placement broch ure -...
TRANSCRIPT
AAAAbbbbooooutututut ththththeeee DDDDeeeeppppartartartartmmmmenenenentttt::::
The department of Electronic Science is an integral part of the University of Pune,
was founded in 1984. It has been successfully producing postgraduates and doctorates of excellent caliber.
In recent years, electronics has made unprecedented growth in terms of good technology, new ideas and principles throughout the world. The rate of obsolescence of technologies has also increased tremendously. Researchers, academicians, industries and the society at large have to work in unison to meet the challenges of the rapidly growing discipline. The research organizations and industries that work in the frontier area are in need of highly skilled and scientifically oriented manpower. This manpower can be available only with flexible, adaptive and progressive training programs and a cohesive interaction among the research organizations, academicians and industries. Since its inception in 1984, Department of Electronic Science in Pune University has been consistently working towards this goal.
The MISSION of the Department is to advance scientific knowledge through
active research in key areas and percolating the same down to graduate level to create highly skilled and scientifically oriented man power.
CCCCoreoreoreore FFFFaaaacultycultycultyculty
Faculty member
Academic Interests
Dr. S.V. Ghaisas
Computer simulations related to non equilibrium phenomena, Calculations of nanoparticle electronic structures.
Dr. (Ms.) S.A. Gangal Sensors, Materials, Microwaves, Micro-machining.
Dr. A.D. Shaligram
VLSI Design, Optoelectronics, PC/Microcontroller based Instrumentation Simulation software development, Biomedical Instrumentation and sensors.
Dr.(Ms.)D.C. Gharapure
Image Processing and Machine Vision Applications, Pattern Recognition using Artificial Neural Networks, Virtual Instrumentation, Embedded system design.
VisitVisitVisitVisitiiiingngngng FFFFacultyacultyacultyaculty
Faculty member
Academic Interests
Prof. R.N. Karekar Atmospheric Science, Electronics, thin and thick film
Physics, Microwaves, Sensors, Microstriplines, Remote Sensing.
Dr. S. Ananthakrishnan Electromagnetics, Antenna Design, RF Design.
Mr. M.R. Sankararaman Electromagnetics, Antenna Design, Fiber optic Communication.
Mr. Shyam Kundapurkar Currently working with Media-Magic Technologies, specializing
in IT and Embedded System Design.
Mr. S. Vijay Kumar Currently working with Imagination Technologies Ltd., specializing in Computer Graphics, Supercomputing and Embedded System Design.
Mr. Vaibhav Pavnaskar Currently working with a RF short range IP producer in Pune. Specializing in GSM Operations, GSM RF frontend
design, Analog design, IC layout and PLLs.
Mr. Dhananjay Bodas Currently working with Agharkar Research Institute, as a scientist. Specializing in biomedical micro devices, micro-nano fabrication processes, micro-nano fluidics, surface and interface studies, thin film technology and nanoparticle research.
AAAAcadcadcadcadeeeemmmmicicicic ProProProProggggram:ram:ram:ram:
The department offers M.Sc., M.Phil. and Ph.D. programs. The M.Sc. program run by the department is an autonomous course and its contents are designed considering the latest developments in the field. The program moulds students towards mastery in the areas of individual interest, through course work and hands on practical sessions.
The purpose of the Masters Program is to provide a broad education within Electronic Science with opportunities to specialize in a specific area namely VLSI Design, Embedded System Design and Communication Technology. This is achieved through the set of fundamental subjects known as core courses, in addition to advanced courses that lay a further base, for exploration in the area of specialization .Syllabi for the advance courses are flexible and are revised from time to time considering the latest trends and developments in the technology.
The well equipped laboratories and individual projects provide exposure to principles and techniques of analysis, design and experimentation in the field selected. The department also offers an internship program of six months, in the final semester, that enables students to get training in industrial environment. The detailed syllabus is available on the web site, http:\\electronics.unipune.ac.in. In addition the department also has a well maintained library where standard text books and reference books on various topics are available.
CCCCoreoreoreore coursescoursescoursescourses:::: • Quantum and Statistical Mechanics.
• Mathematical Method in Electronics.
• Properties of Electronic Materials.
• Embedded System Applications.
SpecializationSpecializationSpecializationSpecialization coursescoursescoursescourses:::: VLSI design
• Processes in device fabrication.
• CMOS Design I: Circuit & Processes.
• Architecture and design of VLSI
systems.
Embedded system design
• Embedded System Design.
• Operating System and RTOS.
• Architecture and Design Of
Embedded Systems.
• Digital System Design.
• VLSI Design
• Electromagnetic Fields and
Waves.
• Digital Communication Technology.
• Semiconductor foundry technique.
• CMOS Design II: Mask Layouts.
• Industrial Controllers: PLC
and PID.
• Wireless Embedded
System.
Communication System design
• Antenna Design.
• Communication System Design.
• Architecture and Design of Communication System.
GGGGeneraleneraleneraleneral Electives:Electives:Electives:Electives:
• Electronic Circuit Design and Analysis.
• Power Supplies.
• Sensors and Actuators.
• C Programming.
• Computational Methods in Electronics.
• Foundation of Quantum Computing.
• Technical Communication.
• Power Electronics Devices &
Systems.
• Data Communication.
• Mobile Communication System.
• Optical Fiber
Communication.
• Microwave and Satellite
Communication.
• DSP: Algorithms and
Application.
• VHDL and Verilog: Testing
and Verification
• Processor Architecture
and Design.
• Industrial Applications of
Optoelectronics.
• Advanced Test and Measurement Instruments.
• Fundamentals of MEMS Design and Fabrication.
• Mechatronics.
Facilities
Computer Laboratory
• Cadence 5.1.41and Cadence 6.14 Tool with GPDK 45nm, 90nm and180 nm.
• ‘C’ compilers, Keil IDE, MATLAB, NI-LabVIEW.
• Xilinx Tools (CPLD/ FPGA design)
• ORCAD: P-Spice, LT-SPICE • Mentor Graphics PADS.
Embedded Systems Laboratory
• Microcontroller Kits
8051,AVR,PIC,Renesas
• Altium Development Kit.
• Data Acquisition System.
• Embedded System Design and Development
• FPGA Kits from Xilinx.
• Programming under 'C' and MATLAB.
• META Development board from
Imagination Technologies Ltd.
VLSI Laboratory
• Screen Printing and Firing Furnace.
• Schematic and Layout Design using CADENCE.
• Masks for Lithography.
• Spin Coating Facility.
• Ultra Sonic Cleaner.
• Vacuum Evaporation System.
• Plasma polymerization System.
Activated Reactive vaporation.
• RF, magnetron, DC Sputtering
System.
RF and Communication Laboratory
Digital and fiber optic communication trainer kits.
Antenna Trainer Kit.
RF antennas and circuit simulation tools (CST).
RF test and measurement instruments (Vector Network Analyzer (300 KHz-3 GHz), Spectrum Analyzer (100 KHz-6 GHz), RF Signal Generators etc).
State-of-art anti-static workstation .
A complete Radio Astronomy Receiver along with 4.5m dish antenna.
Students Profile:Students Profile:Students Profile:Students Profile:
1. VLSI DESIGN GROUP:
Student Project Undertaken
Mr. Aniruddha
Bhasale
Hands on experience on :
• Aluminium thin film deposition by CVD
• Lithography on Aluminium film
• Thickness measurement of thin films
• Oxidation on Silicon Wafer
• Plasma Ashing.
Working as an Intern engineer in Open Silicon
Research PVT. LTD., Bengaluru.
Mr. Prashant
Bhingare
Hands on experience on :
• Aluminium thin film deposition by CVD
• Lithography on Aluminium film
• Thickness measurement of thin films
• Oxidation on Silicon Wafer
• Plasma Ashing.
Working as an Intern engineer in Open Silicon
Research PVT. LTD., Bengaluru.
Mr. Jagdish Daingade
Hands on experience on :
• Aluminium thin film deposition by CVD
• Lithography on Aluminium film
• Thickness measurement of thin films
• Oxidation on Silicon Wafer
• Plasma Ashing. Designed Schmitt trigger.
Designed Differentiator and Integrator.
Ms. Ashlesha Gorde
Hands on experience on :
• Aluminium thin film deposition by CVD
• Lithography on Aluminium film
• Thickness measurement of thin films
• Oxidation on Silicon Wafer
• Plasma Ashing.
Designed Active Filter
Designed Differential Amplifier
Mr. Ranjeet Khedkar
Hands on experience on :
• Aluminium thin film deposition by CVD
• Lithography on Aluminium film
• Thickness measurement of thin films
• Oxidation on Silicon Wafer
• Plasma Ashing. Designed Power Supplies: Variable Regulated Power Supply using IC LM317 Regulated Power Supply using IC LM723
Mr. Abhijeet
Khobragade
Hands on experience on :
• Aluminium thin film deposition by CVD
• Lithography on Aluminium film
• Thickness measurement of thin films
• Oxidation on Silicon Wafer
• Plasma Ashing.
Designed constant Current Source using Op-amp and Transistor
Designed Tuned Amplifier
Mr. Janardhan
Landge
Hands on experience on :
• Aluminium thin film deposition by CVD
• Lithography on Aluminium film
• Thickness measurement of thin films
• Oxidation on Silicon Wafer
• Plasma Ashing.
Designed Bistable multivibrator circuit using IC 555.
Designed High pass and Low Pass filters using IC
741.
Mr. Dinesh Londhe
Hands on experience on :
• Aluminium thin film deposition by CVD
• Lithography on Aluminium film
• Thickness measurement of thin films
• Oxidation on Silicon Wafer
• Plasma Ashing.
Designed Constant current source using zener diode.
Designed DC timer with variable R,C.
Ms. Mohini
Somavanshi
Hands on experience on :
• Aluminium thin film deposition by CVD
• Lithography on Aluminium film
• Thickness measurement of thin films
• Oxidation on Silicon Wafer
• Plasma Ashing.
2. EMBEDDED SYSTEM DESIGN GROUP:
Student Project Undertaken
Ms.Sonali Bhusare
Follow me game
• Designed for 2 players.
• ATMEGA32 (AVR uC ).
• LED and Switch interface.
• 7 segment interface for display.
• Software development in C.
Ms.Nitu Chauvhan
Development of car parking system prototype
to indicate the number of cars with night alarm
• 89s52 MCU.
• LDR as light intensity sensor.
• LCD interface for display.
• Piezo buzzer interface for buzzer.
• Software development in C
Ms.Prerana Deshmukh
Wireless letter box
• 89s52 MCU.
• Use of IR transmitter and receiver.
• Piezo buzzer interface for alarm.
• Software development in C
Mr. Ishwar Gunjal
Follow me Game:
• Designed for 1 player.
• 89s52 MCU
• LED and Switch interface.
• 7 segment interface for display
• Software development in C
Mr. Parag Gadge
Reaction Timer
• 89s52 MCU
• LED and Switch interface.
• LCD interface for display
• Software development in C
Ms. Ankita Katre
Temperature monitoring system
• ATMEGA32 (AVR uC).
• LM-35 as temperature sensor.
• Use of built-in ADC for data digitization.
• LCD interface for display.
• Software development in C
Internship at Imagination Technologies Ltd.
Mr. Amit Kumbhar
Wireless letter box
• 89s52 MCU.
• Use of IR transmitter and receiver.
• Piezo buzzer interface for alarm.
• Software development in C
Internship at CEERI, Pilani.
Ms. Revathy Nayar
Development of car parking system prototype
to indicate the number of cars with night alarm
• 89s52 MCU
• LDR as light intensity sensor
• LCD interface for display
• Piezo buzzer interface for buzzer
• Software development in C Internship at Imagination Technologies Ltd.
Ms. Kanchan Pawar
Reaction Timer
• 89s52 MCU
• LED and Switch interface.
• LCD interface for display
• Software development in C
Ms. Manisha Rote
Follow me game
• Designed for 2 players.
• ATMEGA32 (AVR uC ).
• LED and Switch interface.
• 7 segment interface for display.
• Software development in C.
Mr.Mandar
Sahastrabuddhe
Temperature monitoring system
• ATMEGA32(AVR uC).
• LM-35 as temperature sensor.
• Use of built-in ADC for data digitization.
• LCD interface for display.
• Software development in C
3. COMMUNICATION SYSTEM DESIGN GROUP:
Student Project Undertaken
Ms.Asawari Choudhari
• Internship: Working on Interferometer of 4.5m parabolic dish at Department of Electronic science, University of Pune.
Ms.Manasi Date
• Internship: FPGA based receiver system at Department of Electronic science, University of Pune.
Mr.Nilesh Gawade
• Internship: Study of communication link
design at Tetra Communication in Lavasa
city.
Ms.Vaishali Ghadage
• Internship: Study of communication link
design at Tetra Communication in Lavasa
city.
Ms.Meghna Kasbe
• Designed Schmitt trigger using 2N2222 and BC107
• Designed Audio preamplifier in JOVE receiver for Jupiter.
• Designed 10db Directional coupler using CST simulation Software.
Mr.Onkar Shinde
• Designed Phase Locked Loop using IC565.
• Designed FSK Modulator using timer IC555.
• Designed two element patch antenna array using computer simulation technology (CST) at 10.7 GHz frequency.
Ms. Shubangi Uplekar
• Internship: Measurement of electric field
and dielectric constant using Hall sensor at
Department of Electronic science, University
of Pune.
What Gives Us An Edge
Our students have hands on experience on tools like LabVIEW, MATLAB, Cadence, Xilinx,
FPGAs, Plotter interface, LCD interface, Data acquisition systems like NI-DAQ cards, various microcontroller kits like MCS 51, AVR, PIC, and Renesas. Students are also trained on the state of art facilities including communication and fabrication facilities available in the department. Easy availability of instruments like Network Analyzer, Spectrum analyzer, MSO and facilities like Internet, Wi-Fi etc make our department a hub for researchers. Recently department has obtained 4.5 meter parabolic dish antenna with aid of NCRA-TIFR. Currently the department is involved in research areas related to application of artificial neural networks, embedded system design, development and fabrication of sensors, image processing, modeling and simulations, design and development of optoelectronic systems, material science etc. Our tie ups with research institutes and industries help to expose students to latest technologies and keeps them way ahead of other non DOES students.
Involvement of faculty in research imparts knowledge of upcoming technologies to students. Students are taught to think independently from the beginning. Regular exams, viva voces, presentations, assignments, mini projects form a part of continuous internal assessment for grading students. Students are evaluated on 6 point scale which helps to maintain healthy competition.
The Placement cell,
Department of Electronic Science, University of Pune, Ganeshkhind, Pune-411007 Maharashtra,INDIA Ph: 020-25699841
Placement Co-ordinators: VLSI Design: Mr. Ranjeet Khedkar Ph: +91-9860911436 Email:[email protected] Mr.Abhijeet Khobragade Ph: +91-9975642463 Email:[email protected]
Embedded System Design: Ms. Revathy Nayar Ph: +91-9860394625 Email:[email protected]
Communication System Design: Ms. Manasi Date Ph: +91-9970839079 Email:[email protected]