petroleum engineering 324 reservoir performance · pdf filepete 324 (07a) — material...

PETE 324 (07A) — Material Balance Slide — 1

Petroleum Engineering 324Reservoir Performance

Thomas A. Blasingame, Ph.D., P.E.Department of Petroleum Engineering — Texas A&M University

College Station, TX 77843-3116 (USA)+1.979.845.2292

[email protected]

Material Balance16 February 2007


Material BalanceOrientation

Material Balance: IssuesOil MBE (must know all data, also cf(p)).Gas MBE (abnormal pressure, water drive).

Material Balance: Topics"Accounting" Concept of Material Balance:

Require all inflows/outflows/generations. (Average) reservoir pressure profile is REQUIRED.Require rock, fluid, and rock-fluid properties (at some scale).

Oil Material Balance:Less common than gas material balance (pressure required).

Gas Material Balance:Volumetric dry gas reservoir (p/z versus Gp (straight-line)).Abnormally-pressured gas reservoirs (various techniques).Waterdrive/water influx cases (always problematic)MaterialBalance yields RESERVOIR VOLUME!


General Concept of Material Balance...

From: Petroleum Reservoir Engineering— Amyx, Bass, and Whiting (1960).

a. Initial reservoir conditions. b. Conditions after producing NpSTB of oil, and Gp SCF of gas, and Wp STB of water.

Material Balance: Key IssuesMust have accurate production measurements (oil, water, gas).Estimates of average reservoir pressure (from pressure tests).Suites of PVT data (oil, gas, water).Reservoir properties: saturations, formation compressibility, etc.

Reservoir Engineering (Material Balance)Material Balance of a Petroleum Reservoir


Average Reservoir Pressure

From: Engineering Features of the Schuler Field and Unit Operation — Kaveler (SPE-AIME, 1944).

Average Reservoir Pressure: Key IssuesMust "average" pressures over volume or area (approximation).Pressure tests must be representative (pavg extrapolation valid).Can average using cumulative production (surrogate for volume).

Reservoir Engineering (Material Balance)Average Reservoir Pressure for Material Balance


Black Oil Material Balance Case: (Example)Note that all fluid functions are given: Np, Wp, and GOR (for Gp).Average reservoir pressure is presumed correct.Authors cite "partial waterdrive" — remains a contentious issue.

From

: App

licat

ion

of th

e M

ater

ial B

alan

ce

to a

Par

tial W

ater

driv

e R

eser

voir

—va

n Ev

erdi

ngen

(SPE

, 195

3).

Reservoir Engineering (Material Balance)Oil Material Balance Case (1/2)


"Black Oil" Material Balance: (p>pb )

"Solution Gas Drive" (Oil) Material Balance: (all p)

poi

o

ti N

BB

Ncpp 1−=

[ ]

[ ]

we

iwi

fwiwoi

gi

goi

gssioio

wpgspop

BW

ppS

cScNBm

BB

mNB

BRRBBN

BWBRRBN

+

−−

+++

⎥⎥⎦

⎤

⎢⎢⎣

⎡−+

−+−

=+−+

)()1(

)()1(

1

)()(

)(

(Oil Expansion (RB))

(Gas Cap Expansion (RB))

(Water Exp./Pore Vol. Comp. (RB))

(Water Influx (RB))

(Withdrawal (RB))

Oil Material Balance Relations:

Reservoir Engineering (Material Balance)Oil Material Balance Case (2/2)


General Gas Material Balance:

"Dry Gas" Material Balance: (no reservoir liquids )

"Abnormal Pressure" Material Balance: (cf=f(p))

[ ]

[ ]⎥⎥⎦

⎤

⎢⎢⎣

⎡−−++−−

=−−

ewinjpg

swpinjpi

i

i

i

ie

WBWWB

RWGGGz

pzp

pppczp

)(1615.51

))((1

⎥⎦⎤

⎢⎣⎡ −= p

i

i GGz

pzp 11

[ ] ⎥⎦

⎤⎢⎣

⎡−

−−=

GG

pppczp

zp p

iei

i 1 ))((1

1

⎥⎥⎦

⎤

⎢⎢⎣

⎡+

⎥⎥⎦

⎤

⎢⎢⎣

⎡

⎥⎥⎦

⎤

⎢⎢⎣

⎡+

⎥⎥⎦

⎤

⎢⎢⎣

⎡++

−= )(

)1(1 )( fw

pR

pAQ

pR

pNNPfwwi

wie cc

VV

VV

ccSS

pc

Gas Material Balance Relations:

Reservoir Engineering (Material Balance)Gas Material Balance Case (1/6)


Gas Material Balance: Abnormally Pressured Reservoir ExampleNormal pressure production sequence (volumetric depletion, Gapp).Abnormal pressure production sequence (OGIP, G).



Gas Material Balance: Abnormally Pressured Reservoir ExampleNormal pressure production sequence (volumetric depletion, Gapp).Abnormal pressure production sequence (OGIP, G).


a. Gas Material Balance Plot: p/z vs. Gp —Illustration of the abnormal pressure trend starting at an inflection point defined by the hydrostatic (normal) pressure.

b. Gas Material Balance Plot: p/z vs. Gp —Illustration of the abnormal pressure trend starting at an inflection point defined by the hydrostatic (normal) pressure.


"Dry Gas" Material Balance: Normally Pressured Reservoir ExampleVolumetric reservoir — no external energy (gas expansion only).p/z versus Gp yields unique straight-line trend.Linear extrapolation yield gas-in-place (G).



"Dry Gas" Material Balance: Abnormally Pressured Reservoir ExampleVolumetric reservoir — no water influx or leakage.p/z versus Gp yields unique quadratic trend (from approximated MBE).Quadratic extrapolation yield gas-in-place (G).



a. Gas Material Balance Plot: p/z vs. Gp —simulated performance. Note effect of aquifer permeability on field performance.

b. Gas Material Balance Plot: p/z vs. Gp— simulated performance. Note effect of displacement efficiency (Ep).

Gas Material Balance: Water Drive Gas ReservoirPressure (hence p/z) is maintained during production via communication with an unsteady-state aquifer (this study).From: Unsteady-State Performance of Water Drive Gas Reservoirs, Agarwal (Texas A&M Ph.D., 1967).


petroleum engineering 324 reservoir performance · pdf filepete 324 (07a) — material...

Documents