potain igo 50fem 1.001-a3. 2 features variable frequency drives variable frequency drives provide a...
TRANSCRIPT
Potain Igo 50Product Guide
Features• 4000 kg (8818 lb)
maximum capacity
• 1 100 kg (2425 lb) capacity at
131 ft (40 m)
• 40 m (131 ft) maximum operating
hook radius
• 33,8 m (111 ft) maximum hook
height with jib set at 20°
• 23,2 m (76 ft) maximum hook
height with jib horizontal
FEM 1.001-A3
2
Features
Variable frequency drivesVariable frequency drives provide a lower initial current rush and progressive speed change which can be supported by a smaller generator set than comparable cranes.
Optional cabOptional fixed height cab and access ladder allows operator to view the job site from a more advantageous position.
North American Highway AxleSimplify road transport with the North American High-way Axle and adaptation kit 202. Multiple pin positions for optimal weight distribution, DOT compliance and an optional attachable 3rd axle make this an ideal solution for your transportation needs.
Efficiency and reliabilityThe Igo 50 has a simple and quick set up. While onsite, the crane works quietly, reducing interruption to the surrounding area.
Contents
Specifications 4
Transport 5
Dimensions 7
Load charts 8
Crane profile 9
Mechanisms 10
Metric dimensions 11
Metric load charts 12
Metric crane profile 13
Metric mechanisms 14
Symbols glossary 15
4*Denotes optional equipment
**Requires optional anemometer
Specifications
Jib
40 m (131 ft) radius standard bi-folding offsettable lattice jib. Removable jib extensions can allow additional horizontal jib operating radii of 28 m (92 ft) or 36 m (118 ft).Two (2) tie bar lines with adjustable lengths allow jib to be offset 8˚ and 20˚. Folds to 14 m (46 ft) radius or 29,6 m (97 ft) radius. Two (2) erecting speeds controlled from the remote, opening and aligning are carried out automatically by two (2) hydraulic cylinders.
Galvanized folding mast with hydraulic cylinder for erection. Two (2) erecting speeds controlled from the remote. No locking necessary. 360˚ rotation possible during erection.
Outriggers swing and lock into position. 4,5 m (14.8 ft) square outrigger spread with 2,5 m (8.2 ft) slewing radius. Level bubble integrated into the chassis. Outrigger pads are stowed on the crane during transport (540 x 410 mm [21 in x 16 in]). *Optional outrigger pads available at heights of 200 mm (7.9 in) and 400 mm (15.7 in).
5640 kg (12,434 lb) concrete ballast standard. Crane with standard ballast is able to be transported on several *axle sets. *Additional 22 800 kg (50,268 lb) concrete ballast optional.
480 volt, 60 Hz measured at the turntable. Earth rod and electric cable stowed on the crane during transport.
SM/DM block for 2 or 4-part line. One pin removal to change between SM and DM. Pure SM1 (section of hook block removed) is possible with gain of 100 kg (220 lb) lifting capacity.
Wireless remote control provides information to the operator about **wind speed, radius, hook height, load, and moment. Lights and buzzers alert the operator when nearing limits of operation.
Auxiliary remote attached by umbilical cord ensures continual operation in case of battery or other malfunction of the wireless remote control.
Electronic wind speed meter to alert the operator of windspeed conditions. Provides selective display on the radioremote. Maximum in service wind speed is 72 km/h(45 mph) and maximum out of service wind speed is150 km/h (93 mph).
RVF 51 Optima+ slewing mechanism with maximum swing speed of 0.8 RPM. Progressive control of speed with counter-slewing possible, anti-load swinging system makes aligning the load and jib easier. Multiple RPM speeds possible depending upon parameter selected.
15 LVF 10 Optima: 15 HP variable frequency hoist with 1t (1.1 USt) line pull. 3 notch, progressive speed change according to the accelerating or decelerating ramps. Optima allows the hoist to adapt its speed to the weight of the load.
3 DVF 5: 3 HP variable frequency hoist with 500 kg (1102 lb) line pull. 2 notch winch, progressive speed change according to acceleration or deceleration ramps controlled by the frequency converter.
Four (4) cylinders and two (2) pumps linked to solenoid valves. Two (2) cylinders for unfolding the jib, one (1) for slewing the derrick, and one (1) for raising the mast.
* STANDARD NORTH AMERICAN SPECIFICATION: includes hydraulic ballasting derrick, high sole plates, Dialog Wind, 12 concrete counterweight slabs, pre-equipment for interference system and Top Zone.
* High sole plates * Fixed height cab and access ladder* Transport axles and kits* Top Zone* Top Tracing* Dialog Wind
Mast
Chassis
*Ballast
Electrical requirement
Reeving
*Optional Anemometer
Controls
Swing
Hoist
Trolley
Hydraulic equipment
*Optional equipment
Uses the hoisting winch to ballast the crane or dismantle/attach *fifth-wheel. Stows alongside the jib during transport.
Optional hydraulic ballasting derrick
Axle sets are available for both jobsite and highway applications. Jobsite axles are rated at either 10 kph (6 mph) or 25 kph (15.5 mph); highway axle set is rated at 80 kph (50 mph).
*Optional transport axle sets
5Potain Igo 50
NOTE: Dimensions and weights may vary due to manufacturing tolerances.
Transport
13,98 m (45.9 ft)
P2 P P1
15,41 m (50.6 ft)
13,98 m (45.9 ft)
5,24 m (17.2 ft)5,88 m (19.3 ft)3,65 m (12 ft)
0,7 m (2.3 ft)1,25 m (4.1 ft)
4 m
(13.
1 ft)
2,5 m (8.2 ft)
2,45 m (8 ft)
P2 P P1
16,39 m (53.8 ft)
5,87 m (19.3 ft)
5,25 m (17.2 ft)
2,75 m (9 ft)
Max
: 3,
57 m
(11.7
ft)
Min
: 3,
42 m
(11.
2 ft
)
Max: 0,35 m (1.1 ft)Min: 0,2 m (0.7 ft)
2,5 m (8.2 ft)
2,4 m (7.9 ft)
DJ100 / S12010 km/h (6 mph)
SL122 / J215M80 km/h (50 mph)
P2 P P1
15,41 m (50.6 ft)
13,98 m (45.9 ft)
6,19 m (20.3 ft)4,93 m (16.2 ft)3,65 m (12 ft)
0,7 m (2.3 ft)1,25 m (4.1 ft)
4 m
(13.
1 ft)
2,5 m (8.2 ft)
2,45 m (8 ft)
6NOTE: Dimensions and weights may vary due to manufacturing tolerances.
Transport
Chassis data (in transport position)
DJ100/S12025 kph (15.5 mph)
SL122/J215M80 kph (50 mph)
North AmericanHighway Axle
meters feet meters feet meters feet
Overall length 16,39 53.8 15,41 50.6 15,41 50.6
Overall height Max: 3,57Min: 3,42
Max: 11.7Min: 11.2
4 13.1 4 13.1
Overall width 2,5 8.2 2,5 8.2 2,6 8.2
Overhang 5,87 19.3 6,19 20.3 TBA TBA
North American Highway Axle
Weights
Crane weight less counterweight
14 760 kg 32,540 lb
Counterweight for operation
28 440 kg 62,700 lb
Crane with counterweight 43 240 kg 95,328 lb
Crane with transport equipment
DJ100/S12025 kph (15.5 mph)
SL122/J215M80 kph (50 mph)
North AmericanHighway Axle
In transport with minimal counterweight:
kilograms pounds kilograms pounds kilograms pounds
Gross (P) 21 655 47,741 23 650 52,139 TBA TBA
Rear (P1) 11 725 25,849 15 400 33,951 TBA TBA
Front (P2) 9930 21,892 8250 18,188 TBA TBA
Counterweight intransport (2 blocks):
5640 12,434 5640 12,434 TBA TBA
*Other axle sets are available.
15,41 m (50.6 ft)
13,98 m (45.9 ft) 2,5 m (8.2 ft)
2,6 m (8.5 ft)1,25 m (4.1 ft)
4 m
(13.
1 ft)
3,65 m (12 ft) TBA TBA
P1PP2
0,7 m (2.3 ft)
131 ft 76 ft21
1400 kg
118 ft
97 ft
4409 lb52 ft
46 ft
14.8 ft x 14.8 ft
16.7 ft
86 ft
R = 8.2 ft
5.7 ft
8818 lb
92 ft
46 ft
4.6 ft
247 ft1
8818 lb
43 ft9.8 ft68 ft
70 ft
73 ft
3748 lb
8818 lb
8818 lb
73 ft
2425 lb
75 ft
3086 lb
7Potain Igo 50
Dimensions
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane
F1
F1 30.3 USt 23.9 USt
32,540 lb
62,702 lb(2 x 6217 lb + 12 x 4189 lb)
8
Load charts
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
131 ft 10 74 78 82 89 98 105 115 121 130 ft4409 4134 3924 3571 3131 2888 2579 2403 2205 lb
4409 4189 3825 3373 3131 2811 2624 2425 lb
118 ft 10 82 86 89 98 105 115 117 ft4409 4167 4023 3549 3274 2932 2866 lb
4409 4266 3770 3494 3153 3086 lb
92 ft 10 91 ft4409 lb4409 lb
131 ft 10 80 84 89 96 ft118 ft 4409 4167 3902 3527 lb
4409 4123 3748 lb
131 ft118 ft 10 46 ft92 ft 4409 lb
4409 lb
10 43 46 49 52 56 59 62 66 75 79 82 89 98 105 115 121 131 ft8818 8080 7419 6845 6360 5930 5556 5214 4409 4134 3968 3616 3175 2932 2612 2436 2205 lb
4409 4134 3968 3616 3175 2932 2612 2436 2205 lb4409 4233 3869 3417 3164 2844 2668 2425 lb
10 47 49 52 56 59 62 66 72 79 83 87 89 98 105 115 118 ft8818 8311 7683 7132 6658 6239 5864 5225 4707 4409 4167 4079 3594 3318 2965 2866 lb
4409 4167 4079 3594 3318 2965 2866 lb4409 4321 3825 3549 3197 3086 lb
10 52 56 59 62 66 72 75 82 85 89 92 ft8818 8014 7485 7011 6592 5886 5578 5049 4828 4608 4409 lb
4409 lb4409 lb
131 ft 10 46 49 52 56 59 62 66 72 81 82 85 89 97 ft118 ft 8818 8058 7441 6911 6449 6041 5677 5060 4409 4332 4167 3946 3527 lb
4409 4332 4167 3946 3527 lb4409 4178 3748 lb
131 ft 10 46 ft8818 lb4409 lb4409 lb
118 ft 10 46 ft8818 lb4409 lb4409 lb
92 ft 10 46 ft8818 lb4409 lb4409 lb
131 ft 10 123 ft2205 lb2425 lb
118 ft 10 111 ft2205 lb2425 lb
92 ft 10 87 ft2205 lb2425 lb
131 ft 10 92 ft118 ft 2205 lb
2425 lb
131 ft118 ft 10 44 ft92 ft 2205 lb
2425 lb
2425 lb
118 ft92 ft 131 ft
3086 lb4409 lb8818 lb
46 ft
3748 lb
97 ft
8°
3748 lb
96 ft
80 ft
117 ft
3086 lb
83 ft
2425 lb
86 ft
130 ft
46 ft
4409 lb
72 ft
4409 lb
91 ft
79 ft
20°
111 ft
123 ft
2425 lb111 ft
2425 lb
106 ft
92 ft
2425 lb
98 ft44 ft
2425 lb
80 ft
87 ft
2425 lb
97 ft
9Potain Igo 50
Crane profile
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane
125 ft
20 13 7 0 7 13 20 26 33 39 46 52 59 66 72 79 85 92 98 105 112 118 125 131 138 ft
7
13
20
26
33
39
46
52
59
66
72
79
85
92
98
105
112
118
0
≤ 31 mph
Igo 50: Raised jibs
20 13 7 0 7 13 20 26 33 39 46 52 59 66 72 79 85 92 98 105 118 131 ft
131 ft
125
118
112
105
98
92
85
79
72
66
59
52
46
39
33
26
20
13
7
0
Jib raised 20°
123 ft111 ft92 ft
87 ft
44 ft
10 ft
20° 80 ft
97 ft98 ft
106 ft111 ft
20 13 7 0 7 13 20 26 33 39 46 52 59 66 72 79 85 92 98 105 118 131 ft
131 ft
125
118
112
105
98
92
85
79
72
66
59
52
46
39
33
26
20
13
7
0
8°
86 ft
130 ft117 ft91 ft
96 ft
46 ft
83 ft80 ft79 ft
72 ft
9.8 ft
Jib raised 8°
10
Mechanisms
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
15 LVF 10 Optima
IEC 60204-32
400 V (+10% -10%) 50 Hz / 480 V (+6% -10%) 60 Hz 17 kVA
19 kVA
4409 lb
+25 %
1102 2205
fpm
0
218
167
102
0
480 V - 60 Hz hp kW
15 LVF 10 Optima
ft/min 12 59 102 167 218 6 30 51 84 10815 11
lb 4409 4409 4409 2205 1102 8818 8818 8818 4409 2205
3 DVF 5 ft/min49 - 98 - 148 (0 2205 lb)
49 - 98 - 135 (2205 8818 lb)3 2.2
RVF 51 Optima+ rpm 0 0.8 5.5 4
11Potain Igo 50
Metric dimensions
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane
40 m 23,2 m21
1400 kg
36 m
29,6 m
2000 kg15,7 m
14 m
4,5 m x 4,5 m
5,09 m
26,3 m
R = 2,5 m
1,75 m
4000 kg
28 m
13,9 m
1,4 m
214,3 m1
4000 kg
13 m3 m20,8 m
21,3 m
22,4 m
1700 kg
4000 kg
4000 kg
22,3 m
1100 kg
22,9 m
1400 kg
F1
F1 27,5 t 21,7 t
14 760 kg
28 440 kg(2 x 2820 kg + 12 x 1900 kg)
12
Metric load charts
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
40 m 3 22,7 23,9 25 27 30 32 35 37 39,6 m2000 1875 1780 1620 1420 1310 1170 1090 1000 kg
2000 1900 1735 1530 1420 1275 1190 1100 kg
36 m 3 25,1 26,3 27 30 32 35 35,6 m2000 1890 1825 1610 1485 1330 1300 kg
2000 1935 1710 1585 1430 1400 kg
28 m 3 27,7 m2000 kg2000 kg
40 m 3 24,4 25,5 27 29,3 m36 m 2000 1890 1770 1600 kg
2000 1870 1700 kg
40 m36 m 3 13,9 m28 m 2000 kg
2000 kg
3 13 14 15 16 17 18 19 20 23 24,2 25 27 30 32 35 37 40 m4000 3665 3365 3105 2885 2690 2520 2365 2000 1875 1800 1640 1440 1330 1185 1105 1000 kg
2000 1875 1800 1640 1440 1330 1185 1105 1000 kg2000 1920 1755 1550 1435 1290 1210 1100 kg
3 14,3 15 16 17 18 19 20 22 24 25,3 26,6 27 30 32 35 36 m4000 3770 3485 3235 3020 2830 2660 2370 2135 2000 1890 1850 1630 1505 1345 1300 kg
2000 1890 1850 1630 1505 1345 1300 kg2000 1960 1735 1610 1450 1400 kg
3 15,7 17 18 19 20 22 23 25 26 27 28 m4000 3635 3395 3180 2990 2670 2530 2290 2190 2090 2000 kg
2000 kg2000 kg
40 m 3 13,9 15 16 17 18 19 20 22 24,7 25 25,8 27 29,6 m36 m 4000 3655 3375 3135 2925 2740 2575 2295 2000 1965 1890 1790 1600 kg
2000 1965 1890 1790 1600 kg2000 1895 1700 kg
40 m 3 14 m4000 kg2000 kg2000 kg
36 m 3 14 m4000 kg2000 kg2000 kg
28 m 3 14 m4000 kg2000 kg2000 kg
40 m 3 37,6 m1000 kg1100 kg
36 m 3 33,9 m1000 kg1100 kg
28 m 3 26,4 m1000 kg1100 kg
40 m 3 27,9 m36 m 1000 kg
1100 kg
40 m36 m 3 13,4 m28 m 1000 kg
1100 kg
1100 kg
36 m28 m 40m
1400 kg2000 kg4000 kg
14 m
1700 kg
29,6 m
8°
1700 kg
29,3 m
24,4 m
35,6 m
1400 kg
25,4 m
1100 kg
26,2 m
39,6 m
13,9 m
2000 kg
22 m
2000 kg
27,7 m
24,2 m
20°
33,8 m
37,6 m
1100 kg33,9 m
1100 kg
32,2 m
27,9 m
1100 kg
29,8 m13,4 m
1100 kg
24,5 m
26,4 m
1100 kg
29,6 m
13Potain Igo 50
Metric crane profile
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane
Igo 50: Raised jibs
38 m
6 4 2 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 m
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
0
≤ 50 km/h
6 4 2 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 m
40 m
38
36
34
32
30
28
26
24
22
20
18
16
14
12
10
8
6
4
2
0
Jib raised 20°
37,6 m33,9 m27,9 m
26,4 m
13,4 m
3 m
20° 24,5 m
29,6 m29,8 m
32,2 m33,8 m
6 4 2 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 m
40 m
38
36
34
32
30
28
26
24
22
20
18
16
14
12
10
8
6
4
2
0
8°
26,2 m
39,6 m35,6 m27,7 m
29,3 m
13,9 m
25,4 m24,4 m24,2 m
22 m
3 m
Jib raised 8°
14
Metric mechanisms
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
15 LVF 10 Optima
IEC 60204-32
400 V (+10% -10%) 50 Hz / 480 V (+6% -10%) 60 Hz 17 kVA
19 kVA
2000 kg
+25 %
500 1000
m/min
0
66,5
51
31
0
480 V - 60 Hz hp kW
15 LVF 10 Optima
m/min 3,6 18 31 51 66,5 1,8 9 15,5 25,5 3315 11
kg 2000 2000 2000 1000 500 4000 4000 4000 2000 1000
3 DVF 5 m/min15 - 30 - 45 (0 1000 kg)
15 - 30 - 41 (1000 4000 kg)3 2,2
RVF 51 Optima+ rpm 0 0,8 5,5 4
15Potain Igo 50
Symbols glossary
Anemometer
Ballast
Chassis
Controls
Hydraulic equipment
Electrical equipment
Hoisting
Jib
Mast
Consult us
Optional transport axle sets
Options
Reactions in service
Reactions out of service
Reeving
Required power
Slewing
Standard equipment
Total ballast weight
Trolleying
Weight without load, without ballast, without transport axles, with max. jib and standard height
Slewing radius
Optional hyrdaulicballasting derrick
R
Reeving 2-part
Reeving 4-part
©2014 ManitowocForm No. Igo 50 PGPart No. 04-029-1M-0814 www.manitowoccranes.com
This document is non-contractual. Constant improvement and engineering progress make it necessary that we reserve the right to make specification, equip-ment, and price changes without notice. Illustrations shown may include optional equipment and accessories and may not include all standard equipment.
Regional offices
ChinaShanghai, China Tel: +86 21 6457 0066Fax: +86 21 6457 4955
Greater Asia-Pacific Singapore Tel: +65 6264 1188 Fax: +65 6862 4040
Europe, Middle East, Africa Dardilly, France Tel: +33 (0)4 72 18 20 20 Fax: +33 (0)4 72 18 20 00
Americas Manitowoc, Wisconsin, USA Tel: +1 920 684 6621 Fax: +1 920 683 6277
Shady Grove, Pennsylvania, USA Tel: +1 717 597 8121 Fax: +1 717 597 4062
Regional headquarters
Manitowoc Cranes
ChinaBeijingChengduGuangzhouXian
Greater Asia-PacificAustraliaBrisbaneMelbourneSydneyIndiaChennaiDelhiHyderabadPuneKoreaSeoulPhilippinesMakati CitySingapore
FactoriesBrazilPasso FundoChinaTaiAnZhangjiagangFranceCharlieuMoulinsGermanyWilhelmshavenIndiaPuneItalyNiella TanaroPortugalBaltarFânzeresUSAManitowoc Port WashingtonShady Grove
AmericasBrazilAlphavilleMexicoMonterreyChileSantiago
Europe, Middle East, AfricaFranceBaudemontCergyDecinesGermanyLangenfeldItalyLainateNetherlandsBredaPolandWarsawPortugalBaltarRussiaMoscowSouth AfricaJohannesburgU.A.E.DubaiU.K.Buckingham