Piriformis Fossa – Greater Trochanter

Femoral Recon Nail System FRN Standard Locking OptionsBack Table Chart for OR Personnel

Femoral Recon Nail – Standard LockingSurgical Instruments in Order of Use

This description alone does not provide sufficient background for direct use of the products. Instruction in handling these products in accordance with the corresponding surgical technique (FRNSTG001V1) and by a surgeon experienced in handling these products is essential.

1

Preparation/Opening Nail Insertion Proximal Locking Proximal Locking continued

2 3

1 03.010.020

2 03.010.023

4 03.033.008

5 03.033.007

6 03.010.500

7 03.033.004*

Alternative Instrument

Alternative Instruments

Alt. 5 03.037.008 351.707S Alt. 24 03.010.429

3 357.3999 03.033.006

12 03.010.523

13 03.010.522

8 03.010.517

10 03.033.001

14 03.033.002 03.033.003

Preparation/Opening1 03.010.020 Radiographic Ruler, for Titanium cannulated

Femoral Nails2 03.010.023 Radiographic Canal Width Estimator, for IM Nails3 357.399 3.2 mm Guide Wire, 400 mm4 03.033.008 14/3.2 mm Multi Hole Wire Guide5 03.033.007 14 mm Protection Sleeve 6 03.010.500 Silicone Handle, with Quick Coupling7 03.033.004* 14 mm Cannulated Flexible Drill Bit,

Large Quick CouplingAlt. 5 03.037.008 8 mm Cannulated Curved Awl

351.707S 2.5 mm Reaming Rod with ball tip and extension, 950 mm, sterile

Nail Insertion8 03.010.517 T-Handle Ball Hex Screwdriver, 8 mm

9 03.033.006 Cannulated Connecting Screw 10 03.033.001 Radiolucent Insertion Handle FRN11 04.033.XXXS Femoral Recon Nail12 03.010.523 Driving Cap, Threaded13 03.010.522 Spiral Combination Hammer, 500 grams

Proximal Locking14 03.033.002 Radiolucent Aiming Arm, Piriformis Fossa, FRN 03.033.003 Radiolucent Aiming Arm, Greater Trochanter, FRN15 03.010.491 Long Scalpel Handle16 03.010.070 4.2 mm Trocar, 210 mm17 03.010.065 8.0 mm/4.2mm Drill Sleeve 200 mm18 03.025.040 11.5 mm/8.5 mm Protection sleeve 188 mm

for ASLS19 03.010.061* 4.2 mm Three-Fluted Drill Bit quick coupling,

330 mm/100 mm Calibration

20 03.010.428 Depth Gauge for Locking Screws to 100 mm, for intramedullary nails

21 04.005.XXX* 5.0 mm Titanium Locking Screws, with T25 STARDRIVE Recess, for IM Nails

22 03.010.518 STARDRIVE Screwdriver/T25 self-retaining/ 319 mm

Distal Locking23 03.010.104* 4.2 mm Three-Fluted Drill Bit QC/Needle Point/

145 mm24 03.010.428 Depth Gauge for Locking Screws to 100 mm,

for Intramedullary Nails25 04.005.XXX* 5.0 mm Titanium Locking Screws, with T25

STARDRIVE Recess, for IM Nails26 03.010.513 Screwdriver STARDRIVE, T25, self-holding,

length 250 mm

Alt. 23 03.010.101* 4.2 mm Three-Fluted Radiolucent Drill Bit QC/Needle Point/145 mm

Alt. 24 03.010.429 Direct Measuring Device for Locking Screws to 100 mm, for intramedullary nails

End Cap Insertion27 04.003.XXX* Titanium End Caps, with T40 STARDRIVE Recess,

for IM Nails 28 03.010.520 Cannulated STARDRIVE Screwdriver, T40,

277 mm

*Available non sterile and sterile packed. Add “S” to catalog number to order sterile product.

Distal Locking End Cap Insertion

4 5

15 03.010.491

20 03.010.428

21 04.005.XXX*

22 03.010.518

23 03.010.104*

27 04.003.XXX*

24 03.010.428

11 04.033.XXXS

25 04.005.XXX*

26 03.010.513

17 03.010.065

18 03.025.040

19 03.010.061*

16 03.010.070

Alt. 23 03.010.101*

28 03.010.520

© DePuy Synthes 2018. All rights reserved. DSUS/TRM/0617/1505 01/18 STä

Synthes USA, LLC 1101 Synthes AvenueMonument, CO 80132

Manufactured or distributed by:Synthes USA Products, LLC 1302 Wrights Lane EastWest Chester, PA 19380

To order (USA): 800-523-0322 To order (Canada): 844-243-4321

Note: For recognized manufacturer, refer to the product label.

www.depuysynthes.com

Limited Warranty and Disclaimer: DePuy Synthes products are sold with a limited warranty to the original purchaser

against defects in workmanship

and materials. Any other express or implied warranties, including warranties of merchantability or fitness, are hereby

disclaimed.

Please also refer to the package insert(s) or other labeling associated with the devices identified in this surgical

technique for additional information.

CAUTION: Federal Law restricts these devices to sale by or on the order of a physician.

Some devices listed in this surgical technique may not have been licensed in accordance with Canadian law and may

not be for sale in Canada.

Please contact your sales consultant for items approved for sale in Canada.

Not all products may currently be available in all markets.

Implant SpecificationsFemoral Recon Nails

MaterialTitanium alloy** (TAN)

Entry PointsGreater Trochanter (5° lateral angle)Piriformis Fossa

Proximal Locking (4 holes)Two 130° CCD recon locking holesOne antegrade locking hole: 140° for GT Nails 135° for PF NailsStatic or dynamic interlocking with controlled dynamization of 7 mm

Distal Locking One static locking hole (AP)One static transverse locking hole (LM)Static or dynamic interlocking with controlled dynamization of 10 mmOne 10° offset locking hole, from antero-lateral to postero-medial

Features • Anterior Posterior bend – 1 m radius of curvature• Anatomic 14° anteversion• Nail designs for left and right femurs

9 mm–10 mm cannulated nails• Proximal diameter of 13 mm • Non fluted• Lengths: 280–480 mm (20 mm increments)

11 mm–12 mm cannulated nails• Proximal diameter of 13 mm • Fluted• Lengths: 300–480 mm (20 mm increments)

14 mm cannulated nails• Proximal and distal diameter of 14 mm • Fluted• Lengths: 300–480 (20 mm increments)

Screw CompatibilityAll nails use 5.0 mm Titanium Locking Screws (green)All nails use 6.5 mm Titanium Recon Screws (yellow)

5.0 mm Titanium Locking Screws*, with T25 STARDRIVE™ Recess, for IM Nails• Material: Titanium Alloy (TAN)* • 26 mm–80 mm (2 mm increments)• 85 mm–100 mm (5 mm increments)• T25 recess• 4.2 mm drill• Self-tapping tip

* Available non sterile and sterile packed. Add “S” to catalog number to order sterile product.** 6% Aluminum – 7% Niobium Alloy (TAN)

Antegrade

5° 13 mm for Nail 9, 10, 11, 12 mm 14 mm for Nail 14 mm

LM Dynamic 7 mmLM Static

36.5 mm

13 mm

140°

Reco

n

Reco

n

Nail 9, 10, 11, 12, 14 mm

Roc 1 m

AP

LM Static

LM StaticLM Dynamic 10 mmOblique 10°

62 mm

50 mm

30 mm20 mm10 mm 0 mm

FRN GT FRN PF

Antegrade

LM Dynamic 7 mmLM Static

28.5 mm

13 mm

135°

Nail 9, 10, 11, 12, 14 mm

Roc 1 m

AP

LM Static

LM StaticLM Dynamic 10 mmOblique 10°

62 mm

50 mm

30 mm20 mm10 mm 0 mm

13 mm for Nail 9, 10, 11, 12 mm 14 mm for Nail 14 mm

Reco

n

Reco

n