post hole digger - great plains...26. 317-071a hd25 post hole digger assy includes items #16 through...

Post Hole DiggerPD10, PD15, PD25, PD35, HD25 & HD35

18970 317-048PParts Manual

Read the Operator's Manual entirely. Whenyou see this symbol, the subsequentinstructions and warnings are serious - followwithout exception.Your life and the lives ofothers depend on it!

© Copyright 2020 Printed 05/13/20

Cover photo may show optional equipment notsupplied with standard unit.

Table of Contents Part Number Index

Section 1: Introduction.................................................6Using This Manual...............................................................6Manual Replacement Information.......................................6Manual Revisions................................................................6Touch-up Paint....................................................................6Hardware Legend................................................................7Replacement Hardware......................................................7Serial Numbers...................................................................7Part Number Service Coding..............................................7

HYDRAULIC DRIVESection 2: Frames..........................................................8

3-Point Assembly................................................................8Bucket Mount Assembly....................................................10Gearbox Rest Components...............................................12Pivot Clevis W/Pin.............................................................14Quick Hitch Mount.............................................................16Skid Steer Mount (HD25/35).............................................18Tractor Loader Mount (HD25/35)......................................20

Section 3: Gearboxes..................................................22Gearbox (826-304C) OMNI...............................................22Gearbox (826-467C) Comer.............................................24

Section 4: Hydraulic Motors.......................................26Hydraulic Motor (810-414C) & (810-415C) Ross..............26Hydraulic Motor (810-528C) White....................................28Hydraulic Motor (810-529C) White....................................30Hydraulic Motor (850-250C) White....................................32Hydraulic Motor (850-251C) White....................................34Hydraulic Motor (850-252C) White....................................36

Section 6: Decals.........................................................383-Point Mount Decal Placement........................................38Bucket Mount Decal Placement........................................40Quick Hitch Mount Decal Placement.................................42Touch-up Paints - LP.........................................................44

Section 6: Decals & Touch-up Paint...........................463-Point Mount Decal Placement........................................46Bucket Mount Decal Placement........................................48Quick Hitch Mount Decal Placement.................................50Touch-up Paints - LP.........................................................52

Section 7: Options & Accessories.............................5412" Bolt-On Rock Head (317-276A)..................................5415" Bolt-On Rock Head (317-277A)..................................5618" Bolt-On Rock Head (317-278A)..................................5824" Bolt-On Rock Head (317-279A)..................................606" Bolt-On Rock Head (317-274A)....................................629" Bolt-On Rock Head (317-275A)....................................64Auger.................................................................................66Down Pressure Update Kit 317-190A...............................68Down Pressure W/ Up Relief PD25/35 & HD25/35...........70

Down Pressure W/O Up Relief HD25 & HD35 3-Point......72Hydraulic Cylinder (810-005C) Energy.............................74QA Mount Without Hosses................................................76Rock Auger........................................................................78

PTO DRIVESection 2: Frames........................................................80

Frame PD10......................................................................80Frame PD15......................................................................82Frame PD25 & PD35.........................................................84

Section 3: Drivelines...................................................87Driveline (826-163C) Eurocardan Shear Bolt....................88Driveline (826-164C) Eurocardan Shear Bolt....................90Driveline (826-173C) Eurocardan Clutch..........................92Driveline (826-407C) Eurocardan Shear Bolt....................94Driveline (826-879C) Comer.............................................96Driveline (826-887C) Comer.............................................98Driveline (826-890C) Comer...........................................100

Section 4: Gearboxes................................................102Gearbox (826-165C) ITG................................................102Gearbox (826-166C) ITG................................................104Gearbox (826-167C) ITG................................................106Gearbox (826-211C) OMNI.............................................108Gearbox (826-212C) OMNI.............................................110Gearbox (826-312C) Comer (New).................................112Gearbox (826-312C) Comer (Old)..................................114Gearbox (826-312C) OMNI.............................................116Gearbox (826-337C) Comer...........................................118Gearbox (826-446C) Comer...........................................120

Section 5: Decals.......................................................122Decal Placement.............................................................122Touch-up Paints - LP.......................................................124

Section 6: Options & Accessories...........................12612" Bolt-On Rock Head (317-276A)................................12615" Bolt-On Rock Head (317-277A)................................12818" Bolt-On Rock Head (317-278A)................................1306" Bolt-On Rock Head (317-274A)..................................1329" Bolt-On Rock Head (317-275A)..................................134Alignment Handle............................................................136Alignment Handle............................................................138Auger...............................................................................140Auger...............................................................................142Down Pressure Update Kit 317-190A.............................144Down Pressure W/ Up Relief PD10.................................146Down Pressure W/ Up Relief PD15.................................148Down Pressure W/ Up Relief PD25/35 & HD25/35.........150Down Pressure W/O Up Relief........................................152Down Pressure W/O Up Relief........................................154Down Pressure W/O Up Relief........................................156

© Copyright 2020. All rights reserved.

Land Pride provides this publication “as is” without warranty of any kind, either expressed or implied.While every precaution has been taken in the preparation of this manual,Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. LandPride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflectthe product in the future. The illustrations in this manual are not intended for safe and proper assembly or disassembly of equipment. The illustrations are intended forordering parts only.

Land Pride is registered trademark.

All other brands and product names are trademarks or registered trademarks of their respective holders.

Printed in the United States of America.

2 PD10, PD15, PD25, PD35, HD25 & HD35 Post Hole Digger 317-048P 05/13/20


Table of Contents

Hydraulic Cylinder (810-005C) Energy.......................158Rock Auger.................................................................160Storage Stand (317-142A) New 1/1/2020..................162Storage Stand (317-142A) Prior 1/1/2020..................164Storage Stand (317-166A) New 1/1/2020..................166Storage Stand (317-166A) Prior 1/1/2020..................168

Part Number Index................................................170


Table of Contents (continued)

05/13/20 PD10, PD15, PD25, PD35, HD25 & HD35 Post Hole Digger 317-048P 3

HYDRAULIC DRIVE

112" Bolt-On Rock Head (317-276A)..................................5415" Bolt-On Rock Head (317-277A)..................................5618" Bolt-On Rock Head (317-278A)..................................58

224" Bolt-On Rock Head (317-279A)..................................60

33-Point Assembly................................................................83-Point Mount Decal Placement........................................383-Point Mount Decal Placement........................................46

66" Bolt-On Rock Head (317-274A)....................................62

99" Bolt-On Rock Head (317-275A)....................................64

AAuger.................................................................................66

BBucket Mount Assembly....................................................10Bucket Mount Decal Placement........................................40Bucket Mount Decal Placement........................................48

DDown Pressure Update Kit 317-190A...............................68Down Pressure W/ Up Relief PD25/35 & HD25/35...........70Down Pressure W/O Up Relief HD25 & HD35 3-Point......72

GGearbox (826-304C) OMNI...............................................22Gearbox (826-467C) Comer.............................................24Gearbox Rest Components...............................................12

HHydraulic Cylinder (810-005C) Energy.............................74Hydraulic Motor (810-414C) & (810-415C) Ross..............26Hydraulic Motor (810-528C) White....................................28Hydraulic Motor (810-529C) White....................................30Hydraulic Motor (850-250C) White....................................32Hydraulic Motor (850-251C) White....................................34Hydraulic Motor (850-252C) White....................................36

PPivot Clevis W/Pin.............................................................14

QQA Mount Without Hosses................................................76Quick Hitch Mount.............................................................16Quick Hitch Mount Decal Placement.................................42Quick Hitch Mount Decal Placement.................................50

RRock Auger........................................................................78

SSkid Steer Mount (HD25/35).............................................18

TTouch-up Paints - LP.........................................................44Touch-up Paints - LP.........................................................52Tractor Loader Mount (HD25/35)......................................20

PTO DRIVE

112" Bolt-On Rock Head (317-276A)................................12615" Bolt-On Rock Head (317-277A)................................12818" Bolt-On Rock Head (317-278A)................................130



AAlignment Handle............................................................136Alignment Handle............................................................138Auger...............................................................................140Auger...............................................................................142

DDecal Placement.............................................................122Down Pressure Update Kit 317-190A.............................144Down Pressure W/ Up Relief PD10.................................146Down Pressure W/ Up Relief PD15.................................148Down Pressure W/ Up Relief PD25/35 & HD25/35.........150Down Pressure W/O Up Relief........................................152Down Pressure W/O Up Relief........................................154Down Pressure W/O Up Relief........................................156Driveline (826-163C) Eurocardan Shear Bolt....................88Driveline (826-164C) Eurocardan Shear Bolt....................90Driveline (826-173C) Eurocardan Clutch..........................92Driveline (826-407C) Eurocardan Shear Bolt....................94Driveline (826-879C) Comer.............................................96Driveline (826-887C) Comer.............................................98Driveline (826-890C) Comer...........................................100

FFrame PD10......................................................................80Frame PD15......................................................................82Frame PD25 & PD35.........................................................84

GGearbox (826-165C) ITG................................................102Gearbox (826-166C) ITG................................................104Gearbox (826-167C) ITG................................................106


Alphabetized Table of Contents


Gearbox (826-211C) OMNI........................................108Gearbox (826-212C) OMNI........................................110Gearbox (826-312C) Comer (New)............................112Gearbox (826-312C) Comer (Old)..............................114Gearbox (826-312C) OMNI........................................116Gearbox (826-337C) Comer.......................................118Gearbox (826-446C) Comer.......................................120

HHydraulic Cylinder (810-005C) Energy.......................158

RRock Auger.................................................................160

SStorage Stand (317-142A) New 1/1/2020..................162Storage Stand (317-142A) Prior 1/1/2020..................164Storage Stand (317-166A) New 1/1/2020..................166Storage Stand (317-166A) Prior 1/1/2020..................168

TTouch-up Paints - LP..................................................124


Alphabetized Table of Contents (continued)


72772


Table of Contents Part Number IndexLand Pride Section 2: FramesHYDRAULIC DRIVE

3-Point Assembly

Applies to HD25, HD35

RevisionCommentsPart DescriptionPart No.Ref.

Drawing Image NumberDwg 18990PD25/35 SERIES BOOM WELDMENT317-015H1.PD25/35 SERIES BOOM WMT ORANGE317-015H821.PIN 3/4 X 5 23/32 USEABLE805-231C2.PIN COTTER 3/16 X 1 3/4 PLT805-017C3.RD TB 1 1/2 OD X .781 ID X 5/8317-054D4.25/35 SERIES YOKE WELDMENT317-013H5.25/35 SERIES YOKE WMT ORANGE317-013H825.NUT HEX NYLOCK 5/16-18 PLT803-084C6.PIN HITCH CATEGORY I-II805-227C7.HHCS 3/8-16X1 1/4 GR5802-079C8.HD SPRING CLAMP STRAP317-061D9.HD SPRING CLAMP317-081H10.NUT LOCK 3/8-16 PLT803-013C11.SPRING EXT 1.5ODX8 1/4X.192W807-191C12.HHCS 5/16-18X2 GR5802-115C13.HH1/2R2 066 3/4FJIC811-773C14.AD 3/4MORB 3/4MJIC811-088C15.HHCS 1/2-13X1 3/4 GR5802-082C16.WASHER LOCK SPRING 1/2 PLT804-015C17.HD SPRING TAB317-060D18.

HD25 S/N 1012443+HYD MTR 8CU IN 6B SPL850-250C19.HD25 (S/N 477398 to S/N 1012442) Obsolete

RPBY 850-250C810-528C19.

ObsoleteHYD MTR 8CU IN 6B SPL ORANGE810-528C8219.Service OnlyHYD MTR 8 CU IN DSP W/14T SPL810-547C19.HD25 (S/N 477397-)RPBY 317-140S ( 8 CU IN)810-414C19.HD35 S/N 1100875+HYD MTR 18CU IN 6B SPL850-251C19.HD35 (S/N 458243 to S/N 458247S/N 458250 to S/N 1100874)

RPBY 850-251C810-529C19.

HYD MTR 18CU IN 6BSPL ORANGE810-529C8219.Service Only HD35 S/N 1112383+HYD MTR 18 CU IN DSP W/14T SPL850-252C19.Service Only HD35 S/N 1112382-(Obsolete)

RPBY 850-252C810-531C19.

HD35 (S/N 458242- 458248 to458249)

RPBY 810-531C (18 CU IN)810-415C19.

EL 7/8MORB 3/4MJIC811-081C20.Comer HD25 (S/N 477398+) HD35(S/N 458243 to 458247 458250+)

GB 3.18:1 HYD 1 SAE 6B SPL826-467C21.

GB 3.18:1HYD 1SAE 6BSPL ORANGE826-467C8221.OMNI HD25 (S/N 477397-) HD35(S/N 458242- 458248 to 458249)

RPBY 317-140S (HD25) OR 317-141S (HD35)826-304C21.

GEAR BOX AUGER GUARD317-016D22.WASHER FLAT 3/8 SAE PLT804-012C23.WASHER LOCK SPRING 3/8 PLT804-013C24.HHCS 3/8-16X3/4 GR5802-014C25.

Includes items #16 through 26HD25 POST HOLE DIGGER ASSY317-071A26.Includes items #1 through 15HD 3-POINT MOUNT ASSEMBLY317-078A27.Replacement Welding RequiredBALL BUSHING 1 BORE890-008C28.OMNI HD25 (S/N 477397-) HD35(S/N 458242- 458248 to 458249)

COUPLER, 14 TOOTH TO 13 TOOTH317-092H29.

S/N 1403289+NUT HEX WHIZ 5/16-18 PLT803-043C30.S/N 1403289+PD15/25 SMV BRKT317-415D31.S/N 1403289+SMV MOUNTING SOCKET890-401C32.S/N 1403289+RHSSNB 5/16-18X3/4 GR5842-491C33.S/N 1403289+PD15/25 SMV MNT317-394S34.

PIN CLVS HDLS .88X6.41 USBL805-427C35.PIN COTTER 3/16 X 1 1/2 PLT805-104C36.


Table of Contents Part Number IndexSection 2: Frames Land PrideHYDRAULIC DRIVE

3-Point Assembly


73215



Bucket Mount Assembly



Drawing Image NumberDwg 73215NUT HEX FLANGE 1/2-13 GR G PLT803-193C1.HD BACKER PLATE317-064D2.HD BUCKET MOUNT WELDMENT317-079H3.HHCS 1/2-13X1 3/4 GR5802-082C4.PIN COTTER 3/16 X 1 1/2 PLT805-104C5.PIN CLEVIS 1 X 4 11/16 USABLE805-131C6.SPRING EXT 1.5ODX8 1/4X.192W807-191C7.HD BUCKET MOUNT CLEVIS WELD.317-080H8.

Includes items #1 through 8, 21, 22,& 26

HD BUCKET MOUNT ASSY/w HOSES317-082A9.

HD25 S/N 1012443+HYD MTR 8CU IN 6B SPL850-250C10.HD25 (S/N 477398 to S/N 1012442) Obsolete

RPBY 850-250C810-528C10.

ObsoleteHYD MTR 8CU IN 6B SPL ORANGE810-528C8210.Service OnlyHYD MTR 8 CU IN DSP W/14T SPL810-547C10.HD25 (S/N 477397-)RPBY 317-140S ( 8 CU IN)810-414C10.HD35 S/N 1100875+HYD MTR 18CU IN 6B SPL850-251C10.HD35 (S/N 458243 to S/N 458247S/N 458250 to S/N 1100874 )

RPBY 850-251C810-529C10.

HYD MTR 18CU IN 6BSPL ORANGE810-529C8210.Service Only HD35 S/N 1112383+HYD MTR 18 CU IN DSP W/14T SPL850-252C10.Service Only HD35 S/N 1112382-(Obsolete)

RPBY 850-252C810-531C10.

HD35 (S/N 458242- 458248 to458249)

RPBY 810-531C (18 CU IN)810-415C10.

HD SPRING TAB317-060D11.WASHER LOCK SPRING 1/2 PLT804-015C12.HHCS 1/2-13X1 3/4 GR5802-082C13.EL 7/8MORB 3/4MJIC811-081C14.

Comer HD25 (S/N 477398+) HD35(S/N 458243 to 458247 458250+)

GB 3.18:1 HYD 1 SAE 6B SPL826-467C15.

GB 3.18:1HYD 1SAE 6BSPL ORANGE826-467C8215.OMNI HD25 (S/N 477397-) HD35(S/N 458242- 458248 to 458249)

RPBY 317-140S (HD25) OR 317-141S (HD35)826-304C15.

GEAR BOX AUGER GUARD317-016D16.WASHER FLAT 3/8 SAE PLT804-012C17.WASHER LOCK SPRING 3/8 PLT804-013C18.HHCS 3/8-16X3/4 GR5802-014C19.

Includes items #10 through 20HD25 POST HOLE DIGGER ASSY317-071A20.HH1/2R2 292 3/4FJIC811-327C21.AD 3/4MORB 3/4MJIC811-088C22.

OMNI HD25 (S/N 477397-) HD35(S/N 458242- 458248 to 458249)

COUPLER, 14 TOOTH TO 13 TOOTH317-092H23.

PIN CLVS HDLS .88X6.41 USBL805-427C24.PIN COTTER 3/16 X 1 1/2 PLT805-104C25.

S/N ________+DECAL, DIG SAFE DANGER844-194C26.



Bucket Mount Assembly


37004



Gearbox Rest Components



Drawing Image NumberDwg 37004ASY, GBOX REST317-204A*WMT, GBOX REST317-207H1.HHCS 3/8-16X4 1/4 GR5802-750C2.

Using 2 longer bolts (802-750Cinstead of 4 short bolts (802-155C)

RPBY 802-750C802-155C2.

NUT FLANGE LOCK 3/8-16 PLT803-209C3.



Gearbox Rest Components


37003



Pivot Clevis W/Pin



Drawing Image Numberdwg37003HD BUCKET MOUNT CLEVIS WELD.317-080H1.ASY, CLEVIS WMT W/ PIN317-196A2.PIN COTTER 3/16 X 1 1/2 PLT805-104C3.PIN CLVS 1.0X4.69 USBL805-131C4.



Pivot Clevis W/Pin


37002



Quick Hitch Mount



Drawing Image NumberDwg 37002ASSY, HD25/35 QA MOUNT317-203A1.

S/N_______+WMT, QA FRAME HD25/35317-408H2.S/N _______-WMT, QA FRAME HD25/35317-201H2.

DECAL WARNING READ MANUAL838-293C3.S/N_______+DECAL, DIG SAFE DANGER844-194C4.S/N _______- (Obsolete)RPBY 844-194C838-292C4.

DECAL LANDPRIDE 10" BROWN/GOLD848-159C5.



Quick Hitch Mount


35954



Skid Steer Mount (HD25/35)



Drawing Image NumberDwg 35954GEAR BOX AUGER GUARD317-016D1.HD SPRING TAB317-060D2.CABLE TIE .19X14.25 3DIA 50LB800-060C3.HHCS 3/8-16X3/4 GR5802-014C4.HHCS 1/2-13X1 3/4 GR5802-082C5.WASHER FLAT 3/8 SAE PLT804-012C6.WASHER LOCK SPRING 3/8 PLT804-013C7.WASHER LOCK SPRING 1/2 PLT804-015C8.PIN COTTER 3/16 X 1 1/2 PLT805-104C9.PIN CLVS HDLS .88X6.41 USBL805-427C10.SPRING EXT 1.5ODX8 1/4X.192W807-191C11.EL 3/4MJIC 1 1/16MORB811-091C12.AD 3/4MJIC 1 1/16MORB811-205C13.EL 45 7/8MORB 3/4MJIC811-778C14.HH1/2R2 099 3/4FJIC E-Z FLEX811-779C15.HH1/2R2 099 3/4FJIC E-Z FLEX811-779C16.GB 3.18:1 HYD 1 SAE 6B SPL826-467C17.

HD25 S/N 1012443+HYD MTR 8CU IN 6B SPL850-250C18.HD25 S/N 1012442- (Obsolete)RPBY 850-250C810-528C18.HD35 S/N 1100875+HYD MTR 18CU IN 6B SPL850-251C18.HD35 S/N 1100874-RPBY 850-251C810-529C18.S/N _______+CUP 1 1/16FORB MALE QUICK CPLR811-947C19.S/N _______-RPBY 851-947C811-744C19.S/N _______+CUP 1 1/16FORB FML QUICK CPLR811-948C20.S/N _______-RPBY 851-948C811-745C20.



Skid Steer Mount (HD25/35)


35955



Tractor Loader Mount (HD25/35)



Drawing Image NumberDwg 35955GEAR BOX AUGER GUARD317-016D1.HD SPRING TAB317-060D2.CABLE TIE .19X14.25 3DIA 50LB800-060C3.HHCS 3/8-16X3/4 GR5802-014C4.HHCS 1/2-13X1 3/4 GR5802-082C5.WASHER FLAT 3/8 SAE PLT804-012C6.WASHER LOCK SPRING 3/8 PLT804-013C7.WASHER LOCK SPRING 1/2 PLT804-015C8.PIN COTTER 3/16 X 1 1/2 PLT805-104C9.PIN CLVS HDLS .88X6.41 USBL805-427C10.SPRING EXT 1.5ODX8 1/4X.192W807-191C11.AD 3/4MORB 3/4MJIC811-088C12.HH1/2R2 292 3/4FJIC811-327C13.HH1/2R2 292 3/4FJIC811-327C14.EL 45 7/8MORB 3/4MJIC811-778C15.GB 3.18:1 HYD 1 SAE 6B SPL826-467C16.

HD25 S/N 1012443+HYD MTR 8CU IN 6B SPL850-250C17.HD25 S/N 1012442- (Obsolete)RPBY 850-250C810-528C17.HD35 S/N 1100875+HYD MTR 18CU IN 6B SPL850-251C17.HD35 S/N 1100874-HYD MTR 18CU IN 6B SPL810-529C17.



Tractor Loader Mount (HD25/35)


18989


Table of Contents Part Number IndexLand Pride Section 3: GearboxesHYDRAULIC DRIVE

Gearbox (826-304C) OMNI



Drawing Image NumberDwg 18989GBOX 2.69:1 HYDRAUL. 11T INPUT826-304C*OMNI PLUG VENT 1/2-14 NPTF1400331.OMNI SCREW,HEX 3/8-16UNC GR51100012.OMNI LOCKWASHER 3/8"1300003.OMNI TOP CAP0200014.OMNI COTTER PIN1000005.OMNI MOUNTING SHAFT0400016.OMNI INPUTGASKET, 0.10MM0701507.OMNI INPUTGASKET, 0.15MM0701498.OMNI INPUTGASKET, 0.50MM0700009.OMNI BEARING CUP, (LM-104911)05000410.OMNI BEARING CONE, (LM-104949)05000511.OMNI GEAR, 35T03000112.OMNI OUTPUT SHAFT04000013.OMNI KEY, WOODRUFF08000014.OMNI OUTPUT SEAL, 3-LIP06000115.OMNI HOUSING01005816.OMNI PLUG, SOCKET HD. 1/2 PIPE14000417.OMNI TOPGASKET, 0.50MM07013018.OMNI TOPGASKET, 0.15MM07012919.OMNI TOPGASKET, 0.10MM07012820.OMNI CAP, INPUT02025721.OMNI BEARING CUP, (LM-11910)05000222.OMNI BEARING CONE, (LM-11949)05000323.OMNI SCREW,HEX 3/8-16UNC X 1L11000024.OMNI INPUT PINION, 13T03049825.OMNI BEARING CONE, (LM-67048)05000126.OMNI BEARING CUP, (LM-67010)05000027.RPBY 8.7.1.0253006000028.


Table of Contents Part Number IndexSection 3: Gearboxes Land PrideHYDRAULIC DRIVE



22378


Table of Contents Part Number IndexLand Pride Section 3: GearboxesHYDRAULIC DRIVE

Gearbox (826-467C) Comer



Drawing Image NumberDwg 22378GB 3.18:1 HYD 1 SAE 6B SPL826-467C*RPBY 0.196.0303.000.196.0300.001.CO CASTING0.196.0303.001.CO SHIM KIT (51.1X63)0.196.7500.002.

ObsoleteN/A0.196.7300.003.CO CROWN GEAR Z35 M5.080.196.6000.004.CO ROLLER BRG LM67048-LM670108.0.9.025315.CO DUST LIP 50.8X66.62X7.928.7.1.025296.PINION Z11 M5.080.196.5002.007.CO BOLT M10X40 HHD (8.8)N/A8.

ObsoleteRPBY 802-609C8.1.1.000739.N/ARPBY 0.196.1304.000.196.1300.0010.

CO TOP PLATE0.196.1304.0010.CO OUTPUT SHAFT0.196.3001.0011.CO PLUG 1/2" GAS8.6.5.0020312.CO ROLLR BRG LM104949-LM1049118.0.9.0253213.CO DUST LIP 31.75X44.5X7.928.7.1.0253014.CO COVER0.196.1301.0015.CO WOODRUFF KEY 7.94mmx16.28mm0.196.7000.0016.CO ROLLER BRG LM11910-LM119498.0.9.0253317.

ObsoleteCO GASKET KIT (190mm X224.5mm)0.196.7200.0018.CO EXTENSIONN/A19.CO BUSHING GROOVEDN/A20.PIN ROLL M6 X 45MM805-595C21.PIN ROLL M10 X 45MM805-596C22.CO OIL PLUG 3/8te8.6.5.0000623.COMER EXT W/BUSH KIT 826-467CA.196.50224.


Table of Contents Part Number IndexSection 3: Gearboxes Land PrideHYDRAULIC DRIVE

Gearbox (826-467C) Comer


19033


Table of Contents Part Number IndexLand Pride Section 4: Hydraulic MotorsHYDRAULIC DRIVE

Hydraulic Motor (810-414C) & (810-415C) Ross



Drawing Image Numberdwg19033HD25HYD MTR 8 CU IN DSP PD SERIES810-414CHD35HYD MTR 18 CU IN DSP PD SERIES810-415C(810-414C) HD25ROSS BOLT0212711.(810-415C) HD35ROSS BOLT0213401.

ROSS END COVERME0160002.Found in seal kit item #21ROSS SEAL RING3.

ROSS COMMUTATOR ASSEMBLYME018000A14.Found in seal kit item #21ROSS COMMUTATOR SEAL5.

ROSS MANIFOLDME0150006.ROSS WEAR PLATE4773427.

(810-414C) HD25ROSS ROTOR SETMB0870038.(810-415C) HD35ROSS ROTOR SETMB1870038.(810-414C) HD25ROSS DRIVE LINKMB0830009.(810-415C) HD35ROSS DRIVE LINKMB1830009.

ROSS THRUST BEARING06802410.ROSS COUPLING SHAFTMB01900511.ROSS INNER BEARING07101912.ROSS THRUST WASHER40013613.ROSS THRUST BEARING06901714.

Found in seal kit item #21ROSS INNER SEAL15.Found in seal kit item #21ROSS BACKUP WASHER16.Found in seal kit item #21ROSS BACKUP WASHER17.

ROSS SERVICE HOUSING ASS'YME012006A118.ROSS OUTER BEARING06802719.

Found in seal kit item #21ROSS DIRT & WATER SEAL20.SEAL KIT ROSS ME & MB SK000092810-431C21.


Table of Contents Part Number IndexSection 4: Hydraulic Motors Land PrideHYDRAULIC DRIVE

Hydraulic Motor (810-414C) & (810-415C) Ross


24606



Hydraulic Motor (810-528C) White

Applies to HD25


Drawing Image NumberDwg 24606ObsoleteRPBY 850-250C810-528C

*In Seal Kit Item #27DUST SEALN/A1.In Seal Kit Item #27RETAINING RINGN/A2.In Seal Kit Item #27METAL BACK UP SHIMN/A3.In Seal Kit Item #27HOUSING SEALN/A4.In Seal Kit Item #27METAL BACK UP SHIMN/A5.In Seal Kit Item #27BACKUP SEALN/A6.In Seal Kit Item #27HIGH PRESSURE SHAFT SEALN/A7.In Seal Kit Item #27REAR HOUSING SEALN/A8.In Seal Kit Item #27BODY SEAL 2 EA)N/A9.In Seal Kit Item #27ENDCOVER SEALN/A10.In Seal Kit Item #27SEAL CARRIERN/A11.In Seal Kit Item #27THRUST WASHERN/A12.

WH FRONT THRUST BEARING50001825213.WH FRONT HOUSING BEARING50001800314.WH "A31" HOUSING50013182315.WH REAR HOUSING BEARING50001800216.WH REAR THRUST BEARING50001805917.WH DRIVE LINK50001400918.WH FORWARD MANIFOLD50001500619.WH ROTOR SET50008700520.WH BALANCE PLATE50001200121.WH STEEL BALLS (3)50001804822.WH ENDCOVER50001600123.WH BOLTS (7)50044500624.WH SHAFT50001160025.WH SEAL KIT50044400126.




Applies to HD25

24607




Applies to HD35


Drawing Image Numberdwg24607HYD MTR 18 CU IN DSP W/6B SPL810-529C*DUST SEALN/A1.RETAINING RINGN/A2.METAL BACK UP SHIMN/A3.HOUSING SEALN/A4.METAL BACK UP SHIMN/A5.BACKUP SEALN/A6.HIGH PRESSURE SHAFT SEALN/A7.REAR HOUSING SEALN/A8.BODY SEAL (2 EA)N/A9.ENDCOVER SEALN/A10.SEAL CARRIERN/A11.THRUST WASHERN/A12.WH FRONT THRUST BEARING50001825213.WH FRONT HOUSING BEARING50001800314.WH "A31" HOUSING50013182315.WH REAR HOUSING BEARING50001800216.WH REAR THRUST BEARING50001805917.WH DRIVE LINK50001400718.WH FORWARD MANIFOLD50001500619.WH ROTOR SET50024700520.WH BALANCE PLATE50001200121.WH STEEL BALLS (3)50001804822.WH ENDCOVER50001600123.WH BOLTS (7)50044501824.WH SHAFT50001160025.WH SEAL KIT50044400126.




Applies to HD35

39917




Applies to HD25


Image No.Dwg 39917HYD MTR 8CU IN 6B SPL850-250C*WH SEAL CARRIER BOLT (9)1570181101.WH SHAFT5000116002.WH BALANCE PLATE5000120013.WH DRIVE LINK5000140094.WH FORWARD MANIFOLD5000150065.WH ENDCOVER5000160016.WH REAR HOUSING BRG5000180027.WH FRONT HOUSING BRG5000180038.WH STEEL BALLS (3)5000180489.WH REAR THRUST BRG50001805910.WH BEARING SPACER50001830511.WH ROTOR SET50008700512.WHITE SEAL KIT50044450613.WH BOLTS (7)50044500614.WHITE HOUSING50501361415.WH SEAL CARRIER50501700116.WH SEAL CARRIER BOLT WASHER(9)53001810017.WHITE THRUST WASHER53001810218.

Available only in Seal Kit Item #13WH DUST SEALN/A19.Available only in Seal Kit Item #13BACKUP SHIMN/A20.Available only in Seal Kit Item #13BACKUP SEALN/A21.Available only in Seal Kit Item #13SHAFT SEALN/A22.Available only in Seal Kit Item #13SEAL CARRIER SEALN/A23.Available only in Seal Kit Item #13HOUSING SEALN/A24.Available only in Seal Kit Item #13BODY SEALN/A25.Available only in Seal Kit Item #13ENDCOVER SEALN/A26.




Applies to HD25

39918




Applies to HD35


Image No.Dwg 39918HYD MTR 18CU IN 6B SPL850-251C*WH SEAL CARRIER BOLT (9)1570181101.WH SHAFT5000116002.WH BALANCE PLATE5000120013.WH DRIVE LINK5000140074.WH FORWARD MANIFOLD5000150065.WH ENDCOVER5000160016.WH REAR HOUSING BRG5000180027.WH FRONT HOUSING BRG5000180038.WH STEEL BALLS (3)5000180489.WH REAR THRUST BRG50001805910.WH BEARING SPACER50001830511.WH ROTOR KIT50024700512.WHITE SEAL KIT50044450613.WH BOLTS (7)50044501814.WHITE HOUSING50501361415.WH SEAL CARRIER50501700116.WH SEAL CARRIER BOLT WASHER(9)53001810017.WHITE THRUST WASHER53001810218.





Applies to HD35

39919




Applies to HD35


Image No.Dwg 39919HYD MTR 18 CU IN DSP W/14T SPL850-252C*WH SEAL CARRIER BOLT (9)1570181101.WH SHAFT5000111012.WH BALANCE PLATE5000120013.WH DRIVE LINK5000140074.WH FORWARD MANIFOLD5000150065.WH ENDCOVER5000160016.WH REAR HOUSING BRG5000180027.WH FRONT HOUSING BRG5000180038.WH STEEL BALLS (3)5000180489.WH REAR THRUST BRG50001805910.WH BEARING SPACER50001830511.WH ROTOR SET50024700512.WHITE SEAL KIT50044450613.WH BOLTS (7)50044501814.WH WIRE RING50044920115.WHITE HOUSING50501361416.WH SEAL CARRIER50501700117.WH SEAL CARRIER BOLT WASHER(9)53001810018.WHITE THRUST WASHER53001810219.





Applies to HD35

73197


Table of Contents Part Number IndexLand Pride Section 6: DecalsHYDRAULIC DRIVE

3-Point Mount Decal Placement

Applies to HD25


Image No.Dwg 73197DECAL, DANGER GUARD MISSING1355101.DECAL FLAG818-190C2.DECAL DANGER PD INJURY W/SPAN818-547C3.DECAL DANGER PD READ MANUAL818-646C4.DECAL WARNING 300 RPM818-691C5.DECAL DANGER HPD ROTATING PART838-276C6.DECAL LANDPRIDE 6" BROWN/GOLD838-967C7.

S/N ________+DECAL, DIG SAFE DANGER844-194C8.DECAL HD25-GOLD848-157C9.

ObsoleteRPBY 848-157C838-296C9.DECAL HD35-GOLD848-158C9.

ObsoleteRPBY 848-158C838-297C9.Orange UnitDECAL LANDPRIDE 10" BROWN/GOLD848-159C10.Beige UnitRPBY 848-159C818-897C10.S/N ________+DECAL HIGH PRESSURE FLUIDS848-747C11.

DECAL PIC--PINCH POINT858-765C12.


Table of Contents Part Number IndexSection 6: Decals Land PrideHYDRAULIC DRIVE


Applies to HD25

73199



Bucket Mount Decal Placement

Applies to HD25


Image No.Dwg 73199DECAL, DANGER GUARD MISSING1355101.DECAL FLAG818-190C2.DECAL DANGER HPD ROTATING PART838-276C3.DECAL LANDPRIDE 6" BROWN/GOLD838-967C4.



ObsoleteRPBY 848-158C838-297C6.S/N ________+DECAL HIGH PRESSURE FLUIDS848-747C7.




Applies to HD25

73210



Quick Hitch Mount Decal Placement

Applies to HD25


Image No.Dwg 73210DECAL, DANGER GUARD MISSING1355101.DECAL FLAG818-190C2.DECAL DANGER HPD ROTATING PART838-276C3.DECAL WARNING READ MANUAL838-293C4.DECAL LANDPRIDE 6" BROWN/GOLD838-967C5.



ObsoleteRPBY 848-158C838-297C7.Black UnitDECAL LANDPRIDE 10" BROWN/GOLD848-159C8.Beige UnitRPBY 848-159C818-897C8.S/N ________+DECAL HIGH PRESSURE FLUIDS848-747C9.




Applies to HD25

No diagram associated with this Parts List



Touch-up Paints - LP

Applies to HD25


Spray canLP BEIGE SPRAY CAN821-011C1.Touch-up bottle with brushLP BEIGE TOUCH-UP 5OZ821-011CTU1.Quart canLP BEIGE QUART821-011CQT1.Gallon canLP BEIGE GALLON821-011CGL1.Spray canGLOSS BLACK SPRAY CAN821-070C2.Touch-up bottle with brushGLOSS BLACK TOUCH-UP 5OZ821-070CTU2.Quart canGLOSS BLACK QUART821-070CQT2.Gallon canGLOSS BLACK GALLON821-070CGL2.Spray canMED. RED SPRAY TRCK/CTR821-054C3.Touch-up bottle with brushMED RED TOUCH-UP 5OZ821-054CTU3.Quart canMED RED QUART821-054CQT3.Gallon canMED RED GALLON821-054CGL3.Spray canGREEN SPRAY CUTTERS821-058C4.Touch-up bottle with brushGREEN TOUCH-UP 5OZ821-058CTU4.Quart canGREEN QUART821-058CQT4.Gallon canGREEN GALLON821-058CGL4.Spray canORANGE SPRAY CAN821-066C5.Touch-up bottle with brushORANGE TOUCH-UP 5OZ821-066CTU5.Quart canORANGE QUART821-066CQT5.Gallon canORANGE GALLON821-066CGL5.Spray canBLUE SPRAY CAN821-067C6.Touch-up bottle with brushBLUE TOUCH-UP 5OZ821-067CTU6.Quart canBLUE QUART821-067CQT6.Gallon canBLUE GALLON821-067CGL6.Spray canPAINT ALUMINUM/ZINC SPRAY CAN821-080C7.Touch-up bottle with brushPAINT ALUMINUM/ZINC TOUCH UP821-080CTU7.Quart canPAINT ALUMINUM/ZINC QUART821-080CQT7.Gallon canPAINT ALUMINUM/ZINC GALLON821-080CGL7.




Applies to HD25

73197


Table of Contents Part Number IndexLand Pride Section 6: Decals & Touch-up PaintHYDRAULIC DRIVE


Applies to HD35


Image No.Dwg 73197DECAL, DANGER GUARD MISSING1355101.DECAL FLAG818-190C2.DECAL DANGER PD INJURY W/SPAN818-547C3.DECAL DANGER PD READ MANUAL818-646C4.DECAL WARNING 300 RPM818-691C5.DECAL DANGER HPD ROTATING PART838-276C6.DECAL LANDPRIDE 6" BROWN/GOLD838-967C7.



ObsoleteRPBY 848-158C838-297C9.Orange UnitDECAL LANDPRIDE 10" BROWN/GOLD848-159C10.Beige UnitRPBY 848-159C818-897C10.S/N ________+DECAL HIGH PRESSURE FLUIDS848-747C11.

DECAL PIC--PINCH POINT858-765C12.


Table of Contents Part Number IndexSection 6: Decals & Touch-up Paint Land PrideHYDRAULIC DRIVE


Applies to HD35

73199




Applies to HD35


Image No.Dwg 73199DECAL, DANGER GUARD MISSING1355101.DECAL FLAG818-190C2.DECAL DANGER HPD ROTATING PART838-276C3.DECAL LANDPRIDE 6" BROWN/GOLD838-967C4.



ObsoleteRPBY 848-158C838-297C6.S/N ________+DECAL HIGH PRESSURE FLUIDS848-747C7.




Applies to HD35

73210




Applies to HD35


Image No.Dwg 73210DECAL, DANGER GUARD MISSING1355101.DECAL FLAG818-190C2.DECAL DANGER HPD ROTATING PART838-276C3.DECAL WARNING READ MANUAL838-293C4.DECAL LANDPRIDE 6" BROWN/GOLD838-967C5.



ObsoleteRPBY 848-158C838-297C7.Black UnitDECAL LANDPRIDE 10" BROWN/GOLD848-159C8.Beige UnitRPBY 848-159C818-897C8.S/N ________+DECAL HIGH PRESSURE FLUIDS848-747C9.




Applies to HD35

No diagram associated with this Parts List




Applies to HD35


Spray canLP BEIGE SPRAY CAN821-011C1.Touch-up bottle with brushLP BEIGE TOUCH-UP 5OZ821-011CTU1.Quart canLP BEIGE QUART821-011CQT1.Gallon canLP BEIGE GALLON821-011CGL1.Spray canGLOSS BLACK SPRAY CAN821-070C2.Touch-up bottle with brushGLOSS BLACK TOUCH-UP 5OZ821-070CTU2.Quart canGLOSS BLACK QUART821-070CQT2.Gallon canGLOSS BLACK GALLON821-070CGL2.Spray canMED. RED SPRAY TRCK/CTR821-054C3.Touch-up bottle with brushMED RED TOUCH-UP 5OZ821-054CTU3.Quart canMED RED QUART821-054CQT3.Gallon canMED RED GALLON821-054CGL3.Spray canGREEN SPRAY CUTTERS821-058C4.Touch-up bottle with brushGREEN TOUCH-UP 5OZ821-058CTU4.Quart canGREEN QUART821-058CQT4.Gallon canGREEN GALLON821-058CGL4.Spray canORANGE SPRAY CAN821-066C5.Touch-up bottle with brushORANGE TOUCH-UP 5OZ821-066CTU5.Quart canORANGE QUART821-066CQT5.Gallon canORANGE GALLON821-066CGL5.Spray canBLUE SPRAY CAN821-067C6.Touch-up bottle with brushBLUE TOUCH-UP 5OZ821-067CTU6.Quart canBLUE QUART821-067CQT6.Gallon canBLUE GALLON821-067CGL6.Spray canPAINT ALUMINUM/ZINC SPRAY CAN821-080C7.Touch-up bottle with brushPAINT ALUMINUM/ZINC TOUCH UP821-080CTU7.Quart canPAINT ALUMINUM/ZINC QUART821-080CQT7.Gallon canPAINT ALUMINUM/ZINC GALLON821-080CGL7.




Applies to HD35

70133


Table of Contents Part Number IndexLand Pride Section 7: Options & AccessoriesHYDRAULIC DRIVE

12" Bolt-On Rock Head (317-276A)



Photo Shop Image Number70133SA 12 BOLT-ON ROCK HEAD ASSY317-276A*HHCS 1/2-13X4 GR5802-044C1.HHCS 1/2-13X1 3/4 GR5802-082C2.NUT LOCK 1/2-13 PLT803-019C3.PENGO CAST BORH, 12"-AR/RR820-699C4.PENGO WEAR CAP, 12" ARR-1820-705C5.PENGO WEAR CAP, 12" ARR-2820-706C6.PENGO ROCK AUGER TOOTH820-713C7.


Table of Contents Part Number IndexSection 7: Options & Accessories Land PrideHYDRAULIC DRIVE



70134





70135





70136





70131






Photo Shop Image Number70131SA 6 BOLT-ON ROCK HEAD ASSY317-274A*HHCS 1/2-13X3 1/2 GR5802-041C1.HHCS 1/2-13X1 3/4 GR5802-082C2.NUT LOCK 1/2-13 PLT803-019C3.PENGO CAST BORH, 6"-AR/RR820-697C4.PENGO WEAR CAP, 6" ARR820-703C5.PENGO ROCK AUGER TOOTH820-713C6.





70132






Photo Shop Image Number70132SA 9 BOLT-ON ROCK HEAD ASSY317-275A*HHCS 1/2-13X3 1/2 GR5802-041C1.HHCS 1/2-13X1 3/4 GR5802-082C2.NUT LOCK 1/2-13 PLT803-019C3.PENGO CAST BORH, 9"-AR/RR820-698C4.PENGO WEAR CAP, 9" ARR820-704C5.PENGO ROCK AUGER TOOTH820-713C6.





10487



Auger



Drawing Image Numberdwg10487Rev. 2NUT HEX NYLOCK 1/2-13803-147C1.Rev 1; Use up stockNUT LOCK 1/2-13 PLT803-019C1.

HHCS 1/2-13X3 3/4 GR5802-042C2.PD 14 AUGER EXTENSION ASSY317-041A3.PD 7 AUGER EXTENSION ASSEMBLY317-040A4.

2 Teeth (Mc Milliun) 2 Teeth (Pengo)PD 6" SEMI-DOUBLE AUGER ASSY317-030A5.3 Teeth (Mc Milliun) 4 Teeth (Pengo)PD 9" SEMI-DOUBLE AUGER ASSY317-033A5.4 Teeth (Mc Milliun) 4 Teeth (Pengo)PD 12" SEMI-DOUBLE AUGER ASSY317-036A5.5 Teeth (Mc Milliun)PD 14" DOUBLE AUGER ASSY317-037A5.5 Teeth (Pengo)PD 15" DOUBLE AUGER ASSY317-070A5.6 Teeth (Mc Milliun) 6 Teeth (Pengo)PD 18" DOUBLE AUGER ASSY317-038A5.9 Teeth (Mc Milliun) 10 Teeth(Pengo)

PD 24" TREE DOUBLE AUGER ASSY317-039A5.

AUGER CUTTING TOOTH820-172C6.AUGER FISHTAIL TIP820-171C7.RHSNB 5/8-11X1 3/4 GR5 PLT802-584C8.HHCS 3/8-16X1 1/2 GR5802-022C9.NUT LOCK 3/8-16 PLT803-013C10.NUT HEX TOP LOCK 5/8-11 PLT803-271C11.PENGO TRI-FLOW PILOT BIT820-232C12.PENGO AUGER TOOTH820-233C13.AUGER CUTTING TOOTH CARBIDE820-738C13.RHSNB 1/2-13X1 1/4 GR5802-214C14.NUT LOCK 1/2-13 PLT803-019C15.HHCS 1/2-13X3 1/2 GR5802-041C16.



Auger


26831



Down Pressure Update Kit 317-190A



Drawing Image NumberDwg 26831DOWN PRESSURE UPDATE KIT317-190A*TE 3/4MORB 3/4MJIC 3/4MJIC811-077C1.HH3/8R2 015 3/4FJIC811-949C2.AD 3/4FJIC 3/8MNPT841-323C3.

S/N 750391+TE 3/4MORB 3/4MJIC(2) SHUTTLE891-357C4.S/N 750390-RPBY 891-357C891-125C4.



Down Pressure Update Kit 317-190A


26833



Down Pressure W/ Up Relief PD25/35 & HD25/35



Drawing Image NumberDwg 26833PD25/35 DOWN PRESSURE KIT317-028A*PD25/35 DOWN PRESS CYL PLT RH317-022H1.PD25/35 DOWN PRESS CYL PLT LH317-023H2.TUBE RD 1 X .219 WL X 3 1/2317-026D3.PD25/35 BOOM CLAMP PLATE317-048D4.HHCS 1/2-13X2 1/4 GR5802-038C5.HHCS 1/2-13X5 1/2 GR5802-046C6.NUT LOCK 1/2-13 PLT803-019C7.PIN COTTER 3/16 X 1 3/4 PLT805-017C8.PIN 1 OD X 4 7/8 USEABLE805-229C9.CYL 2X8X1.12 ROD810-005C10.VALVE RELIEF W/TAMP PROOF CART810-297C11.PL 3/8MNPT BREATHER811-019C12.EL 3/4MJIC 3/4MORB811-063C13.TE 3/4MORB 3/4MJIC 3/4MJIC811-077C14.HH3/8R2 084 1/2MNPT 3/4FJIC811-258C15.HH3/8R2 015 3/4FJIC811-949C16.DECAL WARNING HYD PRESS LONG838-094C17.AD 3/4FJIC 3/8MNPT841-323C18.

S/N 750391+TE 3/4MORB 3/4MJIC(2) SHUTTLE891-357C19.S/N 750390-RPBY 891-357C891-125C19.



Down Pressure W/ Up Relief PD25/35 & HD25/35


18995



Down Pressure W/O Up Relief HD25 & HD35 3-Point



Drawing Image Numberdwg18995PD25/35 DOWN PRESSURE KIT317-028APIN COTTER 3/16 X 1 3/4 PLT805-017C1.PIN 1 OD - 4 7/8 USEABLE805-229C2.HH3/8R2 084 1/2MNPT 3/4FJIC811-258C3.EL 3/4MJIC 3/4MORB811-063C4.VALVE RELIEF W/TAMP PROOF CART810-297C5.AD 3/8MNPT 3/4MORB811-190C6.NUT LOCK 1/2-13 PLT803-019C7.PD25/35 DOWN PRESS CYL PLT RH317-022H8.TUBE RD 1 X .219 WL X 3 1/2317-026D9.PD25/35 DOWN PRESS CYL PLT LH317-023H10.HHCS 1/2-13X5 1/2 GR5802-046C11.RD TB 1 1/2 OD X .359 WL X 5/8317-054D12.PIN 3/4 X 5 23/32 USEABLE805-231C13.HHCS 1/2-13X2 1/4 GR5802-038C14.PD25/35 BOOM CLAMP PLATE317-048D15.

Refer to page 6-5 for breakdownCYL 2X8X1.12 ROD SINGLE ACTING810-005C16.PL 3/8MNPT BREATHER811-019C17.



Down Pressure W/O Up Relief HD25 & HD35 3-Point


14078



Hydraulic Cylinder (810-005C) Energy



Drawing Image NumberDwg 14078CYL 2X8X1.12 ROD SINGLE ACTING810-005C*EGY ROD 1.125DIA W/C0A0025261.

ObsoleteRPBY 0A002526A-25261.Available in Seal Kit #13 Only.BACK-UP RING2.Available in Seal Kit #13 Only.WIPER ROD3.Available in Seal Kit #13 Only.O-RING 1 1/8" ID X 1 3/8" OD4.

EGY PISTON ROD GUIDEA-19065.EGY CYLINDER BODYB-9886.

Available in Seal Kit #13 Only.O-RING 1 5/8" ID X 2" OD7.Available in Seal Kit #13 Only.O-RING 3/4" ID X 7/8" OD8.

EGY PISTONA-18459.EGY 7/8-14UNF REG HEX LOCK NUT8246410.EGY RETAINER RING INTERNAL8319811.

Available in Seal Kit #13 Only.BACK-UP RING 1 3/8" OD12.CYL SEAL KIT 2 X 8 (ENERGY)810-012C13.PIN CLEVIS 1 X 2 3/4 USABLE LG805-004C14.



Hydraulic Cylinder (810-005C) Energy


70978



QA Mount Without Hosses



Image No.Dwg 70978QA MOUNT W/O HOSES317-369A*HD BUCKET MOUNT CLEVIS WELD.317-080H1.ASY, CLEVIS WMT W/ PIN317-196A2.ASSY, HD25/35 QA MOUNT317-203A3.ASY, GBOX REST317-204A4.WMT, GBOX REST317-207H5.

S/N_______+WMT, QA FRAME HD25/35317-408H6.S/N _______-WMT, QA FRAME HD25/35317-201H6.

HHCS 3/8-16X4 1/4 GR5802-750C7.NUT FLANGE LOCK 3/8-16 PLT803-209C8.PIN COTTER 3/16 X 1 1/2 PLT805-104C9.PIN CLVS 1.0X4.69 USBL805-131C10.DECAL WARNING READ MANUAL838-293C11.

S/N_______+DECAL, DIG SAFE DANGER844-194C12.S/N _______- (Obsolete)RPBY 844-194C838-292C12.

DECAL LANDPRIDE 10" BROWN/GOLD848-159C13.



QA Mount Without Hosses


70137



Rock Auger



Image No.Dwg 70137HHCS 1/2-13X3 3/4 GR5802-042C1.NUT HEX NYLOCK 1/2-13803-147C2.BELLTEC AUGER TOOTH820-695C3.

Includes items 3 & 5BELLTEC BT500S PILOT BIT820-696C4.BOLT KIT, BELLTEC PILOT BIT891-835C5.PD 9 ROCK AUGER ASSY317-259A6.PD 12 ROCK AUGER ASSY317-260A6.PD 15 ROCK AUGER ASSY317-261A6.PD 18 ROCK AUGER ASSY317-262A6.PD 6 ROCK AUGER ASSY317-258A7.



Rock Auger


72272


Table of Contents Part Number IndexLand Pride Section 2: FramesPTO DRIVE

Frame PD10

Applies to PD10


Drawing Image NumberDwg 72272GEAR BOX DRIVELINE GUARD317-099D1.PD10 GEAR BOX AUGER GUARD317-124D2.PD10 SERIES YOKE WELDMENT317-137H3.PD10 SERIES YOKE WMT ORANGE317-137H823.PD10 SERIES BOOM WELDMENT317-138H4.PD10 SERIES BOOM WMT ORANGE317-138H824.

S/N 1403289+PD10 SMV BRKT317-414D5.SCREW SET SCKT HD 1/4-20X1 CP801-109C6.HHCS M8X1.25X16 GR8.8802-459C7.HHCS M8X1.25X70 GR 8.8802-730C8.NUT HEX 1/4-20 PLT803-006C9.

S/N 1403289+NUT HEX WHIZ 5/16-18 PLT803-043C10.NUT HEX NYLOCK M8X1.25 PLT803-278C11.WASHER SPRING LOCK M8 PLT804-157C12.WASHER FLAT M8 PLT804-161C13.PIN COTTER 3/16 X 1 3/4 PLT805-017C14.PIN COTTER 5/32 X 1 1/4 LG805-045C15.PIN CLVS .75X3.94 USBL805-228C16.PIN 3/4 X 5 23/32 USEABLE805-231C17.DRIVELINE CAT.2 X 34 SHEAR BL826-407C18.

(S/N 407446+)GBOX 3:1 1.25 RD IN/2 RD OUT826-446C19.(S/N 407445-)RPBY 826-446C826-337C19.S/N 1403289+RHSSNB 5/16-18X3/4 GR5842-491C20.Replacement Welding RequiredBALL BUSHING 3/4 BORE890-038C21.S/N 1403289+SMV MOUNTING SOCKET890-401C22.S/N 1403289+PD10 SMV MOUNT317-393S23.


Table of Contents Part Number IndexSection 2: Frames Land PridePTO DRIVE

Frame PD10

Applies to PD10

72275



Frame PD15

Applies to PD15


Drawing Image NumberDwg 7227515 SERIES YOKE WELDMENT317-012H1.15 SERIES YOKE WELDMENT ORANGE317-012H821.PD15 SERIES BOOM WELDMENT317-014H2.PD15 SERIES BOOM WMT ORANGE317-014H822.GEAR BOX AUGER GUARD317-016D3.

(S/N 831221+)GEARBOX DRIVELINE GUARD317-141D4.(S/N 831220-)GEAR BOX DRIVELINE GUARD317-017D4.S/N 1403289+PD15/25 SMV BRKT317-415D5.

SCREW SET SCKT HD 1/4-20X1 CP801-109C6.Rev. 2 not compat. w/Rev. 1.(S/N 203068+)HHCS 3/8-16X3/4 GR5802-014C7.Rev. 1(S/N 203067-)HHCS 5/16-18X3/4 GR5802-007C7.Rev. 2HHCS 3/8-16X2 3/4 GR5802-216C8.Rev 1; Use up stockHHCS 3/8-16 X 2 3/4 GR2802-547C8.

NUT HEX 1/4-20 PLT803-006C9.NUT LOCK 3/8-16 PLT803-013C10.

S/N 1403289+NUT HEX WHIZ 5/16-18 PLT803-043C11.(S/N 831221+)WASHER FLAT 3/8 USS PLT804-011C12.

Rev. 1(S/N 203067-)WASHER FLAT 5/16 SAE PLT804-036C12.Rev. 2 not compat. w/Rev. 1.(S/N 203068 to 831220 )WASHER FLAT 3/8 SAE PLT804-012C13.Rev. 2 not compat. w/Rev. 1.(S/N 203068+)WASHER LOCK SPRING 3/8 PLT804-013C14.Rev. 1(S/N 203067-)WASHER LOCK SPRING 5/16 PLT804-009C14.

PIN COTTER 5/32 X 1 1/4 LG805-045C15.PIN COTTER 3/16 X 2 1/4 PLT805-094C16.PIN CLEVIS 3/4 X 3 3/4 USEABLE805-228C17.PIN, 7/8 X 6 5/8 USABLE805-427C18.DRVLN C2 38 1.38-6 QD SHRBOLT826-887C19.

ObsoleteRPBY 826-887C826-164C19.Rev. 3 not compat. w/Rev. 2.(S/N 217210+) (SN

309074312716) (SN 323936+)GB 3.18:1 1.25 RD SFT(STD)826-312C20.

Rev. 2 not compat. w/Rev. 1.(S/N 203068217209)(SN203068309073)(312721323920)

GBOX 3.18:1 1.25 RD SHAFT (LG)826-211C20.

Rev. 1(S/N 203067-)RPBY 317-068A826-165C20.S/N 1403289+RHSSNB 5/16-18X3/4 GR5842-491C21.Replacement Welding RequiredBALL BUSHING 1 BORE890-008C22.Use as RequiredBUSHING 1 X 3/4 X 1890-331C23.S/N 1403289+SMV MOUNTING SOCKET890-401C24.S/N 831221+HHCS 3/8-16X3/4 GR5802-014C25.S/N 831220-HHCS 3/8-16X1 1/4 GR5802-079C25.S/N 1403289+PD15/25 SMV MOUNT317-394S26.



Frame PD15

Applies to PD15

72277



Frame PD25 & PD35

Applies to PD25, PD35


Drawing Image NumberDwg 7227725/35 SERIES YOKE WELDMENT317-013H1.25/35 SERIES YOKE WMT ORANGE317-013H821.PD25/35 SERIES BOOM WELDMENT317-015H2.PD25/35 SERIES BOOM WMT ORANGE317-015H822.GEAR BOX AUGER GUARD317-016D3.RD TB 1 1/2 OD X .359 WL X 5/8317-054D4.

S/N 831221+GEARBOX DRIVELINE GUARD317-141D5.S/N 831220-GEAR BOX DRIVELINE GUARD317-017D5.S/N 1403289+PD15/25 SMV BRACKET317-415D6.S/N 1403289+PD35 SMV BRACKET317-416D6.

SCREW SET SCKT HD 1/4-20X1 CP801-109C7.PD35 & PD25 S/N 831221+HHCS 3/8-16X3/4 GR5802-014C8.PD25 only S/N 831220-HHCS 3/8-16X1 1/4 GR5802-079C8.

HHCS 5/16-18X2 GR5802-115C9.Rev. 2HHCS 3/8-16X2 3/4 GR5802-216C10.Rev 1; Use up stockHHCS 3/8-16 X 2 3/4 GR2802-547C10.

NUT HEX 1/4-20 PLT803-006C11.NUT LOCK 3/8-16 PLT803-013C12.

S/N 1403289+NUT HEX WHIZ 5/16-18 PLT803-043C13.NUT HEX NYLOCK 5/16-18 PLT803-084C14.

S/N 831221+ As RequiredWASHER FLAT 3/8 USS PLT804-011C15.Rev. 2 not compat. w/Rev. 1.(S/N 203068 to 831220 on PD25 &

S/N 204283 to ______ on PD35)WASHER FLAT 3/8 SAE PLT804-012C15.

Rev. 1(S/N 203067- on PD25 & S/N204282- on PD35)

WASHER FLAT 5/16 SAE PLT804-036C15.

WASHER FLAT 3/8 SAE PLT804-012C16.Rev. 2 not compat. w/Rev. 1.(S/N 203068+ on PD25 & S/N

204283+ on PD35)WASHER LOCK SPRING 3/8 PLT804-013C17.


WASHER LOCK SPRING 5/16 PLT804-009C17.

PIN COTTER 3/16 X 1 3/4 PLT805-017C18.PIN COTTER 3/16 X 2 1/4 PLT805-094C19.PIN HITCH CATEGORY I-II805-227C20.PIN 3/4 OD - 5 23/32 USEABLE805-231C21.PIN, 7/8 X 6 5/8 USABLE805-427C22.

Rev. 3 not compat. w/Rev. 2.(S/N 217210+) (PD25 only) (SN309074312716) (SN 323936+)

GB 3.18:1 1.25 RD SFT(STD)826-312C23.

Rev. 2 not compat. w/Rev. 1.(S/N 203068217209) (PD25only)(SN 203068309073)(312721323920)

GBOX 3.18:1 1.25 RD SHAFT (LG)826-211C23.

Rev. 1(S/N 203067-) (PD25 only) Refer topage 4-1 for breakdown

RPBY 317-068A826-166C23.

Rev. 2 not compat. w/Rev. 1.(S/N 204283+) (PD35 only) Refer topage 4-6 for breakdown

GBOX 4:1 1.25 RD SHAFT826-212C23.

Rev. 1(S/N 204282-) (PD35 only) Refer topage 4-3 for breakdown

RPBY 317-069A826-167C23.

S/N 1403289+RHSSNB 5/16-18X3/4 GR5842-491C24.Replacement Welding RequiredBALL BUSHING 1 BORE890-008C25.S/N 1403289+SMV MOUNTING SOCKET890-401C26.Refer to page 3-2 for breakdown(Obsolete)

RPBY 826-886C826-163C27.

(S/N 1345949+ on PD35)DRVLN C3 38 1.38-6 QD TRQLMTR826-879C27.Obsolete Refer to page 3-3 forbreakdown

RPBY 826-879C826-173C27.

Rev. 2 not compat. w/Rev. 1.(S/N 203068+ on PD25 & S/N204283+ on PD35)

HHCS 3/8-16X3/4 GR5802-014C28.


HHCS 5/16-18X3/4 GR5802-007C28.



Frame PD25 & PD35


RevisionCommentsPart DescriptionPart No.Ref.S/N 1403289+PD15/25 SMV MOUNT317-394S29.



Frame PD25 & PD35 (continued)


This Page Intentionally Left Blank



Frame PD25 & PD35 (continued)


26859


Table of Contents Part Number IndexLand Pride Section 3: DrivelinesPTO DRIVE

Driveline (826-163C) Eurocardan Shear Bolt




*EC TWIST COLLAR R (TRACT. END)10042201.EC YOKE ASSEMBLY (TRACT. END)10140102.EC CROSS ASSEMBLY10040203.EC 8X55-DIN-1481 O/TUBE R/PIN63308554.EC OUTER TUBE YOKE17040275.DECAL DANGER GUARD MISS PTO818-540C6.EC OUTER TUBE (1524085) 820MM15240827.EC TUBE BEARING17842108.EC OUTER TUBE RIGID CONE18842019.EC OUTER TUBE187307410.EC SOFT CONE188420311.DECAL DANGER PTO DRIVELINE818-552C12.EC INNER TUBE187207413.EC INNER TUBE RIGID CONE188420214.

Rev. 2EC TUBE BEARING178421115.Rev 1; Use up stockEC TUBE BEARING IMP END178221115.

S/N 946472-DRIVELINE SHIELD SAFETY CHAIN04432116.Rev. 2EC 960MM INNER TUBE152508217.Rev 1; Use up stockRPBY 1525082153508217.

EC INNER TUBE YOKE170402918.EC YOKE ASSEMBLY IMP END107404019.EC PIN STOP ROTATION178421220.EC PULL COLLAR KIT100422521.EC YOKE ASSY (TRACTOR END)101401322.SHIELD KIT, AX3 & AX4826-553C23.WC ZERK M8 X 1 X 45 DEG08409924.


Table of Contents Part Number IndexSection 3: Drivelines Land PridePTO DRIVE



33498




Applies to PD15



*EC YOKE ASM (IMPLEMENT END)10120131.EC CROSS ASSEMBLY10020202.EC OUTER TUBE YOKE17020273.EC 8X55-DIN-1481 O/TUBE R/PIN63308554.EC OUTER TUBE (1523085) 830MM15230835.EC INN. STOCK LENGTH TB. 830MM15220836.EC 8X50-DIN-1481 ROLL PIN63308507.EC INNER TUBE YOKE17020298.EC YOKE ASSEMBLY IMP END10720409.EC TUBE BRG178221010.EC OUTER TUBE RIGID CONE188420111.EC STIFFENING RING121323312.EC SOFT CONE188420313.EC PIN STOP ROTATION178421214.EC OUTER TUBE (1873087) 750MM187307515.EC INNER TUBE (1872087) 750MM187207516.EC INNER TUBE RIGID CONE188420217.EC TUBE BRG IMP END178221118.SHIELD KIT, AX3 & AX4826-553C19.

S/N 946472-DRIVELINE SHIELD SAFETY CHAIN04432120.DECAL DANGER PTO DRIVELINE818-552C21.DECAL DANGER GUARD MISS PTO818-540C22.EC PULL COLLAR KIT EVOLUTION100422723.




Applies to PD15

10125



Driveline (826-173C) Eurocardan Clutch




*EC SNAP RETAINING RING63200801.EC CLOSURE RING11312252.EC ANTI-DUST RING17812263.

ObsoleteRPBY 158103715810384.EC PAWL (RADIAL) PIN KIT16011465.EC OUTER BODY16242486.RPBY 162424816222486.EC TORQUE LIMITER (LN2/4)16246257.RPBY 162462516242507.EC CROSS ASSEMBLY10040208.EC 8X65-DIN-1481 O/TUBE R/PIN63308659.EC OUTER TUBE YOKE170402710.DECAL DANGER GUARD MISS PTO818-540C11.

Rev. 2 not compat. w/Rev. 1.EC OUTER TUBE (1524085) 820MM152408212.Rev. 1EC OUTER TUBE (1524062) 640MM152406412.

EC TUBE BEARING178421013.EC OUTER TUBE RIGID CONE188420114.

Rev. 2 not compat. w/Rev. 1.EC OUTER TUBE (1873075) 740MM187307415.Rev. 1EC OUTER TUBE (1873075) 540MM187305615.

EC SOFT CONE188420316.DECAL DANGER PTO DRIVELINE818-552C17.

Rev. 2 not compat. w/Rev. 1.EC INNER TUBE (1872075) 740MM187207418.Rev. 1EC INNER TUBE (1872075) 560MM187205618.

EC INNER TUBE RIGID CONE188420219.EC TUBE BEARING178421120.

S/N 946472-DRIVELINE SHIELD SAFETY CHAIN04432121.Rev. 2 not compat. w/Rev. 1.EC 960MM INNER TUBE152508222.Rev. 1EC INNER TUBE (1525062) 640MM152506422.

EC INNER TUBE YOKE170402923.EC YOKE ASSEMBLY IMP END107404024.EC PIN STOP ROTATION178421225.SHIELD KIT, AX3 & AX4826-553C26.WC ZERK M8 X 1 X 45 DEG08409927.



Driveline (826-173C) Eurocardan Clutch


33499




Applies to PD10


Drawing Image Numberdwg33499DRIVELINE CAT.2 X 34 SHEAR BL826-407C*EC YOKE ASM (IMPLEMENT END)10120131.EC CROSS ASSEMBLY10020202.EC OUTER TUBE YOKE17020273.EC 8X55-DIN-1481 O/TUBE R/PIN63308554.EC OUTER TUBE (1523085) 830MM15230835.EC INN. STOCK LENGTH TB. 830MM15220836.EC 8X50-DIN-1481 ROLL PIN63308507.EC INNER TUBE YOKE17020298.EC YOKE ASSEMBLY IMP END10720409.EC TUBE BRG178221010.EC OUTER TUBE RIGID CONE188420111.EC STIFFENING RING121323312.EC SOFT CONE188420313.EC PIN STOP ROTATION178421214.EC OUTER TUBE (1873087) 650MM187306515.EC INNER TUBE (1872087) 650MM187206516.EC INNER TUBE RIGID CONE188420217.EC TUBE BRG IMP END178221118.SHIELD KIT, AX2826-556C19.

S/N 946472-DRIVELINE SHIELD SAFETY CHAIN04432120.DECAL DANGER PTO DRIVELINE818-552C21.DECAL DANGER GUARD MISS PTO818-540C22.EC PULL COLLAR KIT EVOLUTION100422723.




Applies to PD10

73027



Driveline (826-879C) Comer



Image No.Dwg 73027DRVLN C3 38 1.38-6 QD TRQLMTR826-879C*COMP BIDIRECT RATC CLUTCH COMR14424605111.CROSS JOURNAL SET COMER1800141302.

ObsoleteRPBY 151.014.006.115101400613.ROLL PIN FOR OUTER TUBE COMER1900000144.OUTER TUBE COMER15214066907105.INNER TUBE COMER1531405446.

ObsoleteRPBY 190.000.0121900000127.INNER YOKE COMER15101400718.COMP SPECIAL RND BORE YOKE COM14102433519.GRD RETAIN COLLAR FOR OUT TUBE18001423310.

ObsoleteRPBY 180.014.24018001424011.GUARD RETAIN COLLAR INNER TUBE18001423212.COMP GUARD W/ INST MAN. COMER142240530742113.

ObsoleteRPBY 190.000.02019000002014.COMER GREASE FITTING190.000.02014.COMER BALL 1/2"19000007815.

ObsoleteRPBY 190.000.04719000004716.OUTER CASTING WITH YOKE COMER141024206117.INNER SPRING COMER18001303318.OUTER SPRING COMER18001303219.RATCHET TOOTH COMER18001516820.HUB M24 COMER15101331621.RETAINING WASHER COMER18001513722.GREASE PROTECTION COMER18001333423.CIRCLIP COMER19000017824.COMER SPRING18001648725.

ObsoleteRPBY 151.016.48615101648626.ObsoleteRPBY 190.000.45119000045127.

U JOINT OUTER TUBE COMER1210241291128.U JOINT INNER TUBE COMER1210241301129.HALF FEMALE GUARD COMER142246224742130.HALF MALE SHIELD COMER142247234742131.HALF F SHAFT WITH GUARDING COM1233404001132.HALF M SHAFT WITH GUARDING COM1234407731133.

ObsoleteRPBY 190.000.09819000009834.ObsoleteRPBY 190.000.09919000009935.

LABEL WITH CUSTOMER CODE COMER190000100036.





73025




Applies to PD15


Image No.Dwg 73025DRVLN C2 38 1.38-6 QD SHRBOLT826-887C*COMPLETE COLLAR YOKE COMER141.022.324.11.CROSS JOURNAL SET COMER180.012.1302.

ObsoleteRPBY 141.022.514.114102251413.CO SPECIAL RND BOR PIN HOL YOK141.022.514.13.CO GRD RET COLLAR OUTER TUBE81800121844.

ObsoleteRPBY 180.014.24081800142405.CO GRD RET COLLAR INNER TUBE81800121836.COMP GUARD W/ INST MAN. COMER14222035872217.

ObsoleteRPBY 190.000.0201900000208.COMER GREASE FITTING190.000.0208.CO HALF F. SHAFT WITH GUARDING8123320206119.CO HALF MALE SHAFT WITH GUARD81234204001110.

ObsoleteRPBY 190.000.09819000009811.ObsoleteRPBY 190.000.09919000009912.ObsoleteRPBY 165.000.62816500062813.ObsoleteRPBY 190.000.1007190000100714.

CO LABEL WITH CUSTOMER CODE190.000.100714.




Applies to PD15

73029




Applies to PD10


Image No.Dwg 73029DRVLN C2 34 1.38-6 QD SHRBOLT826-890C*COMPLETE COLLAR YOKE COMER141.022.324.11.CROSS JOURNAL SET COMER180.012.1302.

ObsoleteRPBY 141.022.514.114102251413.CO SPECIAL RND BOR PIN HOL YOK141.022.514.13.CO GRD RET COLLAR OUTER TUBE81800121844.

ObsoleteRPBY 180.014.24081800142405.CO GRD RET COLLAR INNER TUBE81800121836.CO COMP GRD WITH INST MANUAL14222027072217.

ObsoleteRPBY 190.000.0201900000208.COMER GREASE FITTING190.000.0208.CO HALF F. SHAFT WITH GUARDING8123320096119.CO HALF MALE SHAFT WITH GUARD81234204011110.

ObsoleteRPBY 190.000.09819000009811.ObsoleteRPBY 190.000.09919000009912.ObsoleteRPBY 165.000.62816500062813.

CO LABEL WITH CUST CODE190000101114.




Applies to PD10

14552


Table of Contents Part Number IndexLand Pride Section 4: GearboxesPTO DRIVE

Gearbox (826-165C) ITG

Applies to PD15


Drawing Image Numberdwg14552RPBY 317-068A826-165CITG HANGER CAP 01-082N/A1.ITG 1/2"-14 PIPE PLUG09-0022.ITG M10 X 1.5 X 30 CAP SCREW06-0033.ITG M10 LOCKWASHER07-0014.ITG OUTPUT GASKET CAP 0.30MM08-0215.ITG OUTPUT CAP GASKET 0.25MM08-0226.ITG OUTPUT CAP GASKET 0.40MM08-0237.ITG BEARING ASSEMBLY04-0118.ITG GEAR ADJUSTING SHIM 0.5017-0039.ITG 33 TOOTH OUTPUT GEAR03-03210.

Rev. 2BEARING BALL 6207822-166C11.Rev 1; Use up stockRPBY 822-166C04-00411.

ITG BEARING SPACER10-00812.ITG RETAINING RING21-00613.ITG 11 TOOTH PINION & SHAFT03-03314.ITG INPUT SEAL05-01015.ITG RETAINING RING21-00416.ITG HOUSING 01-08218-01317.ITG OUTPUT SHAFT OIL SEAL05-00818.ITG OUTPUT BEARING SPACER10-01119.ITG RETAINING RING21-00120.ITG GEAR ADJUSTING SHIM 0.3017-00221.ITG OUTPUT SHAFT02-02922.ITG HANGER SHAFT02-02723.ITG COTTER PIN12-00324.


Table of Contents Part Number IndexSection 4: Gearboxes Land PridePTO DRIVE


Applies to PD15

14619




Applies to PD25


Drawing Image Numberdwg14619RPBY 317-068A826-166CITG HANGER CAP 01-08320-0121.ITG 1/2"-14 PIPE PLUG09-0022.ITG M10 X 1.5 X 30 CAP SCREW06-0033.ITG M10 LOCKWASHER07-0014.ITG OUTPUT CAP GASKET 0.10MM08-0155.ITG OUTPUT CAP GASKET 0.25MM08-0166.ITG BEARING ASSEMBLY04-0117.ITG GEAR ADJUSTING SHIM 0.5017-0038.ITG 38 TOOTH OUTPUT GEAR03-0289.






Applies to PD25

26950




Applies to PD35


Drawing Image Numberdwg26950RPBY 317-069A826-167CITG HANGER CAP 01-08420-0131.ITG 1/2"-14 PIPE PLUG09-0022.ITG M10 X 1.5 X 30 CAP SCREW06-0033.ITG M10 LOCKWASHER07-0014.ITG OUTPUT CAP GASKET 0.10MM08-0185.ITG OUTPUT CAP GASKET 0.25MM08-0196.ITG BEARING ASSEMBLY04-0117.ITG GEAR ADJUSTING SHIM 0.5017-0038.ITG 44 TOOTH OUTPUT GEAR03-0309.






Applies to PD35

16469






Drawing Image Numberdwg16469GBOX 3.18:1 1.25 RD SHAFT (LG)826-211C*COMER VENT #8.6.7.00269826-497C1.RPBY 802-079C1100012.OMNI LOCKWASHER 3/81300003.OMNI TOP CAP0200014.OMNI COTTER PIN1000005.PIN 7/8 OD X 7 5/16 USABLE805-272C6.OMNI TOP GASKET, 0.50MM 6 BOLT0701307.OMNI TOP GASKET, 0.15MM 6 BOLT0701298.OMNI TOP GASKET, 0.10MM 6 BOLT0701289.OMNI BEARING CUP, (LM-104911)05000410.OMNI BEARING CONE, (LM-104949)05000511.OMNI GEAR, 35T03000112.OMNI OUTPUT SHAFT04000013.OMNI KEY, WOODRUFF08000014.OMNI, OUTPUT SEAL 3 LIP06005315.OMNI HOUSING01005816.OMNI PLUG, SOCKET HD. 1/2 PIPE14000417.OMNI INPUT GASKET, 0.10MM 4BLT07015018.OMNI INPUT GASKET, 0.15MM 4BLT07014919.OMNI INPUT GASKET, 0.50MM 4BLT07000020.OMNI INPUT CAP02010621.OMNI BEARING CUP, (LM-11910)05000222.OMNI BEARING CONE, (LM-11949)05000323.OMNI SCREW,HEX 3/8-16UNC X 1L11000024.OMNI INPUT PINION, 11T 7.26LG03043325.OMNI BEARING CONE, (LM-67048)05000126.OMNI BEARING CUP, (LM-67010)05000027.OMNI SEAL, INPUT06004528.





16470




Applies to PD35


Drawing Image Numberdwg16470GBOX 4:1 1.25 RD SHAFT826-212COMNI PLUG VENT 1/2-14 NPTF1400331.OMNI SCREW,HEX 7/16-14UNCX1.251100032.OMNI LOCKWASHER 7/16 SPLIT TYP1300053.OMNI CAP, TOP0202274.OMNI COTTER PIN1000005.OMNI MOUNTING SHAFT0400016.OMNI GASKET 0.10MM0700437.OMNI GASKET 0.15MM0700448.OMNI GASKET 0.50MM0700459.OMNI BEARING CUP, (LM-104911)05000410.OMNI BEARING CONE, (LM-104949)05000511.OMNI GEAR, 44T03010612.OMNI SPACER09001213.OMNI SHAFT, OUTPUT04007114.OMNI OUTPUT SEAL, 3-LIP06000115.OMNI HOUSING01002716.OMNI PLUG, SOCKET HD. 1/2 PIPE14000417.OMNI GASKET 0.10MM07001918.

ObsoleteOMNI GASKET 0.15MM07002019.OMNI GASKET 0.50MM07002120.OMNI SHAFT, SUPPORT02012321.OMNI GASKET07015422.OMNI CAP INPUT02012223.OMNI BEARING CUP, (LM-11910)05000224.OMNI BEARING CONE, (LM-11949)05000325.OMNI SCREW,HEX 3/8-16UNC GR511000126.OMNI LOCKWASHER13000227.RPBY 802-159C11000428.RPBY 804-009C13000629.OMNI PINION, 11T03019930.OMNI BEARING, CONE 14137A05003031.OMNI BEARING, CUP 1427605003132.OMNI SEAL, INPUT06004533.




Applies to PD35

22170



Gearbox (826-312C) Comer (New)



Drawing Image NumberDwg 221709.196.003.00GB 3.18:1 1.25 RD SFT(STD)826-312C

*CO CASTING0.196.0303.001.CO SHIM KIT (51.1X63)0.196.7500.002.CO CROWN GEAR Z35 M5.080.196.6000.003.CO ROLLER BRG LM67048-LM670108.0.9.025314.CO DUST LIP 50.8X66.62X7.928.7.1.025295.CO PINION Z11 M5.080.196.5000.006.CO BOLT M10X25 8.88.1.1.000617.

ObsoleteRPBY 802-609C8.1.1.000738.CO TOP PLATE0.196.1304.009.CO OUTPUT SHAFT0.196.3001.0010.CO PLUG 1/2" GAS8.6.5.0020311.CO ROLLR BRG LM104949-LM1049118.0.9.0253212.CO DUST LIP 31.75X44.5X7.928.7.1.0253013.CO COVER0.196.1305.0014.CO WOODRUFF KEY 7.94mmx16.28mm0.196.7000.0015.CO ROLLER BRG LM11910-LM119498.0.9.0253316.CO OIL PLUG 3/88.6.5.0000617.CO SHIM KIT (32X44)0.212.7500.0018.CO SHIM KIT (19.3X30)0.216.7500.0019.


Table of Contents Part Number IndexSection 4:

post hole digger - great plains...26. 317-071a hd25 post hole digger assy includes items #16 through...

Documents