pressure gauge cock & accessories · 2020. 11. 7. · m20 x 1.5 & m20 x 1.5. metric threads...
TRANSCRIPT
AN ISO 9001 COMPANY
www.dawsonstech.com
STAINLESS STEEL
PRESSURE
GAUGE COCK &
ACCESSORIES
Most Cost Effective, World Class Quality
Flow Control Solutions for Wide Range
of Industries and Applications
OVER 35 YEARS OF EXPERIENCE
2 www.dawsonstech.com
THE COMPANY
PRESSURE GAUGE COCK SERIES : VGC01 & VGC03
3 www.dawsonstech.com
• Replaceable PTFE Packing design.
• 2 Way design.
• Manufactured from Bar Stock.
• Available in Material SS316L.
• Every Gauge cock is Pressure tested.
Features / Benefits :
• Pressure Rating : ≤ 368 PSIG (25 Bar)
•O Temperature Rating : ≤ 100 C
• End Connections : 1/4" to 1/2" Male / Female
BSP/ BSPT /NPT Pipe Threads
M20 x 1.5 & M20 x 1.5. Metric Threads
Product Range & Operating Parameters :
• Shut-off device for pressure
measuring Instrumentations
for measurement of Liquid,
Gases and Vapours.
Applications :
www.dawsonstech.com
DAWSONS-TECH Pressure Gauge Cock Series : VGC01 & VGC03
are having compact & rugged Bar Stock body design &
construction, which is installed between Pressuer Gaugae and
Pipe which is used to isolate the Pressure Gauge from the
pressure media in order to inspection or replacement of the
Gauge where the pressure is continously pulsating.
Pressure gaugedepressurised (zero position)Supply pipe closed
OperationPressure gaugepressurisedSupply pipe open
Pressure gauge isolatedLiquid escapes
4
Material Of Construction : VGC01
1
2
3
4
5
6
7
Handle
Stem
Packing
Body
Cap
Thrust Bearing
Nut
Phenolic
SS316L
PTFE
SS316L
SS316L
PEEK
Stainless Steel
Sr. No. Description Material
PRESSURE GAUGE COCK SERIES : VGC01 & VGC03
Material Of Construction : VGC03
1
2
3
4
5
6
7
8
Handle
Stem
Packing
Body
Cap
Thrust Bearing
Nut
Swivel Nut
Phenolic
SS316L
PTFE
SS316L
SS316L
PEEK
Stainless Steel
SS316L
Sr. No. Description Material
• Switching between the settings “Operation,
Venting and Blowing-off” should be as per
shown in the illustrations.
• During operations of the Gauge Cock like,
operation at low or extreme temperatures,
re-adjustment of the Cock may be required to
guarantee the tightness.
• Re-adjustment is done by carefully unscrewing
the collar Nut Clock with the help of an
adjustable spanner.
Operation And Maintenance :
Installation :
• The Gauge Cock is to be installed as per
approved installation rules of technology. The
connection to the pipeline is always on the
hexagon side.
• Suitable flat seal has to be installed between
the Gauge Cock and the Pressure Gauge.
• As an alternate, the Pressure Gauge can be
tightened by screwing into the Gauge Cock
with suitable thread sealant.
www.dawsonstech.com
5 www.dawsonstech.com
End ConnectionDawsons-Tech
Part No.
Dimensions in mm
A/FA B C
STANDARD CONFIGURATION DIMENSIONS
1/4" BSP (Male x Female)
1/2" BSP (Male x Female)
1/4" NPT (Male x Female)
1/2" NPT (Male x Female)
M20 x 1.5 (Male x Female)
M22 x 1.5 (Male x Female)
1/4" BSP (Female x Female)
1/2" BSP (Female x Female)
1/4" NPT (Female x Female)
1/2" NPT (Female x Female)
1/4" BSP (Male x Swivel Nut)
1/2" BSP (Male x Swivel Nut)
1/2" BSP x M22 x 1.5 (Male x Swivel Nut)
M20 x 1.5 (Male x Swivel Nut)
M22 x 1.5 (Male x Swivel Nut)
73.0
80.0
73.0
80.0
80.0
80.0
70.0
80.0
70.0
80.0
55.0
80.0
80.0
80.0
80.0
47.0
57.0
47.0
57.0
57.0
57.0
47.0
57.0
47.0
57.0
47.0
57.0
57.0
57.0
57.0
52.0
64.0
52.0
64.0
64.0
64.0
52.0
64.0
52.0
64.0
52.0
64.0
64.0
64.0
64.0
22.0
27.0
22.0
27.0
27.0
27.0
22.0
27.0
22.0
27.0
22.0
27.0
27.0
27.0
27.0
VGC01-MF4G
VGC01-MF8G
VGC01-MF4N
VGC01-MF8N
VGC01-MF20M
VGC01-MF22M
VGC01-FF4RG
VGC01-FF8RG
VGC01-FF4N
VGC01-FF8N
VGC03-MSN4G
VGC03-MSN8G
VGC03-M8G-22M
VGC03-MSN20M
VGC03-MSN22M
PRESSURE GAUGE COCK SERIES : VGC01 & VGC03
VGC01 VGC03
PRESSURE GAUGE COCK SERIES : VGC11 & VGC13(Stem with Live Load System)
6 www.dawsonstech.com
• Replaceable PTFE Packing design.
• 2 Way design.
• Manufactured from Bar Stock.
• Available in Material SS316L.
• Every Gauge cock is Pressure tested.
Features / Benefits :
• Pressure Rating : ≤ 368 PSIG (25 Bar)
•O Temperature Rating : ≤ 100 C
• End Connections : 1/4" to 1/2" Male / Female
BSP/ BSPT /NPT Pipe Threads
M20 x 1.5 & M20 x 1.5. Metric Threads
Product Range & Operating Parameters :
• Shut-off device for pressure
measuring Instrumentations
for measurement of Liquid,
Gases and Vapours.
Applications :
www.dawsonstech.com
DAWSONS-TECH Pressure Gauge Cock Series : VGC11 & VGC13
are having compact, rugged & Live Loaded Stem design &
construction, which is installed between Pressuer Gaugae and
Pipe which is used to isolate the Pressure Gauge from the
pressure media in order to inspection or replacement of the
Gauge where the pressure is continously pulsating.
1
2
3
4
5
6
7
8
Handle
Stem
Packing
Body
Cap
Spring
Thrust Bearing
Nut
Phenolic
SS316L
PTFE
SS316L
SS316L
Stainless Steel
PEEK
Stainless Steel
Sr. No. Description Material
7 www.dawsonstech.com
• Switching between the settings “Operation,
Venting and Blowing-off” should be as per
shown in the illustrations.
• With Live Loading Stem in place, there will be
no re-adjustment required during its
operations at low or extreme tempreture.
However, if at all required, slight re-adjustment
of Cock can be done by carefully screwing the
Nut which will re-ensure tightness guarantee.
PRESSURE GAUGE COCK SERIES : VGC11 & VGC13(Stem with Live Load System)
Pressure gaugedepressurised (zero position)Supply pipe closed
OperationPressure gaugepressurisedSupply pipe open
Pressure gauge isolatedLiquid escapes
Material Of Construction : VGC11
Material Of Construction : VGC13
1
2
3
4
5
6
7
8
9
Handle
Stem
Packing
Body
Cap
Thrust Bearing
Spring
Nut
Swivel Nut
Phenolic
SS316L
PTFE
SS316L
SS316L
PEEK
Stainless Steel
Stainless Steel
SS316L
Sr. No. Description Material
Operation And Maintenance :
Installation :
• The Gauge Cock is to be installed as per
approved installation rules of technology. The
connection to the pipeline is always on the
hexagon side.
• Suitable flat seal has to be installed between
the Gauge Cock and the Pressure Gauge.
• As an alternate, the Pressure Gauge can be
tightened by screwing into the Gauge Cock
with suitable thread sealant.
8 www.dawsonstech.com
End ConnectionDawsons-Tech
Part No.
Dimensions in mm
A/FA B C
STANDARD CONFIGURATION DIMENSIONS
1/4" BSP (Male x Female)
1/2" BSP (Male x Female)
1/4" NPT (Male x Female)
1/2" NPT (Male x Female)
M20 x 1.5 (Male x Female)
M22 x 1.5 (Male x Female)
1/4" BSP (Female x Female)
1/2" BSP (Female x Female)
1/4" NPT (Female x Female)
1/2" NPT (Female x Female)
1/4" BSP (Male x Swivel Nut)
1/2" BSP (Male x Swivel Nut)
1/2" BSP x M22 x 1.5 (Male x Swivel Nut)
M20 x 1.5 (Male x Swivel Nut)
M22 x 1.5 (Male x Swivel Nut)
73.0
80.0
73.0
80.0
80.0
80.0
70.0
80.0
70.0
80.0
55.0
80.0
80.0
80.0
80.0
47.0
57.0
47.0
57.0
57.0
57.0
47.0
57.0
47.0
57.0
47.0
57.0
57.0
57.0
57.0
52.0
64.0
52.0
64.0
64.0
64.0
52.0
64.0
52.0
64.0
52.0
64.0
64.0
64.0
64.0
22.0
27.0
22.0
27.0
27.0
27.0
22.0
27.0
22.0
27.0
22.0
27.0
27.0
27.0
27.0
VGC11-MF4G
VGC11-MF8G
VGC11-MF4N
VGC11-MF8N
VGC11-MF20M
VGC11-MF22M
VGC11-FF4RG
VGC11-FF8RG
VGC11-FF4N
VGC11-FF8N
VGC13-MSN4G
VGC13-MSN8G
VGC13-M8G-22M
VGC13-MSN20M
VGC13-MSN22M
PRESSURE GAUGE COCK SERIES : VGC11 & VGC13(Stem with Live Load System)
VGC11 VGC13
ORDERING INFORMATION
PackingMaterialEnd Connection
Type
VGC01
1
Gauge Cock
Series
End Connection
Size
Pipe Thread
Type
For Example : Part No. VGC01-FF8N-SST
FF
2
8
3
N
4
P
6
SSL
5
9
PRESSURE GAUGE COCK SERIES : VGC01
P : PTFE6) Packing
OUR PLEDGE
DAWSONS-TECH is self-committed for continuous
development and upgradation of its products to meet the
growing demands for Industries requirements of Flow Control
Components by advanced technology induction and cutting-
edge solution which is in-line with focused objective mission
“TO PROVIDE OUR CUSTOMERS
WITH
CONSISTENT RELIABLE QUALITY PRODUCTS
AT
RIGHT TIME & COMPETITIVE PRICE”
2) End Connection Type
FF : Female x Female
MF : Male x Female
MSN : Male x Swivel Nut
5) MaterialSSL : SS316L
SST : SS316Ti
Pipe Thread Type
N : NPT
RT : BSPT
G : BSP (Male x Female
RG : BSP (Female)
4)
www.dawsonstech.com
Gauge Cock Series
VGC01
VGC03
VGC11
VGC13
1)
1/4”
3/8”
1/2”
M20 x 1.5
M22 x 1.5
4
6
8
20M
22M
3) End Connection Size
Fractional
Metric
10
ACCESSORIES
Compact Gauge Syphons
www.dawsonstech.com
DAWSONS-TECH Compact Gauge Syphon is designed and manufactured to be used instead of the Coil Syphon
for vertical installations which protects the pressure Gauge from the effect of hot pressure media such as Steam
and also reduce the effect of rapid pressure surges. Available in SS316 Material. order to inspection or
replacement of the Gauge where the pressure is continously pulsating.
Pressure Rating : UPTO 6000 PSIG (413 Bar)
Compact Gauge Syphon Compact Gauge Syphon (With Swivel Nut)
Swivel Nut
DAWSONS-TECH Swivel Nut is designed according to DIN 16283 having a right-hand thread (RH) on one side and
left-hand thread (LH) on the other side to install the parts in any required direction. Available in SS316 Material.
End Connection Dawsons-Tech
Part No.
Dimensions in mm
A A/F
STANDARD CONFIGURATION DIMENSIONS
1/4" BSP (RH)
1/2" BSP (RH)
M20 X 1.5 (RH)
1/2" BSP (RH)
23.0
36.0
36.0
36.0
17.0
27.0
27.0
27.0
SN-4RG
SN-8RG
SN-20M
SN-8G-20M
P1 P2
1/4" BSP (LH)
1/2" BSP (LH)
M20 X 1.5 (LH)
M20 X 1.5 (LH)
Dimensions are for reference only and are subject to change.
End Connection Dawsons-Tech
Part No.
Dimensions in mm
A/F2A A/F1
STANDARD CONFIGURATION DIMENSIONS
1/4" BSP (Male)
1/2" BSP (Male)
1/4" NPT (Male)
1/2" NPT (Male)
100.0
120.0
80.0
110.0
17.0
27.0
19.0
27.0
19.0
27.0
-
-
CGS-4G-4SN
CGS-8G-8SN
CGS-4N
CGS-8N
P1 P2
1/4" BSP (Swivel Nut)
1/2" BSP (Swivel Nut)
1/4" NPT (Female)
1/2" NPT (Female)
Dimensions are for reference only and are subject to change.
11
ACCESSORIES
Gauge Adapter (DIN 16281)
www.dawsonstech.com
DAWSONS-TECH Gauge Adapter is designed according to DIN 16281. Available in SS316 Material.
End Connection Dawsons-Tech
Part No.
Dimensions in mm
A
1/4" BSP
1/2" BSP
1/4" NPT
1/2" NPT
65.0
75.0
65.0
75.0
A/F
19.0
27.0
19.0
27.0
GAC-4RG
GAC-8RG
GAC-4N
GAC-8N
P1 P2
1/4" BSP
1/2" BSP
1/4" NPT
1/2" NPT
Dimensions are for reference only and are subject to change.
STANDARD CONFIGURATION DIMENSIONS
Female to Male Gauge Adapters
DAWSONS-TECH Female to Male Gauge Adapters are designed and manufactured to connect Male and Female
thread connection. Available in SS316 Material.
End Connection Dawsons-Tech
Part No.
Dimensions in mm
A A/F
STANDARD CONFIGURATION DIMENSIONS
1/4" BSP (Female)
1/2" BSP (Female)
1/2” BSP (Female)
1/2" NPT (Female)
33.0
43.0
45.0
50.0
22.0
27.0
27.0
27.0
FMGA-4RG-8G
FMGA-8RG-4G
FMGA-8RG-8N
FMGA-8N-8G
P1 P2
1/2" BSP (Male)
1/4" BSP (Male)
1/2" NPT (Male)
1/2" BSP (Male)
Dimensions are for reference only and are subject to change.
B
30.0
30.0
30.0
30.0
12
ACCESSORIES
Male To Male Adapters
www.dawsonstech.com
DAWSONS-TECH Male to Male Adapters are designed and manufactured to connect Female threads. Available in
SS316 Material.
Male to Male Adapter (BSP to BSP) Male to Male Adapter (BSP to NPT)
End Connection Dawsons-Tech
Part No.
Dimensions in mm
A A/F
STANDARD CONFIGURATION DIMENSIONS
1/4" BSP
1/2" BSP
1/4" BSP
1/4" BSP
1/4" BSP
1/4" BSP
1/2" BSP
34.0
50.0
45.0
34.0
45.0
34.0
50.0
14.0
22.0
22.0
14.0
22.0
14.0
22.0
MMA-4G-4G
MMA-8G-8G
MMA-4G-8G
MMA-4G-4N
MMA-4G-8N
MMA-4N-4N
MMA-8N-8N
P1 P2
Dimensions are for reference only and are subject to change.
1/4" BSP
1/2" BSP
1/2" BSP
1/4" NPT
1/2" NPT
1/4" NPT
1/2" NPT
Sealing Washer (EN837-1)
DAWSONS-TECH Sealing Washers are used for Parallel Male Thread in accordance with EN 837-1. Available in
SS316 Material.
For Thread Dawsons-Tech
Part No.
Dimensions in mm
B C
STANDARD CONFIGURATION DIMENSIONS
1/4" BSP
3/8" BSP
1/2" BSP
M20 X 1.5
5.2
5.7
6.2
6.2
9.5
13.0
17.5
17.5
SW-4G
SW-6G
SW-8G
SW-20M
A
1.5
2.0
2.0
2.0
Dimensions are for reference only and are subject to change.
NOTE : Male to Male Adapters having length 76.2mm and 101.6mm are available on request.
13
ACCESSORIES
www.dawsonstech.com
Gauge Snubber
DAWSONS-TECH Gauge Snubbers are used to reduce the effect of pressure surges on the instrument and also to
improve the output of the instrument. Available in SS316 Material.
Operating Parameters :
Pressure Rating : 6000 PSIG (413 Bar)OTemperature Rating : 60 C
STANDARD CONFIGURATION DIMENSIONS
End Connection Dawsons-Tech
Part No.
Dimensions in mm
A A/F
1/4" BSP (Male)
3/8" BSP (Male)
1/2" BSP (Male)
1/4" NPT (Male)
1/2" NPT (Male)
M20 x 1.5 (Male)
61.0
61.0
61.0
61.0
61.0
61.0
27.0
27.0
27.0
27.0
27.0
27.0
SNB-4G
SNB-6G
SNB-8G
SNB-4N
SNB-8N
SNB-20M
P1 P2
Dimensions are for reference only and are subject to change.
1/4" BSP (Female)
3/8" BSP (Female)
1/2" BSP (Female)
1/4" NPT (Female)
1/2" NPT (Female)
M20 x 1.5 (Female)
14 www.dawsonstech.com
OUR COMPREHENSIVE PRODUCT LINE
37° Flare Fittings / BSP 60° Cone Fittings Precision Threaded / Socket /
Butt Weld Pipe Fittings & Adapters
High Pressure Ball Valves Check Valves
Quick Connect Couplings to ISO 16028 & ISO 7241-1 Series B Customized Fittings and Valves
Instrumentation Valves
Wellhead Grease / Bleed Fittings
& Components
High Purity Fittings
Gauge Cock & Accessories
15 www.dawsonstech.com
Unit No. DD - 6 & 7, Khan Real Industrial Estate,
N. H. 08, Pelhar, Vasai Phata, Vasai (East),
Dist. Palghar - 401 208, Maharashtra, India.
Mobile : +91-9833355596
Email : [email protected]
Website: www.dawsonstech.com
LLPIN: AAN-0434
Catalogue No. VGC-19
DAWSONS-TECH COMPONENTS LLP