precision bearing housing & seal manufacturing...
TRANSCRIPT
PRECISION BEARING HOUSING & SEAL MANUFACTURING PLANTFeaturing: (8) MORI SEIKI CNC Lathes & Vertical Machining Centers, (2) MATTISON 60" Rotary Grinders, GRAY 42" CNC VTL,
Manual VTL’s up to 55" sw., UNION 5" Table Type Horizontal Boring Mill, Engine Lathes up to 30" X 120", SWECO 20 cu. ft. Vibratory Mill, (7) LPG Forklifts up to CAT 12,000-lb., (6) Electric Forklifts, (12) Jib Cranes, MUCH MORE!
At the Premises of
MIETHER BEARING PRODUCTS, INC.8720 N County Road W, ODESSA, TEXAS 79764
(See Directions on Back Page)
AUCTION: TUESDAY, MAY 10 • 10:00 A.M.INSPECTION: Monday, May 9,
9:00 A.M. to 4:00 P.M. & Morning of Sale
BUYER’S PREMIUM: 15% ON-SITE
18% WEBCAST
<MORI SEIKI SL-403B/800 CNC LATHE
>MORI SEIKI
SL-250B CNC LATHE
CNCCNC
<MORI SEIKI MV-65B/50 VERTICAL MACHINING CENTER
>MATTISON
60" VERTICAL
ROTARY SURFACE GRINDER
AUCTION
Read Partial Terms and Conditions on Back Page of Brochure
Headquarters:1304 Langham Creek Drive, Suite 454
Houston, Texas 77084
FAX: (713) 672-7905PHONE: (713) 691-4401
E-MAIL: [email protected]: www.pmi-auction.com
Ron Moore, Texas Lic. #7314
HOUSTON • DALLAS • ST. LOUIS
Sale Conducted By:
CNC
2AVAILABLE
On-Site Bidding in Odessa, Texas or Bid Via Webcast at
CNC LATHESMORI SEIKI MDL. SL-403B/800, new 11/2000, MSG-501 CNC control, 27.9" swing, 24" turning dia., 37" max. machining length, 5.1" spndl. bore, 2,400 RPM, 40 HP, 12-station turret, 15" hyd. chuck, chip conveyor, mist collector, S/N 348.
MORI SEIKI MDL. SL-250B, MSC-500 CNC control, 26.8" swing, 15.35" turn-ing dia., 22.04" btwn. centers, 3.3" spndl. bore, 3,500 RPM, 20 HP, 10-station turret, 12" chuck, S/N 556.
MORI SEIKI MDL. SL-5, Fanuc 6-TB CNC control, 24.4" swing, 12.2" turning dia., 3.03" spndl. bore, 2,500 RPM, 25 HP, 12-station turret, 15" dia. 3-jaw chuck, chip conveyor, mist collector.
(2) MORI SEIKI MDL. SL-4, Fanuc 6TB CNC control, 22" swing, 14" turning dia., 24" btwn. centers, 3.15" spndl. hole, 22–2,200 RPM, 25 HP, 8-station turret, 12" chuck, chip conveyor, mist collec-tor, S/N N.A. (1 machine for parts only).
VERTICAL MACHINING CENTERSMORI SEIKI MDL. MV-65B/50, MSC-501 CNC control, 25.6" x 76.9" tbl., 4,400-lb. tbl. load, 60" X-, 25.6" Y-, 25.6" Z-axis travels, CAT-50, 60–6,000 RPM, 35 HP, 30-pos. ATC, S/N 1415.
MORI SEIKI MDL. MV-65B, Fanuc 11M CNC control, 25.6" x 76.9" tbl., 4,400-lb. tbl. load, 60" X-, 25.6" Y-, 25.6" Z-axis travels, CAT-50, 4,000 RPM, 20 HP, 30-pos. ATC, S/N 9.
MORI SEIKI MDL. MV-55/50, Fanuc OM CNC control, 21 .7" x 55" tbl., 3,300-lb. tbl. load, 40" X-, 22" Y-, 22" Z-axis travels, CAT-50, 3,500 RPM, 15 HP, 24-pos. ATC, S/N 1399.
LEBLOND MAKINO MDL. FNC-106/A30, Fanuc 6M CNC control, 23.6" x 55" tbl., 3,300-lb. tbl. load, 41.3" X-, 23.6" Y-, 22" Z-axis travels, CAT-50, 3,500 RPM, 20 HP, 30-pos. ATC, S/N LM636.
MORI SEIKI SL-250B CNC LATHEMORI SEIKI SL-403B/800 CNC LATHE
CNC CNC
MORI SEIKI MV-65B/50 VERTICAL MACHINING CENTER
CNCMORI SEIKI MV-55/50 VERTICAL MACHINING CENTER
CNC
MORI SEIKI MV-65 VERTICAL MACHINING CENTER
CNCMORI SEIKI SL-5 CNC LATHE
CNC
AUCTION
CNC VERTICAL TURRET LATHEGRAY 42" MDL. VFR, Fanuc 18T CNC control, 52" max. swing, 24" max. work ht., 5-pos. turret, 400 RPM, 75 HP, built-in 4-jaw tbl., coolant shields, S/N 10207.
VERTICAL TURRET LATHESSCHIESS MDL. 13ED-125, 49.2" tbl., 55.1" swing, 43.3" turning ht., 9,020-lb. tbl. cap., spds.: 7.8–123 RPM, 40 HP, dual D.R.O., 5-pos. turret, side head, plain tbl., S/N 377062.
BULLARD 42" SPIRAL DRIVE, 45" swing, 4-jaw, tbl., side head, D.R.O., S/N N.A.
TABLE TYPE HORIZONTAL BORING MILLUNION-WMW MDL. BFT-125T, 55" x 63" built-in rotary tbl., 63" cross, 63" vert., 80" long travels, 5" spndl., No. 7 MT, 710 RPM, outboard support, facing head, D.R.O., assorted tooling, S/N 7822.
LATHESHWACHEON 24" X 120" MDL. HL-630, 24.75" swing, 16" swing over crosslide, 3.15" spndl. bore, 12-spds. 27–1,205 RPM, 15 HP, taper attach., rapid traverse, digital readout, steady rest, inch/metric, 20" dia. 4-jaw chuck, Aloris tool-post, S/N 260702.
SUMMIT 30" X 120" GAP BED, 41.75" swing in gap, 19.75" swing over crosslide, 4.15" spndl. bore, 12-spds., 10–1,000 RPM, 20 HP, inch/metric, taper attach., 24" dia. 4-jaw chuck.
VIBRATORY MILLSWECO MDL. FM-20, 20 cu. ft. cap., S/N 20FM-166-36.
<LEBLOND MAKINO VERTICAL MACHINING CENTER
<42" GRAY CNC VERTICAL TURRET LATHE
<SCHEISS VERTICAL TURRET LATHE
>5" UNION
TABLE TYPE HORIZONTAL
BORING MILL
>24" X 120"
HWACHEON ENGINE LATHE
>30" X 120"
SUMMIT GAP BED ENGINE LATHE
CNC
CNC
ABELL-HOWE 1 T. FREE STANDING PEDESTAL JIB CRANE
PALLET RACKING
MISCELLANEOUS SHOP & WAREHOUSE EQUIPMENT
FANS; FOSDICK BOX COLUMN DRILL; WMW BOX COLUMN DRILL; TOOLBOXES; CAT-50 TOOLHOLDERS; MISC. TOOLING; VISES.
MATERIAL HANDLING EQUIPMENTPALLET RACKING (disassembled); ROLLER CARTS; (7) DUMP HOPPERS; (4) PALLET JACKS.
FREE STANDING PEDESTAL
JIB CRANESGAFFEY 1 T. CAP.
(5) LANDEL 1 T. CAP.
ABELL-HOWE 1 T. CAP.
GAFFEY 1/2 T. CAP.
(2) GAFFEY 1/4 T. CAP.
SHOP BUILT 1/2 T. CAP. POST TYPE.
SHOP BUILT 1/4 T. CAP.
<ROLLER CARTS
<SWECO FM-20 VIBRATORY FINISHING MACHINE
>DUMP HOPPERS
AUCTION
VERTICAL ROTARY GRINDERS(2) MATTISON 60", 60" mag. tbl. size, 72" max. swing, 30" ht. under wheel (est.), 32" segmented wheel, 125 HP wheel drive, power tilt head, mag. filter coolant system, S/N 60-615, S/N 60-611.
7AVAILABLE
2AVAILABLEAt the Premises of
MIETHER BEARING PRODUCTS, INC.
8720 N County Road W, ODESSA, TEXAS 79764(See Directions on Back Page)
AUCTION: TUESDAY, MAY 10 10:00 A.M.
INSPECTION: Monday, May 9, 9:00 A.M. to
4:00 P.M. & Morning of Sale
On-Site Bidding in Odessa, Texasor Bid Via Webcast at
PARTIAL VIEW OF ELECTRIC FORKLIFTS AND PARTSNISSAN 2,500-LB. CAP. ELECTRIC FORKLIFT HYSTER 4,000-LB. CAP. ELECTRIC FORKLIFT
CATERPILLAR 12,000-LB. CAP. MDL. GC55K YALE 3,000-LB. CAP. MDL. GLP030
ELECTRIC FORKLIFTSHYSTER 6,000-LB.
HYSTER 4,000-LB. CAP. MDL. E40ZS, 189" lift ht., side shift, 36 v., S/N E114N02318D.
CATERPILLAR 3,500-LB. CAP. MDL EP18T, new 1995, 83" triple-stage mast, 189" lift ht., 36 v. battery, cushion tires, side shift, 42" forks, S/N 6MM00980.
NISSAN 2,500-LB. CAP. MDL. CWP01L18E, 188" lift ht., side shift, S/N CWP01-9BOO47.
MITSUBISHI MDL. FB025K, S/N A3BC220243.
ORDER PICKERHYSTER 3,000-LB. CAP. ELECTRIC MDL. R30F.
FORKLIFTSCATERPILLAR 12,000-LB. CAP. MDL. GC55K, new 2009, LPG, 78" triple-stage mast, 144" lift ht., cushion tires, 4-way valving, 48" forks, S/N AT88A30300.
(5) YALE 3,000-LB. CAP. MDL. GLP030, (3) new 2004, (1) 2002 and (1) 2000, LPG, 62" standard mast, 90" lift ht., pneumatic tires, 42" forks, S/N A810N03480B, S/N 3504B, S/N 3482B, S/N 2203Z, S/N 5688X.
NISSAN 3,000-LB. CAP. MDL. CPH01A15PV, LPG, 83" triple-stage mast, 189" lift ht., cushion tires, side shift, 42" forks, S/N 900480.
AUCTION
UPCOMING LIVE WEBCAST AUCTIONTHURSDAY, MAY 19 • 9:00 A.M.Surplus to the Ongoing Needs of
AVONDALE ENGINEERING & CONSTRUCTION COMPANY550 Modern Farms Road, Waggaman, Louisiana 70094
COMPLETE HEAVY DUTY MACHINING & FABRICATION FACILITY
At the Premises of
MIETHER BEARING PRODUCTS, INC.8720 N County Road W
ODESSA, TEXAS 79764(See Directions on Back Page)
AUCTION: TUESDAY, MAY 10 • 10:00 A.M.INSPECTION: Monday, May 9
9:00 A.M. to 4:00 P.M. & Morning of Sale
AS NEW AS2004
PLANT & MACHINERY INC. APPRAISAL DIVISION
Confidential Industrial Machinery & Equipment Appraisals Call 1-800-282-8466
On-Site Bidding in Odessa, Texasor Bid Via Webcast at
2009
QS-0031697
P.O. Box 19100Houston, TX 77224-9100
DATED MATERIAL – PLEASE DELIVER
PRECISION BEARING HOUSING & SEAL MANUFACTURING
PLANTFeaturing: (8) MORI SEIKI CNC Lathes & Vertical
Machining Centers, (2) MATTISON 60" Rotary Grinders, GRAY 42" CNC VTL, Manual VTL’s
up to 55" sw., UNION 5" Table Type Horizontal Boring Mill, Engine Lathes up to 30" X 120",
SWECO 20 cu. ft. Vibratory Mill, (7) LPG Forklifts up to CAT 12,000-lb., (6) Electric Forklifts,
(12) Jib Cranes, MUCH MORE!
ODESSA, TEXASAUCTION
PUBLIC INVITEDAUCTION: TUES., MAY 10 • 10:00 A.M.
PresortedFirst Class Mail
U.S. PostagePAID
Eugene, OregonPermit No. 17
ATTENTION: PLANT MANAGEROR EQUIPMENT BUYER
ASSOCIATION OFMACHINERY AND
EQUIPMENT APPRAISERS
A 15% Buyer’s Premium Will Apply On-site. An 18% Buyer’s Premium Will Apply to Webcast Bids. See Above Rules for Participation.
Everything will be sold to the highest bidder or bidders for cash in accordance with the auctioneer’s Customary Terms of Sale, copies of which will be posted on the premises.
ALL PAYMENTS MUST BE MADE BY CASH, CASHIER’S CHECK, WIRE TRANSFER OR COMPANY CHECK WITH BANK LETTER GUARANTEEING PAYMENT TO PLANT & MACHINERY INC.
Here is an example of what your letter should be: Mr. “Customer Name” is a customer of this bank. This bank will guarantee unqualified payment to PMI on the account listed herein up to the amount of $___________. This letter is good until June 10, 2016.
In default of payment of bills in full within the time therein specified, the Auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. All items must be removed by the time announced at the start of the sale.
Lots not paid for and/or removed within the time allowed may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charge of resale, will be charged to the defaulting purchaser.
The buyer acknowledges that he or an agent has inspected all of the assets upon which he will be bidding and/or does purchase.
Buyer agrees to accept assets purchased “AS IS,” WITH “ALL FAULTS” AND “WITH REMOVAL AT BUYER’S RISK AND EXPENSE.” THE AUCTIONEER EXPRESSLY DISCLAIMS ON THE PART
OF THE AUCTIONEER AS AGENT AND THE SELLER, ANY WARRANTY AS TO FITNESS OR USABILITY OF ALL THE ASSETS, AND THE BUYER EXPRESSLY WAIVES ANY CLAIM IN RESPECT TO ANY POSSIBLE FUTURE USE OF ANY ASSET PURCHASED FOR ANY PURPOSE WHATSOEVER.
The buyer does hereby assume and does agree to indemnify and hold the auctioneer harmless from any future claim which shall pertain to the fitness or use of that asset as being purchased. Riggers, movers, electricians and buyers performing work at the Auction Site must provide PMI with evidence of insurance. The insurance coverage must be at a level acceptable to PMI and to the seller. PMI reserves the right to withdraw items, alter the order of the sale, accept bids from the seller, and group lots as it may deem appropriate. This auction may include consignment items.
Although all information has been obtained from sources deemed reliable, the auctioneer and seller make no warranty or guarantee, expressed or implied, as to the accuracy of the infor-mation herein contained, or contained in our catalog. It is for this reason that buyers should avail themselves of the opportunity to make inspection prior to the auction. Although it is not likely, auction sales are subject to cancellation or postponement. Kindly contact auctioneer prior to attendance.
These terms and conditions may be modified or supplemented by language in the catalog avail-able at the sale site or by announcement at the start of the sale. Bidders should be attentive to those announcements and to the catalog language.
PARTIAL TERMS & CONDITIONS
UNABLE TO ATTEND?Bid on-line in real time atTO PARTICIPATE YOU MUST:1. Register at www.BidSpotter.com. Use the link to
BidSpotter on PMI’s website calendar. DO IT NOW.2. Either send wire transfer, or, overnight delivery service a
cashier’s check deposit in the amount of $3,000 (U.S. Bidders) or $10,000 (Foreign Bidders) to: Plant & Machinery Inc. 1304 Langham Creek Drive, Suite 454, Houston, TX 77084 Wire transfer instructions can be found at pmi-auction.com
You must be registered and have your deposit in the hands of Plant & Machinery, Inc. at least 24 hours prior to the start of the auction. Failure to register and/or failure to send your deposit to Plant & Machinery, Inc. may disqualify you from bidding. DON’T WAIT.If you need assistance, don’t hesitate to call (713) 691-4401.ALL WEBCAST BIDS ARE SUBJECT TO AN 18% BUYER’S PREMIUM.
DIRECTIONSFROM MIDLAND INTERNATIONAL AIRPORT: Exit airport using Sloan Field Blvd. Turn left onto S FM 1788/TX 349/FM 1788 and proceed approx. 1.25 miles. Merge onto I-20 W and proceed approx. 6 miles. Take Exit 121 towards TX-338 towards Odessa and merge onto E I-20. Turn right onto SE Loop 338 and proceed approx. 10 miles. Turn left onto US 385 S. Take the first right onto N. County Road W/FM 1882. Proceed to auction site, 8720 N. County Road West, Odessa, TX 79764. Watch for auction signs.
LODGINGComfort Inn & Suites .......................................................... (432) 332-0614801 S. John Ben Shepperd Pkwy., Odessa, Texas
Fairfield Inn & Suites ......................................................... (432) 363-19003933 John Ben Shepperd Pkwy., Odessa, Texas
Holiday Inn & Suites ........................................................... (432) 366-59005275 E. 42nd St., Odessa, Texas
FINANCE YOUR AUCTION
PURCHASEConserve Your Cash &
Increase Your Bidding Power
AuctionLea$e Provides M&E Financing
With Approvals from $5,000 to $999,000
(800) 438-1470
Apply Online:www.AuctionLease.com