pictus b - diatron b_v4-2015_web.pdf · pictus b analyzer meets the needs of small laboratories...
TRANSCRIPT
Pictus BThe semi-automated analyzer
for all laboratories
Diatron Clinical Chemistry • Quality without Compromise
Pictus B analyzer meets the needs of small laboratories having not only a low sample volume but also require a cost effective and reliable system. With a built-in thermal printer and simple operation it can be used to run a number of manual clinical chemistry and coagulation tests (in a cuvette). It is an open system but for optimal performance the Diatron range of reagents should be used.
Analyzer Overview
Pictus B
Key features and benefits
Fast, Flexible and Robust – the Pictus B provides reliable results.
Dual sampling modes: flow through-cell or standard and semi-micro cuvettes.
Multiple measurement options: Kinetic, 2 point kinetic & end point monochromatic or bichromatic.
User friendly with internal printer and simple operation through on-board keypad. It is also possible to use an optional PC keyboard.
High quality optical system with 9 filter positions with wide absorbance reading range.
Test options include photometry, turbidimetry and coagulation measurements.
Specifications Pictus B
Optical system
• Light source: Quartz-halogen lamp, 6VDC, 10W
• Photometric range: -0,5 to 4 ABS
• Detector: silicon photodiode
• Wavelength range: automatic selection from a filter wheel of up to 9 filter positions
• Standard interferential filters: 340, 405, 450, 505, 550, 620 and 750 nm, plus 2 empty positions for optional filters
Blanks
• Automatic zero setting
• Water blanking
• Reagent blanking
Cuvette System
• Dual-cuvette system: selectable between 18 µL metallic flow cell with quartz windows OR
• standard 10 x10 mm holder for macro or semi-micro cuvettes
• Temperature control: automatic cooling/heating system using Peltier-element
• Temperature setting between: 20°C to 37°C
• Aspirator system: built-in peristaltic pump driven by stepper motor with volume calibration; reversible for sample recovery
• Reaction volume: selectable between 200 to 600 µL per test
• Carry over: less than 5% for sipping volume 400 µL or more
Methods
• Max. 200 methods in memory, protected with built-in battery
Patients In Memory
• Max. 200 patients in memory (name, age, gender) with 10 test/patient
Measurement Procedures
• Kinetics, with linearity check
• Kinetics, with linearity check and blanking
• Two point kinetics, with or without reagent blank
• End point monochromatic or bichromatic, with or without reagent blank
• Coagulation
Measuring Time
• Programmable between 1 to 600 seconds for end-point methods and 2 to 600 for kinetics
Delay Time
• Programmable between 1 to 600 seconds
Calibration
• Factor, one-point, two-points and multi-points
• Automatic on 1 standard (linear mode)
• Automatic for up to 10 standards (non-linear mode)
Quality Control
• High/Low flags• On board statistical analysis and
Levey-Jennings plots• 5 control sets, 10 methods for control and 50
results for method: capacity of 2500 control values in memory
Operator Interface
• Membrane keypad with 25 buttons for function and numeric entries
• Graphic LCD, 240x128dot, 40x16 characters with backlight
• PC Keyboard (optional)
Printer
• Thermal graphic, 384 dots, 27 characters per inch
• Fast, quiet and heavy duty
Interface
• USB-B interface connector for PC connection• PS2 port for external keyboard• RS 232 Port for external printer or
PC text capture
Power Requirements
• 100-240 VAC 50/60 Hz,150W, earth grounded
Dimensions
• Size (Width x Depth x Height): 34 cm x 44 cm x 16 cm (13.4 in x 17.3 in x 6.3 in)
• Weight: 6 kg (13.2 lbs)
Your distributor
Description Catalogue No
Pictus B semi automated analyzer PBV3-1
We are at your service any time.
Diatron reserves the right to change any of the specifications without prior notice.Version Nr. PB150622V4 w w w . d i a t r o n . c o m