pneutrainer e

8/16/2019 Pneutrainer e

1/24

PNEUTRAINER-200Pneumatics-Electropneumatics

INTERNATIONAL TRAINING


2/24

An International company

Pneutrainer - 200

Educational and technological innovation at the service of training in pneumatics andelectropneumatics has created the PNEUTRAINER-200 system.6 standard compositions have been defined to cover the demand for training at the various levels.However, the system's modularity and flexibility allow us to adapt to the specifications andrequirements of each customer.

The standard compositions as defined allow scope for development of the following CAPACITIESwithin pneumatics and electropneumatics.


3/24

PNEU - 205 PNEUMATICS - ELECTROPNEUMATICS

- Set of objectives set out in PNEU - 201 and PNEU - 203

PNEU - 206 PROPORTIONAL PNEUMATICS- Adjustment of pressure and positioning- Analysis of closed-loop control systems- Adjustment concepts using PID adjustment devices- Assembly and tuning of servo-control systems- Adjustment of the tuning of regulation parameters

3

PNEU - 201 BASIC PNEUMATICS- Identification and use of pneumatic symbology- Concepts of air treatment- Function of pneumatic equipment

- Analysis of simple pneumatic circuits- Maintenance of pneumatic circuits- Design of simple pneumatic circuits

PNEU - 202 ADVANCED PNEUMATICS- Advanced control of pneumatic circuits- Vacuum technique. Applications- Breakdown diagnosis and repairs in complex pneumatic circuits.- Logic and sequential circuits analysis and design.

PNEUTRAINER-200

PNEU - 203 BASIC ELECTROPNEUMATICS- Concepts and principles of electricity and pneumatic systems.- Identification and use of symbology.- Analysis and design of sequential circuits based on relays.- Analysis and design of circuits using proximity pick-ups.

PNEU - 204 ADVANCED ELECTROPNEUMATICS- Analysis and design of sequential circuits with various detectors- PNEUALPHA programming- Programmed control of pneumatic circuits- Breakdown diagnosis and repair in electropneumatic circuits


4/24

Mounting panels - Complements

4

Based on an anodized extruded aluminium structure, we can offer a number of solutionsfor panels to carry out the practical activities proposed for the various configurations.

Ref. SAI 2068Schematic clip device

Ref. SAI 2080Horizontal mounting panel

.External dimensions: 700 x 560 x 25mm. It is supported on non-slip legs.Can be converted into a vertical panel using a support bracket set (see bellow). * Other dimensions available on request

( Option A ) HORIZONTAL MOUNTING PANEL

Ref. SAI 2064

Vertical mounting panel

* Other dimensions available on request

External dimensions: 1150x760x25 mm.*Allows work to be carried out on both sides.

The entire rolling frame system may be disassembled for transportation.External dimensions of the panel: 1150x760x25 mm.It has a postformed top for horizontal work, 1200x 800 mm.The lower section features a 1200x600 mm metal shelf containing the component storagedrawers block, the silent compressor, etc.4-wheel support, with brake and high loading output.

Total dimensions: 1700x1200x800mm (dxlxw).Designed for electrical power supply and compressed air connections.

Ref. SAI 2065Rolling table

.....

.

.Support bracket setRef. SAI 2028

• With non-slip legs, allowing the user to convert the horizontal mounting panel into a vertical panel.

Storage drawer blocks for rolling table

• Compact 4-drawer block with slide guides to house the trays for components.• Postformed material with ergonomically-designed pull devices.• External dimensions: 500x460x640 mm (dxlxw)

Ref. SAI 2066: without lock / Ref. SAI2074: with lock

Ref. SAI 2089

Cable-holder fitting

.This allows orderly storage of connection cables.

Silent compressorRef. SAI 2088

Model ICO-P50Two-phase power supply: 230V.Flow rate: 50 l/minMaximum pressure: 8 barLow noise level : 40 dBReboiler : 9 lWeight: 21Kg

* Other models available on request

.......Allows schematics to be attached inDIN-A4 format on the panel.

.

( Option B ) VERTICAL MOUNTING PANEL FOR 2 WORK POSTS

( Option C ) ROLLING TABLE WITH TWIN-POST PANEL

TERNATIONAL TRAINING


5/24

5PNEUTRAINER-200

Pneutrainer-200 components

All components used are high quality, developed and manufactured by SMC and used extensivelyall over the world. They are mounted on a stainless steel support plate 4 mm thick.The system used for attachment to the mounting panel is a specific design based on POM material,a state-of-the-art self-lubricating polymer which can withstand deformations, wear and ageing.

An identification label with standard symbology and references for easy identification.The pneumatic components include one-touch fittings for 4mm. pipe. The electropneumaticcomponents include cables for snap connection.When separate orders are placed, these are presented in a separate box with an external label for identificationpurposes.

If standard options are supplied, a storage system is included in EUROBOXES with thermoformedtrays for easy identification and storage using minimum space.


6/24

6

• Consisting of a filter, a regulator, and a 10-bar pressure gauge.• 5-micron filtering.• Possibility of vertical and horizontal positioning.

Air preparation

• 5-micron filtering.• Includes a 3/2 discharge valve for connection and disconnection of the rest of the circuit.• Possibility of vertical and horizontal positioning.

Air cleaning unit with 3/2 distribution valve

Ref. SAI 2091

• Consisting of filter, regulator, lubricator and 10-bar pressure gauge.• 5-micron filtering.• Possibility of vertical and horizontal positioning.

Air cleaning unit with lubricator

Ref. SAI 2001

Ref. SAI 2092

Distribution block

• Includes 8-outlet distribution block, one-touch fittings and non-return system.• Direct coupling to the maintenance unit.

Ref. SAI 2002Distribution block with 3/2 distribution valve

• 8-outlet distribution block, one-touch fittings and non-return system.

• Includes slide discharge valve with silencer.• Direct coupling to the maintenance unit.

Ref. SAI 2032

Pressure regulator withpressure gauge

Ref. SAI 2005• Operating pressure 0-10 bar.• Includes double-scale pressure gauge, (bar and psi).

10-bar pressure gauge

• With double-entry and double scale, (0-10 bar/ 0-140 psi).Ref. SAI 2004

Ref. SAI 2093

2.5-bar pressure gauge

• With double entry and a double scale, (0-2.5 bar/ 0-35 psi).

Ref. SAI 2094

Vacuum pressure gauge

• Pressure range (-1 bar : 0 bar). Double scale.

Soft start-up valve

• Includes a valve which allows pressure to be implemented gradually.

Ref. SAI 2090Air cleaning unit



7/24

7PNEUTRAINER-200

Manual and mechanicaloperated valves

Ref. SAI 2017

Double 3/2 valve, normally closed, operated by a push-button

Ref. SAI 2015

3/2 valve, normally closed, operated by push-button

• Grade-level push-button, normally in closed position, spring-return.

Ref. SAI 2018

• Includes a 3/2 port valve, which the user can convert from normally-opento normally-closed, as required.• Black grade-level push-button with spring return action.

3/2 normally closed-normally open valve,operated by a push-button

Ref. SAI 2019

3/2 valve, normally closed, operated by an emergency knob

• Driven by approved emergency-type knob. Spring-return action.

Ref. SAI 2108

3/2 normally closed-normally open valve,operated by a knob

• Includes a 3/2 port valve, which the user can convert from normally-opento normally-closed, as required.• Approved emergency knob with spring-return action.

Ref. SAI 2016

3/2 double valve, normally closed.Switch

• Includes 3/2 port valve with locking system.

FC 3/2 valve, normally closed. Roller lever.

Ref. SAI 2013

• Mechanical roller action.

• Includes two 3/2 port grade level push-buttons with red and black colour action.Spring-return.

Ref. SAI 2014

FC 3/2 valve, normally closed.One-way roller lever

• One-way roller lever.


8/24

8

3/2 valve. Toggle lever

Ref. SAI 2022

• 3/2 valve with lever and locking action.

Ref. SAI 2109

5/2 valve driven by push-button

• Flush push-button normally closed with spring-return

Ref. SAI 2067

5/2 lever-operated valve

• Lever-operated.

Ref. SAI 2025

5/3 valve with selector

• 5/3 closed-centre type valve.

The system for attachment to the mounting panelmay effect a positional change to allow the userto work transversally instead of longitudinally, inthe case of cylinders and also ends of stroke.

.POSSIBILITY OF MOUNTING AT 90º

Ref. SAI 2021

5/2 with 2-position selector

• Power-assisted valve driven by a locking switch.

Ref. SAI 2110

5/2 valve operated by mushroom push-button

• Activated by approved emergency knob. Spring-return action.



9/24

PNEUTRAINER-200

PNEUTRAINER-200Flexibility:We integrate any component

in the system at the request of thecustomer

Ref. SAI 2010

3/2 timer valve, normallyclosed. Convertible

• Basic timer, convertible from normally-closed to normally-open.• Timing range, 0 to 5 seconds

Ref. SAI 2023

• Spring-return pneumatic pilot valve.• Possibility of manual operation.

5/2 single valve. Airoperated

Ref. SAI 2024

• Double piloting with memory function.• Possibility of manual operation.

Air operated 5/2 double valve

3/2 single valve, normally closedAir operated

Ref. SAI 2020• Spring-return pneumatic pilot valve.• Possibility of manual operation.

Air operatedvalves

Ref. SAI 2107

Block of 2 x 5/2 double valves + 1 x5/2 single valve

• Three valves mounted on a stainless steel plate with a system forattachment to the panel and ISO symbology.• Possibility of manual operation.

9


10/24

10

Flow control

Ref. SAI 2006

“AND” Function

• Includes single-simultaneous valve with “AND” logic function.

equipment

Ref. SAI 2007“OR” Function

• Includes a single circuit selector with “OR” logic function.

Ref. SAI 2124

Double "OR" valve

• Includes double circuit selector with “OR” logic function .

Ref. SAI 2031• Includes two single direction speed controllers, operated manually.

Single direction speed controller (double)

Ref. SAI 2125

Double "AND" Function

• Includes double simultaneous valve with “AND” logic function .

Quick exhaust valve

Ref. SAI 2033• Includes a free exhaust valve with silencer.

Ref. SAI 2008

Check valve

Speed controller with controlled check valve

Ref SAI 2126• Integrated controlled non-return valve and speed controller.• Allows temporary intermediate lock-out and speed control.

Ref SAI 2030

Two-direction speed controller forsingle acting cylinder

• Includes a two-direction speed controller for single acting cylinders.



11/2411PNEUTRAINER-200

Actuators

Single acting cylinder

Ref. SAI 2027• Rod normally retracted.• Stainless steel construction. Diameter 20 mm. Stroke 50 mm.• Rubber cushion.

Ref. SAI 2026

Double acting cylinder with rubber cushion

• Stainless steel construction. Exterior diameter 20 mm. Stroke 100 mm.• Rubber cushion.• Rail to house end-of-stroke auto switches.

Ref. SAI 2071

Double acting cylinder with adjustable air cushion

• Stainless steel construction. Diameter 20 mm. Stroke 100 mm.• Adjustable air cushion with built-in magnetic detection and rail.

Ref. SAI 2117

Magnetically coupled rodless cylinder

• Stainless steel construction. Outside diameter 20 mm. Stroke 100 mm.• Magnetic coupling with high holding force.• Speed 50 to 400mm/second

Ref. SAI 2118

Magnetically coupled rodless cylinder

.

• Stainless steel construction. Outside diameter 20 mm.• Stroke: 100 mm. mechanically-driven• Speed, 100 to 150 mm/second• Possibility of mounting detectors on either side of the casing

Ref. SAI 2120

Stroke reading cylinder

• Diameter 20mm, stroke 50mm.• Resolution: 0.1mm• Measurement available for entire length of stroke.• Direct connection to CEU1 counter• Possibility of PLC connection.

* Counter not included

• Stainless steel construction. Stroke 100mm.• Rod with 4 support points on friction bushing.• Speed 50 to 500 mm/s• Rubber cushion.

Dual rod cylinder

Ref. SAI 2119

• Counter with 3 preselection points• 5-digit LCD with rear lighting.• Power supply 12 Vdc.• PNP control output, open collector.• Maximum count speed: 20 Khz.

Pulse counter for reading cylinder

Ref. SAI 2121

• Linear cylinder and rotating actuator combined with vacuum pad terminal.• Linear and rotating movement, independent or simultaneous.• Diameter 32mm, and stroke 25 mm.• Angle of rotation: 180˚

Ref. SAI 2122

Linear / rotary actuator with vacuum pad

Cylinder with load

Ref. SAI 2123 • Two cylinders, one actuator and another as a load.• Bore 16 and 20 mm, stroke 50mm.• Using flow regulators the load applied can be varied.


12/24

12

Various, Pneumatics

Vacuum ejector with pad

Ref. SAI 2029

• The unit has a vacuum ejector with pad, diameter 40mm.• Built-in silencer.

• Includes a red optical gauge with a display angle of 180˚

Ref. SAI 2003

Pressure indicator

Ref. SAI 2127

Pressure vessel

• Pneumatic capacity: 400 ml• One-touch fittings for 4 mm tube.

• Pneumatic counter with preselection and reset facility.• Automatic or manual preselection.• Pneumatic signal once the amount of pulses selected has been reached.

Ref. SAI 2012

Pneumatic counter

Ref. SAI 2011Pneumatic sequence controller

• Pneumatic sequence controller module, in four stages,including the "AND" and "OR" functions required.

NTERNATIONAL TRAINING


13/2413PNEUTRAINER-200

Solenoid valves

Ref. SAI 2050

3/2 single solenoid valve, normally closed

• Low consumption: 0.55W• LED display and surge absorber.• Spring and air reset.• Normally closed.• Power-assisted system.

Ref. SAI 2051

3/2 single solenoid valve, normally open

• Low consumption: 0.55W• LED display and surge absorber.• Spring and air reset.• Normally open.• Power-assisted system.

Ref. SAI 21113/2 double solenoid valve

• Low consumption: 0.55W• LED display and surge absorber.• Spring and air reset.• Power-assisted system.


Ref. SAI 2052

5/2 single solenoid valve


Ref. SAI 2053

5/2 double solenoid valve

Ref. SAI 2054

5/3 closed-centre solenoid valve

• Low consumption: 0.55W• LED display and surge absorber.• 3 spring centring positions.• Power-assisted system.• Flow restrictors with silencer.• One-touch fittings for 4 mm tube.

Ref. SAI 2113• Low consumption: 0.55W• LED display and surge absorber.• Three positions with spring centring.• Power-assisted system.• Flow restrictors with silencer.

5/3 solenoid valve, exhaust centres

Ref. SAI 2112 • Low consumption: 0.55W• LED display and surge absorber.• Three positions with spring centring.• Power-assisted system.• Flow restrictors with silencer.

5/3 solenoid pressure valve

Ref. SAI 2114• Low consumption: 0.55W• LED display and surge absorber.• Spring and air reset.• Power-assisted system.

Block of 2 solenoid valves, 5/2 double + 1 single


14/24

Detectors / Control modules

14

The Control Modules are mounted on an insulated box with a systemfor attatchment to the support panel and ISO serigraphy.

Ref. SAI 2035

ON/OFF switch

• 2 mm. terminals for use with snap connectors.• Includes selector drive with locking device.• Two independent contacts, normally open and normally closed.

Ref. SAI 2034

Emergency stop knob (electrical)

• 2 mm terminals for use with snap connectors.• Includes double contact, normally open and normally closed.

Ref. SAI 2038

Set of 3 relays

• Includes three relays with 24v coil and 4 switchable contacts.• Relay-active LED.• 2 mm. terminals for use with snap connection cables.

x 3

Ref. SAI 2037

Relay, 3 switched contacts

• Includes relay with 24 V coil and 4 switched contacts.• LED display of active relay.

Ref. SAI 2036

Set of electrical inputs (Buttonpad with 3 push-buttons)

• 2 mm. terminals for use with snap connectors.• Two push-buttons and a locking push-button.• Independent light indicator.• Two push-button switch contacts.

Ref. SAI 2056Power supply

• Input voltage: 220 V• Output: 24 V / 2 A• Protection against short circuits. Input switch and LED display.• Supply cable included.Ref. SAI 2139

• Version: 110/127V.

Ref. SAI 2039

Timed relay closure

• Includes disconnection timer relay.• LED display showing timer status.• Time programmable between 0.1 second and 1 hour.• 2 mm terminal for snap connection cabling.



15/24

15PNEUTRAINER-200

Indicators (Pilots, buzzer)

Ref. SAI 2047• Includes 8 pilot lights and a buzzer.• Supplementary nuts for power distribution.• 2 mm nuts for snap connection cables.

x 1x 8

• Operating voltage : 24 V.• Maximum current: 100 mA.• Includes LED display.

Ref. SAI 2043

Reed Auto Switch

Ref. SAI 2044• Includes M18 inductive detector.• Detection distance: 5 mm.• Status display LED.• Operating voltage: 24V.

Inductive detector

Ref. SAI 2049

Electrical Distributor

• It has 5 blocks of 10 x 10 mm. interconnected nuts.• This allows the user to carry out simple interconnections for complex ciruits ondifferent parts of the panel.

Ref. SAI 2040

Set of 2 timer relays

• Includes two timer relays, one for connection and the other for disconnection.• 24 V coil, with switch contact.• LED display of timer status.• Time programmable between 0.1 second and 1 hour.

x 2

Ref. SAI 2048Electric counter

• Includes inputs for counting and discounting.• Power supply: 24 V• Electromechanical preselection.• Manual or electrical reset.• Switch contact.• 2 mm nuts for snap connection cables.

Ref. SAI 2128

Solid state auto switch

• Operating voltage: less than 28 Vdc• Maximum current: 150 mA.• PNP output, open catch.• Includes LED display.


16/24

Ref. SAI 2129

PneuAlpha microPLC for panel

• PneuAlpha microPLC, model ECC-PNAL-10MR-D ( 6 inputs/ 4 relayoutputs).• Includes manual for programming software and instructions, and also amemory module and computer connection cable.• Power supply: 24Vdc

Detectors / Control modules

16

Ref. SAI 2046Capacitive detector

• Includes M18 capacitive detector• Detection distance: 8mm• Status display LED.• Operating voltage: 24V

Ref. SAI 2045

Photoelectric detector

• Includes M18 reflection photoelectric detector.• Detection distance: 100 mm.• Status display LED.• Operating voltage: 24V

Ref. SAI 2042

Electrical end of stroke

Includes roller-driven end of stroke with switchable electric contact.

Ref. SAI 2143

MicroPLC-287

• Module for table mounting or panel, including the PneuAlphaECC-PNAL-20MR-D controller (12 inputs and 4 outputs to relay).• Includes simulation of analog / digital inputs.• Includes 24v DC power supply.• Programming software and instructions manual.

• Power supply: 220v

• Allows adaptation of signals from the universal PLC trainer, for workto be carried out with the electropneumatic panel.• Input via sub-D connector and output via 2 mm nuts• Includes attachment features for mounting panel

Ref. SAI 2130

Interface module, inputs / outputs for panel

Ref. SAI 2131

Input / output simulation module

• Insulated case with components for attachment to the support panel.• Includes electromechanical switches for simulation of inputs andLED displays for simulation of outputs.• Connection by SUB-D connector or nuts• Totally compatible with PLC trainer and with PNEUTRAINER 200.



17/24

17PNEUTRAINER-200

P/V - V/P Converters

Ref. SAI 2097• Pressure indicator display of 3 1/2 digits.• Operation indicator gauge.• Adjustment of positive and vacuum pressure.• Power supply between 12 and 24 Vdc.• Double PNP output in open catch, plus analog output.

Programmable digital pressure switch. Analog / digital outputs

Ref. SAI 2098

Pressure gauge with electrical contact

• Pressure switch function included in a pressure gauge.• Pressure range: 0 to 10 bar.• Ideal for checking in-line pressure.

Ref. SAI 2095

Pressure switch, towards transistor

• PNP output with built-in LED display.• Operating voltage: 12-24 Vdc.

Programmable digital vacuum pressureswitch. Analog / digital outputs

Ref. SAI 2072• Operating voltage: 24V• Consumption: 45 mA• Pressure range: -1 to 10 bar.• Three numerical digits.• PNP output with snap connection cables.

Ref. SAI 2096

Vacuum pressure switch, towards transistor

• Pressure range adjustment 0-1 bar.• PNP output in open catch with LED display.• Operating voltage: 12-24 Vdc

Ref. SAI 2041

Electrical contact pressure switch

• Includes pneumatic-electrical converter.• 0-8 bar adjustable, with pressure indicator display.• Switchable contact.

Ref. SAI 2099

Programmable proportional electropneumatic transducer

• Proportional solenoid valve, adjustable pressure and programmable.• 3-digit display gauge.• Input code: 4-20 mA.• Analogic output signal: 1-5 V.


18/24

18

P/V - V/P Converters

Ref. SAI 2100

Proportional pressure valve

• Pressure adjustment in accordance with analog code.• Connectable to control amplification card.• Operating pressure; 0-10 bar.

Ref. SAI 2101

Proportional flow rate valve

• Pressure adjustment in accordance with analog code.• Connectable to control amplification card.• Operating pressure; 0-10 bar.

Ref. SAI 2102

Amplifier card for proportional valve

• Adjustment of ZERO and GAIN on the proportional valve.• Allows control of proportional valves by analog code, 0 to 5 Vdc.• Power supply 24 Vdc.

Amplification card with PID regulator

• Adjustment of ZERO and GAIN for the proportional valve.• Allows control of proportional valves by an analog signal, 0 to 5Vdc.• 24 Vdc power supply.• Includes anomaly-detection system and feed-back circuit for sensor.

Ref. SAI 2103

• Digital display of pressure for 7 types of units, 3-digit display.• Display of absolute pressure.• Programming of cut-off pressure.• Supply voltage: 12 to 24 Vdc.• Number of outlets: 2 channels x 2 outlets

Pressure switch / Digital Pressure Display for analog sensor

Ref. SAI 2105

Analog pressure sensor

• Pressure range: 0 to 10 bar.• Supply voltage: 12 to 24 Vdc.• Output: 1 to 5 Vdc.

Ref. SAI 2104



19/24

19PNEUTRAINER-200

Accessories

20+20 mts set 4 mm blue/white flexible tube

Ref. SAI 2057• Polyurethane tube, exterior diameter 4 mm, two-tone colour, forconnections on pneumatic circuits.

Ref. SAI 2059

Set of 5 plugs, 1/8”(KQP04)

• Includes a 5-plug set for pressure outputs of 1/8".

Ref. SAI 2132

Set of 10 "Y" fittings (KQT0400)

• Set of 10 one-touch fittings for 4 mm tubes.

Ref. TK-3

Tube-cutter

• Tool for clean cuts, perpendicular to the length of the tube.

Ref. SAI 2055

Set of connection cables

• Includes 50 x 2 mm. one-touch connection cables, with different colours and lengths.

Ref. SAI 2076 for PNEU-201Ref. SAI 2078 for PNEU-202Ref. SAI 2077 for PNEU-203Ref. SAI 2079 for PNEU-204Ref. SAI 2062 for PNEU-205

Boxes containing components

• Boxes in Eurobox format allow orderly storageof components.• Includes heat-formed polystyrene trays withidentification labels for housing of components toease their identification and control.• Allows extension of additional trays and boxes.

Ref. SAI 2133Ref. SAI 2134Ref. SAI 2135

Trays containing components

Ref. TG- 1

Tube-extractor

• Tool for an easy and quick extraction of the pipe (4 and 6 mm).

Ref. SAI 2058

Set of 10 tee fittings

• Set of 10 one-touch fittings for 4 mm tubes.

Ref. SAI 2060

Set of 10 x 4 mm plastic plugs

• Tool for plugging pressure outlets in 4 mm tube.


20/24

20

Teachware

SMC INTERNATIONAL TRAINING bases the designof its products on the model involving “Development of Competence”, and so, in addition to itshardware resources, our company offers a series of "Teachware" supplements for comprehensivetraining in these disciplines, in order to attain the SKILLS proposed.

Ref. SAI 2061

Set of manuals and documentation

• Consists of two files with the following information:• Unit specifications.• Operations manual.• Technical dossiers for all components.• Student dossiers with pneumatic-electropneumatic activities proposed.• Teacher's dossiers with solutions for the activities provided for the student.

Ref. SAI 2070

CD-ROM, Pneumatic slides

Includes a set of slides in "Power Point" format organised into variouschapters, which can be used as back-up for the teacher in theteaching-training process.

• Contains acetate transparencies with diagrams,

calculation table, etc., and also sectional pneumatic components.

Pneumatic overheads file

Ref.SAI 2073

Ref. SAI 2075

Case with pneumatic symbology

• Complete set of magnetic symbols for work on metal blackboard.• Manufactured in serigraph anodized aluminium.• Presentation in aluminium case.

Ref.SAI 2136

Pneumatic circuit simulation software

• Integrated package for design, and animation of electropneumatic circuits.• Total simulation of circuits.• Simple interactive edition.• Comprehensive, extendable libraries.• Animation of sectional components.

* Consult multi-license options for various work posts.

CD-ROM for computer-assisted teaching of Pneumatics/Electropneumatics

Ref. SAI 2137 Self-teaching CD-ROM courses.* Available in English.

NTERNATIONAL TRAINING


21/24

Standard compositionsPage Reference PNEU-206PNEU-205PNEU-204PNEU-203PNEU-202PNEU-201

SAI2080

SAI2064

SAI2065

MOUNTING PANELS

4

4

SAI2066

SAI2074

SAI2028SAI2088

SAI2068

SAI2089

21

OPTIONAL, TO BE SELECTED BY THE USER

AIR PREPARATION6

SAI2090

SAI2091SAI2001

SAI2092SAI2002

SAI2005SAI2004

SAI2093

SAI2094SAI2032

MECHANICAL-MANUALVALVES 7

SAI2015SAI2017SAI2018

SAI2019SAI2108

SAI2013

SAI2014

SAI2016

SAI2022

SAI2109


SAI2025

AIR OPERATEDVALVES 9

SAI2020

SAI2010

SAI2023SAI2024

SAI2107

FLOW CONTROLEQUIPMENT

10

SAI2007

SAI2124

SAI2006

SAI2125SAI2031

SAI2033

SAI2008

1 1 1 1 1 1

1 1 1 1 1 1

1 1 1 1 1

1 2 1 1 1

1

1

2 2 2

11 1 11 1 1

2 4 21 1 11 1 1

1

1 1 1

1

1 1 1

1 1 11 1 13 3 3

1

1 1 1

1 1 11 1 1

1

2 2 22 2

1

1 1

SAI2126SAI2030

2 2

1

PNEUTRAINER-200 COMPONENTS

COMPLEMENTARY ITEMS

OPTIONAL, TO BE SELECTED BY THE USER

SAI2089


22/24

Standard compositions

3 3 3

Page Reference PNEU-206PNEU-205PNEU-204PNEU-203PNEU-202PNEU-201

ACTUATORS 11

12VARIOUS, PNEUMATICS

SOLENOID VALVES13

DETECTORS/

CONTROL MODULES14

P/V-V/PCONVERTERS.PROPORTIONAL PNEUMATICS 17

SAI2027

SAI2118

SAI2119

SAI2120SAI2121

SAI2122

SAI2123

SAI2026

SAI2071SAI2117

1 1 1 1 12 2 2 2 2

1

1

1

1

1

1

SAI2029

SAI2003SAI2127

SAI2012

SAI2011

11

11 11

SAI2050


SAI2112

SAI2113SAI2114

SAI2053SAI2054

1 1 1

1

2 2 2

1

1

SAI2056

SAI2035

SAI2034

SAI2036

SAI2038


SAI2040

SAI2043

SAI2128

SAI2044SAI2046

SAI2045

SAI2130

SAI2131

SAI2129

SAI2042

SAI2049SAI2048

1 1 1 1

11

1 1 1

1 2 1

1 1 1

1

111 144 4

2111

22 2

SAI2041SAI2095

SAI2098


111

11

1 1

1

1

3 3 3

1

PNEUTRAINER-200 COMPONENTS

ERNATIONAL TRAINING


23/24

PNEU-202 includes all the components of the PNEU-201. To supplement an existing unit, carry out the subtraction.PNEU-204 includes all the components of the PNEU-203. To supplement an existing unit, carry out the subtraction.PNEU-205 is a synthesis composition of PNEU-201 and PNEU-203

23

Page Reference PNEU-206PNEU-205PNEU-204PNEU-203PNEU-202PNEU-201

17

19

20

1 1 1 1

SAI2099

SAI2102


SAI2101SAI2100

P/V-V/P CONVERTERS.PROPORTIONAL PNEUMATICS

1

1

1

SAI2057SAI2058

SAI2059SAI2060

SAI2055

SAI2076

SAI2078

SAI2077SAI2079

SAI2134

SAI2135

SAI2133SAI2062

TK-3

SAI2132

1

111

1

1

11111111

1111

1111

1 1

1111

11

11

1

1

SAI2073SAI2075

SAI2136

PNEUTRAINER-200

ACCESSORIES

TEACHING BACK-UP

•••

SAI2061 1111 1 1SAI2070 1111 1

SAI2137

TG-1 11111 1


24/24

www.smctraining.com


pneutrainer e

Documents