JAIPUR INSTITUE OF ENGINEERING AND TECHNOLOGY,KUKAS

Presented By NAME PRABHASH KUMARYEAR-4THR.NO-11EJAME072 JAIPUR INSTITUE OF ENGINEERING AND TECHNOLOGY,KUKASDEPARTMENT OF MECHANICAL ENGINEERINGA PRACTICAL TRANING PRESENTATION ON

BHARAT WAGON & ENGINEERING COMPANY LIMITED, MUZAFFARPUR

INTRODUCTIONITS A GOVT. INDIA ENTERPRISES.THIS COMPANY WAS STARTED BY ENGLISH MAN IN 1870. IT WAS ALWAYS MANUFACTURES AND SUPPLIERS SUGAR MACHINERIES, AGRICULTURE IMPLEMENTS AND OTHER MECHANICAL AND STRUCTURAL JOBS.BWEL HAVING THREE UNIT ACROSS INDIA MOKAMA, MUZAFFARPUR AND HOWRAH

LIST OF SHOPS PERSENT IN THIS FACTORYPRESS & SMITHY SHOPCUTTING & WELDING SHOPTEMPLATE SHOPDRILLING SHOPMACHINE SHOP STUCTURAL SHOPMAINTENANCE SHOPWAGON ASSEMBLY SHOPFINISHING SHOP

PRODUCTSWAGONS FOR INDIAN RAILWAYRAILWAYS WAGON FOR DEFENCE SECTORSC.I. WAGON COMPONENTSTEEL TANK FOR FUEL STATION

INDIAN RAILWAYS WAGONSIndian railways are the principle mode of transpot of goods & raw material.

FREIGHT WAGONS

Indian railway earns about 70% of its revenues from freight traffic.Most of its profits come from transporting freight and this makes up for losses on passnger traffic.

PRESS AND SMITHY SHOPIN THE PRESS & SMITHY SHOP THERE ARE 7 SMALL OPEN HEARTH FURNACES.THE FURNANCE ARE CONNECTED WITH BLOWER.IN THIS SHOP MANY COMPONENTS ARE MANUFACTURED AS- HEAD STOCK PRESSING ANCHOR PLATE PRESSING & ANCHOR SUPPORT PLATE PRESSING.MACHINE USED IN THIS SHOP ARE- HYDRAULIC PRESS, PRESS MACHINE & POWER HAMMER

HYDRAULIC PRESSThe hydralic press is used to manufacture U shape anchor plate.for this plate is heated in the oil furnance

CUTTING AND WELDING SHOPTHIS IS ONE OF THE SHOP IN WHICH THE BASIC WORK IS PERFORMEDTHIS SHOP IS MAINLY INVOLVE IN CUTTING THE PLATE OF DIFFERENT THICKNESS IN THE DESIRE SHAP & SIZE AND IN THE PROFILE CUTTINGTHEY ARE WELDED CROSS BAR ,SIDE BODY AND OTHER MISCELLANEOUS PARTS ARE MANUFACTURING IN THE SHOP

CROPPING MACHINEThis machine is also called cropping shearing machine.This machine can cut flats plate of small size, angle plates, square hollow rod & circular hollow rod.

CHIPPING MACHINEThis machine is used to produce an inclined shape at the end of plate which is necessary in the end to end welding.

TEMPLATE SHOP

THIS IS A PATTERN A TIME MASS SCALE.THIS SAVES A LOT OF TIME AS NO MARKING NECESSARY WHEN USINGTEMPLATE.CREEP ANGLE AND TOP ANGLE ARE MANUFACTURING IN THIS SHOP.THE TEMPLATE ARE USUALLY MADE OF MILD STEELIN THIS SHOP NEED GREATEST ACCURACY BECAUSE SHAPE OF ALL COMPONENT MADE WITH THE HELP OF TEMPLATEDEPEND UPON THE SHAPE OF TEMPLATE

DRILLING SHOPIn this shop drilling is done by two method , i.e by MARKING & JIG.For mass production of component jig is used for drilling.

MACHINE SHOPMachine shop is the biggest shop of any organization.In this shop various types of machine are used.

STRUCTURAL SHOPTHIS SHOP IS ALSO CALLED AS SUB ASSEMBLY SHOP.IN THIS SHOP ONLY CENTURE SILL IS MANUFACTURE. CENTURE SILL IS MIDLE PART OF WAGON .IN THE MANUFACTURING OF WAGON THE CENTURE SILL IS USED IN THREE PARTS WHICH ARE WELDED AND MAKE IN SINGLE LONG PLATE.THE COMPLETE BOX IS KEPT ON WHEELS ASSEMBLY AND THEN IT IS SENT FOR FINISHING

WAGON ASSEMBLY SHOPIN THIS SHOP THE VARIOUS COMPONENT WHICH ARE MANUFACTRED IN THE DIFFERENT SHOP ARE ASSEMBLED AND THE WAGON IS COMPLETED AND THEN SENT TO THE FINISHING SHOPTHE COMPONENT IS ASSEMBLED IN THE SHOP ARE- CENTRE SILL SOLE BAR ,HEAD STOCK, CROSS BAR, BOLSTER, PIVOT,CHANNEL BREAK,BREAK PIPE ,BREAKE CYLINDER

FINISHING SHOPUnder frame hock

Body fitting

Body manipulator welding

Door fitting on wagon

Body hook bolting

Wagon wheeling

Air brake

Painting and Marking

Final inspection & D.M

ThanksWelcome For ANY QUERY...?