polyurethane belts for food application industry · from low temperature freezer in-feed to...
TRANSCRIPT
POLYURETHANEBELTS FOR FOOD
INDUSTRY
PELOSI BLUEDRIVEis a range of extruded,
homogeneous conveyorbelts manufactured inwidth up to 500 mm.PELOSI BLUEDRIVE
technology combines flat, homogeneous thermoplastic
material, and the positive drive feature of modular
plastic belting.PELOSI BLUEDRIVE smooth, easy-to-clean surface reduce
the risk of microbiological contamination and its tension
members minimize belt and improve belt stability.
BLUEDRIVE
APPLICATION
PRODUCTS
ABOUT US
PolyurethaneRound-Belt and V-Belt
Guides
Cleats
Sidewall
Bluedrive
Customized Profile
BLUEDRIVE
WASH THE BELTWITH WATER
BRUSH THE BELTON THE CONVEYOR
CLEAN THE BELTON THE CONVEYOR
APPLICATION
PRODUCTS
ABOUT US
PolyurethaneRound-Belt and V-Belt
Guides
Cleats
Sidewall
Bluedrive
Customized Profile
TOP TPU BELT MATERIAL FOR FOOD SAFETY Pelosi BLUEDRIVE belts are manufactured using high quality TPU, which features superior durability and hydrolysis resistance, and is inherently resistant to microbial contamination.They are able to work in a wide temperature range: from low temperature freezer in-feed to high-temperature fryer out-feeds (-20°C/+°80C)
SAFETY MATERIAL Pelosi BLUEDRIVE belts guarantee the currently relevant EU and US regulations applicable to conveyor belts in direct food contact.
MONOLITHIC BELT DESIGNThe fully extruded monolithic belt design of Pelosi is completely free of fabric that could fray during use and pose a food safety risk.The solid flexible design without nose gap between teeth ensures a significantly greater service life, with a high level of hygienic integrity. No risk of slippage, even in greasy and humid environment.
ARAMID REINFORCED BELT DESIGNPelosi BLUEDRIVE is designed with aramid tensile cord for continuous dimensional stability.The cord are fully embedded in the thermoplastic polyurethane raw material.This extends the belt service life through reliable sprocket engagement and non-slip pulley action, which reduce belt wear, maintenance and downtime.
3 STEPS TO CLEAN YOUR BELT
1 2 3
BLUEDRIVE
APPLICATION
PRODUCTS
ABOUT US
PolyurethaneRound-Belt and V-Belt
Guides
Cleats
Sidewall
Bluedrive
Customized Profile
PELOSI BLUEDRIVE MAIN FEATURES
• Easy and effective clean in place process
• Urethane material compatible with wash down environments
• Tension members provide high strength, low stretch
• Sealed edges prevent ingress of microbes and reduction of bacteria growth
• No fragmenting or chipping, compared with modular belts
• Environmental sustainability thanks to the reduction of cleaning labour and water usage
• Reduced maintain and sanitation costs and reduced downtime
• Sprockets compatibility: drop in replacement for most 2 “plastic modular belt, 4” minimum ø
• Longer belt life due to minimal belt stretch.
APPLICATION FIELDS
FISH PROCESSING MACHINES SEAFOOD
FRUIT & VEGETABLES
MEAT/POULTRY
CHEESE DAIRIES
BLUEDRIVE
APPLICATION
PRODUCTS
ABOUT US
PolyurethaneRound-Belt and V-Belt
Guides
Cleats
Sidewall
Bluedrive
Customized Profile
PELOSI BLUEDRIVE PRODUCT RANGE
PELOSI BLUEDRIVE 10 PELOSI BLUEDRIVE 10K PELOSI BLUEDRIVE 20 PELOSI BLUEDRIVE 20K
PELOSI BLUEDRIVE FLAT 2 PELOSI BLUEDRIVE FLAT 2K PELOSI BLUEDRIVE FLAT 3 PELOSI BLUEDRIVE FLAT 3K
CUSTOM FABRICATION
BELT ACCESSORIES - CLEATS /V GUIDE The use of options and modifications to light conveyors belt and our BLUEDRIVE conveyors can enhance the possibility in your applications. Options such as flights, sidewalls, guiding profiles and different machining sources can optimize the product and improve the usage.
CLEATS A variety of more than 250 standard cleats and V guide solutions can be found in our site www.extrudingskill.com in the chapter guides, cleats, sidewall. Depending on the application and product shape, customized cleats can be cut out and flat flight material according to your drawing.We are able to customize cleats can help to support your convey products.
V GUIDE ON THE COVER In light conveyors and BLUEDRIVE conveyors, slots can be grinded trough the drive bars in running direction for different purposes, such as better belt tracking. In addition, profile can be welded into the slots for guiding purpose as well. The edge sections of the drive bars can be grinded away to close gaps at the belt edge and to guide the conveyors.
V GUIDE ON THE BOTTOMTracking guides are placed on the running side of conveyor belts. This provide true conveyor tacking in applications where long narrow belts are used for conveying products.Tracking guides are also common where products are side loaded, which could otherwise cause a lateral shift in the conveyor’s direction of travel.The tracking guide can be notched to provide maximum flexibility around the pulleys.
BLUEDRIVE
APPLICATION
PRODUCTS
ABOUT US
PolyurethaneRound-Belt and V-Belt
Guides
Cleats
Sidewall
Bluedrive
Customized Profile
13
20
R1
3
13
30
R1
3
13
40
R1
3
13
50
R1
3
13
60
R1
3
13
80
R1,2
T S
ER
IES
TC
SE
RIE
S
6
4
8
5
10
6
13
8
17
11
22
14
SIDEWALLSidewall can be added in different height and thickness.For the technical information , see in our websitewww.extrudingskill.com in the chapter sidewall.Customize sidewalls help to optimize the belt features to specific application needs.Extruding bord flexible and wear resistant corrugated sidewall profiles can be applied on TPU light conveyors and BLUEDRIVE processing belts.Extruding bord can be used in a wide range of applications in order to contain bulk goods at the side of conveyor belts.
SPROCKETSDifferent sprocket sizes are provided as standard for our two positively driven models with different bores for installation.One key point is the additional need for wearstrips on conveyors running on slider surface in order to reduce the coefficient of friction. We recommend to use only UHMWPE material for wearstrips to optimize the belt performance.
JOINTING OPTIONS
BUTT JOINT The fastest and easiest way to join BLUEDRIVE is a butt / head-to-head welding machine. The two ends of a belt are prepared on a machine where a heating plate is used to melt and weld the two ends.
FINGER JOINT A standard vulcanizing machine is used to weld the BLUEDRIVE FLAT by using a single finger joining method (80x20 mm fingers).
MECHANICAL AND PLASTIC FASTENERSPlastic fasteners can be supplied to facilitate belt installations in difficult locations.
BLUEDRIVE
APPLICATION
PRODUCTS
ABOUT US
PolyurethaneRound-Belt and V-Belt
Guides
Cleats
Sidewall
Bluedrive
Customized Profile