portfolio td520067en mounting accessory options

3
Portfolio MOUNTING ACCESSORIES Catalog # Type Date Project Comments Prepared by TD520067EN 2017-03-21 11:57:26 Mounting Accessories and options A B FIGURE 1. FIGURE 2. FIGURE 3. SLOPE ADAPTORS HSA-4 = 4” HSA-6 = 6” HSA-8 = 8” Slope adapters for use with recessed fixtures. .050 spun aluminum, matte white finish. Available in 5º, 10º, 15º, 20º, 25º, 30º, 35º 40º and 45º slopes. Add slope desired after catalog number (e.g.) HSA-5-20) (Figure 1.). SLOPE ADAPTORS HB26 = Pre sized for 24” on center ceiling grids. End of bar folds over to lock bar onto grid without interference from adjacent tile. Can also be used with 16” O.C. grids. Recommended for use in seismic areas. For use with any recessed fixture with universal mounting bracket (Figure 2.). WOOD JOIST BAR HANGERS RMB-22 = 22” long (2 per set). For Mounting almost any Portfolio housing in wood joists up to 24” (Figure 3.). 1-1/2”X 50” C-CHANNEL BAR HANGERS HB50 = 50” long (2 per set) For use with any recessed fixture with universal mounting brackets (Figure 4.) “A”= Location of plaster ground “B”= Ceiling opening HSA-4= 4-1/6”(103mm) HSA-4=10-3/8”(264mm) HSA-6= 4-5/16”(110mm) HAS-6=11-5/8”(295mm) HSAC-6= 4-1/8”(105mm) HSAC-6=11-5/8”(295mm) HSA-8= 5-11/16”(144mm) HSA-8=15-3/4”(400mm)

Upload: others

Post on 30-Apr-2022

4 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Portfolio TD520067EN Mounting Accessory Options

Portfolio

MOUNTING ACCESSORIES

Catalog # Type

Date

Project

Comments

Prepared by

TD520067EN2017-03-21 11:57:26

Mounting Accessories and options

A

B

FIGURE 1.

FIGURE 2.

FIGURE 3.

SLOPE ADAPTORS HSA-4 = 4” HSA-6 = 6” HSA-8 = 8”

Slope adapters for use with recessed fixtures. .050 spun aluminum, matte white finish. Available in 5º, 10º, 15º, 20º, 25º, 30º, 35º 40º and 45º slopes. Add slope desired after catalog number (e.g.) HSA-5-20) (Figure 1.).

SLOPE ADAPTORSHB26 = Pre sized for 24” on center ceiling grids. End of bar folds over to lock bar onto grid without interference from adjacent tile. Can also be used with 16” O.C. grids. Recommended for use in seismic areas. For use with any recessed fixture with universal mounting bracket (Figure 2.).

WOOD JOIST BAR HANGERSRMB-22 = 22” long (2 per set).For Mounting almost any Portfolio housing in wood joists up to 24” (Figure 3.).

1-1/2”X 50” C-CHANNEL BAR HANGERSHB50 = 50” long (2 per set) For use with any recessed fixture with universal mounting brackets (Figure 4.)

“A”= Location of plaster ground “B”= Ceiling opening

HSA-4= 4-1/6”(103mm) HSA-4=10-3/8”(264mm)

HSA-6= 4-5/16”(110mm) HAS-6=11-5/8”(295mm)

HSAC-6= 4-1/8”(105mm) HSAC-6=11-5/8”(295mm)

HSA-8= 5-11/16”(144mm) HSA-8=15-3/4”(400mm)

Page 2: Portfolio TD520067EN Mounting Accessory Options

Specifications and dimensions subject to change without notice.

Cooper Lighting Solutions 1121 Highway 74 SouthPeachtree City, GA 30269P: 770-486-4800www.cooperlighting.com

MOUNTING ACCESSORIES AND OPTIONS

Aircraft Cable for 4, 6, and 8-inch Type

AC120P=120" Aircraft Cable-WhiteAC48P=48" Aircraft Cable-WhiteAC120MB=120" Aircraft Cable-BlackAC48MB=48" Aircraft Cable-Black

3C=3 conductor for use with 120V 2-wire drivers1

Blank=5 conductor for use with 0-10V dimming drivers1

6C=6 conductor for use with DL3 3-wire dimming drivers1

5C=5 conductor for use with D5LT drivers1

SAMPLE NUMBER: P836MB6C = 36" pendant kit for use with DL3 drivers

Pendant Kits Finish Type (with notes) Length

P836=Pendant Kit for 6 and 8-inch cylinder, 36”P436=Pendant Kit for 4-inch cylinder, 36”P236=Pendant Kit for 2-inch round cylinder, 36”PSQ236=Pendant Kit for 2-inch square surface mountH836=Pendant Kit for incandescent cylindersC836=Pendant Kit for compact fluorescent cylinders

P=WhiteBZ=BronzeMB=Matte BlackSL=Silver

3C=3 conductor for use with 120V 2-wire driversBlank=5 conductor for use with 0-10V dimming drivers6C=6 conductor for use with DL3 3-wire dimming drivers5C=5 conductor for use with D5LT driversDMX=No conductor for use with DMX drivers

Blank=36"SP*=*Specify 6" to 144" in 1" increments

SAMPLE NUMBER: 2RCPSMLP = Low profile canopy for 2-inch junctionbox

2-Inch Canopies Size Finish

2RCP=Round2SQCP=Square Canopy

SML=For 2-inch junction boxSTAN=For standard junction box

P=WhiteMB=BlackSL=SilverB2=Bronze

Notes: 1 4", 6" and 8" only.

Page 3: Portfolio TD520067EN Mounting Accessory Options

Specifications and dimensions subject to change without notice.

Cooper Lighting Solutions 1121 Highway 74 SouthPeachtree City, GA 30269P: 770-486-4800www.cooperlighting.com

MOUNTING ACCESSORIES AND OPTIONS

FIGURE 4.

P836

5-3/5”(146mm)

5-3/32”(129mm)

37” (940mm)

FIGURE 5.

5 ” (127mm)

5-1/32(129.36mm)

“X”

FIGURE 6.

37.063941.40

5

67

4

2

8

3

10

14

1

11

12

15

9

Ø 5.750146.05

35.351897.91

Round

FIGURE 6.

3

7

2

9

13

10

11

12

15

14

8

4

5

1

6

Square