope, galvanised, weight 1.9 kg, length 3 m (EN 360)wire rope, galvanised, weight 3.0 kg, length 6 m (EN 360)wire rope, galvanised, weight 3.7 kg, length 9 m (EN 360)wire rope, galvanised, weight 5.4 kg, length 12 m (EN 360)
HSG 41-HWB-3,5HSG 41-HWPB-9HSG 41-HWPB-12
belt strap, weight 1.4 kg, length 3.5 m (EN 360)belt strap, weight 2.3 kg, length 9 m (EN 360)belt strap, weight 3.4 kg, length 12 m (EN 360)
PSA-SCHRANKPSA-SCHRANK-W CUPBOARD for PPE, white
Material: steel painted whiteDimensions: 600 x 400 x 250 mm
for handy storage of PPE
ALL PRICES IN EURO (VAT EXCL.)
Priceper piece/PU
219.00 239.00
269.00 299.00
12.50
19.00
8.209.10
11.7013.7015.70
145.00215.00310.00357.00
135.00320.00355.00
159.00
48 EXPERTS IN FALL PROTECTION
ADM-Sealing sleeveIllustration Catalog N° Description
ADM-33-EB-ZYL SEALING SLEEVE with shrink tube, Ø 33 mmTotal height: 250 mmTube diameter: 33 mmElastomeric bi tumen sheet ing: Ø 470 mmMaterial: bi tumen, plast ic
For EAP-POINT and EAP-QUAD!
ADM-55-EB SEALING SLEEVE with shrink tube, Ø 55 mmTotal height: 250 mmTube diameter: 55 mmElastomeric bi tumen sheet ing: Ø 470 mmMaterial: bi tumen, plast ic
For EAP-STABIL and AIO-STA!
ISOL-Thermal isolation capISOL-16-300 THERMAL ISOLATION CAP, iØ 16 mm
Height: ~300 mmMaterial: plast ic
For EAP-POINT and EAP-QUADRAT!
ISOL-50-300 THERMAL ISOLATION CAP, iØ 50 mmHeight: ~300 mmMaterial: plast ic
For EAP-STABIL and AIO-STA!
VL-ExtensionsVL-10-200 EXTENSION SLEEVE, Ø 48 mm
Ex tension: up to max. 200 mmMaterial: stainless steel (AISI 304)
For EAP-STABIL and AIO-STA!
Must not be used for AIO end- and AIO corner units!
VL-20-50 EXTENSION SLEEVE, M16Ex tension: up to max. 50 mmMaterial: stainless steel (AISI 304)
Must not be used for AIO end- and AIO corner units!
Accessories lifeline systemAIO-STOP IDENTIFICATION LIFELINE SYSTEM, end of cable span
Material: stainless steel (AISI 304), aluminium, plast ic
is direct ly f i xed on the cable and indicates i t ‘s end
Fastening accessories included!
INNO-PLAK REVISION PLAQUE, INNOTECH®
Colour: foi l white, font blackPackaging unit : 10 piecesMaterial: plast ic
SHOCK-10 SHOCK ABSORBERMaterial: aluminium anodised
reduces the forces in the end points of an AIO l i fel ine systems
Enhancement of the cable def lect ion up to approx imately 50 cm!
Product accessories ALL PRICES IN EURO (VAT EXCL.)
Priceper piece/PU
41.00
41.00
19.00
19.00
115.00
25.00
49.00
14.90
49.00
49ATTENTION: Read the latest INNOTECH instructions for installation and usage of the products!
BEFZ-Fastening setsIllustration Catalog N° Description
HBS-8-80-T40-VZHBS-8-100-T40-VZHBS-8-120-T40-VZHBS-8-140-T40-VZHBS-8-160-T40-VZHBS-8-180-T40-VZHBS-8-200-T40-VZHBS-8-220-T40-VZHBS-8-320-T40-VZHBS-8-360-T40-VZHBS-8-400-T40-VZ
FASTENING BOLTS (Ø 8 mm) for wood substrateMaterial: galvanised
For f i t t ing the respect ive instal lat ion to the substructure!Observe the minimum penetrat ion into the load-bearing construct ionas speci f ied in the respect ive instruct ion manual!Special lengths upon request!
BS-M10-0-125-A2BS-M12-0-125-A2BS-M16-0-125-A2
KS-M16-0-9021-A2
WASHER (DIN 125, ISO 7089/7090) wi thout chamfer iØ 10.5 mm/M10WASHER (DIN 125, ISO 7089/7090) wi thout chamfer iØ 13 mm/M12WASHER (DIN 125, ISO 7089/7090) wi thout chamfer iØ 17 mm/M16LARGE DIAMETER WASHER (DIN 9021, ISO 7093) iØ 17 mm/M16Material: stainless steel (AISI 304)
HF-07-201-010-ST WASHER Ø 8.4 mm chipboard/MDF board countersunk screwsMaterial: galvanised steel
SKM-M12-0-934-A2SKM-M16-0-934-A2
HEX NUT (DIN 934, ISO 4032) with standard thread M12HEX NUT (DIN 934, ISO 4032) with standard thread M16Material: stainless steel (AISI 304)
SM-M12-0-985-A2SM-M16-0-985-A2
LOCK NUT (DIN 985, ISO 7040) M12LOCK NUT (DIN 985, ISO 7040) M16Material: stainless steel (AISI 304)
SKS-M10-20-933-A2SKS-M10-25-933-A2SKS-M10-30-933-A2SKS-M12-40-933-A2SKS-M12-60-933-A2SKS-M12-70-933-A2SKS-M16-60-933-A2SKS-M16-70-933-A2
HEX BOLT (DIN 933, ISO 4017) with standard thread w/o shaf t / M10 x 20 mmHEX BOLT (DIN 933, ISO 4017) with standard thread w/o shaf t / M10 x 25 mmHEX BOLT (DIN 933, ISO 4017) with standard thread w/o shaf t / M10 x 30 mm HEX BOLT (DIN 933, ISO 4017) with standard thread w/o shaf t / M12 x 40 mmHEX BOLT (DIN 933, ISO 4017) with standard thread w/o shaf t / M12 x 60 mmHEX BOLT (DIN 933, ISO 4017) with standard thread w/o shaf t / M12 x 70 mmHEX BOLT (DIN 933, ISO 4017) with standard thread w/o shaf t / M16 x 60 mmHEX BOLT (DIN 933, ISO 4017) with standard thread w/o shaf t / M16 x 70 mmMaterial: stainless steel (AISI 304)
GS-M12-1000-976GS-M16-1000-976
THREADED ROD (DIN 976) M12 x 1000 mmTHREADED ROD (DIN 976) M16 x 1000 mmMaterial: stainless steel (AISI 304)
Product accessories ALL PRICES IN EURO (VAT EXCL.)
Priceper piece/PU
1.601.601.601.902.002.102.402.602.903.103.40
0.300.300.350.45
0.50
0.400.45
0.801.00
1.001.001.001.201.201.202.102.10
17.00 31.00
50 EXPERTS IN FALL PROTECTION
Installation tools / Installation accessories (NOT DISCOUNTABLE) ALL PRICES IN EURO (VAT EXCL.)
51ATTENTION: Read the latest INNOTECH instructions for installation and usage of the products!
Installation tools / Installation accessories
MONT-MontagetoolsIllustration Catalog Nr. Description
MONT-1 INSTALLATION SET-11 x r ing spanner set and ratchet set for system instal lat ion1 x cable shears, 1 x plast ic mallet1 x parallel tension clamp, 1 x chain hoist2 x torque spanner (4–20 Nm, 20–100 mm)1 x hexagonal long socket (19 mm)1 x PSA-TAPE-60 Sling (EN 354, EN 795 B, EN 566, EN 1498 C)+ di f ferent accessories (sockets, bi t , elongat ion, etc.)
MONT-2 INSTALLATION SET-21 x chain hoist (3 m) up to 250 kg1 x parallel tension clamp (for Ø 3 – 9 mm)
MONT-M TORQUE SPANNER (20 to 100 Nm)includes 1 x long nut (19 mm)
MONT-S CABLE SHEARSfor cut t ing AIO-SEIL (Ø 8 mm) to length
MONT-N RIVET PLIERS (set in case)Hand r iveter for r ivets (3.2–6.4 mm)
Threaded nuts (M4–M10)
MONT-ANTISEIZE LUBRICANT for stainless steel thread3 x WEICON Ant iseize syr inges ASW 10000 (1 ml in 3 ml syr inge)
MONT-BO-32 HOLE CUTTER (up to Ø 32 mm)
MONT-BO-18-250MONT-BO-18-450
4-BIT HARD METAL HAMMER DRILL SDS-PLUSØ 18 mmOperat ing range: 200 mm or 400 mm
MONT-FIS-SB-390-S COMPOUND MORTAR1 x 390ml car tr idge (Fischer FIS SB 390 S with st yrene-free hybr id mor tar)2 x stat ic mixer
for use with EAP-POINT-13, EAP-LOCK, EAP-SPAR, etc.
MONT-RBM TUBE BENDING MACHINE with flaring feature maximum bending angle = 90° sui table for special corner sets in the AIO Li fel ine system (AIO-EDLE-16, AIO-EDLE-19) Grease the tube using ant iseize compound pr ior to f lar ing!
MONT-STX- DAEMMMATERIALBOHRER
MONT-STX- TRAPEZBLECHBOHRER
MONT-STX- VORSTECHER
INSTALLATION TOOL for STX-10 postØ 50 mm borer for insulat ion
INSTALLATION TOOL for STX-10 postØ 40 mm borer for the trapezoidal sheet
INSTALLATION TOOL for STX-10 postØ 4 mm, I = 390 mm to locate the raised bead
Priceper piece/PU
540.00
230.00
145.00
100.00
199.00
3.00(PU=3 pcs.)
125.00
50.0054.00
28.00
990.00
129.00
129.00
29.00
(NOT DISCOUNTABLE) ALL PRICES IN EURO (VAT EXCL.)
52 EXPERTS IN FALL PROTECTION
Fastening sets
Illustration Catalog Nr. Description
BEF-103 CONCRETE (min. C20/25) / HOLLOW CONCRETE SLAB (min. C50-60, B4)Material: galvanised steelPackage: 4 x screw- in anchor HILTI HUS-H 8 x 55 mmProduct: EAP-QUAD-11Dril l depth on concrete min. 60 mm (Ø 8 mm), Hollow slab cross sect ion (concrete thickness) min. 35 mm!
BEF-104-A4 CONCRETE (min. C20/25) – cracked and uncrackedMaterial: stainless steel (AISI 316)Package: 4 x anchor bol ts FISCHER FAZ II 12 / 10 A4Product: EAP-STABIL-10 / EAP-QUAD-10 /EAP-QUAD-13 / AIO-STA-10 / AIO-STA-11 / AIO-STA-12Dril l depth min. 105 mm (Ø 12 mm)!
BEF-107 HOLLOW CONCRETE SLAB (min. C50/60, B4)Material: galvanised steelPackage: 8 x hollow core anchor FISCHER FHY-M10 x 52
8 x hex bol t M10 x 60 (DIN 933) 8 x washer (M10)
Product: AIO-STA-12Hollow slab cross-sect ion (concrete thickness) min. 30 mm!
BEF-110 CONCRETE (min. C20/25)Package: 1 x adhesive anchor, FISCHER-Superbond-SystemProduct: EAP-POINT-13
Dril l depth 120 mm (Ø 18 mm)!
BEF-201 WOOD – TIMBER RAFTER (min. 16 x 16 cm)Material: galvanised steel Package: 8 x fastening bol ts (8 x 140 mm)
8 x washer (coni form)Product: EAP-STABIL-10 / AIO-STA-10 / AIO-STA-11Min. penetrat ion into stat ic load-bearing construct ion is 100 mm!
BEF-203 WOOD –STEEP ROOF, TIMBER RAFTER (min. 8 x 10 cm)Material: galvanised steelPackage: 1 x steep roof fastening bar (1250 x 195 x 35 mm)
8 x fastening bol ts (8 x 220 mm) (includes fastening accessories for post instal lat ion)
Product: EAP-STABIL-10 / AIO-STA-10 / AIO-STA-11Min. penetrat ion into stat ic load-bearing construct ion is 90 mm!
BEF-204 WOOD – TIMBER RAFTER (min. 16 x 16 cm)Material: galvanised steelPackage: 4 x fastening bol ts (8 x 120 mm)
4 x washers (coni form)Product: EAP-QUAD-10Min. penetrat ion into stat ic load-bearing construct ion is 110 mm!
BEF-205 WOOD – SANDWICH STRUCTURED COMPOSITEMaterial: galvanised steel Package: 4 x fastening bol ts (8 x 120 mm)
8 x fastening bol ts (6 x 40 mm)Product: EAP-QUAD-11Wood cross-sect ion of load-bearing wood min. 80 x 100 mm, strength of panell ing 20 mm!Min. penetrat ion into stat ic load-bearing construct ion is 95 mm!
BEF-206 WOOD – RIDGE INSTALLATION, TIMBER RAFTER (min. 8 x 8 cm)Material: galvanised steelProduct: EAP-STABIL-10 / AIO-STA-10Wood cross-sect ion of load-bearing wood min. 80 x 80 mm, strength of panell ing 20 mm!Min. penetrat ion into stat ic load-bearing construct ion is 80 mm!For the f ixat ion 12 pcs. fastening bolts are required.Fastening material not included! (page 49)
BEF-303 TRAPEZOIDAL SUPPORTING SHEET, FASTENING FRAMEMaterial: galvanised steelDimensions: 840 x 840 x 40 mmSheet metal thickness: min. 0.6 mmProduct: EAP-STABIL-10 / EAP-QUAD-10 / AIO-STA-10 / AIO-STA-11 / AIO-STA-12for opt imal load distr ibut ion on trapezoidal suppor t ing sheet, widely var ied useabil i t yFastening set (BEF-303-1 / BEF-303-3) not included!
BEF-303-1 TRAPEZOIDAL SUPPORTING SHEET, QUICK FASTENING BRACKETMaterial: galvanised steelPackage: 4 x fastening bracket
16 x bore fastenerSheet metal thickness: min. 0.6 mmRaised bead width: min. 60 mmProduct: BEF-303(exact dimensions page 57)
ALL PRICES IN EURO (VAT EXCL.) Price
per piece/PU
14.00
29.00
49.00
10.00
14.00
129.00
14.00
16.00
99.00
150.00
35.00
NEW!
53ATTENTION: Read the latest INNOTECH instructions for installation and usage of the products!
Fastening sets
Illustration Catalog Nr. Description
BEF-303-3 TRAPEZOIDAL SUPPORTING SHEET, SPECIAL TOGGLE FASTENERMaterial: galvanised steelPackage: 4 x special toggle fastenerSheet metal thickness: min. 0.6 mmRaised bead width: max. 60 mmProduct: BEF-303Free space under raised bead min. 115 mm, bore diameter Ø 28 mm(exact dimensions page 57)
BEF-304 TRAPEZOIDAL SUPPORTING SHEET, BORE FASTENERMaterial: galvanised steelPackage: 12 x bore fastener
12 x centr ing washerSheet metal thickness: min. 0.75 up to max. 1.50 mmProduct: EAP-QUAD-13
BEF-306-VE250
BEF-306-VE50
TRAPEZOIDAL COVER SHEET / SANDWICH PANEL, sealing rivetsMaterial: galvanised steelPackaging unit : 50 piece / 250 piecesSheet thickness (aluminium): min. 0.5 mm (without coat ing)Product: AIO-SAND-12Metal driller Ø 6,5 mm included!
BEF-307 TRAPEZOIDAL SUPPORTING SHEET, SPECIAL ANCHOR BOLTMaterial: stainless steel (AISI 304), plast icPackage: 4 x special anchor bol t Sheet metal thickness: min. 0.63 mmProduct: EAP-QUAD-13
BEF-401-10BEF-401-12
STEEL CONSTRUCTION, COUNTER PLATE (150 x 150 x 8 mm) / (300 x 300 x 8 mm)Material: galvanised steelMax. width of steel construct ion: 105 mm / 185 mm or 255 mmProduct: EAP-STABIL-10 / AIO-STA-10 / AIO-STA-11 / AIO-STA-16 / EAP-QUAD-10 BEF-401-12: AIO-STA-12Fastening accessories not included! (page 49)
BEF-403 STEEL CONSTRUCTION, COUNTER PLATE (140 x 20 x 10 mm)Material: galvanised steelPackaging unit : 2 piecesMax. width of steel construct ion: 105 mmProduct: EAP-STABIL-10 / AIO-STA-10 / AIO-STA-11 / AIO-STA-16 / EAP-QUAD-10Fastening accessories not included! (page 49)
BEF-404 TRAPEZOIDAL SUPPORTING SHEET, SCREW FASTENERMaterial: galvanised steelPackage: 4 x counter plate incl. screw mater ial, sealing washerSheet metal thickness: min. 0.7 mmProduct: AIO-STA-12Only for l imited use in the AIO Li fel ine system (BEF-404-1)!
BEF-404-1 TRAPEZOIDAL SUPPORTING SHEET, STABILISATION BARMaterial: galvanised steel Package: 2 x suppor t bars
4 x bore fastener 4 x centr ing washer
Sheet metal thickness: min. 0.7 mmProduct: BEF-404Only in combinat ion of BEF-404 to stabil ise corner - and end points!
BEF-411 STEEL CONSTRUCTION, CLAMPING CONSOLEMaterial: galvanised steelFlange thickness: max. 16 mmWidth of steel beam: 55 up to 400 mmProduct: EAP-SPAR-11(exact dimensions page 57)
BEF-412 STEEL CONSTRUCTION, CLAMPING CONSOLEMaterial: galvanised steelFlange thickness: 10 up to 40 mmWidth of steel beam: 125 – 415 mmProduct: EAP-STABIL-10 / AIO-STA-10 / AIO-STA-11 / TEMP-ENDS-10 / TEMP-SZH-10
BEF-412-1 STEEL CONSTRUCTION, CLAMPING CONSOLEMaterial: galvanised steelProduct: BEF-412 / AIO-STA-10 / TEMP
For creating end points with the temporary horizontal lifeline system (TEMP-ENDS-10)!
BEF-501-A2 TRAPEZOIDAL SUPPORTING SHEET, UNIVERSAL FASTENERMaterial: stainless steel (AISI 304)Package: 4 x universal fastenerSheet metal thickness: min. 0.75 mmProduct: EAP-QUAD-11
BEF-502-A2 TRAPEZOIDAL SUPPORTING SHEET, SPECIAL TOGGLE FASTENERMaterial: stainless steel (AISI 304)Package: 4 x special toggle fastenerSheet metal thickness: min. 0.75 mmProduct: EAP-QUAD-13
ALL PRICES IN EURO (VAT EXCL.) Price
per piece/PU
75.00
17.00
249.00(PU=250 pcs.)
59.00(PU=50 pcs.)
32.00
19.0039.00
20.00
75.00
59.00
59.00
349.00
79.00
61.00
84.00
NEW!
54 EXPERTS IN FALL PROTECTION
Presentation models ALL PRICES IN EURO (VAT EXCL.) Transport / Dienstleistungen ALL PRICES IN EURO (VAT EXCL.)Transport / Services ALL PRICES IN EURO (VAT EXCL.)
ServicesType / Catalog Nr. Description Price
not discountable
PP
Montage
MONT-RBM-MIETE
LOCK-PRUEF-MIETE
SCHULUNG-AIO-01
SCHULUNG-AIO-02
PRUEF-AIOPRUEF-PSAPRUEF-HSG
PRUEF-MOBI
Planning and project drawing
Instal lat ion
Rental of tube bending machine with f lar ing feature (MONT-RBM)
Rental of pul l -out tester (EAP-LOCK)
Instruct ion of Al l inONE fal l protect ion systems with pract ical exercises and instal lat ion tools (planning guidel ines, laws, standards etc.)Each fur ther par t icipant, without instal lat ion tool
Inspect ion of safet y systemsInspect ion of personal protect ive equipment (PPE)Inspect ion of fal l arrest dev icesInspect ion of test threads of EAP-MOBI
200.00per hour
85.00 per hour
100.00 per week
100.00 per week
1,490.002 days/per person
500.002 days/per person
Upon request!
Upon request!
Upon request!
55.00per inspect ion
TransportPrice
not discountable
Charging of transport costs on a time and material basis!
55ATTENTION: Read the latest INNOTECH instructions for installation and usage of the products!
Presentation models
Presentation Models Illustration Catalog Nr. Description
VERT-ENDS-11-DEMO VERTICAL – PRESENTATION MODEL (Vertical lifeline system)Scale: 1:1Length: 1.8 m
Original components (VERT-ENDS-11) mounted on aluminium ladder without intermediate cable brackets VERT-SZH-12 and VERT-GLEIT-10
AIO-PLUS-DEMO AIO – PRESENTATION MODEL (Horizontal lifeline system)Scale: 1:1
AIO-ENDS-10, AIO-SZH-10, AIO-GLEIT-10 mounted on steel construct ion
BARRIER-DEMO BARRIER – PRESENTATION MODEL (Safety railing) Scale: 1:1
Presentat ion case contains al l components for the presentat ion of the BARRIER-side protect ion system!
TAURUS-DEMO TAURUS – PRESENTATION MODEL (Rail system)Scale: 1:1
Presentat ion case contains the most common components for the presentat ion of TAURUS-rai l system!
LIGHT-DEMO LIGHT – PRESENTATION MODEL (Skylight protection) Scale: 1:1Dimensions: 360 x 360 mm
VARIO-DEMO VARIO – PRESENTATION MODELScale: 1:3
ALL PRICES IN EURO (VAT EXCL.) Präsentationsmodelle / Geschenkidee ALL PRICES IN EURO (VAT EXCL.)Presentation models / Gift ideas ALL PRICES IN EURO (VAT EXCL.)
Presentation Models
Illustration Catalog Nr. DescriptionPrice
per piece/PUnot discountable
VERT-ENDS-11-DEMO VERTICAL – PRESENTATION MODEL (Vertical lifeline system)Scale: 1:1Length: 1.8 m
Original components (VERT-ENDS-11) mounted on aluminium ladder without intermediate cable brackets VERT-SZH-12 and VERT-GLEIT-10
189.00
AIO-PLUS-DEMO AIO – PRESENTATION MODEL (Horizontal lifeline system)Scale: 1:1
AIO-ENDS-10, AIO-SZH-10, AIO-GLEIT-10 mounted on steel construct ion
339.00
BARRIER-DEMO BARRIER – PRESENTATION MODEL (Safety railing) Scale: 1:1
Presentat ion case contains al l components for the presentat ion of the BARRIER-side protect ion system!
729.00
TAURUS-DEMO TAURUS – PRESENTATION MODEL (Rail system)Scale: 1:1
Presentat ion case contains the most common components for the presentat ion of TAURUS-rai l system!
1,790.00
LIGHT-DEMO LIGHT – PRESENTATION MODEL (Skylight protection) Scale: 1:1Dimensions: 360 x 360 mm
29.00
VARIO-DEMO VARIO – PRESENTATION MODELScale: 1:3
119.00
GiftsIllustration Catalog Nr. Description Price
per piece/PU
KOCH-01KOCH-02KOCH-03
KOCH-04- DEKOCH-04- ENKOCH-05- DEKOCH-05- EN
INNOTECH COOKBOOK: Culinary Delights VOLUME 1INNOTECH COOKBOOK: Culinary Delights VOLUME 2INNOTECH COOKBOOK: Culinary Delights VOLUME 3INNOTECH COOKBOOK: Culinary Delights VOLUME 4 (German)INNOTECH COOKBOOK: Culinary Delights VOLUME 4 (English)INNOTECH COOKBOOK: Culinary Delights VOLUME 5 (German)INNOTECH COOKBOOK: Culinary Delights VOLUME 5 (English)
10.0010.0010.0010.0010.0010.0010.00
This edition of our price list substitutes all previously released price lists. This price list has been calculated based on the current price of stainless steel.
We reserve the right to correct the prices as the price trend for alloy surcharges is linked to the increases and decreases on the world market. We also reserve the right to correct mistakes and/or typos.
Our terms of business, delivery and installation conditions can be found on our website: www.innotech.at
56
EAP-QUAD-12 EAP-SLING
VERT
TAURUS BEF-12
t=3-6 mm = M10 x 20 DIN 933 A2
t= 7-11 mm = M10 x 25 DIN 933 A2
t= 12-16 mm = M10 x 30 DIN 933 A2
> 1
13 -
17t
> 0,
5
EAP-QUAD-13
≥ 3
x
1050
≤≥
50≤ q
45
≥ 2
x
≤ 35
0≤
750
≤ 50
00≤
5000
≥ 50
EXPERTS IN FALL PROTECTION
Dimensions / Hole spacings / Drill patterns
57
AIO-EDLE-19
SAND-10 SAND-11 SAND-12
>12>12
AIO/EAP-SAND-10 /-11 /-12
BEF-303-3 BEF-303-1
AIO-SYST-20 / SYST-20-SZH
LIGHTBEF-411
B max.
t=8 t=16 INNOTECH SPAR-11101 85 TYP-200
201 185 TYP-300
301 285 TYP-400
401 385 TYP-500
B
M16
>20
t = 8
- 16
ATTENTION: Read the latest INNOTECH instructions for installation and usage of the products!
Dimensions / Hole spacings / Drill patterns
K-Ceiling clearance
K-Inner clearance
N-Skylight dimension
ATTENTION: Read the latest INNOTECH instructions for installation and usage of the products!
Notes
www.innotech.at
QR-Codeto Product Finderwww.innotech.at
INNOTECH® Arbeitsschutz GmbHLaizing 10, 4656 Kirchham, Austria
T: +43 7619 22122-0F: +43 7619 22122-147E-mail: [email protected]
INNOTECH® Arbeitsschutz GmbHGarnisonsring 29, 57072 Siegen, Germany
T: +49 271 2341 94-0F: +49 271 2341 94-250E-mail: [email protected]
INNOTECH® Arbeitsschutz AGSeestrasse 14b, 5432 Neuenhof, Switzerland
T: +41 56 416 90 40F: +41 56 416 90 49E-mail: [email protected]