powerpoint ® presentation chapter 4 system components and configurations components electricity...

PowerPoint® PresentationPowerPoint® Presentation

Chapter 4Chapter 4System Components and

ConfigurationsSystem Components and

Configurations

Components • Electricity Sources • System Configurations

Components • Electricity Sources • System Configurations

Chapter 4 — System Components and ConfigurationsChapter 4 — System Components and Configurations

PV modules are connected together to form an array, which is the primary power- generating source and principal component in any PV system.

PV modules are connected together to form an array, which is the primary power- generating source and principal component in any PV system.


Since the supply of energy from a PV array rarely matches the energy demand at a given time, some type of energy storage is usually required.

Since the supply of energy from a PV array rarely matches the energy demand at a given time, some type of energy storage is usually required.


PV systems with battery storage usually require more than one battery. A battery bank is a group of batteries connected together to provide a specific voltage and capacity.

PV systems with battery storage usually require more than one battery. A battery bank is a group of batteries connected together to provide a specific voltage and capacity.


Flywheel energy storage systems convert and store electrical energy as kinetic (motion) energy in the rotation of a heavy rotor.

Flywheel energy storage systems convert and store electrical energy as kinetic (motion) energy in the rotation of a heavy rotor.


Supercapacitors store energy by accumulating a charge on pairs of thin foil plates. The plates are usually wrapped into a cylinder shape.

Supercapacitors store energy by accumulating a charge on pairs of thin foil plates. The plates are usually wrapped into a cylinder shape.


Inverters convert DC power from batteries or arrays into utility-grade AC power.

Inverters convert DC power from batteries or arrays into utility-grade AC power.


Charge controllers protect batteries in PV systems from overcharge or excessive discharge.

Charge controllers protect batteries in PV systems from overcharge or excessive discharge.


Rectifiers and chargers make AC power from sources such as the utility or engine generators available for charging batteries or other DC loads.

Rectifiers and chargers make AC power from sources such as the utility or engine generators available for charging batteries or other DC loads.


Balance-of-system (BOS) components include all the mechanical and electrical parts to connect and secure the major components.

Balance-of-system (BOS) components include all the mechanical and electrical parts to connect and secure the major components.


Engines use reciprocating pistons to create mechanical power, which is then converted to electrical power in the generator.

Engines use reciprocating pistons to create mechanical power, which is then converted to electrical power in the generator.


Engine generators are usually installed as a complete, integrated package.

Engine generators are usually installed as a complete, integrated package.


Gas turbines have separate compressor and turbine sections that work together to send mechanical power to a generator.

Gas turbines have separate compressor and turbine sections that work together to send mechanical power to a generator.


Wind turbines convert the power of the wind into electrical energy.

Wind turbines convert the power of the wind into electrical energy.


Fuel cells use hydrogen and oxygen in a process that transfers electrons from hydrogen to an anode and from a cathode to oxygen. The byproducts are water and heat.

Fuel cells use hydrogen and oxygen in a process that transfers electrons from hydrogen to an anode and from a cathode to oxygen. The byproducts are water and heat.


The simplest type of PV system is the direct-coupled system, consisting of only an array and a DC load.

The simplest type of PV system is the direct-coupled system, consisting of only an array and a DC load.


Self-regulating systems avoid the complexity of adding charge control components by precisely sizing the battery and array.

Self-regulating systems avoid the complexity of adding charge control components by precisely sizing the battery and array.


Systems with charge control regulate the charging current into the battery. Regulation may involve disconnecting or dissipating the current inside the controller or diverting the excess current into an auxiliary load.

Systems with charge control regulate the charging current into the battery. Regulation may involve disconnecting or dissipating the current inside the controller or diverting the excess current into an auxiliary load.


Stand-alone systems for AC loads must include an inverter, which draws DC power from the battery bank and changes it to AC power for distribution.

Stand-alone systems for AC loads must include an inverter, which draws DC power from the battery bank and changes it to AC power for distribution.


A utility-interactive system is controlled by the inverter, which adds AC power converted from DC power to the utility grid power at the main AC power distribution panel.

A utility-interactive system is controlled by the inverter, which adds AC power converted from DC power to the utility grid power at the main AC power distribution panel.


Utility-interactive systems have either net-metering or dual-metering arrangements for exporting electricity to the utility grid.

Utility-interactive systems have either net-metering or dual-metering arrangements for exporting electricity to the utility grid.


Bimodal systems can act like either a utility-interactive or a stand-alone system.

Bimodal systems can act like either a utility-interactive or a stand-alone system.


Hybrid systems include power sources other than the PV array and do not interact with the utility grid.

Hybrid systems include power sources other than the PV array and do not interact with the utility grid.

powerpoint ® presentation chapter 4 system components and configurations components electricity...

Documents

system components

system bos components

configurations systems

major components

configurations pv systems

configurations engines

configurations rectifiers

configurations inverters