peri clean concrete release agent - basta onlinevpp.bastaonline.se/documents/474530/sdb/peri clean...
TRANSCRIPT
Edition 06 | 2015
PERIFormwork Scaffolding EngineeringRudolf-Diesel-Strasse 19
89264 Weissenhorn
Germany
Tel. +49 (0)7309.950-0
Fax +49 (0)7309.951-0
www.peri.com
Important Notes:
Without exception, all current safety regulati-ons and guidelines must be observed in those countries where our products are used.
The systems or items shown might not be available in every country.
The information contained herein is subject to technical changes in the interests of progress. Errors and typographical mistakes reserved.
1
PERI CleanProduct information
Product description:PERI Clean is a semi-synthetic, non-water miscible universal release agent.
Solvent-free. No discolouring of the concrete surface. Economical to use,
therefore it is particularly cost-effective. PERI Clean is 57 % biodegradable within
28 days in accordance with OECD Guideline 301 F. Free of waxes and silicones.
PERI Clean is suitable for Minergie-Eco (CH). Can be used for standard formwork
and construction site equipment.
Typical characteristic values:Appearance clear
Colour brighter 4.0 DIN ISO 2049
Viscosity/0 °C mm²/s 45 DIN 51 562
Viscosity/20 °C mm²/s 18 DIN 51 562
Viscosity/40 °C mm²/s 9,2 DIN 51 562
Viscosity index 94 DIN ISO 2909
Density/15 °C kg/m³ 860 DIN 51 757
Flashpoint (according to Cleveland) °C > 120 DIN EN ISO 2592
Pour point °C < -10 DIN ISO 3016
Water contamination WGK 1
GISCODE BTM 10
Applications:– For non or less absorbent formlining (formwork panels coated with phenolic
resin) as well as all-plastic and plastic-coated formlining.
– prevents rusting of construction equipment and machinery such as concrete
mixers and charging buckets.
– ensures prop and spindle threads run smoothly.
Application:– Working temperature -15 °C up to +80 °C.
– The most important and and generally applicable rule:
spread thinly and evenly. Reference value of the application quantity 20 g / m² (depending on the type
of formlining).
Used in excess, this can lead to spotting, powdering and sanding of the
concrete surface.
– Apply using PERI high-pressure sprayer and wide-angled nozzle. Always work
with high pressure (> 3 bar) in order to ensure even distribution of the release
agent. Applying the agent with a brush or simialar means is not to be recom-
mended as the application process will be very uneven.
– Before being used for the first time, spray the sides of the panels when
stacked.
BTM-Code:10
2
– Spray the rear side of the formwork after being installed for the initial use and
repeat approx. every 4 weeks.
– Spray immediately after striking as PERI Clean prevents the adhesion of freshly
placed concrete to the forming surface and thereby reduces cleaning require-
ments.
– If used correctly, any subsequent processing of the concrete surfaces through
plastering, wallpaper, paint and ceramic is not adversely affected
– In principle, samples are to be taken for all first-time usage.
Delivery form:PERI Clean is supplied ready-to-use in 20 l plastic canisters or 208 l metal drums.
Storage, transport and identification:– Storage period: 36 months at 0 °C up to 40 °C. Possible thickening at temperatu-
res below 0° C are reversible.
– It is not a hazardous material as defined in the transport regulations for agricul-
ture (ADR), maritime (IMDG) and air transport ICAO)
Safety instructions and first-aid measures:See PERI Clean safety data sheet.
Additional important information is available in the safety data sheet in accordance
with 91/155/EEC.
PERI CleanProduct information
3
PERI CleanProduct information
Item no. Weight kg
031420031435
0,860,86
PERI CleanPERI Clean, 20 LPERI Clean, 208 LConcrete release agent on a semi-syn-thetic basis. Can be used for standard formwork and construction site equip-ment. Water Contamination Class 1
NoteConsider PERI Clean safety data sheet!
104890 4,700 Release Agent Pressure SprayerFor spraying formwork surfaces evenly with PERI Bio Clean, PERI Clean or PERI Plasto Clean.
Complete with1 x 117019 Flat Spray Nozzle1 x 117017 Spiral Hose 2.5 m1 x 117015 Shut-Off Valve1 x 031526 Sealing Kit1 x 117016 Air Pump
PERI GmbHFormwork Scaffolding EngineeringRudolf-Diesel-Strasse 19
89264 Weissenhorn
Germany
Tel. +49 (0)7309.950-0
Fax +49 (0)7309.951-0
www.peri.com
System-Independent Accessories
Wall Formwork Column Formwork
Slab Formwork Climbing Systems Tunnel Formwork Bridge Formwork
Shoring Systems Facade ScaffoldConstruction Scaffold Industrial Scaffold
Access Protection Scaffold Services
The optimal System for every Project and every Requirement
DE
en
0
7 | 2
015
5
ma
79
05
88
©
PE
RI
Gm
bH