polycarbonate information
TRANSCRIPT
-
7/27/2019 Polycarbonate Information
1/7
1. EASY AND LOW-COST INSTALLATION
INSTALLATION VIDEO
http://www.youtube.com/watch?v=w9U6qZoigY8&feature=youtu.be
To ensure compliance with snow load and negative wind load resistance requirements,anchor brackets should be fitted for each purlin.
The polycarbonate panels are fastened to the underlying structure using specific
brackets, which must be anchored to the purlins using suitable self-drilling/self-tappingscrews (on metal structures) and tap bolts (for wooden structures). These screws andbolts are not supplied.
Different connector profiles can be used, depending on the required load specifications.
system with aluminium connector system with polycarbonate covergasket
Fixing systems
For the installation of the arcoPlus626revers, system. Follow the illustrations to the right.
The fixing of the polycarbonate to the structure below it must be carried out using purpose-made stainless steel brackets, fastened to all the purlins with self-perforating, self-threading
screws (on metallic structures) and mordant (wooden structures).
To close the ends of the panels use a transparent polycarbonate blocking profile, while the
covergasket profile has a stopper.
In the case a aluminium connector profile is used, this allows for the tightening of screws, in
order to guarantee a perfect hold for the whole system.
http://www.youtube.com/watch?v=w9U6qZoigY8&feature=youtu.behttp://www.youtube.com/watch?v=w9U6qZoigY8&feature=youtu.be -
7/27/2019 Polycarbonate Information
2/7
1 - Plane anchorage of panel to
structure
2 - Vertical anchorage of panel
to structure
3 - Clicking in the cover gasket 4 - Insertion of block on the
outside of the panels and closing
stopper on gasket cover
5 - Final view of polycarbonate
covergasket
6 - Final view with aluminium
connector
Detail terminal Detail start
-
7/27/2019 Polycarbonate Information
3/7
2. MODULARS PANELS OF UNPROTECTED
ALVEOLAR POLYCARBONATE FOR
CEILINGS AND MOVABLE WALLS
Velario613 Velario20-5, are modulars systems used in residential and industrialbuildings, for new buildings as well as for renovation and maintenance operations.
It consists of polycarbonate panels with male-female connection.
They are ideal for all those cases where a thermal insulation is required with a rapid andsimple installation.
Advantages
Easy and low-cost installation
Self-supporting Light transmission
Heat insulation
Specifications
Ceiling installation made with modular multiwall unprotected polycarbonate panels, a
thickness of 10mm /20mm on complete section. Thermal transmission coefficient Velario
613, U=1,7 W/m2KVelario20-5 , obtained through air chambers inside the panel.
PRODUCTION STANDARDS
Velario613 Velario20-5
Thickness10mm 20mm
Structure3 walls 5 walls
Modular width605mm 667mm
Panel length
No limits No limits
-
7/27/2019 Polycarbonate Information
4/7
TECHNICAL FEATURES
Velario613 Velario20-5
Thermal transmittance2,7 W/ m2K 1,7 W/ m2K
Isolation acoustique 16dB 16dB
Linear thermal expansion0,065mm/mC 0,065mm/mC
Use temperature-40C +120 C -40C +120 C
Fire reaction EN 13501b - s1, d0 b - s1, d0
OPTICAL PROPERTIES
Velario613 Velario20-5
Lighttransmission(LT)%
Solar Factor(SF)%
Lighttransmission(LT)%
Solar Factor(SF)%
Satin
Crystal 76 81 70 74
Satin Opal58 65 52 57
3. POLYCARBONATE CORRUGATED SHEETS WITH
"MICROALVEOLARe" STRUCTURE
TEGOPLUS corrugated sheet of polycarbonate microalveolare structure produced in
different profiles for the construction of skylights, walls, transparent roofs also in combination
with cover plates and insulated panels.
The versatility of this product allows you to create skylights, gutter-ridges or eave inter-
layers.
Download the new catalog TEGOPLUS
.
ADVANTAGES
Easy and low-cost installation.
http://www.gallina.it/doc/cataloghi/edilizia/TEGOPLUS_EN.pdfhttp://www.gallina.it/doc/cataloghi/edilizia/TEGOPLUS_EN.pdf -
7/27/2019 Polycarbonate Information
5/7
Light transmission
Resistance to U.V. rays and to hail
Le Longitudinal and transverse overlap
APPLICATIONS
Curtain walls
Covering and skylights
PROFILE RANGE
The profiles drawings of polycarbonate "microalveolare" structure sheets TEGOPLUS
hereby included are just examples of products available from stock. With the new production
technology any kind of requested profile could be obtained.
4. Multiwall U.V. protected polycarbonate sheets
Reference: http://www.gallina.it/en/prodotti/index.php?prod=221
The characteristic structure of the multiwall sheets with air space inside guarantees goodthermal insulation and excellent resistance to crash stress. The external side of Policarb is
http://www.gallina.it/en/prodotti/index.php?prod=221http://www.gallina.it/en/prodotti/index.php?prod=221 -
7/27/2019 Polycarbonate Information
6/7
coated with U.V. protection (on request both sides) warranting resistance to aging due to
atmospheric agents and UV rays.
Policarb is used for roofing, windows, skylights, greenhouses, porches,
-
7/27/2019 Polycarbonate Information
7/7