pneumatic conveying system
TRANSCRIPT
Pneumatic Conveying System
Sanitary Pneumatic Conveying
PNEUCON Process Technologies offers high quality pneumatic conveying systems and
equipment for the food, pharmaceutical, chemical and packaging industries.
o Dust free stainless or mild steel vacuum systems
o Dense phase vacuum systems for fragile and pre-mixed product
o Sophisticated controls
o Positive pressure lean phase systems
o Specialized powder handling for non free flowing products
o Turnkey systems
o Abrasion resistant systems
o High accuracy multi material weighers
o The P-Series filtered receivers are specially designed for use with powders and
friable materials in sanitary applications
Elements of a Vacuum Conveying System
From pick-up spike to piping to receivers and vacuum pumps, PNEUCON offers a wide range of
equipment for pneumatic conveying needs, whether for automated refill of feeding systems or as
standalone conveying applications. The following list describes the varied elements available
from PNEUCON for building a complete conveying system for loss-in-weight feeder refill
(pictured in the diagram above).
Material Pick-up
From simple suction wands for free flowing materials to fully fluidized feed bins (1), silo pick-
up pots (2) or bag dump stations (3) with prefeeders for powders, Premier offers a wide variety
of equipment to ensure reliable material pick-up into the conveying air.
Conveying Line
Connect one or multiple material picks up stations to a vacuum receiver. To ensure blockage-free
conveying, diverter valves (4) and line clearance valves (5) are available in addition to the
piping.
Vacuum Receivers
Various models of central (7) and self-contained receivers are available to separate the material
from the conveying air stream, alternating between suction and discharge modes of operation.
Sequence & Vent Valves
Sequence & vent valves (8) allow the air stream to bypass and vent the vacuum receiver during
the discharge cycle.
Pump Packages
Vacuum pump packages include the pump -- regenerative blower (9), sliding vane or rotary lobe
blower (10) -- to produce the air stream as well a bypass valve (11) to allow the pump to run
while no receiver is conveying and a secondary filter (12) to protect the vacuum pump from
entrance of foreign bodies.
Controls
HCU/HSU control and operator interface are available to control a single central or self-
contained unit. To control the sequence of a multi-component system PLC controls (13) are
available which are programmed to suit the client’s process. Siemens, Mitsubishi and Allen
Bradley PLC controls are available.
Central Vacuum System
A central vacuum system has the ability to do the work of a dozen of smaller, individual
cleaners. This central vacuum system aims to keep the entire industrial plan dust free and even
getting rid of the dust and other dirt items.
The central vacuum system consists of a large media dust collector, like a cartridge or a bag
house which has an inertial separator which can be used as a pre-sorter. The main advantage of
this pre-sorter is that it helps to remove the large chips and then with the help of the media
filtration, the fine particles can be removed.