phase 1 literature review references_prc assist

REFERENCES: PRC ASSIST

Section 1.0 - Introduction

1. British Wind Energy Association (BWEA), 2009. Guidelines for the Selection and

Operation of Jack-ups in the Marine Renewable Energy Industry, 89 pp

http://www.renewableuk.com/en/publications/index.cfm/guidelines-for-jack-ups-in-

marine-renewable-energy ABSTRACT; need to subscribe

2. Cassidy, M., 2011, Mobile Jack-up Platforms, In: Randolph, M. and Gourvenec, S.

Offshore Geotechnical Engineering, Taylor and Francis.

3. Dean, E.T.R., 2010. Offshore Geotechnical Engineering - Principles and practice,

London: Thomas Telford.

4. Harrisson, A.R., 2008. Marine Warranty Surveying for Offshore Projects and Issues

Faced in the Current Market, Proceedings Annual Conference of the Maritime Law

Association of Australia and New Zealand.

5. Hossain, M.S., M.F. Randolph, Y. Hu and D.J. White. 2006. Cavity stability and

bearing capacity of spudcan foundations on clay. Offshore Technology Conference,

OTC 17770.

6. International Organisation for Standardisation (ISO), 2012a. Petroleum and natural

gas industries – Site-specific assessment of mobile offshore units – Part 1: Jack-ups.

19905-1.

http://www.iso.org/iso/catalogue_detail.htm?csnumber=34592 ABSTRACT; need to

subscribe

7. International Organisation for Standardisation (ISO), 2012b. Petroleum and Natural

gas Industries - Site-Specific Assessment of Offshore Units - Part 2: Jack-ups

commentary and detailed sample calculation. 19905-2.

http://www.iso.org/iso/home/store/catalogue_tc/catalogue_detail.htm?

csnumber=62346 ABSTRACT; need to subscribe

8. Jack, R.L., Hoyle, M.J.R., Smith, N.P. and Hunt, R.J., 2013 Jack-up Accident

Statistics - a Further Update, In: Proceedings of the 14th International Conference:

the Jack-Up Platform Design, Construction and Operation, London, 17-18

September, 22 pp.

9. Jones, D.E., Bennett, W.T., Hoyle, M.J.R., 1993. The Joint Industry Development of

a Recommended Practice for the Site Specific Assessment of Mobile Jackup Units,

In: Proceedings of the Offshore Technology Conference (OTC Paper 7306), 12 pp.

10. Menzies, D., and Roper, R., 2008. Comparison of jackup rig spudcan penetration

methods in clay. Proc Offshore Technology Conference. Houston, Texas, USA, OTC

19545.

11. Osbourne, J.J. and Paisley, J.M., 2002. S E Asia Jack-Up Punch-Throughs: The Way

Forward?, In: Proceedings of the OSIG International Conference, London, 301-306.

12. Petronas Carigali Sdn Bhd (PCSB), 2013a. Practice for the Site-Specific Assessment

of Jack-Up Units, PTS Circular 11.22.15.

http://www.iso.org/iso/home/store/catalogue_tc/catalogue_detail.htm?csnumber=62346

http://www.iso.org/iso/home/store/catalogue_tc/catalogue_detail.htm?csnumber=62346

http://www.iso.org/iso/catalogue_detail.htm?csnumber=34592

http://www.renewableuk.com/en/publications/index.cfm/guidelines-for-jack-ups-in-marine-renewable-energy

http://www.renewableuk.com/en/publications/index.cfm/guidelines-for-jack-ups-in-marine-renewable-energy

13. Petronas Carigali Sdn Bhd (PCSB), 2013b. Foundation Stability of Jack-Up/MOPU

Platforms, PTS Circular 11.22.16

14. Society of Naval Architects and Marine Engineers (SNAME), 2008. Technical and

Research Bulletin 5-5A. Guidelines for Site Specific Assessment of Mobile Jack-up

Units.

Section 2.0 - Case Studies and Statistics of Jack-up Failures



19905-1.




3. Jack, R.L., Hoyle, M.J.R., Hunt, R.J. and Smith, N.P., 2007 Jack-up Accident

Statistics - Lots to Learn, In: Proceedings of the 14th International Conference: the

Jack-Up Platform Design, Construction and Operation, London, 17-18 September, 22

pp.

4. Jack, R.L., Hoyle, M.J.R., Smith, N.P. and Hunt, R.J., 2013 Jack-up Accident

Statistics - a Further Update, In: Proceedings of the 14th International Conference:

the Jack-Up Platform Design, Construction and Operation, London, 17-18

September, 22 pp.

5. Mars, P., Normann, M.H., Walker, H., 1991, Safe Towage of Jack-Up Installations,

In: Proceedings of the 3rd International Conference: the Jack-up Platform Design,

Construction and Operation, 24-25 September, 24pp.

6. McClelland, B., Young, A.G. and Remmes, B.D., 1981. Avoiding Jack-Up Rig

Foundation Failures, Symposium on Geotechnical Aspects of Offshore and

Nearshore Structures, 14-18 December, Bangkok, Thailand.



Section 3.0 - Risk Assessment Framework

1. Hansen, J.B., 1970. A Revised and Extended Formula for Bearing Capacity, Bulletin

No. 28, Danish Geotechnical Institute, Copenhagen, pp. 5-11.



OTC 17770.

3. Houlsby, G.T. and Martin, C.M., 2003. Undrained Bearing Capacity Factors for

Conical Footings on Clay, Geotechnique, 53(5), 513-520.

4. International Organisation for Standardisation (ISO), 2002. Petroleum and natural

gas industries – Offshore production installations – Guidelines on tools and

techniques for hazard identification and risk assessment. 17776.



19545.

6. Paisley, J.M. and Chan, N., 2006. SE Asia punch-throughs: Technical guidance note

on site assessment. 1st Jack-up Asia Conference and Exhibition, Singapore.

7. Skempton, A.W. 1951. The Bearing Capacity of Clays, Building Research Congress,

London 1, 180-189.



Units.

Section 4.0 - Engineering

1. Benson, D.J. (1992). Computational methods in lagrangian and eulerian hydrocodes.

Comput. Methods Appl. Mech. Eng., 99(2–3), 235–394.

2. Hossain, M.S. and Randolph, M.F., 2009. New mechanism-based design approach

for spudcan foundations on single layer clay J. Geotechnical and Geoenvironmental

Engineering, ASCE, 135(9), 1264–1274.

3. Hossain, M.S. and Randolph, M.F., 2010. Deep-penetrating spudcan foundations on

layered clays: numerical analysis. Géotechnique, 60(3), 171-184.

4. Hossain, M.S., Hu, Y., Randolph, M.F. and White, D.J. 2005. Limiting cavity depth for

spudcan foundations penetrating clay. Géotechnique, 55(9), 679-690.



OTC 17770.

6. Hossain, M.S., Randolph, M.F., Hu, Y. and White, D.J., 2006. Cavity Stability and

Bearing Capacity of Spudcan Foundations on Clay, Offshore Technology

Conference, Houston, OTC 17770.

7. Houlsby, G.T. 2010. A probabilistic approach to the prediction of spudcan

penetration of jack-up units. Proc. 2nd Int. Symp. on Frontiers in Offshore

Geotechnics: ISFOG, Perth.

8. Hu, Y., and Randolph, M. F. (1998). A practical numerical approach for large

deformation problems in soil. Int. J. Numer. Anal. Methods Geomech., 22(5), 327–

350.



19905-1.






Units.

12. Tho, K.K., Leung, C.F., Chow, Y.K., and Swaddiwudhipong, S. 2012. Eulerian finite

element technique for analysis of jack-up spudcan penetration. International Journal

of Geomechanics, ASCE, 12(1): 64–73.

13. Van Der Wal, T, Boumeester, D, Peuchen, J, Vrouwenvelder, A.C.W.M.Van Baars, S

and Lagers, G.H.G, 2007 A probabilistic approach for geotechnical assessment of

jack-up leg penetration. Proc. 6th Int. Offshore Site Investigation and Geotech. Conf.,

11–13 Sept., London, 515–520.

Section 5.0 - Specific Hazard during Installation

1. Bienen, B., 2013. Understanding the punch-through risk of jack-up spudcans

resulting from set-up during the installation process, In: Proceedings of the 14th

International Conference: the Jack-Up Platform Design, Construction and Operation,

London, 17-18 September, 22 pp.

2. Foo, K.S., Quah, M.C.K., Wildberger, P. and Vazquez, J.H., 2003. Spudcan footprint

interaction and rack phase difference. Proc. 9th Int. Conf. Jackup Platform Design,

Construction and Operation, City University, London, UK.

3. Global Maritime / Fugro Joint Industry Project, 2002. Spudcan-Footprint-Interaction

JIP, Production of a best practice guideline document to enable safe Jack-up

emplacement at locations where Spudcan-Footprint Interaction may be an issue.

4. Haydar, A and Wong, P.C., 2013. Advanced Continuum Modeling of Buried Pipeline

Response to Jack-up Spudcan Penetration, In: Proceedings of the 14th International

Conference: the Jack-Up Platform Design, Construction and Operation, London, 17-

18 September, 22 pp.





OTC 17770.

7. Houlsby, G.T. and Martin, C.M., 2003. Undrained Bearing Capacity Factors for

Conical Footings on Clay, Geotechnique, 53(5), 513-520.

8. Jardine, R.J., Kovacevic, N., Hoyle, M.J.R., Sidhu, H.K. and Letty, A., 2001. A study

of eccentric jack-up penetration into infilled footprint craters. Proc. 8th International

Conference the Jack-up Platform, City University, London.



19545.

10. Mirza, U.A., Sweeney, M. & Dean, A.R., 1988. Potential effects of jack-up spud can

penetration on jacket piles. In: Proceedings of the Offshore Technology Conference.

Houston, Texas.

11. Osborne, J.J., Pelley, D., Nelson, C. and Hunt, R., 2006. Unpredicted Jack-up

Foundation Performance. Proc 1st Jack-Up Asia Conference & Exhibition,

Singapore.

12. Osborne, J.J., Teh, K.L., Leung, C.F., Cassidy, M.J., Houlsby, G.T., Chan, N., Devoy,

D., Handidjaja, P. and Foo, K.S., 2008. An introduction to the InSafe JIP. Proceeding

of the 2nd Jack-up Asia Conference. Singapore.



14. Paisley, J.M. and Chan, N., 2006. SE Asia punch-throughs: Technical guidance note

on site assessment. 1st Jack-up Asia Conference and Exhibition, Singapore.

15. RPS Energy, Improved Guidelines for the Prediction of Geotechnical Performance of

Spudcan Foundations During Installation and Removal of Jack-Up Units, InSafeJIP,

EOG0574 Rev 1b, 18th November 2010.



Units.



Units.

18. Siciliano, R.J., Hamilton, J.M., Murff, J.D., and Phillips, R., 1990. Effect of jackup

spud cans on piles. In: Proceedings of the Offshore Technology Conference.

Houston, Texas, 1990.

19. Teh, K.L., Byrne, B.W. and Houlsby, G.T., 2006. Effects of seabed irregularities on

loads developed in legs of jack-up units. Jack Up Asia Conference & Exhibition 2006,

Singapore.

20. Tho, K. K., Leung, C.F., Chow, Y.K. and Swaddiwudhipong, S. (2013). Eulerian finite

element simulation of spudcan–pile interaction, Canadian Geotechnical Journal, 50,

595–608.

21. Vazquez, J.H., Michel, R.P., Alford, J.H., Quah, M, Foo, K.S., 2005. Jack-Up Units -

A Technical Primer for the Offshore Industry Professional, 24 pp

22. Xie, Y., 2009. Centrifuge model study on spudcan-pile interaction. Ph.D thesis,

Department of Civil and Environmental Engineering, National University of

Singapore, Singapore.

Section 6.0 - Specific Hazard During Operation

1. Allersma H.G.B., Hospers B. and den Braber J.G., 1997. Centrifuge tests on the

sliding behaviour of spudcans, Canadian Geotech J. Vol. 34, no. 5, pp. 658-663.

2. API RP2A – WSD, 2000. Recommended Practice for Planning, Designing and

Constructing Fixed Offshore Platforms – Load and Resistance Factor Design.

3. Dean E.T.R., 1995. Centrifuge Modelling of 3 Leg jackups with Non-skirted and

Skirted Spuds on Partially Drained Sand Offshore Technology Conference OTC

7839.

4. Dean E.T.R., Hsu Y.S., James R.G., Sasakura T., Schofield A.N. and Tsukamoto Y.,

1997. Centrifuge modelling of jackups and spudcans on drained and partially

drained silica sand, Marine Structures, Vol. 10, pp. 221-241.

5. Dean E.T.R., James R.G., Schofield A.N. and Tsukamoto Y., 1998. Drum centrifuge

study of three-leg jackup models on clay Geotechnique, Vol. 48, No. 6.

6. Dean, E.T.R., 1991, Some Potential Approximate Methods for the Preliminary

Estimation of Excess Pore Water Pressures and Settlement-Time Curves for

Submerged Foundations subjected to Time Dependent Loading, Cambridge

University Engineering Department, CUED/D-Soils/TR240.

7. Hanlon, C., 2013. The Usumacinta Disaster, Journal of Undergraduate Engineering

Research and Scholarship (Memorial University), PT-13-Hanlon.




gas industries – Specific requirements for offshore structures, Part 2: Seismic design

procedures and criteria. 19901-2.



19905-1.




12. Kramer, Steven L. (1996), Geotechnical Earthquake Engineering.

13. McClelland, B., Young, A.G. and Remmes, B.D., 1981. Avoiding Jack-Up Rig

Foundation Failures, Symposium on Geotechnical Aspects of Offshore and

Nearshore Structures, 14-18 December, Bangkok, Thailand.

14. Raaijmakers, T., Sonneville, B. d. and Rudolph, D., 2013. Joint Industry Project

"OSCAR" on Offshore Scour And Remedial measures, In: Proceedings of the 14th

International Conference: the Jack-Up Platform Design, Construction and Operation,

London, 17-18 September.



Units.



Units.

17. Templeton, J.S, III, 2013. Continuum foundation analysis of jack-up rigs for

earthquake conditions, Proceedings of the International Jack-up Platform

Conference.

18. Vazquez, J.H., Michel, R.P., Alford, J.H., Quah, M, Foo, K.S., 2005. Jack-Up Units -

A Technical Primer for the Offshore Industry Professional, 24 pp

19. Youd et al., 2001. Liquefaction Resistance of Soils: Summary Report from the 1995

NCEER and 1998 NCEER/NSF Workshops on Evaluation of Liquefaction Resistance

of Soils.

Section 7.0 - Specific Hazard During Post-Operation

1. Gaudin, C., Bienen, B. and Cassidy, M. J., 2011. Investigation of potential on bottom

water jetting to ease spudcan extraction in soft clay, Géotechnique, 61(12), 1043-

1054.



19905-1.




4. Purwana, O.A., Leung, C.F., Chow, Y.K. and Foo, K.S., 2005. Influence of base

suction on extraction of jack-up spudcans. Géotechnique, 55(10), 741-753.

5. RenewableUK, 2013, Guidelines for the Selection and Operation of Jack-ups in the

Marine Renewable Energy Industry, Issue 2.

6. RPS Energy, Improved Guidelines for the Prediction of Geotechnical Performance of

Spudcan Foundations During Installation and Removal of Jack-Up Units, InSafeJIP,

EOG0574 Rev 1b, 18th November 2010



Units.

Section 8.0 - Data Management Using Geographical Information Systems

1. Kuhn, W. 2005. Introduction to Spatial Data Infrastructures. Presentation, March 14

2005.

2. Tomlinson, R.F., 1962. Computer Mapping: An Introduction to the Use of Electronic

Computers in the Storage, Compilation and Assessment of Natural and Economic

Data for the Evaluation of Marginal Lands.

Section 9.0 - Mapping Standards

1. International Association of Oil And Gas Producers (OGP), 2013. Guidelines for the

use of the Seabed Survey Data Model. London: OGP.


gas industries – Offshore production installations – Guidelines on tools and

techniques for hazard identification and risk assessment. 17776.

3. International Organisation for Standardisation (ISO), 2003. Geographic information –

Metadata”. 19115.

4. International Organisation for Standardisation (ISO), 2007. Geographic MetaData

XML (gmd) encoding, an XML Schema implementation. ISO 19139

phase 1 literature review references_prc assist

Documents