ph-6a stud welding gun with magnet coil - euroshop21.com · innovative special features of the...
TRANSCRIPT
R
PH
-6A
.E/1
0.20
05
PH-6A Stud Welding Gun with Magnet Coil
Product informationDrawn arc stud welding
PH-6A SOYER automatic stud welding gun with magnet coil
Due to its new feed system, the newly developed PH-6A automatic stud welding gun with magnet coil allows the semi-automatic and fully automatic feed of large and oversized welding studs of all types with or without flange. Studs of large dimen-sions can either be fed manually or fully automatically from the UVR-400 SOYER universal feeder via the feed chute into the stud holder. The PH-6A automatic stud welding gun is of a particularly sturdy and durable design and is even suited for the toughest professional continuous operation. (For innovative special features, please see over).
Studs and RD/FD pins from M8 - M12 and/or 8 - 12 mm in diameter and 10 - 50 mm in lengthSteel, stainless steel and heat-resistant steelShort-cycle drawn arc stud welding in the radial-symmetric magnetic fieldAutomatic air cooling of the stud holder with simultaneous cleaning3 m highly flexible
340 mm 200 mm80 mm2.6 kg, without cables
Subject to technical changes
Description:
Technical data:
Welding range:
Material:Welding process: Type of cooling:Welding and control cables: Total length with support and magnet coil:Total height above grip:Total width:Weight:
Heinz SoyerBolzenschweißtechnik GmbH
Inninger Straße 14 · 82237 Wörthsee · GermanyTel.: +49 8153 885-0 · Fax: +49 8153 8030 · Internet: www.soyer.de / www.soyer.com
Safety testedProductioncontrolled
Innovative Special Features of the PH-6A Automatic Welding Gun with Magnet Coil
Combined with a simple and practically-oriented operation, the new PH-6A automatic stud welding gun with magnet coil guarantees a maximum of technical performance advantages for the production of high-quality stud welded joints in series production.
Additional performance features of the PH-6A automatic stud welding gun with magnet coil include:
Development and production fulfil all prescribed safety targets such as
- the latest safety and accident prevention regu- lations (Act on the Safety of Technical Working Equipment)
- electromagnetic compatibility (EMC Act) - European regulations (EU Directives on Machinery)
Multifunctional applicability for capacitor discharge, drawn arc and short-cycle drawn arc stud welding when replacing the support with magnet coil by a standard support suitable for the aforementioned conventional stud welding systems
Impact- and break-proof handle and synthetic housing
Optimum protection against welding spatters, dirt and other contamination
Welding, control and air cable guide in the gun handle
Simple and safe retrofitting system for other stud dimensions
Easily adjustable support legs for differing stud lengths
Simple, manual lift adjustment by means of a special turning knob
Absolutely precise stud positioning due to back-lash-free sequence of motions
Spirit level at the end of the gun to ensure vertical welding positions
Long service life and long-term quality due to wear-free guide bush with ball bearing and special hardened and ground guide piston
Invariably high quality performance even with un-interrupted continuous operation to ensure quality assurance procedures
Small, regular and spatter-free collar
Reduced penetration Narrow fusion zone No arc blow effect
Low-cost welding studs of premium quality
Production Quality Technology DesignQuality
ManagementInternational
Approval SafetyEC
Conformity
SOYER top-of-the-range products awarded the following prizes for
IndustrieForumDesignHannover
DIN EN ISO 9001:2000
R
2UD7
TÜV Rheinland
geprüfteSicherheit
SOYERBolzenschweiß-
technik
1.4301, 1.4303,1.4401, 1.4404,1.4541, 1.4571
Z30.3-6
SOYERBolzenschweiß-
technik
DIN EN ISO 13918Typ PD, RD, UD,FD, IT, PT, UT,
MD, RD, ID
Material: Stahl 4.8 schweißgeeignet
AlMg3
Stud Manufacture