www.andersonpower.com- 16 - All Data Subject To Change Without Notice

Stackable Modular HousingsAvailable in four sizes to right size your connection need

Color Coded HousingsHelp ensure that connectors are assembled and mated correctly

This versatile connector series invented by Anderson Power Products® meets a wide range of power connection needs. There are four basic housing sizes in the Powerpole® product family that allow specific amperage or wire size needs to be filled in the most compact footprint. Powerpole® can handle up to 350 amperes per pole and accommodate wire ranges of #20 AWG (0.5 mm²) to 3/0 (70 mm²). A wide range of colored housing options can be stacked together to create a proven reliable custom connector. These housings can be used with different contacts to create wire-to-wire, wire-to-board, or wire-to-busbar connections. The Powerpole® combines high quality materials and a cost effective innovative design to allow powerful versatility.

®

Powerpole® Connectors- PP15 to PP180

SEC

TIO

N 2

Pow

erpo

le® F

amily

Hot Plugging AC or DCContacts feature a sacrificial tip that allow high current circuit interrupt

Connection Versatility Contacts for wire, PCB, or busbar all fit into the same housings

Low Resistance ConnectionSilver or tin plated contacts inside housings that strongly force the contacts together

Self Securing DesignStainless steel springs create a robust force between the contacts that holds the con-nector in the mated condition, but allows it to be quickly dis-connected

Genderless HousingsProvide simplified assembly and minimize the number of components

www.andersonpower.com - 17 -All Data Subject To Change Without Notice

| POWERPOLE FAMILY SELECTION GUIDE |

Actual Size - Connector Half

............................... Powerpole® Housings ............................... PP15/45 PP75 PP120 PP180

Powerpole® Size PP15 to 45 Page # PP75 Page # PP120 Page # PP180 Page #

Connector Types Standard 20 Standard 30 Standard 36 Standard 39

Finger Proof 20 Locking 31 Busbar 40

PCB 21 Busbar 31

Power Pak

21 PCB 31 Ground

23

Amps (UL) Per Pole 0 to 55 120 240 350

Volts (UL) Per Pole 600 600 600 600

Wire Gauge (AWG) 20 - 10 16 - 6 6 - 1/0 10 - 3/0

Wire Gauge (mm²) 0.05 - 6.0 1.3 - 13.3 13.3 - 53.5 5.3 - 85.0

Number of Power Circuits 1 / Stackable 1 / Stackable 1 / Stackable 1 / Stackable

Ground ●

PCBMount ● ●

BusBar ● ●

PanelMount ● ● ● ●

BlindMate

HotPlug ● ● ● ●

TouchSafe ●

PolarizedHousing ● ● ● ●

Latching

StrainRelief

Powerpole® Pak

Powerpole® Pak

Powerpole® Pak

SECTIO

N 2

Powerpole

® Family

www.andersonpower.com- 18 - All Data Subject To Change Without Notice

Powerpole® connectors can be easily customized to each power connection need. Choose from a wide range of colored housings and stack them together into a multiple position connection. Durable silver or tin plated contacts crimp and poke into housings and are available for a broad range of wire sizes. PCB and busbar contacts can also be simply snapped into place using the same housings. Pre-mate ground / power housings and contacts can be used for safety or sequencing and stack along with standard housings.

How to Create Mating Blocks of Stacked Powerpole® ConnectorsA Single Row Assembly such as the 1x3 shown below will mate to itself. If an assembly has more than one row such as the Two Row Assembly 2x1 shown below, then a different mirror image mating assembly is required.

Single Row Assembly 1x3 Two Row Assembly 2x1

To Create a Mirror Image Mating Assembly:When mating blocks are viewed with their hoods in the respective orientation (down or up), the column position of connectors is unchanged. The rows themselves are mirror images of each other. So in the below example, what is column 1 on side A, is column 3 on side B.

Side A Hood Down Side B Hood Up

Powerful Versatility- Create Your Own Custom Connector from Durable Proven Components

SEC

TIO

N 2

Pow

erpo

le® F

amily

A B C

D E F

G H I

C B A

F E D

I H G

Hood Up

Hood Down

Column 3

Column 2

Column 1

Column 1

Column 2

Column 3

www.andersonpower.com - 19 -All Data Subject To Change Without Notice DS-PPFMLY REV C3.0

SECTIO

N 2

Powerpole

® Family

Use the Same Housings for Wire, PCB, or Busbar ConnectionsThe Powerpole® connection system allows the same housings to hold different contacts for terminating to wire, printed circuit boards, or busbars. See some of the many ways Powerpole® components can be assembled to create a custom connection solution.

Wire-to-Wire

Wire-to-PCB

Wire-to-Busbar