plugs into cn61 on indoor pcb
DESCRIPTION
6. 5. 4. 3. 2. 1. Adaptor For Run/Fault Indication & Remote On/Off For VRF, DI & SDI( Part Number TRF ). 6. FAULT SIGNAL. For Run / Fault Indication. 5. COM (+12VDC). 6. 5. Plugs Into CN61 On indoor PCB. RUN SIGNAL. 4. 4. Local on/off prohibit. - PowerPoint PPT PresentationTRANSCRIPT
04/20/23
5
6
4Plugs
Into CN61On indoor PCB
Adaptor For Run/Fault Indication & Remote On/Off For VRF, DI & SDI( Part Number TRF )
6
5
4
3
2
1
Local on/off prohibit
RUN SIGNAL
COM (+12VDC)
FAULT SIGNAL
ON/Off Control1
3
5
4
2
6
Max 10m between indoor PCB and relay ( Field Supplied )
For Run / Fault Indication
COM (Volt Free)3
2
1
Used For Remote on/off (jumper 01 on master PCB must be cut – otherwise it responds to pulse) & local on/off control prohibit
NOTE: NOT FOR USE WITH RAV-SM-XT RANGE