polite enterprises corporation · polite enterprises corporation victoria 274 wolseley place,...

1
HEAVY DUTY STANDARD OR HEAVY DUTY SLOW-GO SPEED CONTROL SYSTEM? It depends entirely on your traffic flow conditions. Our standard SLOW-GO Speed Control System has been manufactured to cope with the weight of any fully loaded semi-trailer. However, we recommend the use of our specifically designed Heavy Duty system for installations where truck traffic is frequent. STANDARD SLOW-GO: the 1 metre standard modules have been independently tested 1 to withstand 75 tonnes of downforce per square foot. HEAVY DUTY SLOW-GO: the 1 metre heavy duty modules have been independently tested 1 to withstand 100 tonnes of downforce per square foot. NOTES 1. Independent weight tests conducted by Royal Melbourne Institute of Technology, Department of Mechanical and Manufacturing Engineering. Complete test procedures and results are available for viewing on request. Designed to comply with Australian Standard 2890.1 -1993. Extremely strong and hardwearing – Heavy Duty SLOW-GO modules can withstand 100 tonnes downforce per square foot. Unique interlocking modules – Overcomes difficulty fixing to unstable road surfaces. Greater flexibility Heavy Duty SLOW-GO modules come in 1 metre and 1/2 metre lengths. Only 55mm high – Heavy Duty SLOW-GO has a unique diagonal striped pattern creating the illusion of appearing higher than it actually is, ensuring superior traffic control. Simple and inexpensive to install – Comes complete with fixings suitable for asphalt or concrete. Uses 8 fixings per 1 metre module. Safety yellow tapered end caps – Clearly delineates the speed hump for additional safety. Anti-rust and corrosion resistant – A combination of technologically advanced polyurethane and epoxy coatings are used to ensure durability and maximum life. HEAVY DUTY SLOW-GO Speed Control System SPECIFICATIONS Height: – 55mm Width: – 485mm Length: – 1000mm (500mm) 120 140 55 140 185 1000 (500) 185 485 POLITE ENTERPRISES CORPORATION Victoria 274 Wolseley Place, Thomastown VIC 3074 T: 03 9462 7400 | F: 03 9462 7411 E:[email protected] New South Wales Australian Capital Territory 8/28 Garling Rd, Kings Park NSW 2148 T: 02 9831 2855 | F: 02 9831 2822E:[email protected] Queensland 3972 Pacific Highway, Loganholme QLD 4129T: 07 3387 0160 | F: 07 3387 0159 E:[email protected] South Australia, Western Australia Northern Territory, Tasmania T: 1800 069 784 E:[email protected] Fixing 003 Fixing 005

Upload: others

Post on 21-Sep-2020

3 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: POLITE ENTERPRISES CORPORATION · POLITE ENTERPRISES CORPORATION Victoria 274 Wolseley Place, Thomastown VIC 3074 T: 03 9462 7400 | F: 03 9462 7411 E:info@polite.com.au New South

HEAVY DUTY

STANDARD OR HEAVY DUTY SLOW-GO SPEED CONTROL SYSTEM?It depends entirely on your traffic flow conditions. Our standard SLOW-GO Speed Control System has been manufactured to cope with the weight of any fully loaded semi-trailer. However, we recommend the use of our specifically designed Heavy Duty system for installations where truck traffic is frequent.

• STANDARD SLOW-GO: the 1 metre standard modules have been independently tested1

to withstand 75 tonnes ofdownforce per square foot.

• HEAVY DUTY SLOW-GO: the 1 metre heavy duty modules have been independently tested1

to withstand 100 tonnes ofdownforce per square foot.

NOTES 1. Independent weight tests conducted by Royal Melbourne Institute of Technology, Department of Mechanical and

Manufacturing Engineering. Complete test procedures and results are available for viewing on request.

Designed to comply with Australian Standard 2890.1 -1993.Extremely strong and hardwearing – Heavy DutySLOW-GO modules can withstand 100 tonnes downforce per square foot.

Unique interlocking modules – Overcomesdifficulty fixing to unstable road surfaces.

Greater flexibility – Heavy Duty SLOW-GOmodules come in 1 metre and 1/2 metre lengths.

Only 55mm high – Heavy Duty SLOW-GO has a uniquediagonal striped pattern creating the illusion of appearing higher than it actually is, ensuring superior traffic control.

Simple and inexpensive to install – Comes completewith fixings suitable for asphalt or concrete. Uses 8 fixings per 1 metre module.

Safety yellow tapered end caps – Clearly delineatesthe speed hump for additional safety.

Anti-rust and corrosion resistant – A combination oftechnologically advanced polyurethane and epoxy coatings are used to ensure durability and maximum life.

HEAVY DUTY SLOW-GO Speed Control System

SPECIFICATIONS

Height: – 55mmWidth: – 485mm

Length: – 1000mm(500mm)

120140

55

140

185

1000

(500)

185

485

POLITE ENTERPRISES CORPORATION

Victoria274 Wolseley Place, Thomastown

VIC 3074T: 03 9462 7400 | F: 03 9462 7411

E:[email protected]

New South Wales Australian Capital Territory

8/28 Garling Rd, Kings Park NSW 2148 T: 02 9831 2855 | F: 02 9831

2822E:[email protected]

Queensland3972 Pacific Highway, Loganholme QLD

4129T: 07 3387 0160 | F: 07 3387 0159

E:[email protected]

South Australia, Western AustraliaNorthern Territory, Tasmania

T: 1800 069 784E:[email protected]

Fixing 003

Fixing 005