planes irwin
DESCRIPTION
Planes irwin - Importers & Distributors of professional tools & technical supply for hi-tech. Gutman Barzilai (1983) LTD company imports Professional Tools close to 70 years. The wide range of our products appeal to all consumers, including private institutions, productive enterprises, high-tech companies and all professionals. Wholesale sale is made and private clients. http://www.gbtools.co.il/TRANSCRIPT
IRWIN University Specialist Program
IRWIN PLANES
IRWIN University Specialist Program
What are they used for?For removing excess material and applying
thefinal smooth finish to many jobs
They are used by Carpenters, Joiners, Builders &
Home Owners
IRWIN PLANES
IRWIN University Specialist Program
IRWIN PLANES
SP04
SP05
04
05
07
09 ½
060 ½
A151
A151R
778
Bench Planes
Block Planes
Rebate Plane
Spokeshaves
IRWIN University Specialist Program
THERE ARE BASICALLY THREE TYPES OF
BENCH PLANES
JACK PLANES SP4 – SP5 (THIS PLANE IS USED FOR ROUGHING
AND SQUARING TIMBER BEFORE THE FINISHED CUTS ARE APPLIED
OUR BUDGET PRICED PLANE.)
SMOOTHING PLANES 04 - 05 (THE MOST FREQUENTLY
PURCHASED PLANE USED FOR FINAL THE FINISHING OF TIMBER
HIGHER QUALITY PRODUCT.)
JOINTER PLANES 07 (THIS PLANE IS DESIGNED FOR PLANNING
UNEVENNESS ON LONG SURFACES PRIOR TO SMOOTHING
SPECIALISTS .)
BENCH PLANES
IRWIN University Specialist Program
Leaver Cap and screwPressed steel cap ironCarbon steel cutting ironLateral adjusting leaver
Plane frog or saddle for cutting ironCutting iron brass adjusting screw Handle & knob (Plastic / Wood)
Frog fine adjusting screwPlane mouth slot for waste removalCast iron base linished to 3 thou tolerance
IRWIN PLANES SPECIFICATIONS
IRWIN University Specialist Program
JACK PLANES SP4/SP5
For the initial preparation of rough timber the joiner would use this plane for bringing the timber down from a rough finish to a Reasonably working level our entry level plane.
SP4 9. 3/4” LENGTH 2” BLADE WIDTH
SP5 14” LENGTH 2” BLADE WIDTH
IRWIN University Specialist Program
SMOOTHING PLANES 04 / 05
The most frequently used plane this plane is a general purpose plane ideal for smooth finishing of timber a high quality product.
04 9. 3/4” LENGTH 2” BLADE WIDTH
05 14” LENGTH 2” BLADE WIDTH
IRWIN University Specialist Program
JOINTER PLANE 07
07 22” LENGTH 2. 3/8” BLADE WIDTH
JOINTER PLANEJointer planes are longer than smoothing planes. The extra length helps the plane to ”ride”on top of an uneven surface and gradually even these out, rather than following the unevenesses which a shorter plane has a tendecy to do.
IRWIN University Specialist Program
BLOCK PLANES
the cutting of end grain.Used by Cabinet Makers And Craftsmen
The block plane was originally designed for the planning of butchers chopping blocks.
But it is now used by the craftsmen and cabinet maker.
ARE USED FOR
IRWIN University Specialist Program
TWO TYPES OF BLOCK PLANE.
1. Low angled block plane.
2. Standard end grain block plane.
1. Low angled block planes are used for fine work on materials such as thin laminates and plastics, also ideal for chamfering on small scale work
2 Standard block planes are used for planning end grain in cabinet making.
IRWIN University Specialist Program
Pitched at 12 1/2 degrees - ideal for plastics and laminates. this plane has an adjustable mouth wide for coarse work or narrow for fine work
BLOCK PLANES 060.1/2
•A fully adjustable for depth of cut.
•Cutter blade held firmly in place by leaver cap.
•Machined on base and sides for accuracy.
•Adjustable mouth for coarse and fine work.
•Fine blade adjustment for accuracy of cut.
•Blade width 1 .5/8” –42mm
IRWIN University Specialist Program
BLOCK PLANE 09.1/2
•A fully adjustable for depth of cut.
•Cutter blade held firmly in place by leaver cap.
•Machined on base and sides for accuracy.
•Adjustable mouth for coarse and fine work.
•Lateral adjusting lever for cutting alignment.
•Blade width 1 .5/8” –42mm Pitched at 20 degrees a standard end grain plane with a cutting ironre-sharpening angle of 25° this plane also has an adjustable mouth wide for coarse work or narrow for fine work
IRWIN University Specialist Program
Designed to cut rebates up to 1.1/2” wide, the 778 is guided by an adjustment fence mounted on two steel guide rods for exact alignment.
These rods can be pushed through so that the fence can be used on either side.
REBATE PLANE 778
IRWIN University Specialist Program
Used for chamfering and shaping, flat
faced timber (A151) for convex
surfaces and round faced (A151R) for
concave surfaces.
SPOKESHAVES A151 / A151R
IRWIN University Specialist Program
FEATURES & BENEFITS
Bench Planes SP Range
Features BenefitsSolid Grey Iron construction Strong and Durable in use
Accurately machined components Give accuracy in cutting performance
Brass cutter adjusting wheel Stronger and will extend wear life
All parts replaceable Keeps cost down for the customer