personal data dr khairanum bt subari address...

1

PERSONAL DATA Name PROFESSOR DATO’ DR KHAIRANUM BT SUBARI

Address President’s Office

Universiti Kuala Lumpur

1016 Jalan Sultan Ismail

50250 Kuala Lumpur

Contact [email protected]

Tel : 603 2175 4000 (DL 603 2175 4141)

Fax : 603 2175 4333

Position Deputy President

Student Development & Campus Lifestyle

EMPLOYMENT 1988 - 1990 School of Physics Guru Universiti Sains Malaysia 1994 - 2001 School of Industrial Technology Lecturer Universiti Sains Malaysia 2001 - 2004 School of Mechanical Engineering Lecturer 2004 - 2005 Engineering Campus Assoc Prof Universiti Sains Malaysia 2005 -2007 Dean’s Office UniKL MSI Dean Kulim Hi Tech Park 09000 Kulim, Kedah 2007-2008 UniKL Chancellery Project Director 1016 Jalan Sultan Ismail 50250 Kuala Lumpur 2008 – 2013 Dean’s Office UniKL MITEC Dean/Head of Campus Persiaran Sinaran Ilmu, Bandar Seri Alam 81750 Johor Bahru, Johor Darul Takzim 2013 – present President’s Office Deputy President UniKL Chancellery Student Development & Campus Lifestyle

mailto:[email protected]

2

EDUCATION Ph.D 1994 School of Mechanical and Manufacturing Engineering University of Birmingham, U. K. M.Sc 1987 School of Physics Indiana State University, U. S. A. B.Sc 1884 School of Physics Indiana State University, U. S. A. AWARDS Best Paper 13th International Conference on ISO 9000 &

TQM (13-ICIT) 24 – 26 March 2008 Kuala Lumpur

Training Research Grant Asian Development Bank (ADB) at Department of Automatic Control

and Systems Engineering University of Sheffield, U. K. Nov. 1995 – February 1996 Academic Staff Higher Public Service Department and USM Education Scheme Award

at School of Mech. And Manuf. Engineering University of Birmingham, U. K. Sigma Phi Sigma Physics Honor Society, Indiana State

University, USA

CURRENT PORTFOLIO

Student Development & Campus Lifestyle (SDCL) 2016 - ongoing

1. Develop Ulul Albab program at 4 campuses as initial project – done

2. Develop UniKL Wakaf project – on going

3. Develop Best Practices for University Experience CL-CS – on going

4. Monitor GHOCs and Student Journey progress

5. Develop UniKL Signature CSR – on going

6. Develop UniKL Leadership Program for Student leaders – on going

7. Develop UniKL Career Advisory Centre – on going

8. Research SD-CITC on Graduate Employability – on going

3

9. Enhancement of MeSRA strategies on New and International Markets – on

going

10. Expand Student Financial Support funds and sources – on going

11. Enhanced Student support services to Boost Customer-based approach – on

going

Student Development & Campus Lifestyle (SDCL) 2013 - 2015

1. Develop an Integrated Value Based Learning & Teaching Model for UniKL -

completed

2. Develop High Order Critical Skills (HOCs) for Student Character Building –

completed

3. Develop UniKL Student Profiling – completed

4. Develop Student Character Building via JPAM - completed

5. Develop On-Line Student Events and Activities System – completed

6. Develop an Innovative Teaching & Learning for English and Pengajian Islam

– completed

7. Task Force for UniKL Residences Status – completed

8. UniKL Residences Standards – completed

9. Develop Work-Study Scheme – completed

10. Enhanced University Social Responsibility (USR) via UniKL CARE – on-going

11. Enhanced MeSRA (Marketing, Student Recruitment and Admission) – on-

going

4

TEACHING & SUPERVISION

School of Physics, USM

1. Electrical and Electronic Laboratory - First year BSc

2. Nuclear Physics - Diploma of Laboratory Technology

School of Industrial Technology, USM

1. Strength of Material

2. Design of Experiment

3. Metrology

4. Digital Systems and Metrology Laboratory

5. Electric Circuits

6. Electrical Laboratory

7. Semiconductor Devices

8. Semiconductor Devices and Electrical Machine Laboratory

9. Quality Control

School of Mechanical Engineering, USM

1. Production and Operations Management

2. Design of Production System

3. Engineering Management (Human Resource Management)

4. Quality and Reliability

5. Industrial Ergonomics and Safety

UniKL Malaysian Spanish Institute

1. Production Management

UniKL IPROM

1. Quality Engineering

UniKL MITEC

1. Introduction to Quality

5

Areas Of Expertise/Consultations :

TQM

1. Overview of TQM

2. 7 Basic Quality Tools

3. 7 Management and Planning Tools (7 New Quality Tools)

4. Benchmarking/Performance Evaluation

Quality Engineering & Technology Management

1. Basic Statistics/Data Collection & Evaluation

2. Industrial Statistics

3. Statistical Process Control

4. Design of Experiment (DOE)

5. Taguchi Techniques/Optimization

6. Failure Mode & Effects Analysis (FMEA)

7. Cost of Quality

8. Artificial Intelligence in Manufacturing

9. Lean Management

Metrology

1. Basic Metrology/Measurement

2. Measurement Techniques

3. Calibration

4. Uncertainty Analyses

5. Gauge R&R

6. Laboratory Management

6

Development of New Courses/Program

New Courses

1996/97 Metrology PPTI, USM

1996/97 Semiconductor Devices PPTI, USM

1998/99 Electric & Electronic circuits PPTI, USM

2001/2002 Quality & Reliability (only the Quality portion) PPKM, USM

2001/2002 Ergonomics & Industrial Safety PPKM, USM

(only Ergonomics portion)

2001/2001 Manufacturing/Operations Management PPKM, USM

2002/2003 Engineering Management II PPKM, USM

2008 Introduction to Quality UniKL MITEC

New Programs

1998-1999 - Bachelor of Engineering (Hons) in Mechatronics USM

2007-2008 - Bachelor of Engineering Technology (Hons) UniKL

in Quality Engineering

- Diploma Engineering Technology in Quality Engineering

2011 - Bachelor of Engineering Technology (Hons) UniKL

in Process Instrumentation & Control Engineering

- Bachelor of Engineering Technology (Hons) UniKL

in Plant Maintenance

7

Supervision

Name & Thesis/Project Title Level of Study Year

1. Mohamad Ikbar Abdul Wahab – Development of Intelligent Decision Support System for Selection of Process Improvement

PhD Main Supervisor 2016

2. Rahmat Roslan Awang - Critical Success Factors For Lean Agile Healthcare Deployment At Ministry Of Health’s Hospitals


3. Azrul Hisyam Abdul Rahman – UniKL CARE as a Branding and Marketing Tool


4. Mohd Amran Daril – Artificial Neural Network in Decision Making for Quality Tool Selection


5. Fairul Anwar Abu Bakar – Critical Success Factor and Multi-criteria AHP decision making for SME


6. Zalinda Othman - Integrated Approach in production Scheduling using Genetic Algorithm



1. Quek Siow San - Artificial Neural Network Applications in Pharmaceutical Product Development

MSc Co-supervisor

2001

2. Suresh a/l Gobee - Improved FMEA Risk Ranking Method by Integrating Fuzzy Logic

MSc Main Supervisor 2002

3. Goh Wei Yee - Time Series Prediction using Recurrent Neural Networks and Boosting : An Experimental Study in Pharmaceutical Product Formulation

MSc Co-supervisor 2002

4. Lee Chung Yeow - Quality Management System (QMS) Implementation in Malaysian Industry - Penang"

MSc Main supervisor

2002

5. Salina Budin - Guidelines to Uncertainty Calculations.

MSc Main supervisor

2003

6. Koay Leeng Sze - A Self Assessment Guideline for Evalauting Quality Activities/Systems in an Organization.

MSc Main supervisor

2003

8


7. Sahala Siallagan, Implementation of TQM in Medan manufacturing Industries

MSc Main supervisor

2004

8. Amjad M. R. Khalili, An Empirical Investigation of the Critical Factors for ISO 9000, TQM Two Dimensions and Manufacturing Performance

MSc Main Supervisor 2004

9. Kauthar A. Rhaffor Pembangunan Budaya Keselamatan Menyeluruh (Total Safety Culture - TSC) di Industri Malaysia

MSc Main Supervisor

2005

10. Elmy Marina Mohd Khamis Developing Guidelines and Preventive Accidents Program for Computer and Visual Display Terminals (VDT) for Malaysian Industries

MSc Main Supervisor

2005

11. Nurul Shahida Mohd Shalahim Developing a Framework of Facilities Design towards World Class Manufacturing

MSc Main Supervisor

2005

12. Fawad Ahmed Comparative Study Between Mixed Model Assembly Line And Flexible Assembly Line Based On Cost Minimization Approach

MSc Co-Supervisor

2008

13. Nor Haniza Binti Bakhtiar Jemily Kajian Penilaian Risiko Terhadap Keselamatan Pekerja Pemprosesan Buah Kelapa Sawit

MSc Co-supervisor

2008

14. Kamal Bahrin Ismail (1995) Kesan Proses Pemesinan Logam (Mesin Pengisar Hujung) terhadap sifat Permukaan Bahan yang Dimesin

BTech Main Supervisor 1995

15. Norliza Osman (1996) Membangunkan dan Melaksanakan Pengurusan Kualiti Menyeluruh di Southern Pipe Industry (M) Sdn. Bhd.: Kajian Awal Mengenai Konsep Pelanggan dan Pembekal Dalaman.


16. Mohd Rizal @ Nasuha Yaakub (1996) Sistem Pengukuran Gear Berkomputer - Hardware


17. Mohd Nazri Yousoff (1996) Sistem Pengukuran Gear Berkomputer – Software


9


18. Suriatul Amin Yahya (1997) Kualiti Re-Engineering di dalam Proses Pembuatan untuk Pembangunan Sesebuah Produk.


19. Tuan Muhd Indera Putera Tuan Abd Razak (1998) Model Perlaksanaan Re-Engineering di Meranti System and Services Sdn. Bhd., Bukit Minyak, Pulau Pinang.


20. Ong Lee Choo (1998) Kalibrasi Robot Scara : Analisis Penempatan Robot


21. Yong Mee Lee (1998) Kalibrasi Robot Scara : Pengukuran dan Pampasan Penempatan Robot


22. Ch'ng Geik Ling (1998) Pembangunan Sistem Kalibrasi dan Analisis bagi Peralatan Pengukuran.


23. Tan Ee Min (1998). Pembangunan Sistem Kalibrasi dab Analisis bagi Peralatan Pengukuran : Suatu Kajian Kes.


24. Roy Maxwell (1998). Pengoptimaan Parameter Algoritma Genetik menggunkan Kaedah Taguchi dan Rekabentuk Faktorial.


25. Ismail Hashim (1999). Autokalibrasi Robot.


26. Mohd Azlan Jaafar (1999). Pengenalan Sistem Autokalibrasi kepada Robot Koordinat Cartesian.

BTEch Main Supervisor 1999

27. Zaidi Amin Zainol (1999) Pembangunan Pakej Latihan FMEA.


28. Marajuddin Moleng (1999). Kajian Kes FMEI di Cirrus Sdn. Bhd.


29. Thow Soon Seng (1999) Model Pengukuran Prestasi : Pembinaan, Penggunaan dan Analisis : Kajian Kes


30. Ching Hok Lai (1999). Model Pengukuran Prestasi : Pembinaan, Penggunaan dan Analisis : Kajian Kes


10


31. Helmi Mohd. Isa (1999) Pembangunan Pakej Latihan Kalibrasi dan Pengoptimaan Proses Kalibrasi dalam Bidang Elektrik dan Tekanan


32. Lim Kian Chuan (1999) Pembangunan Pakej Latihan Kalibrasi dan Pengoptimaan Proses Kalibrasi dalam Bidang Elektrik dan Tekanan.


33. Ooi Siang Kueen (1999) Pengoptimaan Proses dan Pembagunan Pakej Kalibrasi Dimensi


34. Azizah Mohd. Yusop. (1999). Pengoptimaan Proses dan Pembagunan Pakej Kalibrasi Dimensi.


35. Suriyati (1999). Pengoptimaan Proses dan Pembangunan Pakej Kalibrasi Suhu.


36. Junaidah Sapuan (1999). Pembangunan awal ISO 9000 di Bahagian Spinning, Binamold Sdn. Bhd.


37. Aslindawati Abdullah (1999). Pembagunan Awal ISO 9000 di Bahagian Turning, Binamold Sdn. Bhd

BTech Main Spervisor 1999

38. Mohd. Mazid Mansor (2000). Pembangunan Makmal Kalibrasi


39. Aesrol Azizi (2000). Pembangunan Sistem Kalibrasi.


40. Julizana Mat Rasid (2000). Pembangunan Sistem Knowledge-Based untuk Penambahbaikan Kualiti.


41. Hanipah Hakim (2000) Proses Pengoptimuman Dalam Sistem Bioproses.


42. Hammidi Ayong (2000). Kajian Tentang Keberkesanan Perlaksanaan FMEA dalam Industri Pembuatan di Malaysia.


43. Che Wan Mohd Hairi Che Wan Chik (2001) Kajian Sistem Pengaliran Transdermal Iotophoresis Berorientasikan Pambangunan Litar Elektrik Arus Dedenyut - Rekabentuk Ujikaji


11


44. Mohd. Nazmy Zainal Abidin (2001) Kajian Sistem Pengaliran Transdermal Iotophoresis Berorientasikan Pambangunan Litar Elektrik Arus Dedenyut - Pembangunan Litar


45. Koay Meng Chin (2001) Penggunaan Rangkaian Neural kepada Masalah Klasifikasi dan Ramalan.


46. Tan Pei Yong (2001). Pembangunan Borang FMEA untuk Penambahbaikan Proses Pengeluaran.


47. Bunai Muling (2001) Penilaian Praktik Benchmarking dalam Industri Tempatan.


48. Rohaiza Muslimun (2002). Sistem Pakar (expert system) dalam aplikasi FMEA (Failure Mode and Effect Analysis) bagi penambahbaikan kualiti


49. Norhaliza Darani (2002). Sistem Pakar (expert system) dalam aplikasi SPC (Statistical Process Control) bagi penambahbaikan kualiti.


50. Ruzie Yanti Ahmad Khudri (2002). Teknik Penambahbaikan Kualiti menggunakan SPC dan Gage R&R : Kajian Kes di BCM Sdn. Bhd.


51. Nor Aidawati Othman (2002). Teknik Penambahbaikan Kualiti menggunakan QFD (Quality Function Deployment) dan FMEA : Kajian Kes di BCM Sdn. Bhd.


52. Nor Amalina Abdullah (2002). Kajian Kes TPM (Total Productive Maintenance) di Industri Perkhidmatan.


53. NorRazfizah Abd. Razak (2002). Pembangunan Kriteria Kadaran Pembekal melalui kaedah Sistem Pengurusan Rantaian Bekalan (Supply Chain Management System).


54. Mohd. Azlan Saadin (2002). Kajian Perlaksanaan Kriteria Kadaran Sofwer.


55. Mohd. Khairul Kamarudeen (2002). Pembangunan Kriteria Kadaran Sofwer.


12


56. Ahmad Ridzuan Madian (2002) Pembagunan Template Kos Kualiti


57. Abd. Karim Daud (2002) Kajian Keberkesanan ISO 9000 di Industri di Malaysia.


58. Tan See Keat (2002). Pembangunan Program Kualiti

BEng Main Spervisor 2002

59. Lukman Wan Mat Daud (2002). Pendekatan QFD di dalam Kaedah Rekabentuk Kejuruteraan bagi Menambahbaik Keselamatan dan Kesihatan Pekerjaan di Industri Pembuatan Tayar.


60. Ismail Ainuddin (2002). Kajian mengenai perlaksanaan dan implikasi ke atas Pendedahan Pekerja kepada Bahan Kimia Merbahaya di Industri Kecil dan Sederhana.


61. Mokhriz Ajis (2003). Kajian Pelaksanaan Kaedah 6-Sigma di Ford (M) Sdn. Bhd.


62. Shaliza Azreen Mustafa (2003) Penggunaan Pelan Pensampelan dan Penentuan Saiz Sampel Pelan Pensampelan di IDT.


63. Mazwan Noor (2003) Kajian Peralihan ISO 1994 kepada ISO 2000


64. Norul Zuraimah Mas Hana (2003) Kajian Penilain Risiko dan Keselamatan di Industri : Kajian Kes.


65. Nurul Shahidah Mohd Shalahim (2003) Latihan Kesedaran dan Latihan Keselamatan di Kalangan Pekerja Industri.


13


66. Elsa Joy (2004) CBL package of 7 QC Tools BEng Main Spervisor 2004

67. Mohd Nur Afendy Md Yusoff (2004) Designing an Automated Guided Vehicle in a Kanban Production System.


68. Mohd Fauzi Masadi (2004) Design and Fabrication of a manual remote control robot for disposal of toxic waste in chemical plants


69. Chan Tian Kooi (2005) Development of 6-sigma tutorial package.


70. Ng Poh Yin (2005) Development of 6-sigma Training package.


71. Eddy Kamaruddin (2005) Development of SPC Training Package


72. Muhamad Najwa Nizam Mohamed Critical Success Factors for Manufacturing Sustainability

BEng

Tech

Main Supervisor 2011

73. Intan Syafienas - Excellence model based framework in higher education

BEng

Tech


74. Siti Khadijah Ghazali – Development of Kanban System in Kosiswa

BEng

Tech


14

CONTRIBUTION TO THE UNIVERSITY

No Date Position Section /

Institute / University Level

i. Administrations

UNIKL

1. 2005 - 2007 Dean UniKL MSI University

2. 2007 - 2008 Project Director, UniKL Pasir Gudang University

3. 2008 - 2013 Dean/Head of Campus UniKL MITEC University

4 2011 - 2013 Chairman Technical Committee for UniKL MITEC Tender Implementation

University

5 2013 – present Deputy President Student Development & Campus Lifestyle

University

6 2014 - 2015 5S Champion University

USM

5. 2003 – 2005 Program Chairman (Practical & Laboratories), School of Mechanical Engineering, USM

School

6. 2004 – 2005 Editorial committee member - Engineering in Focus (Bulletin for Engineering Campus, Universiti Sains Malaysia)

Engineering

Campus, USM

7. 1999 – 2000 Acting Program Chairman, School of Industrial Technology (9 mths)

School

8. 1996 - 2000

Member of the Advisory and Counseling Panel, School of Industrial Technology

School

9. 1996 - 2000 Secretary and Committee Member of the Unit Exemption Committee, School of Industrial Technology

School

10 1998 Chairman for A Special Research Committee to Investigate the Root Cause of Students' Failures for the School of Industrial Technology.

School

15

ii. Academic

UNIKL

1. 2007 - 2008 Technical Expert Committee Member for Program Development DET and BET Quality Engineering

Institute/University

2. 2007 - 2008 Coordinator for Technical Expert Committee for Program Development Diploma and Bachelor in Industrial Logistics

Institute/University

3. 2008 - 2010 Editorial Committee of UniKL Research Journal University

USM

4. 2000 Secretary Organizing Committee for Regional Symposium on Quality and Automation 2000, 4 May 2000, Penang. (International Conference)

University/Internati

onal

5. 1998 - 1999 Committee member for program development of Bachelor Engineering in Mechatronics.

University (USM)

RESEARCH AND PUBLICATION (i) RESEARCH ACTIVITIES

No Name of Research/

Consultation

Principal Researcher/Co-Researcher

Sponsor / Funding Project

Date

Organisation RM

1 Development and Application of an Electronic Device for Drug Delivery : A Feasibility Study

Principal

researcher

STRG 19,000.00 1999 - 2001

2 Development of an Intelligent System for On-Line Process Monitoring and Fault Diagnosis,

Co-researcher Long Term IRPA Project No. : 04-02-05-0010

200,000.00 2000 - 2002

3 Computerized Maintenance Management System for Palm Oil Manufacturing Industries

Co-researcher Yayasan

FELDA

84,000.00 2005 - 2006

16

No Name of Research/

Consultation

Principal Researcher/Co-Researcher

Sponsor / Funding Project

Date

Organisation RM

4 The Development Of Manufacturing Sustainability Framework For Malaysian Industries Utilizing A Macro-Supply Chain (Mcsc) Approach

Principal

researcher

FRGS, MOHE 23,000 2010 - 2012

5 Development of Manufacturing Sustainability Framework for Electrical and Electronics Industries in Malaysia: Integrated Critical Success Factor

Principal

researcher

STRG 19,000 2010 - 2012

(ii) PUBLICATIONS

No Publication Title Name of Publisher/Organiser

Date of Publication

1 Research report K.J. Stout, P. J. Sullivan, W. P. Dong, E. Mainsah, K. Subari. (1991) The Development of an Integrated Approach to 3-D Surface Finish Assessment. Interim Report No. 1. EC Contract No. 3374/1/0/170/90/

EC Contract No. 3374/1/0/170/90/2

1991

2 Kamaruddin, Shahrul, Mokhtar, Mohzani, Subari, Khairanum and Othman, Zalinda (2007) Scheduling With Alternatives Machine Using Fuzzy Inference System And Genetic Algorithm.

Project Report. Universiti Sains Malaysia

2007

3 Chapter in Book Applications and Science in Soft Computing in Advances in Soft Computing Series, Springer-Verlag 2003

Springer-Verlag

2003

17


Date of Publication

4. International Journal Fairul Anwar Abu Bakar, Khairanum Subari, Amran Daril (2015), Critical Success Factors of Lean Six Sigma Deployment : A Current Review

International Journal of Lean Six Sigma (IJLSS)

2015

5 Amjad Al Khalili and Khairanum Subari (2013), The Interrelationship between ISO 9000 and Total Quality Management : An Empirical Investigation with a Focus on Soft and hard TQM Dimensions

International Journal of Services and Operations Management (IJSOM)

2013

6 Amjad Al Khalili and Khairanum Subari (2013), Understanding the Importance of TQM Dimensions: Critical Review of Soft and Hard TQM Aspects

International Journal of Services and Operations Management (IJSOM)

2013

7 Amjad Al Khalili and Khairanum Subari (2013), Understanding the linkage between soft and hard Total Quality Management: Evidence from Malaysian Manufacturing Industries

Jordan Journal for Mechanical and Industrial Engineering

2013

8 Sulaiman, O., Hashim, R., Subari, K and Liang, C. K. (2008), Effect of sanding on surface roughness of rubberwood

Journal of Materials Processing Technology

2008

9 W.Y. Goh, C.P. Lim, K.K. Peh, and K. Subari (2002), “Application of a Recurrent Neural Network to Prediction of Drug Dissolution Profiles”,

Neural Computing and Applications, vo1 10(4), pp. 311-317

2002

10 Zalinda Othman, Khairanum Subari, and Norhashimah Morad (2002) "Application Of Fuzzy Inference Systems And Genetic Algorithms In Integrated Process Planning And Scheduling."

International Journal of the Computer, the Internet and Management. Vol. 10 No. 2 (May - August, 2002).

2002

11 W.Y. Goh, C.P. Lim, K.K. Peh, and K. Subari (2001), “A Recurrent Neural Network Approach to the Prediction of Drug Dissolution Profiles”

International Journal of Knowledge-based Intelligent Engineering Systems, vol 5(2), pp.69-75

2001

18

12. J. Simào, D.K. Apinwall, M.L.H. Wise, K. Subari (1996), “Surface texture transfer in simulated tandem and temper mill rolling using electrical discharge textured rolls”

Journal of Materials Processing Technology, Volume 56, Issues 1–4, January 1996, Pages 177-189

1996


Date of Publication

12 National Journal Zalinda Othman, Khairanum Subari and Norhashimah Morad, ‘Job Shop Scheduling with Alternative Machines using Genetic Algorithms’,

Jurnal Teknologi D, Bil 41, Disember 2004

2004

CONFERENCE

No Name of Conference Conference Paper Title Date of Conference

1 International Conference Khairanum Subari, Ruzainah Ali, Zalizah Awang Long Creating World Class University: UniKL Insight Towards Alignment to National Strategies

12th QS Asia-Pacific Professional Leaders in Education (QS-APPLE) Conference, PICC, Putrajaya

2016

2 Khairanum Subari, Ruzainah Ali, Kamaruzzaman Ismail Student Success and Employability: The Insight of UniKL Experience

6th QS Maple, Al Ain, Dubai 2016

3 Khairanum Subari An Integrated Value-based Learning and Teaching Model

2014 International Educational Conference (IETC2014), Chicago, USA

2014

4 Khairanum Subari and Koay Leeng Sze (2008) A Methodology For Developing A Self-Assessment Tool To Measure Quality Performance In Organizations (A Malaysian Perspective)

13th International Conference on ISO 9000 & TQM (13-ICIT) 24 – 26 March 2008 Kula Lumpur

2008

5 Shaliza Azreen Mustafa, Shahrul Kamaruddin, Mohzani Mokhtar, Zalinda Othman and Khairanum Subari (2006), Application of Quality Function Deployment in identifying ergonomics programs for Malaysia manufacturing industries

International Conference on Technology Management, ICTM 2006, Kuala Lumpur

2006

19


6 Mazwan Noor, Khairanum Subari and Zalinda Othman (2004), Adopting lean principles in planning: A case study

Second International Industrial Engineering Conference, IIEC-2004, Riyadh, Saudi Arabia, November 2004 (proceeding)

2004

7 Shaliza Azreen Mustafa, Khairanum Subari & Zalinda Othman, Framework of proper usage of computers and visual display terminals for Malaysian industries

Second International Industrial Engineering Conference, IIEC-2004, Riyadh, Saudi Arabia, November 2004 (proceeding)

2004

8 Muhammad Suzuri, Suresh Gobi and Khairanum Subari (2002), "A New Ranking Method For Fuzzy FMEA".

4th International Conference on Recent Advances in Soft Computing, Nottingham, UK. 12-13 December 2002

2002

9 Z.A. Aziz, C.P. Lim, and K. Subari (2002), “Industrial Application of Performance Quality Techniques. Part 1 : A Guideline for Planning Industrial Experiments”

Conference on Quality, Kuwait, 10-13 March, 2002

2002

10 C.P. Lim, S.S. Quek, K. Subari, K.K. Peh, and Z.A. Aziz (2002), “Industrial Application of Performance Quality Techniques Part II: A Case Study in Pharmaceutical Industry”

Conference on Quality, Kuwait, 10-13 March, 2002.

2002

11 Khairanum Subari, Koay Leeng Sze and Wan Mansur Wan Muhammad (2002), "Development of Performance Measurement Model to Evaluate Quality Activities/Systems in Organizations : Part I : Model Development".

Conference on Quality, Kuwait, March 10-13, 2002

2002

12 Khairanum Subari, Koay Leeng Sze and Wan Mansur Wan Muhammad (2002), "Development of Performance Measurement Model to Evaluate Quality Activities/Systems in Organizations : Part II : Results and Analysis",.


2002

20


13 Wan Mansur Wan Muhamad, Khairanum Subari and Lokman Mohd. Fadzil (2002), "A Strategy Towards Global Competitiveness : Internet-Based Quality Assessment",.


2002

14 Zalinda Othman, Khairanum Subari & Norhashimah Morad (2001), Optimization of process planning and scheduling using genetic algorithms

First International Conference on Mechatronics, Kuala Lumpur, Malaysia. 2, pp.562-570. 2001 (proceeding)

2001

15 S.S. Quek, C.P. Lim, K.K. Peh, and K. Subari, (2001) “Application of an Intelligent System to Pharmaceutical Product Development”

Proceedings of the 1st International Conference on Mechatronics, vol II, pp. 524-530.

2001

16 C. P. Lim, Khairanum Subari and Feng Lim Wong. (2001) Development and Application of a Knowledge-based FMEA System for Manufacturing Industries..

First International Conference on Mechatronics ICOM'01, 12-13 February 2001, Kuala Lumpur

2001

17 Siow San Quek, C.P. Lim, Kok Khiang Peh, and Khairanum Subari. (2001) Application of an Intelligent System to Pharmaceutical Product Development.

First International Conference on Mechatronics ICOM'01, 12-13 February 2001, Kuala Lumpur.

2001

18 Zalinda Othman, Khairanum Subari, and Norhashimah Morad (2001). Optimization of Process Planning and Scheduling using Genetic Algorithm

First International Conference on Mechatronics ICOM'01, 12-13 February 2001, Kuala Lumpur.

2001

19 Suresh Gobee, Khairanum Subari, and Mohammad Suzuri Hitam. (2001) FMEA risk ranking using a combination of Quantitative and Qualitative Ranking Information.

First International Conference on Mechatronics ICOM'01, 12-13 February 2001, Kuala Lumpur

2001

20 S.S. Quek, C.P. Lim, K.K. Peh, and K. Subari, (2000) “Application of Artificial Neural Networks to Pharmaceutical Product Development”,

The 5th Online World Conference on Soft Computing in Industrial Applications. (WSC5) . Paper #09

2000

21


21 W.Y. Goh, C.P. Lim, K.K. Peh, and K. Subari, (2000) “A Neural-network-based Intelligent System for Time-series Prediction Problems in Product Development”,

IEEE International Conference on Intelligent Systems and Technologies for the Next Millenium (TENCON2000), vol. I, pp. 151-155.

2000

22 Suresh Gobee, Khairanum Subari and Muhammad Suzuri Hitam (2000).

Comparing Traditional Fmea Risk Priority Number Ranking with Fuzzy FMEA Risk Ranking: A Case Study in Condenser System.

The International Conference on Intelligent Technologies (InTech'2000), Bangkok, Thailand, Dec. 13-15, 2000, pp.299-307.

2000

23 S. Gobee, K. Subari, M. S. Hitam. (2000) Improved FMEA Risk ranking Method using Fuzzy Logic.

Regional Symposium on Quality and Automation 2000, 4 May 2000, Penang.

2000

24 J. Simao, D. K. Aspinwall, M. L. Wise, K. Subari. (1993) Surface Texture Transfer in Simulated Tandem and Temper Mill Rolling Using Electrical Discharge Textured Rolls.

International Conference On Advanced Materials and Processing Technologies. 24-27 August 1993

1993

1 National Conferences: Shaliza Azreen Mustafa, Khairanum Subari, Zalinda Othman, Shahrul Kamaruddin & Mohzani Mokhtar (2005), Development of a framework in enhancing ergonomics practices for computer user in Malaysian industries,

Conference on Computer Integrated System, ATCI 2005, Kuala Lumpur

2005

2 Amjad M. R. Khalili, Khairanum Subari, Shahrul Kamaruddin (2004) An Empirical Investigation of the Critical Factors for ISO 9000, TQM Two Dimensions and the Overall Manufacturing Performance

NAPCOL 2004 2004

3 W.Y. Goh, C.P. Lim, K.K. Peh, and K. Subari, (2000) “Prediction of In-vitro Drug Dissolution Profiles using a Recurrent Neural Network”,

The 15th Scientific Meeting of the Malaysian Society of Pharmacology and Physiology.

2000

22


4 S.S. Quek, C.P. Lim, K.K. Peh, and K. Subari, (2000) “Confidence Interval Estimation of Artificial Neural Network Performance using Bootstrap Method-A Case Study in Pharmaceutical Product Development”,

The 15th Scientific Meeting of the Malaysian Society of Pharmacology and Physiology.

2000

5 Zalinda Othman, Khairanum Subari and Norhashimah Morad. (2000) Application of Fuzzy Inference Systems and Genetic Algorithms in the Optimization of Process Planning and Scheduling .

National Conference on Management Science/Operations Research, November 2000, Penang

2000

1 Technical report, bulletin, colloquium, seminar etc Noor Ain Ibrahim, Zalinda Othman and Khairanum Subari (2005) A Preliminary Study On Layout Design Based On Make To Order Environment

Proceedings of the 4th Mechanical Engineering Research Colloquium (MERC 2005/1) School of Mechanical Engineering, USM, Penang, Malaysia, 27-29 January 2005

2005

2 A Comparative Study Of Flexible Assembly Line And Mixed Model Assembly Line, Fawad Ahmed, Zalinda Othman, Khairanum Subari, Arif Suhail,

Proceedings '''of the 4th Mechanical Engineering Research Colloquium (MERC 2005/1) School of Mechanical Engineering, USM, Penang, Malaysia, 27-29 January 2005

2005

3 Elmy Marina Mohamad Khamis, Khairanum Subari & Zalinda Othman, A preliminary study of ergonomics and quality function deployment awareness in Malaysian industries


2005

4 Noor Ain Ibrahim, Zalinda Othman & Khairanum Subari, A preliminary study on layout design based on make-to-order environment. In proceeding of the research colloquium, School of Mechanical Engineering, USM, January 2005


2005

23

No Publication Title Name of Publisher/Organiser Date of Publication

5 Shaliza Azreen Mustafa, Khairanum Subari & Zalinda Othman,The awareness of ergonomics in Malaysian manufacturing industries, In proceeding of the research colloquium, School of Mechanical Engineering, January 2005


2005

CONSULTANCY / ENTREPRENEURSHIP

No Name of Consultation / Entrepreneurship

Joint Member

Sponsor/ Funding Project Date

Organisation RM Begin Complete

1. Technical assessor panel IGS R&D grant entitiled "GSM Car Alert System (Car Safe version 1)"

Technical

Panel

MOSTI Honororium 2004 2004

2. 2 days course in Metrology and Calibration - In-house trainning for Perwaja (1 day at Perwaja, Gurun and 1 day laboratory work in USM)

Trainer PERWAJA Honororium

3. Sharp-Roxy, Sungai Petani, Kedah i. 7 QC Tools ii. Introduction to

TQM

Trainer Sharp-Roxy Honororium May

2003

Nov 2003

4. B. Braun, Penang, World Class Thinking, Building a World Class Organization

Trainer B. Braun Honororium 18 July

2003

5. Introduction to Kaizen. Soritsu Technology (M) Sdn. Bhd. Perai

Trainer Soritsu Technology (M) Sdn. Bhd. Perai

Honororium 30 July 2003

6. Certificate for Quality Technician

Co-organizer and Trainer

PPTI, USM Honororium 2001 2006

24

ACADEMIC LEADERSHIP AND ESTEEM

Dates Accomplishment / Achievement Level

(International/National or PhD/Master)

(a) Academic Accolade or Award

1999 CICHE Visitor (Project 730F: Instrumentation & Automation) to University of Lancaster,.

International

1995-1996 Asian Development Bank Research Award - University of Sheffield

International

(b) Appraiser / Examiner

2000 Internal Examiner for Tham Yuen Fong - Kajian Aktiviti Kualiti antara Pembekal dan Pelanggan, USM

MSc.

2001 Internal Examiner for Yii Hee Kim - Pembangunan Rangka Hidbrid Berasaskan Neuro-Genetik untuk Proses Percetakan Perekat Pateri. USM

MSc.

2002 Internal Examiner for Kifayah Amar - Kajian Pelaksanaan Kualiti dalam Organisasi-organisasi Pengeluaran di Indonesia. USM

MSc

2002 Internal Examiner for Kuan Mei Ming - Development of Neural Network-Based Intelligent Systems for Medical Pattern Classification with Missing Features. USM

MSc

2002 Internal Examiner for Amar Singh - Measuring Cost Of Quality : A case study. USM

MSc

2003 External Examiner for Zaini Abdullah - A Total Quality Management Driven Performance Management System : Multi-Source Assessment and the issue of Fairness. UUM.

PhD

2003

Internal Examiner for Jeevan Kanesan - Optimization of Component Placement on PCB using Genetic Algorithm. USM

MSc

2005 External Examiner for Hilma Raimona Zadry - The Integration of TQM and Theory of Constraints Implementation in Malaysian Automotive Suppliers. UTM.

MSC

2009 External Examiner for Che Padzilah bt Yaacob – A Study of Quality Tools and techniques Employed in Perlis and Kedah Manufacturing Companies. UniMAP.

MSc

2009 External Examiner for Elita Amrina – Manufacturing Performance Measurement Tool for Small and Medium-Sized Enterprises. UTM.

MSc

25

Dates Accomplishment / Achievement Level

(International/National or PhD/Master)

2010 The 11th Asia Pacific Industrial Engineering & Management Systems (APIEMS 2010) Conference

International - Technical Reviewer

(c) Visiting Professor / Fellowship

1999 "Computaional Intelligence Research Group (CIRG) activities at Universiti Sains Malaysia", Graduate Seminar, University of Lancaster

International

1999 "Calculation of Measurement Uncertainties", 3rd Year Engineering, Department of Engineering, University of Lancaster

International

(d) Academic Journal Article Appraiser / Technical / Scientific Appraisal Committee

1998 Journal of Industrial Technology, SIRIM. Measurement of Surface Profile of a Computer Hard Disk Using Optical Flat.

National

2003 Jurnal Teknologi, UTM. Pembentukan Sistem Pembangunan Proses : Ke Arah Pengilangan Bertaraf Dunia

National

2015 Jordan Journal Of Mechanical And Industrial Engineering - Factors Affecting the Competitiveness of the Food Industry by Using Michael Porter's Five Forces Model Case Study in Hamadan Province, Iran.


2015 International Journal of Services and Operations Management (IJSOM) - Understanding Contemporary Models for Organizational Sustainability: Critical Review


2016 International Journal of Services and Operations Management (IJSOM) - Quality Management System and Sustainability: A Malaysian Perspective


2017 International Journal of Industrial and Systems Engineering (IJISE) - Quality Management Practices and Sustainable Performance: Examining the Role of Soft TQM as Mediator


26

PROJECTS STUDENT DEVELOPMENT & CAMPUS LIFESTYLE

1. UniKL CARE – Banjir di Kuantan & Johor

2. UniKL CARE – Project MESRA SISWA Ketereh

3. UniKL CARE – Project Selatan Thailand

4. UniKL CARE International – Acheh, Kemboja, Vietnam

5. Student Leadership Discourse

i. Tan Sri Datuk Seri Panglima Anuar Musa – 3rd March 2014

ii. Tan Sri Arshad Ayub – 9th April 2014

iii. Prof Dr Teo Kok Seong – 14th May 2014

iv. Tun Dr Mahathir bin Mohamad – 5th November 2014

6. Global Village 2014 – organized by SDCL UniKL, sponsored by MARA,

participations from UniKL. MRSM and IPMA

7. UniKL Enactus – semi finals

MOTIVATIONAL TALK/SERVICES

Speaker :

1. "Techniques in Creative Problem Solving." School of Industrial Technology,

1997-1999.

2. "Data Analysis in Experimentation." School of Industrial Technology, 1998.

3. "Pelajar Cemerlang, Ibubapa Girang." Persatuan Kakitangan Pusat

Pengajian Teknologi Industri, 1998.

4. "Mencari Hati Karma…." Bengkel Perkongsian Bijak. Pusat Pengajian

Teknologi Industri, Universiti Sains Malaysia, 1999

5. "Peningkatan Diri Dalam Kerjaya." Maktab Perguruan Persekutuan Pulau

Pinang, 1999.

6. Sijil Juruteknik Kualiti, Pusat Pengajian Teknologi Industri, 1999

7. "In Search of the Perfect Q…" Komag Quality Fair 2000.

8. Sijil Juruteknik Kualiti 2, Pusat Pengajian Teknologi Industri, 2000

9. "Budaya Kerja Berkualiti" Maktab Perguruan Persekutuan Pulau Pinang.

27

10. "7 Management and Planning Tools" Personel Pentadbiran Universiti Sains

Malaysia, August 2000.

11. "7 New Quality Tools for TQM" Novotel, Penang October 2001

12. Sijil Juruteknik Kualiti 3, Iomega (M) Sdn. Bhd., 2001

13. Bengkel KMK, Intan Wilayah Tengah 25-28 March 2002

14. "Profesionalisma Di dalam Kerjaya", Hari Kesedaran Moral Peringkat Maktab

Perguruan Persekutuan Pulau Pinang, 17 April 2002

15. "7 Management and Planning Tools", Universiti Sains Malaysia, May 2002

16. Bengkel KMK, Universiti Sains Malaysia, 14-17 Januari 2003

17. Introduction to TQM, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 25-26

February, 2003

18. 7 QC Tools, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 11-12 March, 2003

19. Penceramah Kem Motivasi, Sek. Keb. Sungai Kechik, 29 March 2003

20. 7 QC Tools, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 5-6 May, 2003

21. Introduction to TQM, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 7-8 May

2003

22. Bengkel KMK, PERHEBAT, Kem Sungai Buloh, 19-22 May, 2003

23. 7 QC Tools, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 16-17 June 2003

24. Introduction to TQM, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 18-19 June,

2003

25. 7 QC Tools, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 14-15 July, 2003

26. Introduction to TQM, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 16-17 July,

2003

27. World Class Thinking, building a world class organization, B. Braun, Penang,

18 July 2003

28. Introduction to Kaizen. Soritsu Technology (M) Sdn. Bhd. Perai, 30 July

2003

29. 7 QC Tools, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 4-5 August, 2003

30. Introduction to TQM, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 6-7 August,

2003

28

31. 7 QC Tools, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 2-3 September, 2003


September, 2003

33. 7 QC Tools, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 8-9 October, 2003


October, 2003

35. 7 QC Tools, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 10-11 November,

2003


November, 2003

37. 7 QC Tools, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 6-7 January, 2004

38. Introduction to TQM, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 8-9 January,

2004

39. 7 QC Tools, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 12-13 February, 2004


February, 2004

41. 7 QC Tools, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 4-5 March, 2004


March, 2004

43. Introduction to TQM, Sharp-Roxy (M) Sdn. Bhd. Sungai Patani, 20-21 April,

2004

44. Introduction to 7 QC Tools, Kobe Precision Technology, 17 May, 2004

45. Introduction to FMEA, Kobe Precision Technology, 19 May, 2004

46. Penerapan Budaya Kualiti, Vistana Hotel, 31 May, 2004 for School of

Chemical Engineering, Universiti Sains Malaysia.

47. Bengkel KMK untuk Fasilitator, 28 Februari – 1 Mac 2005 for School of

Mechanical Engineering, Universiti Sains Malaysia.

48. Menjana Sikap Positif , 16 April 2005, Sek Men Agama Diniah, Kupang,

Baling, Kedah

49. Striving for ‘A’ Workshop UniKL MITEC 2011

29

50. Invited Panel “Mengarusperdana Latihan Kemahiran’ Symposium Carnival

Skills Malaysia KEPAK 2011 23 June 2011 at Persada, Johor organized by

Jabatan Pembangunan Kemahiran Wilayah Selatan, Kementerian Sumber

Manusia

51. Invited Panel for Forum Mencari Pasangan Soleh/Solehah organized by

Jabatan Agama Islam, Johor 1 July 2011 at Kolej Matrikulasi Ledang, Johor

52. Teaching Style vs Learning Style Workshop UniKL MITEC 2012

53. Mentor Mentee Effective Habits Workshop UniKL MITEC 2012

personal data dr khairanum bt subari address...

Documents