pipe catalogue for pdf - bhushan power & steel · pdf fileabout us uring four decades of...

PIPES

TUBULAR WORLD

About us

uring four decades of existence Bhushan Power and Steel Ltd.(BPSL) has grown in to a leading business house having diversified business interests in a range of basic and value added products viz, DRI, PIG Iron, Billets, H.R. Coils, CR

Coils, GP / GC Sheets, Galvanized / Colour Coated Profiles, Precision Tubes, Black Pipe & G.I. Pipes, Cable Tape, TOR Steel, and Special Alloy Steel Round Bars, RCS Hexagons, Wire Rods and Bright Bars.

The distinctive characteristics of BPSL's philosophy and growth strategy that have set BPSL ahead of its competitors are :

- Acquire and ass imila te world class manufacturing technology.

- Strict adherence to quality standards.

- Rigorous application of metallurgical analysis and statistical process control techniques to ensure zero product nonconformity.

- Offer superior customer service for customer delight.

- Customer focus – every customer is considered as the most important partner in the supply chain focusing not only on product aspects but also on ways and means to minimize their inventory costs through reliable, just in time distribution.

We consider our associates as long term partners in progress, be fair and transparent in our dealings with them and always honour our commitments.

High quality, high technique and sincere service are the unchanged target that we aim at.

D

Manufacturing Process of Tubes (Round & Section)

The process of Tube Manufacturing starts with forming of H.R. Steel strips into Tubular shape & welding the edges under pressure using high frequency induction heating.

The basic raw material for manufacturing of pipes is H R Coils.

After receiving the raw material in Coil shape these are slitted into various widths according to requirements of Pipe Dia at Slitting machine.

After slitting the slitted coil is loaded on the uncoil er and stored in accumulator to enable the continuous running of the mill while tail end of slit is welded with the leading end of next coil with the help of MIG welding.

The strip is passed to a set of rolls to get the shape and the outer edges of strip are heated by high frequency induction coil. Outside flash of welding is removed with the help of round tool(Scarfing tool)so as to give better finish . The welded tube is again passed through a set of Rolls to get the specified tolerances on outside Diameter. Inside flash of weld can also be removed if required by the customer above 75mm outside Diameter. Our product Range is from 10.00mm NB to 200mm NB. After the pipes are made these are cut into the Required lengths with PLC Logistic Controls.

After cutting the pipes the pipes are sent to De burring machine for removal of Burr at the end to avoid any injury to the workmen.

After removing of Burr each pipe is Hydraulically tested to check the leakage in the pipe.

Various tests according to various specifications are carried out at the shop floor itself.

GALVANIZING & THREADING:

2 After hydraulic testing of pipes at 51kg/cm or as per customer requirement, the pipes are sent for galvanizing process to avoid the rusting on the

surface if required by the customer. The pipes are dipped in Hydro Chloric acid to remove the rust from the surface. After cleaning the surface the pipe is washed in running water. After washing the pipe is dipped in the solution of Zinc Chloride and ammonia Chloride to give a Base metal for Better pickup of Zinc on steel surface. The pipes are dipped in a molten zinc Bath at a temperature of

o450 C to get the proper adherent Coating.

After Galvanizing the pipes are sent for threading wherever it is required. The threading is done on the highly sophisticated machines to have the best threading to avoid any leakage on threads while laying in the use. After threading each pipe is marked with the series paint as required by BIS and bundled for dispatch.

Indian Standard American Standard British Standard Japanese Standard German Standard

IS 1161-1998 ASTM A500 BS 4360 JIS G3444/ 1994 DIN 2439 - 2441

GR A /1993 BS 7613/ 1994 --

IS-1239 ASTM A53/ 1993 BS 1387 / 1985 -- DIN 2439 - 2441

(Part 1) /2004 Elong.20% for all

Galv. 550Gms/m2

IS 9295 / 1983 ASTM A-513 BS 6323 / 1982 -- --

IS 3601 / 2006 -- BS 1775 JIS G3345 / 1983 DIN 2393 / 1994

BS 6323 / 1982

IS 4923 / 1997 ASTM A500 BS 6363 JIS G3466 / 1982 DIN 2395

GR A/1993

IS 4270 / 2001 -- BS 879 -- --

IS 3589 / 2001 -- BS 5534 -- --

IS 9537 / II -- BS 4568 -- --

IS/ISO/3183-2007 This Specification is equivalent to IS 1978 - 82 (Old Version)

EQUALENT INTERNATIONAL STANDARDS FOR VARIOUS INDIAN STANDARDS

DSC 7779

STEEL TUBES FOR ORDINARY USES IN WATER, GAS, STEAM & AIR

Conforming to IS:1239 (Part-I) 2004

Minimum Maximum

P.E. S & S P.E. S & SMM MM MM CLASS

15 21.00 21.40 2.00 14 0.95 0.96 1056 1046(1/2”) 21.00 21.80 2.60 12 1.21 1.22 826 82021.00 21.80 3.20 10 1.44 1.45 694 690

20 26.40 26.90 2.30 13 1.38 1.39 725 719(3/4”)

26.50 27.30 2.60 12 1.56 1.57 641 63726.50 27.30 3.20 10 1.87 1.88 535 532

25 33.20 33.80 2.60 12 1.98 2.00 505 500(1”)

33.30 34.20 3.20 10 2.41 2.43 415 41133.30 34.20 4.00 8 2.93 2.95 341 339

32 41.90 42.50 2.60 12 2.54 2.57 394 3891(1 /4”)

M42.00 42.90 3.20 10 3.10 3.13 322 31942.00 42.90 4.00 8 3.79 3.82 264 262

40 47.80 48.40 2.90 11 3.23 3.27 310 3061(1 /2”)

M47.90 48.80 3.20 10 3.56 3.60 281 27847.90 48.80 4.00 8 4.37 4.41 229 227

50 59.60 60.20 2.90 11 4.08 4.15 245 241(2”)

59.70 60.80 3.60 9 5.03 5.10 199 19659.70 60.80 4.50 7 6.19 6.26 161 160

65 75.20 76.00 3.20 10 5.71 5.83 175 171.51(2 /2”)

M75.30 76.60 3.60 9 6.42 6.54 156 15375.30 76.60 4.50 7 7.93 8.05 126 124

80 87.90 88.70 3.20 10 6.72 6.89 149 145(3”)

88.00 89.50 4.00 8 8.36 8.53 120 11788.00 89.50 4.80 6 9.90 10.10 101 99

100 113.00 113.90 3.60 9 9.75 10.00 102 100(4”)

113.10 115.00 4.50 7 12.20 12.50 82 80113.10 115.00 5.40 5 1 4.50 14.80 69 67

125 138.50 140.80 4.80 6 15.90 16.40 63 61(5”)

138.50 140.80 5.40 5 17.90 18.40 56 54150 163.90 166.50 4.80 6 18.90 19.50 53 51(6”)

LMHLMHLMHL

HL

HLMHL

HLMHLMHMHMH163.90 166.50 5.40 5 2 1.30 21.90 47 46

TOLERANCE

Thickness:

Light Tubes : + not limited - 8%

Medium &Heavy Tubes: + not limited - 10%

Weight:

Single Tube : + 10%(light series) - 8%

Single Tube : +/- 10%(Medium & Heavy series)

Nominal Bore

(N.B.)Outside Diameter Wall Thickness

MM*SWG

For quantities per load of 10 ton Min.: +7.5%(light series) -5.0%

For quantities per load of 10 ton Min.: +/- 7.5%(Medium & Heavy series)

Chemical Composition

As per IS: 10748 – 2004

Physical Properties

TensiIe strength : Min. 320 Mpa

Elongation % age : 20% Min. above 25 mm NB 12% Min. upto 25 mm NB

Hydro Test Pressure : 5 Mpa

NOMINAL WEIGHT

Kg / Meters

METERS / TON

* Standard Wire Gauge

INCH

HOLLOW STEEL SECTIONS FOR STRUCTURAL USE, SQUARE HOLLOW SECTION ( SHS )

Conforming to IS : 4923 – 1997

OTHER ALLOWABLE STRESS VALUES (in Mpa)

Steel Grade Min.Yield Stress Min. UTS

Yst 210 210 330Yst 240 240 410Yst 310 310 450

Note: Min.% Elongation: 10% for GR. Yst 310, 15% for GR. Yst 240 & 20% for Yst 210

e: The sizes which are not covered in the Table can also be supplied as per customer requirement (Clause – 8.1)

SHS *(DxB)

MM

THICKNESS

MM

UNIT WEIGHT

Kg/Meter Meter/Ton19 X 19 2.00 0.99 1010

2.60 1.20 833

2.90 1.30 769

25 X 25 2.00 1.36 735

2.60 1.69 592

3.20 1.98 505

32 X 32 2.60 2.26 442

3.20 2.69 372

4.00 3.19 313

38 X 38 2.00 2.18 459

2.60 2.75 364

3.20 3.29 304

4.00 3.95 253

40 X 40 2.00 2.31 433

2.60 2.92 342

3.20 3.49 287

4.00 4.20 238

49.5 X 49.5 2.60 3.69 271

3.20 4.45 225

4.50 5.95 168

60 X 60 2.60 4.55 220

3.20 5.50 182

3.50 5.96 168

4.50 7.43 135

72 X 72 3.20 6.71 149

4.00 8.22 122

5.00 10.01 100

6.00 21.69 46

132 X 132 4.00 15.75 63

5.00 19.43 51

6.00 23.01 43

150 X 150 5.00 22.26 45

6.00 26.40 38

7.00 30.44 33

180 X 180 5.00 26.97 37

6.00 32.05 31

8.00 41.91 24

4.50 11.88 84

5.40 14.01 71

100 X 100 3.60 10.64 94

4.50 13.08 76

6.00 16.98 59

113.5 X 113.5 4.00 13.43 74

5.00 16.53 60

6.00 19.53 51

125 X 125 4.00 14.87 67

5.00 18.33 55

80 X 80 3.20 7.51 133

4.00 9.22 108

5.00 11.27 89

91.5 X 91.5 3.60 9.67 103

SHS (DxB) *

MM

THICKNESS

MM

UNIT WEIGHT

Kg/Meter Meter/Ton

* D : Depth B : Breadth

End Finish: Plain Ended- Mechanically sheared, mill-cut finish without further machining.

Surface Finish: Black without any surface treatment of oiling or varnishing.

Raw Material: Sulphur content: 0.05% max. Phosphorus content:0.05% max.

General technical specification and tolerances:

Spec : IS:4923:1997

Length: 6.0m +/- 0.05mm customized length

ranging from 4m to 8m may be supplied

Thickness: For all sizes: +/- 10.0%

Outer Dimensions: 1% with a Min. of 0.5mm

Corner Squareness: 0 90 +/- 0 2

Corner Radii: Max. 3x (thickness of the section)

Weight: on individual length : +10%, -8%

on lots of 10 MT: +/- 7.5%

thStraightness: Min1:200 of any length measured along the center line (mill straightened condition) u n le ss otherwise specifically arranged

Twist Tolerance: Max. 2mm:+:0.5mm /1m length, the measured relative vertical shift of any adjacent corner of the measured by keeping one side on flat surface.

HOLLOW STEEL SECTIONS FOR STRUCTURAL USE RECTANGULAR HOLLOW SECTION ( RHS )

96 X 48 3.20 6.71 1494.00 8.22 1225.00 10.01 100

90 X 60 3.20 7.01 1434.00 8.59 1165.00 10.48 95

100 X 50 3.20 7.01 1434.00 8.59 1165.40 11.21 896.00 12.27 81

120 X 60 3.60 9.50 1054.50 11.67 865.40 13.76 73

122 X 61 3.60 9.67 1034.50 11.88 845.40 14.01 71

145 X 82 3.60 12.16 824.50 14.99 675.40 17.74 56

150 X 75 3.60 12.05 834.50 14.85 675.40 17.57 57

150 X 100 3.60 13.46 744.50 16.62 605.40 19.69 51

172 X 92 3.60 14.25 704.50 17.61 575.40 20.88 48

200 X 100 4.50 20.15 506.00 26.40 387.00 30.44 33

200 X 150 4.50 23.68 426.00 31.11 328.00 40.66 25

4.50 6.02 16666 X 33 2.60 3.69 271

3.20 4.45 2254.50 5.95 168

75 X 25 2.60 3.73 2683.20 4.50 2224.50 6.02 166

80 X 40 2.90 5.03 1993.50 5.96 1684.50 7.43 135

50 X 25 2.00 2.15 4652.60 2.71 3693.20 3.24 3094.00 3.88 258

60 X 40 2.60 3.73 2683.20 4.50 222

Conforming to IS : 4923 – 1997

RHS

MM

THICKNESS UNIT WEIGHTKg/Meter Meter/Ton

40 X 20 2.00 1.68 5952.60 2.10 4763.20 2.49 402

MM

STEEL TUBES FOR PETROLEUM & NATURAL GAS INDUSTRIES FOR PIPE LINE

Confirming to IS : 3183 - 2007

Test Pressure (MPA)

L-210 L-245

15 21.30 2.80 1.28 17.00 17.00

20 26.70 2.90 1.70 17.00 17.00

3.90 2.19 17.00 17.00

25 33.40 3.40 2.52 17.00 17.00

4.50 3.21 17.00 17.00

32 42.20 3.60 3.43 17.00 17.00

40 48.30 3.70 4.07 17.00 17.00

50 60.30 2.10 3.01 9.20 10.20

2.80 3.97 only L-1753.20 4.51 only L-175

3.60 5.03 only L-175

3.90 5.42 16.20 17.00

4.40 6.07 17.00 17.00

4.80 6.57 17.00 17.00

5.50 7.43 17.00 17.00

65 73.00 2.10 3.67 7.20 8.90

2.80 4.85 only L-175

3.20 5.51 only L-175

3.60 6.16 only L-1754.00 6.81 13.80 15.10

4.40 7.44 15.20 17.00

4.80 8.07 16.30 17.00

5.20 8.69 17.00 17.00

5.50 9.16 17.00 17.00

Nominal

Size NB

Outside

Diameter D Thickness Weight

80 88.90 2.10 4.50 6.00 6.90

2.80 5.95 only L-175

3.20 6.76 9.10 10.50

3.60 7.57 only L-175

4.00 8.37 11.30 13.20

4.40 9.17 12.50 14.60

4.80 9.95 13.60 15.905.50 11.31 15.60 17.00

MM MM MM Kg/Mtr.

100 114.30 2.10 5.81 4.60 5.30

2.80 7.70 6.10 7.10

3.20 8.77 7.00 8.10

3.60 9.83 7.80 9.10

4.00 10.88 8.70 10.10

4.40 11.92 9.60 11.10

4.80 12.96 10.40 12.10

5.20 13.99 11.30 13.20

5.60 15.01 12.20 14.20

125 141.30 2.10 7.21 3.70 4.30

3.20 10.90 5.60 6.50

4.00 13.94 7.00 8.20

4.80 16.16 8.40 9.80

5.60 18.74 9.80 11.50

150 168.30 2.10 8.61 3.10 3.90

2.80 11.43 4.10 4.80

3.20 13.03 4.70 5.50

3.60 14.62 5.30 6.20

4.00 16.21 6.50 7.40

4.40 17.78 7.10 8.10

4.80 19.35 7.70 8.90

5.20 20.91 8.30 9.60

5.60 22.47 9.40 11.00

200 219.10 4.80 25.37 5.52 8.06

5.60 29.48 6.44 9.40

6.40 33.57 7.36 10.75

7.00 36.61 8.05 11.76

7.90 41.14 9.09 13.27

8.20 42.65 9.43 13.77

Test Pressure (Mpa)

L-210 L-245

Nominal

Size NB

Outside

Diameter D Thickness WeightMM Kg/Mtr.INCH

(1/2”)

(3/4”)

(1”)

1(1 /4”) 1(1 /2”)

(2”)

1(2 /2”)

(3”)

(4”)

(5”)

(6”)

MM MM

(8”)

INCH

TOLERANCES

OUTSIDE DIAMETER:

Less than 60.3mm +0.4mm-0.8mm L-175 0.21 Max 0.60 Max 0.03 Max 0.03 Max

More than 60.3mm +/-0.0075D

Thickness:

Less than 5.00mm +/-0.5mm5.00mm to 15mm +/-0.1T Radious of Bend: -6D

Weight:

Gd 175'175P'A-25 +10%-5% Distance between plates: -50% of OD(For Weld)

Gd 210,45 +10% 33% of OD(For metal)-3.5%

Lot Size +/-1.75%

Height of inside Beed: Max. 1.5mmAngle of Bevel: o o o30 + 5 – 0

Straightness: 0.2% of length

PHYSICAL PROPERTIES

Grade YST(Min.) TS(Min.)L-175 175 Mpa 310MpaL-210 210 Mpa 335 MpaL-245 245 Mpa 415 Mpa

Elongation %age: A' = Ao2/U0.9XCC' = 1940 Xc Cross Section Area

Grade C% Mn% S% P%

L- 210 0.22 Max 0.90 Max 0.03 Max 0.03 MaxL-245 0.26 Max 1.20 Max 0.03 Max 0.03 Max

Bend Test:

oAngle Of Bend: -180

Flattening Test:

Non Destructive Test:

Referance Hole:-1/8”

CHEMICAL COMPOSITION

STEEL TUBE FOR STRUCTURAL PURPOSE

Confirming to IS : 1161 - 1998

Outside Nominal WeightDiameter Thickness Black Tubes

D T Plain EndMM MM SWG Kg/Meter Meter/Ton

L21.30 2.00 14 0.947 1056M 2.60 12 1.210 826H 3.20 10 1.440 694L26.90 2.30 13 1.380 725M 2.60 12 1.560 641H 3.20 10 1.870 535L33.70 2.60 12 1.980 505M 3.20 10 2.410 415H 4.00 08 2.930 341L42.40 2.60 12 2.540 394M 3.20 10 3.100 322H 4.00 08 3.790 264L48.30 2.90 11 3.230 310M 3.20 10 3.560 281H 4.00 08 4.370 229L60.30 2.90 11 4.080 245M 3.60 09 5.030 199H 4.50 07 6.190 162L76.10 3.20 10 5.710 175M 3.60 09 6.420 156H 4.50 07 7.930 126L88.90 3.20 10 6.720 149M 4.00 08 8.360 120H 4.80 06 9.990 101L114.30 3.60 09 9.750 102M 4.50 07 12.200 82H 5.40 05 14.500 70L127.00 4.50 07 13.600 74M 4.80 06 14.500 69H 5.40 05 16.200 62L139.70 4.50 07 15.00 66.5M 4.80 06 15.900 63H 5.40 05 17.900 56L152.40 4.50 07 16.400 61M 4.80 06 17.500 57H 5.40 05 19.600 5 1L165.10 4.50 07 17.800 56M 4.80 05 18.900 53H 5.40 05 21.300 47L168.30 4.50 07 18.200 55M 4.80 06 19.400 51.5

H1 5.40 05 21.700 46H2 6.30 03 25.200 40

L193.70 4.80 06 22.400 45M 5.40 05 25.100 40H 5.90 04 27.300 37L219.10 4.80 06 25.400 39M 5.60 05 29.500 34H 5.90 04 31.000 32

15

20

25

32

40

50

65

80

100

110

125

135

150

150

175

200

Chemical Properties

C 0.12% Max

Mn 0.60% Max

P 0.04% Max

S 0.04% Max

Si 0.08% Max

Physical Properties

Grade YS TS % age

Mpa Mpa Elong.

YST-210 210 330 20

YST-240 240 410 17

Note: For tubes upto size 25mm NB including Elongation of 12% shall be permissible.

Weight

Single tubes (light series) +10%

Single tubes +/- 10%

(medium & heavy series)

Weight Truck LoadFor lot of 10 Ton Min.

Light Series +/- 5%

medium & heavy series +/- 7.5%

ToleranceOutside diameter:

upto and including 48.3mm + 0.4mm

Over 48.3mm +/- 1%

Thickness

+ Not Limited - 10%

-8%

- 0.8mm

(Min.) (Min.) (Min.)

INCH

(1/2”)

(3/4”)

(1”)

1(1 /4”)

1(1 /2”)

(2”)

1(2 /2”)

(3”)

(4”)

(5”)

(6”)

(8”)

(6”)

(7”)

0

CLASS MM

Nominal

Size NB

Conforming to IS : 3589 - 2001

Nominal N.B. Size

OutsideDiameter Wall Thickness

MM Kg/m Mtr/Tonne

150 (6”) 168.30 2.60 10.60 94.30168.30 3.20 12.00 83.30168.30 4.00 16.21 61.70168.30 5.00 20.14 49.66168.30 6.00 24.01 41.64168.30 7.00 27.84 35.91

175 (7”) 193.70 4.00 18.71 53.44193.70 5.00 23.27 42.97193.70 6.00 27.77 36.01193.70 7.00 32.23 31.03

200 (8”) 219.10 2.60 13.88 72.00219.10 3.60 19.13 52.27219.10 4.00 21.22 47.13219.10 5.00 26.40 37.88219.10 5.40 28.46 35.14219.10 6.00 31.53 31.72219.10 7.00 36.61 27.31

Calculated Weight

SPECIFICATIONS OF STEEL TUBES FOR WATER AND SEWAGE

Outside Diameter: +/- 0.75% of ODThickness: +/- 10% Ovality: Shall not exceed 1% of the specified diameterBead Height: The maximum height of the weld bead on the internal surface of the

pipes shall not exceed 60% of nominal wall thicknessStraightness: Shall not deviate from the straightness by more than 0.2% of total lengthLength: Single random length of 4 to 7 meter

Weight: +/- 7.5% on Truck Load

Grade Yield Stress Tensile Strength %elongationMpa(Min) Mpa(Min) (Min)

Fe-330 195 330 20Fe-410 235 410 18Fe-450 275 450 15

: The sizes which are not covered in the Table can also be supplied as per customer requirement (Clause – 11.1)

TOLERANCES

PHYSICAL PROPERTIES

MM MMINCH

Conforming to IS : 4270 - 2001 PLAIN END CASING PIPES

N.B. Size Outside Diameter Wall Thicknessmm mm mm Kg/m Mtr/Ton

100 114.30 5.00 13.48 74

125 141.30 5.00 16.80 59

150 168.30 5.00 20.13 50168.3 5.4 21.60 46

7.1 28.20 35.5

175 193.70 5.40 25.10 40193.7 6.4 29.60 34

8.0 36.60 27

200 219.10 5.40 28.46 35219.1 6.4 33.60 30

8.0 41.60 24

TOLERANCES

PHYSICAL PROPERTIES

Outside diameter of pipe: +/- 1.0%

Grade Y.S. (Min.) T.S.(Min.) %age Min.Mpa Mpa Elongation on

Thickness: + 15%

(N/mm2) (N/mm2) 5.65/So=GI

Up to 406.4mm OD - 12.5%

Fe 410 235 410 15%

Weight: + 10%Single Tube - 8%

Length: 4 to 7 mtrsunless otherwise specified

* Higher wall thickness than specified may be supplied as per requirement of the customer

Nominal Weight

ERW STEEL TUBES FOR WATER WELLS

TOLERANCES

STEEL TUBES FOR IDLERS FOR BELT CONVEYORS

Conforming to IS : 9295 - 1983

Outside Diameter Thickness Weightmm mm Kg / Mtr. Mtr. / Ton

63.50 3.65 5.39 185.5363.50 4.50 6.55 152.6776.10 3.65 6.52 153.3776.10 4.50 7.95 125.7888.90 4.05 8.47 118.0688.90 4.85 10.05 99.4888.90 6.30 12.83 77.93

101.60 4.05 9.74 102.64101.60 4.85 11.57 86.42101.60 6.30 14.81 67.52114.30 4.50 12.19 82.00114.30 5.40 14.50 68.96114.30 6.30 16.78 59.60139.70 4.50 15.00 66.65139.70 4.85 16.13 62.00139.70 5.40 17.89 55.90139.70 6.30 20.73 48.25165.10 4.50 17.80 56.18165.10 4.85 19.17 52.18165.10 5.40 21.27 47.02165.10 6.30 24.67 40.53219.10 5.40 28.50 35.09219.10 6.30 33.06 30.26219.10 7.10 37.12 26.95

Outside Diameter: +/- 0.8%

Thickness: +/- 10%

WeightSingle Tube: +/- 10%For quantities per loadOf 10 Ton Min.: +/- 7.5%

OvalityBelow 168.3mm OD: (0.5MM)168.3mm OD & above: (1.0MM)

Eccentricity 5% of wall thickness

Grade Y.S. (Min.) T.S.(Min.) %age Mpa Mpa Elongation

ERW-210 210 330 20ERW-240 240 410 18ERW-310 310 450 15

PHYSICAL PROPERTIES

CARBON STEEL TUBES FOR MECHANICAL & GENERAL ENGINEERING

Conforming to IS: 3601 - 2006

Outside

Diameter Thickness Mass

Area of

cross

Section

Moment of

Inertia

Modules of

Sections

Radius of

Gyration

mm mm Kg/m cm 4 cm4 cm3 cm

1.80 0.866 1.10 0.53 0.50 0.692.00 0.952 1.21 0.57 0.54 0.692.60 1.20 1.53 0.68 0.64 0.673.20 1.43 1.82 0.77 0.72 0.651.80 1.11 1.42 1.12 0.83 0.892.00 1.23 1.56 1.22 0.91 0.882.30 1.40 1.78 1.36 1.01 0.872.60 1.56 1.98 1.48 1.10 0.863.20 1.87 2.38 1.70 1.27 0.852.00 1.56 1.99 2.51 1.49 1.122.30 1.78 2.27 2.81 1.67 1.112.60 1.99 2.54 3.09 1.84 1.103.20 2.41 3.07 3.60 2.14 1.084.00 2.93 3.73 4.19 2.49 1.062.30 2.27 2.90 5.85 2.76 1.422.60 2.55 3.25 6.46 3.05 1.413.20 3.09 3.94 7.62 3.59 1.393.60 3.44 4.39 8.33 3.93 1.384.00 3.79 4.83 8.90 4.24 1.362.30 2.61 3.32 8.80 3.64 1.632.60 2.93 3.73 9.77 4.05 1.622.90 3.25 4.14 10.70 4.43 1.613.20 3.56 4.53 11.59 4.80 1.603.60 3.97 5.05 12.69 5.25 1.594.00 4.37 5.57 13.77 5.70 1.572.30 3.29 4.19 17.65 5.85 2.052.60 3.70 4.71 19.64 6.51 2.042.90 4.11 5.23 21.59 7.16 2.033.20 4.51 5.74 23.47 7.78 2.023.60 5.03 6.41 25.87 8.58 2.014.00 5.55 7.07 28.15 9.34 2.004.50 6.19 7.89 30.90 10.20 1.982.60 5.24 6.00 40.57 10.66 2.602.90 5.75 6.67 44.74 11.76 2.593.20 6.44 7.33 48.78 12.80 2.583.60 7.11 8.20 54.01 14.20 2.574.50 7.95 10.10 65.12 17.10 2.545.00 8.77 11.16 70.87 18.63 2.522.90 6.15 7.83 72.47 16.30 3.043.20 6.76 8.62 79.21 17.80 3.034.00 8.38 10.70 96.34 21.70 3.005.00 10.30 13.20 116.40 26.20 2.975.40 11.10 14.00 123.80 27.80 2.975.60 11.50 14.65 127.64 28.72 2.95

76.10

88.90

21.30

26.90

33.70

42.40

48.30

60.30

3.60 8.70 11.10 133.20 26.20 3.474.00 9.63 12.30 146.20 28.80 3.455.00 11.90 15.20 177.50 34.90 3.42

101.60

Outside

Diameter Thickness Mass

Area of

cross

Section

Moment of

Inertia

Modules of

Sections

Radius of

Gyration

mm mm Kg/m cm4 cm4 cm3 cm

3.60 9.83 12.50 192.00 33.60 3.924.50 12.20 15.50 234.30 41.00 3.895.40 14.50 18.50 274.50 48.00 3.866.30 16.80 21.20 315.00 55.10 3.833.60 12.10 15.38 356.36 51.02 4.814.00 13.40 17.04 392.57 56.20 4.804.50 15.00 19.10 437.20 62.60 4.785.00 16.60 21.20 480.50 68.80 4.775.40 17.90 22.80 514.50 73.70 4.756.30 20.70 26.30 591.00 84.70 4.734.50 16.40 20.90 572.20 75.10 5.235.00 18.20 23.20 629.50 82.60 5.215.40 19.60 24.90 674.50 88.50 5.204.50 17.80 22.70 732.60 88.70 5.685.00 19.70 25.10 806.60 97.70 5.665.40 21.20 27.10 864.70 105.00 5.656.30 24.80 31.40 992.00 120.00 5.634.00 16.20 20.64 696.87 82.81 5.814.50 18.20 23.20 777.20 98.40 5.795.00 20.10 25.70 855.80 102.00 5.785.40 21.70 27.60 917.70 109.00 5.766.30 25.20 32.10 1053.00 125.00 5.737.10 28.20 35.94 1169.66 139.00 5.708.00 31.60 39.70 1288.00 153.00 5.695.00 23.30 29.60 1320.00 136.00 6.675.40 25.10 31.90 1417.00 146.00 6.665.90 27.30 34.80 1536.00 159.00 6.646.30 29.10 37.00 1600.00 165.00 6.608.00 36.60 46.30 2004.00 207.00 6.574.50 23.80 30.32 1746.18 159.40 7.595.00 26.40 33.60 1928.00 176.00 7.575.60 29.50 37.60 2142.00 195.00 7.566.30 33.10 42.00 2404.00 219.00 7.548.00 41.60 52.00 1940.00 268.00 7.52

Grade Y.S.(Min.) T.S.(Min)

(Mpa) (Mpa)As Welded (less

than or equal to

33.7 mm OD)

As Welded

(more than or

equal to 33.7

mm OD)

WT160 160 310 15 22WT210 210 330 12 20WT240 240 410 10 15

TOLERANCE

± 0.15 mm

± 0.18 mm

± 0.25 mm± 0.31 mm± 0.36 mm± 0.43 mm± 0.58 mm± 0.65 mmAbove 152.40 to 168.30 mm

Outside Diameter upto & including 51 mmOver 51 mm to 76.10 mmAbove 76.10 to 88.90 mmAbove 88.90 to 101.60 mmAbove 101.60 to 114.3mmAbove 114.30 to 152.40 mm

165.10

168.30

193.70

219.10

% age Elongation

(Min.)

Outside Diameter upto 25.40 mm

114.30

139.70

152.40

Note: 1) Any OD & Thickness not covered in this table may be supplied as per customer requirement (Clause No. -10)

2) The Tolerance of thickness excluding the weld shall be ± 10 %

3.20 8.77 11.16 172.33 30.15 3.93

PHYSICAL PROPERTIES

Above 168.30 ± 0.75 mm

BHUSHAN POWER & STEEL LTD. CHENNAI

NO. 190(OLD 758) UNIT-F 3RD FLOOR MOUNT

CHAMBERS, MOUNT ROAD ANNASALAI, CHENNAI -2

TEL NO.: +91-44- 28551820, 42011130

FAX: +91-44- 28591130

MOB: +91-9790880356

BHUSHAN POWER & STEEL LTD. AHMEDABAD

B-207, GANESH PLAZA BUILDING, OPP.

NAVRANGPURA, BUS STAND, NEAR SWASTIK CHAR

RASTA, NAVRANGPURA,

AHMEDABAD – 380009 GJ

TEL NO. +91-79-30020857

FAX: +91-79- 30020857

MOB: +91-8128227777

EMAIL: [email protected]

BHUSHAN POWER & STEEL LTD. SECUNDERABAD

MITTAL CHAMBERS, R. NO. 315 (3RD FLOOR),

2-2-51, M.G. ROAD, SECUNDERABAD – 500003 A.P.

TEL NO. : +91-40-66901464

MOB: +91-9989407070

EMAIL:[email protected]

BHUSHAN POWER & STEEL LTD. JAMMU

NEAR SHIV MANDIR, NATIONAL HIGHWAY, GANGAYAL,

JAMMU- J&K

TEL NO.: 0191-2482082

FAX: +91-191-2430531

MOB: +91-9419143631


BHUSHAN POWER & STEEL LTD. KOLKATTA

J.K. MILLENNIUM CENTRE, 6TH FLOOR,

46 D, J.L. ROAD, KOLKATTA-700071

TEL NO: +91-33-30512299

FAX: +91-33- 30512235

MOB: +91-9831878738, 9831826344

BHUSHAN POWER & STEEL LTD. BANGALORE

NO.937, FIRST FLOOR, 16 TH MAIN, 2ND STAGE,

B.T.M. LAYOUT, BANGALORE -76

TEL NO: +91-80-26689037

FAX: +91-80 – 26689037

MOB: +91-7259006779

BHUSHAN POWER & STEEL LTD. MUMBAI

821, 2ND FLOOR, BUILDING NO. 8, SOLITAIRE

CORPORATE PARK, NEW LINF ROAD, ANDHERI (E),

MUMBAI- 400099

TELNO.: +91-22-30149000

MOB: +91-9987574041


BHUSHAN POWER & STEEL LTD. GHAZIABAD

PLOT NO. 9, SOUTH SIDE OF G.T. ROAD,

INDUSTRIAL AREA, GHAZIABAD – U.P.

TEL NO.: +91-120- 4560800

MOB: +91-9873002167

FAX: +91-120- 2867754


BHUSHAN POWER & STEEL LTD. KANPUR

PLOT NO. 40, 84/20, INDUSTRIAL AREA,

FAZALGANJ, KANPUR – U.P.

TEL NO. +91-512 – 2225085

MOB: +91-9873002167


REGISTERED & CORPORATE OFFICE: NEW

DELHI

BHUSHAN POWER & STEEL LTD.

4TH FLOOR, TOLSTOY HOUSE,

15-17, TOLSTOY MARG, CONNAUGHT PLACE, NEW

DELHI

TEL NO. +91-11-30451000

MOB: +91-9811798170 , 9873002167

FAX: +91-11- 23712737, 41522168

CORRESPONDANCE ADDRESS: CHANDIGARH


PLOT NO. 3, INDUSTRIAL AREA, PHASE-1,

CHANDIGARH-160002

TEL NO. : +91-172-3911715-18

FAX: +91-172-3911704

MOB: +91-9779455528, 9779455527



(PIPE & TUBE DIVISION) CHANDIGARH

PLOT NO.83, INDUSTRIAL AREA, PHASE-1,

CHANDIGARH-160002

TEL NO. 0172 3911869, 3911877, 3911863, 3911852

FAX: +91-172-3911876

MOB: +91-9779455602, 9779455604-605

EMAIL: [email protected], [email protected],

[email protected]

MANUFACTURING PLANTS:


(BLACK PIPE/G.I./GP) DERABASSI

CHANDIGARH AMBALA ROAD, DERABASSI – 140507,

DISTT. PATIALA, PUNJAB

TEL NO: +91-1762- 307900, 307901

FAX: +91-1762- 307902

EMAIL: [email protected], [email protected]

BHUSHAN POWER & STEEL LTD. ORISSA

VILL. THELKOLOI, P.O. LAPANGA

TEHSIL – RENGOLI, DISTT. SAMBALPUR – 768232

ORISSA

TEL NO.: +91-663-2535000, 2562026-32

MOB. : +91-7735429297

FAX: +91-663- 2562007, 2562011

EMAIL: [email protected], [email protected]

BHUSHAN POWER & STEEL LTD. KOLKATTA

NH – 2 DELHI ROAD, VILL. BANGIHATTI, MALLICKPARA

(HOOGLY) SERAMPORE – KOLKATTA (WEST BENGAL)

TEL NO. : +91-33-26003000

MOB: +91-9831826344, 9007545566

FAX: +91-33-26226523.


BHUSHAN POWER & STEEL LTD. HOSKOTE

55, KIADB INDUSTRIAL AREA,CHINTAMANI ROAD,

HOSKOTE TALUK, BANGALORE-562114

TEL NO. +91-80- 27971030

MOB: +91-9008477112, 9003934283


AARTI STRIPS PRIVATE LTD. NEPAL

WARD NO 1, TANKI SINWARI, VDC MORANG, BIRAT

NAGAR, NEPAL

TEL NO. 00977-21421261 - 67

MOBILE NO.: 00977-9852024277, 09831826344

DERABASSI

OTHER BRANCHES : l BADDI : +91-9816675252 l KALA AMB : +91-9805096166 l BHIWADI : +91-9001893577 l COCHIN : +91-8089300789

l COIMBATORE : +91-9047522240 l JAIPUR : +91-9001895110 l PARWANOO : +91-9816707293 l RAJKOT : +91-9227720718 l VIJAYAWADA : +91-9490435099

WAREHOUSES & BRANCHES:

BHUSHAN POWER & STEEL LTD. AURANGABAD

K- 99, MIDC WALUJ, AURANGABAD

TEL NO. +91-240-2563131

MOB: +91-9766623177


BHUSHAN POWER & STEEL LTD. FARIDABAD

PLOT NO. 264, SECTOR- 24, FARIDABAD

TEL NO. +91-129 – 4041360, 4080256

FAX: +91-129 – 4080251

MOB: +91- 9711130833, 9811798179, 7838049397

BHUSHAN POWER & STEEL LTD. HOSUR

65, SIPCOT INDUSTRIAL COMPLEX, ZUZUWADI,

HOSUR.

TEL NO.: +91-4344-274619, 274620

FAX: +91-4344- 274620

MOB: +91-9003934283


BHUSHAN POWER & STEEL LTD. LUDHIANA

B-29/542, OPP. DHANDHARI KALAN RAILWAY STATION,

G.T. ROAD, LUDHIANA – PB.

TEL NO. : +91161- 2511690

FAX+91-161 – 2511687, 2511689

MOB: +91-9779455630, 9779455631


BHUSHAN POWER & STEEL LTD. MANESAR

PLOT NO. 1A, SECTOR 6, IMT – MANESAR,

DISTT. GURGAON – HR

TEL NO. : _91-124- 4367909,4367782

FAX: +91-124- 4367908

MOB: +91-9811999308,09873002172


BHUSHAN POWER & STEEL LTD. PUNE

GAT NO. 119, VILLAGE CHIMBALI, NASIK – PUNE

HIGHWAY, CHAKAN, PUNE – MH.

TEL NO. +91-2135 – 261406, FAX : +91-2135 – 261406

MOB: +91-9766623171, 9766623170


BHUSHAN POWER & STEEL LTD. HARIDWAR

KHASRA NO. 727(A), SALIMPUR MAHDOOD, OPPOSITE

CAVIN CARE SECTOR – 4, SIDCUL, HARIDWAR- UA

MOB: +91-8859900072


BHUSHAN POWER & STEEL LTD. PANTNAGAR

PLOT NO. 48 – 57, SECTOR NO. 3, IIE, SIDCUL,

PANTNAGAR – DISTT.

UDHAM SINGH NAGAR - UA

TEL NO. : +91-5944-250848,250847

MOB: +91-9759622100


BHUSHAN POWER & STEEL LTD. NASHIK

PLOT NO. E - 22, MIDC, MALEGAON SINNAR

NASHIK- MH

MOB: +91-9766623176


BHUSHAN POWER & STEEL LTD. INDORE

PLOT NO. 378/2/8, GRAM PALDA, PATWARI HALKA

NO.26, INDORE – M.P.

MOB: +91-9755559112


pipe catalogue for pdf - bhushan power & steel · pdf fileabout us uring four decades of...

Documents