petrol & gas equipments - ozkarpet.com · and no lp gas pump installation is complete without...
TRANSCRIPT
Dependable Electronics
Tested at -40°C to +70°C, with 95% RH
No information lost during power outages
Attractive and Long-lasting Image
Polycarbonate upper door and Polyester coated lower door decal prevent rust Standard 4-year corrosion warranty on exterior surfaces Unlimited custom graphic options
Low Drift Metering
V+ is the most accurate and lowest drift positive displacement meter in the worldFixed stroke length by designHighly tuned, wear resistant materials
Enhanced, Secure Pulser
End-to-end encryptionLift-off detection
Physically secure
FUEL DISPENSERS
FUEL GROUP
MOBILE STATION CONTAINER
View: dispensing niche with gas pump for diesel; ling nichefor transfer pump; ofce with power set and air conditioner.
View: dispensing nichewith gas pump
Red Jacket has the resources that help customers with ow
requirements, and site optimization. We take a comprehensive
approach to product design that delivers the fuel ow you need,
and also factors in important cost considerations such as the
equip- ment's serviceability, safety, ease of upgrades, and
impact on environmental compliance.
SUBMERSIBLE PUMPS
TANK AUTOMATION SYSTEMS
i-Site™ CONSOLE
The SiteSentinel® iSite™ lowers installation costs by allowing
probes, sensors and leak detection devices to be connected
via its Vsmart module for wireless or single wire inter face to the
console. In addition, all devices are automatically detected
and congured by the push of a button, making it the easiest
ATG system in the industry to install, congure and use.
i-TOUCH CONSOLE
SiteSentinel® iTouch is a multi-function, high-quality tank
monitoring system that provides real-time, accurate inventory
information for up to 16 underground storage tanks. The
enhanced performance of the SiteSentinel® iTouch improves
data processing, allows for future system expansion and can
be customized to meet each user's needs.
• Accurate - Five-point temperature sensing element provides
exact temperature compensation for product volume contraction
and expansion, allowing for accurate inventory management and
in-tank leak detection.
• Easy-to-Use - Automatically transmits probe prole to SiteSentinel®
iSite™ on start-up, eliminating programming errors
• All stainless steel construction
• Welded construction – eliminates potential leak points
• Level 1 probe - one probe for all applications
• Optional Density Float - provides a measure of even the slightest
changes in product quality within the specied API density range
ELECTRONIC LEVEL MEASURING PROBE
924B Probe System Features
STATION EQUIPMENTS
AIR WATER CLOCK UPP WELDING MACHINE UPP STRIPPING APPARATUS
OVERFILL PREVENTION VALE SHUT OFF VALVE SLIP ON SPILL CONTAINER ATMOSPHERIC VENTS
DISPENSER SUMPS & TANK SUMPS FIBER MANHOLE COVERS DOUBLE WALL TUBING AND FITTING
UPP PIPE
UPP Electrical Conduit Pipe,for underground electrical wiring protection
UPP Extra Lined Primary Pipe, with 100% nylonbarrier for product, suction, pressure, vapour,vent and lling lines
UPP Secondary Containment Pipe, for pressuresystems or environmentally sensitive sites
Underground Fuel Piping Systems UPP SystemsUnderground fuel pipe for use in fuelstationsand the fuel industry;
FUEL NOZZLES
• 1” Nozzle for diesel
• ¾” Nozzle for gasoline
• Vapor Recovery Nozzles
UPP Unlined Primary Pipe, for use as Vent,vapour recovery (Vr1) and lling lines
CAR WASH
COLD HIGH PRESSUREWASHER
HOT-COLD HIGHPRESSURE WASHER
ELECTRICAL HOT-COLDWASHER MACHINE
GASOLINE HIGH PRESSUREWASHER
FOAM - LIQUID SPRAYINGMACHINES
COIN OPERATED VACUUMCLEANER
STEAM WASHER350 BAR HIGH PRESSURE
WASHER
HOT GENERATOR CARPET SPIN DRYERSCARPET CLEANING
MACHINE
AİR COMPRESSORS
GENERATOR
CAR LİFT
TWO POST LIFT - OM L23 / 4 TON MID RISE SCISSOR LIFTOM L55 / 3 TON
FOUR POST ALIGNMENT LIFTOM L41 / 4.5 TON
WATER PUMPS
CEA,CA
Delivery: up to 31 m³/hHead: up to 62 mPower supply: both single and three-phase 50 and 60 HzPower: from 0.37 kW up to 3 kWMaximum operating pressure: 8 barTemperature of pumped liquid: from -10 °C to 110 °C
Stainless steel threaded centrifugal pumps
Horizontal multistage centrifugal pumpsE-HM
Delivery: up to 29 m³/h
Head: up to 160 m
Power supply: both single and three- phase 50 and 60 Hz
Power: from 0.30 kW up to 5.50 kWMaximum operating pressure: 16 barTemperature of pumped liquid: from - 10 °C to 120 °C
Submersible vertical electric pumpsSVI
Delivery: up to 120 m³/h
Head: up to 240 m
Power supply: 50 Hz
Power: from 0.37 kW up to 30 kW
Maximum operating pressure: 25 barTemperature of pumped liquid: from -10 °C to 90 °C
Delivery: up to 6.60 m³/h
Head: up to 25 m
Power supply: both single and three
phase 50 and 60 Hz
Power: from 1.10 kW up to 1.10 kW oTemperature of pumped liquid: to 35 C
Maximum immersion depth: 5m
Submersible Grinder Pump
Self priming centrifugal pumps with built
Delivery: up to 4.20 m³/h
Head: up to 53 m Power supply: both single and three- phase
50 and 60 Hz
Power: from 0.37 kW up to 1.10 kWMaximum operating pressure: 8 bar
BG
o oTemperature of pumped liquid: from -10 C to 40 C
LPG SUBMERSIBLE PUMPS
The most efcient way to pump LPG
Maintain optimum ow rates quietly to
enhance customer experience, pump LPG
greater distances, gain exibil ity in station
design and eliminate vapour lock conditions.
GLV-101 TANK DEGREE CONTROL PANEL
GL-101/1 DRAINED CONTROL PANEL GL-102 DRAINED CONTROL PANEL
GL-103 DRAINED CONTROL PANEL
GW SUPER PLUS 4 DEDECTORS 2 LEVELSINDICATED CONTROL PANEL
TANK LEVEL GAUGE
LPG STATİON EQUIPMENTS
LPG NOZZLE FILTER SMALL FILTER BREAKAWAY LPG HOSE
STR-LIN-617 EXPROOF GAS DEDECTOR
LPG PUMPS
BY-PASS VALVE
LPG 250 SERIES
By-pass valve: Differential bypass valves are
designed to protect pumps and system
components from excessive pressure damage,
and no LP gas pump installation is complete
without one. By-pass valves can be adjusted
from 0 bar to 15 bar.
3Model No: LPG 250-8 / Capacity 35m /h 20 Bar
Autogas Station Application
LPG TRANSFER PUMPS & EQUIPMENTS