perma-cast swimming pool products - ul specifications bronze … · 2019. 6. 10. · perma-cast...

1
UL Specifications Bronze Perma-Socket Bonding Lug REVISION 07/2013 Perma-Cast Co. Pueblo, CO www.permacastonline.com Call 719-544-9544 Bronze Perma-Socket Bonding Lug Meets UL Specifications Perma-Cast Bronze Sockets conforms to UL Specifications for grounding and Bonding Equipment UL 467 and UL 486A (Wire Connectors and Soldering lugs for Use with Copper Conductors). Lab Test were conducted by Underwriters Laboratories, Santa Clara, California. The test program included test for secureness, pull out, and Bonding Milli-Volt Drop Test Results Secureness Test: As specifies in UL 486B, Sec. 11. Test results:No Conductors seperated from the terminals. All samples passed. Pullout Test: As specified in UL 486A, Section 13. Test results: No Conductors seperated from the terminals. All samples passed. Milli-Volt Drop Test: As Specified in UL 676 Section 34. Test results: maximum allowable resistance, 0.1Ohm. Test range .0003 Ohms to .0013 Ohms. All samples Passed.

Upload: others

Post on 31-Aug-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Perma-Cast Swimming Pool Products - UL Specifications Bronze … · 2019. 6. 10. · Perma-Cast Bronze Sockets conforms to UL Specifications for grounding and Bonding Equipment UL

UL SpecificationsBronze Perma-Socket

Bonding Lug

REVISION 07/2013

Perma-Cast Co. Pueblo, CO www.permacastonline.com

Call 719-544-9544

Bronze Perma-Socket Bonding LugMeets UL Specifications

Perma-Cast Bronze Sockets conforms to UL Specifications for grounding and Bonding Equipment UL 467 and UL 486A (Wire Connectors and Soldering lugs for Use with Copper Conductors).

Lab Test were conducted by Underwriters Laboratories, Santa Clara, California. The test program included test for secureness, pull out, and Bonding Milli-Volt Drop

Test ResultsSecureness Test: As specifies in UL 486B, Sec. 11. Test results:No Conductors seperated from the terminals. All samples passed.

Pullout Test: As specified in UL 486A, Section 13. Test results: No Conductors seperated from the terminals. All samples passed.

Milli-Volt Drop Test: As Specified in UL 676 Section 34. Test results: maximum allowable resistance, 0.1Ohm. Test range .0003 Ohms to .0013 Ohms. All samples Passed.