PHOTOSENSOR MODULE

H13229 SERIES / H14211 SERIES

Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications aresubject to change without notice. No patent rights are granted to any of the circuits described herein. ©2018 Hamamatsu Photonics K.K.

Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office.

H13229 series and H14211 series are photosenser modules that comprise a metal package PMT and high voltage power supply circuit. These make stable operation possible under vacuum or decom-pression environment. These provide low power consumption and low gas release by our manufacturing method and construction.

PRODUCT VARIATION

SPECIFICATIONS

Type No.H13229-110 / H13229P-110H13229-210 / H13229P-210H13229-01 / H13229P-01H13229-20H14211-110 / H14211P-110H14211-210 / H14211P-210H14211-01 / H14211P-01H14211-20H14211-04 / H14211P-04H14211-113 / H14211P-113

Spectral response300 nm to 700 nm300 nm to 700 nm300 nm to 870 nm300 nm to 920 nm230 nm to 700 nm230 nm to 700 nm230 nm to 870 nm230 nm to 920 nm185 nm to 870 nm185 nm to 700 nm

PhotocathodeSuper bialkaliUltra bialkaliMultialkali

Extended red multialkaliSuper bialkaliUltra bialkaliMultialkali

Extended red multialkaliMultialkali

Super bialkali

Window material

Borosilicate glass

UV glass

Notes

P type:for photon counting

*1 At +5 V input voltage, +1.0 V control voltage, and output current equal to dark current. *2 Control voltage = +1.0 V*3 These values are of a built-in PMT. There is a glass window which has 93 % transmittance in front of the PMT.*4 Measured at the peak sensitivity wavelength. *5 After 30 minutes storage in darkness output of dark current.*6 Cable RG174/U, cable length 450 mm, load resistance = 1 MΩ, load capacitance = 22 pF*7 The time required for the output to reach a stable level following a change in the control voltage from +1.0 V to +0.5 V. *8 No condensation

Min.Typ.Typ.Typ.Typ.Min.Typ.Typ.Typ.Max.Typ.Max.

Max.Max.

Input voltageMax. input voltageMax. input current *1

Max. output signal current *2

Max. control voltageRecommended control voltage adjustment rangeEffective areaPeak sensitivity wavelength

Luminous sensitivity

Blue sensitivity index (CS 5-58)Red/White ratioRadiant sensitivity *4

Luminous sensitivity *2

Radiant sensitivity *2*4

Dark current *2*5

P type dark count *2*5

Rise time *2

Ripple noise *2*6 (peak to peak)Settling time *7

Operating ambient temperature *8

Storage temperature *8

Working pressureWeight

4008010513.5—

11080210

2.2 × 105

11050100

40010013515.5—

130100270

2.6 × 105

11050

100

+2.8 to +5.5+5.52.7100

+1.1 (Input impedance 1 MΩ)+0.5 to +1.1 (Input impedance 1 MΩ)

8

0.570.510

+5 to +50-20 to +50

Atmospheric pressure to 0.001 Pa37

400100200—0.277

100400

1.5 × 105

110

6001000

Unit

VV

mAµAVV

mmnm

µA/lm

——

mA/W

A/lm

A/W

nA

s-1

nsmVs

°C°C—g

H13229-210H13229P-210

H13229-01H13229P-01

630350500—

0.4578

3501000

1.5 × 105

10100——

H13229-20H13229-110H13229P-110Parameter

Cat

hode

*3

Ano

de *

3

Stan

dard

type

●H13229 series

▲Left: H13229, Right: H14211

Operable under vacuum or decompression environment

PHOTOSENSOR MODULEH13229 SERIES / H14211 SERIES

*1 At +5 V input voltage, +1.0 V control voltage, and output current equal to dark current. *2 Control voltage = +1.0 V*3 Measured at the peak sensitivity wavelength. *4 After 30 minutes storage in darkness output of dark current.*5 Cable RG-316/U, cable length 450 mm, load resistance = 1 MΩ, load capacitance = 22 pF*6 The time required for the output to reach a stable level following a change in the control voltage from +1.0 V to +0.5 V. *7 No condensation

Min.Typ.Typ.Typ.Typ.Min.Typ.Typ.Typ.Max.Typ.Max.

Max.Max.

Input voltageMax. input voltageMax. input current *1

Max. output signal current *2

Max. control voltageRecommended control voltage adjustment rangeEffective areaPeak sensitivity wavelength

Luminous sensitivity

Blue sensitivity index (CS 5-58)Red/White ratioRadiant sensitivity *3

Luminous sensitivity *2

Radiant sensitivity *2*3

Dark current *2*4

P type dark count *2*4

Rise time *2

Ripple noise *2*5 (peak to peak)Settling time *6

Operating ambient temperature *7

Storage temperature *7

Working pressureWeight

4008010513.5—

11080210

2.2 × 105

11050100

40010013515.5—

130100270

2.6 × 105

11050

100

+2.8 to +5.0+5.52.7100

+1.1 (Input impedance 1 MΩ)+0.5 to +1.1 (Input impedance 1 MΩ)

8

0.571

10+5 to +50-20 to +50

Atmospheric pressure to 0.001 Pa74

400100200—0.277

100400

1.5 × 105

110

6001000

Unit

VV

mAµAVV

mmnm

µA/lm

——

mA/W

A/lm

A/W

nA

s-1

nsmVs

°C°C—g

H14211-210H14211P-210

H14211-01H14211P-01

400100200—0.277

100400

1.5 × 105

110

6001000

H14211-04H14211P-04

40080

10513.5—

11080

2102.2 × 105

11050

100

H14211-113H14211P-113

630350500—

0.4578

3501000

1.5 × 105

10100——

H14211-20H14211-110H14211P-110Parameter

Cat

hode

Ano

de

Stan

dard

type

SPECIFICATIONS●H14211 seriesThis product can change a built-in PMT upon request. Please consult with us.

Figure 1: Spectral response

2001000.1

1

10

100

1000

400 600

WAVELENGTH (nm)

CA

TH

OD

E R

AD

IAN

T S

EN

SIT

IVIT

Y (

mA

/W)

800 1000300 500 700 900

H14211-20

H14211-210

H14211-110H14211-113

H14211-04

H14211-01

0.1200100 300 400 500 600 700 800 900 1000

1

10

100

1000

WAVELENGTH (nm)

CA

TH

OD

E R

AD

IAN

T S

EN

SIT

IVIT

Y (

mA

/W)

H13229-20

H13229-210

H13229-110

H13229-01

Figure 2: Gain Figure 3: Sensitivity adjustment method

CONTROL VOLTAGE (V)

GA

IN

107

106

105

104

103

0.5 0.6 0.90.80.7 1.0 1.21.1

Figure 4: Typical output current v.s. input current

Figure 5: Typical output current v.s. input current

+5 VGND

+5 VGND

SIGNAL OUTPUTLOW VOLTAGE INPUT (RED)

GND (BLACK)Vref OUTPUT (BLUE)Vcont INPUT (WHITE)

PHOTOSENSOR MODULE POWER SUPPLY

POWER SUPPLYPHOTOSENSOR MODULE

+0.5 V to +1.1 V

SIGNAL OUTPUTLOW VOLTAGE INPUT (RED)

GND (BLACK)Vref OUTPUT (BLUE)Vcont INPUT (WHITE)

POTENTIOMETER (10 kΩ)

MONITOR

CW

GND

• Adjust the control voltage to adjust the sensitivity.

• Electrically insulate the reference voltage output.

RESISTANCE PROGRAMMING

VOLTAGE PROGRAMMING

* When using a potentiometer, adjust sensitivity while monitoring the control voltage so it does not exceed +1.1 V.

** When input voltage is +4 V or less, please set resistance of potentiometer to 100 kΩ.

0

20

40

60

80

100

120

0 2 4 6 8 10 12 14 16 18 20 22 24

RE

LAT

IVE

OU

TP

UT

CU

RR

EN

T (

%)

TIME (h)

100 Pa0.001 PaAtmospheric pressure

[Conditions]Supply voltage: +5 VControl voltage: +1.1 VInitial output current: 100 µA

0 20 40 60 80 1000

2

4

6

8

10

OUTPUT CURRENT (µA)

INP

UT

CU

RR

EN

T (

mA

)

INPUT VOLTAGE: +5 VCONTROL VOLTAGE: +1.0 V

TPMO1086E01OCT. 2018 IP

PHOTOSENSOR MODULEH13229 SERIES / H14211 SERIES

HAMAMATSU PHOTONICS K.K.HAMAMATSU PHOTONICS K.K., Electron Tube Division 314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205

www.hamamatsu.com

U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater, NJ 08807, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: usa@hamamatsu.comGermany: Hamamatsu Photonics Deutschland GmbH.: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-265-8 E-mail: info@hamamatsu.deFrance: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: infos@hamamatsu.frUnited Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court,10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, UK, Telephone: (44)1707-294888, Fax: (44)1707-325777 E-mail: info@hamamatsu.co.ukNorth Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 16440 Kista, Sweden, Telephone: (46)8-509 031 00, Fax: (46)8-509 031 01 E-mail: info@hamamatsu.seItaly: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: (39)02-93 58 17 33, Fax: (39)02-93 58 17 41 E-mail: info@hamamatsu.itChina: Hamamatsu Photonics (China) Co., Ltd.: 1201 Tower B, Jiaming Center, 27 Dongsanhuan Beilu, Chaoyang District, 100020 Beijing, China, Telephone: (86)10-6586-6006, Fax: (86)10-6586-2866 E-mail: hpc@hamamatsu.com.cnTaiwan: Hamamatsu Photonics Taiwan Co., Ltd.: 8F-3, No.158, Section2, Gongdao 5th Road, East District, Hsinchu, 300, Taiwan R.O.C. Telephone: (886)03-659-0080, Fax: (886)03-659-0081 E-mail: info@hamamatsu.com.tw

Figure 6: Dimensional outline (Unit: mm)

●H13229 series

●H14211 series

FRONT VIEW SIDE VIEW

LOW VOLTAGE INPUT (+5 V)GNDVcont INPUT (0.5 V to 1.1 V)Vref OUTPUT (+1.2 V)

Red:Black:White:Blue:

WINDOW

SIGNAL OUTPUTRG-316/U

24 4 × M2 DEPTH 5

EFFECTIVE AREA ( 8 MIN.)

10

30.

0 ±

0.1

1

56.5 ± 0.5 450 ± 20 10 5

POWER INPUT CABLE, TFE

FRONT VIEW SIDE VIEW BOTTOM VIEW

EFFECTIVE AREA ( 8 MIN.)

18.6 1.7

10.16

5.08

97

102

21.5

GLASS CASE

1:7:8:9:

10:12:

Others:

Vcont INPUT (+0.5 V to +1.1 V) LOW VOLTAGE INPUT (+5 V) Vref OUTPUT (+1.2 V)SIGNAL GNDSIGNAL OUTPUTGNDNOT CONNECTED

Guide mark

12 × 0.45

1 2 3

9 8 7

456

121110

WINDOW

10.1

6

5.08