permitting procedures hazardous

1

HAZARDOUS WASTES EMB REGIONAL OFFICES B. For Hazardous Wastes and Substances (Title III): I. Registration of Hazardous Waste Generator

The generator of hazardous waste is required to notify or register with the Department on the type and quantity of wastes generated and be issued the corresponding DENR Identification Number. DENR Memorandum Circular No. 2002-12 delegated to the EMB Regional Offices the Registration of Hazardous Waste Generators, including the issuance of Permit to Transport.

Requirements:

a. Duly accomplished Hazardous Waste Registration Form A b. Process Flow Diagram of all waste streams c. Material Balance of manufacturing process d. Analysis of wastes e. Other relevant information e.g. planned changes in production processes or

output

2

PROCEDURAL FLOW

Registration for Hazardous Wastes Generator’s DENR ID Number

15 days Evaluation & Site Inspection

Comments/Revision

2 days

OFFICE OF THE REGIONAL DIRECTOR (Approval/Disapproval)

2 days

1 day

Yes

No

Yes

No

SCREENING OFFICER

Requirements Complete?

RECORDS SECTION

HAZARDOUS WASTE MANAGEMENT SECTION

With Additional Requirements?

POLUTION CONTROL DIVISION CHIEF

PROPONENT

RECORDS SECTION (Releasing)

3

Steps:

a. Applicant/Generator submits duly accomplished Hazardous Waste Generators (HWG) Form A together with the complete requirements .

b. The Screening Officer shall determine the completeness of the documents. - If the documents are complete, pay the required fees. - If not complete, the documents will be returned to the applicant.

c. EMB Records Section receives the complete documents and forward to the Office of the Hazardous Waste Mgt. Section (HWMS).

d. HWMS evaluates/processes the application, conduct sites inspection, prepares evaluation report and assigns HWG DENR ID No. and forwards to Chief, Pollution Control Division (PCD)

e. The PCD Chief reviews and recommends approval/denial of the application f. ORD approves/deny the application

A maximum of 20 working days processing time application for the Registration of Hazardous Waste Generators

4

Form A: Registration form for HW Generator Section A1. General Information of Generator

1. DENR ID:

*1 2. Date of issued (D/M/Y):

/ / *1

3. Name of Firm: 4. Plant Address: 5. Date of Establishment:

PO No. : Expiry Date:

ECC No. : Date Issued:

6. Tel: 7. Fax: 8. Office Address: 9. Tel: 10. Fax: 10. Pollution Control Officer:

Certificate of Accreditation No.

11. Tel:

12. Fax:

13. e-mail:

14. General Description of Business/Operation

Philippine Standard Industrial Classifications 15. Primary:

16. Secondary:

1. 4.

2. 5.

16. Major Products:

3. 6. 17. Authorized Capitalization (Pesos/year) 18. Paid-up Capitalization (Pesos/year) 19. Approximate Annual Turn-over (Pesos/year)

20. Total No. of Employees: 21. Admi. Employees: 22. Plant Employees: Please append the following:

? (1) Process flow diagram of all waste streams ? (2) Material Balance of manufacturing process ? (3) Analysis of waste(s) ? (4) Other relevant information e.g. planned changes in production processes or output

I certify that the enclosed information is a true and accurate record as available. Pollution Control Officer: Signature: Date (D/M/Y): / /

*1: to be filled up by EMB Registration Fees O.R. No. Date

5

II. Permit to Transport Hazardous Waste (Can be secured by either Waste Generator or Treater).

Requirements: a. Official Letter of request from the transporter (Pro-forma) b. Duly accomplished Application Form (Generator or Treater) c. Memorandum of Agreement or Affidavit of Joint Undertaking between the

transporter, generator and treater/recycler/disposal facility indicating responsibilities and liabilities of each party (Pro-forma, to include the responsibility of Waste Generator to submit duly accomplished Manifest Form)

Note: * Transport Permit shall be issued by the EMB Regional Office where the treater is located.

** If application will be submitted to the provincial office, five (5) days will be given to that office to transmit the application to the regional office after which the timeframe of 20 working days will start.

6

PROCEDURAL FLOW

Application for a “Permit to Transport” Hazardous Wastes

Comments/Revision 1 day

OFFICE OF THE REGIONAL DIRECTOR (Approval/Disapproval)

3 days

15 days – Evaluation and Site Inspection

1 day

Yes

No

Yes

No

SCREENING OFFICER


RECORDS SECTION



POLUTION CONTROL DIVISION CHIEF

PROPONENT

RECORDS SECTION (Releasing)

7

Steps: a. The Applicant/Transporter submits letter of request enclosed with duly

accomplished Application Form and the complete requirements; b. The Screening Officer shall determine the completeness of the documents.

- If the documents are complete, pay the required fees. - If not complete, the documents will be returned to the applicant;

c. Records Section of EMB Regional Office receives the complete documents and forwards to the Hazardous Waste Management Section (HWMS);

d. Hazardous Waste Management Section (HWMS) processes/evaluates the application, conducts field inspection, prepares report and indorse the evaluation report to the Chief Pollution Control Division (PCD);

e. The PCD Chief reviews and recommends approval/denial of the application; f. ORD approves/denies application

A maximum of 20 working days processing time for Permit to Transport

Hazardous Wastes

8

APPLICATION FORM FOR TRANSPORT PERMIT Name of Applicant : Plant Address: Tel. No

Type of Waste : Class No. : Quantity of Waste : Brief description of waste applied for transport : __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Generator : ID NO. Transporter : ID NO. Treater : ID NO. ATTACHMENTS :

a. Official Letter of request from the Transporter (Pro-forma) b. Memorandum of Agreement or Affidavit of Joint Undertaking between the transporter, generator and treater/recycler/disposal facility

indicating responsibilities and liabilities of each party (Pro-forma, to include the responsibility of Waste Generator to submit duly accomplished Manifest Form)

___________________________________ Applicant’s Signature

9

EMB CENTRAL OFFICE I. Registration of Hazardous Waste Transporter

The transport of hazardous waste requires the transporters to be registered with, and prior permit secured, from the Department or Bureau of which registration of the transporter and the application for the issuance or amendment of the same (the permit) shall be made in accordance with the form and in manner prescribed hereunder:

Requirements:

a. Official Letter of Request b. Duly accomplished Registration Form for Hazardous Waste Transporter c. Business Permit/SEC Registration Certificate d. Description/Specification of Conveyance. Details of Transport Service e. Photographs of conveyance (inside and outside shots of vehicle) f. Sketch/Provision of a garage g. Proof of ownership of vehicle (Certificate of Registration and Contract of

Lease and/or Deed of Sale, if applicable) h. Certification from the Bureau of Fire Protection, in case of tank lorry i. Contingency/Emergency Preparedness Plan and Certificate of Training from

EMB j. Accountability Statement (duly notarized) k. Copy of the Certificate of Registration and Official Receipt ( LTO)

A maximum of 20 working days processing time application for Registration of Hazardous Waste Transporter.

10

PROCEDURAL FLOW

Registration of Hazardous Waste Transporter

Comments/Revision 2 days

OFFICE OF THE DIRECTOR (Approval/Disapproval)

2 days


1 day

Yes

No

Yes

No

SCREENING OFFICER


RECORDS SECTION



ENVIRONMENTAL QUALITY DIVISION CHIEF

PROPONENT

(Releasing)

11

Steps:

a. Applicant/Transporter submits official letter of request together with duly

accomplished Registration Form and the complete requirements. b. The Screening Officer shall determine the completeness of the documents.

- If the documents are complete, pay the required fees. - If not complete, the documents will be returned to the applicant.

c. EMB Records Section of the Central Office receives the complete documents and forwards to the EQD-Hazardous Wastes Management Section (HWMS).

d. EQD-Hazardous Waste Management Section (HWMS) evaluates/processes the application and the submitted documents; conducts site inspection (if necessary) and prepares evaluation report and indorse the report to the Chief Environmental Quality Division (EQD)

e. The EQD Chief reviews and recommends approval/denial of the application f. EMB Director approves/denies application

12

Form : Registration form for HW Transporter Section C1. General Information of Transporter

1. DENR ID: 2. Date of issued (D/M/Y): / / 3. Registered Company Name: 4. Address: 5. Date of Establishment: 6. Tel: 7. Fax: 8. Name of contact person: 9. Tel: 10. Fax: 11. e-mail: 12. General Description of Business/Operation

13. Authorized Capitalization (P/year): 14. Paid-up Capitalization (P/year): 15. Total Employees: 16. Admin. Employees: 17. Number of Drivers Please append the following:

? (1) Official Letter of Request (Pro-forma) ? (2) Duly accomplished Registration Form C for Hazardous Waste Transporter ? (3) Business Permit/SEC Registration Certificate ? (4) Description/Specification of Conveyance. Details of Transport Service ? (5) Photographs of conveyance (inside and outside shots of vehicle) ? (6) Sketch/Provision of a garage ? (7) Proof of ownership of vehicle (Certificate of Registration and Contract of Lease and/or Deed of Sale, if applicable) ? (8) Certification from the Bureau of Fire Protection, in case of tank lorry ? (9) Contingency/Emergency Preparedness Plan and Certificate of Training from EMB ? (10) Accountability Statement (duly notarized) ? (11) Vehicle certificate of road worthiness from LTO

I certify that enclosed information is a true and accurate record as available. Contact Person: Signature: Date(D/M/Y) / / Registration Fees O.R. No. Date

13

II. Registration of Hazardous Waste Treatment, Storage and

Disposal (TSD) Facility.

Requirements:

a. Duly accomplished Application for Registration b. Copy of Environmental Compliance Certificate (ECC); c. Copy of Permit to Operate for Water Pollution Control Facilities and/or for Air

Pollution Source/Control Device d. Copy of Environmental Impact Statement (EIS) or Initial environmental

Examination (IEE) e. Emergency/Contingency Plans including Abandonment Plan f. Process flow and detailed description of each treatment/recycling/disposal

process technologies including overall material balance identifying all/by-products, and end-products and residues

g. Pollution Control Officer accreditation certificate h. Storage Management Plan for raw materials, residues, by products and end-

products i. Long-term plan for the recycled/processed/end-product j. Photographs of the facilities showing processing areas, storage areas k. Accountability statement, duly notarized

14

PROCEDURAL FLOW

Registration for Hazardous Wastes Treatment, Storage and Disposal Facility

Not complete

Complete

1 day

1 day

Additional Requirements


2 days

Comments/Inquiries/Revision 5 days

APPLICANT

Hazardous Waste TSD Facility Application Form : 1. Accomplish form for registration 2. Environmental Compliance Certificate 3. Permit to Operate (PO) Wastewater Treatment Facility (WTF) and

Air Pollution Control Device (APCD) (if applicable) Issued by the EMB Regional Office

4. Copy of Environmental Impact Statement or Initial Environmental Examination and

5. Emergency/Contingency Plans including Abandonment Plan Process flow for all treatment/recycling/disposal technologies including overall material balance

EMB RECORDS SECTION

ENVIRONMENTAL QUALITY DIVISION

HAZARDOUS WASTES MANAGEMENT SECTION


OFFICE OF THE DIRECTOR

HW DENR ID NO. ---------------------------------------------------------------

15

Steps:

a. The treater submits duly accomplished Registration Form together with the

complete requirements; b. The Screening Officer shall determine the completeness of the documents.

- If the documents are complete, pay the required fees - If not complete, the documents will be returned to the applicant.

c. The Record Section receives application and the requirements and forwards to the EQD-HWMS

d. EQD-Hazardous Waste Management Section (HWMS) processes/evaluates application; conducts site inspection and prepares report and forwards to Chief, Environmental Quality Division (EQD);

e. The Chief EQD reviews and recommends approval of registration with the corresponding TSD Facility DENR ID Number

f. EMB Director approves/disapproves.

16

Form : Registration form for HW Treater B1: General Information of Treater

1. DENR ID: 2. Date of issued (D/M/Y): / / 3.Registered Company Name: 4. Address of head office: 5. Name of the President 6. Tel: 7. Fax: 8. Address of the Plant: 9. Tel: 10. Fax: 11. Pollution Control Officer: 12. Tel:

13. Fax: 14. e-mail:

15. Date of Establishment (D/M/Y): / / 16: Authorized Capitalization (P/year): 17: Paid-up Capitalization (P/year):

18. Total Employees: 19. Admin. Employees: 20. Plant Employees: 21. Treatment method and Capacity:

A: Physico-Chemical treatment B: Thermal treatment C: Solidification D: Storage

E: Disposal F: Recycle

Treatment Method

Date of permit to Operate

Treatment Capacity (ton/day)

Type of HW can be treated

/ / / / / / / / / /

Please append the following for each TSD premises: ? (1) Copy of Environmental Compliance Certificate (ECC) ? (2) Copy of Valid Permit to Operate pollution control facilities ? (3) Initial Environmental Examination (IEE) or Environmental Impact Statement (EIS)

submitted to the EMB Regional offices ? (4) Process flow Diagram and detailed description of each treatment/recycling process

identifying all/by-products, end-products and residues ? (5) Pollution control officer accreditation certificate ? (6) Storage management plan for raw materials, residues, by-products and end-products ? (7) Long term plan for the recycled/processed/end-product ? (8) Photograph/s of the facilities showing processing areas, storage areas ? (9) Accountability statement (Duly notarized)

I certify that enclosed information is a true and accurate record as available. President: Signature: Date(D/M/Y) / / Registration Fees O.R. No. Date

17

III. Registration for Importation of Recyclable Materials

Containing Hazardous Substances

Requirements:

a. Official Letter of Request; b. Duly accomplished Importer Registry Sheet c. Copy of Environmental compliance Certificate (ECC); d. Copy of Permits to Operate

- Air Pollution Source/Control Facility - Wastewater Treatment Facilities

18

PROCEDURAL FLOW

Registration for Importation of Recyclable Materials

Applicant

Importer Registry Sheet Application • Importer Information • Waste Generator/Shipper Information • Recycling Facility Information

• Attach all Environmental Permits of Recycling Facility • Recyclable Material Information • Transportation Information • Physical Characteristics of Recyclable Material • Importer Certification

EMB RECORDS SECTION

Environmental Management Bureau HAZARDOUS WASTE MANAGEMENT SECTION



Importer’s Registry

Certificate

Not

Complete

1 day


15 days – Evaluation

2 days

5 days

Comments/Inquiries/Revisio

19

Steps:

a. The Importer submits Official Letter of Request and duly accomplished Importer Registry Sheet

b. The Screening Officer shall determine the completeness of the documents.

- If the documents are complete, pay the required fees. - If not complete, the documents will be returned to the applicant. -

c. The Record Section receives the application and the complete requirements and forwards to the EQD-HWMS.

d. EQD/HWMS evaluates application and conducts inspection of Recycling Facility;

prepares report and recommendations for the approval of Registry Certificate to the Chief Environmental Quality Division (EQD)

e. The EQD, Chief reviews and recommends the approval to the Director f. EMB Director approves/disapproves the Registration

20

Department of Environment and Natural Resources Form No. ____________ Environmental Management Bureau Sheet No. ____________ IMPORTER REGISTRY SHEET (to be filled out in triplicate) Please read instruction before filling up this application. A. IMPORTER INFORMATION

Name of Importer____________________________________________________ Address_____________________________________________________________ Contact Person_______________________________________________________ Telephone No. _______________________ Fax No.:_________________________ Reason for Import: __________________________________________________________________________________________________________________________________________________________________________________________________________________

B. WASTE GENERATOR/SHIPPER INFORMATION

Generator/Shipper Name:______________________________________________ Facility Address (site of recyclable material generation):______________________ Generator Company Name: CITY, STATE/PROVINCE, COUNTRY ______________ Technical Contact: __________________________________________________ Phone No.: __________________________________ Fax No.:________________

C. RECYCLING FACILITY INFORMATION

Name of Company:___________________________________________________ Address:____________________________________________________________ Telephone No.:_______________________________ Fax No.:________________ Contact Person:______________________________________________________ Method of Processing:_________________________________________________ Description Process: ____________________________________________________________________________________________________________________________________________

? Methods for handling, including collection, packaging, labelling, transportation, and route which must conform with internationally accepted standards; ________________________________________________________________________________________________________________________________

? Listing of personnel who will be responsible for supervising the collection,

transport and unpacking of the recyclable materials and their respective qualifications; and ________________________________________________________________________________________________________________________________

? Emergency response plan describing steps to be taken by parties concerned in

case of spill/accident which may occur during transport from the premises of the recyclable material generator to the importer. ________________________________________________________________________________________________________________________________

(Please use separate sheet if necessary)

Attach all Environmental Permits of Recycling Facility D. RECYCLABLE MATERIAL INFORMATION (See instructions)

Recyclable Materials/s Name ___________________________________________ Original Form of the Recyclable Material:__________________________________ Amount/Units to be imported for the whole year:_____________________________ Frequency of the importation: Weekly Quarterly Other, specify Monthly Semi-Annually

E. TRANSPORTATION INFORMATION

Type of Packaging : Bulk Liquid Bulk Sludge Bulk Solid Drum/Box Tanked Others, Specify Mode of Shipment Air Sea This form is to be completed per recyclable material to be registered. Instructions for completing this form are attached

21

F. PHYSICAL CHARACTERISTIC OF RECYCLABLE MATERIAL (See Instructions) Color

2. Does the recyclable materials have a strong incidental odor? No Yes, if so Describe:____________

3.Physical State@ 700F/21OC: __ Solid __Semi Solid __Liquid __ Powder other:________________

4. Layers __Multi layered __Bi-Layered __Single Phased

5. Density Range : ___________

6. Free Liquids ___Yes ____ No Volume:_________%

pH <2

<2-4 4-7

7 7-10

10 <12.5

12.5 Range

NA

Flash Point None < 1400 /600 140 1990F/60-930C >2000F/930C Closed Cup Open Cup

CHEMICAL COMPOSITION RANGE 2. Does the waste contain any of the following(MIN-MAX) (MIN-MAX) (provide concentration if known): ____________________ ________% NO or LESS THAN or ACTUAL _____________________ ________% PCBs 50 ppm____ _____

_____________________ ________% Cyanides 50 ppm____ _____

_____________________ ________% Sulfides 50 ppm____ _____

_____________________ ________% Phenols 50 ppm____ _____ * If applicable, a certified laboratory analysis from the country of origin should be attached

IMPORTER CERTIFICATION By signing this profile sheet, the importer verifies:

1. This recyclable material is not “Hazardous Waste” as defined by GOPs RA6969 and/or international regulations.

2. This recyclable material does not contain regulated radioactive materials or PCBs (Polychlorinated Biphenyls).

3. The recyclable material does not contain regulated concentration of banned and controlled pesticides.

4. This recyclable material does not contain halogenated compounds such as: tetrachloroethylene, trichloroethane, methylethylene chloride, 1,1,1-trichloroethane, trichlorofluoromethane 1, 1 dichloroethylene, and 1, 2-dicloroethylene at greater than 0.1% (1,000 ppm) total solvent concentration.

5. This sheet and the attachments contain true and accurate descriptions of the recyclable materials. All relevant information regarding known or suspected hazards in the possession of the Generator have been disclosed.

6. The Importer has read and understand the form. All types and amounts of hazardous substances provided in incidental amounts have been identified in Section G of this form.

7. The analytical data presented herein or attached hereto were derived from testing a representative sample taken in accordance with RA6969, if required, or equivalent rules.

8. If any changes occur in the character of the recyclable material, the Importer shall notify the Environmental Management Bureau prior to the shipping of the recyclable material to the consignee/recycler.

9. Signature:_____________________________________________________ 10. Title:_________________________________________________________ 11. Name (type or Print) ____________________________________________ 12. Date_________________________________________________________

Do not write below this line -------------------------------------------------------------------------------------------------------------------------- ENVIRONMENTAL MANAGEMENT BUREAU Date: Accept Reject

AUTHORIZED NAME: (Print or Type)

REGISTRY REFERENCE CODE

AUTHORIZED SIGNATURE:

Place EMB seal here

TITLE

22

IV. Clearance for Importation of Recyclable Materials Containing

Hazardous Substances

Requirements:

b. Official Letter of Request; c. Duly accomplished Importation Clearance for Recyclable Materials Form ; d. Copy of "Permits to Operate"

- Air Pollution Source/Control Facility (latest renewal) - Wastewater Treatment Facilities

e. Notification from the Country of Export; f. Copy of Insurance Coverage for the shipment; g. Purchase Order; h. Last Bill of Lading; i. Affidavit of Joint Undertaking of Exporter/Importer specifying the following:

- liabilities for clean up operations in case of spill and emergencies - responsibility of the exporter to retrieve/return the waste when denied entry

by the Government of the Philippines - liabilities of parties to compensate for damage to properties and life in case of

emergencies and accidents;

23

PROCEDURAL FLOWCHART

Application for Import Clearance

ImportClearance

EMB RECORD SECTION




1 day

1 day

10 days Evaluation

2 days

5 days

COUNTRY OF EXPORT


APPLICANT

Importation Clearance Requirements:- General Information of Importer- Official Letter of Request- Accomplished Application Form- Environmental Compliance Certificate (ECC)- Permits to Operate- Notification/Consent of Exporting Country- Registered/Accredited Recycler- Insurance (Shipment)- Purchase Order- Last Bill of Lading- Affidavit of Joint Undertaking of Exporter/Importer

NOTIFICATION


24

Steps:

a. The Importer submits Official Letter of Request together with the complete requirements,

-if still not yet registered as importer, duly accomplished Hazardous Waste Registration Form and Importer Registry Sheet

-if already registered, at least sixty (60) days prior to importation, the applicant submits the Importation Clearance for Recyclable Materials Form and copy of the Basel Convention Notification form submitted by the competent authority of the exporting country. b. The Screening Officer shall determine the completeness of the documents.

-If the documents are complete, pay the required fees. -If not complete, the documents will be returned to the applicant.

c. Record Section receives the application for Importation Clearance and the complete requirements, forwards to the EQD-HWMS

d. EQD/HWMS evaluates application and conducts inspection of Recycling Facility; prepares report and recommendations for the approval of Importation Clearance and forwards to Chief, Environmental Quality Division (EQD)

e. The EQD Chief reviews and recommends the approval of Clearance to the Director

f. EMB Director approves/disapproves Importation Clearance

25

Department of Environment and Natural Resources Form No. ____________ Environmental Management Bureau Sheet No.____________ IMPORTATION CLEARANCE FOR RECYCLABLE MATERIALS to be filled out in triplicate A. IMPORTER INFORMATION :

1. Name of Importer ___________________ ___________________________ 2. Registry Reference Code_________________________________________ 3. Address _____________________________________________________ 4. Contact Person _______________________________________________ 5. Telephone No. __________________ Fax No. ________________________

B. WASTE GENERATOR/SHIPPER INFORMATION

1. Generator (Shipper Name) ________________________________________ 2. Facility Address _______________________________________________

C. RECYCLING FACILITY INFORMATION:

1. Name ________________________________________________________ 2. Address _____________________________________________________

D. RECYCLABLE MATERIAL INFORMATION :

1. Type of Material _______________________________________________ 2. Volume of Material Imported ______________________________________ 3. Type of Packaging_________________________________________________ 4. Intended Carriers _______________________________________________ 5. Mode of Shipment AIR SEA 6. Port of Entry __________________________________________________ 7. Expected Date of Arrival_________________________________________

E. ATTACHMENTS:

To be attached to this IC are the following affidavits of undertaking specifying the following: 1) Liabilities for clean up operations in case of spill and emergencies; 2) Responsibility of the exporter to retrieve/return the waste when denied entry by the

Government of the Philippines; 3) Copy of insurance coverage for the shipment; and 4) Liabilities of parties to compensate for damage to properties and life in case of

emergencies and accidents. F. Signature ______________________________ Title _____________________ Name (Type or Print)_________________________ Date_______________________________ --------Do not write below this line--------- (to be filled up by EMB) DISAPPROVED

APPROVED: Pursuant to DAO ____which hereby grants you clearance to import only the above cited material subject to the conditions stated hereunder: _____________________ _______________________________ Date Director, Environmental Management Bureau

Registration Fees O.R. No. Date

26

V. Export Clearance-Transmittal Notification for Hazardous Waste/Recyclable Materials

Requirements:

a. Official Letter of Request addressed to the EMB Director b. Duly accomplished Notification Form, copy shown below, if seeking

Transmittal Notification c. Notification/Consent of Importing Country and or Transit Country if

applicable d. Hazardous Waste Registration of the Generator(s)

? DENR ID Number ? Latest Quarterly Report

e. Insurance Certificate of Cover for the shipment f. Purchase Order/Contract g .Last Bill of Lading, for renewals h. Movement Document/Manifest Form for previous export (If applicable)

i. Affidavit of Joint Undertaking of Exporter/Importer specifying the following:

? liabilities for clean up operations in case of spill and emergencies ? responsibility of the exporter to retrieve/return the waste when

denied entry by the Country of Export ? liabilities of parties to compensate for damage to properties and life

in case of emergencies and accidents;

27

PROCEDURAL FLOWCHART

Application for Export Clearance - Transmittal of Notification

APPLICANT

EMB RECORDS SECTION

Complete

Not complete





Exporter’sNotification

1 day

10 days - Evaluation and Site Inspection/Inspection

2 days

5 days

1 day


Comments/Inquiries/Revision

Exportation Clearance & Permit to Transport Hazardous Wastes/Recyclable Materials1. General Information of the Exporter 9. Movement Document/2. Official Letter of Request Manifest of Previous Export3. Accomplished Notification Form 10. Affidavit of Joint Undertaking4. HW Generator’s DENR ID Number of Exporter and Importer5. HW Generator’s Latest Quarterly Report6. Insurance (Shipment)7. Purchase Order8. Last Bill of Lading, for renewals

Transit Country

Country of Destination

28

PROCEDURAL FLOWCHARTApplication for Export Clearance

TRANSIT COUNTRY

Export Clearance

EMB RECORD SECTION





1 day

1 day

10 days

2 days

5 days

COUNTRY OF DESTINATION

OFFICIAL CONSENT OFFICIAL CONSENT


29

Steps:

a. The Exporter submits official letter of request for Transmittal Notification to the

EMB Director with the complete requirements and payment of corresponding fee.

b. The competent authority of the country of import/transit countries sends consent to the transboundary movement of hazardous wastes.

c. The Screening Officer shall determine the completeness of the documents. - If the documents are complete, pay the required fees. - If not complete, the documents will be returned to the applicant.

d. EMB Records Section receives the complete documents from the exporter; forwards to the Environmental Quality Division-HWMS.

e. EQD/Hazardous Waste Management Section (HWMS) processes/evaluates request/application, conducts site inspection, prepares report and recommends issuance of Transmittal Notification Certificate and/or Export Clearance, whichever is applicable and forwards to Chief Environmental Quality Division (EQD)

f. The EQD Chief reviews and recommends the approval g. EMB Director approves/disapproves Exporters Notification and/or Export

Clearance.

30

TRANSBOUNDARY MOVEMENT OF WASTE - Notification

BASEL CONVENTION 1. Exporter (name, address): Contact person: Tel.: Fax/Telex: Reason for export :

Notification 3. Notification concerning (1) A (I) Single movement (I) Disposal (no recovery) (II) General notification (multiple movements (II) Recovery operation C. Pre-authorized for a recover facility (1) Yes No (To be completed for a recovery facility located in an OECD State)

2. Importer (name , address): Contact person: Tel.: Fax/Telex:

4. Total intended number 5. Estimated quantity (3) of shipments : ________________ kg ________________ liters 6. Intended date(s) or period for shipment(s):

7. Intended carrier(s) (name, address) (2): Contact person: Tel.: Fax/Telex:

8. Disposer (name, address(s): Contact person: Tel. Fax/Telex: Actual site of disposal : 9. Method(s) of disposal: D code/ R code (4) Technology employed: (Attach details if necessary)

10. Waste generator (name, address) (2): Contact person: Tel. Fax/Telex: Site generation & process:

11. Means of transport (4): 12. Packaging type(s) (4):

13. (1) Designation & chemical composition of the waste:

(ll) Special handling requirements

14. Physical characteristic (4):

17. Y number (4):

15 Waste identification code in country of export : IWIC : in country import : EWC : Customs code: Other (specify) :

18. N number (4):

16. OECD Classification (1): amber red acid number: other (attach details)

19. (I) UN identification No.: UN Shipping name:

(ll) UN class (4):

20. Concerned states, code number of competent authorities, and specific points of entry and exit: State of export States of transit State of import

21. Customs offices to entry and/or departure (European Community) Entry: Departure

23. Exporter’s/Generator’s declaration: I certify that the information is complete and correct to my best knowledge. I also certify that legally enforceable written contractual obligations have been entered into and that any applicable insurance or other financial guarantees are or shall be in force covering the transboundary movement. Name : Signature Date

FOR USE BY COMPETENT AUTHORITIES 24. To be completed by competent authority - Import (ECC,OECD) Notification received on: - transit (Basel) Acknowledgement sent on: Name of competent authority: Stamp and/or signature:

25. Consent to the movement provided by the competent authority of (country) Consent given on: Specific conditions (1) Yes, see block 26over leaf/annex no Name of competent authority: Stamp and/or signature:

(1) Enter X in appropriate box (2) Attach list if more than one (3) Attach detailed list if multiple shipment (4) See codes on the reverse

N

22. Number of annexes attached:

31

List of abbreviations used in the application

DISPOSAL (NO RECOVERY) (Block 9)

01 Deposit or unto land (e.g. landfill, etc.)

02 Land treatment (e.g. biodegradation of liquid or sludgy discards in soils, etc.)

03 Deep injection (e.g. injection of pumpable discards into wells, salt domes or naturally occurring

repositories, etc.)

04 Surface impoundment (e.g. placement of liquid or sludge discards into pits, ponds of lagoons, etc.)

05 Specially engineered landfill (e.g. placement into lined discrete cells which are capped and isolated from

one another and the environment, etc.

06 Release into a water body except seas/oceans

07 Release into seas/oceans including sea bed insertion

08 Biological treatment not specified elsewhere in this list which results in final compounds and mixtures which

are discarded by means of any of the operations numbered 01 to 012

09 Physico chemical treatment not specified elsewhere in this list which results in final compounds or mixtures

which are discarded by means of any of the operations numbered 01 to 012 (e.g. evaporation, drying,

calciration, etc.)

010 Incineration on land

011 Incineration at sea

012 Permanents storage (e.g. emplacement of containers in a mine, etc.)

013 Blending or mixing prior to submission to any of the operations numbered 01 to 012

014 Repackaging prior to a submission to any of the operations numbered 01 to 012

015 Storage pending any of the operations numbered 01 to 012

RECOVERY OPERATIONS (Block 9)

R1 Use as fuel (other than in direct incineration) or other

means to generate energy

R2 Solvent reclamation/regeneration

R3 Recycling/reclamation of organic substances which are

not used as solvents

R4 Recycling/reclamation of metals and metal compounds

R5 Recycling/reclamation of other inorganic materials

R6 Regeneration of acids or bases

R7 Recovery of components used for pollution abatement

R8 Recovery of components from catalysts

R9 Used oil refining or other reuses of previously used oil

R10 Land treatment resulting in benefit to agriculture or

ecological improvement

R11 Used of residual materials obtained from any of the

operations numbered R1 to R10

R12 Exchanges of wastes for submission to any of the

operations numbered R1 to R11

R13 Accumulation of material intended for any operation

numbered R1 to R12

MEANS OF TRANSPORT (Block 11)

R - Road

1 - Train/Rail

S - Sea

A - Air

W - Inland Waterways

PACKAGING TYPES

1. Drum

2. Wooden barrel

3. Jerrican

4. Box

5. Bag

6. Composite packaging

7. Pressure receptacle

8. Bulk

9. Other (specify)

PHYSICAL CHARACTERISTICS (Block 14)

1. Powdery / powder 5. Liquid

2. Solid 6. Gaseous

3. Viscous / paste 7. Other (specify)

4. Sludgy

11 NUMBER (Block 18) AND UN CLASS (Block 19)

UN Class II Number Designation

Y numbers (block 17) refer to categories of waste listed in Annex I and II of the Dasel Convention. These codes, as well as more detailed information can be found in an Instruction Manual available

from the Secretariat of the Dasel Convention.

26. SPECIFIC CONDITIONS OF CONSENTING TO THE MOVEMENT

Explosive

Inflammable liquids

Inflammable solids

Substances or wastes liable

to spontaneous combustion

Substances or wastes

which in contact with water

emit inflammable gasses

Oxidizing

Organic Peroxides

Poisonous (acute)

Infectious substances

Corrosives

Liberation of toxic gases in

contact with air or water

Toxic (delayed or chronic)

Ecoloric

Capable by means after

disposal, of yielding another

material e.g. leachate,

which possesses any of the

characteristics listed above

1 111

3 113

4 1 114 1

4 2 114 2

4 3 114 3

5 1 115 1

5 2 115 2

6 1 116 1

6 1 116 2

8 118

9 1110

9 1111

9 1112

9 1113

32

Movement Document Notification for waste shipment was issued: Date of issuance: __/__/__ Notification for a single shipment Notification for a multiple shipments for the period ______ This shipment is nb.________of total shipments included in the general notification: ________________ 1. EXPORTER (NOTIFIER) (1) Name: Telephone: Address : Telefax: Contact Person (name, address, telephone, telefax) : 2. GENERATOR(s) of WASTE Name: Telephone: Address : Telefax: Contact Person (name, address, telephone, telefax) : Process by which the waste was generated : Site of generation : 3. DISPOSER OF THE WASTE Name : Address : Telephone : Telefax:

TO BE COMPLETED BY THE DISPOSER

Contact Person in case of emergency (name,address,telephone,telefax):

Certification of receipt of waste at Designated disposal facility

Approximate date of Disposal :

Method of disposal (3) D code R code

Actual Site of Disposal : Date : __/__/__ Signature : Actual date of disposal : __/__/__ Signature of disposer:

33

4. WASTE Description of the waste : Y number H number UN class UN number UN Shipping name IWIC Code Physical state at 20o C powder solid paste/viscous sludge liquid Gaseous other _______ Estimated quantity per shipment : 1st 2nd 3rd 4th 5th (kg or L) Type of Packaging Number of packages Special handling requirements, including emergency provisions in case of accidents: 5. ITINERARY Country of export : Point of exit (when designated) Transit countries: 1) Point of entry (when designated ) : Point of exit (when designated) : 2) Point of entry (when designated ) : Point of exit (when designated) : 3) Point of entry (when designated ) : Point of exit (when designated) : 4) Point of entry (when designated ) : Point of exit (when designated) : Country of import: Point of entry (when designated) :

34

6. CARRIER OF THE WASTE or his agent 1. Name : Address : Telephone : Telefax : Contact Person (name, address, tels., telefax): Means of transportation: Sea air inland waters Road rail

Date of transboundary movement started: __/__/__ Signature of the carrier(s) or agent : License (when applicable) :

2. Name : Address : Telephone : Telefax : Contact Person (name, address, tels., telefax); Means of transportation: Sea air inland waters Road rail


3. Name : Address : Telephone : Telefax : Contact Person (name, address, tels., telefax); Means of transportation: sea air inland waters road rail


CONSENT OF THE COMPETENT LOCAL AUTHORITY

TO BE COMPLETED BY THE GENERATOR OR EXPORTER Declaration that the information is correct: Declaration indicating no objection from the competent authorities of all States concerned which are Parties to the BC: Date of consent of Exporting State : __/__/__ Date of consent of Importing State : __/__/__ Date of consent of Transit State : __/__/__

35

Annex to the Notification and Movement Document 1. The Notifier is:

- the person who wants to import hazardous waste within ______; or - the person who wants to export hazardous waste within ______; or - the person who wants to transit hazardous waste through _____.

2. “Designation of the waste” means a designation of the nature and the concentration

of the most hazardous components in terms of toxicity and other dangers presented by the waste both in handling and in relation to the proposed disposal method

3. As per Annex IV of the Basel Convention : D or R code 4. This must include the point of entry and the point of exit of the waste, inside or

outside the country. 5. In the case of a general notification covering several shipments, the expected dates of

each shipment have to be specified. If this is not known, the expected frequency of the shipments.

…………………………………..

permitting procedures hazardous

Documents

environmental

initial environmental

process flow

environmental

emb regional

pollution

hazardous

emb records