power supply brochure - dewar electronics

Industrial Power Supplies

Enduring High Quality Products

Dewar Electronics Pty. Ltd. 18/12/2012

24 Volt Industrial Din Rail

120W to 480W

Description: With built-in PFC 85% - 90% efficiency 60% power boost ability 23.5V to 29V adjustable output range Parallel operation: SNP-D129 & SNP-D249 by optional module ; SNP-D489 built-in Patented Ring-Free ZVS & Active PFC

Model available: SNP-D129 * single phase * universal * 24V/5A, SNP-D249 * single phase * universal * 24V/10A, SNP-D489 * single phase * universal * 24V/20A

SNP-D129

24V / 5A 120W

SNP-D249

24V / 10A 240W

SNP-D489

24V / 20A 480W


Switching Adapter

SNP-POE Series / SNP-POEX-3 Series Description: SNP-POE series is an adapter for Ethernet application. It delivers power to end device through four idle line of Ethernet cable. To prevent the tiny signal line get hurt, the rated current allowed is 350mA, the trip point of over current protection is around 450mA. At no load condition, this series meets green power regulation. Model available: * SNP-POE7/-3 for12V/0.35A * SNP-POE9/-3 for 24V/0.35A * SNP-POET/-3 for 48V/0.35A

SNP-A03x(-3) Series

Description: * IEC320 C6 or C8 Input Socket * With ITE safety * Compatible to Class I/II safety & EMC * No Load Input Power < 0.5W

Model available: * SNP-A03C for 9V/3.3A * SNP-A03C-3 for 9V/3.3A * SNP-A037 for 12V/2.5A * SNP-A037-3 for 12V/2.5A * SNP-A038 for 15V/2A * SNP-A038-3 for 15V/2A * SNP-A039 for 24V/1.3A * SNP-A039-3 for 24V/1.3A * SNP-A03T for 48V/0.75A * SNP-A03T-3 for 48V/0.75A

SNP-A06 Series Description: * IEC320 C8 Input Socket * With ITE & Medical safety * Compatible to Class II safety & EMC * No load input power < 1W

Model available: * SNP-A067 for 12V/4.2A * SNP-A068 for 15V/3.6A * SNP-A069 for 24V/2.5A * SNP-A06T for 48V/1.25A

SNP-A08 Series

Description: * IEC320 C14 or C18 Input Socket * With Medical safety * CEC level IV compliant * Compatible to Class I/II safety & EMC * No load input power < 0.3W

Model available: * SNP-A087(-3) for 12V/6A * SNP-A088(-3) for 15V/5A * SNP-A085(-3) for 18V/4.5A * SNP-A089(-3) for 24V/3.3A * SNP-A08T(-3) for 48V/1.75A

SNP-A12 Series / SNP-A12x-M Series

Description: * External Desktop Adaptor * With ITE & Medical (-M) safety * Built-in active PFC * Efficiency between 84% to 87% * Compatible to Class I safety & EMC

Model available: * SNP-A127 for 12V/9A * SNP-A127-M for 12V/9A * SNP-A128 for 15V/7.5A * SNP-A128-M for 15V/7.5A * SNP-A125 for 18V/6.5A * SNP-A125-M for 18V/6.5A * SNP-A129 for 24V/5A * SNP-A129-M for 24V/5A * SNP-A12T for 48V/2.5A * SNP-A12T-M for 48V/2.5A


Switching Adapter

SNP-PA5 Series

Description: * External Desktop Adaptor * With ITE safety * Compatible to Class I safety & EMC

Model available: * SNP-PA51 for 5V/3A, 12V/2.5A, -12V/0.3A * SNP-PA53 for 5V/3.5A, 12V/2.5A * SNP-PA54 for 5V/3A, 15V/1.5A, -15V/0.3A * SNP-PA5C for 9V/5A * SNP-PA55 for 18V/3A * SNP-PA57 for 12V/4.2A * SNP-PA58 for 15V/3.5A * SNP-PA58-C for 13.8V/3.5A * SNP-PA59 for 24V/2.3A * SNP-PA5T for 48V/1.1A


General Purpose

Features : With ITE safety

With power on LED

With output adjustable trimmer

Efficiency between 75% to 85% Operation from -20 to 70 degree C by convection

SNP-C03 Series Rated 30W

Peak 45W

Model available: SNP-C03B for 3.3V/6A SNP-C036 for 5V/6A SNP-C037 for 12V/2.5A SNP-C038 for 15V/2A SNP-C039 for 24V/1.3A SNP-C03T for 48V/0.63A


Peak 90W

Model available: SNP-C06B for 3.3V/15A SNP-C066 for 5V/10A SNP-C067 for 12V/5A SNP-C068 for 15V/4A SNP-C069 for 24V/2.5A SNP-C06T for 48V/1.3A SNP-C063 for 5V/6A, 12V/2A SNP-C06A for 5V/4A, 24V/1.5A SNP-C060 for 5V/5A, 12V/1.5A, -12V/0.5A, -5V/0.5A SNP-C064 for 5V/5A, 15V/1.2A, -15V/0.5A, -5V/0.5A SNP-C06F for 5V/3A, 12V/0.9A, 24V/0.9A, -12V/0.5A


Peak 120W

Model available: SNP-CO8B for 3.3V/17A SNP-C086 for 5V/14A SNP-C087 for 12V/7A SNP-C088 for 15V/5.3A SNP-C089 for 24V/3.3A SNP-C08T for 48V/1.7A SNP-C083 for 5V/7A, 12V/3A SNP-C08A for 5V/5A, 24V/2A SNP-C080 for 5V/6A, 12V/2.5A, -12V/0.5A, -5V/0.5A SNP-C084 for 5V/6A, 15V/2A, -15V/0.5A, -5V/0.5A SNP-C08F for 5V/4A, 12V/1.5A, 24V/1A, -12V/0.5A


AC/DC DIN Rail mountable power supply

DRA18

Features: • AC/DC DIN Rail mountable power supply • UL/cUL/TUV/CE • Universal input 90~264VAC • High efficiency up to 77% • Short circuit protection • Internal input filter • 3 years warranty

CASE SIZE 90 x 22.5 x 114mm ( 3.6 x 0.89 x 4.49 inches )

CASE MATERIAL Plastic

WEIGHT 150g

MODEL NO. INPUT VOLTAGE

OUTPUT WATTAGE

OUTPUT VOLTAGE

OUTPUT CURRENT

EFF. (min.)

EFF. (typ.)

*** Single Output Models ***

DRA18-05 90~264 VAC 15 WATTS + 5 VDC 3000 mA 73% 75%




DRA18-05A 90~264 VAC 15 WATTS + 5 VDC 3000 mA 73% 75%






DRAN60

Features: • AC/DC DIN Rail mountable power supply • Universal input 85~264VAC • High efficiency up to 89% • Short circuit protection • Internal input filter • 3 years warranty

CASE SIZE 90 x 40.5 x 114mm ( 3.6 x 1.59 x 4.49 inches )


WEIGHT 340g


OUTPUT WATTAGE

OUTPUT VOLTAGE

OUTPUT CURRENT

EFF. (min.)

EFF. (typ.)


DRAN60-05 85~264 VAC 50 WATTS + 5 VDC 10000 mA 77% 79%




DRAN60-05A 85~264 VAC 50 WATTS + 5 VDC 10000 mA 77% 79%






DRA100

Features: • AC/DC DIN Rail mountable power supply • Universal input 90~264VAC • High efficiency up to 88% • Short circuit protection • Internal input filter • 3 years warranty

CASE SIZE Screw Terminal Type: 90 x 54x 114mm ( 3.6 x 2.13 x 4.49 inches )


WEIGHT 430g


OUTPUT WATTAGE

OUTPUT VOLTAGE

OUTPUT CURRENT

EFF. (min.)

EFF. (typ.)


DRA100-12A 90~264 VAC 100.8 WATTS + 12 VDC 8.4 A 82% 84%

DRA100-24A 90~264 VAC 100.8 WATTS + 24 VDC 4.2A 84% 86%

DRA100-24AL 90~264 VAC 91.2 WATTS + 24 VDC 3.8 A 83% 85%

DRA100-48A 90~264 VAC 100.8 WATTS + 48 VDC 2.1 A 86% 88%



DRAN120

Features: • AC/DC DIN Rail mountable power supply • Compact design • High efficiency up to 87% • P.F.C. function available • Parallel function available (switch) • Input voltage 115/230VAC auto select • 3 years warranty

CASE SIZE

Screw Terminal Type: 124.5 x 64 x 123.6mm ( 4.9 x 2.52 x 4.87 inches )

Detachable Connector Type: 143.5 x 64 x 123.6mm ( 5.65 x 2.52 x 4.87 inches )

CASE MATERIAL Metal

WEIGHT 920g


OUTPUT WATTAGE

OUTPUT VOLTAGE

OUTPUT CURRENT

EFF. (min.)

EFF. (typ.)


DRAN120-12x 115/230 VAC 120 WATTS + 12 VDC 10 A 82% 84%

DRAN120-24x 115/230 VAC 120 WATTS + 24 VDC 5 A 84% 86%

DRAN120-24xL 115/230 VAC 91.2 WATTS + 24 VDC 3.8 A 83% 85%

DRAN120-48x 115/230 VAC 120 WATTS + 48 VDC 2.5 A 85% 87%



DRA240

Features: • AC/DC DIN Rail mountable power supply • Compact design • High efficiency up to 90% • P.F.C. function available • Parallel function available (switch) • Input voltage 115/230VAC auto select • 3 years warranty

CASE SIZE

Screw Terminal Type: 124.5 x 83.5 x 123.6mm ( 4.9 x 3.29 x 4.87 inches )

Detachable Connector Type: 143.5 x 83.5 x 123.6mm ( 5.65 x 3.29 x 4.87 inches)

CASE MATERIAL Metal

WEIGHT 1380g


OUTPUT WATTAGE

OUTPUT VOLTAGE

OUTPUT CURRENT

EFF. (min.)

EFF. (typ.)


DRA240-24x 115/230 VAC 240 WATTS + 24 VDC 10 A 87% 89%

DRA240-48x 115/230 VAC 240 WATTS + 48 VDC 5 A 88% 90%



DRA480

Features: • AC/DC DIN Rail mountable power supply • Compact design • High efficiency up to 90% • Active P.F.C. function • Parallel function available (switch) • Universal input voltage • 3 years warranty

CASE SIZE

Screw Terminal Type: 124.5 x 175.5 x 123.6mm ( 4.9 x 6.91 x 4.87 inches )

Detachable Connector Type: 143.5 x 175.5 x 123.6mm ( 5.65 x 6.91 x 4.87 inches)

CASE MATERIAL Metal

WEIGHT 1920g


OUTPUT WATTAGE

OUTPUT VOLTAGE

OUTPUT CURRENT

EFF. (min.)

EFF. (typ.)


DRA480-24x 90~264 VAC 480 WATTS + 24 VDC 20 A 86% 89%

DRA480-48x 90~264 VAC 480 WATTS + 48 VDC 10 A 87% 90%


Type EGPT Stabilized DC power supplies, primary switch mode (slim shape)

Application Control circuits, switchgear equipment, PLCs, etc. are supplied safely by these DC power supplies even under adverse conditions. If two power supplies with the same rated current and output voltage are connected in parallel, a very good power (weight ratio) is obtained (small size, low weight).


Construction

For DIN rail TS 35 (DIN EN 50022) Safety: VDE 0805/EN 60950/IEC 950

Permanently resistant to short circuit and permanently stable at no load

Interference emission: EN 61000-6 -3/-4, (class B)

Interference immunity: EN 61000-6 -1/-2

High efficiency PFC norm: (harmonics) EN 61000-3-2 class A

Specifications 1,25 A 2 A

Article no.: 750-0012 750-0020*

Input voltage: 94 - 265 VAC / 135 - 370 VDC Wide range input

94 - 265 VAC / 135 - 370 VDC Wide range input

Frequency: 47 - 63 Hz 47 - 63 Hz

Rated input current: 0,35 A at 230 V AC 0,6 A at 230 VAC AC

Starting current inrush: < 1.5 A2s < 1.5 A2s

Output voltage SELV 24 V ± 3% DC DC 24 V ± 3% DC DC

Output current: 0 - 1.25 A DC 0 - 2 A DC DC

Output power: 30 W (max.) 48 W (max.)

Ripple: Ripple: < 50 mV < 50 mV Ripple: < 50 mV < 50 mV

Current limitation typ.: 1.5 A (permanently short circuit resistant)

2.5 A (permanently short circuit resistant)

Protection class: II II Protection index: IP 20 IP 20 Efficiency typ.: 85% 89% Mains buffering: > 80 ms / 230 V AC 70 ms / 230 V AC > 15 ms / 115 VAC > 8 ms / 115 V AC > 10 ms / 120 V AC Temperature range 0 to 70°C

(free convection) -10°C to +70°C (free convection)

Leakage current: < 0.25 mA (at 47 - 63 Hz) Load control: < 0.5% at 0 A to INenn Mains regulation: < 0.2% at Uein ±15% Dynamic response: < 2 ms at 10 - 90% INenn /overshoot < 2% Overload resistant yes Stable at no load: yes Output derating: 2,5 % / K from + 60°C Storage temperature: - 25°C to + 85°C Mounting position: wall-mounted, Input terminals up

Overview

Type Article no. Line voltage

V

Output voltage V (DC)

Total current

A (DC)

Total- weight appr. kg

Dimensions

a b c

approx. mm

EGPT 2401,25 750-0012 230 24 1.25 0.2 45 105 72

EGPT 2402 750-0020 230 24 2.0 0.2 45 105 72


Type EGPT

Cosmo Stabilized DC power supplies primary switch mode (slim shape)

Application

Control circuits, switchgear equipment, PLCs, etc. are supplied safely by these DC power supplies even

under adverse conditions. Two power supplies with the same rated current and output voltage can be

connected. Floating operation with battery at half the rated current and thus uninterruptible power supply

is also possible. a very good power density (weight ratio) is obtained (small size, low weight).


Construction

For DIN rail TS 35 (DIN EN 50022) Overload indicator (LED) Permanently resistant to short circuit and

permanently stable at no load Safety: VDE 0805/EN 60950/IEC 950 Interference emission: EN 61000-6 -3/-4, (class B)

High efficiency Interference immunity: EN 61000-6 -1/-2

Status indicator (LED) PFC norm: (harmonics) EN 61000-3-2 class A

Specifications 5A 10 A 20 A

Article no.: 751-2405 751-2410 751-2420*

Input voltage: 115/230 VAC (265 - 370 VDC)** 115/230 VAC (265 - 370 VDC)** 230 VAC

Input voltage range: 93-132 VAC; 187-265 VAC 93-132 VAC; 187-265 VAC 195-265 VAC

Frequency: 47 - 63 Hz 47 - 63 Hz 47 - 63 Hz

Rated input current: 0.9 A at 230 VAC 1.8 A at 230 VAC 3.3 A at 230 VAC

Starting current inrush: < 30 A < 30 A < 30 A (at 230 VAC)

Power factor: 0.5 capacitive/230 VAC 0.5 capacitive/230 VAC 0.82 capacitive/230 VAC

Output voltage SELV 24 VDC ± 1% 24 VDC ± 1% 24 VDC ± 1%

Setting range typ.: 22 - 30 V 22 - 30 V 23 - 29 V

Output current: 0 - 5 ADC 0 - 10 ADC 0 - 20 ADC

Output power: 120 W (max.) 240 W (max.) 480 W (max.)

Ripple: < 50 mV < 50 mV < 50 mV

Current limitation typ.: 6 A (permanently short circuit resistant)

12 A (permanently short circuit resistant)


Protection class: I I I

Protection index: IP 20 IP 20 IP 20

Efficiency typ.: 89% 90% 89%

Mains buffering: > 20 ms / 230 VAC > 35 ms / 230 VAC > 20 ms / 230 VAC

> 15 ms / 115 VAC > 30 ms / 115 VAC

Temperature range -10 to 70°C -10 to 70°C -10 to 70°C (free convection) (free convection) (free convection)

Leakage current: < 0.75 mA (at 47 - 63 Hz) < 3.5 mA (at 47 - 63 Hz) < 3.5 mA (at 47 - 63 Hz)

Load control: < 1% at 0 A to Inom < 1% at 0 A to Inom < 1% at 0 A bis Inom

Mains regulation: < 0.2% at Uon ± 15% < 0.2% at Uon ± 15% < 0.2% at Uon ± 15%

Dynamic response: < 2 ms at 10 - 90% Inom < 2 ms at 10 - 90% Inom < 2 ms at 10 - 90% In om Overshoot < 2% Overshoot < 2% Overshoot < 2%

Overload resistant: yes yes yes

Stable at no load: yes yes yes

Output derating: 2,5% / K at +60°C 2,5% / K at +60°C 2,5% / K at +60°C

Storage temperature: -25°C to + 85°C -25°C to + 85°C -25°C to + 85°C

Mounting position: wall-mounted, wall-mounted, wall-mounted, input terminals up input terminals up input terminals up

Overview


V


Total current

A (DC)


Dimensions a b c

approx. mm

EGPT cosmo 2405 751-2405 230 24 5 0.9 70 139 132

EGPT cosmo 2410 751-2410 230 24 10 1.1 70 164 147.5

EGPT cosmo 2420* 751-2420 230 24 20 2.0 86 173 227


Type EGPT

Competent Stabilized DC power supplies primary switch mode (flat shape)

Application

Control circuits, switchgear equipment, PLCs, etc. are supplied safely by these DC power supplies even

under adverse conditions. Two power supplies with the same rated current and output voltage can be

connected. Floating operation with battery at half the rated current and thus uninterruptible power supply

is also possible. a very good power density (weight ratio) is obtained (small size, low weight).


Construction

For DIN rail TS 35 (DIN EN 50022) Safety: VDE 0805/EN 60950/IEC 950

Permanently resistant to short circuit and permanently stable at no load

Interference emission: EN 61000-6 -3/-4, (class B) Interference immunity: EN 61000-6 -1/-2

High efficiency

Specifications 2,5A 5A 10 A 20 A

Article no.: 750-0025 750-0050 750-0001 750-0002

Input voltage: 94 - 265 VAC / 135 - 370 VDC wide range input

94 - 265 VAC / 135 - 370 VDC wide range input

115/230 VAC ± 15%** switchable (soldering jumper)

230 VAC ± 15%

Frequency 47 - 63 Hz 47 - 63 Hz 47 - 63 Hz 47 - 63 Hz

Rated input current: 0.6 A at 230 VAC 1.23 A at 230 VAC 2.25 A at 230 VAC 4.2 A at 230 VAC

Starting current inrush: < 30 A < 30 A < 30 A < 30 A

Power factor: 0.52 capacitive/230 VAC 0.52 capacitive/230 VAC 0.52 capacitive/230 VAC 0.52capacitive/230 VAC

Output voltage SELV: 24 VDC ± 1% 24 VDC ± 1% 24 VDC ± 1% 24 VDC ± 1%

Setting range, typ.: 22.5 - 27.5 V 22.5 - 27.5 V 22.5 - 27.5 V 22.5 - 27.5 V

Output current: 0 - 2.5 ADC 0 - 5 ADC 0 - 10 ADC 0 - 20 ADC

Output power: 60 W (max.) 120 W (max.) 240 W (max.) 480 W (max.)

Ripple: < 100 mV < 100 mV < 100 mV < 100 mV

Current limitation typ.: 3 A (permanently short circuit resistant)


12.5 A (permanently short circuit resistant)


Protection class: I I I I

Protection index: IP 20 IP 20 IP 20 IP 20

Efficiency typ.: 86% 86% 89% 88%

Mains buffering: > 80 ms / 230 VAC > 15 ms / 115 VAC

> 80 ms / 230 VAC > 15 ms / 115 VAC

> 80 ms / 230 VAC > 15 ms / 230 VAC

Temperature range: 0 to 70°C (free convection)

0 to 70°C (free convection)



Leakage current: < 0.75 mA (at 47 - 63 Hz) < 0.75 mA (at 47 - 63 Hz) < 0.75 mA (at 47 - 63 Hz) < 3.5 mA (at 47 - 63 Hz)

Load control: < 1% at 0 A to Inom < 1% at 0 A to Inom < 1% at 0 A to Inom < 1% at 0 A to Inom

Mains regulation: < 0.2% at Uon ± 15% < 0.2% at Uon ± 15% < 0.2% at Uon ± 15% < 0.2% at Uon ± 15%

Dynamic response: < 2 ms at 10 - 90% Inom < 2 ms at 10 - 90% Inom < 2 ms at 10 - 90% Inom < 2 ms at 10 - 90% Inom

Overshoot < 2% Overshoot < 2% Overshoot < 2% Overshoot < 2%

Overload resistant: yes yes yes

Stable at no load: yes yes yes

Output derating: 2,5% / K at +60°C 2,5% / K at +60°C 2,5% / K at +60°C 2,5% / K at +60°C

Storage temperature: -25°C to + 85°C -25°C to + 85°C -25°C to + 85°C -25°C to + 85°C

Mounting position: wall-mounted, input terminals up

wall-mounted, input terminals up



Overview


V


Total current

A (DC)


Dimensions a b c

approx. mm

EGPT 2402.5 750-0025 230 24 2.5 0.6 123 105 65

EGPT 2405 750-0050 230 24 5 0.8 123 105 86

EGPT 2410 750-00015 230 24 10 1.2 123 105 86

EGPT 2420* 750-0002 230 24 20 1.9 153 130 86

Dewar Electronics Pty Ltd is a 100% privately owned Australian company,

established in March 1972. To complement its manufactured products, Dewar also

distributes a range of quality intelligent electronic devices, switches and power

supplies from various sources worldwide.

As a valued customer, you can trust Dewar to meet your product needs through

the delivery of quality, reliable products, solutions and services.

Enduring High Quality Products

Dewar Electronics Pty. Ltd. 32 Taylors Road, Croydon, Victoria 3136 Australia

Phone: +61 3 9725 3333 Fax: +61 3 9725 6003 Email: [email protected] www.dewar.com.au

power supply brochure - dewar electronics

Documents