phd in civil engineering - vrije universiteit brussels ... · 2006 - 2013 head of the structural...
TRANSCRIPT
PIERRE LATTEUR, PhD Associate professor – UCL/Louvain School of Engineering (since Sept. 2013) Part-time associate Professor – ULg/University of Liège (since 2001) Phd in Civil Engineering - Vrije Universiteit Brussels (2000) Civil Engineer (Construction) - Université catholique de Louvain UCL/Belgium (1994)
_________________________________________________________
CV LATTEUR Pierre – May 2018 Page 1-30
NAME/FIRST NAME: Latteur, Pierre
CONTACT: [email protected]
DOMICILE: Belgium
DATE OF BIRTH: 23 December 1969
NATIONALITY: Belgian
FAMILY STATUS: Married to Dominique (Civil engineer architect), 2 children: Shima (born in 2006) and Maxime (born in 2009)
SPECIALISATION: Civil/Structural Engineering
CURRENT POSITIONS _____________________________________________________________________________________________________
Since 2013 Associate Professor, Université catholique de Louvain UCL/Louvain School of Engineering EPL- research institute IMMC. Head of Civil and environmental engineering Dpt since 2015. See details in Annex 1 (teaching, research, etc.). https://uclouvain.be.
Since 2001 Part-time Associate Professor, University of Liège/ULg (Faculty of Bioengineering), in charge of the courses Strength of Materials and General Construction Processes, http://www.uliege.be.
PAST POSITIONS _____________________________________________________________________________________________________
2006 - 2013 Head of the Structural Engineering Dpt at GDFSUEZ/Tractebel Engineering/TTE Brussels. The team had about 20-25 civil engineers and draftsmen (see project references in Annex 2). http://www.tractebel-engie.com/.
1999 - 2006 Structural Engineer and Project Manager at SETESCO structural engineers, Brussels (www.setesco.be).
1999 - 2003 Guest lecturer, Ecole centrale des arts et métiers ECAM (Brussels : http://www.ecam.be).
1999 Guest researcher (6 months), EPFL in Switzerland (www.epfl.ch, with Prof. Frey, now retired).
1998-1999 Architects Samyn&Partners (https://samynandpartners.com), part-time position (for the access to the profession of architect).
1994-1999 Assistant (structural engineering, strength of materials, concrete engineering) and research assistant at the Laboratory of Civil Engineering in the field of buildings survey/structural faults&repair.
QUALIFICATIONS _____________________________________________________________________________________________________
2000 PhD in Civil Engineering, Vrije Universiteit Brussel (www.vub.ac.be), 2000. Subject : optimization of structures.
1994 Civil Engineer (Constructions), Université catholique de Louvain (https://uclouvain.be), 1994. Erasmus program of 6 months at the Delft University of Technology in the Netherlands (http://www.tudelft.nl).
CV PIERRE LATTEUR
_________________________________________________________
CV LATTEUR Pierre – May 2018 Page 2-30
LANGUAGES ___________________________________________________________________________________________________
French : Mother tongue.
English : Very good (C1 level).
Dutch : Average but adequate for professional needs.
DETAILED ACTIVITIES SINCE MY APPOINTMENT AT THE UCL IN SEPTEMBER 2013 ______________________________________________________________________________________________________
SEE ANNEX 1 : teaching, research, services to the University, responsibilities, expertises,…
15 YEARS EXPERIENCE IN STRUCTURAL ENGINEERING OFFICES (ACTIVITIES BEFORE MY APPOINTMENT AT THE UCL IN SEPTEMBER 2013) ______________________________________________________________________________________________________
SEE ANNEX 2 : my references related to projects such as buildings, architectural structures, bridges, industrial structures as design engineer, project manager and head of department.
AWARDS : _____________________________________________________________________________________________________
2017 Ranked among the 50 Belgian “Techpionners” by the newspaper “De Tijd”. http://multimedia.tijd.be/techpioniers/
2014 Best summer courses, course ranked at the 3rd position among 54 European summer courses.
2000 Louis Baes Award, awarded at a public session at the Royal Belgian Academy, ”Classe des Sciences”, and received for the PhD thesis.
1999 Earth Science Systems Research Award, awarding a scientific publication presented during the international congress “Structural Faults and Repair” at the London Commonwealth Institute.
1996 Pedagogy Award from the Department of Applied Sciences of the Université Catholique de Louvain/Belgium.
HOBBIES _____________________________________________________________________________________________________
Gardening, hiking, sailing, piloting drones (Class 1 Drone Pilot License in 2018).
HAS TRAVELLED IN : _____________________________________________________________________________________________________
Acores (Sao Miguel, Pico, Faial, Terceira, Flores, Corvo), Australia, Austria, Brazil, Capo Verde (Sal, Boa Vista), Canarias islands (Tenerife, La Gomera, El Hierro), Czech Republic, Corsica, Dominique, France, French Antilles (Guadeloupe, Marie Galante, Les Saintes, Martinique), Germany, Ireland, Italy (including Sardinia, Sicilia, Pantelleria), Luxembourg, Morocco, Mexico, The Netherlands, New Zealand, Poland, Portugal, Sainte Lucie, Saint Vincent and the Grenadines (including Bequia et Canouan), Senegal, Spain (including Majorca and Minorca), Sri Lanka, Switzerland, Tunisia (including Djerba and La Galite), Turkey, UK, USA (Est coast).
CV PIERRE LATTEUR
_________________________________________________________
CV LATTEUR Pierre – May 2018 Page 3-30
ANNEX 1 :
DETAILED ACTIVITIES SINCE MY APPOINTMENT AT THE UCL IN SEPTEMBER 2013
CV PIERRE LATTEUR
_________________________________________________________
CV LATTEUR Pierre – May 2018 Page 4-30
CV PIERRE LATTEUR
_________________________________________________________
CV LATTEUR Pierre – May 2018 Page 5-30
A1.1. TEACHING
The « Timber
project », developed
since 2014 with my
BAC3 students (civil
engineers and
engineers architects)
CV PIERRE LATTEUR
_________________________________________________________
CV LATTEUR Pierre – May 2018 Page 6-30
IN CHARGE OF THE FOLLOWING COURSES :
Note: my course notes can be downloaded from page http://www.issd.be/CoursLatteur.html
Mechanics of structures, holder (60h, 5 ECTS) since 2013-2014.
Stability of constructions, holder (35h, 3 ECTS) since 2013-2014 (30h-30h, 5 ECTS from 2016-2017 on).
Timber Engineering, holder (30h, 3 ECTS) since 2014-2015.
Building project (70h, 6 ECTS), manager and co-holder (for 36%=25h) since 2014-2015.
Bridge project (70h, 6 ECTS), co-holder (for 21%, 15h) since 2014-2015.
Timber project (45h, 4 ECTS), manager and co-holder (for 50%, 22,5h) since 2013-2014:
5 min video over the 2016-2017 project : https://podcast.uclouvain.be/kyxzi6B2mn 5 min video over the 2014-2015 project : http://podcast.uclouvain.be/HV3409nlrV
5 min video over the 2013-2014 project : http://podcast.uclouvain.be/ciQk8VjSmW
Innovation classes (45h, 5 ECTS), co-holder (for 33%, 15h) since 2015-2016:
Video in English explaining the course (3 min) : https://podcast.uclouvain.be/rL7HtIQiFU
Strength of materials/ULg course, holder (36h, 3 ECTS) since 2001.
Construction processes/ULg course, holder (36h, 3 ECTS) since 2001.
TRAININGS FOLLOWED :
2015 Multiple choice evaluations (UCL/LLL, 4h).
2013 Innovation and creativity according to the TRIZ method (UCL, 2x8h).
TALKS AND SPECIAL COURSES :
2014 In charge of a “European Best Summer Course”, given to 20 students from 12 different nationalities during 10 days (subject : “how to built structures”).
Talk on the subject “The student project: evaluation of the apprenticeship or the final production ?”, Louvain School of Engineering pedagogical day on the subject “pedagogical innovations, yes but why?”.
2013-2014 2014-2015 2015-2016 2016-2017 2017-2018
Mechanics of structures 100 104 110 104 184
Stability of constructions ? 46 59 90 78
Timber Engineering 46 43 83 55
Building project 38 40 66 32
Timber project 45 43 56 43 39
Bridge project 23 29 30 31
Innovation classes 16 21 28
2013-2014 2014-2015 2015-2016 2016-2017 2017-2018
Strength of materials 90 90 90 90 93
Construction processes 32
Number of students at my UCL courses since 2013-2014 (Civil engineers and architect engineers)
Number of students at my ULg courses since 2013-2014 (Bio-engineers)
CV PIERRE LATTEUR
_________________________________________________________
CV LATTEUR Pierre – May 2018 Page 7-30
PERSONAL AWARDS OR AWARDS TO MY STUDENTS :
2016 J. Feron received the AILV award for innovation for his end master thesis during the graduation ceremony (AILV=Engineering School Alumni Association).
G. Bastin and Simon Berwart received the AILV award for universality for their end master thesis during the graduation ceremony.
2014 Course BEST ranked 3rd out of 54 international courses.
BOOKS PUBLISHED :
2016 “Calculer une structure, de la théorie à l'exemple”, 4th revised edition, L’Harmattan/Academia editors, Louvain-la-Neuve, (1rst édition Sept. 2006), 488 pages, ISBN 978-8061-0270-6. http://www.issd.be/Lelivre.php.
GRANTS :
2014 “Retour TVA UCL”. Development of a test bench for structures for students (5000 euros).
Since 2013 Private funding for the “Timber project” (BAC3 students), (3000 euros/year given by companies
Valens and Scia).
PRESS ARTICLES :
2017 National TV report, Quel Temps, about project P4 with students (Observation tower for lifeguards).
https://www.rtbf.be/auvio/detail_quel-temps?id=2215621
2016 Vers l’Avenir newspaper, Timber Project (suspended hamac).
Polytech Louvain, n°6, “Students at the MIT Structural Design Lab”.
2015 Vers l’avenir newspaper, Timber Project (footbridge).
http://www.lavenir.net/cnt/DMF20150506_00644382
PROMOTOR OR COPROMOTOR OF THE FOLLOWING END MASTER THESIS :
2017-2018 "Développement d’une application JAVA permettant de couvrir le dimensionnement de structures en bois sur base d’une reformulation adimensionnelle des critères de l’EC5 », Moeremans B.
"Conception paramétrique de structures architecturales en bois drone-compatibles ", De Beusscher G., Rogeaux N.
Note: this thesis received the AILV Innovation and best presentation Awards during the graduation ceremony in June 2018.
"Développement de structures composées de droxels", Mullier M.
"Application structurale du hêtre modifié thermiquement : étude de faisabilité", Himmer B., Rouard E.
"Tour d’horizon des structures en bois de l’Antiquité à nos jours : Analyse de l’efficience des structures selon l’EC5", Demaré S., Moens de Hase A.
"Etablissement d’un plan d’affaire du projet Fodalytics visant à développer un système d’aide à la détection de FOD dans les aéroports (Mémoire CPME), Manja D., Mouchet M., Renard M.
"Etude et développement d’éléments de maçonnerie « drone-compatibles » industrialisables", Deneffe G.
"Development of a local positioning system for builder drones with image processing", Jacques T., Kaczynski F.
CV PIERRE LATTEUR
_________________________________________________________
CV LATTEUR Pierre – May 2018 Page 8-30
"Development of a guidance and automatic positioning system for builder drones with a theodolite", Sorensen N., Vermeiren R.
2016-2017 "Réalisation d’un « logididacticiel » pour le calcul dynamique des structures", Van der Alst G.
"Analysis of the dynamic interaction between a footbridge and pedestrians. Application to the new footbridge of Louvain-la-Neuve", Pisani M.
"Calcul numérique non linéaire des structures de tenségrité", Boucher L.
"Développement d’un mode constructif «drone compatible» pour la construction d’habitations unifamiliales en bois », de Furstenberg T, Manderlier C.
"Intégration de paramètres durables dans la modélisation BIM », de Hemptine A, Lassaux R., copromoteur Vandenbergh T. (Besix-UCL).
"Conception d’un système porteur pour bâtiment multi-étagé en hêtre compatible avec une préfabrication robotisée", Rochez C., Vinel A., copromoteur J.P. Jasienski (Loci).
"Développement d’un mode constructif «drone compatible» pour la construction d’habitations unifamiliales en maçonnerie et en béton", Leboutte J.F., Parisel V.
"Intégration de la construction « drone compatible » au sein d’un modèle BIM», Branders A.S., Bruneau A.
"Shear and axial resistance of Multiple Tab-and-Slot Joint (MTSJ) connections with application to timber plate shells", Ghion G, mémoire en copromotion avec le prof Y. Weinand de l’EPFL.
2015-2016 "Conception d’une installation d’agriculture indoor pour une ville flottante de Micronésie", Bauthier C., copromoteur Lebeau F. (ULg).
"Développement de maçonneries compatibles avec une construction par drones", Moncourrier A., Naveau A.
"Développement d’un système de guidage automatique des drones à l’aide de capteurs lasers embarqués", Nehri N., Paques A., copromoteur Marchand C (ECAM).
"Développement d’une interface BIM pour la construction maçonnée à l’aide de drones", Reniers M.
"Bilan économique et énergétique de la construction avec les drones", Coppieters de Gibson C.
"Sécurité des ouvrages temporaires", Vandriessche C., en collaboration avec le CSTC.
"Calcul des panneaux de CLT comportant des découpes et motifs", Sergio M., en collaboration avec le bureau d’études WOW.
"Développement d’un concept de tiny house basé sur une structure préfabriquée en acier formé à froid", Randhaxe J., en collaboration avec l’entreprise Be-Steel.
"Etude de faisabilité d’une île flottante pour les réfugiés climatiques de Micronésie – partie 1", Bastin G., Berwart S.
Note : this thesis received the AILV Universality Award during the graduation ceremony in June 2016.
"Etude de faisabilité d’une île flottante pour les réfugiés climatiques de Micronésie – partie 2", Van Cutsem R., Van Puyvelde C.
"Développement d’un algorithme d’optimisation des structures de tenségrité basé sur les indicateurs morphologiques", Feron J.
Note : this thesis received the AILV Innovation Award during the graduation ceremony in June 2016.
"Etude de l’influence des cycles gel-dégel sur les caractéristiques du béton", Van Hoye T., en collaboration avec le CRIC.
"Etude expérimentale de l’influence des fentes sur les caractéristiques mécaniques des éléments porteurs en bois", Geno J.
"Etude numérique de l’influence des fentes sur les caractéristiques mécaniques des éléments porteurs en bois", Patiny M.
CV PIERRE LATTEUR
_________________________________________________________
CV LATTEUR Pierre – May 2018 Page 9-30
2014-2015 "Calcul non-linéaire des structures de tenségrité", Eliars M.
"Etude d’un système constructif adapté à la construction préfabriquée en bois d’un bâtiment de kots de 4 niveaux", Chachanovski Y., Lejeune T. (Buiding developed by the sudents visible on video : http://podcast.uclouvain.be/epoiv00yVU)
"Etude paramétrique de l’influence de la T° et de la précontrainte sur les structures en béton des réservoirs d’ammoniaque", Poncin P.
"Faisabilité de la construction d’ouvrages avec les drones", Breton J.-S., Leplat J.
"Analyse du fluage et du retrait dans les dalles en béton fibré", Colin P.
"Ferraillage des massifs en béton armé sur base d’une analyse par contraintes", Lespagnard A.
"Etude d’un système constructif de bâtiments multi-étagés à ossature métallique formée à froid", D’hondt S.
"Ferraillage des massifs en béton armé sur base d’une analyse par contraintes", Ansriou M., copromoteur Ouaar A. (ECAM).
2013-2014 "Caractérisation du bois de hêtre pour les applications structurales", Debleser E., Schumacher J.
"Influence des fentes dans le comportement des éléments structuraux en bois", Dehombreux F.-X., Guislain B.
"Optimisation des structures de tenségrité", Bastien A, Gravy Q. (Passerelle développée visible en vidéo sur : http://podcast.uclouvain.be/AVe8eDeJWN)
MISCELLANEOUS :
2017 Responsible of the graduation trip of end master students in civil engineering (Poland, 1 week).
2016 Supervision of an initiative student project related to the design of a timber footbridge in the Lauzelle Forest near Louvain-la-Neuve (student J. Geno, EPL, Ms22)
2014 Responsible of the graduation trip of end master students in civil engineering (Turkey, 1 week).
CV PIERRE LATTEUR
_________________________________________________________
CV LATTEUR Pierre – May 2018 Page 10-30
A1.2. RESEARCH
CV PIERRE LATTEUR
_________________________________________________________
CV LATTEUR Pierre – May 2018 Page 11-30
GRANTS :
2017 MISTI-MIT-UCL Seed Fund (24.000 US dollars over 2 years). Allows students and researchers
exchanges between MIT/Boston and UCL in the field of the research project “Drone-based
Construction of Timber Space Structures” (In collaboration with the Massachusetts Institute of
Technology/USA/professor Caitlin Mueller).
2016 “Constructive Beech Wood Project», granted by private company MOBIC, specialized in the
construction of timber houses and structures. Total budget 150.000 euros (2 years). Subject:
development of a robotized beech wood based multi-storey concept.
FSR 2 years second grant for researcher Elke Mergny (subject: influence of cracks on the structural
characteristics of timber construction elements).
FNRS/CDR Grant. Subject : « Drone based construction «. Budget 45.000 euros over 2 years.
“Retour TVA UCL”. Development of the UCL DroneZone, a 600 m3 indoor flght area for drones used
for research puporses. Budget 19.000 euros.
Project DOLRE/Mecatech/Walloon Regional Government, in collaboration with lab LEMSC (UCL),
ULg and companies Desamil, GDtech et JLM. Budget 1.261.000 euros over 4 years (UCL budget
304.000 euros). Subject : Development of safety barriers / guardrails with diffusion of impact forces
into bridge decks.
2015 MISTI-MIT-UCL Seed Fund (30.000 euros over 2 years). Allows students and researchers
exchanges between MIT/Boston and UCL in the field of the research project “Drone-based additive
Manufacturing of Architectural Structures” (In collaboration with the Massachusetts Institute of
Technology/USA/professor Caitlin Mueller).
2014 FSR 2 years first grant for researcher Elke Mergny (subject: influence of cracks on the structural
characteristics of timber construction elements).
RESEARCH STAYS :
Summer 2016 6 weeks stay (with one of my researchers and 2 end master students) at MIT/Boston/USA
(Massachusetts Institute of Technology) thanks to a MIT-UCL seed fund linked to the drone-based
construction.
SUPERVISION OF PHD THESIS :
Since 2018 Member of the supervision board for Mustafa Jafari, researcher at the UCL (Subject: Reducing
Uncertainties Related to the Dynamic Load Test for Pile Foundations).
Since 2017 Member of the supervision board for Haytem gharsallaoui, researcher at the UCL (Subject: Piles
dynamic behavior).
Since 2015 Member of the supervision board for Coralie Avez, researcher at the Polytechnic Faculty of the
University of Mons (Subject: CLT timber construction).
Since 2014 Promotor of Sébastien Goessens, Phd student. Subject: “Drone-based additive manufacturing of
structures”.
2014-2016 Supervisor of Elke Mergny, FSR researcher. Subject: subject: influence of cracks on the structural
characteristics of timber construction elements. Note: this researcher, although having received a
renewal of scholarship in Sept. 2016, resigned.
CV PIERRE LATTEUR
_________________________________________________________
CV LATTEUR Pierre – May 2018 Page 12-30
PUBLICATIONS :
2018 [Accepted] Goessens S., Müeller C., Latteur P., “Feasibility study for drone-based masonry construction of real-scale structures”, Automation in Construction Journal.
Chaltiel S., Bravo M., Goessens S., Latteur P, Mansouri M., Ahmad I., “Dry and Liquid clay mix drone
spraying for Bioshotcrete”, International Association for Shell and Spatial Structures, Boston, 16-20 July 2018.
Blonder A., Grobman J., Latteur P., “Pleated Facades: Layered Fabric Materiality in FRP Surface
Elements”, International Association for Shell and Spatial Structures, Boston, 16-20 July 2018. Goessens S., Rogeau N., De Beusscher G., Mueller C., Latteur P., “Parametric Design of Drone-
Compatible, Architectural Timber Structures”, International Association for Shell and Spatial Structures, Boston, 16-20 July 2018.
[Submitted] Feron J., Boucher L., Latteur P., “Optimization of footbridges composed of prismatic tensegrity modules”, Journal of Bridge Engineering , ASCE. Descamps T., Monhonval M., Latteur P., “An assessment methodology for timber beams in a restoration context, based on a dimensionless formulation of EC5 design criteria”, International Journal of Architectural Heritage, DOI: 10.1080/15583058.2018.1442527.
2017 Latteur Pierre, Feron Jonas, Denoël Vincent, “A design methodology for lattice and tensegrity
structures based on a stiffness and volume optimization algorithm using morphological indicators”, International Journal of Space Structures, Volume 32, issue: 3-4, p. 226-243.
Goessens Sébastien, de Furstenberg Tassilo, Manderlier Charline, Mueller Caitlin, Latteur Pierre, “A
Few Aspects of Timber UAV-based Construction”, International Association for Shell and Spatial Structures, Hambourg, 25-29 September 2017.
Nehri Nabil, Pâques Alexis, Marchand Cédric, Goessens Sébastien, Mueller Caitlin, Latteur Pierre,
“Système de guidage d’un drone à l’aide de capteurs embarqués, destiné à la construction
automatique d’ouvrages en maçonnerie”, Revue scientifique des ISILF (Belgium).
2016 Latteur Pierre, Goessens Sébastien, Reniers Milan, Ma Zhao, Mueller Caitlin, “Masonry Construction
with drones”, International Association for Shell and Spatial Structures, Tokyo, 26-30 September
2016.
Mergny Elke, Mateo Raquel, Esteban Miguel, Descamps Thierry, Latteur Pierre, “Influence of cracks in timber structural elements: a numerical approach”, World Conference in Timber Engineering, Vienna (Austria), 22-25 August 2016.
Ma Zhao, Latteur Pierre, Mueller Caitlin, “Grammar-based Rhombic Polyhedral Multi-Directional
Joints and Corresponding Lattices”, International Association for Shell and Spatial Structures, Tokyo,
26-30 September 2016.
Goessens Sébastien, Mueller Caitlin, Latteur Pierre, « Vers une robonumérisation de la
construction », RUGC, Liège, 25-26-27 May 2016.
2015 Latteur Pierre, Goessens Sébastien, Breton Jean-Sébastien, Leplat Justin, Ma Zhao, Mueller Caitlin,
“Drone-Based Additive Manufacturing of Architectural Structures”, International Association for Shell
and Spatial Structures, Amsterdam, 17-20 August 2015.
Mergny Elke, Ansriou Mohamed, Lespagnard Adrien, Ouaar Amine, Latteur Pierre, “The Use of
Stress Analysis for the Reinforcement of Concrete Massive Structures, Compatible with Building
Methods”, International Association for Shell and Spatial Structures, Amsterdam, 17-20 August 2015.
CV PIERRE LATTEUR
_________________________________________________________
CV LATTEUR Pierre – May 2018 Page 13-30
Mergny Elke, Poncin Pierre, Bertin Renaud, Latteur Pierre, “Description of a design method for
cryogenic concrete tanks based on a comparison between 2D and 3D numerical models”,
“International Conference on Shells, Plates and Beams”, Bologna, 9-11 September 2015.
Latteur Pierre, Soares Sandra, Ducarme Delphine, “Apprentissage par projet : évaluation certificative
en cours de projet ou à la fin ?”, Questions de pédagogies dans l’enseignement supérieur, QPES,
Colloque 2015, Brest (France).
2014 Mergny Elke, Kaddouri Noreddine, Vassart Olivier, Latteur Pierre, “A comparative study of “Elastic-
Elastic” and “Plastic-Plastic” Design of Steel Frames”, IASS-SLTE 2014 Symposium, Brasilia
(Brazil), index 222, 8 pages.
PRESS ARTICLES ABOUT MY RESEARCHES :
2017 Polytech Louvain magazine, « des briques et des ailes »
Luxemburger Wort newspaper, “Die Baustelle der Zukunft”
Neo Magazine, IFSB Luxembourg, “Quand des robots construisent nos maisons…”
Le Soir newspaper, “Les drones, futurs alliés de la construction ?”,
2016 JT, National television RTBF, TV reportage: https://podcast.uclouvain.be/oqtFpph5li
National television RTBF, TV reportage “Quel Temps”: https://podcast.uclouvain.be/2oDnSWhRHe.
Vers l’Avenir (newspaper): “UCL : they want to develop builder drones!”.
Antipode, radio reportage about the UCL DroneZone.
UCL/ Louvain newspaper: “The new builders”.
2015 UCL/ Louvain newspaper: “Les drones débarquent à l’UCL”.
MISCELLANEOUS :
2015 Invited at the INSA Rennes as jury member for an abilitation to lead researches (Mr H. Somja, Construction acier, mixte et hybride sous charge de service et sollicitations sismiques).
CV PIERRE LATTEUR
_________________________________________________________
CV LATTEUR Pierre – May 2018 Page 14-30
A1.3. SERVICES TO THE UNIVERSITY, RESPONSIBILITIES, EXPERTISE, …
DEVELOPMENT OF CONTINUOUS TRAINING PROGRAMS :
Since 2017 “BIM, Integrated Design and Management". Continuous training for professionals (architects and engineers). 2 times 2 weeks in residential, with numerous national and international experts as trainers. Subvention of 63,000 euros awarded by the Eurometropolitan Ecampus. Complete training with 24 participants foreseen for 2017. Co-organization with the UCL Faculty of Architecture (Prof. J.P. Couwenbergh). https://uclouvain.be/fr/etudier/actualites/certificat-bim-fini-les-erreurs-sur-chantier.html
EXPERTISES :
Since 2014 Expert for the the Awirs tailing pile (belonging to Electrabel company and constituting a threat to the downstream village). Financial intake 5500 euros / year.
See https://www.youtube.com/watch?v=6Ju3rzYw3-k.
2016 Expert for the rehabilitation and support of a remarkable tree classified by the City of Mons (in collaboration with engineering office MC2). Financial intake 1000 euros.
RESPONSIBILITIES AT THE UCL :
Since 2016 Chairman of the management committee of the LEMSC platform (UCL Laboratory for mechanics
and civil engineering – staff 12 people).
Since 2015 Head of Civil and Environmental Department (part of the research institute IMMC).
RESPONSIBILITIES OUTSIDE THE UCL :
Since 2015 Member of the working group "Universities" of ADEB (association of the biggest construction
companies in Belgium).
Member of the Belgian standardization committee of Eurocode 5 (Eurocode Bois).
Since 2014 Member of the "Innovation working group” at the “Office Economique Wallon du Bois”.
ORGANIZATION OF CONFERENCES :
2017 UCL. Co-organization with research assistant S. Goessens, and moderator, of the national conference on the theme "Drone and research at University" (meeting of the Belgian university researchers using drones for their research). 31 May 2017, Louvain-la-Neuve. 70 participants.
2016 Moderator and co-organizer (with prof T. Descamps from Umons) of the conference "Introduction to
Cross laminated Timber Design and Architecture" at the University of Mons. FNRS grant of 2630
euros. 65 participants.
2015 Organizer of the conference "Multi-Storey Timber Construction: Future Developments in Belgium?",
at the UCL. Collaboration with FABI and CSTC, in partnership with the ULg, Umons, OEWB,
Houtinfobois and the Belgian Federation of Construction. FNRS grant of 3000 euros, sponsorship
from 6 companies of 4500 euros. 200 participants.
UCL, organizer of the exhibition "Timber Project" from EPFL (Professor Y. Weinand).
UCL. Co-organization, with research assistant S. Goessens, of the "Drone Research Workshop" (meeting of all UCL researchers using drones).
CV PIERRE LATTEUR
_________________________________________________________
CV LATTEUR Pierre – May 2018 Page 15-30
GUEST FOR CONFERENCES/TALKS/DEMONSTRATIONS :
2017 IFSB/CDEC Luxembourg 15 year birthday, “Chantier du futur”, in front of the Luxembourg prime Minister and the “Grand Duc héritier”, speech and demonstration of a drone building a masonry wall.
European Parliament, Brussels, invited as speaker by Construction Products Europe AISBL for a
conference on “High-tech evolution in construction”, title : “Building with drones”. https://www.youtube.com/watch?v=RbB8e5EKX4k
2016 University of Leuven KUL, STATIX association of civil engineering students, conference on the theme "Innovation in construction: from BIM to drones".
CSTC summer University on the theme "Building at the digital age", site of ECAM/Brussels, demonstration of our “builder drone” in front of 300 people from various construction companies.
UCL, event for the commemoration of the exchanges between MIT/Boston and UCL, presentation with prof. Caitlin Mueller concerning our common research project "Drone-Based Manufacturing of Architectural Structures", followed by a demonstration with our “builder drone”.
MIT/Boston, during a 6-week research stay, talk about an overview of my teaching and research activities (public: students, researchers and academics).
Cercle du Lac (private club for entrepreneurs), Louvain-la-Neuve, conference on the theme «Building our cities with drones : utopia or reality ?».
TEDx Louvain-la-Neuve, talk on the theme « Building our cities with drones…a utopia? ». https://www.youtube.com/watch?v=tn9SnXz-c4g.
Annual Brussels drone event, first public demonstration of our drone builder, with the presence of
the Minister of Mobility.
MISCELLANEOUS :
2017 Member of the selection committee for a new professor of building technology at the UCL Faculty of architecture.
Invited to the « café in vitro » public and radio debate over biomimetism, PointCulture, Louvain-la- Neuve.
2016 Member of the selection committee for a new professor of structural engineering at the UCL Faculty of architecture.
Theoretical and practical training in the piloting of drones (3 days of theory, 3 half-days of practice
(organized by Espace Drone Belgium).
Since 2015 One-day course about "Fire and Timber Construction - Applications of Eurocode 5", as part of
"Timber Construction " UCL continuous training program for architects and engineers.
Invited at the student program advisory board of the Polytechnic Faculty of Mons (Civil Engineers
architects).
2015 Member of the selection committee for a new professor of structural engineering at the UCL Faculty of architecture.
Invited to the "Solve for x" event organized by Google in Berlin (Humboldt Carré, 3 Sept. 2015).
CV PIERRE LATTEUR
_________________________________________________________
CV LATTEUR Pierre – May 2018 Page 16-30
ANNEX 2 :
15 YEARS EXPERIENCE ON CONSTRUCTION PROJECTS
DETAILED ACTIVITIES BEFORE MY APPOINTMENT AT THE UCL IN SEPTEMBER 2013
CV PIERRE LATTEUR
_________________________________________________________
CV LATTEUR Pierre – May 2018 Page 17-30
A2.1. MOST RELEVANT PROJECTS
PLASE FIND IN A2.2 PHOTOS RELATED TO A FEW OF THESE PROJETS [1, 2, …]
2007 to 2013 BELGIQUE – GDFSUEZ/TRACTEBEL ENGINEERING Supervision or technical coordination of the following projects as head of dpt :
Data center BNP Paribas (full mission and execution studies for the construction of 2 data centers in Belgium-Bastogne and Vaux, 5000 m2).
Nuclear Plant of Tihange (full mission and execution studies for the construction an anti-flood 2 km long wall in order to protect the plant against floods of the river Meuse). [1]
Commercial center Namur (Pilot study - 70.000 m2).
Extension of the commercial center Mons Grand Prés (Full mission -14.000 m2).
HVAC buildings Elia de Butgenbach et Fosse, various industrial small buildings) (execution studies).
GDF-SUEZ Data Center Spy/Crealys, concrete building (complete mission).
Power plant d’Amercoeur 2 (execution studies for the new plant, steel and concrete structures).
Destruction of a 50 m high building (finite element model) [2]
Seismic study of the new Tihange nuclear plant access building (finite element model).
Footbridge in Verviers (Tender only, for a competition). [3]
Zeebrugge gas terminal/Jetty (Design of the Jetty structures and explosive yield calculations).
GDF SUEZ Data Centre – Spy Crealys centre (concrete building - full mission).
Cooling tower of Ruien power plant (Expertise and complex FE modelling). [4]
Acces building at Tihange nuclear plant - BCA (concrete building - full mission). [5]
Saint Illier gas site – industrial buildings (Studies and execution plans). [6]
Fos Tonkin natural gas terminal (Feasibility studies for renovation – technical specifications). [7]
Wind turbine foundations for Electrabel (Studies, including fatigue calculations and execution plans). A variety of projects in Leuze-en-Hainaut, Zeebrugge harbour and Volvo Cars sites. [8]
Doel Diesel building(Reinforced concrete building with a criss-cross shell, full mission).
Car park at the GSK plant (Reinforced concrete building with a pre-fabricated structure).
Renovation of the IBM/Project Phoenix building (Metal reinforcing structures below ground level).
New future EPR/nuclear power stations projects (Civil engineering technical specifications only).
Kreffel Mons building (Reinforced concrete building with a pre-fabricated structure : studies only).
Nallo building (Reinforced concrete structured Call-centre : full mission).
Diabolo/Wisselzone + Viaduc Link (Large-scale civil engineering works with post-stressed concrete structures : full mission). [9]
Josaphat Link (Reinforcing plans for Galère/De Null).
Zandvliedt/BASF plant (Metal protective structure for transformers: full mission). [10]
Renovation of a building at the GSK site of Wavre (New floors suspended from the existing structure).
EVN/HLR and EVN/MRS buildings at Liège (Reinforced concrete buildings: full mission).
Museum building at the Waterloo memorial site (Embedded reinforced concrete building: full mission).
CV PIERRE LATTEUR
_________________________________________________________
CV LATTEUR Pierre – May 2018 Page 18-30
Nallo Car park at Gosselies (Reinforced concrete building in with a pre-fabricated structure: full mission).
Sita storage basins at Curgies (Reinforced concrete basins with metal roof: studies).
Project for storage of radioactive waste at Dessel (Metallic and reinforced concrete structure with complex modelizations). [11]
Victor Hugo Project at Brussels (Finite elements studies for a complex underground structure).
1999 to 2007 BELGIQUE – SETESCO STRUCTURAL ENGINEERS Structural Engineer and/or Project Manager for the following projects (my own work precised
in each case)
Spy motorway rest areas, North and South buildings linked by a metal bridge with a 130 m span, in addition to pumps and buildings covered by tensile structures. (Samyn&Partners architects). [12]
Extension of a bridge at the Leuven train station (Pedestrian bridge linking the station with the northern part of the city). Tender dossier (Samyn&Partners architects).
Feasibility study for Seinhuis building at Leuven. Study on the possibility of adding two 900 m2 floors to an existing building without disrupting the station’s management infrastructure.
Building at the Ecole Solvay at Brussels, tender study (8,000 m2). Design of a metal roof structure and atrium for the auditoriums; dynamic study of the structure, preparation of tender plans (architects Art&Build). [13]
Arsenal office building at Brussels (15,000 m2). Calculations and execution plans for the reinforced concrete structure (Archi2000 architects).
Tour Rogier/Dexia Tower in Brussels (137 m high, 37 floors of superstructure, 5 floors of infrastructure, 120,000 m2). Study of different projects proposed since 2000, in particular : design of mixed high-load capacity columns and specific metal assemblies, analysis of ground-structure interaction, design of the central core, production of the execution plans, design and calculation of the stiffening girders in the upper part of the tower that supports the last 15 storeys, study of the elastic and deferred shortening of the columns, calculation of the outside metal canopy, follow-up of design calculations and plans of the pre-manufacturer (Samyn&Partners and Jaspers&Partners architects). [14]
Leuven high-speed train station (52 m and 39 m span metal arches supporting a 13.000 m2 roof). Worksite monitoring, calculation and design of the main metal structure and secondary structures: canopies, suspended façade structures, windbracing and particular assemblies (Samyn&Partners architects). [15]
Project of cable-stayed footbridge at Leuven (145 m span). Static and dynamic design of the structure (Samyn&Partners architects). [16]
Thin-shell metal sculpture at Gembloux (Rond-point des 3 Clefs). Design of the structure and foundation, preparation of the execution plans (J.M. Mathot, sculptor).
Construction project for NATO. Quantitative study of various construction possibilities of an anti-terrorism barrier (Samyn&Partners architects).
Leuven high-speed train station. Calculation of the Slimbox project (800m2 metal structure –Samyn&Partners architects).
Brugman Hospital. Metallic building for a cogenerator shelter (SAI and BEAI architects).
Cable-stayed metal windmill mast (100 metres high). Static design and fatigue calculation of the foundation (Samyn&Partners architects). [17]
Mannekens Vere motorway station project. Pre-dimensioning of the structure of the canopy (Samyn&Partners architects).
CPAS Saint-Pierre. Concrete calculations (E. Verhaegen architect).
Extension of the La Sapinière school at Boitsfort. Concrete calculations (De Smedt et Ramon architects).
CV PIERRE LATTEUR
_________________________________________________________
CV LATTEUR Pierre – May 2018 Page 19-30
Apartment building at the Sablon (7,000 m2). Concrete calculations (Jo Crepain architect).
2003 to 2007 BELGIUM – FREELANCE ENGINEER WORKING ON GOVERNMENT FUNDED PROJECTS
Projects include the study, design and worksite follow-up of rehabilitation projects for heritage-listed trees: an 11 meter cable-stayed mast structure for a 400-year old linden tree at Doyon (2004) and a timber support structure for one of the oldest Lebanese cedar trees in Belgium, located in the Parc de Mariemont (2007). [18]
1995 to 1999 BELGIUM – CIVIL ENGINEERING LABORATORY AT THE UCL
Organisation and follow-up of various on-site measurement projects: stability study part of the Tournai cathedral, measurements of cracks in the storage area of the former Chooz nuclear power plant (France), measurements of deformations of a slab under a progressive real load at the Schweppes plant at Genval, stability measurements of the lixiviates sledging sump (Halembaye), organisation of the deformation measurement campaign of the primary wall of the Doel 3 nuclear power plant during the decennial test. These studies are accompanied by many laboratory test reports on various materials or structures used in civil engineering, including hydrocarbonated materials.
CV PIERRE LATTEUR
_________________________________________________________
CV LATTEUR Pierre – May 2018 Page 20-30
A2.2. PHOTOS OF A FEW PROJECTS
2007 to 2013 BELGIQUE – GDFSUEZ/TRACTEBEL ENGINEERING Supervision or technical coordination of the following projects as Group Manager :
[1] Nuclear Plant of Tihange (full mission and execution studies for the construction an anti-flood 2 km long wall in order to protect the plant against floods of the river Meuse) :
[2] Destruction of a 50 m high building at Dunkerke (finite element model) :
[3] Footbridge in Verviers (Tender only, for a competition) :
CV PIERRE LATTEUR
_________________________________________________________
CV LATTEUR Pierre – May 2018 Page 21-30
[4] Cooling tower of Ruien power plant (Expertise and complex FE modelling) :
[5] Access building at Tihange nuclear plant - BCA (concrete building - full mission) :
[6] Saint Illier gas site – industrial buildings (Studies and execution plans) :
CV PIERRE LATTEUR
_________________________________________________________
CV LATTEUR Pierre – May 2018 Page 22-30
[7] Fos Tonkin natural gas terminal
(Feasibility studies for renovation – technical specifications) :
[8] Wind turbine foundations for Electrabel
(Studies, including fatigue calculations and execution plans). A variety of projects in Leuze-en-Hainaut, Zeebrugge harbour and
Volvo Cars sites :
[9] Diabolo/Wisselzone + Viaduc Link (Large-scale civil engineering works with post-stressed concrete
structures : full mission) :
CV PIERRE LATTEUR
_________________________________________________________
CV LATTEUR Pierre – May 2018 Page 23-30
[10] Zandvliedt/BASF plant
(Metal protective structure for transformers: full mission) :
[11] Project for storage of radioactive waste at Dessel (Metallic and reinforced concrete structure with
complex modelizations) : 1999 - 2007 : BELGIUM –SETESCO STRUCTURAL ENGINEERS, as Structural Engineer and/or Project Manager for the
following projects :
[12] Spy motorway rest areas, North and South buildings linked by a metal bridge with a 130 m span, in
addition to pumps and buildings covered by tensile structures. For this project I acted as structural engineer and project manager. (Samyn&Partners architects) :
CV PIERRE LATTEUR
_________________________________________________________
CV LATTEUR Pierre – May 2018 Page 24-30
[13] Building at the Ecole Solvay at Brussels, tender study (8,000 m2). For this project I calculated the metal
roof structure and the atrium for the auditoriums and I prepared the tender plans (architects Art&Build) :
[14] Tour Rogier/Dexia Tower in Brussels (137 m high, 37 floors of superstructure, 5 floors of infrastructure,
120,000 m2). For this project I studied the different projects proposed since 2000, in particular : design of mixed high-load capacity columns and specific metal assemblies, analysis of ground-structure interaction, design of the central core, production of the execution plans, design and calculation of the stiffening girders in the upper part of the tower that supports the last 15 storeys, study of the elastic and deferred shortening of the columns, calculation of the outside metal canopy, follow-up of design calculations and plans of the pre-manufacturer (Samyn&Partners and Jaspers&Partners architects) :
[15] Leuven high-speed train station (52 m and 39 m span metal arches supporting a 13.000 m2 roof). For
this project I made the Worksite monitoring and the calculation and design of the main metal structure and secondary structures: canopies, suspended façade structures, windbracing and particular assemblies (Samyn&Partners architects) :
CV PIERRE LATTEUR
_________________________________________________________
CV LATTEUR Pierre – May 2018 Page 25-30
[16] Project of cable-stayed footbridge at Leuven (145 m span). For this project I made the static and dynamic
design of the structure (Samyn&Partners architects) : [17] Cable-stayed metal windmill mast (100 metres high). For this project I made the static design and fatigue
calculation of the foundation (Samyn&Partners architects) :
CV PIERRE LATTEUR
_________________________________________________________
CV LATTEUR Pierre – May 2018 Page 26-30
2003 à 2007 Independent structural engineer/designer for the Walloon government
[18] Supporting structure for a classified 350 years old tree (Doyon, Belgique), 2004 :
[18] Supporting structure for a classified 250 years old tree (Royal parc-museum of Mariemont, 2007) :
CV PIERRE LATTEUR
_________________________________________________________
CV LATTEUR Pierre – May 2018 Page 27-30
A2.3. PUBLICATIONS, EXPERTISES, END-MASTER THESIS
JOURNAL PAPERS :
“Optimisation des treillis à membrure supérieure variable sur base de la théorie des indicateurs morphologiques", Revue scientifique ISILF (Belgium), no.18, April 2004, C. Moureaux and P. Latteur.
"Optimisation des arcs paraboliques et en chaînette – aide à la conception sur base d'indicateurs morphologiques", Revue française de génie civil, Vol.5, no. 1/2001, P. Latteur, Ph. Samyn and P. De Wilde.
"Charge critique et longueur de flambement des éléments à inertie variable et aux conditions d'extrémité élastiques", Revue scientifique ISILF (Belgium), no.15, April 2001, P. Latteur.
"Comparaison des treillis classiques de type Warren, Pratt et Howe : optimisation et prédimensionnement sur base d'indicateurs morphologiques", Revue française de génie civil, Vol.4, no. 4/2000. P. Latteur, Ph. Samyn and P. De Wilde.
CONFERENCE PAPERS :
(poster without présentation) “ISSD : Logiciel interactif de calcul des structures”, Les grands ateliers de l’Isle d’Abeau, « Enseigner les structures », 2013, ENS Architecture de Grenoble, P. Latteur.
“Anti Flood Protection System at the Tihange Nuclear Power Plant”, IABSE Conference on Assessment, Upgrading and Refurbishment of Infrastructures, 2013, Rotterdam, P. Latteur P., S. Basire, P. Debauche, M. Gilbert, E. Van Echelpoel.
“Limit Spans of Cable and Arch Structures”, 12th International Conference on Optimum Design of Structures and Materials in Engineering, OPTI2012, p.3-14, 2012, New Forest, UK., P. Latteur P., W.P. De Wilde.
“Basis for Dynamic Analysis and Optimization of Statically Determinate 2D (un)Damped Structures at Conceptual Design Stage using Morphological Indicators”, Proceedings of the Seventeenth International Association for Bridge and Structural Engineering
Congress on Creating and Renewing Urban Structures – Tall Buildings, Bridges and Infrastructure, 2008, Chicago, USA.. Vandenbergh T., De Wilde W.P. and Latteur P.,
“Optimization at Conceptual Design Stage with Morphological Indicators: Design for Strength or Design for Stiffness?”, Proceedings of the Fourth International Conference on High Performance Structures and Materials, pp.401-410, ed. De Wilde W.P. and Brebbia C.A., 2008, Algarve, Portugal,. Vandenbergh T., De Wilde W.P. and Latteur P..
“Optimization of Statically Determinate Trusses Considering Planar Instabilities at Conceptual Design Stage”, Proceedings of the Third International Congress Dedicated to the Art, Science and Practice of Structural Engineering (Structural Engineering World Congress), pp.141., 2007, Bangalore, India, Vandenbergh T., De Wilde W.P., Latteur P., Vantomme L..
“Influence of Stiffness Constraints on Optimal Design of Trusses Using Morphological Indicators”, Proceedings of the Third International Conference on High Performance Structures and Materials, pp.31-40, ed. Brebbia C.A. and De Wilde W.P., 2006, Ostend , Belgium. Vandenbergh T., De Wilde W.P., Latteur P., Verbeeck B., Ponsaert W., Van Steirteghem J..
“The Use of Morphological Indicators and Genetic Algorithms in Structural Optimization, Considering Stiffness Constraints”, proceedings of the Eighth International Conference on Computational Structures Technology, pp.467-468, ed. Topping B.H.V., Montero G. and Montenegro R., 2006, Las Palmas de Gran Canaria, Spain. Vandenbergh T., Verbeeck B., De Wilde W.P., Latteur P..
"Indicateurs de volume et de déplacement d'une structure isostatique : cas de la travée horizontale chargée verticalement", bulletin no. 7/12/2000 of the Classe des sciences of the Académie royale de Belgique, Ph. Samyn and P. Latteur.
"A Search For Efficient Trusses", proceedings of the IASS international congress, Bridging Large Spans From Antiquity To The Present, May 2000, Istanbul, p. 605-615. P. Latteur and Ph. Samyn.
"Volume and Displacement Indicators For Tubes And Profiles", proceedings of the International IASS congress, Bridging Large Spans From Antiquity To The Present, May 2000, Istanbul, p. 567-578. Ph. Samyn. and P. Latteur.
CV PIERRE LATTEUR
_________________________________________________________
CV LATTEUR Pierre – May 2018 Page 28-30
"The Determination of Stresses Due to Bending in Trusses Composed of Rigid Nodes Loaded on Their Nodes: Study of the Influence of Buckling", proceedings of the IASS international congress of September 1999 in Madrid, p. B.2.33-B.2.40. P. Latteur and Ph. Samyn.
"Optimization of Parabolic Arches Subjected to Distributed Loads", proceedings of the IASS international congress of September 1999 in Madrid, p. B.3.13-B.3.20. P. Latteur and Ph. Samyn.
"Multi-Harmonic and Multi-Stayed Harmonic Structures : The Search for Minimum Weight", proceedings of the IASS international congress of September 1999 in Madrid, p. B.3.41-B.3.50. Ph. Samyn and P. Latteur.
"Internally Stayed Trusses : The Search for Minimum Weight", proceedings of the IASS international congress of September 1999 in Madrid, p. B.3.31-B.2.40. Ph. Samyn and P. Latteur.
"A Measuring Device to Determine the Displacements of Buildings of Large Size", proceedings of the "Structural Faults and Repair" congress, Commonwealth Institute, July 1999, London. P. Latteur and B. Sine.
(This publication received the Earth Science Systems Research Award).
"Une méthode globale d'optmisation des treillis", Proceedings of the 2nd University Civil Engineering Congress, May 1999, Poitiers/France, p. 365-372. P. Latteur and Ph. Samyn.
"ISSD: An Interactive Software for Structural Design", EAAE, European Association for Architectural Education, Architecture and Engineering, The Teaching of Architecture for Multidisciplinary Practice, February 1998, Plymouth, p.329-338. P. Latteur and M. Lejeune.
"Harmonic Trusses: the Search for Minimum Weight", proceedings of the AEEA international congress, "Between Architect and Engineer", February 1998, Plymouth, p. 257-266. Ph. Samyn and P. Latteur.
"A Global Approach to the Evaluation of Secondary Stresses in Trusses Composed of Rigid Nodes", proceedings of the AEEA international congress, " Between Architect and Engineer ", February 1998, Plymouth, p. 513-523. P. Latteur.
"Volume of Structures: Application to Classical and Harmonic Structures", proceedings of the AEEA international congress of September 1998 in Sydney, p.537-545. Ph. Samyn, P. Latteur and J. Van Vooren.
"Displacements of Structures", proceedings of the IASS international congress of September 1998 at Sydney, p. 362-367. Ph. Samyn and P. Latteur.
BOOKS :
2006 “Calculer une structure, de la théorie à l'exemple”, 3rd edition, L’Harmattan/Academia editors, Louvain-la-Neuve, 488 pages, ISBN 2-87209-843-7.
1999 “Le béton armé dans tous ses états”, Academia-Bruylant editors, Louvain-la-Neuve, 136 pages, ISBN 2-87209-552-7.
1997 “Le calcul des structures”, Academia-Bruylant editors, Louvain-la-Neuve, 304 pages, ISBN 2-87209-483-0.
PHD THESIS AS CO-SUPERVISOR :
"Benchmarking Optimisation at Conceptual Design Stage with Morphological Indicators ", Vrije Universiteit Brussel, 2010, T. Vandenbergh.
END MASTER THESIS AS SUPERVISOR (ULG/AGRO-BIO TECH GEMBLOUX) :
"Conception et instrumentation d’un bâtiment en bois et ballots de paille", 2010, 69 pages, S. Dubois, supervisors F. Lebeau et P. Latteur.
"Etude d’une installation d’autoproduction énergétique pour une maison unifamiliale située dans un contexte naturel particulier", 2010, 210 pages, J. Ide, supervisors F. Lebeau et P. Latteur.
"Conception et optimisation d’un appui métallique aéré pour un élément de structure en bois de chêne", 2010, 70 pages, J. Lambert, supervisor P. Latteur.
CV PIERRE LATTEUR
_________________________________________________________
CV LATTEUR Pierre – May 2018 Page 29-30
"Optimisation des ossatures en bois et étude de la pertinence du marquage CE", 2009, 94 pages, F. Dupont, supervisor P. Latteur.
"Détermination de l’impact environnemental du secteur de la construction : conception et développement d’un outil informatique en ligne adapté à l’évaluation de l’énergie grise des bâtiments", 2008, 80 pages, Q. Ghysen, supervisors F. Lebeau et P. Latteur.
"Calcul des éléments mixtes selon l’Eurocode 4 : réalisation d’un programme de calcul et analyse des solutions fournies par des logiciels commerciaux", 2008, 133 pages, S. Houdart, supervisor P. Latteur.
"Planchers en bois : synthèse et validation d’un logiciel existant via une application PHP", 2008, 140 pages, S. Marchettini, supervisor P. Latteur.
"Déformations différées dans les poutres en béton armé et optimisation des armatures de flexion", 2005, 141 pages, V. Robaye, supervisor P. Latteur.
"Optimisation de treillis à membrure supérieure variable de type constante, linéaire, parabolique, elliptique, sinusoïdale et circulaire sur base de la théorie des indicateurs morphologiques", 2003, 82 pages, C. Moureaux, supervisor P. Latteur.
REPORTS (NON-EXHAUSTIVE LIST- UNIVERSITÉ CATHOLIQUE DE LOUVAIN/CIVIL ENGINEERING LABORATORY) :
"Analyse des mesures de stabilité effectuées à la cathédrale de Tournai", report no.355/2-96 and others, 1996, (with B. Sine). "Analyse des mouvements d'une dalle soumise à chargement réel progressif à l'usine Schweppes de Genval", report no. 93/7-96, 1996, (with B. Sine). "Doel 3 nuclear power station: measurements on the primary enclosure during the decennial test”, report no.250/6-95, 1996, (with B. Sine).
OTHER PUBLICATIONS (NON EXHAUSTIVE LIST) :
"Tihange Nuclear Plant : Technical Specifications for the Modeling of the Water Flows Inside the Plant’s Supply Channel ", note n° TIS/4FG/0247395/000/01, for d’Electrabel, 17 pages, 2012, P. Latteur., M. Gilbert, D. Vanbellinghen, G. Polet, Tractebel Engineering.
"Tihange Nuclear Plant : Design Review for the Mechanical Closing of the Plant’s Supply Chanel", note n° TIS/4AD/0242803/001/01, for d’Electrabel, 25 pages, 2012, C. Fable., D. Vanbellinghen, P. Latteur, G. Polet, Tractebel Engineering.
"Tihange Nuclear Plant : principle of the site’s closing", note n° TIS/4NT/0237083/001/01, for Electrabel, 16 pages, 2012, C. Fable., P.latteur, D. Vanbellinghen, G. Polet, Tractebel Engineering.
"Tihange Nuclear Plant : feasibility study for the anti-flood device", for Electrabel, 96 pages + annexes, 2011, L. Villers, P. Latteur, Tractebel Engineering.
«Wind turbines WT9-WT10/Raft Structural Design/Leuze-en-Hainaut », full study, including execution plans for an Enercon wind turbine foundation, for Electrabel, 85 pages, 2010, J. Davis, P. Latteur, Tractebel Engineering.
«Haute Lys windturbines, modelization and calculation of the tower’s anchorages », confidential expertise, for Erelia, 58 pages, 2009, V. Benats Valérie, P. Latteur, Tractebel Engineering.
"Dexia Tower : prévision de l’effet à long terme du raccourcissement élastique et différé des colonnes de la tour et du noyau central", study for the client, July 2005. P. Latteur.
"Dexia Tower : détermination de l'interaction sol-structure et calcul du comportement du noyau de contreventement en sous-sol", internal Samyn&Partners/Setesco/Seco memorandum, July 2002. P. Latteur, Luc Sottiaux.
"Optimization of Structures by the Use of Morphological Indicators", ABSTRACT, proceedings of the WG18 working group (Environmentally Compatible Structures and Structural Materials – ECS) of the IASS of May 2000 at Prague, p.68. P. Latteur.
CV PIERRE LATTEUR
_________________________________________________________
CV LATTEUR Pierre – May 2018 Page 30-30
"Colonnes haubanées : détermination numérique de la longueur de flambement et procédure de design", internal Samyn&Partners and Setesco memorandum, May 2000. P. Latteur.
"Mesures de déplacements et de déformations de la cathédrale de Tournai", monthly review of the Université catholique de Louvain, December 1998. B. Sine and P. Latteur.
A2.4. MISCELANEOUS UCL means “Université catholique de Louvain – Belgium” : www.uclouvain.ac.be
VUB means “Vrije Universiteit Brussels – Belgium” : www.vub.ac.be ULB means “Université libre de Bruxelles – Belgium” : www.ulb.ac.be
ULg means “Université de Liège – Belgium” : www.ulg.ac.be Fsagx means “Université de Liège/Bio Engineering Faculty – Belgium” : www.fsagx.ac.be
ECAM means “Ecole centrale des arts et métiers – Belgium” : www.ecam.be
1999…2011 : Designer of the interactive software for structural design (ISSD: www.issd.be) used by several universities and colleges in Belgium and abroad (Université d'Amiens-Picardie, ISA Saint-Luc Bruxelles, T.U. Eindhoven, Ecole d'Architecture du Languedoc, Ecole d'Ingénieurs de Genève, University of West England, Royal Danish Academy of Fine Arts, UCL, VUB, FSAGX, ISA La Cambre), as well as civil engineering companies (Galère Belgium, Composite solutions LTD (USA), ERCC Brussels, Setesco Brussels, SAI Brussels).
2010…2011 Member of the Building committee of ULg/Fsagx.
2009 Founder of the web portal of the Belgian student community www.kotplanet.be.
“The keys to commercial excellence”, 6-day training course, Krauthammer, Brussels.
President of the jury for the Cerdecam Award at the ECAM (Public session with Royal Princess Claire).
2003 to 2007 President of the Agricultural Engineering jury at the Ulg/Fsagx.
2006 Member of the jury for the PhD thesis of VUB student Jan Van Steirteghem. Thesis title: A Contribution to the Optimization of Structures Using Morphological Indicators: (In)Stability and Dynamics.
Since 2005 President of the end of graduation juries at the ECAM, Civil Engineering Department.
2003 President of the jury for the Paduart Award jointly organised by the ULB and the VUB universities.
Complementary training course on the dynamics of structures (16 hrs - Robobat head office, France).
2002 Training course on tensile structures at the VUB (www.vub.ac.be - 20 hrs).
2001 One-week residency at the London Ove Arup & Partners Company for the calculation of the shear walls for the Rogier/Dexia Tower of Brussels. (www.arup.com).
Training course / dynamics of structures and spatial buckling of structures (18 hrs - Robobat head office).
2000 Access to the profession of architect (supervisor during 1998 and 1999 : Philippe Samyn/www.samyn.be).
1999 Authorship of the research results obtained from the registration and estates administration of the UCL (topic : development of a laser measurement table at Tournai cathedral/Belgium).
Guest at the Ecole d'ingénieurs of Geneva for a conference on the "Optimisation of structures".
1997-1998 Secretary of the Educational Commission of the Faculty of Applied Sciences of the UCL.
In charge of the worksite visits organised as part of the UCL training programme for students in civil engineering.
1995 Training course on industrial sensors (on-going engineering training programme/UCL/40 hrs).
In charge of the sailing theory course at the ULYC (UCL student sailing club : www.ulyc.be).