www.tuv.hu

Power transformers, power supplies

Power transformers, power suppliesManufacturers are responsible for ensuring that the products they place on the market meet all relevant regulations.According to the European Commission’s Guide to the Implementation of Directives Based on the New Approach and the Global Approach.

Process for TÜV Bauart certificate• Safety test according EN 61558-1

and relevant product standards (EN 61558-2-x)

• Factory inspection

Power transformers and supplies include:• separating transformers• isolating transformers• safety isolating transformers• auto transformers• isolating transformers for the

supply of medical locations• transformers for construction sites• toy transformers• shaver transformers• ignition transformers• transformers for switch mode supplies• others, according to EN 61558-2-x

H - 1132 Budapest, Váci út 48/A-B.phone: +36 1 4611-100

fax: +36 1 4611-199e-mail: tuv@hu.tuv.com

If you have any further questionplease contact us or take a look at the

www.tuv.hu

18

Capacitors

Cables and cords

Control devices

Electrical assemblies

Electrical car components

Installation Devices

Plugs and socket-outlets

Protective devices

Power transformers, Power suplies

Photovoltaic accessories

Switches Circuit breakers Contactors

The new service with the “click“ –TUVdotCOM

With our free internet service we offer you the oppor-tunity to make your competitive edges clearly visible.

See yourself – simply go to www.tuv.hu

heading: TUVdotCOM-Service, and enter ID 0031Use this service for your marketing and sales strategy.

Challenge us – we are at your service!

Do you market your product worldwide?The international certification procedure (IECEE CB Procedure) for conformity tests according to IEC standards for component supports your efforts to enter into the global markets. If you have a CB or CCA test report then on the basis of either of these reports you may also apply for several test marks of certification bodies without retesting your product.

How could I enter US, Australia or Japan market?Our Market Access Service (international approvals) is able to provide most national safety marks for countries all over the world. Entering for all markets through one service company.

Do you make lamps, household or office appliances, or any related components for the European market? With one single test and certification procedure you secure for yourself access to the EU market and beyond. The ENEC mark certificate will leave you with the confidence of offering products with the “European level” of safety.

How do my customers believe my product a high quality one?TÜV Bauart (Type Approved) is a component Safety certification Mark. The product obtained TÜV Bauart mark certification passed TÜV Rheinland testing and factory inspection, prove that the products meet the European and international standards of safety requirements. Bauart widely recognized by manufacturers and national certification institutions in Europe and the world.

TÜV Rheinland can perform all the necessary inspections and certification work on your behalf, as well as support you from the product development stage through production and further.

Make the most of our worldwide all-round service and reap a wide range of benefits. We will be by your side from product development right through to rollout. We can open doors and help you enter key markets all over the world.