MnDOT DISTRICT: 1, 2A, 2B

1.0 DEALER/DISTRIBUTOR INFO FOR THIS DISTRICT: ENTER YOUR RESPONSE BELOW

1.1 Authorized Dealer Name: Road Machinery & Supplies

1.2 Dealer Street Address 315 Hoover Rd N.

1.3 Dealer City / State / Zip Virginia, MN 55792

1.4 Dealer Point of Contact Name Brad Carlson

1.5 Dealer Point of Contact Phone 218-471-1065

1.6 Dealer Point of Contact Email bcarlson@rmseq.com

1.7

State the days and hours your company offers rental equipment Open hours Monday - Friday 7-5

1.8 Delivery Lead Time After Receipt of Order 48 hours

1.9 Price List Name, Date and/or ID Number 2017 Rental Catalog 2.22.17

1.10 Website Address www.rmsequipment.com

2.0 EQUIPMENT DESCRIPTION CATEGORY

LIST EXAMPLES OF EQUIPMENT OFFERED IN THIS CATEGORY

BELOW

PERCENT DISCOUNT (%)

OFF CURRENT RENTAL

CATALOGUE LIST PRICE

2.1 Truck and/or Truck Mounted Equipment (Ex: Aerial Man lift,

Cranes, Flat beds, Utility, Dump, Log Loader, Street Sweepers,

Hydro Seeder, Snow/Ice Equip.)

BROCE BROOM - KR-350

GROVE - Hydraulic Rough Terrain Cranes

10%

2.2 Trailer and/or Trailer Mounted Equipment (Ex: Air Compressors,

Generators, Vactors, Portable Traffic Control Devices, Trailers,

Paving Equipment) NONE

2.3 Agriculter Equipment (Ex: Tractors, Attachments, Implaments,

Sprayers) NONE

2.4 Construction Equipment (Ex: Trenchers, Skidsteers, Loaders,

Backhoes, Excavators, Motor Graders, Rollers, Compactors,

Boring Equipment, Conveyors, Crawler/Dozers, Drag Line,

Paving Equipment, Trash Pumps, Lights Towers, Snow/Ice

Equip, Hydraulic Hammers, Ground Thawing, Cement Equip.)

KOMATSU - Crawler Dozers, Dump Trucks, Wheel Loaders,

Mini, Excavators, Hydraulic Excavators. DYNAPAC

and VOLVO Soil Compactors.

DYNAPAC and VOLVO Asphalt Rollers.

NPK Hydraulic Hammers

KPI Conveyors 10%

2.5 Turf Maintenance Equip (Ex: Mowers, Aerators, Seeders, Utility

vehicles, Sprayers, Attachments, Implaments) NONE

2.6 Forestry Equipment (Ex: Tree Trimming Equip, Brush

Cutters/Chippers, etc.) NONE

2.7 Maintenance Equipment (Ex: Fork Lifts, Scissor/Man Lifts, Floor

Sweepers, Sewer Equipment) NONE

2.8 Seasonal Rental

2.9 Other MOROOKA RUBBER TRACK CARRIERS 10%

2.10 Other N/A

2.11 Other N/A

3.0 DELIVERY CHARGES ENTER YOUR RESPONSE BELOW

3.1 Deivery Starting Point: City, State, ZIP Closest RMS Location

3.2 Price Per Loaded Mile: 4.25$

3.3 Minimum Delivery or Pickup Charge: 360.00$

State of Minnesota Districts District City Locations

1 Virginia and Duluth

2A Bemidji

2B Crookston

3A Brainerd, Wadena, Long Prairie, Aitkin, Motley, Baster, Little

Falls, and Garrison

3B St. Cloud: St. Cloud, Milaca, Mora, Paynesville, Buffalo, Elk

River

4 Detroit Lakes & Morris: Benson, Henning, Morris, Hawley,

Alexandria, Wheaton, Moorhead, Perham Appleton,

Mahnomen, Barnesville, Fergus Falls

6 Rochester and Owatonna

7 Mankato and Windom

8 Marshall and Willmar

Metro Twin Cities

PLEASE PURCHASE Excel Export To Multiple PDF Files Software

MnDOT DISTRICT: 3A, 3B, 4, 6, 7, 8, METRO

1.0 DEALER/DISTRIBUTOR INFO FOR THIS DISTRICT: ENTER YOUR RESPONSE BELOW

1.1 Authorized Dealer Name: Road Machinery & Supplies

1.2 Dealer Street Address 5633 W Hwy 14

1.3 Dealer City / State / Zip Savage, MN 55378

1.4 Dealer Point of Contact Name Karen Montour

1.5 Dealer Point of Contact Phone 952-895-7026

1.6 Dealer Point of Contact Email kmontour@rmseq.com

1.7

State the days and hours your company offers rental equipment Open hours Monday - Friday 7-5

1.8 Delivery Lead Time After Receipt of Order 48 hours

1.9 Price List Name, Date and/or ID Number 2017 Rental Catalog 2.22.17

1.10 Website Address www.rmsequipment.com

2.0 EQUIPMENT DESCRIPTION CATEGORY

LIST EXAMPLES OF EQUIPMENT OFFERED IN THIS CATEGORY

BELOW

PERCENT DISCOUNT (%)

OFF CURRENT RENTAL

CATALOGUE LIST PRICE

2.1 Truck and/or Truck Mounted Equipment (Ex: Aerial Man lift,

Cranes, Flat beds, Utility, Dump, Log Loader, Street Sweepers,

Hydro Seeder, Snow/Ice Equip.)

BROCE BROOM - KR-350

10%

2.2 Trailer and/or Trailer Mounted Equipment (Ex: Air Compressors,

Generators, Vactors, Portable Traffic Control Devices, Trailers,

Paving Equipment) LB PERFORMANCE - RW35A Road Widener 10%

2.3 Agriculter Equipment (Ex: Tractors, Attachments, Implaments,

Sprayers)

2.4 Construction Equipment (Ex: Trenchers, Skidsteers, Loaders,

Backhoes, Excavators, Motor Graders, Rollers, Compactors,

Boring Equipment, Conveyors, Crawler/Dozers, Drag Line,

Paving Equipment, Trash Pumps, Lights Towers, Snow/Ice

Equip, Hydraulic Hammers, Ground Thawing, Cement Equip.)

KOMATSU - Crawler Dozers, Dump Trucks, Wheel Loaders,

Mini, Excavators, Hydraulic Excavators. DYNAPAC

and VOLVO Soil Compactors.

DYNAPAC and VOLVO Asphalt Rollers.

NPK Hydraulic Hammers

KPI Conveyors 10%

2.5 Turf Maintenance Equip (Ex: Mowers, Aerators, Seeders, Utility

vehicles, Sprayers, Attachments, Implaments) NONE

2.6 Forestry Equipment (Ex: Tree Trimming Equip, Brush

Cutters/Chippers, etc.) NONE

2.7 Maintenance Equipment (Ex: Fork Lifts, Scissor/Man Lifts, Floor

Sweepers, Sewer Equipment) NONE

2.8 Seasonal Rental

2.9 Other MOROOKA RUBBER TRACK CARRIERS 10%

2.10 Other N/A

2.11 Other N/A

3.0 DELIVERY CHARGES ENTER YOUR RESPONSE BELOW

3.1 Deivery Starting Point: City, State, ZIP Closest RMS Location

3.2 Price Per Loaded Mile: 4.25$

3.3 Minimum Delivery or Pickup Charge: 360.00$

State of Minnesota Districts District City Locations

1 Virginia and Duluth

2A Bemidji

2B Crookston

3A Brainerd, Wadena, Long Prairie, Aitkin, Motley, Baster, Little

Falls, and Garrison

3B St. Cloud: St. Cloud, Milaca, Mora, Paynesville, Buffalo, Elk

River

4 Detroit Lakes & Morris: Benson, Henning, Morris, Hawley,

Alexandria, Wheaton, Moorhead, Perham Appleton,

Mahnomen, Barnesville, Fergus Falls

6 Rochester and Owatonna

7 Mankato and Windom

8 Marshall and Willmar

Metro Twin Cities

PLEASE PURCHASE Excel Export To Multiple PDF Files Software

WWW.RMSEQUIPMENT.COM952-895-9595

RENTAL GUIDEVOL. 2017 NO. 1

2017 Rental GUIDE

Model Day Week Four Wk HP Operating Weight (lbs)D37PX-23* $535 $1,590 $4,760 89 19,357D39PX-23* $575 $1,720 $5,160 105 21,363D39PX-24** $610 $1,810 $5,420 105 22,817D51PXi-22 $1,240 $3,720 $11,150 130 29,057D51PX-24** $695 $2,085 $6,400 131 31,262D61PX-23* — $3,120 $9,340 168 41,138D61PXi-23* — $4,905 $14,710 168 41,381D61PX-24** — $3,290 $9,840 168 42,902D61PXi-24** — $5,180 $15,540 168 42,902D65PX-17* — $4,640 $13,940 205 47,335 D65WX-17* — $4,470 $13,250 205 45,945D65PXi-18** — $7,030 $21,120 217 50,420

Note: Units with Intelligent technology may require on the job training. The customer is responsible for travel and per diem expenses for this service. Please contact your local dealer for more information.

WIDE TRACK CRAWLER DOZERS

Model Day Week Four Wk HP/Heaped Cap. Empty Weight (lbs) Max GVWHM300-5** — $4,675 $14,000 332/22.4CY 55,986 117,892 HM400-3* — $5,920 $17,750 469/40T-29.2CY 74,207 162,569HM400-5** — $6,220 $18,680 469/31.4CY 77,488 165,633

DUMP TRUCKS

Model Day Week Four Wk HP/Heaped Cap. Operating Weight (lbs)WA250-6 $635 $1,890 $5,670 138/3.0 25,448 WA270-7* $675 $2,030 $6,050 149/3.0 28,836WA270-8** $710 $2,130 $6,370 149/3.0 29,388WA320-6* — $2,180 $6,550 167/3.7 33,790WA320-7* — $2,320 $6,920 165/3.7 33,984WA320-8** — $2,430 $7,280 165/3.7 34,987WA380-8** — $3,130 $9,390 191/4.0 40,929WA470-7* — $3,910 $11,700 272/5.5 53,308WA470-8** $1,305 $3,910 $11,700 272/5.5 55,579WA500-7* — $5,830 $17,470 357/8.0 75,453WA500-7 Yard Loader* $6,870 $20,590 357/9.8 80,270WA500-8** — $6,130 $18,390 357/8.0 77,856WA500-8 Yard Loader** $7,230 $21,680 357/9.8 81,152WA600-6 — $9,250 $27,750 527/9.75 118,800

WHEEL LOADERS

TopCon Base & Rover — $2,740

MINI EXCAVATORSModel Day Week Four Wk Max Dig Depth Operating Weight (lbs)PC55MR-5 $360 $1,080 $3,240 12’4” 11,618With Hydraulic Thumb $380 $1,140 $3,420 PC88MR-10 $565 $1,690 $5,050 15’2” 19,290

*Tier 4 Final**Tier 4 Interim

KOMATSU RENTAL EQUIPMENT

1 | RMS 2017 Rental Guide

HYDRAULIC EXCAVATORSModel Day Week Four Wk Max Dig Depth Operating Weight (lbs) HPPC138USLC-11 Tier 4 Final With 24” shoes, 8’2” arm $800 $2,380 $7,120 18’0” 32,628 97.2 With Hydraulic Thumb $915 $2,725 $8,150 With NPK GH7 Hammer $1,420* $4,240* $12,690* See page 8 *Plus $155 per inch point wear PC170LC-10 Tier 4 InterimWith 28” shoes, 8’7” arm $720 $2,160 $6,480 19’7” 41,600 115With extra Heavy Counterwt. $720 $2,160 $6,480 42,680 115With Hydraulic Thumb $800 $2,405 $7,225 38,740With NPK GH7 $1,340* $4,020* $12,050* See page 8 40,640With Genesis GVP15 — — $13,000** See page 9 40,940*Plus $155 per inch point wear ** Plus edge or wear charge

PC170LC-11 Tier 4 Final $760 $2,275 $6,820 19’7” 41,180 121

PC210LC-11 Tier 4 FinalWith 31.5” shoes, 9’7” arm $910 $2,730 $8,180 21’9” 53,882 165With Skeleton Bucket $990 $2,965 $8,870 With Hydraulic Thumb $1,020 $3,045 $9,090 With Genesis GSD50 Grapple — — $9,820** See page 9 With Genesis GXP300R Shear — — $17,770** See page 8 With NPK GH9 Hammer $1,630* $4,880* $14,650* See page 8 With Gensco Magnet $1,240 $3,710 $11,110 With NPK GH10 Hammer $1,770* $5,300* $15,900*

PC228USLC-10 Tier 4 Interim With 31.5” shoes, 9’7” arm $885 $2,640 $7,920 21’9” 54,405 148 PC240LC-10 Tier 4 Interim With 31.5” shoes, 10’ arm $940 $2,820 $8,420 22’8” 55,129 177With hydraulic thumb $1,050 $3,135 $9,330

PC240LC-11 Tier 4 Final With 31.5” shoes, 10’ arm $990 $2,960 $8,860 22’8” 55,000 177With hydraulic thumb $1,100 $3,275 $9,770

PC290LC-10 Tier 4 Interim With 31.5” shoes, 11’6”’ arm $1,140 $3,410 $10,220 22’8” 68,234 196With Young 60’ Long Front $1,310 $3,920 $11,760 68,260 (Less bucket)With hydraulic thumb $1,250 $3,725 $11,130

PC290LC-11 Tier 4 Final With 31.5” shoes, 11’6”’ arm $1,200 $3,600 $10,770 22’8” 68,234 196With Young 60’ Long Front $1,380 $4,120 $12,350 68,260 (Less bucket)With hydraulic thumb $1,310 $3,915 $11,680

Model Day Week Four Wk PC138-PC290 $67 $190 $560PC360 + — $355 $1060FOR ALL UNITS WITH QUICK COUPLERS, ADD THE RENTAL RATE SHOWN TO THE MATCHING MACHINE MODEL.

QUICK COUPLERS

RMS 2017 Rental Guide | 2

HYDRAULIC EXCAVATORSModel Day Week Four Wk Max Dig Depth Operating HP Weight (lbs) PC360LC-10 Tier 4 Interim With 33.5” shoes, 13’2” arm — $4,070 $12,200 34’7” 79,930 257With Genesis GXP300R Shear — — $21,790** 87,737With Genesis GXP660R Shear — — $30,400** 99,633 With Genesis GSD70 Grapple — — $14,250 79,292 With Genesis LXP300 Multi Jaw Processor $30,160** 87,300 With Genesis GDR300 Processor— — $20,400** 87,537With Hydraulic Thumb — $4,435 $13,290 82,037With NPK GH12 hammer — $7,340* $22,080* 85,287With NPK GH15 hammer — $7,710* $23,010* 82,192Additional Charge for Q.Coupler — $355 $1,060

PC360LC-11 Tier 4 Final With 33.5” shoes, 13’2” arm — $4,300 $12,880 26’10” 80,547 257With Genesis GXP300R Shear — — $22,470** With Genesis GXP660R Shear — — $31,080** With Genesis GSD70 Grapple — — $14,930 With Genesis LXP300 Multi Jaw Processor $30,840** With Genesis GDR300 Processor— — $21,080** With Hydraulic Thumb — $4,665 $13,970 With NPK GH12 hammer — $7,570* $22,760* With NPK GH15 hammer — $7,950* $23,690* Additional Charge for Q.Coupler — $355 $1,060 PC360LCi-11 Tier 4 Final — $6,430 $19,270 26’10” 80,547 257

PC390LC-10 Tier 4 Interim With 33.5” shoes, 13’2” arm — $4,430 $13,270 26’7” 89,572 246With Genesis GXP300R Shear — — $22,860** 97,171With Genesis GXP660R Shear — — $31,470** 104,171 With Genesis GSD70 Grapple — — $15,320** 92,971 With Genesis GDR300 Processor— — $21,470** 96,971With Genesis LXP300 Multi Jaw Processor $31,230** 96,671With Hydraulic Thumb — $4,795 $14,360 91,471 With NPK GH15 hammer — $8,070* $24,080* 95,871With NPK GH18 hammer — $9,900* $29,320* 96,871With Young 60’ long front — $5,040 $15,100 90,357 (Less bucket)Additional Charge for Q.Coupler — $355 $1,060

PC390LC-11 Tier 4 Final With 33.5” shoes, 13’2” arm — $4,650 $13,940 26’7” 90,441 257 With Genesis GXP300R Shear — — $23,530** With Genesis GXP660R Shear — — $32,140** With Genesis GSD70 Grapple — — $15,990** With Genesis GDR300 Processor— — $22,140** With Genesis LXP300 Multi Jaw Processor $31,940** With Hydraulic Thumb — $5,015 $15,030 With NPK GH15 hammer — $7,950* $23,690* With NPK GH18 hammer — $10,120* $29,990*

*Plus $285 per inch point wear** Plus edge or wear chargeFor more information on Genesis & NPK attachments, see page 8 & 9.

3 | RMS 2017 Rental Guide

Model Day Week Four Wk Max Dig Depth Operating HP Weight (lbs) PC490LC-10 Tier 4 Interim With 35.5” shoes, 13’1” arm — $5,370 $16,080 27’6” 109,250 359 Optional Arm Sizes 11’1” or 15’9”With Hydraulic Thumb — $5,750 $17,220 112,050With Genesis LXP400 Multi Jaw Processor — — $36,330** 120,505 With NPK GH18 Hammer — — $32,130* 117,050Additional Charge for Q.Coupler — $355 $1,060 *Plus $360 per inch pt wear** Plus edge or wear charge

PC490LC-11 Tier 4 Final With 35.5” shoes, 11’1” arm — $5,650 $16,920 25’5” 107,850 Optional Arm Sizes 13’1” or 15’9”With Hydraulic Thumb — $6,030 $18,060 111,650With Genesis LXP400Multi Jaw Processor — — $37,170** 119,105 With NPK GH18 Hammer — — $32,970* 115,650Additional Charge for Q.Coupler — $355 $1,060 *Plus $360 per inch pt wear** Plus edge or wear charge For more information on Genesis & NPK attachments, see page 8 & 9.

PC490LCi-11 Tier 4 Final — $7,770 $23,310 25’5” 107,850

PC650LC-8 With 36” Shoes, 17’1” arm — $8,480 $25,440 34’9” 146,390 PC800LC-8 Tier 3 With 40” track, 18’4” arm — $10,500 $31,500 184,530

HYDRAULIC ROUGH TERRAIN CRANES***CRANES

HYDRAULIC EXCAVATORS

Model Day Week Four Wk Max Capacity Operating Weight (lbs)YB7725* $675 $2,030 $6,100 25 Ton* 45,000Boom: 73 ftRT650E* $1,090 $3,270 $9,800 50 Ton* 77,000Boom: 105 ftRT765E-2* $1,470 $4,380 $13,130 65 Ton* 93,000 Boom: 110 ft*Northern Minnesota Only***Note: Crane erection and dismantle is customer’s responsibility. Call RMS Service for quote if assistance is needed.

RMS 2017 Rental Guide | 4

Model Day Week Four Wk Drum Width Operating Weight (lbs)CA1300/SD-45D $450 $1,330 $3,980 54” 10,600CA1300PD/SD-45D/F $480 $1,450 $4,150 54” 11,350* CA1500/SD75D, ROPS $540 $1,600 $4,790 66” 16,596CA1500/SD75D, CAB $675 $2,030 $6,060 66” 18,596CA1500PD/SD75F, ROPS $590 $1,770 $5,280 68” 17,395

SOIL COMPACTORSROAD WORK

Model Day Week Four Wk Drum Width Operating Weight (lbs)CA1500PD/SD75F, CAB $590 $1,770 $5,280 66” 19,395CA2500D, CAB $745 $2,200 $6,620 84” 22,050CA3500/SD-115DX, ROPS $740 $2,210 $6,620 84” 23,930CA3500/SD-115DX, Cab $775 $2,320 $6,940 84” 26,000CA3500PD/SD-115DXF or F, ROPS $775 $2,320 $6,940 84” 23,930*CA3500PD/SD-115DXF or F, Cab $880 $2,630 $7,880 84” 26,000** Add additional 3,000# for Bolt-on Pad foot kit.

SOIL COMPACTORS

Model Day Week Four Wk Working width Operating Weight (lbs) RW35A — $2,360 $7,070 1.5’-4’ 7,000

ROAD WIDENERS

Model Day Week Four Wk Working width Operating Weight (lbs) PT125C $410 $1,220 $3,650 68” 9,540 CP142 $420 $1,270 $3,800 69” 30,865PT240R — $2,260 $6,750 78” 36,218

PNEUMATIC TIRE ROLLERS

Model Day Week Four Wk Belt Drive Operating Weight (lbs)11-3060 — — $2,220 30” X 60’ Hyd 15,00011-3660 — — $2,280 36” X 60’ Elect 18,00013-3080 — — $2,830 30” X 80’ Hyd 20,00013-3680 — — $2,920 36” X 80’ Elect 21,00031-3080 — — $3,170 30” X 80’ Elect 18,70031-30100 — — $4,120 30” X 100’ Elect 23,70013-36100 — — $5,380 30” X 100’ Elect 23,00033-36150 — — $12,600 36” X 80’ Elect 66,00013-36125 — — $7,810 36” X 125’ Elect 43,00013-36150 — — $9,510 36” X 150’ Elect 52,100

CONVEYORSAGGREGATE

ROAD WORK

Model Day Week Four Wk Drum Width Operating Weight (lbs)DD25/CC1000 $180 $535 $1,590 39” 5,400/3,715C1100 $190 $565 $1,690 42” 5,180CC1200 $210 $665 $1,850 47” 5,735DD25W $220 $665 $2,000 47” 5,725CC1200C $225 $670 $2,010 47” 5,400CC1300 $320 $945 $2,820 51” 8,600CC4200 $645 $1,920 $5,760 68” 20,900CC6200 $825 $2,470 $7,400 84” 24,460

ASPHALT ROLLERS

Please call 952-895-9595 or contact your territory sales representative for milling options.

MILLING

5 | RMS 2017 Rental Guide

Model Day Week Four Wk Decks/Drive Operating Weight (lbs)CS3055, Primary Jaw Plant — — $27,660* Jaw/Elect King Pin weight: 50,000 *Plus crushing wear items Axle weight: 78,000 FT4250, Close CircuitedTrack Impactor** — — $31,970* HSI/Diesel 120,000*Plus crushing wear items; Screen cloth not includedMinimum training of 1 day, instructed by RMS, required for FT4250. See note below for details.FT2650 Jaw CrusherMobile Track Plant — — $29,460* Jaw/Diesel 110,000*Plus crushing wear itemsCH440** Cone Crusher — — $27,450* King Pin weight: 23,400*Plus crushing wear items; Screen cloth not included Axle weight: 51,760

CRUSHERS

AGGREGATE

Model Day Week Four Wk Belt Drive Operating Weight (lbs)942-18-20 — — $8,980 20 Ton Hopper 27,000 with 6# grizzly

FEED HOPPER

Model Day Week Four Wk Decks/Drive Operating Weight (lbs)1830PH — — $20,850* (3) 6’ X 20’/Elect 80,000*Screen Cloth Not Included

WASH PLANT

Model Day Week Four Wk Decks/Drive Operating Weight (lbs)PTSC2618VM — — $9,900* (2) 6’ x 18’/Electric 28,000High Frequency Screen*Screen Cloth Not Included2512K — — $14,710* (2) 5’ X 12’/Diesel 57,400Fold N Go Screen Plant*Screen Cloth Not IncludedJCI 6203 — — $11,030 (3) 6’ X 20’ 49,000 3-deck Horizontal w/two cross conveyors and switch gear*Screen Cloth Not IncludedJCI 7203 — — $15,520* (3) 7’ X 20’ 51,000 3-deck Horizontal w/two cross conveyors and switch gear *Screen Cloth Not IncludedAMS GT145 S — — $13,860 5’ x 14’ 3 deck 71,000 Mobile Track, Diesel PowerMS GT205 S — — $13,300 5’ x 20’ 2 deck 82,800 Mobile Track, Diesel Power

SCREEN PLANTS

Model Day Week Four Wk Belt Drive Operating Weight (lbs)13-42125 — — $8,300 42” X 125’ Elect 45,00033-36136LP — — $12,410 36” X 136’ Elect 54,220 Super Stacker47-3670 — — $7,070 (3) 36” x 70’ Elect Rollpack transfer conveyor

CONVEYORS

RMS 2017 Rental Guide | 6

Model Day Week Four Wk Broom Width Operating Weight (lbs)KR-350 $435* $1,080* $3,190* 8’ 4,900 With cab & A/C *Plus $80 per inch broom wear

BROOMS/SWEEPERS

OTHER EQUIPMENT

RUBBER TRACK CARRIERSModel Day Week Four Wk Working Width Operating Weight (lbs) Max. Load (Ibs)MST-800 — $2,210 $6,650 8’ 13,448 10,584MST-1500 — $2,640 $7,920 9’ 20,282 15,435MST-2200 — $3,170 $9,510 10’ 29,762 24,225

Model Day Week Four Wk Impulse Force Operating Weight (lbs) C4C $120 $345 $960 7,800 Ft. Lbs. 960C8C $260 $780 $2,330 24,000 Ft. Lbs. 2,325

HYDRAULIC COMPACTORSSCRAP/DEMOLITION

Model Day Week Four Wk Impact Class Operating Weight (lbs) PH-4 Fits PC88 $275* $835* $2,510* 1,300 Ft. Lbs. 1,025*Plus $105 per inch point wearGH-7 Fits PC138/PC160 $620* $1,860* $5,570* 2,500 Ft. Lbs. 2,965*Plus $155 per inch point wearGH9 Fits PC210/PC240 — — $6,470* 3,000 Ft. Lbs. 3,542*Plus $180 per inch point wearGH10 Fits PC210/PC240 — — $7,720* 4,000 Ft. Lbs. 4,003*Plus $180 per inch point wear

HYDRAULIC HAMMERS

Model Day Week Four Wk Decks/Drive Operating Weight (lbs)K200/6203**Cone Plant w/Screen — — $34,220 3/Electric K200 King Pin weight: 59,000 Quad Axle weight: 62,000K300In/Out Cone Crusher — — $25,250 - /Electric K200 King Pin weight: 41,000 Est. Quad Axle weight: 42,000 Est.*Plus crushing wear items**Requires a minimum 3 month rental commitment.

CRUSHERS

BOTTOM DUMP TRAILERSModel Day Week Four Wk Est. Net Payload 2060-40-2 $360 $1080 $3,230 66,000 @ 60 MPH Dual Axle

7 | RMS 2017 Rental Guide

Note: It is the customer’s responsibility to ensure that all operators of aggregate equipment are properly trained. If the customer does not have adequately trained personnel, RMS can provide 1-2 day training at start-up @ $1,500/day.

SCRAP/DEMOLITION

Model Day Week Four JawOpening/ Shear Shear Operating Wk Jaw Depth Force @ Force@ Weight (lbs) 5000 psi 5500 psi GXP300R __ __ $9,590* 23”/24” 800 880 8,100 Fits PC210LC 10’2” reach GXP660R __ __ $18,200* 32”/32” 1,475 1,625 15,100 Fits PC360LC 13’6” reach GXT445R __ __ $12,870* 28”/28” 11,000 Fits PC210LCGXT775R __ __ $21,010* 35”/37” 17,750 Fits PC390* All shears will be sent out with new knife edges. Wear charge on return is $975 per edge set plus build up charge.

MOBILE SHEARS

MATERIAL HANDLERModel Day Week Four Max Reach Operating Generator Wk Weight (lbs) Size825M — $5,300 $15,890 43’4” 64,250 15 kW 4 tine 1 CY orange peel grapple— $755 $2,260

Day Week Four JawOpening/Jaw Depth Operating Weight (lbs)LXP300 — — $17,960* Pulverizer: 23”/24” 7,270Fits PC300LC-PC390LC Shear: 22”/24” 7,600 Cracker: 43”/30” 7,560 LXP400 — — $20,250* Pulverizer: 38”/30” 11,255Fits PC490LC Shear: 24”/27” 11,065 Cracker: 47”/33.5” 11,145

MULTI JAW PROCESSORS*

All attachments for the multi-jaw processors will be provided with the rent including the stands.* All shears will be sent out with new knife edges. Wear charge on return is $975 per edge set plus build up charge.

SURESTRIKE HAMMERModel Day Week Four Wk Impact Class Operating Weight (lbs)6000 Fits PC600/PC650 — — $17,640* 75,000 Ft. Lbs. 27,000*Plus $360 per inch point wear

Model Day Week Four Wk Impact Class Operating Weight (lbs) GH12 Fits PC290/PC360 — — $9,880* 5,500 Ft. Lbs. 5,092*Plus $230 per inch point wearGH15 Fits PC360/PC390 — — $10,810* 8,000 Ft. Lbs. 6,267*Plus $285 per inch point wearGH18 Fits PC390/PC490 — — $16,050* 12,000 Ft. Lbs. 7,257*Plus $360 per inch point wearNote: To avoid damage or breakage to the hammer, regular greasing of the hammer chisel is required (every 1-3 hours). Chisel tool damage is the lessee’s responsibility.

HYDRAULIC HAMMERS

RMS 2017 Rental Guide | 8

Model Day Week Four JawOpening Operating Wk /Jaw Depth Weight (lbs) GSD50 — — $1,640* Jaw Opening: 95”, Jaw Closed 10” Fits PC200-290LC Movable jaw width: 30”, Lower jaw width: 44” 2,870 Grapple Capacity: 3-4 CY GSD70 — — $2,050** Jaw Opening: 110”, Jaw Closed 11.5” Fits PC300LC-PC390LC Movable jaw width: 30”, Lower jaw width: 44” 3,900 Grapple Capacity: 3.5-4.5 CY

Model Day Week Four Wk JawOpening/ Operating Jaw Depth Weight (lbs)GVP15 — — $6,520* Shear: 16”/15” 3,200Fits PC170 Cracker: 25”/25” 3,200

MULTIPROCESSOR*

GRAPPLES

DEMOLITION RECYCLER

RAZOR DEMOLITION TOOL

Model Day Week Four JawOpening Operating Wk /Jaw Depth Weight (lbs) GDR-300 — — $8,200* 43” / 39” 7,900 Minimum excavator weight 70,000# GDR-400 — — $10,660* 48” / 41” 11,000 Minimum excavator weight 100,000#

Model Day Week Four JawOpening Operating Wk /Jaw Depth Weight (lbs) GDT290 — — $7,530* 39” / 42” 7,000 Minimum excavator weight 60,000#

* All Genesis attachments will be sent out with new knife edges. Wear charge on return is $975 per edge set plus build up charge.**Plus stiff arm pad charge - $500

SCRAP/DEMOLITION

9 | RMS 2017 Rental Guide

Please note that on the following rate pages, the operating weight provided is an estimate and will vary depending on equipment options. Rental rates are subject to change.

1. CREDIT - All rentals require a customer to have an open account and are subject to approval by our credit department. Customer is responsible for payment of late fees for overdue accounts.

2. INSURANCE A. Liability: proof of General Liability insurance must be provided to RMS prior to taking possession of equipment. The minimum liability coverage amount is $1,000,000 per occurrence, with RMS named as an additional insured. B. Physical Damage: proof of physical loss insurance is required for the value of each piece of equipment rented. A damage waiver for physical loss can be provided by RMS at an additional cost of 12% of the rental rate.

3. CONTRACT: A rental contract must be signed for each separate order of rental equipment by the customer. In addition, the renter is required to provide complete job site information where equipment will be located including the job number and corresponding bond information, if applicable. Renter is responsible to notify RMS of any/all job or location changes of the rented equipment.

4. USE: Customer will ensure that operators and any personnel hired to haul equipment are familiar with the operation of the rental equipment and have read the operator’s manual. If the operator or customer has any questions regarding the proper operation or maintenance procedures, they should contact the RMS service department at 952-895-9595.

5. RATES: Rates shown in this publication do not include sales tax or damage waiver coverage. Rates are based as follows:- Daily - 8 hours- Weekly - 40 hours or 5 days- 4 Weeks - 176 hours- Any overtime hours will be prorated at 70% of the normal rental rate.

6. HAULING - Customer is responsible for all hauling charges to and from job sites.

7. REPAIRS & MAINTENANCE: While the units are in the possession of the renter, renter is responsible for normal preventative maintenance, as required by the manufacturer. Such items include oil changes, filter changes, greasing, etc. Customers will be assessed a per hour charge for their prorated change of oil and filter costs if performed by RMS during the rental period or on return of the unit.

Any damage to the equipment due to renter abuse or negligence will be charged to the lessee on return of the rental equipment.

8. ADDITIONAL RESPONSIBILITIES-RENTER: Ensure that equipment is properly secured to transport vehicles. Observe legal weights and dimensions.

Authorize transportation provider to sign shipping papers, checkout/in forms and safety checklists. Charges for abnormal tire wear including cuts, abrasions, and punctures.

Charges for manuals or keys not returned.Returning machine with full fuel tank or paying for fuel used.

Cleaning labor in excess of 1 hour, which would include shoveling of tracks.

Excess wear on ground engaging tools, wear items, and undercarriage.

Additional charges as listed on the rental rate sheet for type of equipment rented.

RENTAL TERMS & POLICIES

RMS 2017 Rental Guide | 10

PLEASE PURCHASE Excel Export To Multiple PDF Files SoftwareRESPONDER'S NAME: Karen Montour - Road Machinery & Supplies Co.

SWIFT EVENT TITLE & NUMBER: EQUIPMENT RENTAL

** Following is a list of all distributors that are authorized to sell the equipment listed above.

** The Swift Vendor Number (SWIFT UD) must be complete, including the vendor Swift ID and Location Code (LOC CODE).

COMPANY NAME SWIFT ID LOC CODE COMPANY ADDRESS ST /ZIP PHONE CONTACT NAME

Road Machinery & Supplies Co. 0000244135 002 5633 W Hwy 13, Savage MN 55378 952-895-7026 Karen Montour

Road Machinery & Supplies Co. 0000244135 003 315 Hoover Rd N, Virginia MN 55792 218-471-1065 Brad Carlson