Great Steel and Metals

Pipe Fitting Selection Guide from leading Butt-weld fitting manufacturer in India

Great Steel and Metals www.greatmetal.com

If you are looking for pipe fittings but do not have the idea as which onesuitsyour needs thanGreat Steel & Metals,the leading Buttweld fitting manufacturer in Indiaare providing the selection guide using which you can select the pipe fittings as per the demands. www.greatmetal.com

www.greatmetal.com

www.greatmetal.comPipe fittings

Are available in various shapes, sizes and materials.Used to connect pipes of different lengthsand sizes.Pipe and pipe-fittings areproduced from a various materials for the transport of wide variety of solids and fluids.The wrong pipefittingcan lead to many problems like:

www.greatmetal.comLeaksUnwanted flow restrictions andExtra cost

The proper pipe fittings and flanges helps an equipmentto do the work that you intend it to do.The varioustypes of pipe fittings include plugs, 90 degree elbows, 45 degree elbows, flanges, nipples, concentric,reducers, eccentric reducers, straight tees and many more

www.greatmetal.comPoints to be considered:

The integrity of any fitting for proper functioning depends upon the following:

Selection of correct components or fittings appropriate for the applicationCareful preparation and cleaningCareful installation and assemblyCorrect tightening and loading

www.greatmetal.com One should consider below points to select pipe fittings:

1.Determine Material Compatibility: Material selection plays a vital role in the proper working of fittings.There are certain fluids which are not compatible with fitting material and these fittings cause leakage orsystem damage.

2.Check Temperature and Pressure Conditions: Appropriate temperature and pressure ratings areneededfor proper operating conditions. It is necessary to know whether the fittings are capable ofperforming attheir maximum temperature and maximum pressure ratings.

www.greatmetal.com Below are popular fitting types:

1.Threaded Pipe Fittings: These are the most commonly used fittings based on certain standards.There are threaded fittings of pipes in BSP (British Standard Pipe), NPT (National Pipe Taper) sizesfor high-pressure pipe connections.

2.Socket Weld Fittings: Asocket weld fitting is unthreaded, but has large sockets at both ends to accept a pipe end. The fitting isthen permanently welded to the pipe.

3.Butt WeldFittings: Butt-weld fittings whose dimensions, dimensional tolerances et cetera are defined in the ASME B16.9 standards. Light-weight corrosion resistant fittings are made to MSS SP43.

www.greatmetal.com4.Flanges: A flange is a method of connecting pipes, valves, pumps and otherequipmentto form a piping system. It also provides easy access for cleaning, inspection or modification.

Pipe Thread Sizes:

This is animportantconsideration for any pipe fitting. All pipes were manufactured with specification of a standardized outside diameter and wall thickness which in turn implies that the nominal pipe size is approximately equal to the inside diameter. Nowadays, various thread configurations are used.

www.greatmetal.comSelection criteriafor buyersMaterialPressure RatingsDesign and operationSafety information

Some of these questions are as follows before purchasing1. Can it handle pressure?2. Can it handle high temperature?3. Does it have proven long-term performance?4. Are the joints or seals reliable?5. Can it be fitted properly?6. Does it have confidence of manufacturers?7. Can it resist punctures and abrasion?8. Does it have quality and value?

www.greatmetal.comThe more the number of YES, the better is your product. So these are the tips byGreat Steel & Metalsusing which you can select the appropriate fittings for your needs.

www.greatmetal.com

www.greatmetal.com