perform toolkit 3 1 release notes 1.0 onlinepdf
TRANSCRIPT
-
8/10/2019 PERFORM Toolkit 3 1 Release Notes 1.0 OnlinePDF
1/18
PERFORM Toolkit 3.1 ReleaseNotes
Reference: InTouch ID#
Version: 1.0
Release Date: 28-Mar-2014
EDMS UID: 1652317494
Produced: 28-Mar-2014 08:46:15
Owner: BGC Documentation
Author: Dong Yuan, Mohammad Khairi
Hamzah, Francesca Kovacic
Private Release Notes, PERFORM Toolkit, PTK
Copyright 2014 Schlumberger, Unpublished Work. All rights reserved.
-
8/10/2019 PERFORM Toolkit 3 1 Release Notes 1.0 OnlinePDF
2/18
/ Legal Information
Legal Information
Copyright 2014 Schlumberger, Unpublished Work. All rights reserved.
This work contains the confidential and proprietary trade secrets of Schlumbergerand may not be copied or stored in an information retrieval system, transferred,
used, distributed, translated or retransmitted in any form or by any means,
electronic or mechanical, in whole or in part, without the express written
permission of the copyright owner.
Trademarks & Service marks
Schlumberger, the Schlumberger logotype, and other words or symbols used
to identify the products and services described herein are either trademarks,
trade names or service marks of Schlumberger and its licensors, or are the
property of their respective owners. These marks may not be copied, imitatedor used, in whole or in part, without the express prior written permission of
Schlumberger. In addition, covers, page headers, custom graphics, icons, and
other design elements may be service marks, trademarks, and/or trade dress
of Schlumberger, and may not be copied, imitated, or used, in whole or in part,
without the express prior written permission of Schlumberger.
A complete list of Schlumberger marks may be viewed at the Schlumberger
Oilfield Services Marks page: http://markslist.slb.com
Private
Copyright 2014 Schlumberger, Unpublished Work. All rights reserved.BGC
Documentation\DongYuan,
MohammadKhairiHamzah
,FrancescaKovaci
c\InTouchID#\1
.0\ReleaseDate:28-M
ar-2014\EDMSUID:1652317494\Produced
:28-M
ar-201408:46:15
http://markslist.slb.com/http://markslist.slb.com/ -
8/10/2019 PERFORM Toolkit 3 1 Release Notes 1.0 OnlinePDF
3/18
/ Document Control
Document Control
Owner: BGC Documentation
Author: Dong Yuan, Mohammad Khairi Hamzah, Francesca Kovacic
Reviewer: Dong Yuan
Approver: Dario Molteni
Contact Information
Name: BGC Documentation
Address: Schlumberger Technologies (Beijing) Ltd.
Schlumberger Beijing GeoScience Center
9th Floor, ChuangXin Building
Tsinghua Science Park
Beijing 100084, CHINA
Phone: +86 10 6061 5800
Email: [email protected] Alias: bgc-documentation
Revision History
Version Date Description Prepared by
1.0 28-Mar- 2014 First version for PTK 3.1 commercial release. Author: Mohammad Khairi
Hamzah, Francesca Kovacic
Reviewer:Dong Yuan
Private
Copyright 2014 Schlumberger, Unpublished Work. All rights reserved.BGC
Documentation\DongYuan,
MohammadKhairiHamzah
,FrancescaKovaci
c\InTouchID#\1
.0\ReleaseDate:28-M
ar-2014\EDMSUID:1652317494\Produced
:28-M
ar-201408:46:15
-
8/10/2019 PERFORM Toolkit 3 1 Release Notes 1.0 OnlinePDF
4/18
iv / Table of Contents iv
Table of Contents
1 Introduction ______________________________________________________ 1
1.1 Disclaimer of Warranty _________________________________________ 1
1.2 Purpose _______________________________________________________ 1
1.3 Scope _________________________________________________________ 1
1.4 Definitions, Acronyms, and Abbreviations ________________________ 2
1.5 References ____________________________________________________ 2
1.6 Overview ______________________________________________________ 2
2 About This Release ______________________________________________ 3
3 Software License _________________________________________________ 4
4 Compatible Products _____________________________________________ 5
5 Upgrades ________________________________________________________ 6
6 New Features ____________________________________________________ 7
7 Known Issues ____________________________________________________ 8
7.1 Outstanding SMRs _____________________________________________ 8
7.2 Known Issues _________________________________________________ 8
7.2.1 General ____________________________________________________ 8
7.2.2 Gang Time/Depth Plot ______________________________________ 8
7.2.3 Synchronized Log __________________________________________ 9
7.2.4 Hydraulics _________________________________________________ 9
7.2.5 Rig State __________________________________________________ 9
7.2.6 Wellbore Geometry _________________________________________ 9
7.2.7 Plotting Plan Survey and Actual Survey on a Depth Cross Plot 9
7.2.8 DMM Wellbore Curvature Estimate (Bending) Computation ___ 9
7.2.9 Partial Underreamer/Hole opener support ___________________ 10
7.2.10 Sidetrack Wizard sequencing logic _________________________ 10
7.2.11 Hydraulic Computation Performance ________________________ 10
7.2.12 Actual Survey Update ______________________________________ 107.2.13 Annotations _______________________________________________ 11
7.2.14 Importing/Exporting Issues DOX Related __________________ 11
7.2.15 Log Printing _______________________________________________ 11
7.2.16 Non-English Local Setting __________________________________ 11
7.2.17 Problem with Running PTK Software Without Administrator
Privilege __________________________________________________ 12
7.2.18 Project Size _______________________________________________ 12
Private
Copyright 2014 Schlumberger, Unpublished Work. All rights reserved.B
GC
Documentation\DongYuan,
MohammadKhairiHamzah
,FrancescaKovacic\InTouchID#\1
.0\ReleaseDate:28-M
ar-20
14\EDMSUID:1652317494\Produced:2
8-M
ar-201408:46:15
-
8/10/2019 PERFORM Toolkit 3 1 Release Notes 1.0 OnlinePDF
5/18
v / Table of Contents v
7.2.19 Project Storage ___________________________________________ 12
7.2.20 PTK Data Source __________________________________________ 12
7.2.21 Channel Names and Mapping ______________________________ 12
7.2.22 Tool Decoder Requires Specific Patch Version of
MSVSR80.dll ______________________________________________ 13
7.2.23 Source of Out-of-Memory Issue on the Time vs. Depth Plot __ 137.2.24 Non-supported Features ___________________________________ 13
Private
Copyright 2014 Schlumberger, Unpublished Work. All rights reserved.B
GC
Documentation\DongYuan,
MohammadKhairiHamzah
,FrancescaKovacic\InTouchID#\1
.0\ReleaseDate:28-M
ar-20
14\EDMSUID:1652317494\Produced:2
8-M
ar-201408:46:15
-
8/10/2019 PERFORM Toolkit 3 1 Release Notes 1.0 OnlinePDF
6/18
1 / Introduction 1
1 IntroductionRelease Notes,PERFORM Toolkit, PTK
1.1 Disclaimer of Warranty
Schlumberger makes no representations or warranties, either expressed or
implied, by or with respect to anything in this document, and shall not be liable
for any implied warranties of merchantability orfitness for a particular purpose or
for any indirect, special or consequential damages.
Copyright 2010, Schlumberger.
All rights reserved.
GOVERNMENT RIGHTS LEGEND: Use, duplication or disclosure by the U.S.
Government is subject to restrictions set forth in the applicable Schlumberger
license agreement and as provided in DFARS 227.7202-1(a) and 227.7202-3(a)
(1995), DFARS 252.227-7013(c)(1)(ii) (Oct 1988), FAR 12.212(a) (1995), FAR
52.227-19, or FAR 52.227-14, as applicable.
"Schlumberger" and Schlumbergers products are trademarks of Schlumberger.
References to other companies and their products use trademarks owned by the
respective companies and are for reference purpose only.
1.2 Purpose
The purpose of the Release Notes document is to communicate major new
features and enhancements in this release of PERFORM Toolkit 3.1. It also
documents known issues and workarounds. This document is for internal
commercialization purpose only. Each segment should prepare its own external
version of release notes.
1.3 ScopePERFORM Toolkit is an application to allow drilling engineers, drilling
optimization specialists and OSC engineers to perform pre-job analysis, real-time
execution optimization and post-job evaluation. Using these applications, drilling
data can be analyzed in real time or post job for better operation efficiency and
better service quality.
Private
Copyright 2014 Schlumberger, Unpublished Work. All rights reserved.BGC
Documentation\DongYuan,
MohammadKhairiHamzah
,FrancescaKovacic\InTouchID#\1
.0\ReleaseDate:28-M
ar-2014\EDMSUID:1652317494\Produced
:28-M
ar-201408:46:15
-
8/10/2019 PERFORM Toolkit 3 1 Release Notes 1.0 OnlinePDF
7/18
2 / Introduction 2
1.4 Definitions, Acronyms, and Abbreviations
DF Defined Function
DLS Dog Leg Severity
DMM Drilling Mechanics Module
OSC Operation Supporting Center
PTK PERFORM Toolkit
ROPO ROP Optimization Computation Module
RTDS Real-time Drilling Services
SMR Software Modification Request
WDP Wired Drill Pipe
1.5 References
N/A
1.6 OverviewThis document has a brief introduction to the application features in PTK
3.1. It explains the licensing mechanism and the target application users. A
section on product compatibility covers the applications being verified against
PTK 3.1 during product development and testing. The specific new features
and enhancements of PTK 3.1 are identified. Known issues are listed and
workarounds are described if they are available.
Private
Copyright 2014 Schlumberger, Unpublished Work. All rights reserved.BGC
Documentation\DongYuan,
MohammadKhairiHamzah
,FrancescaKovaci
c\InTouchID#\1
.0\ReleaseDate:28-M
ar-2014\EDMSUID:1652317494\Produced
:28-M
ar-201408:46:15
-
8/10/2019 PERFORM Toolkit 3 1 Release Notes 1.0 OnlinePDF
8/18
3 / About This Release 3
2 About This ReleaseRelease Notes,PERFORM Toolkit, PTK
This release covers PERFORM Toolkit for D&M/IPM. As an internal product, PTK
is licensed through LDAP or dongle based license to Schlumberger employees
including Smith/MI/GeoServices/Extreme Engineering. For details about how to
obtain a license, see Chapter3: Software License.
PTK 3.1 is the commercial release after 3.0. The major objective of this release
is to present the new features and workflows available (listed in Chapter6: New
Features).
Private
Copyright 2014 Schlumberger, Unpublished Work. All rights reserved.BGC
Documentation\DongYuan,
MohammadKhairiHamzah
,FrancescaKovacic\InTouchID#\1
.0\ReleaseDate:28-M
ar-2014\EDMSUID:1652317494\Produced
:28-M
ar-201408:46:15
-
8/10/2019 PERFORM Toolkit 3 1 Release Notes 1.0 OnlinePDF
9/18
4 / Software License 4
3 Software LicenseRelease Notes,PERFORM Toolkit, PTK
You must have access to a license file on a server, have a local license and
dongle or use an LDAP record to be able to run PERFORM Toolkit. The software
is licensed in three ways:
Active Directory Licensing, for Schlumberger internal users who will access
the application from company-issued computers using an LDAP record,
either their own or one from a Role Account LDAP record.
Schlumberger Server Based Dongle Licensing, for Schlumberger internal
users working on shared computers or workstations, such as in an OSC and
where a server-based dongle license is installed and available.
Schlumberger Individual Dongle Licensing, for internal users withnon-standard computers or who cannot connect directly to the Schlumberger
network such as from a clients office.
Please refer to the Installing and Setting Up License chapter in PTK 3.1
Installation Guide for further information.
Private
Copyright 2014 Schlumberger, Unpublished Work. All rights reserved.BGC
Documentation\DongYuan,
MohammadKhairiHamzah
,FrancescaKovaci
c\InTouchID#\1
.0\ReleaseDate:28-M
ar-2014\EDMSUID:1652317494\Produced
:28-M
ar-201408:46:15
-
8/10/2019 PERFORM Toolkit 3 1 Release Notes 1.0 OnlinePDF
10/18
5 / Compatible Products 5
4 Compatible ProductsRelease Notes,PERFORM Toolkit, PTK
This product has been tested with DOX 2.7 update and DOX 2.8.
PTK does not support the following BHA components to be used in Hydraulics
and Torque and Drag computation:
Turbine (only supported in BHA Builder)
Aluminum Drill Pipe
Private
Copyright 2014 Schlumberger, Unpublished Work. All rights reserved.BGC
Documentation\DongYuan,
MohammadKhairiHamzah
,FrancescaKovacic\InTouchID#\1
.0\ReleaseDate:28-M
ar-2014\EDMSUID:1652317494\Produced
:28-M
ar-201408:46:15
-
8/10/2019 PERFORM Toolkit 3 1 Release Notes 1.0 OnlinePDF
11/18
6 / Upgrades 6
5 UpgradesRelease Notes,PERFORM Toolkit, PTK
PTK 3.1 can coexist with the previously released PTK 2.1 and 3.0.
Private
Copyright 2014 Schlumberger, Unpublished Work. All rights reserved.BGC
Documentation\DongYuan,
MohammadKhairiHamzah
,FrancescaKovaci
c\InTouchID#\1
.0\ReleaseDate:28-M
ar-2014\EDMSUID:1652317494\Produced
:28-M
ar-201408:46:15
-
8/10/2019 PERFORM Toolkit 3 1 Release Notes 1.0 OnlinePDF
12/18
7 / New Features 7
6 New FeaturesRelease Notes,PERFORM Toolkit, PTK
The following new features are part of PTK 3.1:
SPIN workflow which enables you to monitor the stuck pipe tendencies. The
software computes the actual friction factor of the borehole and allows you to
monitor the changes throughout the drilling operations.
Three features are provided to aid stuck pipe monitoring:
SPIN Plots
SPIN Alarm Panel
SPIN Advanced Numeric Gauge
Three new Defined Functions to be used mainly with DMM downhole
measurements as inputs
DMM Tool Curvature
Plugged Nozzle Detector
Underreamer weight and torque
DMM Wellbore Curvature Estimate workflow in the Torque and Drag
engine to derive an estimate of the borehole curvature from the real-time
DMM bending moment measurement
Support Proximity workflow which enables you to publish the work done inPTK such as computations and observations.
Private
Copyright 2014 Schlumberger, Unpublished Work. All rights reserved.BGC
Documentation\DongYuan,
MohammadKhairiHamzah
,FrancescaKovacic\InTouchID#\1
.0\ReleaseDate:28-M
ar-2014\EDMSUID:1652317494\Produced
:28-M
ar-201408:46:15
-
8/10/2019 PERFORM Toolkit 3 1 Release Notes 1.0 OnlinePDF
13/18
8 / Known Issues 8
7 Known IssuesRelease Notes,PERFORM Toolkit, PTK
7.1 Outstanding SMRs
PTK SMRs are recorded into SWIFT (http://swift.slb.com ). You can query the
outstanding SMRs to know the product development status.
Product Line: Drilling & Measurement
Product Name: PTK (2.1, 3.0, and 3.1)
7.2 Known Issues
7.2.1 General
Plots
After you reopen a project, the vertical depth plots might display on a horizontal
view.
Workaround: Right-click in the log window, and then click Change Index to
Verticalfor the vertical view.
7.2.2 Gang Time/Depth Plot
Once you create the plots and want to re-assign the data, you need to close
and reopen the window because the dialog box will not be available any more.
The available time gang plots to you are:
Time cross plot.
Time vs. depth plot.
The available depth gang plots to you are: Depth cross plot.
Broomstick plot.
Private
Copyright 2014 Schlumberger, Unpublished Work. All rights reserved.BGC
Documentation\DongYuan,
MohammadKhairiHamzah
,FrancescaKovaci
c\InTouchID#\1
.0\ReleaseDate:28-M
ar-2014\EDMSUID:1652317494\Produced
:28-M
ar-201408:46:15
http://swift.slb.com/http://swift.slb.com/ -
8/10/2019 PERFORM Toolkit 3 1 Release Notes 1.0 OnlinePDF
14/18
9 / Known Issues 9
7.2.3 Synchronized Log
The Position of the red line of the depth log in the synchronized log sometimes
will not synchronize with the time data.
7.2.4 Hydraulics
Hydraulic Model cannot handle Reamer while Drilling (RWD) BHA.
7.2.5 Rig State
Rig State will not compute continuously if you use CRPM as source of rotation
especially during tripping out or tripping in. Rig State will start to compute when
rotation is detected after the trip activity.
7.2.6 Wellbore Geometry
When you change OD or ID of an activity in the Wellbore Geometry, clicking the
Activity will produce an exception which would not affect PTK.
7.2.7 Plotting Plan Survey and Actual Survey on a DepthCross Plot
If the plan surveys are plotted together with the actual survey on the same axis
and you change the depth interval, the position of the two lines might switch.
7.2.8 DMM Wellbore Curvature Estimate (Bending)Computation
The software does not compute the Wellbore Curvature Estimate when the build
rate is 0.5 deg/100 ft and when the bending moment measurement is below
the model bending moment at 0 deg/100 ft. This is to ensure that the algorithm
outputs a high confidence estimation.
Private
Copyright 2014 Schlumberger, Unpublished Work. All rights reserved.BGC
Documentation\DongYuan,
MohammadKhairiHamzah
,FrancescaKovacic\InTouchID#\1
.0\ReleaseDate:28-M
ar-2014\EDMSUID:1652317494\Produced
:28-M
ar-201408:46:15
-
8/10/2019 PERFORM Toolkit 3 1 Release Notes 1.0 OnlinePDF
15/18
10 / Known Issues 10
7.2.9 Partial Underreamer/Hole opener support
PTK 3.1 supports the underreamer/borehole opener component computation in
the TAD and DMM Wellbore Curvature Estimate features. The computations
mentioned simulates the wellbore geometry with dual hole size (bit hole size from
bit to underreamer/hole opener and underreamer/hole opener cutter size to last
casing depth) during on-bottom drilling.
The software uses the Max Drill Hole Diameter parameter, which you input in
the BHA Editor, in the computation for the hole size above the underreamer or
holeopener BHA component.
The Tripping Load Analysis (TLA) and RT Hydraulics do not utilize the dual
hole size.
7.2.10 Sidetrack Wizard sequencing logic
The sidetrack wizard feature logic has been identified through the user Software
Modification Report (SMR) to not fully meet the user requirements. The issue
is not addressed in PTK 3.1.
7.2.11 Hydraulic Computation Performance
The fix in the logic of the hydraulics computation in PTK 3.1 has impacted the
computation speed.
The historical hydraulics computation takes a longer time in PTK 3.1 compared
to PTK 3.0 but produces more accurate results.
7.2.12 Actual Survey Update
PTK is not designed for complex survey management. When survey points from
a real-time data source come in PTK, they will be the same as the server ones
and you will not be able to make changes during the data streaming.
In offline mode you will be able to edit existing survey or create a new one. When
you re-establish the real-time connection, any survey at a deeper depth than
the existing ones will be appended and any survey at a shallower depth will be
discarded. This means that if you had made any changes, these will be retained.
Private
Copyright 2014 Schlumberger, Unpublished Work. All rights reserved.BGC
Documentation\DongYuan,
MohammadKhairiHamzah
,FrancescaKovaci
c\InTouchID#\1
.0\ReleaseDate:28-M
ar-2014\EDMSUID:1652317494\Produced
:28-M
ar-201408:46:15
-
8/10/2019 PERFORM Toolkit 3 1 Release Notes 1.0 OnlinePDF
16/18
11 / Known Issues 11
7.2.13 Annotations
The position of the plot annotations is not associated with the indexes or
values on the plots. This means that when you change the unit system, the
locations of the annotations will not change, even if the indexes are updated
to the new units.
The annotations text will not be visible when you print a log with MaxWell
header.
7.2.14 Importing/Exporting Issues DOX Related
When you import an ASCII format survey file into Drilling Office X 2.8, the
software will only take the first 3 columns in the following order: MD, inclination
and azimuth.
If you want to export the survey data to a CSV file from PTK for DOX 2.8 to
import it, please select Inclination as the first channel and Azimuth as the
second channel in the Select Channels dialog box.
7.2.15 Log Printing
When the AutoFitWidthcheck box is selected, and if there are many tracks in
the log, the index track may become too narrow, and the index number cannot
be printed out. To solve the problem, before printing, please make the indextrack wide enough to show the index number. For details about how to make
a track wider, please refer to To set the properties for a trackin section 12.3
Configuring Tracks in PTK Online Help.
7.2.16 Non-English Local Setting
PTK will not work properly in non-English local setting. Some features may not
work well and the Changepoint Detector is one of them. Please check Start>
Control Panel >Region and Language Options with Win 7.
Private
Copyright 2014 Schlumberger, Unpublished Work. All rights reserved.BGC
Documentation\DongYuan,
MohammadKhairiHamzah
,FrancescaKovacic\InTouchID#\1
.0\ReleaseDate:28-M
ar-2014\EDMSUID:1652317494\Produced
:28-M
ar-201408:46:15
-
8/10/2019 PERFORM Toolkit 3 1 Release Notes 1.0 OnlinePDF
17/18
12 / Known Issues 12
7.2.17 Problem with Running PTK Software WithoutAdministrator Privilege
PTK has to be installed and ran with administrator privilege, otherwise there willnot be full access to product files. Refer toInTouch Content ID 4227785for
information on how to handle the access right error.
7.2.18 Project Size
Some data files may not be cleaned and this causes the project folder size to
increase. It is suggested to run the fi le cleaner utility to reduce the project size.
7.2.19 Project StoragePTK stability issues can occur when you store the PTK project on the server
rather than the local drive. Refer to InTouch SQ Alert 001for more information.
7.2.20 PTK Data Source
The data source that is transmitting data to InterACT should not publish a
comment/text with &, which is a WITSML reserved character, otherwise the
download will not succeed.
7.2.21 Channel Names and Mapping
When a custom channel is published from PTK to InterACT, the maximum
number of characters for the channel name is limited to 32. If the length
exceeds the limit, the channel will not be published.
For a channel to be displayed in PTK, the maximum number of characters
for the channel name has to be less than 45. Please do not exceed this limit
when you do channel mapping, otherwise the channel will not be created in
the system.
If a channel is not defined in the PTK channel preference list, the channel
name will be by default set to the channel code. Typical examples are the
ROPO output channels which originally have descriptive names but these
are then overridden to channel code when written to PTK.
Private
Copyright 2014 Schlumberger, Unpublished Work. All rights reserved.BGC
Documentation\DongYuan,
MohammadKhairiHamzah
,FrancescaKovaci
c\InTouchID#\1
.0\ReleaseDate:28-M
ar-2014\EDMSUID:1652317494\Produced
:28-M
ar-201408:46:15
http://intouchsupport.com/index.cfm?event=content.preview&contentId=4227785http://intouchsupport.com/index.cfm?event=content.preview&contentId=6228807http://intouchsupport.com/index.cfm?event=content.preview&contentId=6228807http://intouchsupport.com/index.cfm?event=content.preview&contentId=4227785 -
8/10/2019 PERFORM Toolkit 3 1 Release Notes 1.0 OnlinePDF
18/18
13 / Known Issues 13
7.2.22 Tool Decoder Requires Specific Patch Version ofMSVSR80.dll
If your PC security check (S) is green, this patch has been automaticallyinstalled with MS windows patch, otherwise, you need to install the patch
manually at http://www.microsoft.com/downloads/info.aspx?na=41&srcfamilyid=
ae2e1a40-7b45-4fe9-a20f-2ed2923aca62&srcdisplaylang=en&u=http%3a%2f%
2fdownload.microsoft.com%2fdownload%2f8%2fB%2f4%2f8B42259F-5D70-4
3F4-AC2E-4B208FD8D66A%2fvcredist_x86.EXE
7.2.23 Source of Out-of-Memory Issue on the Time vs.Depth Plot
Refer toInTouch Content ID 5874948. The third party cross plot control in PTKhas a memory leak bug when PTK is showing the graphics objects representing
activities on the plot. Currently there is no workaround for this issue.
7.2.24 Non-supported Features
The DDC Service Provider (Start>Schlumberger> PERFORM Toolkit 3.0
>DDC Service Provider) is not available for PTK 3.1.
The MOC feature is no longer supported by PTK 3.1.
Some new BHA properties are not available in PTK such as:
Wearbands
Rotating bending limit moment
Non-Schlumberger motor parameters
Private
Copyright 2014 Schlumberger Unpublished Work All rights reservedGC
Documentation\DongYuan,
MohammadKhairiHamzah
,FrancescaKovacic\InTouchID#\1
.0\ReleaseDate:28-M
ar-2014\EDMSUID:1652317494\Produced
:28-M
ar-201408:46:15
http://www.microsoft.com/downloads/info.aspx?na=41&srcfamilyid=ae2e1a40-7b45-4fe9-a20f-2ed2923aca62&srcdisplaylang=en&u=http://download.microsoft.com/download/8/B/4/8B42259F-5D70-43F4-AC2E-4B208FD8D66A/vcredist_x86.EXEhttp://www.microsoft.com/downloads/info.aspx?na=41&srcfamilyid=ae2e1a40-7b45-4fe9-a20f-2ed2923aca62&srcdisplaylang=en&u=http://download.microsoft.com/download/8/B/4/8B42259F-5D70-43F4-AC2E-4B208FD8D66A/vcredist_x86.EXEhttp://www.microsoft.com/downloads/info.aspx?na=41&srcfamilyid=ae2e1a40-7b45-4fe9-a20f-2ed2923aca62&srcdisplaylang=en&u=http://download.microsoft.com/download/8/B/4/8B42259F-5D70-43F4-AC2E-4B208FD8D66A/vcredist_x86.EXEhttp://www.microsoft.com/downloads/info.aspx?na=41&srcfamilyid=ae2e1a40-7b45-4fe9-a20f-2ed2923aca62&srcdisplaylang=en&u=http://download.microsoft.com/download/8/B/4/8B42259F-5D70-43F4-AC2E-4B208FD8D66A/vcredist_x86.EXEhttp://intouchsupport.com/intouch/methodinvokerpage.cfm?caseid=5874948http://intouchsupport.com/intouch/methodinvokerpage.cfm?caseid=5874948http://www.microsoft.com/downloads/info.aspx?na=41&srcfamilyid=ae2e1a40-7b45-4fe9-a20f-2ed2923aca62&srcdisplaylang=en&u=http://download.microsoft.com/download/8/B/4/8B42259F-5D70-43F4-AC2E-4B208FD8D66A/vcredist_x86.EXEhttp://www.microsoft.com/downloads/info.aspx?na=41&srcfamilyid=ae2e1a40-7b45-4fe9-a20f-2ed2923aca62&srcdisplaylang=en&u=http://download.microsoft.com/download/8/B/4/8B42259F-5D70-43F4-AC2E-4B208FD8D66A/vcredist_x86.EXEhttp://www.microsoft.com/downloads/info.aspx?na=41&srcfamilyid=ae2e1a40-7b45-4fe9-a20f-2ed2923aca62&srcdisplaylang=en&u=http://download.microsoft.com/download/8/B/4/8B42259F-5D70-43F4-AC2E-4B208FD8D66A/vcredist_x86.EXEhttp://www.microsoft.com/downloads/info.aspx?na=41&srcfamilyid=ae2e1a40-7b45-4fe9-a20f-2ed2923aca62&srcdisplaylang=en&u=http://download.microsoft.com/download/8/B/4/8B42259F-5D70-43F4-AC2E-4B208FD8D66A/vcredist_x86.EXE