Presented by Composites One in Partnership with IACMI

August 9-10, 2016 • Indiana Manufacturing Institute • West Lafayette, IN

Workshop Address:

Indiana Manufacturing Institute1105 Challenger AvenueWest Lafayette, IN 47906

(765) 494-4437

Please join us for a networking reception and supper by the bite at Purdue University - Ross Ade Pavilion.

Ross Ade Pavilion - Shively Club South 850 Beering Drive

West Lafayette, IN 47907(765) 746-5199

P2P Composites is Proudly Sponsored By:

P2P Composites is Presented By:

Tuesday, August 9

8:00 a.m. Welcome: Leon Garoufalis, President and COO, Composites One; Dr. R. Byron Pipes, John L. Bray - Distinguished Professor of Engineering, Purdue University; and IACMI Technology Area Director

8:30 a.m. Virtual Composites: The Value of Modeling and Simulation to Fabricators The Composites Virtual Factory HUB (cvfHUB): Simulating Composites Processes Presented By: Dr. R. Byron Pipes, John L. Bray - Distinguished Professor of Engineering, Purdue University; and IACMI Technology Area Director Composite Part Design & Modeling Tool Box for Rapid Application Development Presented By: Dr. Amol Vaidyam, Global Innovation Leader, Owens Corning and Dr. Gajendra Pandey, Senior Engineer, Owens Corning Using Laminate Design and Analysis Software for Optimized Composites Structures Presented By: Trevor Gundberg, P.E., Director of Composites Engineering , Vectorply Corp

9:30 a.m. Session Previews Session 1: Vacuum Infusion Presented By: Neil Smith, Technical Support Manager, Composites One; Russ Elkin, Senior Technical Service Engineer, 3A Baltek; Trevor Gundberg, Director of Composites Engineering, Vectorply; and Jeff Wright, Technical Director, Gougeon Brothers, Inc. Location : Raisbeck Engineering Composites Laboratory Session 2: Reusable Vacuum Bags for Vacuum Infusion Presented By: Jim Noonan, Technical Support Manager, Composites One and Larry Audette, President, SWORL Location : Wet Layup Lab

Session 3: Advances in Tooling Presented By: Dan Alter, Advanced Composites Sales Specialist, Composites One; Brent Schubring, Strategic Account and Business Development Manager, SikaAxson Urethane Vacuum Casting; Sam Gorton, Market Development Manager, Soul Composites - GURU Rapid Tooling; and Vlastimil Kunc, Group Leader, Polymer Materials Development, ORNL Location: CNC Lab and Additive Manufacturing Lab

Session 4: Composite Testing and Characterization Presented By: Dr. Johnathan Goodsell, Director of Validation, Composites Manufacturing and Simulation Center, Purdue University Location: Composites Characterization Lab

10:00 a.m. MORNING CONCURRENT SESSIONS

11:00 a.m. 15 Minute Break

12:15 p.m. Luncheon Speaker Labor-less Prototype Tooling Leigh Sargent, President and Founder of Applied Composites Engineering

Your Workshop Agenda

Morning Session 110:00 a.m. - 11:00 a.m.

Morning Session 211:15 a.m. - 12:15 p.m.

AfternoonSession 11:30 p.m. - 2:30 p.m.

AfternoonSession 22:45 p.m. - 3:45 p.m.

Group 1

Group 2

Group 3

Group 4

1:30 p.m. AFTERNOON CONCURRENT SESSIONS

2:30 p.m. 15 Minute Break

4:00 p.m. Equipping Yourself for Success Presented By: Andrew Hedger, Product Line Manager of Closed Molding, Magnum Venus Products

4:30 p.m. Day 1 Wrap Up Review / Q&A and Review Day 2 Agenda

6:00 p.m. Networking Reception: Join us for a networking reception and supper by the bite at Purdue University - Ross Ade Pavilion. Ross Ade Pavilion - Shively Club South 850 Beering Drive West Lafayette, IN 47907 (765) 746-5199

Wednesday, August 10

8:00 a.m. Welcome and Review Agenda

8:15 a.m. How To Use the Resources at IACMI and Indiana Manufacturing Institute Presented By: Ronald Steuterman, Managing Director, IN-MaC & Purdue IACMI

8:30 a.m. Infrastructure Case Study: Adhesively Bonded Composite Wharfs and Docks for Hurricane Cat 3 Conditions Presented By: Stuart La Haise, Sales Representative, Engineered Bonding Solutions

9:00 a.m. Session Previews for Day 1

Session 5: Prepregs and Thermoplastic Fibers for Compression Molding Presented By: Joe Pantalone, Advanced Composites Product Manager, Composites One; Will Ricci, Technical - Americas, Gurit; and Al Hollenbeck, Chief Operating Officer, Concordia Fibers Location: Molding Lab

Session 6: LRTM Production Molding Cell Presented By: Doug Smith, President, RTM North; Travis Irvin, Sales Manager, Chomarat; Rick Pauer, Applications Manager, Polynt; and Sam Dethloff, Aerospace & Composites Industry Technical Manager, Chem-Trend Location : Raisbeck Engineering Composites Laboratory

9:30 a.m. MORNING CONCURRENT SESSIONS

10:30 a.m. 15 Minute Break

11:45 a.m. Day 2 Wrap Up Review and Q&A

12:00 a.m. Lunch

Tuesday, August 9

8:00 a.m. Welcome: Leon Garoufalis, President and COO, Composites One; Dr. R. Byron Pipes, John L. Bray - Distinguished Professor of Engineering, Purdue University; and IACMI Technology Area Director

8:30 a.m. Virtual Composites: The Value of Modeling and Simulation to Fabricators The Composites Virtual Factory HUB (cvfHUB): Simulating Composites Processes Presented By: Dr. R. Byron Pipes, John L. Bray - Distinguished Professor of Engineering, Purdue University; and IACMI Technology Area Director Composite Part Design & Modeling Tool Box for Rapid Application Development Presented By: Dr. Amol Vaidyam, Global Innovation Leader, Owens Corning and Dr. Gajendra Pandey, Senior Engineer, Owens Corning Using Laminate Design and Analysis Software for Optimized Composites Structures Presented By: Trevor Gundberg, P.E., Director of Composites Engineering , Vectorply Corp

9:30 a.m. Session Previews Session 1: Vacuum Infusion Presented By: Neil Smith, Technical Support Manager, Composites One; Russ Elkin, Senior Technical Service Engineer, 3A Baltek; Trevor Gundberg, Director of Composites Engineering, Vectorply; and Jeff Wright, Technical Director, Gougeon Brothers, Inc. Location : Raisbeck Engineering Composites Laboratory Session 2: Reusable Vacuum Bags for Vacuum Infusion Presented By: Jim Noonan, Technical Support Manager, Composites One and Larry Audette, President, SWORL Location : Wet Layup Lab

Session 3: Advances in Tooling Presented By: Dan Alter, Advanced Composites Sales Specialist, Composites One; Brent Schubring, Strategic Account and Business Development Manager, SikaAxson Urethane Vacuum Casting; Sam Gorton, Market Development Manager, Soul Composites - GURU Rapid Tooling; and Vlastimil Kunc, Group Leader, Polymer Materials Development, ORNL Location: CNC Lab and Additive Manufacturing Lab

Session 4: Composite Testing and Characterization Presented By: Dr. Johnathan Goodsell, Director of Validation, Composites Manufacturing and Simulation Center, Purdue University Location: Composites Characterization Lab

10:00 a.m. MORNING CONCURRENT SESSIONS

11:00 a.m. 15 Minute Break

12:15 p.m. Luncheon Speaker Labor-less Prototype Tooling Leigh Sargent, President and Founder of Applied Composites Engineering

Your Workshop Agenda

1:30 p.m. AFTERNOON CONCURRENT SESSIONS

2:30 p.m. 15 Minute Break

4:00 p.m. Equipping Yourself for Success Presented By: Andrew Hedger, Product Line Manager of Closed Molding, Magnum Venus Products

4:30 p.m. Day 1 Wrap Up Review / Q&A and Review Day 2 Agenda

6:00 p.m. Networking Reception: Join us for a networking reception and supper by the bite at Purdue University - Ross Ade Pavilion. Ross Ade Pavilion - Shively Club South 850 Beering Drive West Lafayette, IN 47907 (765) 746-5199

Wednesday, August 10

8:00 a.m. Welcome and Review Agenda

8:15 a.m. How To Use the Resources at IACMI and Indiana Manufacturing Institute Presented By: Ronald Steuterman, Managing Director, IN-MaC & Purdue IACMI

8:30 a.m. Infrastructure Case Study: Adhesively Bonded Composite Wharfs and Docks for Hurricane Cat 3 Conditions Presented By: Stuart La Haise, Sales Representative, Engineered Bonding Solutions

9:00 a.m. Session Previews for Day 1

Session 5: Prepregs and Thermoplastic Fibers for Compression Molding Presented By: Joe Pantalone, Advanced Composites Product Manager, Composites One; Will Ricci, Technical - Americas, Gurit; and Al Hollenbeck, Chief Operating Officer, Concordia Fibers Location: Molding Lab

Session 6: LRTM Production Molding Cell Presented By: Doug Smith, President, RTM North; Travis Irvin, Sales Manager, Chomarat; Rick Pauer, Applications Manager, Polynt; and Sam Dethloff, Aerospace & Composites Industry Technical Manager, Chem-Trend Location : Raisbeck Engineering Composites Laboratory

9:30 a.m. MORNING CONCURRENT SESSIONS

10:30 a.m. 15 Minute Break

11:45 a.m. Day 2 Wrap Up Review and Q&A

12:00 a.m. Lunch

Morning Session 19:30 a.m. - 10:30 a.m.

Morning Session 210:45 a.m. - 11:45 a.m.

Group 1

Group 2