ply - buildnz...nuratrim – a smart way to provide a sharp edge ﬁnish where the nuraply must lap...

B E N E F I T S

BUILDING CODE VERIFICATION

CodeMark is a product certification system administered by the Ministry of Business Innovation and Employment (MBIE) which must be accepted by Councils so long as the product or system is designed and used within the scope of the CodeMark certificate.

BRANZ has appraised the Nuraply 3PM system and have concluded that it complies with NZBC E2 – weathertightness and B2 – durability.

We are happy to work with clients on any building consent issues, especially if something outside the scope of usual work is planned.

WARRANTY

Nuralite warrants Nuraply 3PM against materials defects for 20 years from the date of installation. The warranty must be applied for at the completion of the job. For this extended warranty to remain current the customer must maintain the roof and have it inspected every five years by a qualified Nuralite applicator.

The workmanship is covered by a separate workmanship warranty issued by the applicator. Nuralite will inspect the completed job if requested.

New Zealand’s most specified multiply system, Nuraply 3PM is a robust, reinforced bituminous waterproofing sheet. Installed as two complete waterproofing layers for redundancy the completed system is commonly called “bulletproof”.The roof can be finished in a choice of five standard shades of mineral chip which give a textured finish to the roofs surface. The mineral chip surface provides a natural look while providing UV protection.

The first layer consists of 3mm thick Nuraply 3PB or 3PV which are laid with heat welded lap joints. The cap sheet is 4mm thick polymer modified bitumen with a heavy reinforcing layer of non-woven polyester inside topped off with embedded mineral chips.

The Nuraply 3PM system is suitable for installing over plywood, concrete or Nuratherm insulated roof substrates. The Nuraply 3PM system is suitable for flat roofs or on decks protected from foot traffic by installing tiles or timber decks on Nurajacks.

0800 NURALITE www.nuralite.co.nz

Nuraply

BENEFITS:• 1 Degree Falls• Advanced Technology• 20 Year Warranty• Easy Installation• Double Layer Insurance• Cost Effective• 5 Colour Options• Bulletproof Waterproofing• Proven for NZ Conditions• BRANZ Appraised• CodeMark Certification


BCS - 151216 - CMNZ

S C O P E


THINGS TO CONSIDER

The substrate provides the foundation for a successful system. The two most common substrate problems are movement and ponding. To alleviate these, ensure when plywood is being used that:

• The treated plywood substrate is at least 17mm thick, 21mm on decks and supported at 600mm x 600mm. The plywood must be tightly butted and staggered or brick pattern laid. Stainless steel fixings and glue bonding must be used when using plywood.

• Falls are designed and constructed within our recommended guidelines. In accordance with Nuralite’s CodeMark, a flat roof in the Nuraply 3PM range must have a minimum constructed fall of 1:80. For design purposes, a recommended minimum 1:40 fall should be assumed for plywood substrates, 1:60 on concrete and metal tray substrates - see table on next page.

When laying Nuraply 3PM on concrete substrate ensure a clean surface, free from defects or grit. Cure time for concrete is a minimum of 28 days and needs to be set properly prior to membrane installation. Ensure concrete is graded to correct falls with a wood float finish incorporating fillets to upstands with has all sharp edges removed.

COLLECTION OF POTABLE WATERS

Nuraply 3PM membrane has been tested to NZS4040 as suitable for collecting potable water. A coating of Nuraglaze is recommended to keep the surface particularly clean. Nuralite recommends annual cleans to maintain the Nuraply surface.

D E TA I L


COMPONENTS

Nuratrim – a smart way to provide a sharp edge finish where the Nuraply must lap over the roof edge. Detailed to ensure watertightness. Available in anodised aluminium, or else can be powder coated or painted.

Nuravents – are unobtrusive but have a large capacity for air circulation. These are not required on Nuratherm Warm roofs.

Drains & Scuppers – Nuralite stocks a range of metal scuppers and drains. Alternative sized outlets can be fabricated on request.

Nurajacks – Nurajacks are a self-levelling pedestal with a large base that ensures no point loading of the membrane below. Suited to create a ‘floating deck’ over the Nuraply 3PM system for both tiles and timber. Nurajacks are height adjustable. They allow the tiles or decking to be raised up to the level of the interior living space. This creates a level threshold with optimum indoor- outdoor flow.

BASESHEET OPTIONS

Plywood - Nuraply 3PB or 3PBSA

Polymer modified bitumen membrane which is fully bonded to the substrate using Nurabond #10 adhesive.

Concrete - Nuraply 3PV or 3PVSA

Special ventilating grade membrane which allows substrate moisture and vapour to dissipate.

NuraplyNuraply

Nuraply

ANNIVERSARY

50YEARS

1966 2016

T E C H N I C A L I N F O


TECHNICAL INFORMATION

A comprehensive set of design details and specifitions are available at www.nuralite.co.nzNuralite technical advisors are all very experienced and willing to help either on the phone, in your office or on site. Call 09 579 2046 or 0800 Nuralite (0800 687254).

DESCRIPTION – NURAPLY 3PM

Waterproofing membrane consisting of straight run bitumen heavily modified with polymers and reinforced with non-woven polyester.

FINISHING

• Top surface finished with a dense mechanically rolled aggregate layer. Polyethylene film is on the 80mm lap joint strip. Aggregates are available in choice of colours – slate, charcoal, pure white, red or green. May be overcoated with Nuraglaze to maintain appearance.

• Underside finished with a smooth thermofusible film.

COMPOSITION

• Reinforcement: non-woven polyester 180 g/m2.

• Coating mass: plastomer bitumen, consisting of ±70 % bitumen and ±30% polymer modified bitumen.

Nuraply

WHEN YOU SHOULD NOT USE NURAPLY 3PM

Not for Green roofs or planter boxes – specify the Nuraply 3PG system and related drainage mat to ensure the plant roots will not attack the membrane and that there is proper drainage within the waterproofing system.

Not on decks where the Nuraply 3PM is likely to be directly exposed to foot traffic, or where it may be mechanically or chemically damaged. In these cases, ensure the Nuraply 3PM is completely protected by overlaying with tiles or timber on Nurajacks. On roofs, maintenance walkways can be formed with a sacrificial third layer of contrasting colour.

SUBSTRATE Plywood ConcreteExisting

NURALITE

Concretewith TaperedBoards or Flat

Enertherm

Recommended Design Fall (excluding gutters)

Comments

1:40

Using 17mm (roofs) or

21mm (decks)plywood,

rafters at 600 centers, nogs at 600 centers

Plywoodwith

Enertherm

NPM900Metal tray

withEnertherm

1:601:60

Confirm noponding areas

1:60 1:40 1:40

Create requiredslope with a screed. Wait for concrete

and screed to cure

Confirmsubstrateis sound

Nuraliteto assist

with taperedboard layout

Createrequired

slope in theplywood

Createrequired

slope in theNPM900

Nuraply

APPLICATORS

All Nuralite authorized applicators have been trained in Nuralite’s system followed by on-site monitoring. Most Nuralite applicators have been working with Nuralite systems for many years.

NURAPLY 3PM, NURAGLAZE AND NO.10 ARE NON-HAZARDOUS PRODUCTS. TO THE BEST OF OUR KNOWLEDGE, THE INFORMATION IN THIS BROCHURE IS ACCURATE AT THE TIME OF PRINTING. NURALITE WATERPROOFING LTD RESERVES THE RIGHT TO ALTER INFORMATION, FORMULATION OR PARAMETERS AT ANY TIME WITHOUT NOTICE.

MODERN MEMBRANE. The quality of modern Nuraply 3PM torch-on is the result of a sophisticated manufacturing process. (Showing colour option: Pure White)

Technical specifications (average values).

NURAPLY 3PM COLOUR OPTIONS

PURE WHITE SLATE CHARCOAL

RED* GREEN*

SUBSTRATE

CAPSHEET BASESHEET

NURAPLY 3PM NURAPLY 3PB 3PBSA

Plywood Concrete

Tensille Strength (U.E.A.t.c) L: 650 N T: 500 N L: 650 N T: 500 N L: 700 N T: 500 N

Elongation at Break (U.E.A.t.c) L: 40% T: 40% L: 40% T: 40% L: 35% T: 35%

Resistance to Heat (U.E.A.t.c) > 140°C > 140°C - - -

Low Temperature Flexiblility (U.E.A.t.c) -8°C -5°C -25°C - -25°C

Dimensional Stability ≤ 0.5% 0.5% - - -

DIMENSIONS

Thickness 4 mm 3 mm 2.5 mm

Length 7.5 m 10 m 10 m

Width 1 m 1 m 1 m

Surface 7.5 m2 10 m2 10 m2

Average Weight 43 kg 41 kg 32 kg

NURAPLY 3PV

L: 900 N T: 550 N

L: 45% T: 45%

3 mm

7.5 m

1 m

7.5 m2

32 kg

3PVSA

L: 700 N T: 500 N

L: 35% T: 35%

2.5 mm

10 m

1 m

10 m2

32 kg

PRODUCT

0800 NURALITE

D E TA I L



Appraisal No.547 [2014]

With CODEMARK Certification, Nuraply 3PM can be installed on substrates with falls as low as 1 degree.

GUARANTEE

Nuralite Waterproofing Ltd60 D Leon Leicester Ave, Mt Wellington, Auckland 1060, New ZealandP 09 579 2046 F 09 579 5136 E [email protected]

N O V E M B E R 2 0 1 7

N O V E M B E R 2 0 1 7

N O V E M B E R 2 0 1 7

N O V E M B E R 2 0 1 7

N O V E M B E R 2 0 1 7

*AVAILABLE ON ORDERMINIMUM QTYS APPLY

B E N E F I T S





WARRANTY







Nuraply



BCS - 151216 - CMNZ

S C O P E


THINGS TO CONSIDER






Nuraply 3PM membrane has been tested to NZS4040 as suitable for collecting potable water. A coating of Nuraglaze is recommended to keep the surface particularly clean. Fillers and fast flush divertorsshould be installed in accordance with Ministry of Health guidance. Nuralite recommends annual cleans to maintain the Nuraply surface.

D E TA I L


COMPONENTS





BASESHEET OPTIONS





Nuraply Nuraply

Nuraply

ANNIVERSARY

50YEARS

1966 2016







FINISHING



COMPOSITION



Nuraply





NURALITE


Enertherm


Comments

1:40




Plywoodwith

Enertherm

NPM900Metal tray

withEnertherm

1:601:60


1:60 1:40 1:40


and screed to cure


Nuraliteto assist


Createrequired

slope in theplywood

Createrequired

slope in theNPM900

Nuraply

APPLICATORS



MODERN MEMBRANE. The quality of modern Nuraply 3PM torch-on is the result of a sophisticated manufacturing process.




RED* GREEN*

SUBSTRATE

CAPSHEET BASESHEET


Plywood Concrete






DIMENSIONS



Width 1 m 1 m 1 m

Surface 7.5 m2 10 m2 10 m2


NURAPLY 3PV

L: 900 N T: 550 N

L: 45% T: 45%

3 mm

7.5 m

1 m

7.5 m2

32 kg

3PVSA

L: 700 N T: 500 N

L: 35% T: 35%

2.5 mm

10 m

1 m

10 m2

32 kg

PRODUCT

0800 NURALITE

D E TA I L





GUARANTEE


N O V E M B E R 2 0 1 7

N O V E M B E R 2 0 1 7

N O V E M B E R 2 0 1 7

N O V E M B E R 2 0 1 7

N O V E M B E R 2 0 1 7


B E N E F I T S





WARRANTY







Nuraply



BCS - 151216 - CMNZ

S C O P E


THINGS TO CONSIDER


• The treated plywood substrate is at least 17mmthick, 21mm on decks and supported at 600mm x 600mm. The plywood must be tightlybutted and staggered or brick pattern laid.Stainless steel fixings and glue bonding must beused when using plywood.

• Falls are designed and constructed within ourrecommended guidelines. In accordance withNuralite’s CodeMark, a flat roof in the Nuraply 3PMrange must have a minimum constructed fall of1:80. For design purposes, a recommendedminimum 1:40 fall should be assumed for plywoodsubstrates, 1:60 on concrete and metal traysubstrates - see table on next page.




D E TA I L


COMPONENTS





BASESHEET OPTIONS





NuraplyNuraply

Nuraply

ANNIVERSARY

50YEARS

1966 2016







FINISHING



COMPOSITION



NuraplyWHEN YOU SHOULD NOT USE NURAPLY 3PM




NURALITE


Enertherm


Comments

1:40




Plywoodwith

Enertherm

NPM900Metal tray

withEnertherm

1:601:60


1:60 1:40 1:40


and screed to cure


Nuraliteto assist


Createrequired

slope in theplywood

Createrequired

slope in theNPM900

Nuraply

APPLICATORS







RED* GREEN*

SUBSTRATE

CAPSHEET BASESHEET


Plywood Concrete






DIMENSIONS



Width 1 m 1 m 1 m

Surface 7.5 m2 10 m2 10 m2


NURAPLY 3PV

L: 900 N T: 550 N

L: 45% T: 45%

3 mm

7.5 m

1 m

7.5 m2

32 kg

3PVSA

L: 700 N T: 500 N

L: 35% T: 35%

2.5 mm

10 m

1 m

10 m2

32 kg

PRODUCT

0800 NURALITE

D E TA I L





GUARANTEE


N O V E M B E R 2 0 1 7

N O V E M B E R 2 0 1 7

N O V E M B E R 2 0 1 7

N O V E M B E R 2 0 1 7

N O V E M B E R 2 0 1 7


B E N E F I T S





WARRANTY







Nuraply



BCS - 151216 - CMNZ

S C O P E


THINGS TO CONSIDER







D E TA I L


COMPONENTS





NuraplyNuraply

Nuraply

ANNIVERSARY

50YEARS

1966 2016







FINISHING



COMPOSITION



Nuraply





NURALITE


Enertherm

Recommended Design Fall

Note: excluding gutters.

Comments

1:40




Plywoodwith

Enertherm

NPM900Metal tray

withEnertherm

1:60 1:60


1:60 1:40 1:40


and screed to cure


Nuraliteto assist


Createrequired

slope in theplywood

Createrequired

slope in theNPM900

Nuraply

BASESHEET OPTIONS



Concrete - Nuraply 3PV or 3PVSA Special ventilating grade membrane which allows substrate moisture and vapour to dissipate.COATINGS

Nuraglaze

Applying a coat of Nuraglaze at installation is an effective way to enhance the systems appearance. This is something to enhance the systems appearance. This is something to consider, especially with light coloured membrane.





SLATE CHARCOAL

RED* GREEN*

SUBSTRATE

CAPSHEET BASESHEET


Plywood Concrete






DIMENSIONS



Width 1 m 1 m 1 m

Surface 7.5 m2 10 m2 10 m2


NURAPLY 3PV

L: 900 N T: 550 N

L: 45% T: 45%

3 mm

7.5 m

1 m

7.5 m2

32 kg

3PVSA

L: 700 N T: 500 N

L: 35% T: 35%

2.5 mm

10 m

1 m

10 m2

32 kg

PRODUCT

0800 NURALITE

D E TA I L


WHITE SLATE CHARCOAL



GUARANTEE


N O V E M B E R 2 0 1 7

N O V E M B E R 2 0 1 7

N O V E M B E R 2 0 1 7

N O V E M B E R 2 0 1 7

N O V E M B E R 2 0 1 7


Minimum Finished Constructed Fall 1:80 1:80 1:80 1:80 1:80 1:80

• Top surface finished with a dense mechanically rolled aggregate layer. Polyethylene film is on the 80mm lap joint strip. Aggregates are available in choice of colours – slate, charcoal, white, red or green. May be overcoated with Nuraglaze to maintain appearance.



B E N E F I T S


CodeMark is a product certification systemadministered by the Ministry of Business Innovationand Employment (MBIE) which must be acceptedby Councils so long as the product or system isdesigned and used within the scope of theCodeMark certificate.

BRANZ has appraised the Nuraply 3PM system andhave concluded that it complies with NZBC E2 –weathertightness and B2 – durability.

We are happy to work with clients on any buildingconsent issues, especially if something outside thescope of usual work is planned.

WARRANTY

Nuralite warrants Nuraply 3PM against materialsdefects for 20 years from the date of installation.The warranty must be applied for at the completionof the job. For this extended warranty to remaincurrent the customer must maintain the roof andhave it inspected every five years by a qualifiedNuralite applicator.

The workmanship is covered by a separateworkmanship warranty issued by the applicator.Nuralite will inspect the completed job if requested.

New Zealand’s most specified multiply system, Nuraply 3PM is a robust,reinforced bituminous waterproofing sheet. Installed as two completewaterproofing layers for redundancy the completed system is commonlycalled “bulletproof”.The roof can be finished in a choice of five standard shades of mineral chip which give a textured finish to the roofs surface. The mineral chip surface provides a natural look while providing UV protection.

The first layer consists of 3mm thick Nuraply 3PB or 3PV which are laid with heat welded lap joints. The capsheet is 4mm thick polymer modified bitumen with a heavy reinforcing layer of non-woven polyester insidetopped off with embedded mineral chips.

The Nuraply 3PM system is suitable for installing over plywood, concrete or Nuratherm insulated roofsubstrates. The Nuraply 3PM system is suitable for flat roofs or on decks protected from foot traffic by installingtiles or timber decks on Nurajacks.


Nuraply



BCS - 151216 - CMNZ

S C O P E


THINGS TO CONSIDER

The substrate provides the foundation for asuccessful system. The two most common substrateproblems are movement and ponding. To alleviatethese, ensure when plywood is being used that:

• The treated plywood substrate is at least 17mm thick, 21mm on decks and supported at600mm x 600mm. The plywood must be tightly butted and staggered or brick pattern laid. Stainless steel fixings and glue bonding must be used when using plywood.


When laying Nuraply 3PM on concrete substrateensure a clean surface, free from defects or grit. Curetime for concrete is a minimum of 28 days and needsto be set properly prior to membrane installation.Ensure concrete is graded to correct falls with a woodfloat finish incorporating fillets to upstands with has allsharp edges removed.


Nuraply 3PM membrane has been tested to NZS4040as suitable for collecting potable water. A coating ofNuraglaze is recommended to keep the surfaceparticularly clean. And Nuralite recommends annualcleans to maintain the Nuraply surface.

D E TA I L


COMPONENTS

Nuratrim – a smart way to provide a sharp edgefinish where the Nuraply must lap over the roof edge.Detailed to ensure watertightness. Available inanodised aluminium, or else can be powder coatedor painted.

Nuravents – are unobtrusive but have a largecapacity for air circulation. These are not required onNuratherm Warm roofs.

Drains & Scuppers – Nuralite stocks a range of metalscuppers and drains. Alternative sized outlets can befabricated on request.

Nurajacks – Nurajacks are a self-levelling pedestalwith a large base that ensures no point loading of themembrane below. Suited to create a ‘floating deck’over the Nuraply 3PM system for both tiles andtimber. Nurajacks are height adjustable. They allowthe tiles or decking to be raised up to the level of theinterior living space. This creates a level thresholdwith optimum indoor- outdoor flow.

BASESHEET OPTIONS


Polymer modified bitumen membrane which is fullybonded to the substrate using Nurabond #10adhesive.



NuraplyNuraply

Nuraply

ANNIVERSARY

50YEARS

1966 2016







FINISHING

COMPOSITION



Nuraply

WHEN YOU SHOULD NOT USENURAPLY 3PM

Not for Green roofs or planter boxes – specifythe Nuraply 3PG system and related drainagemat to ensure the plant roots will not attack themembrane and that there is proper drainagewithin the waterproofing system.

Not on decks where the Nuraply 3PM is likelyto be directly exposed to foot traffic, or where itmay be mechanically or chemically damaged.In these cases, ensure the Nuraply 3PM iscompletely protected by overlaying of paversor on Nurajacks. On roofs, maintenancewalkways can be formed with a sacrificial thirdlayer of contrasting colour.


NURALITE


Enertherm


Comments

1:40




Plywoodwith

Enertherm

NPM900Metal tray

withEnertherm

1:601:60


1:60 1:40 1:40


and screed to cure


Nuraliteto assist


Createrequired

slope in theplywood

Createrequired

slope in theNPM900

APPLICATORS

All Nuralite authorized applicators have been trainedin Nuralite’s system followed by on-site monitoring.Most Nuralite applicators have been working withNuralite systems for many years.


MODERN MEMBRANE. The quality of modern Nuraply 3PM torch-on is the result of a sophisticatedmanufacturing process. (Showing colour option: Pure White)



RED* GREEN*

SUBSTRATE

CAPSHEET BASESHEET


Plywood Concrete






DIMENSIONS



Width 1 m 1 m 1 m

Surface 7.5 m2 10 m2 10 m2


NURAPLY 3PV

L: 900 N T: 550 N

L: 45% T: 45%

3 mm

7.5 m

1 m

7.5 m2

32 kg

3PVSA

L: 700 N T: 500 N

L: 35% T: 35%

2.5 mm

10 m

1 m

10 m2

32 kg

PRODUCT


With CODEMARK Certification, Nuraply 3PM can beinstalled on substrates with falls as low as 1 degree.

GUARANTEE


N O V E M B E R 2 0 1 7

N O V E M B E R 2 0 1 7

N O V E M B E R 2 0 1 7

N O V E M B E R 2 0 1 7

N O V E M B E R 2 0 1 7


ply - buildnz...nuratrim – a smart way to provide a sharp edge ﬁnish where the nuraply must lap...

Documents