press information hamburg - dinse...
TRANSCRIPT
DINSE G.m.b.H. . Tarpen 36 . 22419 Hamburg . Tel: +49-(0)40-658 75-0 . Fax: -200 . [email protected] . www.dinse-gmbh.com
W E L D I N GS C H W E I S S E N W E L D I N GS C H W E I S S E N S C H W E I S S E N
Press Information
DINSE REVO.torchPerfection in robot welding – all-inclusive
Hamburg – North German manufacturer DINSE uses a most impressive technology for itsREVO.torch welding system: the welding equipment is no longer guided in the conventional way,outside the robot arm, but internally. This not only prolongs operating life but also permits thewelding torch to be turned without restriction, so that welding is simplified even at points whereaccess is difficult.
This impressed CLAAS, the agricultural machinery manufacturer based in Harsewinkel. CLAASuses DINSE equipment on its production lines. The Hamburg supplier’s prime objective whenfinalising the technological concept of REVO.torch was to offer the user a complete system includingwelding torch and equipment as well as the wire feed.
The unrestricted rotating movement provided by the DINSE principle, which conducts the weldingcurrent, the shield gas and the compressed air from the torch set to the torch head, is backed byfurther product advantages, above all the torch set, which can be separated on wire feeder androtating interface and which operates entirely without imposing torsional loads. The company’sspecialist engineers have gone to great lengths to retain the well-established quality features ofDINSE systems, such as the high-powered wire feeder, which operates at a uniform torque levelto ensure consistent wire feed over the entire speed range, or the separate shield gas supplywhich avoids gas losses.
The integral air blast technique, which counteracts premature system contamination and helps tomaintain its full availability, and the reliable reproducibility of the TCP are also features that confirmthe systematic development approach that has resulted in the DINSE REVO.torch. This includesthe standardised DINSE torch head interface at the rotating interface, which simplifies attachmentof the new swan-neck pattern gas-cooled torch head and also permits changeover to existingDINSE heads. Further evidence of this systematic approach is the policy regarding parts subjectto wear: DINSE stocks identical components for various torch heads. And since REVO.torch turnswillingly but is most reluctant to bend, integral crash protection with a deflection range of up to15 degrees protects both the tool and the robot reliably.
DINSE G.m.b.H. . Tarpen 36 . 22419 Hamburg . Tel: +49-(0)40-658 75-0 . Fax: -200 . [email protected] . www.dinse-gmbh.com
W E L D I N GS C H W E I S S E N W E L D I N GS C H W E I S S E N S C H W E I S S E N
The company founded in Hamburg by Wilhelm Dinse in 1954 is today one of the leading companies for weldingand brazing systems in Europe. DINSE systems are used in the automotive and general vehicle industry, aircraftconstruction, agricultural engineering, in the construction of machines, plants and structural steel works, as wellas in traditional shipbuilding. In addition to traditional manual welding systems, DINSE has developed automaticand robotic welding devices for many years. Based on standard components, DINSE systematically builds differentsystem solutions. DINSE has users with technologically exacting demands in all areas of application, be it MIG/MAG,TIG, PLASMA or LASER welding and brazing.
The DINSE REVO.torch exemplary used for Motoman-EA 1400/1900 N robot.
Photo: DINSE G.m.b.H., Hamburg