PIMFK1

V2.0MEDIUM FULL-MOTION TV WALL MOUNT

Thank you for choosing our product! We strive to provide the best quality and services for our customers. Would you kindly share your experience on Amazon if you are satisfied? Should you have any issues, please don't hesitate to contact us. Telephone：800-556-9829 Mon-Fri 10am - 6pm (PST) (USA)Email：supportus@pipishell.net (US/CA/DE/UK/FR/IT/ES/JP/AU)

WARNING!

supportus@pipishell.net

Tools Needed (Not Included)

Supplied Hardware

1 PCS

2 PCS

socket wrench socket wrench

CAUTION!!These anchors are for concrete or brick walls ONLY. DO NOT use them in drywall or wood studs.

2/5 in.(10mm)Wall Drill

7/32 in.(5.5mm)Wood Drill

M8 x 65 Lag Bolts

A1 (x4)

Ø6mm WashersA2 (x4)

Ø6mm WashersM4-5-6B1 (x4)

SpacersL10mmB2 (x8)

SpacersL5mmC (x8)

Philips ScrewsM6x15mm

D1 (x4)

Philips ScrewsM6x30mm

D2 (x4)

Philips ScrewsM8x15mm

E1 (x4)

Philips ScrewsM8x45mm

E2 (x4)

Philips ScrewsM4x30mm

F (x4)

Level(x1)

Wall AnchorA3 (x4)

1

Step 1 Before TV Bracket Installation

For Flat screen TV

or

Step 2 Install TV Bracket

D1/ F

B1

E1

2

2.95 in. 3.94 in.11.81 in.7.87 in.

15.75 in.

For Curved TV

or

Step 3A

3A-1 3A-2

Anchor

These anchors are for concrete or brick walls ONLY. DO NOT use them in drywall or wood studs.

Ensure marking at the center of the stud.

3

3A-3 3A-4

Step 3B

3B-1 3B-2

10mm

Position the wall plate at your desired height, level the wall plate and mark the polit hole locations.

7

76

A3AnchorThese anchors are for concrete or brick walls ONLY. DO NOT use them in

drywall or wood studs.

A2

socket wrench

5

5.5

2 5/9 in.(65mm).

(5.5mm)

4

3B-3

A3

Install wall plate using lag bolts A1, washers A2 and anchors A3. Tighten the lag bolts until they are pulled firmly against the wall plate.

Mounting your TV to the Brackets and lock it.

Step 4

Use the hammer to knock anchors A3 into the wall.

1

2

A2

A3

5

Step 5 Post Installation Level

Step 6 Tilt adjustment

socket wrench

socket wrench

+5° -12°

6

If needed, the TV can be leveled +/-3 degrees