SIX MONTHS INDUSTRIAL TRAINING

AT

1. Was founded in 1883 & it is a Multinational Corporation, headquartered in Switzerland.

2. Operates in two divisions:

I. Power Technology Division.

ii. Automation Technology Division.

Pilot Project Of ‘GIS Mapping Of Electrical Distribution Network Using GPS’

Mapping Of 11 kv Urban Phase-1 Feeder in Mohali.

Consumer Indexing

GIS (GLOBAL INFORMATION SYSTEM)

Computer Based Tool for Mapping & Analyzing Features Present on Earth.

System used for Land Planning, Mapping Of Roads, Railway Lines, Electrical Transmission & Distribution Networks etc.

Job of This System is To collect Every Information.

Components Of GIS

Hardware.

Software.

i) Layering

Data.

i) Digital Maps

Areas Of Application

Planning. Street Network. Natural Resource. View Shed Analysis. Land Parcel Based. Facilities Management.

GPS(Global Positioning System) Satellite Based Navigation, timing &

Positioning System.

Provides Continues 3-D Positioning Throughout the world.

Applications in GIS data Collection, Surveying & Mapping.

The Present Power Condition

Total energy Shortage is 8% the total energy demand.

Peak shortage is 13% of the peak demand. Due to distribution losses,poor voltage

condition study Is essential. Utilities facing loss (20,000 crores annualy) Need of GIS is There.

Role Of GIS in Distribution Reforms 100% Consumer Metering & AMR. Meters At all Transformation Stages. Feeder And DT Metering. Effective MIS. Total Energy Accounting. Installation of Small, Energy efficient Dt’s. Digital Mapping of Distribution System.

GIS Help In Achieving Above Reforms Creation Of Consumer Database &

Consumer Indexing. Mapping Of Sub-Transmission & Distribution

Network. Load Flow Studies. Load Forecasting. MIS (Management Information System).

Procedure of Electrical Network Mapping Using GIS1. Base Map & Geo Coding

i. Base Map Collection.

ii.collection Of Ground Control Points Using GPS.

iii. Geo-Coding Of Base Map w.r.t Control Points.

2. 11 KV Feeder Survey from Sub-Station to end Consumer.

i) Creation Of Sketch

3. LT Circuit Survey

i) GPS Survey Of Transformers.

ii) Creation Of SLD of Transformer LT Circuit.

4. Pole Painting

i) Painting as per code Generated.

5. Consumer Survey

i) Door-to-Door Survey.

ii) Generation Of GIS Consumer Database

6. Hardware Delievery

Thus, GIS Helps In Improved Load Management, Loss reduction, Better Revenue Realization, asset & work Management

THANK YOU