presentation - enmanuel pornillo
DESCRIPTION
MoraTRANSCRIPT
7/17/2019 Presentation - Enmanuel Pornillo
http://slidepdf.com/reader/full/presentation-enmanuel-pornillo 1/28
La Aplicación de Relaves Desaguados
Disposición en Superficie y en Minado Subterránea
Diseños y Experiencias recientes
en Perú
Emmanuel Pornillos
CONGRESO MINER NORTE 2013
Ciudad Trujillo
Perú
7/17/2019 Presentation - Enmanuel Pornillo
http://slidepdf.com/reader/full/presentation-enmanuel-pornillo 2/28
IntroducciónEvaluación de los depósitos existentes de relaves y rocas requiere una caracterizacióndetallada del material. Y, antes de iniciar el diseño del sistema de almacenamiento, es
esencial de caracterizar el material a depositar en la relavera, o al tajo a rellenar, y elcomo va a comportar la instalación construida.
El desarrollo de la técnica de deposición de relaves bien desaguados, sea relavesespesados, filtrados o pasta de relleno cementada requiere a la ves de laconsideración apropiada en cualquier planeación para una nueva mina, o la extensiónde la misma. El método de relaves espesado fue desarrollado por Robinsky en 1975
quien identifico que espesando el relave podría crear una pulpa que no se segrega, yuna playa de mayor pendiente. El resultado es la eliminación, o la disminuciónsignificativa del tamaño o volumen de muro de contención. Hay ventajas obvias.
El uso de relaves espesados resultaría a una revisión total del perfil de riesgo deldeposito, y podría dar a reducción significativa del costo de proyecto y el consumo deagua. Sin embargo, existen factores específicos de sitio que impacta en la seleccióndel “mejor” esquema de manejo de relaves para un sitio. El esquema Relave
Espesado no siempre es lo mejor: sin embargo, cualquier estudio que omita laconsideración del método tendrá el riesgo en fallar en identificar la opción mas efectivaen costo.
Vamos al grano
7/17/2019 Presentation - Enmanuel Pornillo
http://slidepdf.com/reader/full/presentation-enmanuel-pornillo 3/28
TECNOLOGIA DE RELAVESESPESADOS
.
7/17/2019 Presentation - Enmanuel Pornillo
http://slidepdf.com/reader/full/presentation-enmanuel-pornillo 4/28
Diagrama de bloquesDisposición de relaves cicloneado
7/17/2019 Presentation - Enmanuel Pornillo
http://slidepdf.com/reader/full/presentation-enmanuel-pornillo 5/28
Diagrama de bloques Agua recuperada
7/17/2019 Presentation - Enmanuel Pornillo
http://slidepdf.com/reader/full/presentation-enmanuel-pornillo 6/28
Elaborar diseños de las instalaciones:
Presa de arena de relaves cicloneados. Planta de desulfurado.
Estación de ciclones.
Transporte de relaves.
Recuperación de agua.
Planta de Espesado.
Planta de Pasta.
Objetivos y Alcances
7/17/2019 Presentation - Enmanuel Pornillo
http://slidepdf.com/reader/full/presentation-enmanuel-pornillo 7/28
Vista del sitio
BOMBEO DE AGUARECUPERADA Y DILUCIÓN
7/17/2019 Presentation - Enmanuel Pornillo
http://slidepdf.com/reader/full/presentation-enmanuel-pornillo 8/28
Sección de la presa de relaves
7/17/2019 Presentation - Enmanuel Pornillo
http://slidepdf.com/reader/full/presentation-enmanuel-pornillo 9/28
Transporte por bombeo y tuberia al
depósito de relaves
Esquemático de un plan de disposición con multi-spigots
7/17/2019 Presentation - Enmanuel Pornillo
http://slidepdf.com/reader/full/presentation-enmanuel-pornillo 10/28
10
Relaves desaguado a consistencia de pasta
7/17/2019 Presentation - Enmanuel Pornillo
http://slidepdf.com/reader/full/presentation-enmanuel-pornillo 11/28
7/17/2019 Presentation - Enmanuel Pornillo
http://slidepdf.com/reader/full/presentation-enmanuel-pornillo 12/28
.
7/17/2019 Presentation - Enmanuel Pornillo
http://slidepdf.com/reader/full/presentation-enmanuel-pornillo 13/28
TECNOLOGIA DE RELAVES EN PASTA
.
7/17/2019 Presentation - Enmanuel Pornillo
http://slidepdf.com/reader/full/presentation-enmanuel-pornillo 14/28
Tajos para rellenar 15 m ancho x 100 m x 30 altura.
DIAGRAMA DE RELLENO EN PASTA
Paste
Plant
Tuberia distribucion relleno en pasta
7/17/2019 Presentation - Enmanuel Pornillo
http://slidepdf.com/reader/full/presentation-enmanuel-pornillo 15/28
15
Depositacion de Relleno en Pasta
mina subterranea
.
7/17/2019 Presentation - Enmanuel Pornillo
http://slidepdf.com/reader/full/presentation-enmanuel-pornillo 16/28
Tajos 100 m L x 10-15 m W x 50 m H.The exposed section is 50 m x 10 m to 50 m x 15 m. The quality of thebackfill is the result of a high percentage 40% (-) 20 microns fines as shownin Figure 4, and the mix recipe consisting of Portland cement and slag. Thepaste at 200 mm slump and 73.5% solids has a density of 1860 kg percubic meter.The strength of placed backfill is a UCS 300 to 410 kPa at 28-day cure. Innarrow vein workings, stope dimension is 60 m L x 3 m W x 25 m H. TheUCS requirement is 70 to 110 kPa
.
7/17/2019 Presentation - Enmanuel Pornillo
http://slidepdf.com/reader/full/presentation-enmanuel-pornillo 17/28
,
.
Estudio de Caso:
Acarreo de mineral
Acarreo de relaves
7/17/2019 Presentation - Enmanuel Pornillo
http://slidepdf.com/reader/full/presentation-enmanuel-pornillo 18/28
TECNOLOGIA DE RELAVES
FILTRADOS
DEPOSICION EN SUPERFICIE
MILPO CERRO LINDO
.
7/17/2019 Presentation - Enmanuel Pornillo
http://slidepdf.com/reader/full/presentation-enmanuel-pornillo 19/28
7/17/2019 Presentation - Enmanuel Pornillo
http://slidepdf.com/reader/full/presentation-enmanuel-pornillo 20/28
Relave tipo A
R e s i s t e n c i a a l a F l u e n c i a
( P
a )
% Sólidos
7/17/2019 Presentation - Enmanuel Pornillo
http://slidepdf.com/reader/full/presentation-enmanuel-pornillo 21/28
.
C O M P R E S S I O N R E S I S T A N C E
k P a
CURE TIME DAYS
COMPRESSION TESTS
Note: % means the amount of water released as percentage initial water
SAMPLES TAKEN
09 DIC. 2011
Time hours
W % T o t a l W
a t e r
7/17/2019 Presentation - Enmanuel Pornillo
http://slidepdf.com/reader/full/presentation-enmanuel-pornillo 22/28
GRACIAS
7/17/2019 Presentation - Enmanuel Pornillo
http://slidepdf.com/reader/full/presentation-enmanuel-pornillo 23/28
7/17/2019 Presentation - Enmanuel Pornillo
http://slidepdf.com/reader/full/presentation-enmanuel-pornillo 24/28
.
The design objectives were accomplished several ways,namely:
Production of thickened tailings to 60% solids from 10%solids in feed, 110 tph dry solids.Filtered cake at moisture content equivalent to less than the7.5” slump, allowing the control of the slump within the
desired range, after the addition of dry binders and water;
cemented paste being75% solids consistency.Slag material as partial substitute to Portland cement;ground slag is produced from the slag wastes of the mine’s
affiliate tin concentrate smelter.
Backfill of the old stopes and recovery of ore pillars (old andrecent ones).Disposition 82% of the total tailings as paste backfill, andthe balance % as thickened tailings to surface.Reductions of the waste rock disposal to surface as theresult of co-disposal with the paste fill.
7/17/2019 Presentation - Enmanuel Pornillo
http://slidepdf.com/reader/full/presentation-enmanuel-pornillo 25/28
The application of cemented paste backfill technology sawcontinuing improvement since the first system was placed in
operation in the high Andes in late 1990
s. For, in 2001 the San
Rafael mine applied the technology through stages of a project
from the options trade-off, testwork program on the tailings
material, phasing in feasibility detailed engineering,construction, commissioning and start-up with a continued
support of the consultant. In such an approach it saw the need
to balance the total tailings between surface as dewatered
tailings and the backfill.
Advances in thickening technology, the trend to higher recoveryof the water the tailings facilities made possible the
implementation of tailings disposal to underground as paste
backfill and as dewater tailings to surface
7/17/2019 Presentation - Enmanuel Pornillo
http://slidepdf.com/reader/full/presentation-enmanuel-pornillo 26/28
Ensayos metalúrgicosResultados desulfurización de relaves por flotación
7/17/2019 Presentation - Enmanuel Pornillo
http://slidepdf.com/reader/full/presentation-enmanuel-pornillo 27/28
Ensayos desulfurización y geoquímicos de relaves
Hallazgos:
La desulfuración de relaves reduce el riesgo del potencial de DAR (Drenaje ácido deroca). Todas las muestras de relaves desulfurados ensayados son clasificados como NOFORMADORES DE ACIDO basado en los valores de NPR (Tasa potencial neta).
Para una flotación de desulfuración mayor a 5 min, el azufre remanente en los relaveses menor a 1%. De acuerdo con los resultados metalúrgicos y geoquímicos delaboratorio se considera tener un tiempo de flotación de 10 min.
7/17/2019 Presentation - Enmanuel Pornillo
http://slidepdf.com/reader/full/presentation-enmanuel-pornillo 28/28
0.01
0.1
1
10
100
-50 0 50 100 150 200 250
M3 reserva con Po
M3-Fe01-RLV (1min)
M3-Fe02-RLV (5min)
M3-Fe03-RLV (10min)
M4 reserva sin Po
M4-Fe01-RLV (1min)
M4-Fe02-RLV (5min)
M4-Fe03-RLV (10min)
M4-Fe03-RLV (15min)
NNP = 0
NNP = 20
NPR = 1
NPR = 2
NNP = -20
NNP (t CaCO3 / kt)
N P R
Incierto
Incierto
non-PAF
PAF
Resultados ABA – Relaves antes y después de la desulfurización
Ensayos geoquímicos estáticos a relaves