pre-stressing post tensioning jacks
TRANSCRIPT
OBSBar Stressing Jacks Capacity 80 - 400 tonne | Stroke 100 mm
Double ActingHollow Cylinder
Puller
Stressing Bridge
E
D
B
C
FA
2 OFF38" NPT38
(tonne) (mm) 2(cm )
Oil cap.
(cc) (mm) (mm)(mm) (mm)(mm)(mm)
OBS Series - Bar Stressing
(kN) (mm)
Wt. (Approx.)
(kg)
Capacity Stroke Effectivearea
CylinderOD
Stool dia.Model Closedheight
Pullerheight
Ram dia.C’hole dia.Capacity Max. bardia.
B F A EDC
Features / Application
Steel Construction Aluminium Construction
www.specialisedforce.com.au
• Higher capacity & customised solu�ons on request. • Specifica�ons are subject to change due to con�nual improvement. • Capacity & Stroke specified are maximum safe limits. As safe prac�ce, use at 80% of ra�ng.
• Used with high tensile threaded bars for stressing,pulling & locking• Short strokes for lifting / aligning of segments &temporary stressing• Long strokes for pulling & locking multiple strandsof concrete structure with tension bar attached tothe pulling bracket• Customised Alloy Aluminium Bar Jacks - 60, 150,160, 200 & 300 tonne• Designed to suit stressing bars of reputed makesof Macalloy, VSL, Freyssinet, Dextra, Tensacciai,Dywidag, Williams & others• Safety Pressure Relief valve in return line• Split Threaded nut for quick install/removal
Equi
pmen
t For
Con
stru
ctio
n
www.specialisedforce.com.au
• Higher capacity & customised solu�ons on request. • Specifica�ons are subject to change due to con�nual improvement. • Capacity & Stroke specified are maximum safe limits. As safe prac�ce, use at 80% of ra�ng.
OMSMulti Strand Stressing / Post Tensioning Jacks with Wedge Lock - Short ProfileCapacity 100 - 1500 tonne | Stroke 200 mm | Working Pressure 600 bar
OMS Series - Multi strand Short profile
0.6” Size0.5” Size(tonne) (mm) 2(cm ) (cc) (mm)(mm) (mm) (mm) (kg.)(kN)
Oil Cap.Maximum No. of Strands C’hole dia. Ram dia.Effectivearea
CylinderOD
Closedheight
Wt.(Approx.)
BA DCRated Stroke Model Capacity
capacity @ 600 bar
Features / Application
C
AWedge Lock
D B
3 8" NPT2-OFF
Customised
• Pre-stressing & post tensioning of strands in concrete structure• Safety Pressure Relief valve in return line• Suitable calibrated power pack units & accessories available
Equi
pmen
t For
Con
stru
ctio
n
OMI Series - Multi strand Integral wedge lock
0.6” Size0.5” Size(tonne) (mm) 2(cm ) (cc) (mm)(mm) (mm) (mm) (kg.)(kN)
Oil Cap.Maximum No. of Strands C’hole dia. Ram dia.Effectivearea
CylinderOD
Closedheight
Wt.(Approx.)
BA DCRated Stroke Model Capacity
capacity @ 600 bar
OMIMulti Strand Stressing / Post Tensioning Jacks with Integral Wedge LockCapacity 100 - 1500 tonne | Stroke 300 mm | Working Pressure 600 bar
Features / Application• Pre-stressing & post-tensioning of strands in concrete structure• Safety Pressure Relief Valve in return line• Suitable calibrated power pack units & accessories available
A
DC B
Customised
• Higher capacity & customised solu�ons on request. • Specifica�ons are subject to change due to con�nual improvement. • Capacity & Stroke specified are maximum safe limits. As safe prac�ce, use at 80% of ra�ng.
Equi
pmen
t For
Con
stru
ctio
n
www.specialisedforce.com.au
OMLMulti Strand Stressing / Post Tensioning Jacks - Long Profile Capacity 200 - 425 tonne | Stroke 150 - 300 mm | Working Pressure 650 bar
Features / Application
E
D CB
3 8" NPT2-OFF
A
OML Series - Multi strand Long profile
Rated Stroke Oil Cap.Model Maximum No. of StrandsCapacity
(tonne) (mm) 2(cm ) (cc) (mm)(mm)0.5” Size 0.6” Size (mm) (mm) (mm) (kg.)(kN)
BA D ECC’hole dia. Nose dia. Depth Wt.
(Approx.)Cylinder
ODClosedheight
Effectiveareacapacity @ 650 bar
• Higher capacity & customised solu�ons on request. • Specifica�ons are subject to change due to con�nual improvement. • Capacity & Stroke specified are maximum safe limits. As safe prac�ce, use at 80% of ra�ng.
Equi
pmen
t For
Con
stru
ctio
n
• Mechanical stroke limiter (by-pass type)• Safety Pressure Relief valve in return line• Pre-stressing & post tensioning of strands in concrete• Suitable calibrated power pack units & accessories available
www.specialisedforce.com.au
Model No.
Flow Rate (Lpm)
Pressure Rating (bar) Motor
kW Voltage (50 Hz) Amps
Remote Pendant Function
4 mtr
Valve Type(3/8"-NPTF Ports)
Sol.= Solenoid Man.= Manual
Usable Oil Cap.
(L)
Approx. Dry
Weight (kg)
Approx. Dimensions(mm)1st
Stage2nd
Stage1st
Stage2nd
Stage08 SERIES
PEM8414 NV 10.5 0.9 50 700 0.84 230 10.0 MOTOR ON/OFF 4w/3p Man. 7 25 320 W x 400 L x 565 H
Durapac PEM8414 Auto Two Speed Electric Hydraulic Power Unit
The Durapac auto two-speed power unit range o�ers high-performance �ow combinations for applications requiring speed and power.
- Single-phase 08 Series has a universal motor and is ideal for �eld use with generators.- Single-phase 1.5 kW versions operate on a standard 10 amp power source and provide high �ows in a portable package.- Externally adjustable pressure relief valve and o�er a range of directional control valve options to operate single and double acting cylinders and tools.- An optional sub-plate style pilot check valve is also available.
Riken SMP- 40 230V Electric Hydraulic Pumps
Durapac HPS Series High Pressure Hydraulic Hoses
Durapac BP150 Battery Hydraulic Pump With In-Built Digital Gauge
Model No. Oil Flow (L/min)
Operating Temperature (c)
BP 150 270 x 185 x 250 9.0 -20 to +40 4000 1.2
Dimensions(mm)
Weight (kg) Motor (watts) Usable Oil (L)
2.0
PEM8424 NV 10.5 0.9 50 700 0.84 240 10.0 MOTOR ON/OFF 4w/3p Man. 20 41 368 W x 490 L x 715 H
* Larger output pumps also available
Large Range of Pressure Gauges
- Bluetooth Remote - Max Pressure 700 BAR- Pendant Remote