polim-c n 1hc0075874 ae en · 2019. 1. 14. · surge arrester polim-c..n 3 housing continuous...

DATA S H E E T

— Surge arrester POLIM-C..N

Technical data

Classification according to IEC 60099-4

Arrester class SL, Station Low

Line discharge class (LD) 2

Nominal discharge current In (8/20 µs) 10 kApeak

Repetitive charge transfer rating Qrs 1.6 As (C)

Rated thermal energy

Wth at Tamb = 40 °C 5.0 kJ/kV (Ur) = 6.25 kJ/kV (Uc)

Wth at Tamb = 55 °C 4.5 kJ/kV (Ur) = 5.625 kJ/kV (Uc)

High current impulse Ihc (4/10 µs) 100 kApeak

Long duration current impulse 550 A for 2000 µs

Short circuit rating Is 20 kArms for 0.2 s

Power frequency voltage versus time characteristics (TOV)

With no prior duty energy input

UTOV at t = 1 s 1.155 Ur = 1.444 Uc

UTOV at t = 3 s 1.130 Ur = 1.412 Uc

UTOV at t = 10 s 1.089 Ur = 1.361 Uc

With prior duty energy input of 4.5 kJ/kV (Ur) = 5.625 kJ/kV (Uc)

UTOV at t = 1 s 1.101 Ur = 1.376 Uc

UTOV at t = 3 s 1.075 Ur = 1.343 Uc

UTOV at t = 10 s 1.049 Ur = 1.312 Uc

Service conditions

Ambient air temperature Tamb −60 to +55 °C (for temperatures up to 80 °C consider instructions of application guidelines)

Altitude of installation up to 1800 m (for higher altitudes contact ABB)

Frequency of system voltage 15 to 62 Hz

Product description:• Metal-oxide (MO) surge arrester without spark gap,

designed and type tested according to IEC 60099-4, with own ABB metal-oxide resistors since more than 30 years

• Direct molded silicone housing in patented loop design for best environmental robustness

• 100% in-house production – fully in charge of complete process

• High quality, safe and reliable, maintenance free • For alternating current (AC) systems• For indoor and outdoor installations

Especially recommended for overvoltage protection of:• Rotating machine• Cable sheath• Components of secondary equipment• Power electronics, converter• Further MV distribution equipment

Additional certification:• Fire and smoke behavior tested and classified

according to EN 45545-2

Mechanical loads

Torque 50 Nm

Tensile strength axial 1000 N

Short term load SSL perpendicular to axis 350 Nm

Long term load SLL perpendicular to axis 245 Nm

2Surge arrester | POLIM-C..N

Electrical data

Rated voltage

Continuous operating voltage

Residual voltage Ures at specified impulse current (Maximum value)

Steep current impulse wave 1/…µs

Lightning current impulse wave 8/20 µs

Switching current impulse wave 30/60 µs

Ur Uc 5 kA 10 kA 1 kA 2.5 kA 5 kA ln=10 kA 20 kA 125 A 250 A 500 A

kVrms kVrms kVpeak kVpeak kVpeak kVpeak kVpeak kVpeak kVpeak kVpeak kVpeak kVpeak

0.55 0.44 1.65 1.76 1.36 1.44 1.52 1.60 1.83 1.20 1.24 1.28

0.83 0.66 2.48 2.64 2.04 2.16 2.27 2.40 2.74 1.79 1.85 1.92

1.13 0.9 3.2 3.5 2.7 2.8 3.0 3.1 3.6 2.4 2.4 2.5

1.25 1.0 3.7 3.9 3.0 3.2 3.4 3.5 4.0 2.7 2.7 2.8

1.63 1.3 4.7 5.0 3.9 4.1 4.3 4.5 5.2 3.4 3.5 3.6

1.88 1.5 5.4 5.8 4.5 4.7 5.0 5.2 6.0 3.9 4.1 4.2

2.00 1.6 5.7 6.1 4.7 5.0 5.2 5.5 6.3 4.1 4.3 4.4

2.25 1.8 6.4 6.9 5.3 5.6 5.9 6.2 7.1 4.7 4.8 5.0

2.50 2.0 7.2 7.6 5.9 6.3 6.6 6.9 7.9 5.2 5.4 5.6

2.75 2.2 7.9 8.4 6.5 6.9 7.2 7.6 8.7 5.7 5.9 6.1

3.13 2.5 8.9 9.5 7.4 7.8 8.2 8.6 9.9 6.5 6.7 6.9

3.75 3.0 10.7 11.4 8.8 9.3 9.8 10.3 11.8 7.7 8.0 8.3

4.50 3.6 12.8 13.7 10.6 11.2 11.8 12.4 14.2 9.3 9.6 10.0

5.00 4.0 14.3 15.2 11.8 12.5 13.1 13.8 15.8 10.3 10.7 11.1

6.00 4.8 17.0 18.2 14.1 14.9 15.6 16.5 18.9 12.3 12.8 13.2

6.25 5.0 17.8 19.0 14.7 15.5 16.3 17.2 19.7 12.9 13.3 13.8

6.88 5.5 19.5 20.8 16.1 17.1 17.9 18.9 21.6 14.1 14.6 15.2

7.50 6.0 21.3 22.7 17.6 18.6 19.5 20.6 23.5 15.4 15.9 16.5

7.88 6.3 22.4 23.9 18.5 19.6 20.5 21.7 24.8 16.2 16.8 17.4

8.25 6.6 23.4 25.0 19.3 20.5 21.5 22.7 25.9 17.0 17.5 18.2

8.75 7.0 24.9 26.6 20.5 21.7 22.8 24.1 27.5 18.0 18.6 19.3

9.00 7.2 25.5 27.2 21.0 22.3 23.4 24.7 28.2 18.5 19.1 19.8

9.38 7.5 26.6 28.4 22.0 23.3 24.4 25.8 29.5 19.3 19.9 20.7


Housing

Continuous operating voltage

Creepage distance

Flashover distance

Recommended clearances

Height H Weight Insulation withstand voltage of housing

1.2/50 µs 50 Hz, 60 s, wet

required values acc. to EN/IEC

guaranteed required values acc. to EN/IEC

guaranteed

Uc E F

kVrms mm mm mm mm kg kVpeak kVpeak kVrms kVrms

0.44 138 107 55 105 87.5 0.8 2.4 20 1 4.3

0.66 138 107 55 105 87.5 0.8 3.6 20 1.5 4.3

0.90 138 107 55 105 87.5 0.8 4.7 20 1.9 4.3

1.0 138 107 55 105 87.5 0.8 6 20 2.1 4.3

1.3 138 107 55 105 87.5 0.8 7 20 2.7 4.3

1.5 138 107 55 105 87.5 0.8 8 20 3.2 4.3

1.6 138 107 55 105 87.5 0.8 9 20 3.3 4.3

1.8 138 107 55 105 87.5 0.8 10 20 3.8 4.3

2.0 138 107 55 105 87.5 0.8 11 20 4.2 4.3

2.2 199 134 55 105 115 1.1 12 30 4.6 10.7

2.5 199 134 55 105 115 1.1 13 30 5.2 10.7

3.0 199 134 55 105 115 1.1 16 30 6.3 10.7

3.6 199 134 57 105 115 1.1 19 30 7.5 10.7

4.0 199 134 61 105 115 1.1 21 30 8.4 10.7

4.8 199 134 70 105 155 1.1 25 30 9.9 10.7

5.0 199 134 72 105 115 1.1 26 30 10.4 10.7

5.5 255 162 78 105 142.5 1.6 29 40 11.4 16.1

6.0 255 162 83 105 142.5 1.6 31 40 12.4 16.1

6.3 255 162 86 105 142.5 1.6 33 40 13.1 16.1

6.6 255 162 90 106 142.5 1.6 34 40 13.7 16.1

7.0 255 162 94 110 142.5 1.6 36 40 14.5 16.1

7.2 255 162 96 112 142.5 1.6 37 40 14.9 16.1

7.5 255 162 99 115 142.5 1.6 39 40 15.6 16.1


TOV Characteristics

Power frequency voltage-versus time characteristics (TOV) based on Ur

Power frequency voltage-versus time characteristics (TOV) based on Uc

• • • PGHV-A - 2017-01-30 C Copyright 2016 ABB, All rights reserved

0.80

0.85

0.90

0.95

1.00

1.05

1.10

1.15

1.20

1.25

0.1 1 10 100 1000 10000

T=

U TOV

/Ur

t / s

Surge Arrester Type MWK & MWDPower frequency voltage-versus time characteristics (TOV) based on rated voltage Ur

- Tests carried out on thermal prorated sections - samples preheated to 60°C -

without prior duty energy input with prior duty 4.5kJ/kV (Ur) = 5.625kJ/kV (Uc) energy input

• • • PGHV-A - 2017-01-30 C Copyright 2017 ABB, All rights reserved

1.00

1.10

1.20

1.30

1.40

1.50

1.60

0.1 1 10 100 1000 10000T

=U TO

V/U

c

t / s

Surge Arrester Type MWK & MWDPower frequency voltage-versus time characteristics (TOV) based on continuous voltage Uc

- Tests carried out on thermal prorated sections - samples preheated to 60°C -

without prior duty energy input with prior duty 4.5kJ/kV (Ur) = 5.625kJ/kV (Uc) energy input without prior duty energy input with prior duty 4.5 kJ/kV (Ur) = 5.625 kJ/kV (Uc) energy input

Samples preheated to 60 °C

without prior duty energy input with prior duty 4.5 kJ/kV (Ur) = 5.625 kJ/kV (Uc) energy input

Samples preheated to 60 °C


Dimensions

1 2 3 4

A

B

C

D

E

CR

EO

Par

amet

ric D

raw

ing

Dra

win

g sh

eet I

SO

545

7 - A

4T -

TBL

- Sca

le 1

:2

FThe information contained in this document has to be kept confidential. Any unauthorized use, reproduction, distribution ordisclosure to third parties is strictly forbidden. ABB reserves allrights regarding Intellectual Property Rights. A2GHV050818Copyright © 2018 ABB Switzerland Ltd

1(1)enPageLang.Rev.Sub.Doc. id.

mmPOLIM-CPGHV/CH/TC/SAR Drawing Unit

POLIM-CIssued by Document kind

In WorkP.DubachTitleSet bySet onStatePrepared by

1023

2000

Dimensions (mm)

Standard dimensions without accessories (may be subject to changes)

Dimensions according to outline drawing 1HC0011755 Outline drawings with accessories on request

2015-12-03 S.Ivanovic

2015-12-03 P.Dubach

Type of surge arrester Uc = Continuous operating voltage Housing

Type of top accessory (optional) Type of bottom accessory (optional)

POLIM-C 6.6 N / 1023 / 2000

Structure of type designation with optional accessories (Example)


Common Top Accessories (optional)

Type 1002 Clamp type connector (stainless steel)

Dimensions (mm)

Type 1023 Threated stud with nuts M12x80 (stainless steel)


1 2 3 4

A

B

C

D

E

CR

EO

Par

amet

ric D

raw

ing

Dra

win

g sh

eet I

SO

545

7 - A

4T -

TBL

- Sca

le 1

:1

FThe information contained in this document has to be kept confidential. Any unauthorized use, reproduction, distribution ordisclosure to third parties is strictly forbidden. ABB reserves allrights regarding Intellectual Property Rights.

M12

60

A2GHV050391Copyright © 2018 ABB Switzerland Ltd 2(2)en,de

PageLang.Rev.Sub.Doc. id.mmANSCHLUSS M12 / 1028PGHV/CH/TC/SAR Drawing

UnitCONNECTION M12 / 1028

Issued by Document kindReleasedM.Staubli

TitleSet bySet onStatePrepared by

1 2 3 4

A

B

C

D

E

CR

EO

Par

amet

ric D

raw

ing

Dra

win

g sh

eet I

SO

545

7 - A

4T -

TBL

- Sca

le 1

:1


M12

60






1 2 3 4

A

B

C

D

E

CR

EO

Par

amet

ric D

raw

ing

Dra

win

g sh

eet I

SO

545

7 - A

4T -

TBL

- Sca

le 1

:1


M12

60







Common Bottom Accessories (optional)

Type 2020 Clamp type connector (stainless steel)

Dimensions (mm)


Copyright© 2018 ABBAll rights reserved

For more information please contact:

ABB Switzerland Ltd.High Voltage ProductsSurge ArrestersJurastrasse 45CH-5430 WettingenPhone: +41 58 585 29 11Telefax: +41 58 585 55 70E-Mail: [email protected]

www.abb.com/arrestersonline

For detailed information for dimensioning of our products see following ABB documents:

• Application guidelines Overvoltage protection Metal oxide surge arresters in medium voltage systems

• Application guidelines Overvoltage protection Metal oxide surge arresters in railway facilities

For pdf or print version please send E-mail to: [email protected]

NoteWe reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders the agreed particulars shall prevail. ABB does not accept any responsibility whatsoever for potential errors or possible lack of information in this document. We reserve all rights in this document and in the subject matter and illustrations contained therein. Any reproduction, disclosure to third parties or utilization of its contents – in whole or in parts – is forbidden without prior written consent of ABB.

Our products are certified according ISO 9001, 14001, 18001 and IRIS

1HC

00

7587

4 EN

AE

polim-c n 1hc0075874 ae en · 2019. 1. 14. · surge arrester polim-c..n 3 housing continuous...

Documents