pp and hdpe corrugated pipe - environmental xprt · pler directly on one end of the pipe, keeping...

Catalogue C5 12 2013

PP and HDPE corrugated pipecomplete sewerage systems in PP and HDPE

TEHNO COR PP - Polypropylene corrugated pipe PP SN 8 / SN 12 / SN 16

2

Advantages of polypropylene corrugate pipes:• greater hydraulic leak guarantee 0.5 bar.• greater resistance to crushing and

deformation.• greater chemical resistance.• greater resistance in time (> 50 years).

Applications:In civil and industrial building, for:• achieving systems for domestic sewerage,

stormwater, industrial, construction• systems for drainage of stormwater,

construction• retention-detention network systems anti-

flood• crossing and drainage for roads, highways,

railways• building bridges and roadways• underground cable protection• building wells• different hydrotechnical improvments.

Polypropylene corrugated pipes with double wall for underground sew-age pipes, without pressure, are producced according to SR EN 13476-3, type B, standardized through reference to the internal diameter.

Innovative characteristic is the jointing system through co-extruded cou-pler directly on one end of the pipe, keeping the structural and perfor-mance characteristics associated. Ensures in this way superior mechani-cal resistance, good sealing performance and easy installation.

Using polypropylene for producing corrugated pipes, material with flexuralmodulushigh,togetherwithgeometryoftheprofiledesignedformaximumcrushresistance,allowstoaccomplish the high circular rigidity, class SN16=16 kN/m2, which reduces the deformation of the installed pipes compared with pipes SN4 and SN8 made from polyethylene with 25 % and 15 % for the same diameters and lay-ing conditions .

Increasing of the circular rigidity represents better guarantees against ovality phenomenon that can occur in extreme laying depths less than 0.8 m or in depth over 6 m under conditions of incorrect laying, ensuring in this way the system performance for long-term (over 50 years).

Coupling length, which varies for each diameter, ensures the hidraulic tightness of the sistem and seal from rub-berEPDM,specificallydesignedforthepipeprofile,ensuresperfectsealingofthesystemat0.5barcompressionand 0.3 bar depression according to EN 1227.

0,0

0 50 100 150 200 250 300 350 400 450

0,1

0,2

0,3

0,4

0,5

0,6

0,7

0,8

0,9

1,0

1,1

1,2

1,3

1,4

1,5

Cement

Slate

PVC

PE-HD

PP

Fiber-glass

Abr

asio

n (m

m)

Number of cycles

-40 -20 20 40 60 80 1000˚0

PP

PE

PVC

Abrasion resistance

Temperature resistance

• greater impact resistance, especially at low temperatures.

• greater resistance to abrasion compared with other materials for sewerage.

• alowerspecificweight(kg/m).• recyclable material.

The following catalogue can be modified without a previous notice.The images and drawings do not create any contractual obligations.

TEHNO COR PP - Polypropylene corrugated pipe PP SN 8 / SN 12 / SN 16

3

ID (mm) 300 400 500 600

OD (mm) 335 450 565 670

Corrugated pipes with coupler and seal (useful lenght 6m)

SN 8 (€/m) 17.97 34.38 45.28 71.95

SN 12 (€/m) 22.62 43.83 55.85 86.56

SN 16 (€/m) 41.11 65.94 109.07 171.14

ComponentsBar SN 8 (€/m) 15.77 33.51 45.32 65.84

Bar SN 12 (€/m) 22.85 44.55 60.17 87.39

Bar SN 16 (€/m) 39.14 61.71 102.06 140.03

Coupler (€/bc) 11.76 21.00 33.60 141.48

Seal (€/bc) 4.93 9.80 18.20 20.24

Transport (ml/truck)

480 240 192 144

Comparation of the flow discharged of the pipes reported to the ouput diameter (DN/OD) and input diameter (ND/ID)Pipewithnormalslopeof3‰,fillfactor(h/D)=3/4=0,75

ID = pipe input diameter(mm); OD = pipe outside diameter(mm);

Q =flowrate(liters/sec); V = transport speed (m/sec)

∆Q=increaseoftheflowthroughpipesDN/IDcomparedwithDN/ID

DN/OD - SR EN 13476-3 DN/ID - SR EN 13476-3∆Q

ID OD Q V ID OD Q V

176 200 15.66 0.8 200 - 21.98 0.87 40.36

217 250 27.27 0.92 250 - 39.66 0.99 45.43

272 315 49.56 1.06 300 335 64.18 1.13 29.50

344 400 92.06 1.23 400 450 136.94 1.35 48.75

430 500 165.62 1.42 500 565 246.16 1.56 48.63

537 630 296.89 1.63 600 670 397.15 1.75 33.77

680 800 551.3 1.89 800 932 843.6 2.09 53.02

853 1000 997.7 2.17 1000 - 1612.35 2.43 61.61

ID

ED

Useful lenght

Total lenght


TEHNO COR PE - Polyethylene corrugated pipe PE SN 4 / SN 8

4

ED (mm) 160* 200* 250* 315 335 400 450 500* 565 630* 670 800* 930* 1000* 1200*

ID (mm) 135 176 218 273 300 344 400 427 500 533 600 690 800 853 1025

Corrugated pipes with incluODd coupler and seal - useful lengt 6 mSN 4 (€/m) - 6.96 10.47 15.20 17.80 24.24 27.98 38.45 53.21 63.12 74.19 104.58 119.46 146.39 216.01

SN 8 (€/m) 6.26 8.30 13.70 19.39 21.70 29.44 34.99 46.92 59.17 71.84 88.99 128.94 166.90 173.08 249.07

ComponentsBar SN 4 (€/m) - 6.28 9.34 13.11 16.88 22.78 25.75 35.31 49.43 56.96 68.62 97.16 104.39 130.81 189.74

Bar SN 8 (€/m) 5.67 7.69 12.47 17.47 21.06 28.26 33.05 44.05 55.28 67.07 84.27 124.44 153.33 158.58 224.26

Coupler (€/pc) 3.42 3.81 6.78 9.55 15.23 20.19 29.34 35.81 48.02 55.24 157.30 219.04 296.94 312.38 483.00

Seal (€/pc) 1.34 1.51 2.13 3.39 4.56 6.86 11.06 12.57 20.58 23.63 29.34 54.12 86.49 87.78 137.55

Transport (ml/truck) 2208 1440 960 576 480 384 240 240 192 180 144 108 72 60 48

Double wall corrugated pipes made from polyethylene (HDPE) for indus-trialandcivilsystemsforfluidswithoutpressureareproducedaccord-ing to SR EN13476 -3, cover a wide range of sizes, from 160 to 1200 with stiffness classes SN4 and SN8.

Theexternallayerisblack,madefromHighdensitypolyethyleneUVprotection and inside layer is white.

Theexternalwallprofileprovidesgreatringstifness,givesanoptimalbalancebetweenflexibility-rigidity,withoutslidingtothegroundinundergroundsewersystemandallowslight radii.

Smoothinsidewallofthepipeensuresgoodtransmissionofthefluidswithalowfrictioncoefficientandverygood resistance to abrasion, has the color white in order to facilitate visual inspections and with telecamera.

Double wall corrugated pipe comes in bars of 6 meters usable length and at one end has the integrated cou-pler.IntegratedcouplertogetherwithEPDMrubbersealthathasaspecialprofileensureperfecttightnessandresistanceintime.Atthesametime,theunitweightofthepipeissignificantlyreducedcomparedtoclassicsystems, offering additional advantages for handling, storage and installation.

* Without BVQI certification


TEHNO DRAIN - PE, PP corrugated pipe for draining

Double wall corrugated drainage pipe with slots on the entire circumference

900900

L

1200L

600L

600L

600L

L

900

L

1200L

600

L

600

L

600

L

900900

L

1200L

600L

600L

600L

L

900

L

1200L

600

L

600

L

600

L

5

Drainage pipe is made from corrugated pipes available in diameter range 160-1200 mm. It comes in bars in 6m withcoupler.Theslotsmaybearrangedat220or360degrees.Sizingslotsismadeaccordingtotheconfigura-tion of the needed diameter and on clients requests.

ED (mm) 160 200 250 315 335 400 450 500 565 630 670 800 930 1000 1200

ID (mm) 135 176 218 273 300 344 400 427 500 533 600 690 800 853 1025

Bar SN4 (€/m) - 7.96 11.97 16.70 21.60 26.41 30.15 43.45 59.88 71.45 84.19 116.25 132.79 166.39 239.34

Bar SN8 (€/m) 7.09 9.47 15.37 21.06 25.97 31.77 37.82 51.92 66.34 80.51 100.66 140.61 186.90 193.08 274.07

Capture area 220 (cm�/ml)

135 172 210 262 290 332 385 413 482 517 550 550 550 550 550

OD (mm) 63 90 110 125 160 200

ID (mm) 50 76 92 105 138 170

Corrugated tube(€/m)

0.95 1.66 2.17 2.47 4.23 6.67

colors: green, slots 2 mm

delivery coils 50 ml (at OD 200-25ml)

OD (mm) 335 450 565 670

ID (mm) 300 400 500 600

Bar SN8 (€/m) 20.47 36.88 47.78 47.45

Bar SN12 (€/m) 25.12 46.33 58.35 89.06


290 385 482 550


290 385 482 550


Performance and technical characteristics

6

Characteristic PPValue PEValue MU Test method

Density at 23°C 910 960 kg/m3 ISO 1183

Flow index 0,3 (230°C, 2.16kg) 0,3 (190°C, 5kg) ISO 1133

Rezistence to traction > 30 > 22 MPa ISO 527

Coefficientelasticitytobending 1700 - 2000 800 - 1200 MPa ISO 178

Charpy impact resistance (23°C – jagged) 50 25 kJm2 ISO 179/1eA

Oxidation induction time at 200°C > 8 > 20 minutes ISO 728

Vicatsofteningtemperature 155 125 °C ISO 306

Oven test (150°C, 30 – 60 min) Without cracks Without cracks - ISO 12091


Angular stiffness SN 8 ; 12 4 ; 8 kN/m2 ISO 9969

Impact resistance at 0°C TIR≤10 TIR≤10 % EN 744

Angularflexibility(strain30%) Without cracks Without cracks EN 1446


Tightness of the system at pressure after 30 min Without loss Without loss EN 1277

Tightness of the system at pressure after 15 min Variation≤10 Variation≤10 EN 1277

Resistance to abrasion after 100.000 cycles (loss through abrasion)

< 0,1 < 0,1 mm EN 295

Physical

Mechanical

Functional

Flow

Testing the stiffening clamp Flexibility of deformation clamp Deformation testing and hydraulic properties of the system

ED 160 200 250 315 335 400 450 500 565 630 670 800 930 1000 1200

ID 135 176 216 271 300 343 400 427 500 535 600 690 800 853 1025

Slope 2 ‰

Q (l/s) 5.75 11.66 20.13 36.85 48.33 69.07 104.08 123.88 188.71 226.02 306.86 425.09 660.86 779.25 1296.48

V(m/s) 0.41 0.49 0.56 0.65 0.7 0.76 0.84 0.88 0.98 1.02 1.11 1.2 1.34 1.4 1.59

Slope 5 ‰

Q (l/s) 9.09 18.43 31.82 58.27 76.41 109.22 164.56 195.87 298.37 357.37 485.18 672.12 1044.91 1232.11 2049.92

V(m/s) 0.65 0.77 0.88 1.03 1.1 1.2 1.33 1.39 1.55 1.62 1.75 1.9 2.12 2.21 2.51

Slope1 %

Q (l/s) 12.85 26.06 45 82.4 108.06 154.46 232.73 277.01 421.96 505.39 686.15 950.53 1477.72 1742.47 2899.02

V(m/s) 0.92 1.09 1.25 1.46 1.56 1.7 1.89 1.97 2.19 2.29 2.47 2.68 3 3.12 3.55

Slope5 %

Q (l/s) 28.74 58.28 100.63 184.26 241.64 345.37 520.39 619.41 943.53 1130.09 1534.29 2125.44 3304.28 3896.27 6482.41

V(m/s) 2.05 2.44 2.8 3.26 3.48 3.81 4.22 4.41 4.9 5.12 5.53 6 6.7 6.98 7.93


Assemblage instructions

7

Utilization conditions:Referencestandard:SREN13476-3,SRENV1046:2002,SREN1610:2000

• permanent high temperature of the liquDIs transported: 40°C;• roadtrafficupto100kN/wheel(heavytraffic);• narrow trenches, correct laying.

ND (mm) Minimum wDIth propped trench

Minimum wDIth unpropped trench

≤225 ND + 0,40 m ND + 0,50 m

>225≤350 ND + 0,50 m ND + 0,70 m

>350≤700 ND + 0,70 m ND + 0,85 m

>700≤1200 ND + 0,85 m ND + 1,00 m

Forța de împingere(pârghie / utilaj)

Capãt de țeavã înmanșonul liber

Pat suport

Garniturã

Umpluturãcompactatã

B

De

H

h2

Forța de împingere(pârghie / utilaj)

Capãt de țeavã înmanșonul liber

Pat suport

Garniturã

Umpluturãcompactatã

B

De

H

h2

Thrust(Leverage / equipment)

Free sleeve pipe end

Support bed

Seal

Compactedfilling

B

De

H

h2

h2 = 100-150 mm according to pipe ND

H = minimum 0.8 m

• execute the pipe sand bed thickness h2= 100- 150 mm de-pending on pipe diameter without compact it

• prepare the joining zone, so that the pipe will support on her entire length and not on the coupler.

• themaximumparticlesizeofthefiller:22mmforND≤200mmand40mmforND>200mm.

• after coupling compact the joining zone, ensuring a continous support bed.

• fillthespacearoundthepipeinlayersnotexceeding300mmandcompacteachlayer.

• continuefillinguptomorethan150mm(300mmfortheroadsurface)intheupperpartofthepipe.

• theexcavatedmaterialcanbeusedforfillingthetrenchaslongthatcanbecompactedandhastherequi-red graned.

For a correct jointing, follow the instructions mentioned bellow:

• Checkflatness,slopeandcompactiondegreeofthesandbedonwhichthepipeislayed.

• Thetranchwidthshouldallowcompactionofthefilleraroundthepipe.

• Place the pipe in the trench by hand, textile ropes or using the worksite machineries.

• Inspect the coupler and remove any foreign material.

• Use a clean cloth or brush to coat the coupler and seal with lubricant.

• Check correct alignment of pipes.

• Do not press directly on the coupler, use an end of the pipe and a wooden lever.

Check the seal position (must be positioned between the second and third ring for

corrugated pipe with OD ≤ 200 and between the first and second ring for corrugated pipe with OD ≥ 250). Should not be, under any circumstances, twisted or crooked (see drawing).


Fittings made-up of corrugated pipe segments

8

OD (mm)

ID (mm)

Elbows 30 - 45 (€/pc) Yramification(€/pc)

Yramification (reduced) (€/pc)

Equal tee (€/pc) Teduced tee (€/pc)

Reduced at Reduced at

160 135 7.25 14.20 - - 12.47 - -

200 176 9.67 16.52 160 14.07 15.15 160 14.33

250 218 19.75 32.48 160÷200 22.12 26.09 160÷200 22.40

315 273 25.78 42.19 160÷250 30.90 34.55 160÷250 31.51

335 300 32.83 52.16 160÷315 53.34 59.58 160÷315 54.81

400 344 44.38 69.76 160÷335 72.10 80.13 160÷335 74.01

450 400 54.76 84.04 160÷400 99.82 109.23 160÷400 102.79

500 427 80.90 127.96 160÷450 129.10 140.41 160÷450 132.91

565 500 103.47 162.07 160÷500 164.86 180.44 160÷500 169.76

630 533 120.72 192.02 160÷565 222.92 236.14 160÷565 230.05

670 600 208.23 297.48 160÷630 330.39 419.55 160÷630 341.37

800 690 291.08 416.51 160÷630 491.36 663.95 160÷630 508.24

930 800 379.70 537.36 160÷630 607.48 866.28 160÷630 628.54

1000 853 484.13 699.65 160÷630 691.40 1011.16 160÷630 715.40

1200 1025 700.25 993.67 160÷630 950.51 1469.36 160÷630 984.18

OD (mm)

ID (mm)

Sanded coupler (€/pc) Coupler (reduced)(€/pc)

Transition piece F/M (€/pc)

End-cap M/M (€/pc)

Cap (€/pc)

Reduced at

160 135 17.13 - - 22.20 24.32 5.45

200 176 17.66 160 45.46 30.66 32.78 6.13

250 218 29.08 160÷200 54.98 40.18 43.35 11.26

315 273 32.25 160÷250 64.50 61.32 66.61 14.45

335 300 38.27 160÷315 137.87 on request on request 18.94

400 344 43.67 160÷335 157.54 88.81 95.16 26.29


500 427 53.50 160÷450 173.40 117.36 125.93 42.92


630 533 79.83 160÷565 274.90 157.54 167.05 64.67


800 690 231.45 160÷630 475.79 263.27 274.90 221.98




45° 30°

45° 45°

90°

60°

45° 30°

45°

90°

60°

45°30°90°60°

45° 30°

45° 45°

90°

60°

45° 30°

45°

90°

60°

45°30°90°60°

45° 30°

45° 45°

90°

60°

45° 30°

45°

90°

60°

45°30°90°60°

45° 30°

45° 45°

90°

60°

45° 30°

45°

90°

60°

45°30°90°60°

45° 30°

45° 45°

90°

60°

45° 30°

45°

90°

60°

45°30°90°60°

45° 30°

45° 45°

90°

60°

45° 30°

45°

90°

60°

45°30°90°60°

45°

30°

45°

45°

90°

60°

45°

30°

45°

90°

60°

45°

30°

90°

60°

45° 30°

45° 45°

90°

60°

45° 30°

45°

90°

60°

45°30°90°60°

45° 30°

45° 45°

90°

60°

45° 30°

45°

90°

60°

45°30°90°60°

45° 30°

45° 45°

90°

60°

45° 30°

45°

90°

60°

45°30°90°60°


9

OD (mm)

ID (mm)

Tee (€/pc) YRamification(€/pc) YRamificationreduced(€/pc)

Reduced at

160 135 23.55 24.68 - -

200 176 32.02 33.69 160 32.43

250 218 36.22 43.58 - -

OD (mm)

ID (mm)

Tee (€/pc)

630 533 315.38

700 600 357.67

800 690 513.54

930 800 664.58

1000 853 815.63

1200 1025 1249.42

OD (mm)

ID (mm)

Elbow (€/pc)

160 135 11.22

200 176 13.20

250 218 22.55

315 273 42.93

45° 30°

45° 45°

90°

60°

45° 30°

45°

90°

60°

45°30°90°60°

45° 30°

45° 45°

90°

60°

45° 30°

45°

90°

60°

45°30°90°60°

45° 30°

45° 45°

90°

60°

45° 30°

45°

90°

60°

45°30°90°60°

45° 30°

45° 45°

90°

60°

45° 30°

45°

90°

60°

45°30°90°60°

45° 30°

45° 45°

90°

60°

45° 30°

45°

90°

60°

45°30°90°60°

Transition Special piece

Existing pipe

Seal

Diameter (mm)

110 160 200

Transition piece (€/pc)

37.33 46.67 51.33

Seal (€/pc)

11.20 13.07 14.00

Milling cutter with adapter (€/pc)

242.55 316.05 330.75

Fast branch pipe kit

Injectedfittings


Modular visting manhole with OD 1000 / 1200 mm

Conical reducer for corrugated pipe column (€/pc)

OD (mm) 1000 1200

Centric (€/bc) 228.38 292.42

Eccentric (€/bc) - 259.79

OD (mm) 1000 1200

Seal between conical reducer and column (€/bc) 81.05 108.65

OD (mm) 1000 1200

Pipe rise SN4 (€/ml) 130.81 189.74

OD (mm) 1000 1200

Rise seal between the pipe rise and molded base (€/bc) 76.13 80.35

OD (mm) 1000 1200

Molded base with 1 inlet and 1 outlet (€/bc) 374.58 374.58

OD (mm) 1000 1200

Manhole base with 3 inlet and 1 outlet (€/bc) 412.04 412.04

Connections in manhole base (€/pc)

OD (mm) 110 125 160 200 250 315 350 400 465 500 580 630

Welded coupler for corrugated pipe

- - 3.69 4.11 7.31 10.30 16.43 21.78 31.66 38.64 51.81 59.60

Connector made from smooth PE pipe for connecting with smooth PVCorPEpipe

1.34 1.73 2.86 4.42 6.88 10.94 - 17.53 - 27.34 - -

Coupling sealing adapter for connections with smoothPVCorPEpipe

10.15 - 11.84 12.69 18.61 21.15 - 25.38 - 29.60 - -

Stairs at 30 cm intervall (€/ml) 104.88

OD (mm) 1000 1200

Load distribution formwork (€/bc) 105.73 105.73

700

800

900

950

700

(DN

100

0)

300

(DN

100

0)20

0

400

(DN

120

0)

800

(DN

120

0)

620

DN 1000

1000 - 1200

DN 1200

DN/OD 630 max

DN/OD 630 max

1250

700

(DN

100

0)

300(

DN

100

0)20

0

800

(DN

120

0)

620

DN 1000

DN 1200

570

60

670

830

DN/OD 500 max

DN/OD 500 max

DN/OD 5

00 m

ax

DN/OD 500 m

ax

600

600

10 The following catalogue can be modified without a previous notice.The images and drawings do not create any contractual obligations.

Modular visiting manhole with ID 600 mm

Modular visiting manhole with OD 630, 800 mm

ID (mm) 600

Rise seal bettween molded base and column (€/bc) 20.64

ID (mm) 600

Pipe rise SN4 (€/ml) 68.62

OD (mm) 800

Conical reducer for corrugated pipe column (€/bc) 119.63

OD (mm) 630 800

Pipe rise SN4 (€/ml) 56.96 97.16

OD (mm) 800

Seal for conical reducer (€/bc) 46.71

ID (mm) 600

Molded base with 1 inlet and 1 outlet (€/bc) 159.50

OD (mm) 630 800

Rise seal bettween molded base and column (€/bc) 63.44 71.90

OD (mm) 630 800

Molded base with 3 inlets and 1 outlet (€/bc) 217.50 217.50


OD (mm) 110 125 160 200 250 315 350 400Welded coupler for corrugated pipe

- - 3.69 4.11 7.31 10.30 16.43 21.78

Connector made from smooth PE pipe for connecting with smooth PVCorPEpipe

1.34 1.73 2.86 4.42 6.88 10.94 - 17.53

Coupling sealing adapter for connections with smoothPVCorPEpipe

10.15 - 11.84 12.69 18.61 21.15 - 25.38


OD (mm) 110 125 160 200 250 315 350 400Welded coupler for corrugated pipe

- - 3.69 4.11 7.31 10.30 16.43 21.78

Connector made from smooth PE pipe for connecting with smoothPVCorPEpipe

1.34 1.73 2.86 4.42 6.88 10.94 - 17.53

Coupling sealing adapter for connectionswithsmoothPVCorPE pipe

10.15 - 11.84 12.69 18.61 21.15 - 25.38

702

620

720

440

440

70

540

710

H

ND

L20

0

300 DI max

400 DI max

Rezistance rib

300

DI m

ax

300 DI max

ND 630

ND 800

810

11The following catalogue can be modified without a previous notice.The images and drawings do not create any contractual obligations.

Inspection and branching manholes OD 315, 400 mm, ID 300, 400 mm

Gully pots

Infiltrationmanholesofcorrugatedpipe

OD (mm) 315 400

ID (mm) 300 400

Manhole base in/out (h=0,35 m) (€/pc) 65.41 81.01

Corrugated column SN4 (€/ml) 13.11 22.78

PE cover for green spaces (€/pc) 24.00 25.21

Cast iron cover (€/pc)B125 65.00 89.88

D400 73.00 97.88

OD (mm) 315 400

ID (mm) 300 400

Manhole of corrugated pipe (h=0,8 m) (€/pc) 39.79 46.58

Manhole corrugated column (€/ml) 13.11 22.78

Cast iron grate D400 (€/pc) 72.92 97.79

OD (mm) 1000x600 1200x600

Conical reducer for rise pipe (€/pc) 228.38 259.79

OD (mm) 160 200

Branching kit (€/pc) 59.73 65.33

Columnspecification(mm)OD 1000 1200ID 853 1025Slot lenght 98 120Slot width 10 10Slot number 6 6

OD (mm) 1000 1200

Rise pipe (€/ml) 183.96 265,26

Manhole base (H=1m) (€/pc) 268.75 374.55

Connections in manhole base

OD (mm) 110 160 200 250

Welded coupler (€/pc) - 3.69 4.11 7.31

Seal (€/pc) 3.46 7.38 11.40 17.74

* On the siOD the maximum diameter of the pipe to be connected is 250 mm.

* Upon orODr we can execute any dimensional variations.

* Lengths from 1 to 4 m.

conical reduction

branching kit

corrugated column

base 1 m

12

Sewer manholes for inspection are recommended for green spaces, parking areas, roads with low, medium or densetraffic.


Monoblock visiting manholes

13

A1 – 125 or A1 – 160

�1100 mm A2 – 200 or A2 - 250

�1100 mm Height Price (€)

A1/70 A2/70 H 70 cm 201.92

A1/100 A2/100 H 100 cm 219.52

A1/120 A2/120 H 120 cm 238.52

A1/145 A2/145 H 145 cm 276.46

A1/200 A2/200 H 200 cm 365.90

A1/250 A2/250 H 250 cm 493.29

A1/300 A2/300 H 300 cm 548.86

A1/350 A2/350 H 350 cm 684.38

A1/400 A2/400 H 400 cm 739.94

A1/450 A2/450 H 450 cm 878.17

A5 - 500


A5/90 H 90 cm 337.74

A5/130 H 130 cm 375.39

A5/175 H 175 cm 393.01

A5/195 H 195 cm 455.35

A5/220 H 220 cm 475.68

A5/260 H 260 cm 631.52

A5/285 H 285 cm 664.05

A5/320 H 320 cm 695.22

A5/370 H 370 cm 851.07

A5/420 H 420 cm 914.76

Manhole A X Y*


A X Y/70 H 70 cm 201.92

A X Y/100 H 100 cm 219.52

A X Y/120 H 120 cm 238.52

A X Y/145 H 145 cm 276.46

A X Y/200 H 200 cm 365.90

A X Y/250 H 250 cm 493.29

A X Y/300 H 300 cm 548.86

A X Y/350 H 350 cm 684.38

A X Y/400 H 400 cm 739.94

A X Y/450 H 450 cm 878.17

Components

Lifting element (€/pc) H 36 cm 65.05Lifting element (€/pc) H 66 cm 85.38Cover PE D630 (€/pc) - 55.97Seal D.630 (€/pc) - 29.81

A

B

C

D

A3 - 315

�1100 mm A4 - 400


A3/85 A4/85 H 85 cm 237.16

A3/135 A4/135 H 135 cm 341.51

A3/185 A4/185 H 185 cm 386.23

A3/215 A4/215 H 215 cm 413.34

A3/265 A4/265 H 265 cm 548.86

A3/290 A4/290 H 290 cm 577.32

A3/315 A4/315 H 315 cm 604.42

A3/365 A4/365 H 365 cm 739.94

A3/415 A4/415 H 415 cm 795.50

A3/465 A4/465 H 465 cm 929.67

A3 - 315

�1100 mm A4 - 400


A3/90 A4/90 H 90 cm 237.16

A3/130 A4/130 H 130 cm 341.51

A3/175 A4/175 H 175 cm 386.23

A3/195 A4/195 H 195 cm 413.34

A3/220 A4/220 H 220 cm 548.86

A3/260 A4/260 H 260 cm 577.32

A3/285 A4/285 H 285 cm 604.42

A3/320 A4/320 H 320 cm 739.94

A3/370 A4/370 H 370 cm 795.50

A3/420 A4/420 H 420 cm 929.67

*Diameter of the outlet connection can be: 110 mm, 160 mm, 200 mm, 250 mm, 200/250mm

The diameter of the pipe that can be connected on each 5 inlets can be maximum 250. It can be used on any inlet, and the connection will be done through tightness seal.

ConnectionwiththeoutletwillbedonethroughthecoupleralreadyinstalledonthePVCpipe or, if is used corrugated pipe, through its coupler.

A1-125, A1-160, A2-200, A2-250, A3-315, A4-400

A1-125, A1-160, A2-200, A2-250, A3-315, A4-400, A-500

AXY-110, AXY-160, AXY-200, AXY-250


Manholes according to customer drawings

14

DE/DI

OD/ID

OD/ID

OD/ID

H

H

OD/ID

OD/ID

OD/ID

OD/ID

od1 /id

1

od/di

od/id

od/id

angle

angle

angle

α

α β

β

H1

H1

α

H1 = upon request

α= upon request

--

β

od2/id2

H

OD/ID

OD/ID

DE/DI

OD/ID

OD/ID

OD/ID

H

H

OD/ID

OD/ID

OD/ID

OD/ID

od1 /id

1

od/di

od/id

od/id

angle

angle

angle

α

α β

β

H1

H1

α

H1 = upon request

α= upon request

--

β

od2/id2

H

OD/ID

OD/ID

DE/DI

OD/ID

OD/ID

OD/ID

H

H

OD/ID

OD/ID

OD/ID

OD/ID

od1 /id

1

od/di

od/id

od/id

angle

angle

angle

α

α β

β

H1

H1

α

H1 = upon request

α= upon request

--

β

od2/id2

H

OD/ID

OD/ID

Manhole diameter Description Diametre

inlet - outlet

Channel bottom(€/pc)

Flat bottom(€/pc)

OD 630

Line manhole (1 inlet / 1 outlet)

OD 160 – OD 200 – OD 250 159.58 133.90

OD 315 – ID 300 – OD 400 196.48 150.93

Manhole with 2 inlets & 1 outlet OD 160 - OD 200 - OD 250 181.87 150.69

Manhole with3 inlets & 1 outlet

OD 160 - OD 200 180.16 155.93

OD 250 191.05 163.80

OD 600


OD 200 – OD 250 – OD 315 188.96 155.71

ID 300 – OD 400 – ID 400 206.21 171.33

Manhole with 2 inlets & 1 outlet OD 160 - OD 200 - OD 250 189.85 158.67

Manhole with 3 inlets & 1outlet

OD 160 - OD 200 197.50 178.79

OD 250 204.59 174.16

OD 800


OD 250 – OD 315 – ID 300 243.25 211.05

OD 400 – ID 400 – OD 500 289.68 224.05

Manhole with 2 inlets & 1 outlet

OD 200 - OD 250 - OD 315 269.50 218.91


OD 160 - OD 200 241.11 213.34

OD 250 - OD 315 284.24 234.19

OD 800

Line manhole (1intrare/1ieșire)

OD 250 – OD 315 265.40 230.97

ID 300 – OD 400 292.29 241.52

ID 400 – OD 500 326.80 257.21

ID 500 – OD 630 - 254.44


OD 200 - OD 250 - OD 315 297.16 249.16


OD 160 - OD 200 271.82 246.51

OD 250 - OD 315 319.47 267.36

OD 1000


OD 250 – OD 315 335.28 282.79

ID 300 – OD 400 357.88 293.33

ID 400 – OD 500 394.22 309.03

ID 500 – OD 630 - 320.93

ID 600 – OD 800 - 448.77


OD 250 - OD 315 361.53 294.45

ID 300 - OD 400 399.95 312.03


OD 250 - OD 315 391.39 309.73

ID 300 - OD 400 442.11 330.82

OD 1200


OD 250 – OD 315 425.89 367.57

ID 300 – OD 400 446.49 378.11

ID 400 – OD 500 493.58 393.81

ID 500 – OD 630 - 417.22

ID 600 – OD 800 - 515.24

ID 800 – OD 1000 - 719.96

Manhole with 3 inlet 1 outlet

OD 250 - OD 315 478.39 385.06

ID 300 - OD 400 530.62 406.15

ID 400 - OD 500 603.81 437.55

DE/DI

OD/ID

OD/ID

OD/ID

H

H

OD/ID

OD/ID

OD/ID

OD/ID

od1 /id

1

od/di

od/id

od/id

angle

angle

angle

α

α β

β

H1

H1

α

H1 = upon request

α= upon request

--

β

od2/id2

H

OD/ID

OD/ID

For manholes higher than the standard (H=1000m), add the price of SN 4 kN/m2 pipe with corresponding diam-eters.Onrequestcanbedeliveryspecialfittingsandmanholesaccordingtocustomerspecifications.


Manholes according to customer drawings

15

For manholes higher than the standard(H=1000m), add the price of SN 4 kN/m2 pipe with corresponding diam-eters.Onrequestcanbedeliveryspecialfittingsandmanholesaccordingtocustomerspecifications.

Manhole diameter Description Diametre

inlet - outlet

Channel bottom(€/pc)

Flat bottom(€/pc)

OD 630 Manhole in L (1 inlet / 1 outlet)

OD 160 - OD 200 - OD 250

208.42 133.90

ID 600 Manhole in L (1 inlet / 1 outlet)

OD 160 - OD 200 - OD 250

228.89 149.22


OD 200 - OD 250 - OD 315

283.47 197.80

ID 800 Manhole in L (1 inlet / 1 outlet)

OD 200 - OD 250 - OD 315

319.39 230.97


OD 250 - OD 315 368.45 272.29

ID 300 - OD 400 390.14 282.83


OD 250 - OD 315 458.21 362.32

ID 300 - OD 400 479.90 372.86

ID 400 - OD 500 512.26 388.56

OD 630Manholes with breakage of slope

OD 160 - OD 200 - 129.96

OD 250 - OD 315 - 140.39

ID 600Manholes with breakage of slope

OD 160 - OD 200 - 145.28

OD 250 - OD 315 - 155.71


OD 200 - OD 250 - 191.32

OD 315 - ID 300 - 213.42

ID 800Manholes with breakage of slope

OD 200 - OD 250 - 224.48

OD 315 - ID 300 - 229.16


OD 250 - OD 315 - 272.29

ID 300 - OD 400 - 282.83


OD 250 - OD 315 - 357.07

ID 300 - OD 400 - 367.61

ID 400 - OD 500 - 351.05

DE/DI

OD/ID

OD/ID

OD/ID

H

H

OD/ID

OD/ID

OD/ID

OD/ID

od1 /id

1

od/di

od/id

od/id

angle

angle

angle

α

α β

β

H1

H1

α

H1 = upon request

α= upon request

--

β

od2/id2

H

OD/ID

OD/ID


Manholes composite material covers

KIO manhole cover is made of composite material (not plastic). The production is unique in the world.

Thecompositematerialincludesreinforcingfibers(glassorcarbonfibers)andamixtureofresins(polyester,epoxy, phenol, polyurethane). Thanks to composition and production process, the KIO cover has superior prop-erties than metal covers:

• low weight;• does not rust;• makes no noise, is silent;• sparkless;• good resistance to chemicals;• easy to maintain;• square or circular;• any logo can be applied on request.

A

A C D

D

EB

Components:

• square frame made from composite provided with special elements for optimizing anchoring in installing phaset;

• square composite cover;• locking device - optional;• logo - optional.

16

Description A x A (mm) B(mm)

C x C(mm)

D x D(mm)

E(mm)

Weight(kg)

Price(€)

Covers/pallet

Weight/pallet

KIO 600 B 125 600 x 600 44 502 x 502 543 x 543 26 10,50 119.93 32 360,00

KIO 700 B 125 700 x 700 46 602 x 602 643 x 643 28 15,50 175.50 10 170,00


C x C(mm)

D x D(mm)

E(mm)

Weight(kg)

Price(€)

Covers/pallet

Weight/pallet

KIO 600 C 250 600 x 600 53 502 x 502 543 x 543 38 16,50 146.70 32 550,00

KIO 700 C 250 700 x 700 55 602 x 602 643 x 643 40 25,00 222,75 10 270,00


C x C(mm)

D x D(mm)

E(mm)

Diameter(mm)

Price(€)

Covers/pallet

Weightpallet

KIO with neck 400 B 125

400 x 400 35 305 x 305 335 x 335 22 315 78,77 16 90

KIO with neck 500 B 125

500 x 500 42 402 x 402 443 x 443 24 400 123,75 12 120

Description Price (€)

KIO 400 – KIO 500 C 250 4,5

KIO 600 – KIO 700 C 250 6,75

KIO square class B125

KIO square class C250

KIO with neck

Closing system


Manholes cast iron covers

17

CodeOutside dimension (mm)

Inside dimensnion (mm)

Height (mm)

Weight (kg)

Price (eur)

CFRD70 700 600 80 44 117.31

CFRD80 800 600 80 51 115.78



Height (mm)

Weight (kg)

Price (eur)

CFPC50 500 x 500 400 x 400 40 20 47.88

CFPC60 600 x 600 500 x 500 45 29 81.22

CFPC70 700 x 700 600 x 600 50 41 94.36



Height (mm)

Weight (kg)

Price (eur)

CFPB60 600 x 600 500 x 500 35 24 75.11

CFPB70 700 x 700 600 x 600 40 35 83.79



Height (mm)

Weight (kg)

Price (eur)

GFPC50 500 x 500 400 x 400 55 20 47.88

GFPC60 600 x 600 500 x 500 50 33 92.80



Height (mm)

Weight (kg)

Price (eur)

GFPD50 500 x 500 400 x 400 75 29 69.44

GFPD60 600 x 600 500 x 500 75 43 129.17



Height (mm)

Weight (kg)

Price (eur)

CFOD80 800 600 80 50 113.51

Round cover class D400

Square cover class C250

Round cover class D400 - ramă octogonală

Square cover class B125

Square grate class C250

Square grate class D400


18

NOTES


19

NOTES


TehnoWorld solutions: • HDPE smooth pipe for natural gas networks • HDPE smooth pipe for drinking water networks • Corrugated pipe for sewerage networks, drain-

age, electric cable protection etc. • PipeandfittingsPVC-KG • Visitingandbranchingmanholes • Butt welding machines • Electrofusion welding machines • Voltageandweldinggenerators,weldingacces-

sories.

• Carriageable and not carriageable covers, chaneles with grate.

• Electrofusionfittings • Compressionfittings • Made-upfittings • Valves,hydrants,pumps,fountains,etc. • Devices and equipment for natural gas networks

S.C TehnoWorld SRLBaia, no. 1616, DN2E km 2Suceava County, RO-727020

0230 546 696 tel0230 206 090 fax0743 069 587 mob

[email protected]

pp and hdpe corrugated pipe - environmental xprt · pler directly on one end of the pipe, keeping...

Documents