price book: motia sit-to-stand tables - herman miller€¦ · 2 motia® sit-to-stand tables price...
TRANSCRIPT
Z Motia® Sit-to-Stand Tables Price Book (4/20) 1
Introduction page2
Motia®Sit-to-StandTables 3
Adjustable-Height Table 5
Sit-to-Stand Table Bases 19
Power and Data Support 27
Screens 34
Storage 51
Accessories 57
Indices 59
By Name 59
By Number 61
Appendices
20-Day or Less/Assigned Lead-Time Order Information
Vary Easy Program
Stain-to-Match Program
Forthelatestmaterialsinformation,refertotheMaterialspagesonHermanMiller.com.
Y PriceBook
Prices effective January 6, 2020
Published April 2020
Motia® Sit-to-Stand Tables
2 Motia® Sit-to-Stand Tables Price Book (4/20) HermanMiller
Introduction
GeneralInformation
This book is effective January 6, 2020, subject to change without
notice. Products may be purchased from authorized Herman Miller deal-
ers who will quote prices upon request. For more information
about our products and services or to see a list of dealers, visit www.
HermanMiller.com.
All prices are list prices. Additional services, such as planning
services, design, storage, and installation, are not included and must
be added to these prices when the additional services are requested.
Illustrations, specifications, and prices are based on the latest
information at the time of publication. The right is reserved to make
changes at any time without notice in prices, fabrics, finishes, mate-
rials, specifications, and models, and also to discontinue models and
finishes.
Dimensions shown in the drawings are engineering drawing dimen-
sions rounded up to the nearest 1/8”. Product is shipped set
up or knocked down. Products that include “Shipped knocked down”
in the description require some assembly. If this statement does not
appear in the description, the product is shipped assembled.
Service problems are normally handled by a Herman Miller
authorized dealer. Where this cannot be accomplished on a local
level, service problems should be referred to the Customer Care
Representative for your region, Herman Miller, Inc., Zeeland, Michigan
49464.
20-DayorLess/AssignedLead-TimeShipments
All products and options in this price book not designated by an
Assigned Program icon A will ship in 20businessdaysorlessafter
being acknowledged by Herman Miller.
Products and options designated by an A are on the assigned lead-
time program and may ship in 20 days, less than 20 days, or more than
20 days from order acknowledgement.
ANoteontheOrganizationofThisBook
There are a few signals that will help you understand the organization
of this book. Once you know them, you should be able to find your way
around easily.
Likeanewspaper,thisbookisformattedwithcolumnsoftext
andillustrationsthatrunvertically.
Information wraps from one column to the next and continues for as
many pages as it needs to.
Blackbarsareclues.
A black bar at the top of a page signals the start of information about a
product.
This information is divided into two sections, each signaled by a
black bar. Product Information includes a description, additional notes,
and dimensional drawings. Specification Information, which always
begins at the top of a column, includes a series of steps. Each step rep-
resents a decision you need to make in order to complete your product
number. Steps must be followed sequentially. The number of pages
needed to complete information on a product varies; some will be
complete in one page; others may fill three or four pages. Just continue
going through the steps until you run into the next product, signaled by
the black bar at the top of the page.
Black tabs running along the outside edge of the page help you
locate what section you are in or what section you want to go to. You
can thumb forwards or backwards to find a section; tabs and text
appear on both sides of the page.
The additional pages in the back of the book include the appendices
and indices. They are signaled by a long black bar running along the
outside edge of the page.
Theindexispresentedtwoways.
The first index is in alphabetical order by product name. It can be help-
ful if you are new to the products and numbering scheme or if you are
looking for a type of product, such as work chair or round table.
The second index is by product number. It lists, in alphanumeric order,
the base product number, typically a five-digit number.
HermanMiller Motia®Sit-to-StandTablesPriceBook(4/20) 3
Motia®Sit-to-StandTables
Adjustable Height Table
Sit to Stand Table Bases
Power and Data Support
Screens
Storage
Accessories
4 Motia®Sit-to-StandTablesPriceBook(4/20) HermanMiller
==
= M
otia® Adjustable H
eight Table
HermanMiller Motia®Sit-to-StandTablesPriceBook(4/20) 5
RectangularTablewithC-Foot
Product Information
Description
Thisrectangularheight-adjustabletablehasaC-legconfigurationand
laminatetopwithsquarethermoplasticedgeoralaminatetopwith
athermoplasticbackedplywoodedge.Multipleheightadjustment
optionscomewithasimpleup/downtouchswitchorano-switchoption
forusewithLivePlatform™smartpaddlekit.Glideshave1/2"leveling
range.Shippedknockeddown.ProductisULListed.
Notes
Floortotop-of-surfaceheightadjustmentrangesare27"-46"forthe
electricstandardrange(E)option,and22"-48"fortheelectricextended
range(D)option.
Sizeslistedfortabledepthandwidtharenominal.Depthofsurface
isreduced1"forcordmanagement.Widthofsurfaceisreduced2"to
minimizepossiblepinchpointhazards.
Legsarenearlyflushwithsidesofthesurfaceformaximumknee
clearance.Kneeclearanceisequaltonominaltopwidthminus8".
Tableincludesstiffenerlocatedtowardbackoftableforincreasedleg
clearance.
SeeMotia®Sit-to-StandTablesplanningguideforadditional
informationaboutcompatibleproductssuchasscreensandwire
managers.
Foradditionaledge,finish,andcutoutoptions,seeVaryEasyProgram
inappendices.
Dimensions
Specification Information
Step1.
DV6AC A
Step2.Edge
S. squared-edgeA
Step3.Depth
24 24"deep(23"surfacesize)A
30 30"deep(29"surfacesize)A
Step4.Width
48 48"wide(46"surfacesize)A
54 54"wide(52"surfacesize)A
60 60"wide(58"surfacesize)A
66 66"wide(64"surfacesize)A
72 72"wide(70"surfacesize)A
Step5.SurfaceMaterial
L laminatetop/thermoplasticedgeA
U laminatetop/universaledgeA
Step6.TopThickness
04 11/4"thickA
Step7.Mechanism
E electricstandardrangeA
D electricextendedrangeA
Step8.LegLocation
1 legsoutbound(nosurfacemountedstorage)A
PricesforSteps1-8.
L04E1 L04D1 U04E1 U04D1
DV6ACS. 24 48 $2001 2202 2001 2202
54 $2072 2265 2072 2265
60 $2117 2306 2117 2306
66 $2180 2364 2180 2364
72 $2242 2419 2242 2419
30 48 $2123 2324 2123 2324
54 $2209 2405 2209 2405
60 $2262 2451 2262 2451
66 $2344 2528 2344 2528
72 $2423 2600 2423 2600
DV6ACS!
Mot
ia®
Adj
usta
ble
Hei
ght T
able
==
=
6 Motia®Sit-to-StandTablesPriceBook(4/20) HermanMiller
RectangularTablewithC-Footcontinued
Step9.SwitchOption
STS simpleup/downtouchswitchA +$0
SUD simpleupdown-paddleswitchA +$50
SMT noswitch-LO100A +$0
SRM digitalreadoutwithmemoryA +$160
Step10.TopFinish
76 lightbrownwalnutA +$0
8Q folkstonegreyA +$0
91 whiteA +$0
98 studiowhiteA +$0
CL coolgreyneutralA +$0
HF innertonelightA +$0
HM naturalmapleA +$0
HP lightanigreA +$0
HT innertoneA +$0
HX agedcherryA +$0
HY walnutoncherryA +$0
LA lightashA +$0
LBA clearonashA +$0
LBB oakonashA +$0
LBC walnutonashA +$0
LBD darkbrownwalnutA +$0
LBF neutraltwillA +$0
LBG sarumtwillA +$0
LBH earthentwillA +$0
LBJ graphitetwillA +$0
LBM crisplinenA +$0
LBN classiclinenA +$0
LBP casuallinenA +$0
LBQ whitetwillA +$0
LBR phantomecruA +$0
LBS phantomcocoaA +$0
LBU mediummattewalnutA +$0
LBV warmgreyteakA +$0
LT lighttoneA +$0
LU softwhiteA +$0
MT mediumtoneA +$0
OG honeymapleA +$0
WL sandstoneA +$0
WN warmgreyneutralA +$0
Step11.EdgeFinish
For laminate top/thermoplastic edge (L)
76 lightbrownwalnutA +$0
8Q folkstonegreyA +$0
8Z neutralgreyA +$0
91 whiteA +$0
98 studiowhiteA +$0
BU blackumberA +$0
CL coolgreyneutralA +$0
HF innertonelightA +$0
HM naturalmapleA +$0
HP lightanigreA +$0
HT innertoneA +$0
HX agedcherryA +$0
HY walnutoncherryA +$0
JB millworkcherryA +$0
LA lightashA +$0
LBA clearonashA +$0
LBB oakonashA +$0
LBC walnutonashA +$0
LBD darkbrownwalnutA +$0
LBF neutraltwillA +$0
LBG sarumtwillA +$0
LBH earthentwillA +$0
LBJ graphitetwillA +$0
LBK pewtermeshA +$0
LBL steelmeshA +$0
LBM crisplinenA +$0
LBN classiclinenA +$0
LBP casuallinenA +$0
LBQ whitetwillA +$0
LBR phantomecruA +$0
LBS phantomcocoaA +$0
LBU mediummattewalnutA +$0
LBV warmgreyteakA +$0
LU softwhiteA +$0
MT mediumtoneA +$0
OG honeymapleA +$0
WL sandstoneA +$0
WN warmgreyneutralA +$0
For laminate top/universal edge (U)
PLY plywoodedgeA +$50
Step12.BaseFinish
MetallicPaint
CN metallicchampagneA +$0
MS metallicsilverA +$0
==
= M
otia® Adjustable H
eight Table
HermanMiller Motia®Sit-to-StandTablesPriceBook(4/20) 7
RectangularTablewithC-Footcontinued
SandTexturePaint
BK blackA +$0
G1 graphiteA +$0
SmoothPaint
8Q folkstonegreyA +$0
91 whiteA +$0
98 studiowhiteA +$0
WL sandstoneA +$0
WN warmgreyneutralA +$0
Step13.CableTrough
For 24" deep (23" surface size) (24)
2 hingedcabletroughfor24"deepsurfaceA +$0
N nocabletroughA +$0
For 30" deep (29" surface size) (30)
3 hingedcabletroughfor30"deepsurfaceA +$0
N nocabletroughA +$0
Step14.PowerAccessCutout
NC nocutoutA +$0
Step15.Glides
57 glidesA +$0
Mot
ia®
Adj
usta
ble
Hei
ght T
able
==
=
8 Motia®Sit-to-StandTablesPriceBook(4/20) HermanMiller
RectangularTablewithT-Foot
Product Information
Description
Thisrectangularheight-adjustabletablehasaT-legconfigurationand
laminatetopwithsquarethermoplasticedgeoralaminatetopwith
athermoplasticbackedplywoodedge.Multipleheightadjustment
optionscomewithasimpleup/downtouchswitch,simpleup/down
paddleswitch,digitalreadoutwithmemory,orwithnoswitchto
accommodateaddingLivePlatform™tothetable.Glideshave1/2"
levelingrange.Shippedknockeddown.ProductisULListed.
Notes
Floortotop-of-surfaceheightadjustmentrangesare27"-46"forthe
electricstandardrange(E)option,and22"-48"fortheelectricextended
range(D)option.
Sizeslistedfortabledepthandwidtharenominal.Depthofsurface
isreduced1"forcordmanagement.Widthofsurfaceisreduced2"to
minimizepossiblepinchpointhazards.
Legsspecifiedoutbound(1)arenearlyflushwithsidesofthesurfacefor
maximumkneeclearance.Kneeclearanceisequaltonominaltopwidth
minus8".
Tableincludesstiffenerlocatedtowardbackoftableforincreasedleg
clearance.
Whenspecifyingcabletroughoption(2or3),troughfinishwillmatch
tablebasefinish.
Whenspecifyingapoweraccesscutout(RC,LC,CC),orderLogicmini
unit(Y1414.)andgrommet(Y1412.)separately.
SeeMotia®Sit-to-StandTablesplanningguideforadditional
informationaboutcompatibleproductssuchasscreensandwire
managers.
Foradditionaledge,finish,andcutoutoptions,seeVaryEasyProgram
inappendices.
Dimensions
Specification Information
Step1.
DV6AT A
Step2.Edge
S. squared-edgeA
Step3.Depth
24 24"deep(23"surfacesize)A
30 30"deep(29"surfacesize)A
36 36"deep(35"surfacesize)A
Step4.Width
For 30" deep (29" surface size) (30)
48 48"wide(46"surfacesize)A
54 54"wide(52"surfacesize)A
60 60"wide(58"surfacesize)A
66 66"wide(64"surfacesize)A
72 72"wide(70"surfacesize)A
84 84"wide(82"surfacesize)A
For 24" deep (23" surface size) (24) or 36" deep (35" surface size) (36)
48 48"wide(46"surfacesize)A
54 54"wide(52"surfacesize)A
60 60"wide(58"surfacesize)A
66 66"wide(64"surfacesize)A
72 72"wide(70"surfacesize)A
Step5.SurfaceMaterial
L laminatetop/thermoplasticedgeA
U laminatetop/universaledgeA
Step6.TopThickness
04 11/4"thickA
Step7.Mechanism
E electricstandardrangeA
D electricextendedrangeA
Step8.LegLocation
1 legsoutbound(nosurfacemountedstorage)A
DV6ATS!
==
= M
otia® Adjustable H
eight Table
HermanMiller Motia®Sit-to-StandTablesPriceBook(4/20) 9
RectangularTablewithT-Footcontinued
PricesforSteps1-8.
L04E1 L04D1 U04E1 U04D1
DV6ATS. 24 48 $2001 2202 2001 2202
54 $2072 2265 2072 2265
60 $2117 2306 2117 2306
66 $2180 2364 2180 2364
72 $2242 2419 2242 2419
30 48 $2123 2324 2123 2324
54 $2209 2405 2209 2405
60 $2262 2451 2262 2451
66 $2344 2528 2344 2528
72 $2423 2600 2423 2600
84 $2503 2673 2503 2673
36 48 $2227 2428 2227 2428
54 $2313 2508 2313 2508
60 $2365 2555 2365 2555
66 $2447 2631 2447 2631
72 $2527 2704 2527 2704
Step9.SwitchOption
STS simpleup/downtouchswitchA +$0
SUD simpleupdown-paddleswitchA +$50
SRM digitalreadoutwithmemoryA +$160
SMT noswitch-LO100A +$0
Step10.TopFinish
76 lightbrownwalnutA +$0
8Q folkstonegreyA +$0
91 whiteA +$0
98 studiowhiteA +$0
CL coolgreyneutralA +$0
HF innertonelightA +$0
HM naturalmapleA +$0
HP lightanigreA +$0
HT innertoneA +$0
HX agedcherryA +$0
HY walnutoncherryA +$0
LA lightashA +$0
LBA clearonashA +$0
LBR phantomecruA +$0
LBS phantomcocoaA +$0
LBU mediummattewalnutA +$0
LBV warmgreyteakA +$0
LBB oakonashA +$0
LBC walnutonashA +$0
LBD darkbrownwalnutA +$0
LBF neutraltwillA +$0
LBG sarumtwillA +$0
LBH earthentwillA +$0
LBJ graphitetwillA +$0
LBM crisplinenA +$0
LBN classiclinenA +$0
LBP casuallinenA +$0
LBQ whitetwillA +$0
LT lighttoneA +$0
LU softwhiteA +$0
MT mediumtoneA +$0
OG honeymapleA +$0
WL sandstoneA +$0
WN warmgreyneutralA +$0
Step11.EdgeFinish
For laminate top/thermoplastic edge (L)
76 lightbrownwalnutA +$0
8Q folkstonegreyA +$0
8Z neutralgreyA +$0
91 whiteA +$0
98 studiowhiteA +$0
BU blackumberA +$0
CL coolgreyneutralA +$0
HF innertonelightA +$0
HM naturalmapleA +$0
HP lightanigreA +$0
HT innertoneA +$0
HX agedcherryA +$0
HY walnutoncherryA +$0
JB millworkcherryA +$0
LA lightashA +$0
LBA clearonashA +$0
LBR phantomecruA +$0
LBS phantomcocoaA +$0
LBU mediummattewalnutA +$0
LBV warmgreyteakA +$0
LBB oakonashA +$0
LBC walnutonashA +$0
LBD darkbrownwalnutA +$0
LBF neutraltwillA +$0
LBG sarumtwillA +$0
LBH earthentwillA +$0
LBJ graphitetwillA +$0
LBK pewtermeshA +$0
LBL steelmeshA +$0
LBM crisplinenA +$0
Mot
ia®
Adj
usta
ble
Hei
ght T
able
==
=
10 Motia®Sit-to-StandTablesPriceBook(4/20) HermanMiller
RectangularTablewithT-Footcontinued
LBN classiclinenA +$0
LBP casuallinenA +$0
LBQ whitetwillA +$0
LU softwhiteA +$0
MT mediumtoneA +$0
OG honeymapleA +$0
WL sandstoneA +$0
WN warmgreyneutralA +$0
For laminate top/universal edge (U)
PLY plywoodedge +$50
Step12.BaseFinish
MetallicPaint
CN metallicchampagneA +$0
MS metallicsilverA +$0
SandTexturePaint
BK blackA +$0
G1 graphiteA +$0
SmoothPaint
8Q folkstonegreyA +$0
91 whiteA +$0
98 studiowhiteA +$0
WL sandstoneA +$0
WN warmgreyneutralA +$0
Step13.CableTrough
For 24" deep (23" surface size) (24)
2 hingedcabletroughfor24"deepsurfaceA +$275
N nocabletroughA +$0
For 30" deep (29" surface size) (30) or 36" deep (35" surface size) (36)
3 hingedcabletroughfor30"deepsurfaceA +$275
N nocabletroughA +$0
Step14.PowerAccessCutout
NC nocutoutA +$0
RC rightcutoutforLogicMini-Y1414andY1412A +$55
LC leftcutoutforLogicMini-Y1414andY1412A +$55
CC centercutoutforLogicMini-A +$55
Step15.Glides
57 glidesA +$0
==
= M
otia® Adjustable H
eight Table
HermanMiller Motia®Sit-to-StandTablesPriceBook(4/20) 11
ExtendedCornerTablewithC-Foot
Product Information
Description
Thisheight-adjustable90°extendedcornertablehasaC-leg
configurationandlaminatetopwithsquarethermoplasticedge.
Multipleheightadjustmentoptionscomewithasimpleup/downtouch
switchorano-switchoptionforusewithLivePlatform™smartpaddle
kit.Glideshave1/2"levelingrange.Shippedknockeddown.Productis
ULListed.
Notes
Floortotop-of-surfaceheightadjustmentrangesare27"-46"forthe
electricstandardrange(E)option,and22"-48"fortheelectricextended
range(D)option.
Sizeslistedfortabledepthandwidtharenominal.Depthofsurface
isreduced1"forcordmanagement.Widthofsurfaceisreduced2"to
minimizepossiblepinchpointhazards.
Legsarenearlyflushwithsidesofthesurfaceformaximumknee
clearance.Kneeclearanceisequaltonominaltopwidthminus8".
Tableincludesstiffenerlocatedtowardbackoftableforincreasedleg
clearance.
SeeMotia®Sit-to-StandTablesplanningguideforadditional
informationaboutcompatibleproductssuchasscreensandwire
managers.
Foradditionaledge,finish,andcutoutoptions,seeVaryEasyProgram
inappendices.
Dimensions
Specification Information
Step1.
DV6EC A
Step2.Edge
S. squared-edgeA
Step3.Depth
24 24"deep(23"surfacesize)A
30 30"deep(29"surfacesize)A
Step4.Width
4260 42"wideleftx60"wideright(40"x58"surfacesize)A
4272 42"wideleftx72"wideright(40"x70"surfacesize)A
4860 48"wideleftx60"wideright(46"x58"surfacesize)A
4872 48"wideleftx72"wideright(46"x70"surfacesize)A
5454 54"wideleftx54"wideright(52"x52"surfacesize)A
6042 60"wideleftx42"wideright(58"x40"surfacesize)A
6048 60"wideleftx48"wideright(58"x46"surfacesize)A
6060 60"wideleftx60"wideright(58"x58"surfacesize)A
7242 72"wideleftx42"wideright(70"x40"surfacesize)A
7248 72"wideleftx48"wideright(70"x46"surfacesize)A
Step5.SurfaceMaterial
L laminatetop/thermoplasticedgeA
Step6.Mechanism
E electricstandardrangeA
D electricextendedrangeA
PricesforSteps1-6.
LE LD
DV6ECS. 24 4260 $3560 3920
4272 $3620 4024
4860 $3726 4130
4872 $3816 4225
5454 $3810 3861
6042 $3560 3920
6048 $3726 4130
6060 $3913 3966
7242 $3620 4024
7248 $3816 4225
DV6ECS!
Mot
ia®
Adj
usta
ble
Hei
ght T
able
==
=
12 Motia®Sit-to-StandTablesPriceBook(4/20) HermanMiller
ExtendedCornerTablewithC-Footcontinued
30 4260 $3694 4150
4272 $3799 4261
4860 $3902 4375
4872 $3998 4492
5454 $4158 4351
6042 $3694 4150
6048 $3902 4375
6060 $4273 4470
7242 $3799 4261
7248 $3998 4492
Step7.SwitchOption
STS simpleup/downtouchswitchA +$0
SMT noswitch-LO100A +$0
Step8.TopFinish
76 lightbrownwalnutA +$0
8Q folkstonegreyA +$0
91 whiteA +$0
98 studiowhiteA +$0
CL coolgreyneutralA +$0
HF innertonelightA +$0
HM naturalmapleA +$0
HP lightanigreA +$0
HT innertoneA +$0
HX agedcherryA +$0
HY walnutoncherryA +$0
LA lightashA +$0
LBA clearonashA +$0
LBB oakonashA +$0
LBC walnutonashA +$0
LBD darkbrownwalnutA +$0
LBF neutraltwillA +$0
LBG sarumtwillA +$0
LBH earthentwillA +$0
LBJ graphitetwillA +$0
LBM crisplinenA +$0
LBN classiclinenA +$0
LBP casuallinenA +$0
LBQ whitetwillA +$0
LBR phantomecruA +$0
LBS phantomcocoaA +$0
LBU mediummattewalnutA +$0
LBV warmgreyteakA +$0
LT lighttoneA +$0
LU softwhiteA +$0
MT mediumtoneA +$0
OG honeymapleA +$0
WL sandstoneA +$0
WN warmgreyneutralA +$0
Step9.EdgeFinish
76 lightbrownwalnutA +$0
8Q folkstonegreyA +$0
8Z neutralgreyA +$0
91 whiteA +$0
98 studiowhiteA +$0
BU blackumberA +$0
CL coolgreyneutralA +$0
HF innertonelightA +$0
HM naturalmapleA +$0
HP lightanigreA +$0
HT innertoneA +$0
HX agedcherryA +$0
HY walnutoncherryA +$0
JB millworkcherryA +$0
LA lightashA +$0
LBA clearonashA +$0
LBB oakonashA +$0
LBC walnutonashA +$0
LBD darkbrownwalnutA +$0
LBF neutraltwillA +$0
LBG sarumtwillA +$0
LBH earthentwillA +$0
LBJ graphitetwillA +$0
LBK pewtermeshA +$0
LBL steelmeshA +$0
LBM crisplinenA +$0
LBN classiclinenA +$0
LBP casuallinenA +$0
LBQ whitetwillA +$0
LBR phantomecruA +$0
LBS phantomcocoaA +$0
LBU mediummattewalnutA +$0
LBV warmgreyteakA +$0
LU softwhiteA +$0
MT mediumtoneA +$0
OG honeymapleA +$0
WL sandstoneA +$0
WN warmgreyneutralA +$0
==
= M
otia® Adjustable H
eight Table
HermanMiller Motia®Sit-to-StandTablesPriceBook(4/20) 13
ExtendedCornerTablewithC-Footcontinued
Step10.BaseFinish
MetallicPaint
CN metallicchampagneA +$0
MS metallicsilverA +$0
SandTexturePaint
BK blackA +$0
G1 graphiteA +$0
SmoothPaint
8Q folkstonegreyA +$0
91 whiteA +$0
98 studiowhiteA +$0
WL sandstoneA +$0
WN warmgreyneutralA +$0
Step11.Glides
57 glidesA +$0
Mot
ia®
Adj
usta
ble
Hei
ght T
able
==
=
14 Motia®Sit-to-StandTablesPriceBook(4/20) HermanMiller
Motia®Vista™RectangularTablewithT-Foot
Product Information
Description
ThisrectangularheightadjustabletablehasaT-legconfiguration
andlaminatetopwithsquarethermoplasticedge,laminatetopwith
thermoplasticbackedplywoodedgeorveneertopandedge.Multiple
heightadjustmentoptionscomewithasimpleup/downtouchswitch,
simpleup/downpaddleswitchorwithnoswitchtoaccommodate
addingLivePlatform™tothetable.Glideshave1/2"levelingrange.Work
surfacestiffenerincluded.Shippedknockeddown.ProductisULListed.
Notes
Floortotop-of-surfaceheightadjustmentrangesare27"-46"forthe
electricstandardrange(E)option,and22"-48"fortheelectricextended
range(D)option.
Sizeslistedfortabledepthandwidtharenominal.Depthofsurfaceis
reducedby1"forcordmanagement.Widthofsurfaceisreduced2"to
minimizepossiblepinchpointhazards.
Whennounder-surfacemountedstorage(L2SCF.,L2SDF.)isused,
specifylegsoutbound(1)location.
Touseunder-surfacemountedstorage(L2SCF.,L2SDF.)onbothends
ofthesurface,specifylegsinboundforundersurfacestorageonboth
ends(2)location.
Touseunder-surfacemountedstorage(L2SCF.,L2SDF.)ontheright-or
left-handendofthesurface,specifylegsinboundforundersurface
storageonleftorrightend(3)location.Thiswillmakethetablehanded.
Surfacewillcomewithinboundlegholes;theoutboundlegholeswill
needtobefielddrilled.
Whenspecifyingcabletrough(2,3),troughfinishwillmatchtablebase
finish.
Whenspecifyingapoweraccesscutout(RC,LC,CC),LogicMiniunit
(Y1414.)andgrommet(Y1412.)mustbeorderedseparately.
Whenspecifyinga24"D×54"Wtablewithlegsinboundforunder
surfacestorageonbothends(2)option,thehingedcabletroughoption
isnotavailable.Itisrecommendedtousethe(Y1200.48N)cabletrough,
orderedseparately.
Orderworksurfacestiffener(FV696.)separately.
Orderthefollowingoptionalproductsseparately:
•Vistamodesty+privacyscreen-doublesided,heightadjustabletable
(Y1130.)
•Vistamodestyscreen-doublesided,heightadjustabletable(Y1131.)
•Suspendedcubby(L2SCF.)
•Suspendeddrawer(L2SDF.)
Foradditionalplanninginformation,seeplanningguide.
Foradditionalproductoptions,seeVaryEasyPrograminappendices.
Dimensions
DV6GTS!
==
= M
otia® Adjustable H
eight Table
HermanMiller Motia®Sit-to-StandTablesPriceBook(4/20) 15
Motia®Vista™RectangularTablewithT-Footcontinued
Specification Information
Step1.
DV6GT A
Step2.Edge
S. squared-edgeA
Step3.Depth
24 24"deep(23"surfacesize)A
30 30"deep(29"surfacesize)A
Step4.Width
48 48"wide(46"surfacesize)A
54 54"wide(52"surfacesize)A
60 60"wide(58"surfacesize)A
66 66"wide(64"surfacesize)A
72 72"wide(70"surfacesize)A
Step5.SurfaceMaterial
L laminatetop/thermoplasticedgeA
U laminatetop/universaledgeA
W veneertop/veneeredgeA
Step6.TopThickness
04 11/4"thickA
08 11/8"thickA
Step7.Mechanism
D electricextendedrangeA
E electricstandardrangeA
Step8.LegLocation
For 48" wide (46" surface size) (48) with electric extended range (D) or
electric standard range (E)
1 legsoutbound(nosurfacemountedstorage)A
For 54" wide (52" surface size) (54), 60" wide (58" surface size) (60),
66" wide (64" surface size) (66), or 72" wide (70" surface size) (72) with
electric standard range (E)
1 legsoutbound(nosurfacemountedstorage)A
2 legsinbound(forundersurfacestorageonbothends)A
3 legsinbound(forundersurfacestorageonleftorrightend)A
For 54" wide (52" surface size) (54), 60" wide (58" surface size) (60),
66" wide (64" surface size) (66), or 72" wide (70" surface size) (72) with
electric extended range (D)
1 legsoutbound(nosurfacemountedstorage)A
PricesforSteps1-8.
L04D1 L04E1 L04E2 L04E3 L08D1 L08E1
DV6GTS. 24 48 $2498 2315 — — 2556 2373
54 $2565 2382 2382 2382 2624 2441
60 $2611 2427 2427 2427 2669 2486
66 $2672 2489 2489 2489 2730 2547
72 $2731 2548 2548 2548 2790 2606
30 48 $2510 2327 — — 2569 2385
54 $2593 2410 2410 2410 2651 2468
60 $2645 2462 2462 2462 2704 2520
66 $2725 2541 2541 2541 2784 2599
72 $2801 2618 2618 2618 2859 2676
L08E2 L08E3 U04D1 U04E1 U04E2 U04E3
DV6GTS. 24 48 — — $2498 2315 — —
54 $2441 2441 2565 2382 2382 2382
60 $2486 2486 2611 2427 2427 2427
66 $2547 2547 2672 2489 2489 2489
72 $2606 2606 2731 2548 2548 2548
30 48 — — $2510 2327 — —
54 $2468 2468 2593 2410 2410 2410
60 $2520 2520 2645 2462 2462 2462
66 $2599 2599 2725 2541 2541 2541
72 $2676 2676 2801 2618 2618 2618
U08D1 U08E1 U08E2 U08E3 W04D1 W04E1
DV6GTS. 24 48 $2556 2373 — — 2872 2687
54 $2624 2441 2441 2441 2985 2802
60 $2669 2486 2486 2486 3083 2898
66 $2730 2547 2547 2547 3198 3014
72 $2790 2606 2606 2606 3293 3109
30 48 $2569 2385 — — 2976 2793
54 $2651 2468 2468 2468 3116 2933
60 $2704 2520 2520 2520 3243 3060
66 $2784 2599 2599 2599 3391 3208
72 $2859 2676 2676 2676 3514 3330
Mot
ia®
Adj
usta
ble
Hei
ght T
able
==
=
16 Motia®Sit-to-StandTablesPriceBook(4/20) HermanMiller
Motia®Vista™RectangularTablewithT-Footcontinued
W04E2 W04E3 W08D1 W08E1 W08E2 W08E3
DV6GTS. 24 48 — — $2930 2746 — —
54 $2802 2802 3044 2860 2860 2860
60 $2898 2898 3141 2957 2957 2957
66 $3014 3014 3257 3072 3072 3072
72 $3109 3109 3351 3168 3168 3168
30 48 — — $3035 2851 — —
54 $2933 2933 3175 2991 2991 2991
60 $3060 3060 3302 3118 3118 3118
66 $3208 3208 3449 3266 3266 3266
72 $3330 3330 3572 3389 3389 3389
Step9.SwitchOption
STS simpleup/down-touchswitchA +$0
SUD simpleupdown-paddleswitchA +$50
SMT noswitch-LO100A +$0
Step10.
TopFinish
For laminate top/thermoplastic edge (L) or laminate top/universal edge
(U)
76 lightbrownwalnutA +$0
8Q folkstonegreyA +$0
91 whiteA +$0
98 studiowhiteA +$0
CL coolgreyneutralA +$0
HF innertonelightA +$0
HM naturalmapleA +$0
HP lightanigreA +$0
HT innertoneA +$0
HX agedcherryA +$0
HY walnutoncherryA +$0
LA lightashA +$0
LBA clearonashA +$0
LBB oakonashA +$0
LBC walnutonashA +$0
LBD darkbrownwalnutA +$0
LBF neutraltwillA +$0
LBG sarumtwillA +$0
LBH earthentwillA +$0
LBJ graphitetwillA +$0
LBM crisplinenA +$0
LBN classiclinenA +$0
LBP casuallinenA +$0
LBQ whitetwillA +$0
LBR phantomecruA +$0
LBS phantomcocoaA +$0
LBU mediummattewalnutA +$0
LBV warmgreyteakA +$0
LT lighttoneA +$0
LU softwhiteA +$0
MT mediumtoneA +$0
WL sandstoneA +$0
WN warmgreyneutralA +$0
TopFinish
For laminate top/thermoplastic edge (L) or laminate top/universal edge
(U)
OG honeymapleA +$0
==
= M
otia® Adjustable H
eight Table
HermanMiller Motia®Sit-to-StandTablesPriceBook(4/20) 17
Motia®Vista™RectangularTablewithT-Footcontinued
Top/EdgeFinish
For veneer top/veneer edge (W)
2U lightbrownwalnutA +$85
40 darkbrownwalnutA +$85
ED agedcherryA +$85
EK mediumredwalnutA +$85
ET clearonashA +$85
EU oakonashA +$85
EV walnutonashA +$85
EW mediummattewalnutA +$85
UL naturalmapleA +$85
UX walnutoncherryA +$85
Step11.EdgeFinish
For laminate top/thermoplastic edge (L)
76 lightbrownwalnutA +$0
8Q folkstonegreyA +$0
91 whiteA +$0
98 studiowhiteA +$0
BU blackumberA +$0
CL coolgreyneutralA +$0
HF innertonelightA +$0
HM naturalmapleA +$0
HP lightanigreA +$0
HT innertoneA +$0
HX agedcherryA +$0
HY walnutoncherryA +$0
LA lightashA +$0
LBA clearonashA +$0
LBB oakonashA +$0
LBC walnutonashA +$0
LBD darkbrownwalnutA +$0
LBF neutraltwillA +$0
LBG sarumtwillA +$0
LBH earthentwillA +$0
LBJ graphitetwillA +$0
LBK pewtermeshA +$0
LBL steelmeshA +$0
LBM crisplinenA +$0
LBN classiclinenA +$0
LBP casuallinenA +$0
LBQ whitetwillA +$0
LBR phantomecruA +$0
LBS phantomcocoaA +$0
LBU mediummattewalnutA +$0
LBV warmgreyteakA +$0
LU softwhiteA +$0
MT mediumtoneA +$0
WL sandstoneA +$0
WN warmgreyneutralA +$0
For laminate top/thermoplastic edge (L)
OG honeymapleA +$0
For laminate top/universal edge (U)
PLY plywoodedgeA +$50
Step12.BaseFinish
SmoothPaint
8Q folkstonegreyA +$0
91 whiteA +$0
98 studiowhiteA +$0
CL coolgreyneutralA +$0
WL sandstoneA +$0
WN warmgreyneutralA +$0
MetallicPaint
CN metallicchampagneA +$0
EH metallicbronzeA +$0
MS metallicsilverA +$0
SandTexturePaint
BK blackA +$0
G1 graphiteA +$0
Step13.CableTrough
For 24" deep (23" surface size) (24), legs outbound (no surface
mounted storage) (1) AND legs inbound (for under surface storage on
left or right end) (3)
2 hingedcabletroughfor24"deepsurfaceA +$275
N nocabletroughA +$0
For 30" deep (29" surface size) (30) with 48" wide (46" surface size)
(48), 54" wide (52" surface size) (54), 60" wide (58" surface size) (60),
or 66" wide (64" surface size) (66), or 72" wide (70" surface size) (72)
3 hingedcabletroughfor30"deepsurfaceA +$296
N nocabletroughA +$0
For 24" deep (23" surface size) (24) with 54" wide (52" surface size)
(54) with legs inbound (for under surface storage on both ends) (2)
N nocabletroughA +$0
Mot
ia®
Adj
usta
ble
Hei
ght T
able
==
=
18 Motia®Sit-to-StandTablesPriceBook(4/20) HermanMiller
Motia®Vista™RectangularTablewithT-Footcontinued
Step14.PowerAccessCutout
CC centercutoutforLogicMini-A +$55
LC leftcutoutforLogicMini-Y1414andY1412A +$55
NC nocutoutA +$0
RC rightcutoutforLogicMini-Y1414andY1412A +$55
Step15.Glides
57 glidesA +$0
==
==
==
Motia® S
it to Stand Table B
ases
HermanMiller Motia®Sit-to-StandTablesPriceBook(4/20) 19
HeightAdjustableBaseKitwithT-Foot
Product Information
Description
Thisindependent2-legkitconvertsexistingworksurfacesintoheight
adjustabletables.Legscomein2depthsandmultiplewidthswitha
choiceofswitchtypeorwithnoswitchtoaccommodateaddingLive
Platform™tothetable.Glideshave1/2"oflevelingrange.Shipped
knockeddown.ProductisULRecognized.
Notes
Withstandard11/8"thickworksurface,floortotop-of-surfaceheight
adjustmentrangesare27"-46"fortheelectricstandardrange(E)option,
and22"-48"fortheelectricextendedrange(D)option.
Sizeslistedforfootdepthandbasewidtharenominal.Depthoffootis
reduced1"forcordmanagementwhenpairedwithequaldepthwork
surface.Widthofbaseisreduced2"tominimizepossiblepinchpoint
hazardswhenpairedwithequalwidthworksurface.
Orderworksurfacestiffener(FV696.)separately.
SeeMotia®Sit-to-StandTablesplanningguideforproperinstallationof
legkitanddesigninformation.
Dimensions
Specification Information
Step1.
DV7AT. A
Step2.Depth
24 24"deep(23"surfacesize)A
30 30"deep(29"surfacesize)A
36 36"deep(35"surfacesize)A
Step3.Mechanism
E electricstandardrangeA
D electricextendedrangeA
Step4.LegLocation
1 legsoutbound(nosurfacemountedstorage)A
PricesforSteps1-4.
1
DV7AT. 24 E $1751
D $1951
30 E $1784
D $1985
36 E $1690
D $1880
Step5.SwitchOption
STS simpleup/downtouchswitchA +$0
SUD simpleupdown-paddleswitchA +$50
SRM digitalreadoutwithmemoryA +$160
SMT noswitch-LO100A +$0
Step6.Leg/FootFinish
MetallicPaint
CN metallicchampagnelegwithmetallicchampagnefootA +$0
MS metallicsilverlegwithmetallicsilverfootA +$0
SandTexturePaint
BK blacklegwithblackfootA +$0
G1 graphitelegwithgraphitefootA +$0
SmoothPaint
8Q folkstonegreylegwithfolkstonegreyfootA +$0
91 whitelegwithwhitefootA +$0
98 studiowhitelegwithstudiowhitefootA +$0
WL sandstonelegwithsandstonefootA +$0
WN warmgreyneutrallegwithwarmgreyneutralfootA +$0
DV7AT.
Mot
ia®
Sit
to S
tand
Tab
le B
ases
==
==
==
20 Motia®Sit-to-StandTablesPriceBook(4/20) HermanMiller
HeightAdjustableBaseKitwithT-Footcontinued
Step7.Glides
57 glidesA +$0
==
==
==
Motia® S
it to Stand Table B
ases
HermanMiller Motia®Sit-to-StandTablesPriceBook(4/20) 21
C-Foot3LegBaseKit
Product Information
Description
Thisindependent3-legkitconvertsexistingworksurfacesintoheight
adjustabletables.Legscomein2depthsandmultiplewidthswitha
simpleup/downtouchswitchorano-switchoptionforusewithLive
Platform™smartpaddlekit.Glideshave1/2"oflevelingrange.Shipped
knockeddown.ProductisULRecognized.
Notes
Withstandard11/8"thickworksurface,floortotop-of-surfaceheight
adjustmentrangesare27"-46"fortheelectricstandardrange(E)option,
and22"-48"fortheelectricextendedrange(D)option.
Sizeslistedforfootdepthandbasewidtharenominal.Depthoffootis
reduced1"forcordmanagementwhenpairedwithequaldepthwork
surface.Widthofbaseisreduced2"tominimizepossiblepinchpoint
hazardswhenpairedwithequalwidthworksurface.
Orderworksurfacestiffener(FV696.)separately.
SeeMotia®Sit-to-StandTablesplanningguideforproperinstallationof
legkitanddesigninformation.
Dimensions
DV7FC.
Mot
ia®
Sit
to S
tand
Tab
le B
ases
==
==
==
22 Motia®Sit-to-StandTablesPriceBook(4/20) HermanMiller
C-Foot3LegBaseKitcontinued
Specification Information
Step1.
DV7FC. A
Step2.Depth
24 24"deep(23"surfacesize)A
30 30"deep(29"surfacesize)A
Step3.Mechanism
E electricstandardrangeA
D electricextendedrangeA
PricesforSteps1-3.
E D
DV7FC. 24 $2952 3279
30 $2952 3279
Step4.SwitchOption
SRM digitalreadoutwithmemoryA +$160
SUD simpleupdown-paddleswitchA +$50
STS simpleup/downtouchswitchA +$0
SMT noswitch-LO100A +$0
Step5.BaseFinish
MetallicPaint
CN metallicchampagneA +$0
MS metallicsilverA +$0
SandTexturePaint
BK blackA +$0
G1 graphiteA +$0
SmoothPaint
8Q folkstonegreyA +$0
91 whiteA +$0
98 studiowhiteA +$0
WL sandstoneA +$0
WN warmgreyneutralA +$0
Step6.Glides
57 glidesA +$0
==
==
==
Motia® S
it to Stand Table B
ases
HermanMiller Motia®Sit-to-StandTablesPriceBook(4/20) 23
HeightAdjustableBaseKitwithC-Foot
Product Information
Description
Thisindependent2-legkitconvertsexistingworksurfacesintoheight
adjustabletables.Legscomein2depthsandmultiplewidthswitha
simpleup/downtouchswitchorano-switchoptionforusewithLive
Platform™smartpaddlekit.Glideshave1/2"oflevelingrange.Shipped
knockeddown.ProductisULRecognized.
Notes
Withstandard11/8"thickworksurface,floortotop-of-surfaceheight
adjustmentrangesare27"-46"fortheelectricstandardrange(E)option,
and22"-48"fortheelectricextendedrange(D)option.
Sizeslistedforfootdepthandbasewidtharenominal.Depthoffootis
reduced1"forcordmanagementwhenpairedwithequaldepthwork
surface.Widthofbaseisreduced2"tominimizepossiblepinchpoint
hazardswhenpairedwithequalwidthworksurface.
Orderworksurfacestiffener(FV696.)separately.
SeeMotia®Sit-to-StandTablesplanningguideforproperinstallationof
legkitanddesigninformation.
Dimensions
Specification Information
Step1.
DV7AC. A
Step2.Depth
24 24"deep(23"surfacesize)A
30 30"deep(29"surfacesize)A
Step3.Mechanism
E electricstandardrangeA
D electricextendedrangeA
Step4.LegLocation
1 legsoutbound(nosurfacemountedstorage)A
PricesforSteps1-4.
1
DV7AC. 24 E $1785
D $1956
30 E $1788
D $1985
Step5.SwitchOption
SRM digitalreadoutwithmemoryA +$160
SUD simpleupdown-paddleswitchA +$50
STS simpleup/downtouchswitchA +$0
SMT noswitch-LO100A +$0
Step6.Leg/FootFinish
MetallicPaint
CN metallicchampagnelegwithmetallicchampagnefootA +$0
MS metallicsilverlegwithmetallicsilverfootA +$0
SandTexturePaint
BK blacklegwithblackfootA +$0
G1 graphitelegwithgraphitefootA +$0
SmoothPaint
8Q folkstonegreylegwithfolkstonegreyfootA +$0
91 whitelegwithwhitefootA +$0
98 studiowhitelegwithstudiowhitefootA +$0
WL sandstonelegwithsandstonefootA +$0
WN warmgreyneutrallegwithwarmgreyneutralfootA +$0
DV7AC.
Mot
ia®
Sit
to S
tand
Tab
le B
ases
==
==
==
24 Motia®Sit-to-StandTablesPriceBook(4/20) HermanMiller
HeightAdjustableBaseKitwithC-Footcontinued
Step7.Glides
57 glidesA +$0
==
==
==
Motia® S
it to Stand Table B
ases
HermanMiller Motia®Sit-to-StandTablesPriceBook(4/20) 25
Motia®Vista™AdjustableBaseKitwithT-Foot
Product Information
Description
Thisindependent2-legkitconvertsexistingworksurfacesintoheight
adjustabletables.Legscomein2depthsandmultiplewidthswith
achoiceofswitchtype.Glideshave1/2"oflevelingrange.Shipped
knockeddown.ProductisULRecognized.
Notes
Withstandard11/8"thickworksurface,floortotop-of-surfaceheight
adjustmentrangesare27"-46"fortheelectricstandardrange(E)option,
and22"-48"fortheelectricextendedrange(D)option.
Sizeslistedforfootdepthandbasewidtharenominal.Depthoffootis
reduced1"forcordmanagementwhenpairedwithequaldepthwork
surface.Widthofbaseisreduced2"tominimizepossiblepinchpoint
hazardswhenpairedwithequalwidthworksurface.
ToaccommodateaddingLivePlatform™tothetable,specifynoswitch-
LO100(SMT)option.
Forproperinstallationoflegkitanddesigninformation,seeplanning
guide.
Dimensions
Specification Information
Step1.
DV7GT. A
Step2.Depth
24 24"deep(23"surfacesize)A
30 30"deep(29"surfacesize)A
Step3.Mechanism
D electricextendedrangeA
E electricstandardrangeA
Step4.LegLocation
1 legsoutbound(nosurfacemountedstorage)A
PricesforSteps1-4.
1
DV7GT. 24 D $2235
E $2051
30 D $2166
E $1983
Step5.SwitchOption
STS simpleup/downtouchswitchA +$0
SMT noswitch-LO100A +$0
SUD simpleupdown-paddleswitchA +$50
SRM digitalreadoutwithmemoryA +$160
Step6.Leg/FootFinish
SmoothPaint
8Q folkstonegreyA +$0
91 whiteA +$0
98 studiowhiteA +$0
CL coolgreyneutralA +$0
WL sandstoneA +$0
WN warmgreyneutralA +$0
MetallicPaint
CN metallicchampagneA +$0
EH metallicbronzeA +$0
MS metallicsilverA +$0
SandTexturePaint
BK blackA +$0
G1 graphiteA +$0
DV7GT.
Mot
ia®
Sit
to S
tand
Tab
le B
ases
==
==
==
26 Motia®Sit-to-StandTablesPriceBook(4/20) HermanMiller
Motia®Vista™AdjustableBaseKitwithT-Footcontinued
Step7.Glides
57 glidesA +$0
==
==
==
==
= M
otia® Pow
er and Data S
upport
HermanMiller Motia®Sit-to-StandTablesPriceBook(4/20) 27
ExternalCableManager
Product Information
Description
Thiscablemanagerseamlesslyroutescablesfromthecentraltrough
ofheightadjustablebenching(Renew™LinkorNevi™Link)uptothe
worksurfaceasthesurfacemovesupanddown.1lengthfitsallleg
mechanismtypes.Installationhardwareincluded.
Dimensions
Specification Information
Step1.
DU11
Step2.Attachment
B. highdensitytroughattachement
S. worksurfaceattachement
PricesforSteps1-2.
DU11B. $204
DU11S. $204
Step3.Finish
PriceCategory5 +$0
DU11B. DU11S.
Mot
ia®
Pow
er a
nd D
ata
Sup
port
==
==
==
==
=
28 Motia®Sit-to-StandTablesPriceBook(4/20) HermanMiller
LogicMini
Product Information
Description
Thiselectricaldistributorplugsdirectlyintofloor,wall,orceiling
dropoutlets.Eachmoduleconfigurationpresentsthesamevisual
appearance.Cableclipsandattachmenthardwareincluded.Productis
ULlisted.
Notes
Cableclipsforcordmanagementareintendedfora1-timeinstallation.
Clampversionscanbereorientedinthefieldbyatechnician.
AsmallLEDlightilluminatesthroughtheUSBportswhentheUSB
versionispluggedinandpowered.
USBportsprovide10-wattpowertochargemostdevicesandtabletsat
fullspeed.
Cordcolorispredetermined.Forwhite(91)finishcordswillbewhite.For
graphite(G1)finishcordswillbeblack.
Grommetmountattachment(Y1414.xxxG)doesnotcomewiththemini
grommet.OrderLogicminigrommet(Y1412.)separately,asneeded.
Dimensions
Y1414.
==
==
==
==
= M
otia® Pow
er and Data S
upport
HermanMiller Motia®Sit-to-StandTablesPriceBook(4/20) 29
LogicMinicontinued
Specification Information
Step1.
Y1414. A
Step2.Configuration
J 1simplexreceptacles,2poweredUSBA
K 2simplexreceptaclesA
Step3.Cord/ConduitLength
03 3'cord/conduitA
06 6'cord/conduitA
10 10'cord/conduitA
Step4.Attachment
G grommetmountA
S surfaceclampA
PricesforSteps1-4.
G S
Y1414. J 03 $364 364
06 $364 364
10 $374 374
K 03 $203 203
06 $203 203
10 $214 214
Step5.Finish
BK blackA +$0
91 whiteA +$0
98 studiowhiteA +$0
G1 graphiteA +$0
Mot
ia®
Pow
er a
nd D
ata
Sup
port
==
==
==
==
=
30 Motia®Sit-to-StandTablesPriceBook(4/20) HermanMiller
LogicMiniGrommet
Product Information
Description
ThisLogicPowerAccessSolutions™plasticgrommetisavailableinmini
rectangleorminisquareconfiguration.Theintegratedflapscanhidethe
thingsbelowthesurfacewhilealsoretainingpoweranddatacords.
Notes
ThisgrommetisinstalledinsomeHermanMillerapplications.Verify
yourapplicationbeforeorderinggrommetseparately.
Dimensions
Specification Information
Step1.
Y1412.
Step2.Configuration
1 minirectanglegrommet
2 minisquaregrommet
PricesforSteps1-2.
Y1412. 1 $29
2 $33
Step3.Finish
91 white +$0
98 studiowhite +$0
BK black +$0
G1 graphite +$0
Y1412.
==
==
==
==
= M
otia® Pow
er and Data S
upport
HermanMiller Motia®Sit-to-StandTablesPriceBook(4/20) 31
PowerPlugStrip
Product Information
Description
Thiscordedpowerstripprovides6outlets.Itisavailablewith6'and10'
cordlengths.PowerstripisULListedandCSACertified.Finishisblack.
Notes
The10'cord(10)lengthisrecommendedforusewithheightadjustable
table.
WhenusedwithCanvasVista™,powerstripplugsdirectlyintothe
harnesswithpower+datacover(FG150.)locatedunderthechase.
Orderthefollowingproductsseparately:
•Hingedcabletrough(Y1300.)
•Vistaharnesswithpower+datacover(FG150.)
Dimensions
Specification Information
Step1.
Y1500.
Step2.Configuration
6 6ACoutlets
Step3.CordLength
06 6'long
10 10'long
PricesforSteps1-3.
06 10
Y1500. 6 $70 81
Y1500.
Mot
ia®
Pow
er a
nd D
ata
Sup
port
==
==
==
==
=
32 Motia®Sit-to-StandTablesPriceBook(4/20) HermanMiller
HingedCableTrough
Product Information
Description
Thissheetmetaltroughisastand-alonecablemanagementtraythat
mountstotheundersideofaworksurfacetoholdandconcealcords
andcables.ItcanbeusedwithaLogicMiniunitforcordstorageorused
alonewithcordsroutedthroughtheendsofthetrough.Troughholds
cordsinplacewhenopen.
Notes
Powerstrip(Y1500.)isintendedtobehousedinsidethetroughfor
additionalpoweraccess.
HingedcabletroughworksbestwithaMotia®Vista™heightadjustable
table(DV6GT.).Canbeusedonanyotherworksurfacethathasthe
clearancefortheoveralldimensionslistedbelow.
Whenspecifyinga24"D×54"Wtablewithlegsinboundforunder
surfacestorageonbothends(2)option,thehingedcabletroughoption
isnotavailable.Itisrecommendedtousethe(Y1200.48N)cabletrough,
orderedseparately.
Orderthefollowingproductsseparately:
•Powerstrip(Y1500.)
•LogicMini(Y1414.,Y1412.)
Dimensions
Specification Information
Step1.
Y1300. A
Step2.WorkSurfaceDepth
24 forusewith24"deepworksurfaceA
30 forusewith30"deepworksurfaceA
PricesforSteps1-2.
Y1300. 24 $196
30 $213
Step3.Finish
SmoothPaint
8Q folkstonegreyA +$0
91 whiteA +$0
98 studiowhiteA +$0
CL coolgreyneutralA +$0
WL sandstoneA +$0
WN warmgreyneutralA +$0
SandTexturePaint
BK blackA +$0
G1 graphiteA +$0
MetallicPaint
CN metallicchampagneA +$0
EH metallicbronzeA +$0
MS metallicsilverA +$0
Y1300.
==
==
==
==
= M
otia® Pow
er and Data S
upport
HermanMiller Motia®Sit-to-StandTablesPriceBook(4/20) 33
Height-AdjustableVerticalCableManager
Product Information
Description
Thiscablemanagerorganizescordsfromthepowersourcetothe
undersideofaworksurfaceonheight-adjustableproducts.Itattaches
withmagnetstotheheight-adjustablelegcolumnandthemeshsleeve
travelsupanddownwiththeworksurface.Cablemanageriscompatible
withallheight-adjustablelegcolumns.Installationhardwareincluded.
Dimensions
Specification Information
Step1.
DU15
Step2.Attachment
B. cabletrayattachment
S. worksurfaceattachment
Step3.TableMechanism
D electricextendedrange
E electricstandardrange
PricesforSteps1-3.
DU15B. D $125
E $125
DU15S. D $130
E $130
Step4.Finish
MS metallicsilver +$0
BK black +$0
91 white +$0
DU15B. DU15S.
Mot
ia®
Scr
eens
==
==
==
==
==
==
34 Motia®Sit-to-StandTablesPriceBook(4/20) HermanMiller
PariScreen,HeightAdjustableTables
Product Information
Description
Thisscreenattachestoanindividualheightadjustableworksurface.It
hasanall-fabric,tackablesurfacewithframelessdesign,andcomesin
privacyandmodestysizes.Attachmenthardwareincluded.
Notes
Privacyandmodestypanelactualwidthis2"lessthanspecifiedwidth.
Privacyscreen(A)topedgealignswiththe42"highCanvasdatumline;
bottomedgeis4"belowworksurface.
Privacy&modestyscreen(B)topedgealignswiththe42"highCanvas
datumline;bottomedgeis10"belowworksurface.
Privacyscreen(C)topedgealignswiththe46"highCanvasdatumline;
bottomedgeis4"belowworksurface.
Privacy&modestyscreen(D)topedgealignswiththe46"highCanvas
datumline;bottomedgeis10"belowworksurface.
Privacyscreen(E)topedgealignswiththe53"highCanvasdatumline;
bottomedgeis4"belowworksurface.
Privacy&modestyscreen(F)topedgealignswiththe53"highCanvas
datumline;bottomedgeis10"belowworksurface.
Screens54"wideandwiderincludeanadditional1"-widecenter
mountingbracket.
Recommendedmountingcreatesa1"gapbetweenbackedgeofsurface
andthescreentoaccommodatecableroutingandtheattachmentor
clamp-mountingofotherhardwaretothesurface.
Optionalcablemanagementtroughisonlyavailablewhenspecifying
privacy&modestyheightoption(B).Troughfinishisgraphite.
Attachmentbracketsareinsetfromedgeofscreenbyapproximately8"
andrequire21/2"ofworksurfaceforattachment.
Attachmentbracketfinishispaintedgraphite.
ScreenacceptsCustomer’sOwnMaterial(COM).Yardageisestimated
fornondirectional54"-widefabrics.
Forverticalfabricdirection(T):
Height—Yardage
A—1.51
B—1.89
C—1.76
D—2.14
E—2.21
F—2.58
Forhorizontalfabricdirection(R):
Width—Yardage
ForheightsA/B:
24—0.88
30—1.07
36—1.26
42—1.45
48—1.64
54—1.83
60—2.02
66—2.21
72—2.39
ForheightsC/D/E/F:
24—1.76
30—2.14
36—2.52
42—2.90
48—3.28
54—3.65
60—4.03
66—4.41
72—4.79
Forinformationonmultiplequantitiesordirectionalfabrics,contact
COMDepartment.SeeOrderInformationinAppendices.
Dimensions
Y1116.
==
==
==
==
==
==
Motia® S
creens
HermanMiller Motia®Sit-to-StandTablesPriceBook(4/20) 35
PariScreen,HeightAdjustableTablescontinued
Specification Information
Step1.
Y1116. A
Step2.Height
A privacy(42"high)A
B privacy&modesty(42"high/10"belowsurface)A
C privacy(46"high)A
D privacy&modesty(46"high/10"belowsurface)A
E privacy(53"high)A
F privacy&modesty(53"high/10"belowsurface)A
Step3.Width
24 24"wideA
30 30"wideA
36 36"wideA
42 42"wideA
48 48"wideA
54 54"wideA
60 60"wideA
66 66"wideA
72 72"wideA
Step4.SurfaceMaterial
For 24" wide (24), 30" wide (30), 36" wide (36), 42" wide (42), or 48"
wide (48)
R tackablefabric,horizontalA
T tackablefabricA
For 54" wide (54), 60" wide (60), 66" wide (66), or 72" wide (72)
R tackablefabric,horizontalA
PricesforSteps1-4.
R T
Y1116. A 24 $448 448
30 $521 521
36 $541 541
42 $573 573
48 $594 594
54 $652 —
60 $701 —
66 $750 —
72 $790 —
B 24 $542 542
30 $580 580
36 $616 616
42 $652 652
48 $724 724
54 $815 —
60 $836 —
66 $900 —
72 $923 —
C 24 $509 509
30 $546 546
36 $584 584
42 $620 620
48 $684 684
54 $752 —
60 $839 —
66 $879 —
72 $915 —
D 24 $654 654
30 $691 691
36 $727 727
42 $764 764
48 $822 822
54 $862 —
60 $913 —
66 $959 —
72 $984 —
E 24 $671 671
30 $707 707
36 $744 744
42 $802 802
48 $826 826
54 $873 —
60 $890 —
66 $912 —
72 $933 —
F 24 $738 738
30 $775 775
36 $812 812
42 $849 849
48 $914 914
54 $946 —
60 $981 —
66 $1061 —
72 $1082 —
Mot
ia®
Scr
eens
==
==
==
==
==
==
36 Motia®Sit-to-StandTablesPriceBook(4/20) HermanMiller
PariScreen,HeightAdjustableTablescontinued
Step5.CableTrough
For privacy & modesty (42" high/10" below surface) (B), privacy &
modesty (46" high/10" below surface) (D), or privacy & modesty (53"
high/10" below surface) (F)
NC nocablewayA +$0
CW cablewayA +$25
Step6.Fabric
PriceCategoryC +$101
PriceCategory1 +$0
PriceCategory2 +$19
PriceCategory3 +$41
PriceCategory4 +$80
PriceCategoryE +$152
==
==
==
==
==
==
Motia® S
creens
HermanMiller Motia®Sit-to-StandTablesPriceBook(4/20) 37
PersonalSideScreen
Product Information
Description
Thissidescreenhasatackablesurfaceandslipsontothefrontof
mostHermanMillerworksurfacestoprovidevisualprivacyontables,
benches,andsystemsproduct.Itattacheswithouttoolsandcanbe
securedinplacewithscrewsontheundersideofthesurface.Clamp
finishisgraphite.
Notes
Screenheightis13"aboveworksurface.
ScreenisnotcompatiblewithLayoutStudio®.
Screencanbeusedwithworksurfacesupto11/4"thick.
Bottomofattachmentbracketextends11/2"belowworksurface.
ScreenacceptsCustomer’sOwnMaterial(COM).Yardageisestimated
fornondirectional54"-widefabrics.
Forverticalfabricdirection(T):
Height—Yardage
13—0.94
Forhorizontalfabricdirection(R):
Height—Yardage
13—1.00
Forinformationonmultiplequantitiesordirectionalfabrics,contact
COMDepartment.SeeOrderInformationinAppendices.
Dimensions
Specification Information
Step1.
Y1117. A
Step2.Height
13 13"highA
Step3.SurfaceMaterial
R tackablefabric,horizontalA
T tackablefabricA
PricesforSteps1-3.
R T
Y1117. 13 $366 366
Step4.Fabric
PriceCategoryC +$55
PriceCategory1 +$0
PriceCategory2 +$11
PriceCategory3 +$23
PriceCategory4 +$44
Y1117.
Mot
ia®
Scr
eens
==
==
==
==
==
==
38 Motia®Sit-to-StandTablesPriceBook(4/20) HermanMiller
Surface-AttachedScreen,FlatEdge
Product Information
Description
Thissurface-attachedtackablescreenattachestoanindividualtable,
desk,orworksurface.Ithasaframelessall-fabricdesignwithaflat
edge,andcomesinprivacyandmodestysizes.Attachmenthardware
included.
Notes
Privacyandmodestypanelactualwidthis2"lessthanspecifiedwidth.
Privacyscreen(A)topedgeis13"abovetopofworksurface;bottom
edgeis33/4"belowworksurface.
Privacy&modestyscreen(B)topedgeis13"abovetopofworksurface;
bottomedgeis10"belowworksurface.
Privacyscreen(A)topedgealignswiththe42"highCanvasdatumline;
bottomedgeis4"belowworksurface.
Privacy&modestyscreen(B)topedgealignswiththe42"highCanvas
datumline;bottomedgeis9"belowworksurface.
Privacyscreen(C)topedgealignswiththe46"highCanvasdatumline;
bottomedgeis4"belowworksurface.
Privacy&modestyscreen(D)topedgealignswiththe46"highCanvas
datumline;bottomedgeis9"belowworksurface.
Privacyscreen(E)topedgealignswiththe53"highCanvasdatumline;
bottomedgeis4"belowworksurface.
Privacy&modestyscreen(F)topedgealignswiththe53"highCanvas
datumline;bottomedgeis9"belowworksurface.
Screens54"wideandwiderincludeanadditional1"-widecenter
mountingbracket.
Recommendedmountingcreatesa1"gapbetweenbackedgeofsurface
andthescreentoaccommodatecableroutingandtheattachmentor
clamp-mountingofotherhardwaretothesurface.
Optionalcablemanagementtroughisonlyavailablewhenspecifying
privacy&modestyheightoption(B).Troughfinishisgraphite.
Attachmentbracketsareinsetfromedgeofscreenbyapproximately8"
andrequire21/2"ofworksurfaceforattachment.
Attachmentbracketfinishispaintedgraphite.
ScreenacceptsCustomer’sOwnMaterial(COM).Yardageisestimated
fornondirectional54"-widefabrics.
Forverticalfabricdirection(T):
Height—Yardage
A—1.51
B—1.89
C—1.76
D—2.14
E—2.21
F—2.58
Forhorizontalfabricdirection(R):
Width—Yardage
ForheightsA/B:
24—0.88
30—1.07
36—1.26
42—1.45
48—1.64
54—1.83
60—2.02
66—2.21
72—2.39
ForheightsC/D/E/F:
24—1.76
30—2.14
36—2.52
42—2.90
48—3.28
54—3.65
60—4.03
66—4.41
72—4.79
Forinformationonmultiplequantitiesordirectionalfabrics,contact
COMDepartment.SeeOrderInformationinAppendices.
Dimensions
Y1118.
==
==
==
==
==
==
Motia® S
creens
HermanMiller Motia®Sit-to-StandTablesPriceBook(4/20) 39
Surface-AttachedScreen,FlatEdgecontinued
Specification Information
Step1.
Y1118. A
Step2.Height
A privacy(42"high)A
B privacy&modesty(42"high/9"belowsurface)A
C privacy(46"high)A
D privacy&modesty(46"high/9"belowsurface)A
E privacy(53"high)A
F privacy&modesty(53"high/9"belowsurface)A
Step3.Width
24 24"wideA
30 30"wideA
36 36"wideA
42 42"wideA
48 48"wideA
54 54"wideA
60 60"wideA
66 66"wideA
72 72"wideA
Step4.SurfaceMaterial
For 24" wide (24), 30" wide (30), 36" wide (36), 42" wide (42), or 48"
wide (48)
R tackablefabric,horizontalA
T tackablefabricA
For 54" wide (54), 60" wide (60), 66" wide (66), or 72" wide (72)
R tackablefabric,horizontalA
PricesforSteps1-4.
R T
Y1118. A 24 $311 311
30 $336 336
36 $401 401
42 $432 432
48 $463 463
54 $491 —
60 $533 —
66 $558 —
72 $595 —
B 24 $387 387
30 $418 418
36 $448 448
42 $479 479
48 $505 505
54 $531 —
60 $586 —
66 $601 —
72 $646 —
C 24 $388 388
30 $428 428
36 $462 462
42 $507 507
48 $569 569
54 $599 —
60 $671 —
66 $705 —
72 $756 —
D 24 $489 489
30 $546 546
36 $609 609
42 $623 623
48 $648 648
54 $666 —
60 $737 —
66 $799 —
72 $831 —
E 24 $529 529
30 $538 538
36 $552 552
42 $650 650
48 $673 673
54 $690 —
60 $721 —
66 $786 —
72 $837 —
F 24 $643 643
30 $650 650
36 $662 662
42 $673 673
48 $682 682
54 $691 —
60 $764 —
66 $803 —
72 $971 —
Mot
ia®
Scr
eens
==
==
==
==
==
==
40 Motia®Sit-to-StandTablesPriceBook(4/20) HermanMiller
Surface-AttachedScreen,FlatEdgecontinued
Step5.CableTrough
For privacy & modesty (42" high/ 9" below surface) (B), privacy &
modesty (46" high/ 9" below surface) (D), or privacy & modesty (53"
high/ 9" below surface) (F)
NC nocablewayA +$0
CW cablewayA +$25
Step6.Fabric
PriceCategoryC +$111
PriceCategory1 +$0
PriceCategory2 +$21
PriceCategory3 +$49
PriceCategory4 +$93
PriceCategoryE +$152
For tackable fabric, horizontal (R)
PriceCategoryC +$111
PriceCategory1 +$0
PriceCategory2 +$21
PriceCategory3 +$49
PriceCategory4 +$93
==
==
==
==
==
==
Motia® S
creens
HermanMiller Motia®Sit-to-StandTablesPriceBook(4/20) 41
PersonalSideScreen,Rectangular
Product Information
Description
Thissidescreenhasatackablesurfaceandslipsontothefrontof
mostHermanMillerworksurfacestoprovidevisualprivacyontables,
benches,andsystemsproduct.Itattacheswithouttoolsandcanbe
securedinplacewithscrewsontheundersideofthesurface.Clamp
finishisgraphite.
Notes
Screenheightis13"aboveworksurface.
ScreenisnotcompatiblewithLayoutStudio®.
Screencanbeusedwithworksurfacesupto11/4"thick.
Bottomofattachmentbracketextends11/2"belowworksurface.
ScreenacceptsCustomer’sOwnMaterial(COM).Yardageisestimated
fornondirectional54"-widefabrics.
Forverticalfabricdirection(T):
Height—Yardage
13—0.94
Forhorizontalfabricdirection(R):
Height—Yardage
13—1.00
Forinformationonmultiplequantitiesordirectionalfabrics,contact
COMDepartment.SeeOrderInformationinAppendices.
Dimensions
Specification Information
Step1.
Y1119. A
Step2.Height
13 13"highA
Step3.SurfaceMaterial
R tackablefabric,horizontalA
T tackablefabricA
PricesforSteps1-3.
R T
Y1119. 13 $357 357
Step4.SurfaceFinish
PriceCategory1 +$0
PriceCategory2 +$9
PriceCategory3 +$0
PriceCategory4 +$39
PriceCategoryC +$55
Y1119.
Mot
ia®
Scr
eens
==
==
==
==
==
==
42 Motia®Sit-to-StandTablesPriceBook(4/20) HermanMiller
LaminateScreen,SurfaceAttached
Product Information
Description
Thisscreenattachestoanindividualheightadjustableworksurface.It
hasalaminatesurfacewithframelessdesignandcomesinprivacyand
modestysizes.Attachmenthardwareincluded.
Notes
Privacyandmodestypanelactualwidthis2"lessthanspecifiedwidth.
Privacyscreen(13A)topedgealignswiththe42"-highCanvasdatum
line;bottomedgeis4"belowworksurface.
Privacy&modestyscreen(13B)topedgealignswiththe42"-high
Canvasdatumline;bottomedgeis111/8"belowworksurface.
Screens54"wideandwiderincludeanadditional1"-widecenter
mountingbracket.
Recommendedmountingcreatesa1"gapbetweenbackedgeofsurface
andthescreentoaccommodatecableroutingandtheattachmentor
clamp-mountingofotherhardwaretothesurface.
Optionalcablemanagementtroughisonlyavailablewhenspecifying
privacy&modestyheightoption(13B).Troughfinishisgraphite.
Attachmentbracketsareinsetfromedgeofscreenbyapproximately8"
andrequire21/2"ofworksurfaceforattachment.
Attachmentbracketfinishispaintedgraphite.
Dimensions
Specification Information
Step1.
Y1120.
Step2.Height
13A privacy(131/2"aboveworksurface)
13B privacy&modesty(131/2"aboveworksurface/111/8"below
worksurface)
Step3.Width
24 24"wide
30 30"wide
36 36"wide
42 42"wide
48 48"wide
54 54"wide
60 60"wide
66 66"wide
72 72"wide
Step4.SurfaceMaterial
L laminate
U laminate/universaledge
PricesforSteps1-4.
L U
Y1120. 13A 24 $190 190
30 $201 201
36 $212 212
42 $222 222
48 $233 233
54 $242 242
60 $250 250
66 $259 259
72 $269 269
13B 24 $235 235
30 $247 247
36 $260 260
42 $274 274
48 $286 286
54 $298 298
60 $310 310
66 $320 320
72 $330 330
Y1120.
==
==
==
==
==
==
Motia® S
creens
HermanMiller Motia®Sit-to-StandTablesPriceBook(4/20) 43
LaminateScreen,SurfaceAttachedcontinued
Step5.GrainDirection
For 24" wide (24), 30" wide (30), 36" wide (36), 42" wide (42), 48" wide
(48), 54" wide (54), or 60" wide (60)
VTG verticalgrain +$0
HRG horizontalgrain +$0
For 66" wide (66) or 72" wide (72)
HRG horizontalgrain +$0
Step6.CableTrough
For privacy (131/2" above worksurface) (13A)
NC nocableway +$0
For privacy & modesty (131/2" above worksurface/111/8" below
worksurface) (13B)
NC nocableway +$0
CW cableway +$25
Step7.SurfaceFinish
76 lightbrownwalnut +$0
8Q folkstonegrey +$0
91 white +$0
98 studiowhite +$0
CL coolgreyneutral +$0
HM naturalmaple +$0
HP lightanigre +$0
HX agedcherry +$0
HY walnutoncherry +$0
LA lightash +$0
LBA clearonash +$0
LBR phantomecru +$0
LBS phantomcocoa +$0
LBU mediummattewalnut +$0
LBV warmgreyteak +$0
LBB oakonash +$0
LBC walnutonash +$0
LBD darkbrownwalnut +$0
LBF neutraltwill +$0
LBG sarumtwill +$0
LBH earthentwill +$0
LBJ graphitetwill +$0
LBK pewtermesh +$0
LBL steelmesh +$0
LBM crisplinen +$0
LBN classiclinen +$0
LBP casuallinen +$0
LBQ whitetwill +$0
LU softwhite +$0
WL sandstone +$0
WN warmgreyneutral +$0
Mot
ia®
Scr
eens
==
==
==
==
==
==
44 Motia®Sit-to-StandTablesPriceBook(4/20) HermanMiller
LaminateScreen,SurfaceAttachedcontinued
Step8.EdgeFinish
For laminate (L)
76 lightbrownwalnut +$0
8Q folkstonegrey +$0
91 white +$0
98 studiowhite +$0
BU blackumber +$0
CL coolgreyneutral +$0
HF innertonelight +$0
HM naturalmaple +$0
HP lightanigre +$0
HX agedcherry +$0
HY walnutoncherry +$0
LA lightash +$0
LBA clearonash +$0
LBR phantomecru +$0
LBS phantomcocoa +$0
LBU mediummattewalnut +$0
LBV warmgreyteak +$0
LBB oakonash +$0
LBC walnutonash +$0
LBD darkbrownwalnut +$0
LBF neutraltwill +$0
LBG sarumtwill +$0
LBH earthentwill +$0
LBJ graphitetwill +$0
LBK pewtermesh +$0
LBL steelmesh +$0
LBM crisplinen +$0
LBN classiclinen +$0
LBP casuallinen +$0
LBQ whitetwill +$0
LU softwhite +$0
MT mediumtone +$0
WL sandstone +$0
WN warmgreyneutral +$0
For laminate/universal edge (U)
PLY plywoodedge +$50
==
==
==
==
==
==
Motia® S
creens
HermanMiller Motia®Sit-to-StandTablesPriceBook(4/20) 45
VistaPrivacy+ModestyScreen-DoubleSided,HeightAdjustableTable
Product Information
Description
Thissheetmetalprivacy+modestyscreenattachestoaMotia®Vista™
heightadjustabletable.Thescreenwrapsaroundbothendsofthework
surface.Attachmenthardwareincluded.
Notes
Actualscreenwidthis2"lessthanspecifiedwidth.
Privacytopedgeis7"abovetopofworksurfaceata36"datumheight.
Bottomedgeofscreenis15"belowtopofworksurface.
Recommendedmountingcreatesa1"gapbetweenbackedgeofsurface
andthescreentoaccommodatecableroutingandtheattachmentor
clamp-mountingofotherhardwaretothesurface.
Thereisnotenoughclearanceforanopenframescreen(FG345.)tobe
mountedabovetheworksurface.
Dimensions
Specification Information
Step1.
Y1130. A
Step2.Height
A36 36"high/15"belowworksurfaceA
Step3.Depth
24 24"deepA
30 30"deepA
Step4.Width
48 48"wideA
54 54"wideA
60 60"wideA
66 66"wideA
72 72"wideA
PricesforSteps1-4.
48 54 60 66 72
Y1130. A36 24 $746 777 807 845 894
30 $780 811 842 885 928
Step5.ScreenFinish
SmoothPaint
8Q folkstonegreyA +$0
91 whiteA +$0
98 studiowhiteA +$0
CL coolgreyneutralA +$0
WL sandstoneA +$0
WN warmgreyneutralA +$0
MetallicPaint
CN metallicchampagneA +$0
EH metallicbronzeA +$0
MS metallicsilverA +$0
SandTexturePaint
BK blackA +$0
G1 graphiteA +$0
Y1130.
Mot
ia®
Scr
eens
==
==
==
==
==
==
46 Motia®Sit-to-StandTablesPriceBook(4/20) HermanMiller
VistaModestyScreen-DoubleSided,HeightAdjustableTable
Product Information
Description
ThissheetmetalmodestyscreenattachestoaMotia®Vista™height
adjustabletable.Thescreenwrapsaroundbothendsofthework
surface.Attachmenthardwareincluded.
Notes
Actualscreenwidthis2"lessthanspecifiedwidth.
Bottomedgeofscreenis15"belowtopofworksurface.
Recommendedmountingcreatesa1"gapbetweenbackedgeofsurface
andthescreentoaccommodatecableroutingandtheattachmentor
clamp-mountingofotherhardwaretothesurface.
Thereisenoughclearanceforanopenframescreen(FG345.)tobe
mountedabovetheworksurface.Orderseparately.
Dimensions
Specification Information
Step1.
Y1131. A
Step2.Depth
24 24"deepA
30 30"deepA
Step3.Width
48 48"wideA
54 54"wideA
60 60"wideA
66 66"wideA
72 72"wideA
PricesforSteps1-3.
48 54 60 66 72
Y1131. 24 $607 621 634 692 749
30 $628 641 654 712 770
Step4.ScreenFinish
SmoothPaint
8Q folkstonegreyA +$0
91 whiteA +$0
98 studiowhiteA +$0
CL coolgreyneutralA +$0
WL sandstoneA +$0
WN warmgreyneutralA +$0
MetallicPaint
CN metallicchampagneA +$0
EH metallicbronzeA +$0
MS metallicsilverA +$0
SandTexturePaint
BK blackA +$0
G1 graphiteA +$0
Y1131.
==
==
==
==
==
==
Motia® S
creens
HermanMiller Motia®Sit-to-StandTablesPriceBook(4/20) 47
PariScreen,Delineation
Product Information
Description
Thistackablefabricscreenattachestoaworksurfaceeitherattheseam
orattherightorleftedgetoprovidedivisionandboundarybetween
workers.Itattacheswithnointerferencefromsupportsbelowthework
surface.Attachmenthardwareincluded.
Notes
Screenheightis131/2"or171/2"aboveworksurface,aligningwithbead
heightsof41"and45".
Screenwidthmatchesworksurfacedepthsthathavea1"gapatthe
backedge.
2attachmentmethodsshipwiththeend-of-runrighthanded(CR)and
end-of-runlefthanded(CL)screen.Thescreencanbeinstalledusingthe
bracket,orusingthreadedscrewsthatdrillbayonetsdirectlyintothe
surface.Seeplanningguideforexactlocationofholes.
End-of-runscreendoesnotworkonCanvasBeam.
Seeplanningguideforapplicationsandothercompatibleproductlines.
ScreenacceptsCustomer’sOwnMaterial(COM).Yardageisestimated
fornondirectional54"-widefabrics.
Forverticalfabricdirection(T):
Height—Yardage
42—1.19
46—1.45
Forhorizontalfabricdirection(R):
Width—Yardage
24—0.90
30—1.10
36—1.30
Forinformationonmultiplequantitiesordirectionalfabrics,contact
COMDepartment.SeeOrderInformationinAppendices.
Dimensions
FT354.
Mot
ia®
Scr
eens
==
==
==
==
==
==
48 Motia®Sit-to-StandTablesPriceBook(4/20) HermanMiller
PariScreen,Delineationcontinued
Specification Information
Step1.
FT354. A
Step2.AttachmentType
CL CanvasSurfaceAttached,EndofRunLeftHandedA
CR CanvasSurfaceAttached,EndofRunRightHandedA
Step3.Height
42 42"highA
46 46"highA
Step4.Width
24 24"wideA
30 30"wideA
36 36"wideA
Step5.SurfaceMaterial
R tackablefabric,horizontalA
T tackablefabricA
PricesforSteps1-5.
24R 24T 30R 30T 36R 36T
FT354. CL 42 $865 865 896 896 921 921
46 $911 911 947 947 983 983
CR 42 $865 865 896 896 921 921
46 $911 911 947 947 983 983
Step6.BracketFinish
8Q folkstonegreyA +$0
91 whiteA +$0
98 studiowhiteA +$0
BK blackA +$0
G1 graphiteA +$0
WL sandstoneA +$0
WN warmgreyneutralA +$0
Step7.Fabric
PriceCategoryC +$107
PriceCategory1 +$0
PriceCategory2 +$17
PriceCategory3 +$40
PriceCategory4 +$70
PriceCategoryE +$169
==
==
==
==
==
==
Motia® S
creens
HermanMiller Motia®Sit-to-StandTablesPriceBook(4/20) 49
FlatEdgeScreen,Delineation
Product Information
Description
Thistackablefabricscreenattachestoaworksurfaceattherightorleft
edgetoprovidedivisionandboundarybetweenworkers.Itattaches
withnointerferencefromsupportsbelowtheworksurface.Attachment
hardwareincluded.
Notes
Screenheightis131/2"or171/2"aboveworksurface,aligningwithbead
heightsof41"and45".
Screenwidthmatchesworksurfacedepthsthathavea1"gapatthe
backedge.
2attachmentmethodsshipwiththeend-of-runrighthanded(CR)and
end-of-runlefthanded(CL)screen.Thescreencanbeinstalledusingthe
bracket,orusingthreadedscrewsthatdrillbayonetsdirectlyintothe
surface.Seeplanningguideforexactlocationofholes.
End-of-runscreendoesnotworkonCanvasBeam.
Seeplanningguideforapplicationsandothercompatibleproductlines.
ScreenacceptsCustomer’sOwnMaterial(COM).Yardageisestimated
fornondirectional54"-widefabrics.
Forverticalfabricdirection(T):
Height—Yardage
42—1.19
46—1.45
Forhorizontalfabricdirection(R):
Width—Yardage
24—0.90
30—1.10
36—1.30
Forinformationonmultiplequantitiesordirectionalfabrics,contact
COMDepartment.SeeOrderInformationinAppendices.
Dimensions
FT358.
Mot
ia®
Scr
eens
==
==
==
==
==
==
50 Motia®Sit-to-StandTablesPriceBook(4/20) HermanMiller
FlatEdgeScreen,Delineationcontinued
Specification Information
Step1.
FT358.
Step2.AttachmentType
CL CanvasSurfaceAttached,EndofRunLeftHanded
CR CanvasSurfaceAttached,EndofRunRightHanded
Step3.Height
42 42"high
46 46"high
Step4.Width
24 24"wide
30 30"wide
36 36"wide
Step5.SurfaceMaterial
R tackablefabric,horizontal
T tackablefabric
PricesforSteps1-5.
24R 24T 30R 30T 36R 36T
FT358. CL 42 $536 536 566 566 577 577
46 $582 582 618 618 639 639
CR 42 $536 536 566 566 577 577
46 $582 582 618 618 639 639
Step6.BracketFinish
8Q folkstonegrey +$0
91 white +$0
98 studiowhite +$0
BK black +$0
G1 graphite +$0
WL sandstone +$0
WN warmgreyneutral +$0
Step7.Fabric
PriceCategoryC +$102
PriceCategory1 +$0
PriceCategory2 +$17
PriceCategory3 +$40
PriceCategory4 +$70
PriceCategoryE +$169
==
==
==
==
==
==
==
= M
otia® Storage
HermanMiller Motia®Sit-to-StandTablesPriceBook(4/20) 51
SuspendedCubby
Product Information
Description
Thissuspendedcubbymountstotheundersideofatethered,fixed-
heightorheight-adjustableworksurface.Ithaslaminateorveneercase
andlaminateorveneerfronts.Lockisoptional.Feltlinerincluded.
Notes
Tousethesuspendedcubby,surfacesupportpositionsmustbe
inbound.
Suspendedcubbyishanded,determinedfromuserviewpointwhile
facingthesurface.
Whenmountingsuspendedcubbybelowaheight-adjustabletable
surface,theminimumheightoftablemustbesetataheighthigherthan
thecomponentsbelowit.
Seeplanningguideformoreinformation.
Dimensions
Specification Information
Step1.
L2SCF. A
Step2.Type
L lefthandA +$1081
R righthandA +$1081
Step3.CaseMaterial
L laminatecasematerialA +$0
V veneercasematerialA +$1160
Step4.FrontMaterial
L laminatefrontmaterialA +$0
V veneerfrontmaterialA +$291
Step5.PullType
A arcpull +$0
K barpull +$0
Step6.Lock
L lockA +$0
N nolockA -$26
L2SCF.
Mot
ia®
Sto
rage
==
==
==
==
==
==
==
=
52 Motia®Sit-to-StandTablesPriceBook(4/20) HermanMiller
SuspendedCubbycontinued
Step7.CaseFinish
For laminate case material (L)
76 lightbrownwalnutA +$0
8Q folkstonegreyA +$0
91 whiteA +$0
98 studiowhiteA +$0
CL coolgreyneutralA +$0
G1 graphiteA +$0
HM naturalmapleA +$0
HP lightanigreA +$0
HX agedcherryA +$0
HY walnutoncherryA +$0
LA lightashA +$0
LBA clearonashA +$0
LBB oakonashA +$0
LBC walnutonashA +$0
LBD darkbrownwalnutA +$0
LBF neutraltwillA +$0
LBG sarumtwillA +$0
LBH earthentwillA +$0
LBJ graphitetwillA +$0
LBK pewtermeshA +$0
LBL steelmeshA +$0
LBM crisplinenA +$0
LBN classiclinenA +$0
LBP casuallinenA +$0
LBQ whitetwillA +$0
LBR phantomecruA +$0
LBS phantomcocoaA +$0
LBU mediummattewalnutA +$0
LBV warmgreyteakA +$0
LU softwhiteA +$0
WL sandstoneA +$0
WN warmgreyneutralA +$0
For veneer case material (V)
2U lightbrownwalnutA +$0
40 darkbrownwalnutA +$0
ED agedcherryA +$0
EK mediumredwalnutA +$0
ET clearonashA +$0
EU oakonashA +$0
EV walnutonashA +$0
EW mediummattewalnutA +$0
UL naturalmapleA +$0
UX walnutoncherryA +$0
Step8.FrontFinish
For laminate front material (L)
76 lightbrownwalnutA +$0
8Q folkstonegreyA +$0
91 whiteA +$0
98 studiowhiteA +$0
CL coolgreyneutralA +$0
G1 graphiteA +$0
HM naturalmapleA +$0
HP lightanigreA +$0
HX agedcherryA +$0
HY walnutoncherryA +$0
LA lightashA +$0
LBA clearonashA +$0
LBB oakonashA +$0
LBC walnutonashA +$0
LBD darkbrownwalnutA +$0
LBF neutraltwillA +$0
LBG sarumtwillA +$0
LBH earthentwillA +$0
LBJ graphitetwillA +$0
LBK pewtermeshA +$0
LBL steelmeshA +$0
LBM crisplinenA +$0
LBN classiclinenA +$0
LBP casuallinenA +$0
LBQ whitetwillA +$0
LBR phantomecruA +$0
LBS phantomcocoaA +$0
LBU mediummattewalnutA +$0
LBV warmgreyteakA +$0
LU softwhiteA +$0
WL sandstoneA +$0
WN warmgreyneutralA +$0
For veneer front material (V)
2U lightbrownwalnutA +$0
40 darkbrownwalnutA +$0
ED agedcherryA +$0
EK mediumredwalnutA +$0
ET clearonashA +$0
EU oakonashA +$0
EV walnutonashA +$0
EW mediummattewalnutA +$0
UL naturalmapleA +$0
UX walnutoncherryA +$0
==
==
==
==
==
==
==
= M
otia® Storage
HermanMiller Motia®Sit-to-StandTablesPriceBook(4/20) 53
SuspendedCubbycontinued
Step9.PullFinish
For arc pull (A)
NH brushednickel +$0
NK blacknickel +$0
SmoothPaint
For bar pull (K)
8Q folkstonegreyA +$0
91 whiteA +$0
98 studiowhiteA +$0
G1 graphiteA +$0
WL sandstoneA +$0
MetallicPaint
For bar pull (K)
CN metallicchampagneA +$0
MS metallicsilverA +$0
SandTexturePaint
For bar pull (K)
79 greenappleA +$16
BK blackA +$16
MY3 yellowoxideA +$16
RO redA +$16
TRQ turquoiseA +$16
Step10.LockOption
For lock (L)
KA keyedalike +$0
KC keyeddifferently,chrome +$0
KD keyeddifferently,black +$0
Mot
ia®
Sto
rage
==
==
==
==
==
==
==
=
54 Motia®Sit-to-StandTablesPriceBook(4/20) HermanMiller
SuspendedDrawer
Product Information
Description
Thissuspendeddrawermountstotheundersideofatethered,fixed-
heightorheight-adjustableworksurface.Ithaslaminateorveneercase
andlaminateorveneerfronts.Lockisoptional.Feltlinerincluded.
Notes
Tousethesuspendeddrawer,surfacesupportpositionsmustbe
inbound.
Suspendeddrawerishanded,determinedfromuserviewpointwhile
facingthesurface.
Whenmountingsuspendeddrawerbelowaheight-adjustabletable
surface,theminimumheightoftablemustbesetataheighthigherthan
thecomponentsbelowit.
Seeplanningguideformoreinformation.
Dimensions
Specification Information
Step1.
L2SDF. A
Step2.Type
L lefthandA +$834
R righthandA +$834
Step3.CaseMaterial
L laminatecasematerialA +$0
V veneercasematerialA +$897
Step4.FrontMaterial
L laminatefrontmaterialA +$0
V veneerfrontmaterialA +$212
Step5.PullType
A arcpull +$0
K barpull +$0
Step6.Lock
L lockA +$0
N nolockA -$26
L2SDF.
==
==
==
==
==
==
==
= M
otia® Storage
HermanMiller Motia®Sit-to-StandTablesPriceBook(4/20) 55
SuspendedDrawercontinued
Step7.CaseFinish
For laminate case material (L)
76 lightbrownwalnutA +$0
8Q folkstonegreyA +$0
91 whiteA +$0
98 studiowhiteA +$0
CL coolgreyneutralA +$0
G1 graphiteA +$0
HM naturalmapleA +$0
HP lightanigreA +$0
HX agedcherryA +$0
HY walnutoncherryA +$0
LA lightashA +$0
LBA clearonashA +$0
LBB oakonashA +$0
LBC walnutonashA +$0
LBD darkbrownwalnutA +$0
LBF neutraltwillA +$0
LBG sarumtwillA +$0
LBH earthentwillA +$0
LBJ graphitetwillA +$0
LBK pewtermeshA +$0
LBL steelmeshA +$0
LBM crisplinenA +$0
LBN classiclinenA +$0
LBP casuallinenA +$0
LBQ whitetwillA +$0
LBR phantomecruA +$0
LBS phantomcocoaA +$0
LBU mediummattewalnutA +$0
LBV warmgreyteakA +$0
LU softwhiteA +$0
WL sandstoneA +$0
WN warmgreyneutralA +$0
For veneer case material (V)
2U lightbrownwalnutA +$0
40 darkbrownwalnutA +$0
ED agedcherryA +$0
EK mediumredwalnutA +$0
ET clearonashA +$0
EU oakonashA +$0
EV walnutonashA +$0
EW mediummattewalnutA +$0
UL naturalmapleA +$0
UX walnutoncherryA +$0
Step8.FrontFinish
For laminate front material (L)
76 lightbrownwalnutA +$0
8Q folkstonegreyA +$0
91 whiteA +$0
98 studiowhiteA +$0
CL coolgreyneutralA +$0
G1 graphiteA +$0
HM naturalmapleA +$0
HP lightanigreA +$0
HX agedcherryA +$0
HY walnutoncherryA +$0
LA lightashA +$0
LBA clearonashA +$0
LBB oakonashA +$0
LBC walnutonashA +$0
LBD darkbrownwalnutA +$0
LBF neutraltwillA +$0
LBG sarumtwillA +$0
LBH earthentwillA +$0
LBJ graphitetwillA +$0
LBK pewtermeshA +$0
LBL steelmeshA +$0
LBM crisplinenA +$0
LBN classiclinenA +$0
LBP casuallinenA +$0
LBQ whitetwillA +$0
LBR phantomecruA +$0
LBS phantomcocoaA +$0
LBU mediummattewalnutA +$0
LBV warmgreyteakA +$0
LU softwhiteA +$0
WL sandstoneA +$0
WN warmgreyneutralA +$0
For veneer front material (V)
2U lightbrownwalnutA +$0
40 darkbrownwalnutA +$0
ED agedcherryA +$0
EK mediumredwalnutA +$0
ET clearonashA +$0
EU oakonashA +$0
EV walnutonashA +$0
EW mediummattewalnutA +$0
UL naturalmapleA +$0
UX walnutoncherryA +$0
Mot
ia®
Sto
rage
==
==
==
==
==
==
==
=
56 Motia®Sit-to-StandTablesPriceBook(4/20) HermanMiller
SuspendedDrawercontinued
Step9.PullFinish
For arc pull (A)
NH brushednickel +$0
NK blacknickel +$0
SmoothPaint
For bar pull (K)
8Q folkstonegreyA +$0
91 whiteA +$0
98 studiowhiteA +$0
G1 graphiteA +$0
WL sandstoneA +$0
MetallicPaint
For bar pull (K)
CN metallicchampagneA +$0
MS metallicsilverA +$0
SandTexturePaint
For bar pull (K)
79 greenappleA +$16
BK blackA +$16
MY3 yellowoxideA +$16
RO redA +$16
TRQ turquoiseA +$16
Step10.LockOption
For lock (L)
KA keyedalike +$0
KC keyeddifferently,chrome +$0
KD keyeddifferently,black +$0
==
==
==
==
==
==
==
==
==
Motia® A
ccessories
HermanMiller Motia®Sit-to-StandTablesPriceBook(4/20) 57
Stiffener
Product Information
Description
ThisstiffenerisusedtoaddadditionalstiffnesstoaCanvas
freestandingsurface,CanvasorEthospace®surface-attachedsurface,
peninsulaoranyframe-attachedsurfacewhenacentercantilever
cannotbeused.Attachmenthardwareincluded.
Notes
CanvasandEthospacelaminateorveneersurfaces54"wideorwider
andpaintedformcoatsurfaces48"wideorwiderthatcannotusea
centercantileverrequirestiffener(s).
SeeCanvasOfficeLandscape®PlanningGuideorEthospaceWork
SurfacePlanningGuideforspecificstiffenerguidelines.
Stiffenerhangsbelowsurfaceandis11/4"high.
Dimensions
Specification Information
Step1.
FV696.
Step2.Width
34 337/8"wide
39 385/8"wide
43 431/4"wide
48 48"wide
57 573/8"wide
62 621/8"wide
67 663/4"wide
71 711/2"wide
81 807/8"wide
PricesforSteps1-2.
FV696. 34 $73
39 $75
43 $75
48 $75
57 $75
62 $75
67 $75
71 $75
81 $75
FV696.
58 Motia®Sit-to-StandTablesPriceBook(4/20) HermanMiller
HermanMiller Motia®Sit-to-StandTablesPriceBook(4/20) 59
IndexbyProductNameIndex: P
roduct Nam
e
Motia® Sit-to-Stand Tables
C-Foot3LegBaseKitpage(s)21 page(s)21
ExtendedCornerTablewithC-Foot11 11
ExternalCableManager27 27
FlatEdgeScreen,Delineation49 49
HeightAdjustableBaseKitwithC-Foot23 23
HeightAdjustableBaseKitwithT-Foot19 19
Height-AdjustableVerticalCableManager33 33
HingedCableTrough32 32
LaminateScreen,SurfaceAttached42 42
LogicMini28 28
LogicMiniGrommet30 30
Motia®Vista™AdjustableBaseKitwithT-Foot25 25
Motia®Vista™RectangularTablewithT-Foot14 14
PariScreen,Delineation47 47
PariScreen,HeightAdjustableTables34 34
PersonalSideScreen37 37
PersonalSideScreen,Rectangular41 41
PowerPlugStrip31 31
RectangularTablewithC-Foot5 5
RectangularTablewithT-Foot8 8
Stiffener57 57
Surface-AttachedScreen,FlatEdge38 38
SuspendedCubby51 51
SuspendedDrawer54 54
VistaModestyScreen-DoubleSided,HeightAdjustableTable46 46
VistaPrivacy+ModestyScreen-DoubleSided,HeightAdjustable
Table45 45
60 Motia®Sit-to-StandTablesPriceBook(4/20) HermanMiller
HermanMiller Motia®Sit-to-StandTablesPriceBook(4/20) 61
IndexbyProductNumberIndex: P
roduct Num
ber
DU11B. ExternalCableManagerpage(s)27 page(s)27
DU11S.
DU15B. Height-AdjustableVerticalCableManager33 33
DU15S.
DV6ACS RectangularTablewithC-Foot5 5
DV6ATS RectangularTablewithT-Foot8 8
DV6ECS ExtendedCornerTablewithC-Foot11 11
DV6GTS Motia®Vista™RectangularTablewithT-Foot14 14
DV7AC. HeightAdjustableBaseKitwithC-Foot23 23
DV7AT. HeightAdjustableBaseKitwithT-Foot19 19
DV7FC. C-Foot3LegBaseKit21 21
DV7GT. Motia®Vista™AdjustableBaseKitwithT-Foot25 25
FT354. PariScreen,Delineation47 47
FT358. FlatEdgeScreen,Delineation49 49
FV696. Stiffener57 57
L2SCF. SuspendedCubby51 51
L2SDF. SuspendedDrawer54 54
Y1116. PariScreen,HeightAdjustableTables34 34
Y1117. PersonalSideScreen37 37
Y1118. Surface-AttachedScreen,FlatEdge38 38
Y1119. PersonalSideScreen,Rectangular41 41
Y1120. LaminateScreen,SurfaceAttached42 42
Y1130. VistaPrivacy+ModestyScreen-DoubleSided,Height
AdjustableTable45 45
Y1131. VistaModestyScreen-DoubleSided,HeightAdjustable
Table46 46
Y1300. HingedCableTrough32 32
Y1412. LogicMiniGrommet30 30
Y1414. LogicMini28 28
Y1500. PowerPlugStrip31 31
HermanMiller
HermanMiller October 2013
Appendix: 20
-Day or Less/A
ssigned Lead-Time O
rder Information
20-Day or Less/Assigned Lead-Time Order Information
20-Day or Less and Assigned Lead-Time Programs
20-day or less and assigned lead-time products are designed for
established Herman Miller dealers with pre-approved credit.
Products are distributed from multiple manufacturing facilities
across the United States. All products and options not designated by
an Assigned Lead-Time icon A will ship in 20 business days or less
after being acknowledged by Herman Miller. Products and options
designated by an A are on the assigned lead-time program and will
ship in 20 days, less than 20 days, or more than 20 days from order
acknowledgement.
Ordering Procedure
Please place orders through Order Manager. If this is not available to
you, place orders through mail or fax. Verbal purchase orders will not
be accepted.
Order Entry fax number for Passage®, 5000 Series, and Meridian®
Filing and Storage: (616) 846 9236.
Order Entry fax number for all other products:
(616) 654 3085.
For more information, contact your Customer Care representative at:
(866) 854 3048 ext 3400.
Shipments and Delivery
Per Herman Miller Terms and Conditions.
Changes and Cancellation
Per Herman Miller Terms and Conditions.
HermanMiller
HermanMiller May 2015
Appendix: Vary Easy Program
Vary Easy Program
Accessing and Specifying Vary Easy
To view the full product vocabulary, go to the Vary Easy Product
Offering on Kiosk. To specify Vary Easy, go to the Vary Easy 3D website
on Kiosk, specIT, or your third-party text-based specification package.
Once you’ve made your product line selection, continue to
follow through each option and enter the specific options that
represent the product you need. When the product is fully specified,
Vary Easy will generate an orderable product number and instantly
calculate a price.
Note: Failure to completely specify a product will cause a delay in order
acknowledgements. Be sure to make a selection for all options offered.
The acknowledgement process for Vary Easy products is the
same as for any standard order. Vary Easy products ship with a
standardized lead time and are competitively priced.
For more information, contact your Customer Care Line at
(866) 854 3048 ext 3400.
Program Overview
Vary Easy is a program designed to help dealers specify standard
products with a larger breadth of options. For example, depending on
the type of product being specified, choices include additional size,
finish, edge types, and cable management features. Vary Easy 3D,
specIT, and third-party text-based specification packages support the
Vary Easy program. Vary Easy 3D enables designers to create a 3D
image, CAD symbols, and a price book page. A Vary Easy product
number is assigned for each product as the user selects specific
options. Once the product is completely specified, the order can be
submitted via Kiosk’s Order Manager or a dealer’s business system.
HermanMiller
HermanMiller December 2016
Appendix: S
tain-to-Match Program
Stain-to-Match Program
Stain-to-Match Program
Program Overview
The Stain-to-Match program gives you the option of using veneer finishes
that are not listed in the standard offering. The program allows Herman
Miller to match a customer’s existing recut or natural veneer, or create anew finish that is unique to an installation.
Specific information on approval, ordering, pricing, and warranty for the
Stain-to-Match program is listed below. Questions and requests for
assistance may be directed to Herman Miller Options at:
(800) 654 3910
Ordering Products with Stain-to-Match Veneers
1. Fill out the Options Stain-to-Match Request Form and send along
with a color sample (2” x 3” minimum) to the Herman Miller OptionsApplications Team at the address provided on the form. The form
can be found on Omni.
2. Within 7-10 working days, Herman Miller Options will send a sample
of the color-matched stain on Herman Miller veneer to the requester
for the customer’s signed approval.
3. If the sample meets the customer’s approval, sign the reverse sideof the sample, scan and email the approval to:
4. After the stain has been approved, a formal quotation with special
number and pricing can be provided, or the product can be
specified through the Vary Easy program, if available. Work with the
Options team on final product needs and how to specify.
5. A purchase order can then be placed.
Stain-to-Match Warranty
Herman Miller warrants its products to be free from defects in
craftsmanship from the date of delivery for the applicable warranty
period. Herman Miller is responsible for the physical properties of the
veneers available through the Stain-to-Match program, which include:
STA: Stain-to-Match on Recut Ash
STB: Stain-to-Match on Beech
STC: Stain-to-Match on Cherry
STD: Stain-to-Match on Oak
STK: Stain-to-Match on Reltech Anigre (Geiger)
STM: Stain-to-Match on Recut Mahogany
STP: Stain-to-Match on Maple
STU: Stain-to-Match on Walnut (Geiger)
See your specification tool for product specific finish offering limitations.
For more information about our products and services or to see a list of dealers, please visit us at HermanMiller.com or call (800) 851 1196.
© 2020 Herman Miller, Inc., Zeeland, Michigan
Distribution Rights
Working together since 1956, Herman Miller and Vitra are the authentic sources of designs by Charles and Ray Eames, Alexander Girard, and George Nelson. All the designs shown in this book are protected by law. Herman Miller has obtained all rights to make and sell these designs. Also, Herman Miller holds exclusive world-wide manufacturing and distribution rights for these products with the following exceptions:
Charles and Ray Eames, George Nelson, and Alexander Girard—Worldwide distri-bution rights for furniture in all areas except Europe and the Middle East. For those areas, please contact Vitra.
Isamu Noguchi—Worldwide distribution rights for the Noguchi Rudder Table. Distribution rights for the Noguchi Table in North America and Central America only. For all other areas, please contact Vitra.
Magis—Exclusive distribution rights in the US and Canada. For all other areas, please contact Magis.
® Z, Y, 3D Intelligent, AO, Action Office, Aeron, ArcSpan, Aside, Avall, Bubble Lamps, Canvas Office Landscape, Caper, Celle, Co/Struc, Daisyone, Distil, Eames, Eco-Dematerialized, Embody, Envelop, Ethospace, Exclave, Fine-Tune, FlexFront, Flo, Formcoat, Formwork, Ground Cloth, Herman Miller for the Home, Herman Miller for Healthcare, Intersect, Kinemat, Layout Studio, Lifework, Limerick, Live Unframed, Living Office, Locale, Maharam, Meridian, Mirra, Motia, Pellicle, Perspectives, Plex, PostureFit, Public Office Landscape, Resolve, Rodney, Sayl, Setu, Thrive, Tu, Wishbone, and Y-Tower are among the registered trademarks of Herman Miller, Inc., and its owned subsidiaries.
™ 8Z Pellicle, About Face, AireWeave, Albert, Backfit, Bubbletack, Burdick Group, Butterfly Back, Cellular Suspension, Clam, Commend, Compass, Connect, Cosm, DOT, Duracare, Durawrap, Eames Soft Pad, EnhancedAccess, Everywhere, Flex-Edge, Flute, Harmonic, Headway, Herman Miller Select, Hopsak 2, Intent, Iota, Jaw, Keyless Entry, Keyn Chair Group by Herman Miller, Latitude, Lino, Locale, Logic Mini, Logic Power Access Solutions, Live Platform, Loop, Lyris, Lyris 2, Made-to-Measure Storage, Mora, Multiscrim, Nelson, Nevi, Overlay, Pari, Pixelated Support, PostureFit SL, Prospect, Renew, Sense, Soft Pad, Stackable, Stackable Storage, Striad, Swoop, Tone, TriFlex, Twist, Ubi, Valor, Verus, Vista and Wireframe are among the trade-marks of Herman Miller, Inc., and its owned subsidiaries.
SM Herman Miller Options is among the service marks of Herman Miller, Inc.
AAP™ is a trademark of Extron Electronics.
Alexander Girard® is a registered trademark of The Alexander Girard Estate.
Chemsurf® is a registered trademark of Wilsonart International.
Corian® is a registered trademark of E. I. du Pont de Nemours and Company Corporation.
Crypton® is a registered trademark of Crypton, Inc.
DACRON® is a registered trademark of INVISTA S.a r.l.
Danzer® is a registered trademark of Danzer Holding AG.
Decora® is a registered trademark of Leviton Manufacturing Co., Inc.
Edelman® Leather is a registered trademark of Edelman Leather, Inc.
Extron® is a registered trademark of RGB Systems, Inc.
FENIX NTM® is a registered trademark of Arpa Industriale S.p.A.
FLEXNET™ is a trademark of Milliken & Company.
Floor Saver Glide® is a registered trademark of Carpin Manufacturing, Inc.
Geiger® is a registered trademark, and Bumper™, Saiba™, and Ward Bennett™ are trademarks, of Geiger International.
Goetz™ is a trademark of Mark W. Goetz.
Hang-It-All® is a registered trademark of Lucia Eames Demetrios, d.b.a. Eames Office.
Holophane® is a registered trademark of Holophane.
Ingeo™ is a trademark of Cargill Dow LLC.
iPad® is a registered trademark of Apple, Inc.
Leviton® is a registered trademark of Leviton Manufacturing Co., Inc.
LifeSize® is a registered trademark of LifeSize Communications, Inc.
Magis®, Bombo®, and Me Too® are registered trademarks of Magis S.p.A.
Microsoft® and Natural® Keyboard are registered trademarks of Microsoft Corporation.
Noguchi® and the Noguchi table configuration (trade dress) are registered trade-marks, and Rudder Table™ is a trademark, of The Isamu Noguchi Foundation and Garden Museum.
Place Textiles® is a registered trademark of Place Textiles.
SuperSeat™ is a trademark of Dahti Seating, a division of ITW.