powerpoint ® presentation chapter 2 working drawing concepts sketching orthographic projections...

PowerPoint® PresentationPowerPoint® Presentation

Chapter 2Chapter 2Working Drawing ConceptsWorking Drawing Concepts

Sketching • Orthographic Projections • Dimensioning •

Architect’s Scale • Linear Measurement • Symbols and

Conventions

Sketching • Orthographic Projections • Dimensioning •

Architect’s Scale • Linear Measurement • Symbols and

Conventions

Chapter 2 — Working Drawing ConceptsChapter 2 — Working Drawing Concepts

Sketches convey ideas graphically and are drawn using basic tools such as pencils, paper, and erasers.

Sketches convey ideas graphically and are drawn using basic tools such as pencils, paper, and erasers.


Plane figures are geometric shapes with flat surfaces.

Plane figures are geometric shapes with flat surfaces.


Pictorial drawings show height (H), length (L), and depth (D) in one drawing.

Pictorial drawings show height (H), length (L), and depth (D) in one drawing.


Receding lines of perspective drawings converge to one, two, or three vanishing points.

Receding lines of perspective drawings converge to one, two, or three vanishing points.


The isometric axes are drawn 30° above horizontal.

The isometric axes are drawn 30° above horizontal.


The oblique axis of an oblique drawing is drawn 30° or 45° above horizontal.

The oblique axis of an oblique drawing is drawn 30° or 45° above horizontal.


The three-view drawing is the most common type of orthographic projection.

The three-view drawing is the most common type of orthographic projection.


Elevation views are related by projection of features from one view to another.

Elevation views are related by projection of features from one view to another.


A point on an elevation is shown as a line on the adjacent elevation and vice versa.A point on an elevation is shown as a line on the adjacent elevation and vice versa.


An architect’s scale is used to produce scaled drawings.An architect’s scale is used to produce scaled drawings.


Most tape measures have highlighted portions indicating feet. Most tape measures have highlighted portions indicating feet.


Tape measures and other rulers used in the building trades are often divided into 1/16" increments.

Tape measures and other rulers used in the building trades are often divided into 1/16" increments.


A tape measure can be used by a tradesworker to measure a component and transmit information back to the architect.

A tape measure can be used by a tradesworker to measure a component and transmit information back to the architect.


Symbols are drawn in proportion to other construction materials.Symbols are drawn in proportion to other construction materials.


Arrowheads, slashes, or dots may be used to terminate dimension lines.Arrowheads, slashes, or dots may be used to terminate dimension lines.


Walls are dimensioned to facilitate construction methods.

Walls are dimensioned to facilitate construction methods.


Partitions are dimensioned to their centerlines or faces.Partitions are dimensioned to their centerlines or faces.


Openings for windows and doors are dimensioned to their centerlines.Openings for windows and doors are dimensioned to their centerlines.

powerpoint ® presentation chapter 2 working drawing concepts sketching orthographic projections...

Documents

drawing concepts sketches

oblique drawing

view drawing

drawing concepts plane

architects scale

scaled drawings

adjacent elevation

lines of perspective