214 Colgate Avenue, Elyria, OH 44035 * 440-281-9986 Phone * 440-281-9989 Fax

Used Trumpf L3050 5000 Watt Laser Cutting System, 2004 Model Year

- 5’ x 10’ Dual Pallet - Maximum Workpiece Weight: 1980 - Maximum Sheet Thickness: Mild Steel: 1”

Stainless Steel: 5/8” Aluminum: 1/2”

- Max. Position Speed Simultaneous X and Y Axis: 11,811 IPM - Position Accuracy: + / - .004 - Repeatability: .001 - Trumpf / Seimens Control 840D - Space Requirements: 477” L x 211” W x 121”H - Weight: 26,400 lbs - Resonator: Trumpf TLF CO2 Laser 5000 Watt - Approximately 4,600 laser-on hours

- NOTE: This machine is in excellent condition and has been completely refurbished at TRUMPF’s facility

in August, 2011 with a new resonator, new conveyor, chiller, new dust collector and two (2) new cutting heads

- Machine is Under Power and Available for Inspection - No Warranty – As Is Where Is

Includes: - Rigging-Out (rigging-in is buyer’s responsibility) - Decommission & Recommission by Certified Technician - Two (2) days on-site operator training

Delivery: 4-6 Weeks

F.O.B.: North Canton, OH Terms: 25% Down, Balance Due Prior to Decommission CALL FOR PRICING!

Presented by: Gary Budzik

President

Fabricating Machine Technology 440-666-9187 Cell gbudzik@fabmachtech.com

214 Colgate Avenue, Elyria, OH 44035 * 440-281-9986 Phone * 440-281-9989 Fax

Used Trumpf L3050 5000 Watt Laser Cutting System, 2004 Model Year

 

 

   

Presented by: Gary Budzik President Fabricating Machine Technology 440-666-9187 Cell gbudzik@fabmachtech.com

214 Colgate Avenue, Elyria, OH 44035 * 440-281-9986 Phone * 440-281-9989 Fax

Used Trumpf L3050 5000 Watt Laser Cutting System, 2004 Model Year

TERMS AND CONDITIONS OF SALE WARRANTY: The goods described are pre-owned used goods and are offered “As Is” unless otherwise noted. Fabricating Machine Technology makes no warranties of any kind whatever, expressed or implied, of merchantability and fitness for a particular purpose. All specifications and descriptions of said goods are approximate only. It is the Buyer’s responsibility to inspect goods and ascertain all aspects of the goods conform to the Buyer’s requirements. MACHINE USE & SAFETY: Buyer acknowledges that the goods are pre-owned goods which were neither designed nor manufactured by Fabricating Machine Technology, nor does Fabricating Machine Technology have any knowledge or control over the prior use or misuse of said goods. Fabricating Machine Technology has no control or knowledge of the future use of the goods by the Buyer. By purchasing the machinery on this proposal, the Buyer, his employees, assigns or agents agree not to exceed the manufacturers design specifications, whether known or unknown. It is the Buyers responsibility to provide the proper safety equipment, devices and instructions for any particular use and to take the necessary steps to conform to all Federal, State, Local and OSHA safety standards. TERMS: Buyer is required to submit 25% payment of the total purchase price, which is due upon agreement to purchase machinery described in this proposal. The 75% balance in its entirety must be received by Fabricating Machine Technology before start of decommission of said machinery and goods. INDEMNIFICATION: Buyer agrees to indemnify and hold harmless Fabricating Machine Technology, its officers, directors, employees, sales persons, agents and sub-consultants from and against all damage(s), liability and cost(s), including but not limited to attorney’s fees and defense costs arising out of or in any way connected with the goods purchased. Further, any claims or disputes between the Buyer and Fabricating Machine Technology arising out of the goods purchased and/or services provided by Fabricating Machine Technology shall be submitted to non-binding mediation. It is agreed and understood that all legal action/remedies associated with the purchase of the goods described in this proposal herein shall be filed and conducted in the County of Lorain in the State of Ohio.